Jan Wen Voung [Fri, 5 Dec 2014 20:55:53 +0000 (20:55 +0000)]
Use 32-bit ebp for NaCl64 in a limited case: llvm.frameaddress.
Summary:
Follow up to [x32] "Use ebp/esp as frame and stack pointer":
http://reviews.llvm.org/D4617
In that earlier patch, NaCl64 was made to always use rbp.
That's needed for most cases because rbp should hold a full
64-bit address within the NaCl sandbox so that load/stores
off of rbp don't require sandbox adjustment (zeroing the top
32-bits, then filling those by adding r15).
However, llvm.frameaddress returns a pointer and pointers
are 32-bit for NaCl64. In this case, use ebp instead, which
will make the register copy type check. A similar mechanism
may be needed for llvm.eh.return, but is not added in this change.
[X86] Improved lowering of packed vector shifts to vpsllq/vpsrlq.
SSE2/AVX non-constant packed shift instructions only use the lower 64-bit of
the shift count.
This patch teaches function 'getTargetVShiftNode' how to deal with shifts
where the shift count node is of type MVT::i64.
Before this patch, function 'getTargetVShiftNode' only knew how to deal with
shift count nodes of type MVT::i32. This forced the backend to wrongly
truncate the shift count to MVT::i32, and then zero-extend it back to MVT::i64.
When a loop gets bundled up, its outgoing edges are quite large, and can
just barely overflow 64-bits. If one successor has multiple incoming
edges -- and that successor is getting all the incoming mass --
combining just its edges can overflow. Handle that by saturating rather
than asserting.
Benjamin Kramer [Fri, 5 Dec 2014 17:03:01 +0000 (17:03 +0000)]
LLVMContext: Store APInt/APFloat directly into the ConstantInt/FP DenseMaps.
Required some APInt massaging to get proper empty/tombstone values. Apart
from making the code a bit simpler this also reduces the bucket size of
the ConstantInt map from 32 to 24 bytes.
No functional changes. Got myself bitten in r223113 when adding support for
modified immediate syntax (regressions reported by joerg@britannica.bec.de,
fixes in r223366 and r223381). Our assembler tests did not cover serveral
different syntax variants. This patch expands the test coverage to check for
the following cases:
1. Modified immediate operands may be expressed with expressions, as in #(4 * 2)
instead of #8.
2. Modified immediate operands may be _optionally_ prefixed by a '#' symbol or a
'$' symbol.
3. Certain instructions (e.g. ADD) support single input register variants;
[ADD r0, #mod_imm] is same as [ADD r0, r0, #mod_imm].
4. Certain instructions have aliases which convert plain immediates to modified
immediates. For an example, [ADD r0, -10] is not valid because -10 (in two's
complement) cannot be encoded as a modified immediate, but ARMInstrInfo.td
defines an alias which can transform this into a [SUB r0, 10].
[X86] Avoid introducing extra shuffles when lowering packed vector shifts.
When lowering a vector shift node, the backend checks if the shift count is a
shuffle with a splat mask. If so, then it introduces an extra dag node to
extract the splat value from the shuffle. The splat value is then used
to generate a shift count of a target specific shift.
However, if we know that the shift count is a splat shuffle, we can use the
splat index 'I' to extract the I-th element from the first shuffle operand.
The advantage is that the splat shuffle may become dead since we no longer
use it.
Example:
;;
define <4 x i32> @example(<4 x i32> %a, <4 x i32> %b) {
%c = shufflevector <4 x i32> %b, <4 x i32> undef, <4 x i32> zeroinitializer
%shl = shl <4 x i32> %a, %c
ret <4 x i32> %shl
}
;;
Before this patch, llc generated the following code (-mattr=+avx):
vpshufd $0, %xmm1, %xmm1 # xmm1 = xmm1[0,0,0,0]
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
With this patch, the redundant splat operation is removed from the code.
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
Charlie Turner [Fri, 5 Dec 2014 08:22:47 +0000 (08:22 +0000)]
Add missing FP build attribute tests.
The test file test/CodeGen/ARM/build-attributes.ll was missing several
floating-point build attribute tests. The intention of this commit is that for
each CPU / architecture currently tested, there are now tests that make sure
the following attributes are sufficiently checked,
Also in this commit, the -unsafe-fp-math flag has been augmented with the full
suite of flags Clang sends to LLVM when you pass -ffast-math to Clang. That is,
`-unsafe-fp-math' has been changed to `-enable-unsafe-fp-math -disable-fp-elim
-enable-no-infs-fp-math -enable-no-nans-fp-math -fp-contract=fast'
Hal Finkel [Fri, 5 Dec 2014 01:57:22 +0000 (01:57 +0000)]
Consider subregs when calling MI::registerDefIsDead for phys deps
The scheduling dependency graph is built bottom-up within each scheduling
region, and ScheduleDAGInstrs::addPhysRegDeps is called to add output/anti
dependencies, based on physical registers, to the SUs for instructions
based on those that come before them.
In the test case, we start before post-RA scheduling with a block that looks
like this:
where it is relevant that %CC is an alias to %CR0, and that %CR0GT is a
subregister of %CR0. However, for post-RA scheduling, no dependency was added
to prevent the INLINEASM from being scheduled in between the ANDIo8 and the
ISEL (which communicate via the %CR0GT register).
In ScheduleDAGInstrs::addPhysRegDeps, when called for the %CC operand, we'd
iterate over all of its aliases (which include %CC itself and also %CR0), and
look for previously-encountered defs of those registers. We'd find the ANDIo8,
but decide not to add a dependency between the INLINEASM and the ANDIo8 because
both the INLINEASM's def of %CC is dead, and also the ANDIo8 def of %CR0 is
dead. This ignores, however, that ANDIo8 has a non-dead def of %CR0GT, a
subregister of %CR0, and thus a dependency still must exist.
To fix this problem, when calling registerDefIsDead on the SU with the def, we
also check all subregisters for possible non-dead defs, and add the dependency
if any are found.
Adrian Prantl [Fri, 5 Dec 2014 01:02:46 +0000 (01:02 +0000)]
Cleanup: Calls to getDwarfRegNum() may actually fail, if there is
no DWARF register number mapping, or if the register was a virtual
register that was never materialized. Previously, we would just emit a
bogus location, after this patch we don't emit a location at all by
doing an early exit.
After my bugfix in r223401 today, this doesn't actually happen on any
target that I tested this with, but it's still preferable to make the
possibility of a failure explicit.
Paul Robinson [Fri, 5 Dec 2014 00:50:15 +0000 (00:50 +0000)]
Make GetSVN.cmake do its VCS queries with native CMake code.
This lets the queries work on Windows as well as Linux.
This does mean make and cmake aren't using the same scripts to do the
queries (again), but at least GetSVN.cmake understands git and git-svn
as well as svn now.
Kevin Enderby [Thu, 4 Dec 2014 23:56:27 +0000 (23:56 +0000)]
Re-add support to llvm-objdump for Mach-O universal files and archives with -macho
with fixes. Includes the move of tests for llvm-objdump for universal files to an X86
directory. And the fix where it was failing on linux Rafael tracked down with asan.
I had both Jim Grosbach and Adam Hemet look over the second fix since I could not
set up asan to reproduce with the old version but not with the fix.
Ahmed Bougacha [Thu, 4 Dec 2014 23:52:15 +0000 (23:52 +0000)]
[X86] Delete dead code in fcopysign lowering. NFC.
r32900 introduced custom lowering for fcopysign, with two checks to
change the magnitude value's type if it's larger/smaller than the sign
value's type. r32932 replaced that code for the smaller case.
r43205 did the same for the larger case, but left the old code, now dead.
Adrian Prantl [Thu, 4 Dec 2014 22:29:04 +0000 (22:29 +0000)]
Debug info: If the RegisterCoalescer::reMaterializeTrivialDef() is
eliminating all uses of a vreg, update any DBG_VALUE describing that vreg
to point to the rematerialized register instead.
Fix yet another unseen regression caused by r223113
r223113 added support for ARM modified immediate assembly syntax. Which
assumes all immediate operands are prefixed with a '#'. This assumption
is wrong as per the ARMARM - which recommends that all '#' characters be
treated optional. The current patch fixes this regression and adds a test
case. A follow-up patch will expand the test coverage to other instructions.
So there are a couple of issues with indirect calls on thumbv4t. First, the most
'obvious' instruction, 'blx' isn't available until v5t. And secondly, the
next-most-obvious sequence: 'mov lr, pc; bx rN' doesn't DTRT in thumb code
because the saved off pc has its thumb bit cleared, so when the callee returns
we end up in ARM mode.... yuck.
The solution is to 'bl' to a nearby landing pad with a 'bx rN' in it.
We could cut down on code size by sharing the landing pads between call sites
that are close enough, but for the moment let's do correctness first and look at
performance later.
Hal Finkel [Thu, 4 Dec 2014 17:45:19 +0000 (17:45 +0000)]
Revert "r223364 - Revert r223347 which has caused crashes on bootstrap bots."
Reapply r223347, with a fix to not crash on uninserted instructions (or more
precisely, instructions in uninserted blocks). bugpoint was able to reduce the
test case somewhat, but it is still somewhat large (and relies on setting
things up to be simplified during inlining), so I've not included it here.
Nevertheless, it is clear what is going on and why.
Original commit message:
Restrict somewhat the memory-allocation pointer cmp opt from r223093
Based on review comments from Richard Smith, restrict this optimization from
applying to globals that might resolve lazily to other dynamically-loaded
modules, and also from dynamic allocas (which might be transformed into malloc
calls). In short, take extra care that the compared-to pointer is really
simultaneously live with the memory allocation.
Philip Reames [Thu, 4 Dec 2014 17:27:58 +0000 (17:27 +0000)]
Fix a typo: use of cast where dyn_cast was intended
This bug has the effect of converting a test of isGCRelocate(InvokeInst*) from a false return to a crash.
This may be the root cause of the crash Joerg reported against r223137, but I'm still waiting for a clean build of clang to complete to be able to confirm. Once I've confirmed the issue, I'll submit a test case separately.
Daniel Sanders [Thu, 4 Dec 2014 17:15:35 +0000 (17:15 +0000)]
test-release.sh: Add a way to specify --build to configure
Summary:
I currently have to specify --build=mips-linux-gnu or --build=mipsel-linux-gnu
to configure in order to successfully recurse a 32-bit build of the compiler on
my mips64-linux-gnu and mips64el-linux-gnu targets. This is a bug and will be
fixed but in the meantime it will be useful to have a way to work around this.
r223113 added support for ARM modified immediate assembly syntax. That patch
has broken support for immediate expressions, as in:
add r0, #(4 * 4)
It wasn't caught because we don't have any tests for this feature. This patch
fixes this regression and adds test cases.
Revert "[Thumb/Thumb2] Added restrictions on PC, LR, SP in the register list for PUSH/POP/LDM/STM. <Differential Revision: http://reviews.llvm.org/D6090>"
This reverts commit r223356.
It was failing check-all (MC/ARM/thumb.s in particular).
[X86] Improve a dag-combine that handles a vector extract -> zext sequence.
The current DAG combine turns a sequence of extracts from <4 x i32> followed by zexts into a store followed by scalar loads.
According to measurements by Martin Krastev (see PR 21269) for x86-64, a sequence of an extract, movs and shifts gives better performance. However, for 32-bit x86, the previous sequence still seems better.
Replaced some logic that checked if a build_vector node is doing a splat of a
non-undef value with a call to method BuildVectorSDNode::getSplatValue().
No functional change intended.
Daniel Sanders [Thu, 4 Dec 2014 11:00:09 +0000 (11:00 +0000)]
test-release.sh: Correct the logged configure command to match the one actually issued.
--disable-timestamps was added to the configure command way back in r142647 but
the command that echos this command to the log was not updated at the time.
Masked Load / Store Intrinsics - the CodeGen part.
I'm recommiting the codegen part of the patch.
The vectorizer part will be send to review again.
Masked Vector Load and Store Intrinsics.
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
Hal Finkel [Thu, 4 Dec 2014 09:22:28 +0000 (09:22 +0000)]
Restrict somewhat the memory-allocation pointer cmp opt from r223093
Based on review comments from Richard Smith, restrict this optimization from
applying to globals that might resolve lazily to other dynamically-loaded
modules, and also from dynamic allocas (which might be transformed into malloc
calls). In short, take extra care that the compared-to pointer is really
simultaneously live with the memory allocation.
Michael Liao [Thu, 4 Dec 2014 00:56:38 +0000 (00:56 +0000)]
[X86] Restore X86 base pointer after call to llvm.eh.sjlj.setjmp
Commit on
- This patch fixes the bug described in
http://lists.cs.uiuc.edu/pipermail/llvmdev/2013-May/062343.html
The fix allocates an extra slot just below the GPRs and stores the base pointer
there. This is done only for functions containing llvm.eh.sjlj.setjmp that also
need a base pointer. Because code containing llvm.eh.sjlj.setjmp saves all of
the callee-save GPRs in the prologue, the offset to the extra slot can be
computed before prologue generation runs.
Impact at run-time on affected functions is::
- One extra store in the prologue, The store saves the base pointer.
- One extra load after a llvm.eh.sjlj.setjmp. The load restores the base pointer.
Because the extra slot is just above a gap between frame-pointer-relative and
base-pointer-relative chunks of memory, there is no impact on other offset
calculations other than ensuring there is room for the extra slot.
Hal Finkel [Thu, 4 Dec 2014 00:46:20 +0000 (00:46 +0000)]
[PowerPC] 'cc' should be an alias only to 'cr0'
We had mistakenly believed that GCC's 'cc' referred to the entire
condition-code register (cr0 through cr7) -- and implemented this in r205630 to
fix PR19326, but 'cc' is actually an alias only to 'cr0'. This is causing LLVM
to clobber too much with legacy code with inline asm using the 'cc' clobber.
Matt Arsenault [Thu, 4 Dec 2014 00:06:57 +0000 (00:06 +0000)]
Allow target to specify prefix for labels
Use the MCAsmInfo instead of the DataLayout, and allow
specifying a custom prefix for labels specifically. HSAIL
requires that labels begin with @, but global symbols with &.
Philip Reames [Thu, 4 Dec 2014 00:01:48 +0000 (00:01 +0000)]
A few more checks for gc.statepoints in the Verifier
This is simply a grab bag of unrelated checks:
- A statepoint call can't be marked readonly or readnone
- We don't currently support inline asm or varadic target functions. Both could be supported, but don't currently work.
- I forgot to check that the number of call arguments actually matched the wrapped callee in my previous change. Included here.
Hal Finkel [Wed, 3 Dec 2014 23:40:13 +0000 (23:40 +0000)]
[PowerPC] Fix inline asm memory operands not to use r0
On PowerPC, inline asm memory operands might be expanded as 0($r), where $r is
a register containing the address. As a result, this register cannot be r0, and
we need to enforce this register subclass constraint to prevent miscompiling
the code (we'd get this constraint for free with the usual instruction
definitions, but that scheme has no knowledge of how we end up printing inline
asm memory operands, and so here we need to do it 'by hand'). We can accomplish
this within the current address-mode selection framework by introducing an
explicit COPY_TO_REGCLASS node.
Prior to this commit, physical registers defined implicitly were considered free
right after their definition, i.e.. like dead definitions. Therefore, their uses
had to immediately follow their definitions, otherwise the related register may
be reused to allocate a virtual register.
This commit fixes this assumption by keeping implicit definitions alive until
they are actually used. The downside is that if the implicit definition was dead
(and not marked at such), we block an otherwise available register. This is
however conservatively correct and makes the fast register allocator much more
robust in particular regarding the scheduling of the instructions.
projects / llvm / log