Remove support for OpenSSL versions older than 0.9.8.
OpenSSL officially only supports 1.0.1 and newer. Some OS distributions
still provide patches for 0.9.8, but anything older than that is not
interesting anymore. Let's simplify things by removing compatibility code.
Tom Lane [Mon, 29 Aug 2016 13:29:26 +0000 (09:29 -0400)]
Make AllocSetContextCreate throw an error for bad context-size parameters.
The previous behavior was to silently change them to something valid.
That obscured the bugs fixed in commit ea268cdc9, and generally seems
less useful than complaining. Unlike the previous commit, though,
we'll do this in HEAD only --- it's a bit too late to be possibly
breaking third-party code in 9.6.
Fujii Masao [Mon, 29 Aug 2016 05:34:58 +0000 (14:34 +0900)]
Fix pg_xlogdump so that it handles cross-page XLP_FIRST_IS_CONTRECORD record.
Previously pg_xlogdump failed to dump the contents of the WAL file
if the file starts with the continuation WAL record which spans
more than one pages. Since pg_xlogdump assumed that the continuation
record always fits on a page, it could not find the valid WAL record to
start reading from in that case.
This patch changes pg_xlogdump so that it can handle a continuation
WAL record which crosses a page boundary and find the valid record
to start reading from.
Back-patch to 9.3 where pg_xlogdump was introduced.
Author: Pavan Deolasee Reviewed-By: Michael Paquier and Craig Ringer
Discussion: CABOikdPsPByMiG6J01DKq6om2+BNkxHTPkOyqHM2a4oYwGKsqQ@mail.gmail.com
Tom Lane [Sat, 27 Aug 2016 21:50:38 +0000 (17:50 -0400)]
Add macros to make AllocSetContextCreate() calls simpler and safer.
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Tom Lane [Fri, 26 Aug 2016 20:20:17 +0000 (16:20 -0400)]
Add a nonlocalized version of the severity field to client error messages.
This has been requested a few times, but the use-case for it was never
entirely clear. The reason for adding it now is that transmission of
error reports from parallel workers fails when NLS is active, because
pq_parse_errornotice() wrongly assumes that the existing severity field
is nonlocalized. There are other ways we could have fixed that, but the
other options were basically kluges, whereas this way provides something
that's at least arguably a useful feature along with the bug fix.
Per report from Jakob Egger. Back-patch into 9.6, because otherwise
parallel query is essentially unusable in non-English locales. The
problem exists in 9.5 as well, but we don't want to risk changing
on-the-wire behavior in 9.5 (even though the possibility of new error
fields is specifically called out in the protocol document). It may
be sufficient to leave the issue unfixed in 9.5, given the very limited
usefulness of pq_parse_errornotice in that version.
Tom Lane [Fri, 26 Aug 2016 19:04:05 +0000 (15:04 -0400)]
Fix potential memory leakage from HandleParallelMessages().
HandleParallelMessages leaked memory into the caller's context. Since it's
called from ProcessInterrupts, there is basically zero certainty as to what
CurrentMemoryContext is, which means we could be leaking into long-lived
contexts. Over the processing of many worker messages that would grow to
be a problem. Things could be even worse than just a leak, if we happened
to service the interrupt while ErrorContext is current: elog.c thinks it
can reset that on its own whim, possibly yanking storage out from under
HandleParallelMessages.
Give HandleParallelMessages its own dedicated context instead, which we can
reset during each call to ensure there's no accumulation of wasted memory.
Tom Lane [Fri, 26 Aug 2016 18:15:47 +0000 (14:15 -0400)]
Fix assorted small bugs in ThrowErrorData().
Copy the palloc'd strings into the correct context, ie ErrorContext
not wherever the source ErrorData is. This would be a large bug,
except that it appears that all catchers of thrown errors do either
EmitErrorReport or CopyErrorData before doing anything that would
cause transient memory contexts to be cleaned up. Still, it's wrong
and it will bite somebody someday.
Fix failure to copy cursorpos and internalpos.
Utter the appropriate incantations involving recursion_depth, so that
we'll behave sanely if we get an error inside pstrdup. (In general,
the body of this function ought to act like, eg, errdetail().)
Tom Lane [Fri, 26 Aug 2016 14:07:28 +0000 (10:07 -0400)]
Fix logic for adding "parallel worker" context line to worker errors.
The previous coding here was capable of adding a "parallel worker" context
line to errors that were not, in fact, returned from a parallel worker.
Instead of using an errcontext callback to add that annotation, just paste
it onto the message by hand; this looks uglier but is more reliable.
You can use ALTER FOREIGN TABLE SET WITH OIDS on a foreign table, but the
oid column read out as zeros, because the postgres_fdw didn't know about
it. Teach postgres_fdw how to fetch it.
Etsuro Fujita, with an additional test case by me.
Tom Lane [Thu, 25 Aug 2016 13:57:09 +0000 (09:57 -0400)]
Fix instability in parallel regression tests.
Commit f0c7b789a added a test case in case.sql that creates and then drops
both an '=' operator and the type it's for. Given the right timing, that
can cause a "cache lookup failed for type" failure in concurrent sessions,
which see the '=' operator as a potential match for '=' in a query, but
then the type is gone by the time they inquire into its properties.
It might be nice to make that behavior more robust someday, but as a
back-patchable solution, adjust the new test case so that the operator
is never visible to other sessions. Like the previous commit, back-patch
to all supported branches.
Tom Lane [Thu, 25 Aug 2016 02:20:01 +0000 (22:20 -0400)]
Fix small query-lifespan memory leak in bulk updates.
When there is an identifiable REPLICA IDENTITY index on the target table,
heap_update leaks the id_attrs bitmapset. That's not many bytes, but it
adds up over enough rows, since the code typically runs in a query-lifespan
context. Bug introduced in commit e55704d8b, which did a rather poor job
of cloning the existing use-pattern for RelationGetIndexAttrBitmap().
Per bug #14293 from Zhou Digoal. Back-patch to 9.4 where the bug was
introduced.
Tom Lane [Wed, 24 Aug 2016 18:37:50 +0000 (14:37 -0400)]
Fix improper repetition of previous results from a hashed aggregate.
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Noah Misch [Wed, 24 Aug 2016 03:40:38 +0000 (23:40 -0400)]
Build libpgfeutils before pg_isready.
Every program having -lpgfeutils in LDFLAGS must have this dependency,
whether or not the program uses a libpgfeutils symbol. Back-patch to
9.6, where libpgfeutils was introduced.
Tom Lane [Wed, 24 Aug 2016 03:21:10 +0000 (23:21 -0400)]
Suppress compiler warnings in non-cassert builds.
With Asserts off, these variables are set but never used, resulting
in warnings from pickier compilers. Fix that with our standard solution.
Per report from Jeff Janes.
Tom Lane [Tue, 23 Aug 2016 20:25:35 +0000 (16:25 -0400)]
Fix network_spgist.c build failures from missing AF_INET definition.
AF_INET is apparently defined in something that's pulled in automatically
on Linux, but the buildfarm says that's not true everywhere. Comparing
to network_gist.c suggests that including <sys/socket.h> ought to fix it,
and the POSIX standard concurs.
Tom Lane [Tue, 23 Aug 2016 19:16:21 +0000 (15:16 -0400)]
Create an SP-GiST opclass for inet/cidr.
This seems to offer significantly better search performance than the
existing GiST opclass for inet/cidr, at least on data with a wide mix
of network mask lengths. (That may suggest that the data splitting
heuristics in the GiST opclass could be improved.)
Emre Hasegeli, with mostly-cosmetic adjustments by me
Robert Haas [Tue, 23 Aug 2016 18:32:23 +0000 (14:32 -0400)]
Extend dsm API with a new function dsm_unpin_segment.
If you have previously pinned a segment and decide that you don't
actually want to keep it around until shutdown, this new API lets you
remove the pin. This is pretty trivial except on Windows, where it
requires closing the duplicate handle that was used to implement the
pin.
Thomas Munro and Amit Kapila, reviewed by Amit Kapila and by me.
Tom Lane [Tue, 23 Aug 2016 16:10:25 +0000 (12:10 -0400)]
Improve SP-GiST opclass API to better support unlabeled nodes.
Previously, the spgSplitTuple action could only create a new upper tuple
containing a single labeled node. This made it useless for opclasses
that prefer to work with fixed sets of nodes (labeled or otherwise),
which meant that restrictive prefixes could not be used with such
node definitions. Change the output field set for the choose() method
to allow it to specify any valid node set for the new upper tuple,
and to specify which of these nodes to place the modified lower tuple in.
In addition to its primary use for fixed node sets, this feature could
allow existing opclasses that use variable node sets to skip a separate
spgAddNode action when splitting a tuple, by setting up the node needed
for the incoming value as part of the spgSplitTuple action. However, care
would have to be taken to add the extra node only when it would not make
the tuple bigger than before. (spgAddNode can enlarge the tuple,
spgSplitTuple can't.)
This is a prerequisite for an upcoming SP-GiST inet opclass, but is
being committed separately to increase the visibility of the API change.
In passing, improve the documentation about the traverse-values feature
that was added by commit ccd6eb49a.
Emre Hasegeli, with cosmetic adjustments and documentation rework by me
Robert Haas [Tue, 23 Aug 2016 14:30:52 +0000 (10:30 -0400)]
Add txid_current_ifassigned().
Add a variant of txid_current() that returns NULL if no transaction ID
is assigned. This version can be used even on a standby server,
although it will always return NULL since no transaction IDs can be
assigned during recovery.
Craig Ringer, per suggestion from Jim Nasby. Reviewed by Petr Jelinek
and by me.
Tom Lane [Tue, 23 Aug 2016 13:39:54 +0000 (09:39 -0400)]
Refactor some network.c code to create cidr_set_masklen_internal().
Merge several copies of "copy an inet value and adjust the mask length"
code to create a single, conveniently C-callable function. This function
is exported for future use by inet SPGiST support, but it's good cleanup
anyway since we had three slightly-different-for-no-good-reason copies.
(Extracted from a larger patch, to separate new code from refactoring
of old code)
Robert Haas [Mon, 22 Aug 2016 19:22:11 +0000 (15:22 -0400)]
Fix possible sorting error when aborting use of abbreviated keys.
Due to an error in the abbreviated key abort logic, the most recently
processed SortTuple could be incorrectly marked NULL, resulting in an
incorrect final sort order.
In the worst case, this could result in a corrupt btree index, which
would need to be rebuild using REINDEX. However, abbrevation doesn't
abort very often, not all data types use it, and only one tuple would
end up in the wrong place, so the practical impact of this mistake may
be somewhat limited.
Peter Eisentraut [Mon, 22 Aug 2016 16:00:00 +0000 (12:00 -0400)]
Run select_parallel test by itself
Remove the plpgsql wrapping that hides the context. So now the test
will fail if the work doesn't actually happen in a parallel worker. Run
the test in its own test group to ensure it won't run out of resources
for that.
Noah Misch [Mon, 22 Aug 2016 02:05:57 +0000 (22:05 -0400)]
Retire escapeConnectionParameter().
It is redundant with appendConnStrVal(), which became an extern function
in commit 41f18f021a0882eccbeca62e2ed4b66c6b96e9c9. This changes the
handling of out-of-memory and of certain inputs for which quoting is
optional, but pg_basebackup has no need for unusual treatment thereof.
Tom Lane [Sat, 20 Aug 2016 19:05:25 +0000 (15:05 -0400)]
Make initdb's suggested "pg_ctl start" command line more reliable.
The original coding here was not nearly careful enough about quoting
special characters, and it didn't get corner cases right for constructing
the pg_ctl path either. Use join_path_components() and appendShellString()
to do it honestly, so that the string will more likely work if blindly
copied-and-pasted.
While at it, teach appendShellString() not to quote strings that clearly
don't need it, so that the output from initdb doesn't become uglier than
it was before in typical cases where quoting is not needed.
Ryan Murphy, reviewed by Michael Paquier and myself
Tom Lane [Fri, 19 Aug 2016 21:32:59 +0000 (17:32 -0400)]
Allow empty queries in pgbench.
This might have been too much of a foot-gun before 9.6, but with the
new commands-end-at-semicolons parsing rule, the only way to get an
empty query into a script is to explicitly write an extra ";".
So we may as well allow the case.
Tom Lane [Fri, 19 Aug 2016 21:13:47 +0000 (17:13 -0400)]
Use LEFT JOINs in some system views in case referenced row doesn't exist.
In particular, left join to pg_authid so that rows in pg_stat_activity
don't disappear if the session's owning user has been dropped.
Also convert a few joins to pg_database to left joins, in the same spirit,
though that case might be harder to hit. We were doing this in other
views already, so it was a bit inconsistent that these views didn't.
Oskari Saarenmaa, with some further tweaking by me
Tom Lane [Fri, 19 Aug 2016 18:35:32 +0000 (14:35 -0400)]
Guard against parallel-restricted functions in VALUES expressions.
Obvious brain fade in set_rel_consider_parallel(). Noticed it while
adjusting the adjacent RTE_FUNCTION case.
In 9.6, also make the code look more like what I just did in HEAD
by removing the unnecessary function_rte_parallel_ok subroutine
(it does nothing that expression_tree_walker wouldn't do).
Tom Lane [Fri, 19 Aug 2016 18:03:07 +0000 (14:03 -0400)]
Speed up planner's scanning for parallel-query hazards.
We need to scan the whole parse tree for parallel-unsafe functions.
If there are none, we'll later need to determine whether particular
subtrees contain any parallel-restricted functions. The previous coding
retained no knowledge from the first scan, even though this is very
wasteful in the common case where the query contains only parallel-safe
functions. We can bypass all of the later scans by remembering that fact.
This provides a small but measurable speed improvement when the case
applies, and shouldn't cost anything when it doesn't.
Alvaro Herrera [Fri, 19 Aug 2016 17:38:55 +0000 (14:38 -0300)]
reorderbuffer: preserve errno while reporting error
Clobbering errno during cleanup after an error is an oft-repeated, easy
to make mistake. Deal with it here as everywhere else, by saving it
aside and restoring after cleanup, before ereport'ing.
In passing, add a missing errcode declaration in another ereport() call
in the same file, which I noticed while skimming the file looking for
similar problems.
Tom Lane [Fri, 19 Aug 2016 17:31:10 +0000 (13:31 -0400)]
Clean up another pre-ANSI-C-ism in regex code: get rid of pcolor typedef.
pcolor was used to represent function arguments that are nominally of
type color, but when using a pre-ANSI C compiler would be passed as the
promoted integer type. We really don't need that anymore.
Tom Lane [Fri, 19 Aug 2016 16:51:02 +0000 (12:51 -0400)]
Remove typedef celt from the regex library, along with macro NOCELT.
The regex library used to have a notion of a "collating element" that was
distinct from a "character", but Henry Spencer never actually implemented
his planned support for multi-character collating elements, and the Tcl
crew ripped out most of the stubs for that years ago. The only thing left
that distinguished the "celt" typedef from the "chr" typedef was that
"celt" was supposed to also be able to hold the not-a-character "NOCELT"
value. However, NOCELT was not used anywhere after the MCCE stub removal
changes, which means there's no need for celt to be different from chr.
Removing the separate typedef simplifies matters and also removes a trap
for the unwary, in that celt is signed while chr may not be, so comparisons
could mean different things. There's no bug there today because we
restrict CHR_MAX to be less than INT_MAX, but I think there may have been
such bugs before we did that, and there could be again if anyone ever
decides to fool with the range of chr.
This patch also removes assorted unnecessary casts to "chr" of values
that are already chrs. Many of these seem to be leftover from days when
the code was compatible with pre-ANSI C.
Andres Freund [Fri, 19 Aug 2016 00:30:14 +0000 (17:30 -0700)]
Add alternative output for ON CONFLICT toast isolation test.
On some buildfarm animals the isolationtest added in 07ef0351 failed, as
the order in which processes are run after unlocking is not
guaranteed. Add an alternative output for that.
Discussion: <7969.1471484738@sss.pgh.pa.us>
Backpatch: 9.6, like the test in the aforementioned commit
Tom Lane [Thu, 18 Aug 2016 20:04:35 +0000 (16:04 -0400)]
Update line count totals for psql help displays.
As usual, we've been pretty awful about maintaining these counts.
They're not all that critical, perhaps, but let's get them right
at release time. Also fix 9.5, which I notice is just as bad.
It's probably wrong further back, but the lack of --help=foo
options before 9.5 makes it too painful to count.
Peter Eisentraut [Thu, 18 Aug 2016 16:00:00 +0000 (12:00 -0400)]
doc: Speed up XSLT builds
The upstream XSLT stylesheets use some very general XPath expressions in
some places that end up being very slow. We can optimize them with
knowledge about the DocBook document structure and our particular use
thereof. For example, when counting preceding chapters to get a number
for the current chapter, we only need to count preceding sibling
nodes (more or less) instead of searching through the entire node tree
for chapter elements.
This change attacks the slowest pieces as identified by xsltproc
--profile. This makes the HTML build roughly 10 times faster, resulting
in the new total build time being about the same as the old DSSSL-based
build. Some of the non-HTML build targets (especially FO) will also
benefit a bit, but they have not been specifically analyzed.
With this, also remove the pg.fast parameter, which was previously a
hack to get the build to a manageable speed.
Alexander Lakhin <a.lakhin@postgrespro.ru>, with some additional
tweaking by me
Tom Lane [Thu, 18 Aug 2016 15:17:10 +0000 (11:17 -0400)]
Improve psql's tab completion for ALTER EXTENSION foo UPDATE ...
Offer a list of available versions for that extension. Formerly, since
there was no special support for this, it triggered off the UPDATE
keyword and offered a list of table names --- not too helpful.
Peter Eisentraut [Tue, 16 Aug 2016 16:00:00 +0000 (12:00 -0400)]
Improve formatting of comments in plpgsql.h
This file had some unusual comment layout. Most of the comments
introducing structs ended up to the right of the screen and following
the start of the struct. Some comments for struct members ended up
after the member definition.
Fix that by moving comments consistently before what they are
describing. Also add missing struct tags where missing so that it is
easier to tell what the struct is.
Refactor RandomSalt to handle salts of different lengths.
All we need is 4 bytes at the moment, for MD5 authentication. But in
upcomint patches for SCRAM authentication, SCRAM will need a salt of
different length. It's less scary for the caller to pass the buffer
length anyway, than assume a certain-sized output buffer.
Author: Michael Paquier
Discussion: <CAB7nPqQvO4sxLFeS9D+NM3wpy08ieZdAj_6e117MQHZAfxBFsg@mail.gmail.com>
Magnus Hagander [Thu, 18 Aug 2016 10:32:42 +0000 (12:32 +0200)]
Update Windows timezone mapping from Windows 7 and 10
This adds a couple of new timezones that are present in the newer
versions of Windows. It also updates comments to reference UTC rather
than GMT, as this change has been made in Windows.
This way sendAuthRequest doesn't need to know the details of all the
different authentication methods. This is in preparation for adding SCRAM
authentication, which will add yet another authentication request message
type, with different payload.
Reviewed-By: Michael Paquier
Discussion: <CAB7nPqQvO4sxLFeS9D+NM3wpy08ieZdAj_6e117MQHZAfxBFsg@mail.gmail.com>
Andres Freund [Thu, 18 Aug 2016 00:03:36 +0000 (17:03 -0700)]
Fix deletion of speculatively inserted TOAST on conflict
INSERT .. ON CONFLICT runs a pre-check of the possible conflicting
constraints before performing the actual speculative insertion. In case
the inserted tuple included TOASTed columns the ON CONFLICT condition
would be handled correctly in case the conflict was caught by the
pre-check, but if two transactions entered the speculative insertion
phase at the same time, one would have to re-try, and the code for
aborting a speculative insertion did not handle deleting the
speculatively inserted TOAST datums correctly.
TOAST deletion would fail with "ERROR: attempted to delete invisible
tuple" as we attempted to remove the TOAST tuples using
simple_heap_delete which reasoned that the given tuples should not be
visible to the command that wrote them.
This commit updates the heap_abort_speculative() function which aborts
the conflicting tuple to use itself, via toast_delete, for deleting
associated TOAST datums. Like before, the inserted toast rows are not
marked as being speculative.
This commit also adds a isolationtester spec test, exercising the
relevant code path. Unfortunately 9.5 cannot handle two waiting
sessions, and thus cannot execute this test.
Reported-By: Viren Negi, Oskari Saarenmaa
Author: Oskari Saarenmaa, edited a bit by me
Bug: #14150
Discussion: <20160519123338.12513.20271@wrigleys.postgresql.org>
Backpatch: 9.5, where ON CONFLICT was introduced
Tom Lane [Wed, 17 Aug 2016 22:32:56 +0000 (18:32 -0400)]
Implement regexp_match(), a simplified alternative to regexp_matches().
regexp_match() is like regexp_matches(), but it disallows the 'g' flag
and in consequence does not need to return a set. Instead, it returns
a simple text array value, or NULL if there's no match. Previously people
usually got that behavior with a sub-select, but this way is considerably
more efficient.
Documentation adjusted so that regexp_match() is presented first and then
regexp_matches() is introduced as a more complicated version. This is
a bit historically revisionist but seems pedagogically better.
Still TODO: extend contrib/citext to support this function.
Andres Freund [Wed, 17 Aug 2016 20:15:03 +0000 (13:15 -0700)]
Properly re-initialize replication slot shared memory upon creation.
Slot creation did not clear all fields upon creation. After start the
memory is zeroed, but when a physical replication slot was created in
the shared memory of a previously existing logical slot, catalog_xmin
would not be cleared. That in turn would prevent vacuum from doing its
duties.
To fix initialize all the fields. To make similar future bugs less
likely, zero all of ReplicationSlotPersistentData, and re-order the
rest of the initialization to be in struct member order.
Analysis: Andrew Gierth Reported-By: md@chewy.com
Author: Michael Paquier
Discussion: <20160705173502.1398.70934@wrigleys.postgresql.org>
Backpatch: 9.4, where replication slots were introduced
Tom Lane [Wed, 17 Aug 2016 19:51:10 +0000 (15:51 -0400)]
Fix -e option in contrib/intarray/bench/bench.pl.
As implemented, -e ran an EXPLAIN but then discarded the output, which
certainly seems pointless. Make it print to stdout instead. It's been
like that forever, so back-patch to all supported branches.
Tom Lane [Wed, 17 Aug 2016 18:51:10 +0000 (14:51 -0400)]
Improve plpgsql's memory management to fix some function-lifespan leaks.
In some cases, exiting out of a plpgsql statement due to an error, then
catching the error in a surrounding exception block, led to leakage of
temporary data the statement was working with, because we kept all such
data in the function-lifespan SPI Proc context. Iterating such behavior
many times within one function call thus led to noticeable memory bloat.
To fix, create an additional memory context meant to have statement
lifespan. Since many plpgsql statements, particularly the simpler/more
common ones, don't need this, create it only on demand. Reset this context
at the end of any statement that uses it, and arrange for exception cleanup
to reset it too, thereby fixing the memory-leak issue. Allow a stack of
such contexts to exist to handle cases where a compound statement needs
statement-lifespan data that persists across calls of inner statements.
While at it, clean up code and improve comments referring to the existing
short-term memory context, which by plpgsql convention is the per-tuple
context of the eval_econtext ExprContext. We now uniformly refer to that
as the eval_mcontext, whereas the new statement-lifespan memory contexts
are called stmt_mcontext.
This change adds some context-creation overhead, but on the other hand
it allows removal of some retail pfree's in favor of context resets.
On balance it seems to be about a wash performance-wise.
In principle this is a bug fix, but it seems too invasive for a back-patch,
and the infrequency of complaints weighs against taking the risk in the
back branches. So we'll fix it only in HEAD, at least for now.
Magnus Hagander [Wed, 17 Aug 2016 08:39:22 +0000 (10:39 +0200)]
Disable update_process_title by default on Windows
The performance overhead of this can be significant on Windows, and most
people don't have the tools to view it anyway as Windows does not have
native support for process titles.
Tom Lane [Wed, 17 Aug 2016 00:33:01 +0000 (20:33 -0400)]
Improve parsetree representation of special functions such as CURRENT_DATE.
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Tom Lane [Tue, 16 Aug 2016 19:58:30 +0000 (15:58 -0400)]
Fix assorted places in psql to print version numbers >= 10 in new style.
This is somewhat cosmetic, since as long as you know what you are looking
at, "10.0" is a serviceable substitute for "10". But there is a potential
for confusion between version numbers with minor numbers and those without
--- we don't want people asking "why is psql saying 10.0 when my server is
10.2". Therefore, back-patch as far as practical, which turns out to be
9.3. I could have redone the patch to use fprintf(stderr) in place of
psql_error(), but it seems more work than is warranted for branches that
will be EOL or nearly so by the time v10 comes out.
Although only psql seems to contain any code that needs this, I chose
to put the support function into fe_utils, since it seems likely we'll
need it in other client programs in future. (In 9.3-9.5, use dumputils.c,
the predecessor of fe_utils/string_utils.c.)
In HEAD, also fix the backend code that whines about loadable-library
version mismatch. I don't see much need to back-patch that.
Tom Lane [Tue, 16 Aug 2016 17:58:44 +0000 (13:58 -0400)]
Automate the maintenance of SO_MINOR_VERSION for our shared libraries.
Up to now we've manually adjusted these numbers in several different
Makefiles at the start of each development cycle. While that's not
much work, it's easily forgotten, so let's get rid of it by setting
the SO_MINOR_VERSION values directly from $(MAJORVERSION).
In the case of libpq, this dev cycle's value of SO_MINOR_VERSION happens
to be "10" anyway, so this switch is transparent. For ecpg's shared
libraries, this will result in skipping one or two minor version numbers
between v9.6 and v10, which seems like no big problem; and it was a bit
inconsistent that they didn't have equal minor version numbers anyway.
Robert Haas [Tue, 16 Aug 2016 17:23:32 +0000 (13:23 -0400)]
Fix possible crash due to incorrect allocation context.
Commit af33039317ddc4a0e38a02e2255c2bf453115fd2 aimed to reduce
leakage from tqueue.c, which is good. Unfortunately, by changing the
memory context in which all of gather_readnext() executes, it also
changed the context in which ExecShutdownGatherWorkers executes, which
is not good, because that function eventually causes a call to
ExecParallelRetrieveInstrumentation, which proceeds to allocate
planstate->worker_instrument in a short-lived context, causing a
crash.
Rushabh Lathia, reviewed by Amit Kapila and by me.
Tom Lane [Tue, 16 Aug 2016 16:49:30 +0000 (12:49 -0400)]
Remove separate version numbering for ecpg preprocessor.
Once upon a time, it made sense for the ecpg preprocessor to have its
own version number, because it used a manually-maintained grammar that
wasn't always in sync with the core grammar. But those days are
thankfully long gone, leaving only a maintenance nuisance behind.
Let's use the PG v10 version numbering changeover as an excuse to get
rid of the ecpg version number and just have ecpg identify itself by
PG_VERSION. From the user's standpoint, ecpg will go from "4.12" in
the 9.6 branch to "10" in the 10 branch, so there's no failure of
monotonicity.
Robert Haas [Mon, 15 Aug 2016 22:09:55 +0000 (18:09 -0400)]
Once again allow LWLocks to be used within DSM segments.
Prior to commit 7882c3b0b95640e361f1533fe0f2d02e4e5d8610, it was
possible to use LWLocks within DSM segments, but that commit broke
this use case by switching from a doubly linked list to a circular
linked list. Switch back, using a new bit of general infrastructure
for maintaining lists of PGPROCs.
Tom Lane [Mon, 15 Aug 2016 17:49:49 +0000 (13:49 -0400)]
Stamp HEAD as 10devel.
This is a good bit more complicated than the average new-version stamping
commit, because it includes various adjustments in pursuit of changing
from three-part to two-part version numbers. It's likely some further
work will be needed around that change; but this is enough to get through
the regression tests, at least in Unix builds.
Tom Lane [Mon, 15 Aug 2016 15:32:09 +0000 (11:32 -0400)]
Simplify the process of perltidy'ing our Perl files.
Wrap the perltidy invocation into a shell script to reduce the risk of
copy-and-paste errors. Include removal of *.bak files in the script,
so they don't accidentally get committed. Improve the directions in
the README file.
Tom Lane [Sun, 14 Aug 2016 19:06:01 +0000 (15:06 -0400)]
Remove bogus dependencies on NUMERIC_MAX_PRECISION.
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Tom Lane [Sun, 14 Aug 2016 02:24:48 +0000 (22:24 -0400)]
Fix assorted bugs in contrib/bloom.
In blinsert(), cope with the possibility that a page we pull from the
notFullPage list is marked BLOOM_DELETED. This could happen if VACUUM
recently marked it deleted but hasn't (yet) updated the metapage.
We can re-use such a page safely, but we *must* reinitialize it so that
it's no longer marked deleted.
Fix blvacuum() so that it updates the notFullPage list even if it's
going to update it to empty. The previous "optimization" of skipping
the update seems pretty dubious, since it means that the next blinsert()
will uselessly visit whatever pages we left in the list.
Uniformly treat PageIsNew pages the same as deleted pages. This should
allow proper recovery if a crash occurs just after relation extension.
Properly use vacuum_delay_point, not assorted ad-hoc CHECK_FOR_INTERRUPTS
calls, in the blvacuum() main loop.
Fix broken tuple-counting logic: blvacuum.c counted the number of live
index tuples over again in each scan, leading to VACUUM VERBOSE reporting
some multiple of the actual number of surviving index tuples after any
vacuum that removed any tuples (since they'd be counted in blvacuum, maybe
more than once, and then again in blvacuumcleanup, without ever zeroing the
counter). It's sufficient to count them in blvacuumcleanup.
stats->estimated_count is a boolean, not a counter, and we don't want
to set it true, so don't add tuple counts to it.
Add a couple of Asserts that we don't overrun available space on a bloom
page. I don't think there's any bug there today, but the way the
FreeBlockNumberArray size calculation is set up is scarily fragile, and
BloomPageGetFreeSpace isn't much better. The Asserts should help catch
any future mistakes.
Per investigation of a report from Jeff Janes. I think the first item
above may explain his report; the other changes were things I noticed
while casting about for an explanation.
Tom Lane [Sat, 13 Aug 2016 22:31:14 +0000 (18:31 -0400)]
Add SQL-accessible functions for inspecting index AM properties.
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit 65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Tom Lane [Fri, 12 Aug 2016 22:45:18 +0000 (18:45 -0400)]
Doc: clarify that DROP ... CASCADE is recursive.
Apparently that's not obvious to everybody, so let's belabor the point.
In passing, document that DROP POLICY has CASCADE/RESTRICT options (which
it does, per gram.y) but they do nothing (I assume, anyway). Also update
some long-obsolete commentary in gram.y.
Tom Lane [Fri, 12 Aug 2016 16:13:04 +0000 (12:13 -0400)]
Fix inappropriate printing of never-measured times in EXPLAIN.
EXPLAIN (ANALYZE, TIMING OFF) would print an elapsed time of zero for
a trigger function, because no measurement has been taken but it printed
the field anyway. This isn't what EXPLAIN does elsewhere, so suppress it.
In the same vein, EXPLAIN (ANALYZE, BUFFERS) with non-text output format
would print buffer I/O timing numbers even when no measurement has been
taken because track_io_timing is off. That seems not per policy, either,
so change it.
Back-patch to 9.2 where these features were introduced.
Tom Lane [Thu, 11 Aug 2016 15:22:25 +0000 (11:22 -0400)]
Fix busted Assert for CREATE MATVIEW ... WITH NO DATA.
Commit 874fe3aea changed the command tag returned for CREATE MATVIEW/CREATE
TABLE AS ... WITH NO DATA, but missed that there was code in spi.c that
expected the command tag to always be "SELECT". Fortunately, the
consequence was only an Assert failure, so this oversight should have no
impact in production builds.
Since this code path was evidently un-exercised, add a regression test.
Per report from Shivam Saxena. Back-patch to 9.3, like the previous commit.
projects / postgresql / log