Tom Lane [Mon, 17 Dec 2018 00:38:57 +0000 (19:38 -0500)]
Modernize our code for looking up descriptive strings for Unix signals.
At least as far back as the 2008 spec, POSIX has defined strsignal(3)
for looking up descriptive strings for signal numbers. We hadn't gotten
the word though, and were still using the crufty old sys_siglist array,
which is in no standard even though most Unixen provide it.
Aside from not being formally standards-compliant, this was just plain
ugly because it involved #ifdef's at every place using the code.
To eliminate the #ifdef's, create a portability function pg_strsignal,
which wraps strsignal(3) if available and otherwise falls back to
sys_siglist[] if available. The set of Unixen with neither API is
probably empty these days, but on any platform with neither, you'll
just get "unrecognized signal". All extant callers print the numeric
signal number too, so no need to work harder than that.
Along the way, upgrade pg_basebackup's child-error-exit reporting
to match the rest of the system.
Tom Lane [Sun, 16 Dec 2018 19:51:47 +0000 (14:51 -0500)]
Make error handling in parallel pg_upgrade less bogus.
reap_child() basically ignored the possibility of either an error in
waitpid() itself or a child process failure on signal. We don't really
need to do more than report and crash hard, but proceeding as though
nothing is wrong is definitely Not Acceptable. The error report for
nonzero child exit status was pretty off-point, as well.
Noted while fooling around with child-process failure detection
logic elsewhere. It's been like this a long time, so back-patch to
all supported branches.
Tom Lane [Sun, 16 Dec 2018 19:32:14 +0000 (14:32 -0500)]
Improve detection of child-process SIGPIPE failures.
Commit ffa4cbd62 added logic to detect SIGPIPE failure of a COPY child
process, but it only worked correctly if the SIGPIPE occurred in the
immediate child process. Depending on the shell in use and the
complexity of the shell command string, we might instead get back
an exit code of 128 + SIGPIPE, representing a shell error exit
reporting SIGPIPE in the child process.
We could just hack up ClosePipeToProgram() to add the extra case,
but it seems like this is a fairly general issue deserving a more
general and better-documented solution. I chose to add a couple
of functions in src/common/wait_error.c, which is a natural place
to know about wait-result encodings, that will test for either a
specific child-process signal type or any child-process signal failure.
Then, adjust other places that were doing ad-hoc tests of this type
to use the common functions.
In RestoreArchivedFile, this fixes a race condition affecting whether
the process will report an error or just silently proc_exit(1): before,
that depended on whether the intermediate shell got SIGTERM'd itself
or reported a child process failing on SIGTERM.
Like the previous patch, back-patch to v10; we could go further
but there seems no real need to.
Tom Lane [Fri, 14 Dec 2018 17:52:49 +0000 (12:52 -0500)]
Make pg_statistic and related code account more honestly for collations.
When we first put in collations support, we basically punted on teaching
pg_statistic, ANALYZE, and the planner selectivity functions about that.
They've just used DEFAULT_COLLATION_OID independently of the actual
collation of the data. It's time to improve that, so:
* Add columns to pg_statistic that record the specific collation associated
with each statistics slot.
* Teach ANALYZE to use the column's actual collation when comparing values
for statistical purposes, and record this in the appropriate slot. (Note
that type-specific typanalyze functions are now expected to fill
stats->stacoll with the appropriate collation, too.)
* Teach assorted selectivity functions to use the actual collation of
the stats they are looking at, instead of just assuming it's
DEFAULT_COLLATION_OID.
This should give noticeably better results in selectivity estimates for
columns with nondefault collations, at least for query clauses that use
that same collation (which would be the default behavior in most cases).
It's still true that comparisons with explicit COLLATE clauses different
from the stored data's collation won't be well-estimated, but that's no
worse than before. Also, this patch does make the first step towards
doing better with that, which is that it's now theoretically possible to
collect stats for a collation other than the column's own collation.
Patch by me; thanks to Peter Eisentraut for review.
Michael Paquier [Thu, 13 Dec 2018 23:59:35 +0000 (08:59 +0900)]
Introduce new extended routines for FDW and foreign server lookups
The cache lookup routines for foreign-data wrappers and foreign servers
are extended with an extra argument to handle a set of flags. The only
value which can be used now is to indicate if a missing object should
result in an error or not, and are designed to be extensible on need.
Those new routines are added into the existing set of user-visible
FDW APIs and documented in consequence. They will be used for future
patches to improve the SQL interface for object addresses.
Author: Michael Paquier Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
Andres Freund [Thu, 13 Dec 2018 22:50:57 +0000 (14:50 -0800)]
Create a separate oid range for oids assigned by genbki.pl.
The changes I made in 578b229718e assigned oids below
FirstBootstrapObjectId to objects in include/catalog/*.dat files that
did not have an oid assigned, starting at the max oid explicitly
assigned. Tom criticized that for mainly two reasons:
1) It's not clear which values are manually and which explicitly
assigned.
2) The space below FirstBootstrapObjectId gets pretty crowded, and
some PostgreSQL forks have used oids >= 9000 for their own objects,
to avoid conflicting.
Thus create a new range for objects not assigned explicit oids, but
assigned by genbki.pl. For now 1-9999 is for explicitly assigned oids,
FirstGenbkiObjectId (10000) to FirstBootstrapObjectId (1200) -1 is for
genbki.pl assigned oids, and < FirstNormalObjectId (16384) is for oids
assigned during bootstrap. It's possible that we'll have to adjust
these boundaries, but there's some headroom for now.
Add a note suggesting that oids in forks should be assigned in the
9000-9999 range.
Catversion bump for obvious reasons.
Per complaint from Tom Lane.
Author: Andres Freund
Discussion: https://postgr.es/m/16845.1544393682@sss.pgh.pa.us
Tom Lane [Thu, 13 Dec 2018 20:11:09 +0000 (15:11 -0500)]
Fix bogus logic for skipping unnecessary partcollation dependencies.
The idea here is to not call recordDependencyOn for the default collation,
since we know that's pinned. But what the code actually did was to record
the partition key's dependency on the opclass twice, instead.
Evidently introduced by sloppy coding in commit 2186b608b. Back-patch
to v10 where that came in.
Tom Lane [Thu, 13 Dec 2018 18:24:43 +0000 (13:24 -0500)]
Drop no-op CoerceToDomain nodes from expressions at planning time.
If a domain has no constraints, then CoerceToDomain doesn't really do
anything and can be simplified to a RelabelType. This not only
eliminates cycles at execution, but allows the planner to optimize better
(for instance, match the coerced expression to an index on the underlying
column). However, we do have to support invalidating the plan later if
a constraint gets added to the domain. That's comparable to the case of
a change to a SQL function that had been inlined into a plan, so all the
necessary logic already exists for plans depending on functions. We
need only duplicate or share that logic for domains.
ALTER DOMAIN ADD/DROP CONSTRAINT need to be taught to send out sinval
messages for the domain's pg_type entry, since those operations don't
update that row. (ALTER DOMAIN SET/DROP NOT NULL do update that row,
so no code change is needed for them.)
Testing this revealed what's really a pre-existing bug in plpgsql:
it caches the SQL-expression-tree expansion of type coercions and
had no provision for invalidating entries in that cache. Up to now
that was only a problem if such an expression had inlined a SQL
function that got changed, which is unlikely though not impossible.
But failing to track changes of domain constraints breaks an existing
regression test case and would likely cause practical problems too.
We could fix that locally in plpgsql, but what seems like a better
idea is to build some generic infrastructure in plancache.c to store
standalone expressions and track invalidation events for them.
(It's tempting to wonder whether plpgsql's "simple expression" stuff
could use this code with lower overhead than its current use of the
heavyweight plancache APIs. But I've left that idea for later.)
Other stuff fixed in passing:
* Allow estimate_expression_value() to drop CoerceToDomain
unconditionally, effectively assuming that the coercion will succeed.
This will improve planner selectivity estimates for cases involving
estimatable expressions that are coerced to domains. We could have
done this independently of everything else here, but there wasn't
previously any need for eval_const_expressions_mutator to know about
CoerceToDomain at all.
* Use a dlist for plancache.c's list of cached plans, rather than a
manually threaded singly-linked list. That eliminates a potential
performance problem in DropCachedPlan.
* Fix a couple of inconsistencies in typecmds.c about whether
operations on domains drop RowExclusiveLock on pg_type. Our common
practice is that DDL operations do drop catalog locks, so standardize
on that choice.
Prevent GIN deleted pages from being reclaimed too early
When GIN vacuum deletes a posting tree page, it assumes that no concurrent
searchers can access it, thanks to ginStepRight() locking two pages at once.
However, since 9.4 searches can skip parts of posting trees descending from the
root. That leads to the risk that page is deleted and reclaimed before
concurrent search can access it.
This commit prevents the risk of above by waiting for every transaction, which
might wait to reference this page, to finish. Due to binary compatibility
we can't change GinPageOpaqueData to store corresponding transaction id.
Instead we reuse page header pd_prune_xid field, which is unused in index pages.
Discussion: https://postgr.es/m/31a702a.14dd.166c1366ac1.Coremail.chjischj%40163.com
Author: Andrey Borodin, Alexander Korotkov Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
On standby ginRedoDeletePage() can work concurrently with read-only queries.
Those queries can traverse posting tree in two ways.
1) Using rightlinks by ginStepRight(), which locks the next page before
unlocking its left sibling.
2) Using downlinks by ginFindLeafPage(), which locks at most one page at time.
Original lock order was: page, parent, left sibling. That lock order can
deadlock with ginStepRight(). In order to prevent deadlock this commit changes
lock order to: left sibling, page, parent. Note, that position of parent in
locking order seems insignificant, because we only lock one page at time while
traversing downlinks.
Reported-by: Chen Huajun Diagnosed-by: Chen Huajun, Peter Geoghegan, Andrey Borodin
Discussion: https://postgr.es/m/31a702a.14dd.166c1366ac1.Coremail.chjischj%40163.com
Author: Alexander Korotkov
Backpatch-through: 9.4
Fix deadlock in GIN vacuum introduced by 218f51584d5
Before 218f51584d5 if posting tree page is about to be deleted, then the whole
posting tree is locked by LockBufferForCleanup() on root preventing all the
concurrent inserts. 218f51584d5 reduced locking to the subtree containing
page to be deleted. However, due to concurrent parent split, inserter doesn't
always holds pins on all the pages constituting path from root to the target
leaf page. That could cause a deadlock between GIN vacuum process and GIN
inserter. And we didn't find non-invasive way to fix this.
This commit reverts VACUUM behavior to lock the whole posting tree before
delete any page. However, we keep another useful change by 218f51584d5: the
tree is locked only if there are pages to be deleted.
Reported-by: Chen Huajun Diagnosed-by: Chen Huajun, Andrey Borodin, Peter Geoghegan
Discussion: https://postgr.es/m/31a702a.14dd.166c1366ac1.Coremail.chjischj%40163.com
Author: Alexander Korotkov, based on ideas from Andrey Borodin and Peter Geoghegan Reviewed-by: Andrey Borodin
Backpatch-through: 10
Tom Lane [Wed, 12 Dec 2018 21:08:30 +0000 (16:08 -0500)]
Repair bogus EPQ plans generated for postgres_fdw foreign joins.
postgres_fdw's postgresGetForeignPlan() assumes without checking that the
outer_plan it's given for a join relation must have a NestLoop, MergeJoin,
or HashJoin node at the top. That's been wrong at least since commit 4bbf6edfb (which could cause insertion of a Sort node on top) and it seems
like a pretty unsafe thing to Just Assume even without that.
Through blind good fortune, this doesn't seem to have any worse
consequences today than strange EXPLAIN output, but it's clearly trouble
waiting to happen.
To fix, test the node type explicitly before touching Join-specific
fields, and avoid jamming the new tlist into a node type that can't
do projection. Export a new support function from createplan.c
to avoid building low-level knowledge about the latter into FDWs.
Back-patch to 9.6 where the faulty coding was added. Note that the
associated regression test cases don't show any changes before v11,
apparently because the tests back-patched with 4bbf6edfb don't actually
exercise the problem case before then (there's no top-level Sort
in those plans).
Tom Lane [Wed, 12 Dec 2018 18:49:41 +0000 (13:49 -0500)]
Repair bogus handling of multi-assignment Params in upper plan levels.
Our support for multiple-set-clauses in UPDATE assumes that the Params
referencing a MULTIEXPR_SUBLINK SubPlan will appear before that SubPlan
in the targetlist of the plan node that calculates the updated row.
(Yeah, it's a hack...) In some PG branches it's possible that a Result
node gets inserted between the primary calculation of the update tlist
and the ModifyTable node. setrefs.c did the wrong thing in this case
and left the upper-level Params as Params, causing a crash at runtime.
What it should do is replace them with "outer" Vars referencing the child
plan node's output. That's a result of careless ordering of operations
in fix_upper_expr_mutator, so we can fix it just by reordering the code.
Fix fix_join_expr_mutator similarly for consistency, even though join
nodes could never appear in such a context. (In general, it seems
likely to be a bit cheaper to use Vars than Params in such situations
anyway, so this patch might offer a tiny performance improvement.)
The hazard extends back to 9.5 where the MULTIEXPR_SUBLINK stuff
was introduced, so back-patch that far. However, this may be a live
bug only in 9.6.x and 10.x, as the other branches don't seem to want
to calculate the final tlist below the Result node. (That plan shape
change between branches might be a mini-bug in itself, but I'm not
really interested in digging into the reasons for that right now.
Still, add a regression test memorializing what we expect there,
so we'll notice if it changes again.)
Michael Paquier [Wed, 12 Dec 2018 00:49:39 +0000 (09:49 +0900)]
Tweak pg_partition_tree for undefined relations and unsupported relkinds
This fixes a crash which happened when calling the function directly
with a relation OID referring to a non-existing object, and changes the
behavior so as NULL is returned for unsupported relkinds instead of
generating an error. This puts the new function in line with many other
system functions, and eases actions like full scans of pg_class.
Author: Michael Paquier Reviewed-by: Amit Langote, Stephen Frost
Discussion: https://postgr.es/m/20181207010406.GO2407@paquier.xyz
Tom Lane [Tue, 11 Dec 2018 16:48:00 +0000 (11:48 -0500)]
Fix test_rls_hooks to assign expression collations properly.
This module overlooked this necessary fixup step on the results of
transformWhereClause(). It accidentally worked anyway, because the
constructed expression involved type "name" which is not collatable,
but it fell over while I was experimenting with changing "name" to
be collatable.
Back-patch, not because there's any live bug here in back branches,
but because somebody might use this code as a model for some real
application and then not understand why it doesn't work.
Tom Lane [Tue, 11 Dec 2018 16:21:36 +0000 (11:21 -0500)]
Doc: improve documentation about ALTER LARGE OBJECT requirements.
Unlike other ALTER ref pages, this one neglected to mention that
ALTER OWNER requires being a member of the new owning role.
Per bug #15546 from Stefan Kadow.
Noah Misch [Tue, 11 Dec 2018 04:15:42 +0000 (20:15 -0800)]
Raise some timeouts to 180s, in test code.
Slow runs of buildfarm members chipmunk, hornet and mandrill saw the
shorter timeouts expire. The 180s timeout in poll_query_until has been
trouble-free since 2a0f89cd717ce6d49cdc47850577823682167e87 introduced
it two years ago, so use 180s more widely. Back-patch to 9.6, where the
first of these timeouts was introduced.
Stephen Frost [Mon, 10 Dec 2018 14:31:38 +0000 (09:31 -0500)]
Remove dead code in toast_fetch_datum_slice
In toast_fetch_datum_slice(), we Assert() that what is passed in isn't
compressed, but we then later had a check to see what the length of if
what was passed in is compressed. That later check is rather confusing
since toast_fetch_datum_slice() is only ever called with non-compressed
datums and the Assert() earlier makes it clear that one shouldn't be
passing in compressed datums.
Add a comment to make it clear that toast_fetch_datum_slice() is just
for non-compressed datums, and remove the dead code.
Michael Paquier [Mon, 10 Dec 2018 06:00:59 +0000 (15:00 +0900)]
Ensure cleanup of orphan archive status files
When a WAL segment is recycled, its ".ready" and ".done" status files
get also automatically removed, however this is not done in a durable
manner. Hence, in a subsequent crash, it could be possible that a
".ready" status file is still around with its corresponding segment
already gone.
If the backend reaches such a state, the archive command would most
likely complain about a segment non-existing and would keep retrying,
causing WAL segments to bloat pg_wal/, potentially making Postgres crash
hard when running out of space.
As status files are removed after each individual segment, using
durable_unlink() does not completely close the window either, as a crash
could happen between the moment the WAL segment is recycled and the
moment its status files are removed. This has also some performance
impact with the additional fsync() calls needed to make the removal in a
durable manner. Doing the cleanup at recovery is not cost-free either
as this makes crash recovery potentially take longer than necessary.
So, instead, as per an idea of Stephen Frost, make the archiver aware of
orphan status files and remove them on-the-fly if the corresponding
segment goes missing. Removal failures follow a model close to what
happens for WAL segments, where multiple attempts are done before giving
up temporarily, and where a successful orphan removal makes the archiver
move immediately to the next WAL segment thought as ready to be
archived.
Author: Michael Paquier Reviewed-by: Nathan Bossart, Andres Freund, Stephen Frost, Kyotaro
Horiguchi
Discussion: https://postgr.es/m/20180928032827.GF1500@paquier.xyz
Michael Paquier [Sun, 9 Dec 2018 07:35:06 +0000 (16:35 +0900)]
Add timestamp of last received message from standby to pg_stat_replication
The timestamp generated by the standby at message transmission has been
included in the protocol since its introduction for both the status
update message and hot standby feedback message, but it has never
appeared in pg_stat_replication. Seeing this timestamp does not matter
much with a cluster which has a lot of activity, but on a mostly-idle
cluster, this makes monitoring able to react faster than the configured
timeouts.
Author: MyungKyu LIM Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/1657809367.407321.1533027417725.JavaMail.jboss@ep2ml404
Tom Lane [Fri, 7 Dec 2018 21:40:58 +0000 (16:40 -0500)]
Doc: document that we expect CHECK constraint conditions to be immutable.
This restriction is implicit in the check-only-once implementation we use
for table and domain constraints, but it wasn't spelled out anywhere, nor
was there any advice about how to alter a constraint's behavior safely.
Improve that.
I was also dissatisfied with the documentation of ALTER DOMAIN VALIDATE
CONSTRAINT, which entirely failed to explain the use of that feature; and
thence decided that ALTER TABLE VALIDATE CONSTRAINT could be documented
better as well.
Perhaps we should back-patch this, along with the related commit 36d442a25,
but for now I refrained.
Tom Lane [Fri, 7 Dec 2018 18:11:30 +0000 (13:11 -0500)]
In PQprint(), write HTML table trailer before closing the output pipe.
This is an astonishingly ancient bit of silliness, dating AFAICS to
commit edb519b14 of 27-Jul-1996 which added the pipe close stanza in
the wrong place. It happens to be harmless given that the code above
this won't enable the pager if html3 output mode is selected. Still,
somebody might try to relax that restriction someday, and in any case
it could confuse readers and static analysis tools, so let's fix it in
HEAD.
Tom Lane [Fri, 7 Dec 2018 17:11:59 +0000 (12:11 -0500)]
Fix misapplication of pgstat_count_truncate to wrong relation.
The stanza of ExecuteTruncate[Guts] that truncates a target table's toast
relation re-used the loop local variable "rel" to reference the toast rel.
This was safe enough when written, but commit d42358efb added code below
that that supposed "rel" still pointed to the parent table. Therefore,
the stats counter update was applied to the wrong relcache entry (the
toast rel not the user rel); and if we were unlucky and that relcache
entry had been flushed during reindex_relation, very bad things could
ensue.
(I'm surprised that CLOBBER_CACHE_ALWAYS testing hasn't found this.
I'm even more surprised that the problem wasn't detected during the
development of d42358efb; it must not have been tested in any case
with a toast table, as the incorrect stats counts are very obvious.)
To fix, replace use of "rel" in that code branch with a more local
variable. Adjust test cases added by d42358efb so that some of them
use tables with toast tables.
Per bug #15540 from Pan Bian. Back-patch to 9.5 where d42358efb came in.
Tom Lane [Fri, 7 Dec 2018 16:02:39 +0000 (11:02 -0500)]
Clean up sloppy coding in publicationcmds.c's OpenTableList().
Remove dead code (which would be incorrect if it weren't dead),
per report from Pan Bian. Add a CHECK_FOR_INTERRUPTS in the
inner loop over child relations, because there's little point
in having one in the outer loop if there's not one here too.
Minor stylistic adjustments and comment improvements.
Seems to be aboriginal to this code (cf commit 665d1fad9).
Back-patch to v10 where that came in, not because any of this
is significant, but just to keep the branches looking similar.
Tom Lane [Thu, 6 Dec 2018 20:08:44 +0000 (15:08 -0500)]
Improve our response to invalid format strings, and detect more cases.
Places that are testing for *printf failure ought to include the format
string in their error reports, since bad-format-string is one of the
more likely causes of such failure. This both makes it easier to find
and repair the mistake, and provides at least some useful info to the
user who stumbles across such a problem.
Also, tighten snprintf.c to report EINVAL for an invalid flag or
final character in a format %-spec (including the case where the
%-spec is missing a final character altogether). This seems like
better project policy, and it also allows removing an instruction
or two from the hot code path.
Back-patch the error reporting change in pvsnprintf, since it should be
harmless and may be helpful; but not the snprintf.c change.
Per discussion of bug #15511 from Ertuğrul Kahveci, which reported an
invalid translated format string. These changes don't fix that error,
but they should improve matters next time we make such a mistake.
Stephen Frost [Thu, 6 Dec 2018 16:39:09 +0000 (11:39 -0500)]
Improve planner stats documentation
It was pointed out that in the planner stats documentation under
Extended Statistics, one of the sentences was a bit awkward. Improve
that by rewording it slightly.
Stephen Frost [Thu, 6 Dec 2018 16:11:21 +0000 (11:11 -0500)]
Cleanup minor pg_dump memory leaks
In dumputils, we may have successfully parsed the acls when we discover
that we can't parse the reverse ACLs and then return- check and free
aclitems if that happens.
In dumpTableSchema, move ftoptions and srvname under the relkind !=
RELKIND_VIEW branch (since they're only used there) and then check if
they've been allocated and, if so, free them at the end of that block.
Pointed out by Pavel Raiskup, though I didn't use those patches.
Stephen Frost [Thu, 6 Dec 2018 16:05:39 +0000 (11:05 -0500)]
Cleanup comments in xlog compression
Skipping over the "hole" in full page images in the XLOG code was
described as being a form of compression, but this got a bit confusing
since we now have PGLZ-based compression happening, so adjust the
wording to discuss "removing" the "hole" and keeping the talk about
compression to where we're talking about using PGLZ-based compression of
the full page images.
Tatsuo Ishii [Thu, 6 Dec 2018 03:15:15 +0000 (12:15 +0900)]
Change true/false to on/off.
We prefer to use on/off than true/false for boolean configuration
parameters in the documentation, but there were a few places where
true/false were still used.
Alvaro Herrera [Wed, 5 Dec 2018 16:31:51 +0000 (13:31 -0300)]
Don't mark partitioned indexes invalid unnecessarily
When an indexes is created on a partitioned table using ONLY (don't
recurse to partitions), it gets marked invalid until index partitions
are attached for each table partition. But there's no reason to do this
if there are no partitions ... and moreover, there's no way to get the
index to become valid afterwards, because all partitions that get
created/attached get their own index partition already attached to the
parent index, so there's no chance to do ALTER INDEX ... ATTACH PARTITION
that would make the parent index valid.
Fix by not marking the index as invalid to begin with.
This is very similar to 9139aa19423b, but the pg_dump aspect does not
appear to be relevant until we add FKs that can point to PKs on
partitioned tables. (I tried to cause the pg_upgrade test to break by
leaving some of these bogus tables around, but wasn't able to.)
Making this change means that an index that was supposed to be invalid
in the insert_conflict regression test is no longer invalid; reorder the
DDL so that the test continues to verify the behavior we want it to.
Author: Álvaro Herrera Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20181203225019.2vvdef2ybnkxt364@alvherre.pgsql
Etsuro Fujita [Tue, 4 Dec 2018 08:18:58 +0000 (17:18 +0900)]
postgres_fdw: Improve cost and size estimation for aggregate pushdown.
In commit 7012b132d07c2b4ea15b0b3cb1ea9f3278801d98, which added aggregate
pushdown to postgres_fdw, we didn't account for the evaluation cost and the
selectivity of HAVING quals attached to ForeignPaths performing aggregate
pushdown, as core had never accounted for that for AggPaths and GroupPaths.
And we didn't set these values of the locally-checked quals (ie, fpinfo's
local_conds_cost and local_conds_sel), which were initialized to zeros, but
since estimate_path_cost_size factors in these to estimate the result size
and the evaluation cost of such a ForeignPath when the use_remote_estimate
option is enabled, this caused it to produce underestimated results in that
case.
By commit 7b6c07547190f056b0464098bb5a2247129d7aa2 core was changed so that
it accounts for the evaluation cost and the selectivity of HAVING quals in
aggregation paths, so change the postgres_fdw's aggregate pushdown code as
well as such. This not only fixes the underestimation issue mentioned
above, but improves the estimation using local statistics in that function
when that option is disabled.
This would be a bug fix rather than an improvement, but apply it to HEAD
only to avoid destabilizing existing plan choices.
Tom Lane [Mon, 3 Dec 2018 16:40:49 +0000 (11:40 -0500)]
Refactor documentation about privileges to centralize the info.
Expand section 5.6 "Privileges" to include the full definition of
each privilege type, and an explanation of aclitem privilege displays,
along with some helpful summary tables. Most of this material came
out of the GRANT reference page, although some of it is new.
Adjust a bunch of links that were pointing to GRANT to point to 5.6.
Fabien Coelho and Tom Lane, reviewed by Bradley DeJong
Michael Paquier [Mon, 3 Dec 2018 00:27:35 +0000 (09:27 +0900)]
Add PGXS options to control TAP and isolation tests, take two
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile rules have been accumulated across the tree
to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. Note that tests of contrib/bloom/
are not enabled yet, as those are proving unstable in the buildfarm.
Author: Michael Paquier Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
Tom Lane [Sat, 1 Dec 2018 22:19:51 +0000 (17:19 -0500)]
Eliminate parallel-make hazard in ecpg/preproc.
Re-making ecpglib's typename.o is dangerous because another make thread
could be doing that at the same time. While we've not heard field
complaints traceable to this, it seems inevitable that it'd bite someone
eventually. Instead, symlink typename.c into the preproc directory and
recompile it there. That file is small enough that compiling it twice
isn't much of a penalty. Furthermore, this way we get a .o file that's
made without shlib CFLAGS, which seems cleaner.
This requires adding more stuff to the module's -I list. The MSVC
aspect of that is untested, but I'm sure the buildfarm will tell me
if I got it wrong.
Per a suggestion from Peter Eisentraut. Although this is theoretically
a bug fix, the lack of field reports makes me feel we needn't back-patch.
Tom Lane [Sat, 1 Dec 2018 21:34:00 +0000 (16:34 -0500)]
Rename ecpg's various "extern.h" files to have distinct names.
This should reduce confusion, and in particular make it safe to
copy typename.c into preproc/ and compile it there.
This doesn't affect anything outside ecpg, and particularly not
end users, because these files don't get installed; they just
exist to share declarations among the .c files of each subdirectory.
Tom Lane [Sat, 1 Dec 2018 20:45:11 +0000 (15:45 -0500)]
Add a --socketdir option to pg_upgrade.
This allows control of the directory in which the postmaster sockets
are created for the temporary postmasters started by pg_upgrade.
The default location remains the current working directory, which is
typically fine, but if it is deeply nested then its pathname might
be too long to be a socket name.
In passing, clean up some messiness in pg_upgrade's option handling,
particularly the confusing and undocumented way that configuration-only
datadirs were handled. And fix check_required_directory's substantially
under-baked cleanup of directory pathnames.
Daniel Gustafsson, reviewed by Hironobu Suzuki, some code cleanup by me
Michael Paquier [Fri, 30 Nov 2018 22:53:18 +0000 (07:53 +0900)]
Fix tablespace path TAP test of pg_verify_checksums for msys
TAP tests on msys need to run with the DTK perl, which understands msys
virtualized paths. Postgres, however, does not understand such paths,
so before a path can be used safely with CREATE TABLESPACE, it needs to
be translated into a path on the underlying file system.
Per report from buildfarm member jacana. Suggested fix is from Andrew
Dunstan.
Michael Paquier [Fri, 30 Nov 2018 01:34:45 +0000 (10:34 +0900)]
Fix various checksum check problems for pg_verify_checksums and base backups
Three issues are fixed in this patch:
- Base backups forgot to ignore files specific to EXEC_BACKEND, leading
to spurious warnings when checksums are enabled, per analysis from me.
- pg_verify_checksums forgot about files specific to EXEC_BACKEND,
leading to failures of the tool on any such build, particularly Windows.
This error was originally found by newly-introduced TAP tests in various
buildfarm members using EXEC_BACKEND.
- pg_verify_checksums forgot to count for temporary files and temporary
paths, which could be valid relation files, without checksums, per
report from Andres Freund. More tests are added to cover this case.
A new test case which emulates corruption for a file in a different
tablespace is added, coming from from Michael Banck, while I have coded
the main code and refactored the test code.
Author: Michael Banck, Michael Paquier Reviewed-by: Stephen Frost, David Steele
Discussion: https://postgr.es/m/20181021134206.GA14282@paquier.xyz
Michael Paquier [Fri, 30 Nov 2018 01:14:58 +0000 (10:14 +0900)]
Switch pg_verify_checksums back to a blacklist
This basically reverts commit d55241af705667d4503638e3f77d3689fd6be31,
leaving around a portion of the regression tests still adapted with
empty relation files, and corrupted cases. This is also proving to be
failing to check properly relation files located in a non-default
tablespace path.
Per discussion with various folks, including Stephen Frost, David
Steele, Andres Freund, Michael Banck and myself.
Reported-by: Michael Banck
Discussion: https://postgr.es/m/20181021134206.GA14282@paquier.xyz
Backpatch-through: 11
Tom Lane [Thu, 29 Nov 2018 23:28:10 +0000 (18:28 -0500)]
Document handling of invalid/ambiguous timestamp input near DST boundaries.
The source code comments documented this, but the user-facing docs, not
so much. Add a section to Appendix B that discusses it.
In passing, improve a couple other things in Appendix B --- notably,
a long-obsolete claim that time zone abbreviations are looked up in
a fixed table.
Alvaro Herrera [Thu, 29 Nov 2018 21:42:53 +0000 (18:42 -0300)]
Add log_statement_sample_rate parameter
This allows to set a lower log_min_duration_statement value without
incurring excessive log traffic (which reduces performance). This can
be useful to analyze workloads with lots of short queries.
Author: Adrien Nayrat Reviewed-by: David Rowley, Vik Fearing
Discussion: https://postgr.es/m/c30ee535-ee1e-db9f-fa97-146b9f62caed@anayrat.info
Tom Lane [Thu, 29 Nov 2018 20:53:44 +0000 (15:53 -0500)]
Ensure static libraries have correct mod time even if ranlib messes it up.
In at least Apple's version of ranlib, the output file is updated to have
a mod time equal to the max of the timestamps of its components, and that
data only has seconds precision. On a filesystem with sub-second file
timestamp precision --- say, APFS --- this can result in the finished
static library appearing older than its input files, which causes useless
rebuilds and possible outright failures in parallel makes.
We've only seen this reported in the field from people using Apple's
ranlib with a non-Apple make, because Apple's make doesn't know about
sub-second timestamps either so it doesn't decide rebuilds are needed.
But Apple's ranlib presumably shares code with at least some BSDen,
so it's not that unlikely that the same problem could arise elsewhere.
To fix, just "touch" the output file after ranlib finishes.
We seem to need this in only one place. There are other calls of
ranlib in our makefiles, but they are working on intermediate files
whose timestamps are not actually important, or else on an installed
static library for which sub-second timestamp precision is unlikely
to matter either. (Also, so far as I can tell, Apple's ranlib doesn't
mess up the file timestamp in the latter usage anyhow.)
In passing, change "ranlib" to "$(RANLIB)" in one place that was
bypassing the make macro for no good reason.
Per bug #15525 from Jack Kelly (via Alyssa Ross).
Back-patch to all supported branches.
Peter Eisentraut [Thu, 29 Nov 2018 12:58:28 +0000 (13:58 +0100)]
doc: Add appendix detailing some limits of PostgreSQL
This used to be on the web site but was removed. The documentation is
a better place for it anyway.
Author: David Rowley <david.rowley@2ndquadrant.com> Reviewed-by: John Naylor <jcnaylor@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAKJS1f_dKdejdKB94nKZC9S5NzB-UZRcAKkE84e=JEEecDuotg@mail.gmail.com/
Michael Paquier [Thu, 29 Nov 2018 01:31:12 +0000 (10:31 +0900)]
Add support for NO_INSTALLCHECK in MSVC scripts
When fetching a list of tests for a given extension in contrib/ or
src/test/modules/, NO_INSTALLCHECK now gets checked first. If present,
an empty list of tests is returned to let the caller know that tests
for this module need to be bypassed.
This actually fixes a set of issues with MSVC with modules using
REGRESS_OPTS, as an incorrect parsing caused the launched command
to eat the first test listed. The actual effect on the tree is that
several modules listed a single test, so regressions have been running
with no actual tests. pg_stat_statements, test_rls_hooks and commit_ts
were impacted by that. Some other modules like test_decoding (or
snapshot_too_old) don't use yet PGXS rules, but their makefiles will
soon be refactored with an upcoming patch.
Author: Michael Paquier Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20181126054302.GI1776@paquier.xyz
Michael Paquier [Thu, 29 Nov 2018 00:39:07 +0000 (09:39 +0900)]
Add missing NO_INSTALLCHECK in commit_ts and test_rls_hooks
This bypasses installcheck if specified, which makes sense for those
modules as they require non-default configuration, something which
typical users don't have. Those have been missing from the start, still
no back-patch is done.
This will be used by an upcoming patch for MSVC scripts adding support
for NO_INSTALLCHECK as installcheck is the default mode for contrib and
modules for performance reasons in the buildfarm.
Author: Michael Paquier Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20181126054302.GI1776@paquier.xyz
Michael Paquier [Thu, 29 Nov 2018 00:12:19 +0000 (09:12 +0900)]
Fix handling of synchronous replication for stopping WAL senders
This fixes an oversight from c6c3334 which forgot that if a subset of
WAL senders are stopping and in a sync state, other WAL senders could
still be waiting for a WAL position to be synced while committing a
transaction. However the subset of stopping senders would not release
waiters, potentially breaking synchronous replication guarantees. This
commit makes sure that even WAL senders stopping are able to release
waiters and are tracked properly.
On 9.4, this can also trigger an assertion failure when setting for
example max_wal_senders to 1 where a WAL sender is not able to find
itself as in synchronous state when the instance stops.
Reported-by: Paul Guo
Author: Paul Guo, Michael Paquier
Discussion: https://postgr.es/m/CAEET0ZEv8VFqT3C-cQm6byOB4r4VYWcef1J21dOX-gcVhCSpmA@mail.gmail.com
Backpatch-through: 9.4
Peter Geoghegan [Wed, 28 Nov 2018 22:42:54 +0000 (14:42 -0800)]
Have BufFileSize() ereport() on FileSize() failure.
Move the responsibility for checking for and reporting a failure from
the only current BufFileSize() caller, logtape.c, to BufFileSize()
itself. Code within buffile.c is generally responsible for interfacing
with fd.c to report irrecoverable failures. This seems like a
convention that's worth sticking to.
Reorganizing things this way makes it easy to make the error message
raised in the event of BufFileSize() failure descriptive of the
underlying problem. We're now clear on the distinction between
temporary file name and BufFile name, and can show errno, confident that
its value actually relates to the error being reported. In passing, an
existing, similar buffile.c ereport() + errcode_for_file_access() site
is changed to follow the same conventions.
The API of the function BufFileSize() is changed by this commit, despite
already being in a stable release (Postgres 11). This seems acceptable,
since the BufFileSize() ABI was changed by commit aa551830421, which
hasn't made it into a point release yet. Besides, it's difficult to
imagine a third party BufFileSize() caller not just raising an error
anyway, since BufFile state should be considered corrupt when
BufFileSize() fails.
Per complaint from Tom Lane.
Discussion: https://postgr.es/m/26974.1540826748@sss.pgh.pa.us
Backpatch: 11-, where shared BufFiles were introduced.
Peter Eisentraut [Wed, 28 Nov 2018 11:36:49 +0000 (12:36 +0100)]
Only allow one recovery target setting
The previous recovery.conf regime accepted multiple recovery_target*
settings and used the last one. This does not translate well to the
general GUC system. Specifically, under EXEC_BACKEND, the settings
are written out not in any particular order, so the order in which
they were originally set is not available to new processes.
Rather than redesign the GUC system, it was decided to abandon the old
behavior and only allow one recovery target setting. A second setting
will cause an error. However, it is allowed to set the same parameter
multiple times or unset a parameter and set a different one.
Thomas Munro [Wed, 28 Nov 2018 01:00:57 +0000 (14:00 +1300)]
Don't set PAM_RHOST for Unix sockets.
Since commit 2f1d2b7a we have set PAM_RHOST to "[local]" for Unix
sockets. This caused Linux PAM's libaudit integration to make DNS
requests for that name. It's not exactly clear what value PAM_RHOST
should have in that case, but it seems clear that we shouldn't set it
to an unresolvable name, so don't do that.
Back-patch to 9.6. Bug #15520.
Author: Thomas Munro Reviewed-by: Peter Eisentraut Reported-by: Albert Schabhuetl
Discussion: https://postgr.es/m/15520-4c266f986998e1c5%40postgresql.org
Tomas Vondra [Wed, 28 Nov 2018 00:11:15 +0000 (01:11 +0100)]
Do not decode TOAST data for table rewrites
During table rewrites (VACUUM FULL and CLUSTER), the main heap is logged
using XLOG / FPI records, and thus (correctly) ignored in decoding.
But the associated TOAST table is WAL-logged as plain INSERT records,
and so was logically decoded and passed to reorder buffer.
That has severe consequences with TOAST tables of non-trivial size.
Firstly, reorder buffer has to keep all those changes, possibly spilling
them to a file, incurring I/O costs and disk space.
Secondly, ReoderBufferCommit() was stashing all those TOAST chunks into
a hash table, which got discarded only after processing the row from the
main heap. But as the main heap is not decoded for rewrites, this never
happened, so all the TOAST data accumulated in memory, resulting either
in excessive memory consumption or OOM.
The fix is simple, as commit e9edc1ba already introduced infrastructure
(namely HEAP_INSERT_NO_LOGICAL flag) to skip logical decoding of TOAST
tables, but it only applied it to system tables. So simply use it for
all TOAST data in raw_heap_insert().
That would however solve only the memory consumption issue - the TOAST
changes would still be decoded and added to the reorder buffer, and
spilled to disk (although without TOAST tuple data, so much smaller).
But we can solve that by tweaking DecodeInsert() to just ignore such
INSERT records altogether, using XLH_INSERT_CONTAINS_NEW_TUPLE flag,
instead of skipping them later in ReorderBufferCommit().
Review: Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/flat/1a17c643-e9af-3dba-486b-fbe31bc1823a%402ndquadrant.com
Backpatch: 9.4-, where logical decoding was introduced
Tomas Vondra [Tue, 27 Nov 2018 23:48:51 +0000 (00:48 +0100)]
Use wildcard to match parens after CREATE STATISTICS
CREATE STATISTICS completion was checking manually for the start and end
of the parenthesised list of types. That works, but we now have a better
way to do that as commit 121213d9d taught word_matches() to allow '*' in
the middle of an alternative. But it only applied that to tab completion
for EXPLAIN, ANALYZE and VACUUM. Use it for CREATE STATISTICS too.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://www.postgresql.org/message-id/flat/d8jwooziy1s.fsf%40dalvik.ping.uio.no
Thomas Munro [Tue, 27 Nov 2018 22:42:32 +0000 (11:42 +1300)]
Don't count zero-filled buffers as 'read' in EXPLAIN.
If you extend a relation, it should count as a block written, not
read (we write a zero-filled block). If you ask for a zero-filled
buffer, it shouldn't be counted as read or written.
Later we might consider counting zero-filled buffers with a separate
counter, if they become more common due to future work.
Author: Thomas Munro Reviewed-by: Haribabu Kommi, Kyotaro Horiguchi, David Rowley
Discussion: https://postgr.es/m/CAEepm%3D3JytB3KPpvSwXzkY%2Bdwc5zC8P8Lk7Nedkoci81_0E9rA%40mail.gmail.com
Andres Freund [Tue, 27 Nov 2018 20:16:55 +0000 (12:16 -0800)]
Ensure consistent sort order of large objects in pg_dump.
The primary purpose of this commit is to ensure pg_upgrade tests yield
comparable dumps pre/post upgrade, which got broken by 12a53c732 / 578b229718, as the order in pg_largeobject_metadata is likely to
differ pre/post upgrade.
It also seems like a generally good idea to make sure such dumps are
comparable, outside of pg_upgrade tests.
LO metadata already was already dumped in an ordered manner as the
metadata is dumped in a well defined order via
sortDumpableObjectsByTypeName() and sortDumpableObjects(). But large
object data is currently not tracked via that mechanism.
As Tom points out it seems possible that at some point dumpBlobs() was
assumed to dump out objects in a well defined order, due to the use of
DISTINCT, which at that time only was done using sorting.
Per complaint from Andrew Dunstan and discussion with him and Tom
Lane.
Author: Andres Freund
Discussion: https://postgr.es/m/2735.1543333649@sss.pgh.pa.us
Andres Freund [Tue, 27 Nov 2018 18:07:03 +0000 (10:07 -0800)]
Fix jit compilation bug on wide tables.
The function generated to perform JIT compiled tuple deforming failed
when HeapTupleHeader's t_hoff was bigger than a signed int8. I'd
failed to realize that LLVM's getelementptr would treat an int8 index
argument as signed, rather than unsigned. That means that a hoff
larger than 127 would result in a negative offset being applied. Fix
that by widening the index to 32bit.
Add a testcase with a wide table. Don't drop it, as it seems useful to
verify other tools deal properly with wide tables.
Thanks to Justin Pryzby for both reporting a bug and then reducing it
to a reproducible testcase!
Reported-By: Justin Pryzby
Author: Andres Freund
Discussion: https://postgr.es/m/20181115223959.GB10913@telsasoft.com
Backpatch: 11, just as jit compilation was
Peter Eisentraut [Tue, 27 Nov 2018 14:16:14 +0000 (15:16 +0100)]
Update ssl test certificates and keys
Debian testing and newer now require that RSA and DHE keys are at
least 2048 bit long and no longer allow SHA-1 for signatures in
certificates. This is currently causing the ssl tests to fail there
because the test certificates and keys have been created in violation
of those conditions.
Update the parameters to create the test files and create a new set of
test files.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp> Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20180917131340.GE31460%40paquier.xyz
Unfortunately ac218aa4f6 missed the fact that a reference to
'pg_catalog.regnamespace'::regclass wouldn't work before that type is
known. Fix that, by replacing the regtype usage with a join to
pg_type.
Reported-By: Tom Lane
Author: Andres Freund
Discussion: https://postgr.es/m/8863.1543297423@sss.pgh.pa.us
Backpatch: 9.5-, like ac218aa4f6
Andres Freund [Tue, 27 Nov 2018 01:00:43 +0000 (17:00 -0800)]
Update pg_upgrade test for reg* to include regrole and regnamespace.
When the regrole (0c90f6769) and regnamespace (cb9fa802b) types were
added in 9.5, pg_upgrade's check for reg* types wasn't updated. While
regrole currently is safe, regnamespace is not.
It seems unlikely that anybody uses regnamespace inside catalog tables
across a pg_upgrade, but the tests should be correct nevertheless.
While at it, reorder the types checked in the query to be
alphabetical. Otherwise it's annoying to compare existing and tested
for types.
Author: Andres Freund
Discussion: https://postgr.es/m/037e152a-cb25-3bcb-4f35-bdc9988f8204@2ndQuadrant.com
Backpatch: 9.5-, as regrole/regnamespace
Andres Freund [Mon, 26 Nov 2018 22:20:36 +0000 (14:20 -0800)]
Fix pg_upgrade for oid removal.
pg_upgrade previously copied pg_largeobject_metadata over from the old
cluster. That doesn't work, because the table has oids before 578b229718. I missed that.
As most pieces of metadata for large objects already were dumped as
DDL (except for comments overwritten by pg_upgrade, due to the copy of
pg_largeobject_metadata) it seems reasonable to just also dump grants
for large objects. If we ever consider this a relevant performance
problem, we'd need to fix the rest of the already emitted DDL
too.
There's still an open discussion about whether we'll want to force a
specific ordering for the dumped objects, as currently
pg_largeobjects_metadata potentially has a different ordering
before/after pg_upgrade, which can make automated testing a bit
harder.
Reported-By: Andrew Dunstan
Author: Andres Freund
Discussion: https://postgr.es/m/91a8a980-41bc-412b-fba2-2ba71a141c2b@2ndQuadrant.com
Tom Lane [Mon, 26 Nov 2018 22:32:51 +0000 (17:32 -0500)]
Fix translation of special characters in psql's LaTeX output modes.
latex_escaped_print() mistranslated \ and failed to provide any translation
for # ^ and ~, all of which would typically lead to LaTeX document syntax
errors. In addition it didn't translate < > and |, which would typically
render as unexpected characters.
To some extent this represents shortcomings in ancient versions of LaTeX,
which if memory serves had no easy way to render these control characters
as ASCII text. But that's been fixed for, um, decades. In any case there
is no value in emitting guaranteed-to-fail output for these characters.
Noted while fooling with test cases added by commit 9a98984f4. Back-patch
the code change to all supported versions.
Tom Lane [Mon, 26 Nov 2018 20:30:11 +0000 (15:30 -0500)]
Avoid locale-dependent output in numericlocale check.
I'd forgotten that in the buildfarm, parts of the regression tests
may run with psql exposed to a non-default LC_NUMERIC setting.
Hence we can't assume that C locale prevails, nor is there any
accessible way to force the setting for this single test step.
Lobotomize the test case added by commit 9a98984f4 so that it covers as
much as we can of print.c without having any locale-varying output.
Tom Lane [Mon, 26 Nov 2018 20:18:55 +0000 (15:18 -0500)]
Add CSV table output mode in psql.
"\pset format csv", or --csv, selects comma-separated values table format.
This is compliant with RFC 4180, except that we aren't too picky about
whether the record separator is LF or CRLF; also, the user may choose a
field separator other than comma.
This output format is directly compatible with the server's COPY CSV
format, and will also be useful as input to other programs. It's
considerably safer for that purpose than the old recommendation to
use "unaligned" format, since the latter couldn't handle data
containing the field separator character.
Daniel Vérité, reviewed by Fabien Coelho and David Fetter, some
tweaking by me
Tom Lane [Mon, 26 Nov 2018 17:41:42 +0000 (12:41 -0500)]
Improve regression test coverage for psql output formats.
As penance for the "\pset format latex" silliness, add some regression
test coverage for the off-the-beaten-path output formats, which formerly
had exactly no coverage, except for some poorly-thought-out (unreadable,
repetitive, and incomplete) tests for asciidoc format.
I make no claims for the behavior exposed here actually being correct;
these test cases are just designed to ensure full code coverage in
fe_utils/print.c. This brings the line coverage for that file up
from ~60% to ~93%.
Tom Lane [Mon, 26 Nov 2018 17:31:20 +0000 (12:31 -0500)]
Fix breakage of "\pset format latex".
Commit eaf746a5b unintentionally made psql's "latex" output format
inaccessible, since not only "latex" but all abbreviations of it
were considered ambiguous against "latex-longtable". Let's go
back to the longstanding behavior that all shortened versions
mean "latex", and you have to write at least "latex-" to get
"latex-longtable". This leaves the only difference from pre-v12
behavior being that "\pset format a" is considered ambiguous.
The fact that the regression tests didn't expose this is pretty bad,
but fixing it is material for a separate commit.
Alvaro Herrera [Mon, 26 Nov 2018 15:27:07 +0000 (12:27 -0300)]
Clarify that cross-row constraints are unsupported
Maybe we'll implement them later, or maybe not, but let's make the statu
quo clear for now.
Author: Lætitia Avrot, Patrick Francelle
Reviewers: too many to list
Discussion: https://postgr.es/m/CAB_COdhUuzNFOJfc7SNNso5rOuVA3ui93KMVunEM8Yih+K5A6A@mail.gmail.com
Michael Paquier [Mon, 26 Nov 2018 02:12:11 +0000 (11:12 +0900)]
Revert all new recent changes to add PGXS options for TAP and isolation
A set of failures in buildfarm machines are proving that this is not
quite ready yet because of another set of issues:
- MSVC scripts assume that REGRESS_OPTS can only use top_builddir. Some
test suites actually finish by using top_srcdir, like pg_stat_statements
which cause the regression tests to never run.
- Trying to enforce top_builddir does not work either when using VPATH
as this is not recognized properly.
- TAP tests of bloom are unstable on various platforms, causing various
failures.
Michael Paquier [Mon, 26 Nov 2018 01:49:49 +0000 (10:49 +0900)]
Fix regression test handling of test_decoding with MSVC
The set of scripts in charge of running the regression tests for MSVC
run currently under the assumption that only $(top_builddir) can used in
option values defined in REGRESS_OPTS, and those options need to have a
specific format as well to be correctly parsed, so fix the Makefile
values so as those are correctly set.
Per complains from buildfarm member dory and whelk, with some extra
testing done on my side with MSVC to check this patch.
Michael Paquier [Mon, 26 Nov 2018 00:42:21 +0000 (09:42 +0900)]
Disable temporarily TAP tests for contrib/bloom/
The recent commit 03faa4a8 has enabled those tests, however several
buildfarm members are complaining about their stability on Windows and
macOS. This will keep the buildfarm green, while investigating the
root problem.
Michael Paquier [Sun, 25 Nov 2018 23:39:19 +0000 (08:39 +0900)]
Add PGXS options to control TAP and isolation tests
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile targets have been accumulated across the
tree to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. This also fixes an issue with
contrib/bloom/, which had a custom target to trigger its TAP tests of
its own not part of the main check runs.
Author: Michael Paquier Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
Peter Eisentraut [Sun, 25 Nov 2018 15:31:16 +0000 (16:31 +0100)]
Integrate recovery.conf into postgresql.conf
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Thomas Munro [Sun, 25 Nov 2018 03:21:41 +0000 (16:21 +1300)]
Fix assertion failure for SSL connections.
Commit cfdf4dc4 added an assertion that every WaitLatch() or similar
handles postmaster death. One place did not, but was missed in
review and testing due to the need for an SSL connection. Fix, by
asking for WL_EXIT_ON_PM_DEATH.
Reported-by: Christoph Berg
Discussion: https://postgr.es/m/20181124143845.GA15039%40msg.df7cb.de
Andrew Gierth [Sat, 24 Nov 2018 09:59:49 +0000 (09:59 +0000)]
Fix hstore hash function for empty hstores upgraded from 8.4.
Hstore data generated on pg 8.4 and pg_upgraded to current versions
remains in its original on-disk format unless modified. The same goes
for values generated by the addon hstore-new module on pre-9.0
versions. (The hstoreUpgrade function converts old values on the fly
when read in, but the on-disk value is not modified by this.)
Since old-format empty hstores (and hstore-new hstores) have
representations compatible with the new format, hstoreUpgrade thought
it could get away without modifying such values; but this breaks
hstore_hash (and the new hstore_hash_extended) which assumes
bit-perfect matching between semantically identical hstore values.
Only one bit actually differs (the "new version" flag in the count
field) but that of course is enough to break the hash.
Fix by making hstoreUpgrade unconditionally convert all old values to
new format.
Backpatch all the way, even though this changes a hash value in some
cases, because in those cases the hash value is already failing - for
example, a hash join between old- and new-format empty hstores will be
failing to match, or a hash index on an hstore column containing an
old-format empty value will be failing to find the value since it will
be searching for a hash derived from a new-format datum. (There are no
known field reports of this happening, probably because hashing of
hstores has only been useful in limited circumstances and there
probably isn't much upgraded data being used this way.)
Per concerns arising from discussion of commit eb6f29141be. Original
bug is my fault.
Andrew Gierth [Fri, 23 Nov 2018 23:56:39 +0000 (23:56 +0000)]
Avoid crashes in contrib/intarray gist__int_ops (bug #15518)
1. Integer overflow in internal_size could result in memory corruption
in decompression since a zero-length array would be allocated and then
written to. This leads to crashes or corruption when traversing an
index which has been populated with sufficiently sparse values. Fix by
using int64 for computations and checking for overflow.
2. Integer overflow in g_int_compress could cause pessimal merge
choices, resulting in unnecessarily large ranges (which would in turn
trigger issue 1 above). Fix by using int64 again.
3. Even without overflow, array sizes could become large enough to
cause unexplained memory allocation errors. Fix by capping the sizes
to a safe limit and report actual errors pointing at gist__intbig_ops
as needed.
4. Large inputs to the compression function always consist of large
runs of consecutive integers, and the compression loop was processing
these one at a time in an O(N^2) manner with a lot of overhead. The
expected runtime of this function could easily exceed 6 months for a
single call as a result. Fix by performing a linear-time first pass,
which reduces the worst case to something on the order of seconds.
Backpatch all the way, since this has been wrong forever.
Per bug #15518 from report from irc user "dymk", analysis and patch by
me.
Tom Lane [Sat, 24 Nov 2018 04:49:25 +0000 (23:49 -0500)]
Adjust new test case for more portability.
Early returns from the buildfarm say that most critters are good with
commit cbdb8b4c0, but gaur gives unexpected results with the test case
involving a float8 that's one-ULP-less-than-2^63. It appears that that
platform's version of rint() rounds that value up to 2^63 instead of
leaving it be. This is possibly a bug, and it's also possible that no
other platform anybody is using anywhere behaves likewise. Still, the
point of the test is not to insist that everybody's rint() behaves exactly
the same. Let's use two-ULPs-less-than-2^63 instead, which I've tested
to act the same on gaur as on more modern hardware.
(This is, more or less, exactly the portability issue I'd feared might
arise...)
Tom Lane [Sat, 24 Nov 2018 01:57:11 +0000 (20:57 -0500)]
Fix float-to-integer coercions to handle edge cases correctly.
ftoi4 and its sibling coercion functions did their overflow checks in
a way that looked superficially plausible, but actually depended on an
assumption that the MIN and MAX comparison constants can be represented
exactly in the float4 or float8 domain. That fails in ftoi4, ftoi8,
and dtoi8, resulting in a possibility that values near the MAX limit will
be wrongly converted (to negative values) when they need to be rejected.
Also, because we compared before rounding off the fractional part,
the other three functions threw errors for values that really ought
to get rounded to the min or max integer value.
Fix by doing rint() first (requiring an assumption that it handles
NaN and Inf correctly; but dtoi8 and ftoi8 were assuming that already),
and by comparing to values that should coerce to float exactly, namely
INTxx_MIN and -INTxx_MIN. Also remove some random cosmetic discrepancies
between these six functions.
Per bug #15519 from Victor Petrovykh. This should get back-patched,
but first let's see what the buildfarm thinks of it --- I'm not too
sure about portability of some of the regression test cases.
Patch by me; thanks to Andrew Gierth for analysis and discussion.
Tom Lane [Fri, 23 Nov 2018 17:48:49 +0000 (12:48 -0500)]
Clamp semijoin selectivity to be not more than inner-join selectivity.
We should never estimate the output of a semijoin to be more rows than
we estimate for an inner join with the same input rels and join condition;
it's obviously impossible for that to happen. However, given the
relatively poor quality of our semijoin selectivity estimates ---
particularly, but not only, in cases where we punt and return a default
estimate --- we did often deliver such estimates. To improve matters,
calculate both estimates inside eqjoinsel() and take the smaller one.
The bulk of this patch is just mechanical refactoring to avoid repetitive
information lookup when we call both eqjoinsel_semi and eqjoinsel_inner.
The actual new behavior is just
which looks a bit odd but is correct because of our different definitions
for inner and semi join selectivity.
There is one ensuing plan change in the regression tests, but it looks
reasonable enough (and checking the actual row counts shows that the
estimate moved closer to reality, not further away).
Per bug #15160 from Alexey Ermakov. Although this is arguably a bug fix,
I won't risk destabilizing plan choices in stable branches by
back-patching.