Sylvestre Ledru [Fri, 1 Nov 2013 00:26:01 +0000 (00:26 +0000)]
OCaml bindings: formatting
This commit only changes comments and documentation in OCaml bindings. The official name of the language is OCaml, and the usage is now consistent.
Kevin Enderby [Fri, 1 Nov 2013 00:00:07 +0000 (00:00 +0000)]
Add to the disassembler C API output reference types for
Objective-C data structures.
This is allows tools such as darwin's otool(1) that uses the
LLVM disassembler take a pointer value being loaded by
an instruction and add a comment to what it is being referenced
to make following disassembly of Objective-C programs
more readable.
For example disassembling the Mac OS X TextEdit app one
will see comments like the following:
These diffs also include putting quotes around C strings
in literal pools and uses "symbol address" in the comment
when adding a symbol name to the comment to tell these
types of references apart:
leaq 0x4f(%rip), %rax ## literal pool for: "Hello world"
movq 0x1c3ea(%rip), %rax ## literal pool symbol address: ___stack_chk_guard
Of course the easy changes are in the LLVM disassembler and
the hard work is up to the implementer of the SymbolLookUp()
call back.
Manman Ren [Thu, 31 Oct 2013 21:56:03 +0000 (21:56 +0000)]
Do not convert "call asm" to "invoke asm" in Inliner.
Given that backend does not handle "invoke asm" correctly ("invoke asm" will be
handled by SelectionDAGBuilder::visitInlineAsm, which does not have the right
setup for LPadToCallSiteMap) and we already made the assumption that inline asm
does not throw in InstCombiner::visitCallSite, we are going to make the same
assumption in Inliner to make sure we don't convert "call asm" to "invoke asm".
If it becomes necessary to add support for "invoke asm" later on, we will need
to modify the backend as well as remove the assumptions that inline asm does
not throw.
Rafael Espindola [Thu, 31 Oct 2013 20:51:58 +0000 (20:51 +0000)]
Use LTO_SYMBOL_SCOPE_DEFAULT_CAN_BE_HIDDEN instead of the "dso list".
There are two ways one could implement hiding of linkonce_odr symbols in LTO:
* LLVM tells the linker which symbols can be hidden if not used from native
files.
* The linker tells LLVM which symbols are not used from other object files,
but will be put in the dso symbol table if present.
GOLD's API is the second option. It was implemented almost 1:1 in llvm by
passing the list down to internalize.
LLVM already had partial support for the first option. It is also very similar
to how ld64 handles hiding these symbols when *not* doing LTO.
This patch then
* removes the APIs for the DSO list.
* marks LTO_SYMBOL_SCOPE_DEFAULT_CAN_BE_HIDDEN all linkonce_odr unnamed_addr
global values and other linkonce_odr whose address is not used.
* makes the gold plugin responsible for handling the API mismatch.
Reid Kleckner [Thu, 31 Oct 2013 19:12:36 +0000 (19:12 +0000)]
Use a larger invalid attribute bitcode number
That way the test won't start faililng when someone adds a new attribute
and wants to use the next logical enum (38) for bitcode. The new
bitcode file tries to use the number 48 as an attribute instead.
Petar Jovanovic [Thu, 31 Oct 2013 18:10:25 +0000 (18:10 +0000)]
[mips] XFAIL several MCJIT remote tests
Two of the tests are new test cases (cross-module-a.ll, multi-module-a.ll)
not yet supported on MIPS, while XFAIL for the other two tests was
accidentally removed in r193570 and this change reverts those lines.
Manman Ren [Thu, 31 Oct 2013 17:54:35 +0000 (17:54 +0000)]
Debug Info: remove duplication of DIEs when a DIE can be shared across CUs.
We add a map in DwarfDebug to map MDNodes that are shareable across CUs to the
corresponding DIEs: MDTypeNodeToDieMap. These DIEs can be shared across CUs,
that is why we keep the maps in DwarfDebug instead of CompileUnit.
We make the assumption that if a DIE is not added to an owner yet, we assume
it belongs to the current CU. Since DIEs for the type system are added to
their owners immediately after creation, and other DIEs belong to the current
CU, the assumption should be true.
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
We also add a testing case to show ref_addr relocations for non-darwin
platforms.
[SystemZ] Automatically detect zEC12 and z196 hosts
As on other hosts, the CPU identification instruction is priveleged,
so we need to look through /proc/cpuinfo. I copied the PowerPC way of
handling "generic".
Several tests were implicitly assuming z10 and so failed on z196.
Jim Grosbach [Thu, 31 Oct 2013 00:20:48 +0000 (00:20 +0000)]
Legalize: Improve legalization of long vector extends.
When an extend more than doubles the size of the elements (e.g., a zext
from v16i8 to v16i32), the normal legalization method of splitting the
vectors will run into problems as by the time the destination vector is
legal, the source vector is illegal. The end result is the operation
often becoming scalarized, with the typical horrible performance. For
example, on x86_64, the simple input of:
define void @bar(<16 x i8> %a, <16 x i32>* %p) nounwind {
%tmp = zext <16 x i8> %a to <16 x i32>
store <16 x i32> %tmp, <16 x i32>*%p
ret void
}
So instead we can check if there are legal types that enable us to split
more cleverly when the input vector is already legal such that we don't
turn it into an illegal type. If the extend is such that it's more than
doubling the size of the input we check if
- the number of vector elements is even,
- the source type is legal,
- the type of a split source is illegal,
- the type of an extended (by doubling element size) source is legal, and
- the type of that extended source when split is legal.
If the conditions are met, instead of just splitting both the
destination and the source types, we create an extend that only goes up
one "step" (doubling the element width), and the continue legalizing the
rest of the operation normally. The result is that this operates as a
new, more effecient, termination condition for the loop of "split the
operation until the destination type is legal."
With this change, the above example now compiles to:
_bar:
vpxor %xmm1, %xmm1, %xmm1
vpunpcklbw %xmm1, %xmm0, %xmm2
vpunpckhwd %xmm1, %xmm2, %xmm3
vpunpcklwd %xmm1, %xmm2, %xmm2
vinsertf128 $1, %xmm3, %ymm2, %ymm2
vpunpckhbw %xmm1, %xmm0, %xmm0
vpunpckhwd %xmm1, %xmm0, %xmm3
vpunpcklwd %xmm1, %xmm0, %xmm0
vinsertf128 $1, %xmm3, %ymm0, %ymm0
vmovaps %ymm0, 32(%rdi)
vmovaps %ymm2, (%rdi)
vzeroupper
ret
This generalizes a custom lowering that was added a while back to the
ARM backend. That lowering is no longer necessary, and is removed. The
testcases for it, however, provide excellent ARM tests for this change
and so remain.
Rafael Espindola [Wed, 30 Oct 2013 22:37:51 +0000 (22:37 +0000)]
Add calls to doInitialization() and doFinalization() in verifyFunction()
The function verifyFunction() in lib/IR/Verifier.cpp misses some
calls. It creates a temporary FunctionPassManager that will run a
single Verifier pass. Unfortunately, FunctionPassManager is no
PassManager and does not call doInitialization() and doFinalization()
by itself. Verifier does important tasks in doInitialization() such as
collecting type information used to check DebugInfo metadata and
doFinalization() does some additional checks. Therefore these checks
were missed and debug info couldn't be verified at all, it just
crashed if the function had some.
verifyFunction() is currently not used in llvm unless -debug option is
enabled, and in unittests/IR/VerifierTest.cpp
VerifierTest had to be changed to create the function in a module from
which the type debug info can be collected.
Rafael Espindola [Wed, 30 Oct 2013 22:08:11 +0000 (22:08 +0000)]
Produce .weak_def_can_be_hidden for some linkonce_odr values
With this patch llvm produces a weak_def_can_be_hidden for linkonce_odr
if they are also unnamed_addr or don't have their address taken.
There is not a lot of documentation about .weak_def_can_be_hidden, but
from the old discussion about linkonce_odr_auto_hide and the name of
the directive this looks correct: these symbols can be hidden.
Testing this with the ld64 in Xcode 5 linking clang reduces the number of
exported symbols from 21053 to 19049.
Tom Roeder [Wed, 30 Oct 2013 18:47:25 +0000 (18:47 +0000)]
This commit adds some (but not all) of the x86-64 relocations that are not
currently supported in the ELF object writer, along with a simple test case.
Daniel Sanders [Wed, 30 Oct 2013 15:20:38 +0000 (15:20 +0000)]
[mips][msa] Added support for matching bmnz, bmnzi, bmz, and bmzi from normal IR (i.e. not intrinsics)
Also corrected the definition of the intrinsics for these instructions (the
result register is also the first operand), and added intrinsics for bsel and
bseli to clang (they already existed in the backend).
These four operations are mostly equivalent to bsel, and bseli (the difference
is which operand is tied to the result). As a result some of the tests changed
as described below.
bitwise.ll:
- bsel.v test adapted so that the mask is unknown at compile-time. This stops
it emitting bmnzi.b instead of the intended bsel.v.
- The bseli.b test now tests the right thing. Namely the case when one of the
values is an uimm8, rather than when the condition is a uimm8 (which is
covered by bmnzi.b)
compare.ll:
- bsel.v tests now (correctly) emits bmnz.v instead of bsel.v because this
is the same operation (see MSA.txt).
i8.ll
- CHECK-DAG-ized test.
- bmzi.b test now (correctly) emits equivalent bmnzi.b with swapped operands
because this is the same operation (see MSA.txt).
- bseli.b still emits bseli.b though because the immediate makes it
distinguishable from bmnzi.b.
vec.ll:
- CHECK-DAG-ized test.
- bmz.v tests now (correctly) emits bmnz.v with swapped operands (see
MSA.txt).
- bsel.v tests now (correctly) emits bmnz.v with swapped operands (see
MSA.txt).
The above program currently consumes a few GB ram. This patch brings
the memory consumption down by several orders of magnitude, and keeps
the bucket count at 64 for the above test.
Daniel Sanders [Wed, 30 Oct 2013 14:45:14 +0000 (14:45 +0000)]
[mips][msa] Added support for matching bins[lr]i.[bhwd] from normal IR (i.e. not intrinsics)
This required correcting the definition of the bins[lr]i intrinsics because
the result is also the first operand.
It also required removing the (arbitrary) check for 32-bit immediates in
MipsSEDAGToDAGISel::selectVSplat().
Currently using binsli.d with 2 bits set in the mask doesn't select binsli.d
because the constant is legalized into a ConstantPool. Similar things can
happen with binsri.d with more than 10 bits set in the mask. The resulting
code when this happens is correct but not optimal.
Daniel Sanders [Wed, 30 Oct 2013 13:51:01 +0000 (13:51 +0000)]
[mips][msa] Combine binsri-like DAG of AND and OR into equivalent VSELECT
(or (and $a, $mask), (and $b, $inverse_mask)) => (vselect $mask, $a, $b).
where $mask is a constant splat. This allows bitwise operations to make use
of bsel.
It's also a stepping stone towards matching bins[lr], and bins[lr]i from
normal IR.
Two sets of similar tests have been added in this commit. The bsel_* functions
test the case where binsri cannot be used. The binsr_*_i functions will
start to use the binsri instruction in the next commit.
Daniel Sanders [Wed, 30 Oct 2013 13:07:44 +0000 (13:07 +0000)]
[mips][msa] Added support for matching splat.[bhw] from normal IR (i.e. not intrinsics)
splat.d is implemented but this subtest is currently disabled. This is because
it is difficult to match the appropriate IR on MIPS32. There is a patch under
review that should help with this so I hope to enable the subtest soon.
Juergen Ributzka [Wed, 30 Oct 2013 05:48:18 +0000 (05:48 +0000)]
SelectionDAG: Teach the legalizer to split SETCC if VSELECT needs splitting too.
The Type Legalizer recognizes that VSELECT needs to be split, because the type
is to wide for the given target. The same does not always apply to SETCC,
because less space is required to encode the result of a comparison. As a result
VSELECT is split and SETCC is unrolled into scalar comparisons.
This commit fixes the issue by checking for VSELECT-SETCC patterns in the DAG
Combiner. If a matching pattern is found, then the result mask of SETCC is
promoted to the expected vector mask type for the given target. This mask has
usually the same size as the VSELECT return type (except for Intel KNL). Now the
type legalizer will split both VSELECT and SETCC.
This allows the following X86 DAG Combine code to sucessfully detect the MIN/MAX
pattern. This fixes PR16695, PR17002, and <rdar://problem/14594431>.
Manman Ren [Tue, 29 Oct 2013 22:57:10 +0000 (22:57 +0000)]
Debug Info: support for DW_FORM_ref_addr.
To support ref_addr, we calculate the section offset of a DIE (i.e. offset
of a DIE from beginning of the debug info section). The Offset field in DIE
is currently CU-relative. To calculate the section offset, we add a
DebugInfoOffset field in CompileUnit to store the offset of a CU from beginning
of the debug info section. We set the value in DwarfUnits::computeSizeAndOffset
for each CompileUnit.
A helper function DIE::getCompileUnit is added to return the CU DIE that
the input DIE belongs to. We also add a map CUDieMap in DwarfDebug to help
finding the CU for a given CU DIE.
For a cross-referenced DIE, we first find the CU DIE it belongs to with
getCompileUnit, then we use CUDieMap to get the corresponding CU for the CU DIE.
Adding the section offset of the CU with the CU-relative offset of a DIE gives
us the seciton offset of the DIE.
We correctly emit ref_addr with relocation using EmitLabelPlusOffset when
doesDwarfUseRelocationsAcrossSections is true.
This commit handles the emission of DW_FORM_ref_addr when we have an attribute
with FORM_ref_addr. A follow-on patch will start using ref_addr when adding a
DIEEntry. This commit will be tested and verified in the follow-on patch.
Manman Ren [Tue, 29 Oct 2013 22:49:29 +0000 (22:49 +0000)]
Debug Info: instead of calling addToContextOwner which constructs the context
after the DIE creation, we construct the context first.
Ensure that we create the context before we create a type so that we can add
the newly created type to the parent. Remove last use of addToContextOwner
now that it's not needed.
We use createAndAddDIE to wrap around "new DIE(". Now all shareable DIEs
should be added to their parents right after the creation.
Manman Ren [Tue, 29 Oct 2013 22:27:32 +0000 (22:27 +0000)]
Struct byval cleanup: add helper functions to reduce code duplication.
Helper functions are added:
emitPostLd: emit a post-increment load operation with given size.
emitPostSt: emit a post-increment store operation with given size.
Josh Magee [Tue, 29 Oct 2013 21:16:16 +0000 (21:16 +0000)]
[stackprotector] Update the StackProtector pass to perform datalayout analysis.
This modifies the pass to classify every SSP-triggering AllocaInst according to
an SSPLayoutKind (LargeArray, SmallArray, AddrOf). This analysis is collected
by the pass and made available for use, but no other pass uses it yet.
The next patch will make use of this analysis in PEI and StackSlot
passes. The end goal is to support ssp-strong stack layout rules.
Matt Arsenault [Tue, 29 Oct 2013 20:59:29 +0000 (20:59 +0000)]
Workaround MSVC 32-bit miscompile of getCondCodeAction.
Use 32-bit types for the array instead of 64. This should
generally be better anyway.
In optimized + assert builds, I saw a failure when a
cond code / type combination that is never set was loading
a non-zero value and hitting the != Promote assert.
It turns out when loading the 64-bit value to do the shift,
the assembly loads the 2 32-bit halves from non-consecutive
addresses. The address the second half of the loaded uint64_t
doesn't include the offset of the array in the struct. Instead
of being offset + 4, it's just + 4.
I'm not entirely sure why this wasn't observed before.
setCondCodeAction isn't heavily used by the in-tree targets,
and not with the higher valued vector SimpleValueTypes. Only
PPC is using one of the > 32 valued types, and that is probably
never used by anyone on a 32-bit MSVC compiled host.
I ran into this when upgrading LLVM versions, so I guess the
value loaded from the nonsense address happened to work out
before.
No test since I'm not really sure if / how it can be reproduced
with the current in tree targets, and it's not supposed to change
anything.
Manman Ren [Tue, 29 Oct 2013 17:27:14 +0000 (17:27 +0000)]
Debug Info: clean up testing case.
Add a tag before the name attribute for readability. Use CHECK-NEXT
instead of CHECK-NOT followed by a CHECK. Add new lines to separate checking
of different DIEs.
projects / llvm / log