Tom Lane [Sun, 4 Jun 2017 17:34:05 +0000 (13:34 -0400)]
#ifdef out assorted unused GEQO code.
I'd always assumed that backend/optimizer/geqo/'s remarkably poor
showing on code coverage metrics was because we weren't exercising
it much in the regression tests. But it turns out that a good chunk
of the problem is that there's a bunch of code that is physically
unreachable (because the calls to it are #ifdef'd out in geqo_main.c)
but is being built anyway. Making the called code have #if guards
similar to the calling code saves a couple of kilobytes of executable
size and should make the coverage numbers more reflective of reality.
It's arguable that we should just delete all the unused recombination
mechanisms altogether, but I didn't feel a need to go that far today.
Tom Lane [Sun, 4 Jun 2017 16:02:31 +0000 (12:02 -0400)]
Disallow CREATE INDEX if table is already in use in current session.
If we allow this, whatever outer command has the table open will not know
about the new index and may fail to update it as needed, as shown in a
report from Laurenz Albe. We already had such a prohibition in place for
ALTER TABLE, but the CREATE INDEX syntax missed the check.
Fixing it requires an API change for DefineIndex(), which conceivably
would break third-party extensions if we were to back-patch it. Given
how long this problem has existed without being noticed, fixing it in
the back branches doesn't seem worth that risk.
Tom Lane [Sat, 3 Jun 2017 21:10:25 +0000 (17:10 -0400)]
Add some missing backslash commands to psql's tab-completion knowledge.
\if and related commands were overlooked here, as were \dRp and \dRs
from the logical-replication patch, as was \?.
While here, reformat the list to put each new first command letter on
a separate line; perhaps that will limit the need to reflow the whole
list when we add more commands in future.
Tom Lane [Sat, 3 Jun 2017 18:36:25 +0000 (14:36 -0400)]
Fix <> and pattern-NOT-match estimators to handle nulls correctly.
These estimators returned 1 minus the corresponding equality/match
estimate, which is incorrect: we need to subtract off the fraction
of nulls in the column, since those are neither equal nor not equal
to the comparison value. The error only becomes obvious if the
nullfrac is large, but it could be very bad in a mostly-nulls
column, as reported in bug #14676 from Marko Tiikkaja.
To fix the <> case, refactor eqsel() and neqsel() to call a common
support routine, which can be made to account for nullfrac correctly.
The pattern-match cases were already factored that way, and it was
simply an oversight that patternsel() wasn't subtracting off nullfrac.
neqjoinsel() has a similar problem, but since we're elsewhere discussing
changing its behavior entirely, I left it alone for now.
This is a very longstanding bug, but I'm hesitant to back-patch a fix for
it. Given the lack of prior complaints, such cases must not come up often,
so it's probably not worth the risk of destabilizing plans in stable
branches.
Tom Lane [Sat, 3 Jun 2017 17:48:15 +0000 (13:48 -0400)]
Fix old corner-case logic error in final_cost_nestloop().
When costing a nestloop with stop-at-first-inner-match semantics, and a
non-indexscan inner path, final_cost_nestloop() wants to charge the full
scan cost of the inner rel at least once, with additional scans charged
at inner_rescan_run_cost which might be less. However the logic for
doing this effectively assumed that outer_matched_rows is at least 1.
If it's zero, which is not unlikely for a small outer rel, we ended up
charging inner_run_cost plus N times inner_rescan_run_cost, as much as
double the correct charge for an outer rel with only one row that
we're betting won't be matched. (Unless the inner rel is materialized,
in which case it has very small inner_rescan_run_cost and the cost
is not so far off what it should have been.)
The upshot of this was that the planner had a tendency to select plans
that failed to make effective use of the stop-at-first-inner-match
semantics, and that might have Materialize nodes in them even when the
predicted number of executions of the Materialize subplan was only 1.
This was not so obvious before commit 9c7f5229a, because the case only
arose in connection with semi/anti joins where there's not freedom to
reverse the join order. But with the addition of unique-inner joins,
it could result in some fairly bad planning choices, as reported by
Teodor Sigaev. Indeed, some of the test cases added by that commit
have plans that look dubious on closer inspection, and are changed
by this patch.
Fix the logic to ensure that we don't charge for too many inner scans.
I chose to adjust it so that the full-freight scan cost is associated
with an unmatched outer row if possible, not a matched one, since that
seems like a better model of what would happen at runtime.
This is a longstanding bug, but given the lesser impact in back branches,
and the lack of field complaints, I won't risk a back-patch.
Receive invalidation messages correctly in tablesync worker
We didn't accept any invalidation messages until the whole sync process
had finished (because it flattens all the remote transactions in the
single one). So the sync worker didn't learn about subscription
changes/drop until it has finished. This could lead to "orphaned" sync
workers.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com> Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Andres Freund [Sat, 3 Jun 2017 02:05:57 +0000 (19:05 -0700)]
Allow parallelism in COPY (query) TO ...;
Previously this was not allowed, as copy.c didn't set the
CURSOR_OPT_PARALLEL_OK flag when planning the query. Set it.
While the lack of parallel query for COPY isn't strictly speaking a
bug, it does prevent parallelism from being used in a facility
commonly used to run long running queries. Thus backpatch to 9.6.
Author: Andres Freund
Discussion: https://postgr.es/m/20170531231958.ihanapplorptykzm@alap3.anarazel.de
Backpatch: 9.6, where parallelism was introduced.
Peter Eisentraut [Tue, 30 May 2017 18:57:01 +0000 (14:57 -0400)]
Remove replication slot name check from ReplicationSlotAcquire()
When trying to access a replication slot that is supposed to already
exist, we don't need to check the naming rules again. If the slot
does not exist, we will then get a "does not exist" error message, which
is generally more useful from the perspective of an end user.
Fix signal handling in logical replication workers
The logical replication worker processes now use the normal die()
handler for SIGTERM and CHECK_FOR_INTERRUPTS() instead of custom code.
One problem before was that the apply worker would not exit promptly
when a subscription was dropped, which could lead to deadlocks.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com> Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Move the walrcv_disconnect() calls into the before_shmem_exit handler.
This makes sure the call is always made even during exit by signal, it
saves some duplicate code, and it makes the logic more similar to
walreceiver.c.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
psql: Fix display of whether table is part of publication
If a FOR ALL TABLES publication was present, \d of a table would claim
for each table that it was part of the publication, even for tables that
are ignored for this purpose, such as system tables and unlogged tables.
Fix the query by using the function pg_get_publication_tables(), which
was intended for this purpose.
Andres Freund [Wed, 31 May 2017 23:39:27 +0000 (16:39 -0700)]
Make ALTER SEQUENCE, including RESTART, fully transactional.
Previously the changes to the "data" part of the sequence, i.e. the
one containing the current value, were not transactional, whereas the
definition, including minimum and maximum value were. That leads to
odd behaviour if a schema change is rolled back, with the potential
that out-of-bound sequence values can be returned.
To avoid the issue create a new relfilenode fork whenever ALTER
SEQUENCE is executed, similar to how TRUNCATE ... RESTART IDENTITY
already is already handled.
This commit also makes ALTER SEQUENCE RESTART transactional, as it
seems to be too confusing to have some forms of ALTER SEQUENCE behave
transactionally, some forms not. This way setval() and nextval() are
not transactional, but DDL is, which seems to make sense.
This commit also rolls back parts of the changes made in 3d092fe540
and f8dc1985f as they're now not needed anymore.
Author: Andres Freund
Discussion: https://postgr.es/m/20170522154227.nvafbsm62sjpbxvd@alap3.anarazel.de
Backpatch: Bug is in master/v10 only
Tom Lane [Thu, 1 Jun 2017 17:32:55 +0000 (13:32 -0400)]
Always use -fPIC, not -fpic, when building shared libraries with gcc.
On some platforms, -fpic fails for sufficiently large shared libraries.
We've mostly not hit that boundary yet, but there are some extensions
such as Citus and pglogical where it's becoming a problem. A bit of
research suggests that the penalty for -fPIC is small, in the
single-digit-percentage range --- and there's none at all on popular
platforms such as x86_64. So let's just default to -fPIC everywhere
and provide one less thing for extension developers to worry about.
Per complaint from Christoph Berg. Back-patch to all supported branches.
(I did not bother to touch the recently-removed Makefiles for sco and
unixware in the back branches, though. We'd have no way to test that
it doesn't break anything on those platforms.)
Magnus Hagander [Wed, 31 May 2017 18:57:25 +0000 (20:57 +0200)]
Generate pg_basebackup temporary slot name using backend pid
Using the client pid can easily be non-unique when used on different
hosts. Using the backend pid should be guaranteed unique, since the
temporary slot gets removed when the client disconnects so it will be
gone even if the pid is renewed.
Tom Lane [Wed, 31 May 2017 15:27:21 +0000 (11:27 -0400)]
Avoid -Wconversion warnings from direct use of GET_n_BYTES macros.
The GET/SET_n_BYTES macros are meant to be infrastructure for the
DatumGetFoo/FooGetDatum macros, which include a cast to the intended
target type. Using them directly without a cast, as DatumGetFloat4
and friends previously did, can yield warnings when -Wconversion is on.
This is of little significance when building Postgres proper, because
there are such a huge number of such warnings in the server that nobody
would think -Wconversion is of any use. But some extensions build with
-Wconversion due to outside constraints. Commit 14cca1bf8 did a disservice
to those extensions by moving DatumGetFloat4 et al into postgres.h,
where they can now cause warnings in extension builds.
To fix, use DatumGetInt32 and friends in place of the low-level macros.
This is arguably a bit cleaner anyway.
Alvaro Herrera [Tue, 30 May 2017 21:32:53 +0000 (17:32 -0400)]
brin: Don't crash on auto-summarization
We were trying to free a pointer into a shared buffer, which never
works; and we were failing to release the buffer lock appropriately.
Fix those omissions.
While at it, improve documentation for brinGetTupleForHeapBlock, the
inadequacy of which evidently caused these bugs in the first place.
Reported independently by Zhou Digoal (bug #14668) and Alexander Sosna.
Alvaro Herrera [Tue, 30 May 2017 19:45:42 +0000 (15:45 -0400)]
Fix wording in amvalidate error messages
Remove some gratuituous message differences by making the AM name
previously embedded in each message be a %s instead. While at it, get
rid of terminology that's unclear and unnecessary in one message.
Tom Lane [Tue, 30 May 2017 15:32:41 +0000 (11:32 -0400)]
Fix omission of locations in outfuncs/readfuncs partitioning node support.
We could have limped along without this for v10, which was my intention
when I annotated the bug in commit 76a3df6e5. But consensus is that it's
better to fix it now and take the cost of a post-beta1 initdb (which is
needed because these node types are stored in pg_class.relpartbound).
Since we're forcing initdb anyway, take the opportunity to make the node
type identification strings match the node struct names, instead of being
randomly different from them.
Tom Lane [Tue, 30 May 2017 01:48:26 +0000 (21:48 -0400)]
Fix improper quoting of format_type_be() output.
Per our message style guidelines, error messages incorporating the
results of format_type_be() and its siblings should not add quotes
around those results, because those functions already add quotes
at need. Fix a few places that hadn't gotten that memo.
Tom Lane [Mon, 29 May 2017 23:29:42 +0000 (19:29 -0400)]
Make edge-case behavior of jsonb_populate_record match json_populate_record
json_populate_record throws an error if asked to convert a JSON scalar
or array into a composite type. jsonb_populate_record was returning
a record full of NULL fields instead. It seems better to make it
throw an error for this case as well.
Tom Lane [Mon, 29 May 2017 22:51:56 +0000 (18:51 -0400)]
Fix thinko in JsObjectSize() macro.
The macro gave the wrong answers for a JsObject with is_json == 0:
it would return 1 if jsonb_cont == NULL, or if that wasn't NULL,
it would return 1 for any non-zero size.
We could fix that, but the only use of this macro at present is in the
JsObjectIsEmpty() macro, so it seems simpler and clearer to get rid of
JsObjectSize() and put corrected logic into JsObjectIsEmpty().
Thinko in commit cf35346e8, so no need for back-patch.
Tom Lane [Mon, 29 May 2017 21:08:16 +0000 (17:08 -0400)]
Prevent running pg_resetwal/pg_resetxlog against wrong-version data dirs.
pg_resetwal (formerly pg_resetxlog) doesn't insist on finding a matching
version number in pg_control, and that seems like an important thing to
preserve since recovering from corrupt pg_control is a prime reason to
need to run it. However, that means you can try to run it against a
data directory of a different major version, which is at best useless
and at worst disastrous. So as to provide some protection against that
type of pilot error, inspect PG_VERSION at startup and refuse to do
anything if it doesn't match. PG_VERSION is read-only after initdb,
so it's unlikely to get corrupted, and even if it were corrupted it would
be easy to fix by hand.
This hazard has been there all along, so back-patch to all supported
branches.
Tom Lane [Mon, 29 May 2017 19:19:07 +0000 (15:19 -0400)]
Allow NumericOnly to be "+ FCONST".
The NumericOnly grammar production accepted ICONST, + ICONST, - ICONST,
FCONST, and - FCONST, but for some reason not + FCONST. This led to
strange inconsistencies like
regression=# set random_page_cost = +4;
SET
regression=# set random_page_cost = 4000000000;
SET
regression=# set random_page_cost = +4000000000;
ERROR: syntax error at or near "4000000000"
(because 4000000000 is too large to be an ICONST). While there's
no actual functional reason to need to write a "+", if we allow
it for integers it seems like we should allow it for numerics too.
It's been like that forever, so back-patch to all supported branches.
Tom Lane [Mon, 29 May 2017 18:24:28 +0000 (14:24 -0400)]
More code review for get_qual_for_list().
Avoid trashing the input PartitionBoundSpec; while that might be safe for
current callers, it's certainly trouble waiting to happen. In the same
vein, make sure that all of the result data structure is freshly palloc'd,
rather than some of it being pointers into the input data structures
(which we don't know the lifespans of).
Simplify the logic for tacking on IS NULL or IS NOT NULL conditions some
more; commit 85c2b9a15 left a lot on the table there. And rearrange the
construction of the nodes into (what seems to me) a more logical order.
In passing, make sure that get_qual_for_range() also returns a freshly
palloc'd structure, since there's no value in having that guarantee for
only one kind of partitioning. And improve some comments there.
Tom Lane [Mon, 29 May 2017 03:20:28 +0000 (23:20 -0400)]
Code review focused on new node types added by partitioning support.
Fix failure to check that we got a plain Const from const-simplification of
a coercion request. This is the cause of bug #14666 from Tian Bing: there
is an int4 to money cast, but it's only stable not immutable (because of
dependence on lc_monetary), resulting in a FuncExpr that the code was
miserably unequipped to deal with, or indeed even to notice that it was
failing to deal with. Add test cases around this coercion behavior.
In view of the above, sprinkle the code liberally with castNode() macros,
in hope of catching the next such bug a bit sooner. Also, change some
functions that were randomly declared to take Node* to take more specific
pointer types. And change some struct fields that were declared Node*
but could be given more specific types, allowing removal of assorted
explicit casts.
Place PARTITION_MAX_KEYS check a bit closer to the code it's protecting.
Likewise check only-one-key-for-list-partitioning restriction in a less
random place.
Avoid not-per-project-style usages like !strcmp(...).
Fix assorted failures to avoid scribbling on the input of parse
transformation. I'm not sure how necessary this is, but it's entirely
silly for these functions to be expending cycles to avoid that and not
getting it right.
Add guards against partitioning on system columns.
Put backend/nodes/ support code into an order that matches handling
of these node types elsewhere.
Annotate the fact that somebody added location fields to PartitionBoundSpec
and PartitionRangeDatum but forgot to handle them in
outfuncs.c/readfuncs.c. This is fairly harmless for production purposes
(since readfuncs.c would just substitute -1 anyway) but it's still bogus.
It's not worth forcing a post-beta1 initdb just to fix this, but if we
have another reason to force initdb before 10.0, we should go back and
clean this up.
Contrariwise, somebody added location fields to PartitionElem and
PartitionSpec but forgot to teach exprLocation() about them.
Consolidate duplicative code in transformPartitionBound().
Improve a couple of error messages.
Improve assorted commentary.
Re-pgindent the files touched by this patch; this affects a few comment
blocks that must have been added quite recently.
Tom Lane [Sun, 28 May 2017 20:42:22 +0000 (16:42 -0400)]
Format v10 release notes' commit references more like previous releases.
Left-justify these comments, remove committer names, remove SGML markup
that was randomly added to some of them. Aside from being more consistent
with previous practice, this keeps the lines shorter than 80 characters,
improving readability in standard terminal windows.
Tom Lane [Sun, 28 May 2017 18:52:18 +0000 (14:52 -0400)]
Avoid locale-dependent output in select_views regression test.
Use 'COLLATE "C"' to force locale-independent sorting of the iexit
view results in select_views.sql. We aren't particularly interested
in the exact sorting behavior here, and this doesn't change the shape
of the generated plan, so it seems like a wash as far as the goals
of this test go.
This is in response to bug #14637 from Tomasz Kontusz. It doesn't
fully resolve his problem, because he also saw some diffs in the
create_index test. But other people have had issues with select_views
too, and this fix lets us drop the select_views_1.out variant expected
file altogether, which is a nice win from a maintenance standpoint.
Tom Lane [Fri, 26 May 2017 19:16:59 +0000 (15:16 -0400)]
Move autogenerated array types out of the way during ALTER ... RENAME.
Commit 9aa3c782c added code to allow CREATE TABLE/CREATE TYPE to not fail
when the desired type name conflicts with an autogenerated array type, by
dint of renaming the array type out of the way. But I (tgl) overlooked
that the same case arises in ALTER TABLE/TYPE RENAME. Fix that too.
Back-patch to all supported branches.
Report and patch by Vik Fearing, modified a bit by me
Tom Lane [Fri, 26 May 2017 16:51:05 +0000 (12:51 -0400)]
Fix pg_dump to not emit invalid SQL for an empty operator class.
If an operator class has no operators or functions, and doesn't need
a STORAGE clause, we emitted "CREATE OPERATOR CLASS ... AS ;" which
is syntactically invalid. Fix by forcing a STORAGE clause to be
emitted anyway in this case.
(At some point we might consider changing the grammar to allow CREATE
OPERATOR CLASS without an opclass_item_list. But probably we'd want to
omit the AS in that case, so that wouldn't fix this pg_dump issue anyway.)
It's been like this all along, so back-patch to all supported branches.
Daniel Gustafsson, tweaked by me to avoid a dangling-pointer bug
Peter Eisentraut [Thu, 18 May 2017 18:16:16 +0000 (14:16 -0400)]
Fix table syncing with different column order
Logical replication supports replicating between tables with different
column order. But this failed for the initial table sync because of a
logic error in how the column list for the internal COPY command was
composed. Fix that and also add a test.
Also fix a minor omission in the column name mapping cache. When
creating the mapping list, it would not skip locally dropped columns.
So if a remote column had the same name as a locally dropped
column (...pg.dropped...), then the expected error would not occur.
Peter Eisentraut [Wed, 24 May 2017 22:56:21 +0000 (18:56 -0400)]
Improve logical replication worker log messages
Reduce some redundant messages to DEBUG1. Be clearer about the
distinction between apply workers and table synchronization workers.
Add subscription and table name where possible.
Tom Lane [Wed, 24 May 2017 19:28:34 +0000 (15:28 -0400)]
Tighten checks for whitespace in functions that parse identifiers etc.
This patch replaces isspace() calls with scanner_isspace() in functions
that are likely to be presented with non-ASCII input. isspace() has
the small advantage that it will correctly recognize no-break space
in single-byte encodings (such as LATIN1); but it cannot work successfully
for any multibyte character, and depending on platform it might return
false positive results for some fragments of multibyte characters. That's
disastrous for functions that are trying to discard whitespace between
valid strings, as noted in bug #14662 from Justin Muise. Even treating
no-break space as whitespace is pretty questionable for the usages touched
here, because the core scanner would think it is an identifier character.
Affected functions are parse_ident(), parseNameAndArgTypes (underlying
regprocedurein() and siblings), SplitIdentifierString (used for parsing
GUCs and options that are qualified names or lists of names), and
SplitDirectoriesString (used for parsing GUCs that are lists of
directories).
All the functions adjusted here are parsing SQL identifiers and similar
constructs, so it's reasonable to insist that their definition of
whitespace match the core scanner. So we can hope that this won't cause
many backwards-compatibility problems. I've left alone isspace() calls
in places that aren't really expecting any non-ASCII input characters,
such as float8in().
Verify that the server constructed the SCRAM nonce correctly.
The nonce consists of client and server nonces concatenated together. The
client checks the nonce contained the client nonce, but it would get fooled
if the server sent a truncated or even empty nonce.
Reported by Steven Fackler to security@postgresql.org. Neither me or Steven
are sure what harm a malicious server could do with this, but let's fix it.
Tom Lane [Sun, 21 May 2017 17:05:16 +0000 (13:05 -0400)]
Fix precision and rounding issues in money multiplication and division.
The cash_div_intX functions applied rint() to the result of the division.
That's not merely useless (because the result is already an integer) but
it causes precision loss for values larger than 2^52 or so, because of
the forced conversion to float8.
On the other hand, the cash_mul_fltX functions neglected to apply rint() to
their multiplication results, thus possibly causing off-by-one outputs.
Per C standard, arithmetic between any integral value and a float value is
performed in float format. Thus, cash_mul_flt4 and cash_div_flt4 produced
answers good to only about six digits, even when the float value is exact.
We can improve matters noticeably by widening the float inputs to double.
(It's tempting to consider using "long double" arithmetic if available,
but that's probably too much of a stretch for a back-patched fix.)
Also, document that cash_div_intX operators truncate rather than round.
Per bug #14663 from Richard Pistole. Back-patch to all supported branches.
Tom Lane [Sun, 21 May 2017 15:46:04 +0000 (11:46 -0400)]
Fix contrib/sepgsql regression tests for partition NOT NULL change.
Commit 3ec76ff1f changed the partitioning logic to not install a forced
NOT NULL constraint on range partitioning columns. This affects the
expected output for contrib/sepgsql, because there's no longer LOG
entries reporting allowance of such a constraint. Per buildfarm.
Tom Lane [Fri, 19 May 2017 22:05:20 +0000 (18:05 -0400)]
Rethink flex flags for syncrep_scanner.l.
Using flex's -i switch to achieve case-insensitivity is not a very safe
practice, because the scanner's behavior may then depend on the locale
that flex was invoked in. In the particular example at hand, that's
not academic: the possible matches for "FIRST" will be different in a
Turkish locale than elsewhere. Do it the hard way instead, as our
other scanners do.
Also, drop use of -b -CF -p, because this scanner is only used when
parsing the contents of a GUC variable. That's not done often, and
the amount of text to be parsed can be expected to be trivial, so
prioritizing scanner speed over code size seems like quite the wrong
tradeoff. Using flex's default optimization options reduces the
size of syncrep_gram.o by more than 50%.
The case-insensitivity problem is new in HEAD (cf commit 3901fd70c).
The poor choice of optimization flags exists also in 9.6, but it doesn't
seem important enough to back-patch.
Robert Haas [Fri, 19 May 2017 20:49:38 +0000 (16:49 -0400)]
pg_upgrade: Handle hash index upgrades more smoothly.
Mark any old hash indexes as invalid so that they don't get used, and
create a script to run REINDEX on all of them. Without this, we'd
still try to use any upgraded hash indexes, but it would fail.
Amit Kapila, reviewed by me. Per a suggestion from Tom Lane.
Robert Haas [Fri, 19 May 2017 19:02:16 +0000 (15:02 -0400)]
Fix corruption of tableElts list by MergeAttributes().
Since commit e7b3349a8ad7afaad565c573fbd65fb46af6abbe, MergeAttributes
destructively modifies the input List, to which the caller's
CreateStmt still points. One may wonder whether this was already a
bug, but commit f0e44751d7175fa3394da2c8f85e3ceb3cdbfe63 made things
noticeably worse by adding additional destructive modifications so
that the caller's List might, in the case of creation a partitioned
table, no longer even be structurally valid. Restore the status quo
ante by assigning the return value of MergeAttributes back to
stmt->tableElts in the caller.
In most of the places where DefineRelation is called, it doesn't
matter what stmt->tableElts points to here or whether it's valid or
not, because the caller doesn't use the statement for anything after
DefineRelation returns anyway. However, ProcessUtilitySlow passes it
to EventTriggerCollectSimpleCommand, and that function tries to invoke
copyObject on it. If any of the CreateStmt's substructure is invalid
at that point, undefined behavior will result.
One might wonder whether this whole area needs further revision -
perhaps DefineRelation() ought not to be destructively modifying the
caller-provided CreateStmt at all. However, that would be a behavior
change for any event triggers using C code to inspect the CreateStmt,
so for now, just fix the crash.
Report by Amit Langote, who provided a somewhat different patch for it.
Robert Haas [Thu, 18 May 2017 17:48:10 +0000 (13:48 -0400)]
Don't explicitly mark range partitioning columns NOT NULL.
This seemed like a good idea originally because there's no way to mark
a range partition as accepting NULL, but that now seems more like a
current limitation than something we want to lock down for all time.
For example, there's a proposal to add the notion of a default
partition which accepts all rows not otherwise routed, which directly
conflicts with the idea that a range-partitioned table should never
allow nulls anywhere. So let's change this while we still can, by
putting the NOT NULL test into the partition constraint instead of
changing the column properties.
Amit Langote and Robert Haas, reviewed by Amit Kapila
Peter Eisentraut [Thu, 18 May 2017 00:47:37 +0000 (20:47 -0400)]
Improve CREATE SUBSCRIPTION option parsing
When creating a subscription with slot_name = NONE, we failed to check
that also create_slot = false and enabled = false were set. This
created an invalid subscription and could later lead to a crash if a
NULL slot name was accessed. Add more checks around that for
robustness.
Robert Haas [Wed, 17 May 2017 18:31:48 +0000 (14:31 -0400)]
Code review for make_partition_op_expr.
It's better to use the actual keynum here rather than 0, because
someday someone might try to make list partitioning work with
multiple partitioning columns.
Tom Lane [Wed, 17 May 2017 17:04:03 +0000 (13:04 -0400)]
Revert changes to pg_basebackup and pg_waldump usage() code.
Partially revert commit c079673dcb7f210617c9fc1470e6bf166d8a2971.
There were complaints that splitting switch descriptions would
complicate translation efforts. There are probably ways to resolve
the formatting problem without doing that, but undo it while we're
discussing.
Tom Lane [Wed, 17 May 2017 16:24:19 +0000 (12:24 -0400)]
Make psql handle EOF during COPY FROM STDIN properly on all platforms.
When stdin is a terminal, it's possible to end a COPY FROM STDIN with
a keyboard EOF signal (typically control-D), and then keep on issuing
SQL commands. One would expect another COPY FROM STDIN to work as well,
but on some platforms it did not. This turns out to be because we were
not resetting the stream's feof() flag, and BSD-ish versions of fread()
and fgets() won't attempt to read more data if that's set.
The misbehavior is observed on BSDen (including macOS), but not Linux,
Windows, or SysV-ish Unixen, which makes this a portability bug not
just a missing feature.
Add a clearerr() call to fix the behavior, and improve the prompt that's
issued when copying from a TTY to mention that EOF signals work.
It's been like this forever, so back-patch to all supported branches.
Peter Eisentraut [Wed, 17 May 2017 02:57:16 +0000 (22:57 -0400)]
Check relkind of tables in CREATE/ALTER SUBSCRIPTION
We used to only check for a supported relkind on the subscriber during
replication, which is needed to ensure that the setup is valid and we
don't crash. But it's also useful to tell the user immediately when
CREATE or ALTER SUBSCRIPTION is executed that the relation being added
to the subscription is not of a supported relkind.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com> Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Tom Lane [Wed, 17 May 2017 00:36:35 +0000 (20:36 -0400)]
Preventive maintenance in advance of pgindent run.
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
Tom Lane [Tue, 16 May 2017 23:33:31 +0000 (19:33 -0400)]
Fix leakage of memory context header in find_all_inheritors().
Commit 827d6f977 contained the same misunderstanding of hash_create's API
as commit 090010f2e. As in 5d00b764c, remove the unnecessary layer of
memory context. (This bug is less significant than the other one, since
the extra context would be under a relatively short-lived context, but
it's still a bug.)
Tom Lane [Tue, 16 May 2017 19:24:52 +0000 (15:24 -0400)]
Try to ensure that stats collector's receive buffer size is at least 100KB.
Since commit 4e37b3e15, buildfarm member frogmouth has been failing
occasionally with symptoms indicating that some expected stats data is
getting dropped. The reason that that commit changed the behavior seems
probably to be that more data is getting shoved at the collector in a short
span of time. In current sources, the stats test's first session sends
about 9KB of data while exiting, which is probably the same as what was
sent just before wait_for_stats() in the previous test design. But now,
the test's second session is starting up concurrently, and it sends another
2KB (presumably reflecting its initial catalog accesses). Since frogmouth
is running on Windows XP, which reputedly has a default socket receive
buffer size of only 8KB, it is not very surprising if this has put us over
the threshold where the receive buffer can overflow and drop messages.
The same mechanism could very easily explain the intermittent stats test
failures we've been seeing for years, since background processes such
as the bgwriter will sometimes send data concurrently with all this, and
could thus cause occasional buffer overflows.
Hence, insert some code into pgstat_init() to increase the stats socket's
receive buffer size to 100KB if it's less than that. (On failure, emit a
LOG message, but keep going.) Modern systems seem to have default sizes
in the range of 100KB-250KB, but older platforms don't. I couldn't find
any platforms that wouldn't accept 100KB, so in theory this won't cause
any portability problems.
If this is successful at reducing the buildfarm failure rate in HEAD,
we should back-patch it, because it's certain that similar buffer overflows
happen in the field on platforms with small buffer sizes. Going forward,
there might be an argument for trying to increase the buffer size even
more, but let's take a baby step first.
Tom Lane [Tue, 16 May 2017 03:27:51 +0000 (23:27 -0400)]
In SSL tests, don't scribble on permissions of a repo file.
Modifying the permissions of a persistent file isn't really much nicer
than modifying its contents, even if git doesn't currently notice it.
Adjust the test script to make a copy and set the permissions of that
instead.
Michael Paquier, per a gripe from me. Back-patch to 9.5 where these
tests were introduced.
projects / postgresql / log