Linfeng Zhang [Thu, 22 Mar 2018 01:00:40 +0000 (18:00 -0700)]
Fix a strict-overflow warning
Compiler -- gcc (Debian 7.3.0-5) 7.3.0
./libvpx/vp9/encoder/vp9_denoiser.c:374:9: assuming signed overflow
does not occur when assuming that (X + c) < X is always false
[-Wstrict-overflow]
for (j = 0; j < xmis; j++) {
Jerome Jiang [Tue, 20 Mar 2018 18:12:16 +0000 (11:12 -0700)]
VP9 SVC: Add control to disable inter layer prediction.
Add VP9E_SET_SVC_INTER_LAYER_PRED to disable inter layer (spatial)
prediction.
0: prediction on
1: prediction off for all frames
2: prediction off for non key frames
Marco Paniconi [Mon, 19 Mar 2018 03:46:30 +0000 (20:46 -0700)]
vp9-svc: Improve frame dropper for spatial layers.
SVC frame dropper: modify the logic to allow for individual
spatial layers to drop. This removes the constraint that all
upper spatial layers must drop when a given spatial layer drops.
Add a flag to the pkt to indicate whether a spatial layer is
encoded or dropped. This is needed for applications that enable
this feature (frame dropping for SVC).
For a current spatial layer, if its previous spatial layer is
dropped, then disable certain features for that layer:
inter-layer prediction, base_mv, partition_reuse, copy partition.
Also add the constraint to never drop a spatial layer if its
base layer is a key frame.
Updates to sample encoder (vp9_spatial_svc_encoder) and the
SVC datarate unittests to properly handle frame dropping.
Bump up ABI version.
Change-Id: I7d14ccf67b8d014a7abfce5ba3989fc623e94067
James Zern [Sat, 17 Mar 2018 00:47:56 +0000 (17:47 -0700)]
CopyFrameTest: reduce max size for 32-bit targets
avoids potential OOM when allocating 3 buffers for 16383x16383; 3840 is
used as a replacement
this test was missed in: 215bddf32 vpx_scale_test: reduce max size for 32-bit targets
Marco Paniconi [Wed, 14 Mar 2018 17:03:31 +0000 (10:03 -0700)]
vp9-svc: Frame dropper for SVC.
If a given spatial layer decides to drop, due to the
buffer/overshoot conditions for that layer, then drop
that current spatial layer and all spatial layers above.
In the current implementation the svc frame counter
(and hence the pattern for the non-flexible SVC case)
are updated on frame drops.
Also add last spatial layer encoded to the pkt.
This is useful for RTC applications that enable
frame dropping for SVC.
Update to the SVC datarate tests:
enabled frame dropper on all SVC datarate tests, and
made a fix to properly set the temporal_layer_id, which
works now even on frame drops.
Reason for revert:
this should be investigated further to ensure the memset is really
necessary outside of the static analysis pass.
Original change's description:
> vp9_loopfilter.c: zero lfl_uv
>
> The initialization depends on cm and mi_row which static
> analysis does not approve of.
>
> Clears a static analysis warning:
> warning: The right operand of '+' is a garbage value
> const loop_filter_thresh *lfi = lfthr + *lfl;
>
> Change-Id: I8c863ced2b1e9a7e10103b7281098f20941a6ca2
Marco Paniconi [Thu, 15 Mar 2018 00:00:27 +0000 (17:00 -0700)]
vp9-svc: Bugfix to dyanmic enabling/disabling of layers.
Fix a bug when middle and top spatial layer are skip encoded
(disabled) and then re-enabled again, during the sequence.
Issue is that pending_frame_count in the packing may
be incremented on middle layer, even though that layer is skipped
(not encoded and hence zero size). Fix is to add size check.
Clears static analysis warnings similar to the low bitdepth version:
commit c4367b9b51782969d3b37ead6694d19ef9bfb58c
Author: James Zern <jzern@google.com>
Date: Wed Mar 18 14:34:30 2015 -0700
vp9_resize_plane: quiet some static analysis warnings
Johann [Wed, 14 Mar 2018 20:25:05 +0000 (13:25 -0700)]
vp8 rdopt.c: zero rd.[rate_uv|distortion_uv]
These values are not consistently set before calling update_best_mode.
In vp9_rdopt.c they are individual values instead of a struct and are
zero'd at declaration.
Clears a static analysis warning:
warning: The right operand of '-' is a garbage value
RDCOST(x->rdmult, x->rddiv, (rd->rate2 - rd->rate_uv - other_cost),
warning: The right operand of '-' is a garbage value
(rd->distortion2 - rd->distortion_uv));
Johann [Wed, 14 Mar 2018 20:10:08 +0000 (13:10 -0700)]
vp8 mfqe: zero map[]
The loop appears to set map[i] with the intention of running
the 'j' loop up to that point. However, without zero'ing map[]
first the behavior is unpredictable.
Fixes a static analysis warning:
warning: Branch condition evaluates to a garbage value
for (j = 0; j < 4 && map[j]; ++j) {
Johann [Wed, 14 Mar 2018 01:31:26 +0000 (18:31 -0700)]
spatial svc: set window_size to 15
Static analysis does not recognize that output_rc_stat guards
the usage of window_size. Clears this warning:
The right operand of '>' is a garbage value
if (frame_cnt > (unsigned int)rc.window_size) {
set_rate_control_stats sets window_size to 15. Zeroing it
just introduces another static analysis warning.
Johann [Wed, 14 Mar 2018 01:22:40 +0000 (18:22 -0700)]
spatial svc: zero sizes
This should be taken care of by parse_superframe_index but
the static analysis is not recognizing it because it depends
on 'marker' which is read from the bitstream.
Clears a static analysis warning:
The right operand of '*' is a garbage value
rc.layer_encoding_bitrate[layer] += 8.0 * sizes[sl];
Marco Paniconi [Thu, 1 Mar 2018 17:45:11 +0000 (09:45 -0800)]
vp9-svc: Fix to downsampling filter phase_shift.
Set phase_shift = 0 if the scale factors are
above 3/4. Removes artifact for scale factors
close to 1.
phase_shift = 8 is to get an averaging filter
(decimated pixel aligns to 8/16, midway between source pixels),
and only makes sense for scale factors multiples of
2 (1/2, 1/4,...).
paulwilkins [Wed, 21 Feb 2018 11:18:09 +0000 (11:18 +0000)]
Change to KF frame boost calculation.
This change is targeted mainly at higher resolutions where typically
the average error per MB is much smaller. hence this patch replaces
a fixed error per MB factor with a tiered value.
It also adds in a fixed offset value that acts as a minimum return score.
Note also minor fix to debug stats output.
The results are overall beneficial (-ve) on our test sets, most notably for
higher definition formats (see below - overall psnr, ssim, psnr hvs)
The most notable negative case is pierseaside 2K which appears to be worse by
8-10% (which has a big impact on the overall gain for the NF 2K set). Closer
inspection reveals that the drop does not relate to the key frame boost
per se as in both cases the key frame substantially undershoots its target. Rather
this is a side effect relating to the initial Q range allowed for the key frame and
a poor initial complexity estimate. This will hopefully be improved in a later
patch.
Kyle Siefring [Mon, 5 Feb 2018 05:15:29 +0000 (00:15 -0500)]
Fold adds in 16->32-bit converts in SSE2/AVX2 fDCT
Changes in the function size in bytes (in lieu of performance metrics)
Before After Diff
vpx_fdct32x32_avx2 29564 -> 28334 -1230
vpx_fdct32x32_sse2 38053 -> 36309 -1744
Jerome Jiang [Mon, 29 Jan 2018 18:14:40 +0000 (10:14 -0800)]
Reland "Add ROI support for VP9."
Extended ROI struct suitable for VP9.
ROI input from user is passed into internal struct and applied on every frame
(except key frame).
Enabled usage of all 4 VP9 segment features (delta_qp, delta_lf, skip,
ref_frame) via the ROI map input.
Made changes to nonrd_pickmode for the ref_frame feature.
Only works for realtime speed >= 5.
AQ_MODE needs to be turned off for ROI to take effect.
Change example in the sample encoder: vpx_temporal_svc_encoder.c to be suitable
for VP9.
Add datarate test.
Original change's description:
> Add ROI support for VP9.
>
> Extended ROI struct suitable for VP9.
> ROI input from user is passed into internal struct and applied on every frame
> (except key frame).
>
> Enabled usage of all 4 VP9 segment features (delta_qp, delta_lf, skip,
> ref_frame) via the ROI map input.
> Made changes to nonrd_pickmode for the ref_frame feature.
>
> Only works for realtime speed >= 5.
> AQ_MODE needs to be turned off for ROI to take effect.
>
> Change example in the sample encoder: vpx_temporal_svc_encoder.c to be suitable
> for VP9.
> Add datarate test.
>
> Bump up ABI version.
>
> BUG=webm:1470
>
> Change-Id: I7e0cf6890649adb98a5fda2efb6ae1fa511c7fc9
paulwilkins [Wed, 31 Jan 2018 16:42:37 +0000 (16:42 +0000)]
Improved coding on slide show content.
This patch adds in detection of slide show key frame groups.
The detection assumes extremely low or 0 motion for all frames
in the key frame group.
If this case is detected the boost level is set to a very high value
and the min Q to a lower value for the key frame itself.
Alt refs and golden frames are disabled to save bits (up to a limiting
maximum interval currently set to 240 frames).
In test samples that I created, this patch gave rise to a substantial
improvement in overall psnr and a drop in data rate. In some cases the
average psnr fell, however, with the boost and minQ values set as they are.
This is to be expected because previously a relatively poor key frame
could be followed by progressively better alt refs. For example a key
frame at q7.5 but subsequent alt refs improving it to lossless. Given that
average psnr tends to be dominated by the best frames, a ramp like this
from q7.5 to lossless may give a better average psnr than, for example,
coding the entire sequence at q2.5. Overall psnr, however, will be much
better in the latter case. The option exists to boost the key frame further
which would insure much better results for all metrics, but at the expense
of smaller bitrate savings. Given that these samples tend to have very
good quality anyway this seems like a bad trade off.
For slides displayed for several seconds, bitrate savings of >= 20% are likely
and much larger gains are possible in some cases.
Marco [Mon, 29 Jan 2018 18:14:40 +0000 (10:14 -0800)]
Add ROI support for VP9.
Extended ROI struct suitable for VP9.
ROI input from user is passed into internal struct and applied on every frame
(except key frame).
Enabled usage of all 4 VP9 segment features (delta_qp, delta_lf, skip,
ref_frame) via the ROI map input.
Made changes to nonrd_pickmode for the ref_frame feature.
Only works for realtime speed >= 5.
AQ_MODE needs to be turned off for ROI to take effect.
Change example in the sample encoder: vpx_temporal_svc_encoder.c to be suitable
for VP9.
Add datarate test.
paulwilkins [Wed, 7 Feb 2018 15:05:20 +0000 (15:05 +0000)]
Adjust MAXRATE_1080P.
This value was originally set in response to requests from the hardware
team before levels were properly defined for VP9.
Even if a level is not specified for an encode, it imposes a maximum
frame size for videos of dimensions <= 1080P. For larger formats the
limit was set at 250 bits per MB.
This patch modifies the limit to be more in line with the requirements
specified for level 4 (max rate for a 4 frame group of 16 Mbits). If a lower
level is specified at encode time and this mandates a smaller maximum frame
size then the level requirement will still take precedence.
Increasing this value allows for some slide shows or very low motion clips
to code a better quality key frame.
projects / libvpx / log