Jeff King [Mon, 21 May 2012 22:19:51 +0000 (18:19 -0400)]
fetch-pack: sort the list of incoming refs
Having the list sorted means we can avoid some quadratic
algorithms when comparing lists.
These should typically be sorted already, but they do come
from the remote, so let's be extra careful. Our ref-sorting
implementation does a mergesort, so we do not have to care
about performance degrading in the common case that the list
is already sorted.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 21 May 2012 22:17:20 +0000 (18:17 -0400)]
fetch-pack: avoid quadratic behavior in remove_duplicates
We remove duplicate entries from the list of refs we are
fed in fetch-pack. The original algorithm is quadratic over
the number of refs, but since the list is now guaranteed to
be sorted, we can do it in linear time.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 21 May 2012 22:17:02 +0000 (18:17 -0400)]
fetch-pack: sort incoming heads
There's no reason to preserve the incoming order of the
heads we're requested to fetch. By having them sorted, we
can replace some of the quadratic algorithms with linear
ones.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 20 May 2012 22:45:35 +0000 (15:45 -0700)]
Merge branch 'maint'
By Jens Lehmann (1) and Johannes Sixt (1)
* maint:
Consistently use "superproject" instead of "supermodule"
t3404: begin "exchange commits with -p" test with correct preconditions
Jens Lehmann [Sun, 20 May 2012 13:28:26 +0000 (15:28 +0200)]
Consistently use "superproject" instead of "supermodule"
We fairly consistently say "superproject" and never "supermodule" these
days. But there are seven occurrences of "supermodule" left in the current
work tree. Three appear in Release Notes for 1.5.3 and 1.7.7, three in
test names and one in a C-code comment.
Replace all occurrences of "supermodule" outside of the Release Notes
(which shouldn't be changed after the fact) with "superproject" for
consistency.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sat, 19 May 2012 13:14:16 +0000 (15:14 +0200)]
t3404: begin "exchange commits with -p" test with correct preconditions
The test case shows a bug in 'rebase -p', but even if the bug were fixed
the test would fail because it did not ensure that the preconditions match
the postconditions that were checked. Insert the suitable 'git checkout'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 17 May 2012 22:22:29 +0000 (15:22 -0700)]
Merge branch 'nd/i18n-parseopt'
Text from "git cmd --help" are getting prepared for i18n.
By Nguyễn Thái Ngọc Duy
* nd/i18n-parseopt:
i18n: apply: mark parseopt strings for translation
i18n: parseopt: lookup help and argument translations when showing usage
Junio C Hamano [Thu, 17 May 2012 22:22:13 +0000 (15:22 -0700)]
Merge branch 'rs/xdiff-lose-emit-func'
Simplifies the interface between the implementation of "blame" and
underlying xdiff engine, and removes a lot of unused or unnecessary code
from the latter.
By René Scharfe (6) and Ramsay Jones (1)
* rs/xdiff-lose-emit-func:
builtin/blame.c: Fix a "Using plain integer as NULL pointer" warning
xdiff: remove unused functions
xdiff: remove emit_func() and xdi_diff_hunks()
blame: factor out helper for calling xdi_diff()
blame: use hunk_func(), part 2
blame: use hunk_func(), part 1
xdiff: add hunk_func()
Junio C Hamano [Thu, 17 May 2012 22:21:46 +0000 (15:21 -0700)]
Merge branch 'ld/git-p4-tags-and-labels'
By Luke Diamand
* ld/git-p4-tags-and-labels:
git p4: fix bug when enabling tag import/export via config variables
git p4: fix bug when verbose enabled with tag export
git p4: add test for tag import/export enabled via config
Avishay Lavie [Tue, 15 May 2012 08:45:50 +0000 (11:45 +0300)]
git-svn: support rebase --preserve-merges
When git svn rebase is performed after an unpushed merge, the
rebase operation follows both parents and replays both the user's
local commits and those from the merged branch. This is usually
not the intended behavior.
This patch adds support for the --preserve-merges/-p flag which
allows for a better workflow by re-applying merge commits as merges.
[ew: fixed a minor syntax error]
Signed-off-by: Avishay Lavie <avishay.lavie@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
Junio C Hamano [Mon, 14 May 2012 18:50:40 +0000 (11:50 -0700)]
Merge branch 'nd/threaded-index-pack'
Enables threading in index-pack to resolve base data in parallel.
By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1)
* nd/threaded-index-pack:
index-pack: disable threading if NO_PREAD is defined
index-pack: support multithreaded delta resolving
index-pack: restructure pack processing into three main functions
compat/win32/pthread.h: Add an pthread_key_delete() implementation
Junio C Hamano [Mon, 14 May 2012 18:49:18 +0000 (11:49 -0700)]
Merge branch 'master' of git://github.com/git-l10n/git-po
By Ralf Thielow (6) and others
via Jiang Xin (3) and Ralf Thielow (1)
* 'master' of git://github.com/git-l10n/git-po:
l10n: zh_CN.po: translate 1 new message
l10n: de.po: translate one new message
l10n: de.po: unify translation of "ahead" and "behind"
l10n: de.po: collection of improvements
l10n: de.po: translate "remote" as "extern"
l10n: de.po: translate "track" as "beobachten"
l10n: add new members to German translation team
l10n: de.po: collection of suggestions
l10n: de.po: translate "bad" as "ungültig" ("invalid")
l10n: de.po: hopefully uncontroversial fixes
l10n: de.po: translate "bare" as "bloß"
l10n: Update git.pot (275 new, 15 removed messages)
l10n: Update git.pot (1 new messages)
Junio C Hamano [Mon, 14 May 2012 18:47:49 +0000 (11:47 -0700)]
Merge branch 'maint' of git://github.com/git-l10n/git-po into maint
By Ralf Thielow (6) and others
via Jiang Xin
* 'maint' of git://github.com/git-l10n/git-po:
l10n: zh_CN.po: translate 1 new message
l10n: de.po: translate one new message
l10n: de.po: unify translation of "ahead" and "behind"
l10n: de.po: collection of improvements
l10n: de.po: translate "remote" as "extern"
l10n: de.po: translate "track" as "beobachten"
l10n: add new members to German translation team
l10n: de.po: collection of suggestions
l10n: de.po: translate "bad" as "ungültig" ("invalid")
l10n: de.po: hopefully uncontroversial fixes
l10n: de.po: translate "bare" as "bloß"
l10n: Update git.pot (1 new messages)
Junio C Hamano [Mon, 14 May 2012 18:46:16 +0000 (11:46 -0700)]
Merge branch 'jk/maint-reflog-walk-count-vs-time' into maint
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
Junio C Hamano [Mon, 14 May 2012 18:42:34 +0000 (11:42 -0700)]
Merge branch 'jk/maint-tformat-with-z' into maint
By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
Junio C Hamano [Mon, 14 May 2012 18:42:22 +0000 (11:42 -0700)]
Merge branch 'js/checkout-detach-count' into maint
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
Junio C Hamano [Mon, 14 May 2012 18:41:40 +0000 (11:41 -0700)]
Merge branch 'ef/maint-clone-progress-fix' into maint
Some time ago, "git clone" lost the progress output for its "checkout"
phase; when run without any "--quiet" option, it should give progress to
the lengthy operation.
By Erik Faye-Lund
* ef/maint-clone-progress-fix:
clone: fix progress-regression
pack-protocol: fix first-want separator in the examples
When sending the "want" list, the capabilities list is separated from
the obj-id by a SP instead of NUL as in the ref advertisement. The
text is correct, but the examples wrongly show the separator as
NUL. Fix the example so it uses SP.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 11 May 2012 18:30:07 +0000 (11:30 -0700)]
Merge branch 'jk/maint-reflog-walk-count-vs-time'
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
Junio C Hamano [Fri, 11 May 2012 18:18:43 +0000 (11:18 -0700)]
Merge branch 'ct/advise-push-default' into maint
The cases "git push" fails due to non-ff can be broken into three
categories; each case is given a separate advise message.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
Junio C Hamano [Fri, 11 May 2012 18:16:45 +0000 (11:16 -0700)]
Merge branch 'jk/repack-no-explode-objects-from-old-pack' into maint
"git repack" used to write out unreachable objects as loose objects
when repacking, even if such loose objects will immediately pruned
due to its age.
By Jeff King
* jk/repack-no-explode-objects-from-old-pack:
gc: use argv-array for sub-commands
argv-array: add a new "pushl" method
argv-array: refactor empty_argv initialization
gc: do not explode objects which will be immediately pruned
Heiko Voigt [Thu, 10 May 2012 18:59:04 +0000 (20:59 +0200)]
document submdule.$name.update=none option for gitmodules
This option was not yet described in the gitmodules documentation. We
only described it in the 'git submodule' command documentation but
gitmodules is the more natural place to look.
A short reference in the 'git submodule' documentation should be
sufficient since the details can now be found in the documentation to
gitmodules.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 10 May 2012 17:49:46 +0000 (10:49 -0700)]
Merge branch 'jk/status-porcelain-z-b'
"git status --porcelain" ignored "--branch" option by mistake. The output
for "git status --branch -z" was also incorrect and did not terminate the
record for the current branch name with NUL as asked.
By Jeff King
via Jeff King
* jk/status-porcelain-z-b:
status: refactor colopts handling
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
Junio C Hamano [Thu, 10 May 2012 17:49:35 +0000 (10:49 -0700)]
Merge branch 'ef/maint-clone-progress-fix'
Some time ago, "git clone" lost the progress output for its "checkout"
phase; when run without any "--quiet" option, it should give progress to
the lengthy operation.
By Erik Faye-Lund
* ef/maint-clone-progress-fix:
clone: fix progress-regression
Junio C Hamano [Thu, 10 May 2012 17:49:25 +0000 (10:49 -0700)]
Merge branch 'js/checkout-detach-count'
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
Junio C Hamano [Thu, 10 May 2012 17:49:18 +0000 (10:49 -0700)]
Merge branch 'jc/install-no-hardlinks'
Your build platform may support hardlinks but you may prefer not to use
them, e.g. when installing to DESTDIR to make a tarball and untarring on
a filesystem that has poor support for hardlinks.
The Makefile in git-gui project may need to learn to honor the same
setting; it unconditionally creates git-citool by hardlinking git-gui.
Junio C Hamano [Thu, 10 May 2012 17:49:13 +0000 (10:49 -0700)]
Merge branch 'nd/stream-to-archive'
Stream large blobs directly out to archive files without slurping
everything in memory first.
By René Scharfe (6) and Nguyễn Thái Ngọc Duy (4)
* nd/stream-to-archive:
t5000: rationalize unzip tests
archive-zip: streaming for deflated files
archive-zip: streaming for stored files
archive-zip: factor out helpers for writing sizes and CRC
archive-zip: remove uncompressed_size
archive-tar: stream large blobs to tar file
archive: delegate blob reading to backend
archive-tar: unindent write_tar_entry by one level
archive-tar: turn write_tar_entry into blob-writing only
streaming: void pointer instead of char pointer
Junio C Hamano [Thu, 10 May 2012 17:49:07 +0000 (10:49 -0700)]
Merge branch 'mh/ref-api-lazy-loose'
Refs API is updated to lazily read sub-hierarchies of refs/ namespace,
so that we do not have to grab everything from the filesystem when we
are only interested in listing branches, for example.
By Michael Haggerty (17) and Junio C Hamano (1)
* mh/ref-api-lazy-loose:
refs: fix find_containing_dir() regression
refs: read loose references lazily
read_loose_refs(): eliminate ref_cache argument
struct ref_dir: store a reference to the enclosing ref_cache
search_for_subdir(): return (ref_dir *) instead of (ref_entry *)
get_ref_dir(): add function for getting a ref_dir from a ref_entry
read_loose_refs(): rename function from get_ref_dir()
refs: wrap top-level ref_dirs in ref_entries
find_containing_dir(): use strbuf in implementation of this function
bisect: copy filename string obtained from git_path()
do_for_each_reflog(): use a strbuf to hold logfile name
do_for_each_reflog(): return early on error
get_ref_dir(): take the containing directory as argument
refs.c: extract function search_for_subdir()
get_ref_dir(): require that the dirname argument ends in '/'
get_ref_dir(): rename "base" parameter to "dirname"
get_ref_dir(): use a strbuf to hold refname
get_ref_dir(): return early if directory cannot be read
Junio C Hamano [Thu, 10 May 2012 17:08:54 +0000 (10:08 -0700)]
Merge branch 'jk/maint-push-progress' into maint
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
Junio C Hamano [Thu, 10 May 2012 17:06:52 +0000 (10:06 -0700)]
Merge branch 'lp/diffstat-with-graph' into maint
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (3)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
test-lib: skip test with COLUMNS=1 under mksh
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
René Scharfe [Wed, 9 May 2012 20:43:30 +0000 (22:43 +0200)]
xdiff: remove unused functions
The functions xdl_cha_first(), xdl_cha_next() and xdl_atol() are not used
by us. While removing them increases the difference to the upstream
version of libxdiff, it only adds a bit to the more than 600 differing
lines in xutils.c (mmfile_t management was simplified significantly when
the library was imported initially). Besides, if upstream modifies these
functions in the future, we won't need to think about importing those
changes, so in that sense it makes tracking modifications easier.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erik Faye-Lund [Tue, 8 May 2012 17:22:33 +0000 (19:22 +0200)]
checkout: do not corrupt HEAD on empty repo
In abe1998 ("git checkout -b: allow switching out of an unborn
branch"), a code-path overly-optimisticly assumed that a
branch-name was specified. This is not always the case, and as
a result a NULL-pointer was attempted printed to .git/HEAD.
This could lead to at least two different failure modes:
1) vsnprintf formated the NULL-string as something useful (e.g
"(null)")
2) vsnprintf crashed
Neither were very convenient for formatting a new HEAD-reference.
To fix this, reintroduce some strictness so we only take this
new codepath if a banch-name was specified.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: remove lego in i18n string in gitdiff_verify_name
It marks the string "...inconsistent %s filename..." where %s is either
"old" or "new" from caller. Make it two strings "...inconsistent new
filename..." and "...inconsistent old filename...".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ralf Thielow [Tue, 8 May 2012 17:03:30 +0000 (19:03 +0200)]
l10n: de.po: translate one new message
Translate one new messages came from git.pot
update in 7795e42 (l10n: Update git.pot (1 new messages)).
It also updates and reformats the de.po file due to "msgmerge".
Ralf Thielow [Fri, 4 May 2012 16:59:53 +0000 (18:59 +0200)]
l10n: de.po: translate "remote" as "extern"
The word "remote" was translated as "entfernt"
and "anders". Both of them aren't really good
because "anders" in German means "other" and
"entfernt" has two different meanings and could
result in confusion to the users.
We've changed the translation to "extern".
Suggested-by: Jan Krüger <jk@jk.gs> Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
Ralf Thielow [Fri, 4 May 2012 16:27:54 +0000 (18:27 +0200)]
l10n: de.po: translate "track" as "beobachten"
The word "track" was translated as "verfolgen"
and "folgen". We've decided to translate "track" in
the meaning of tracked files/content as "beobachten"
and in the remote-tracking sense as "folgen".
Suggested-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
projects / git / log