remove md array: it is not used any more.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2679)

Removed ugly size_t less than zero check.

CLA: trivial.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2674)

Ensure minsize >= sizeof(SH_LIST)

The sh_add_to_list function will overwrite subsequent slots in the free list
for small allocations.  This causes a segmentation fault if the writes goes
off the end of the secure memory.  I've not investigated if this problem
can overwrite memory without the segmentation fault, but it seems likely.

This fix limits the minsize to the sizeof of the SH_LIST structure (which
also has a side effect of properly aligning the pointers).

The alternative would be to return an error if minsize is too small.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2657)

fix spelling of Camellia in comment

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)

Implementation of the ARIA cipher as described in RFC 5794.

This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)

Added '-nameopt' option to the verify command.

It makes possible to print the certificate's DN correctly in case of verification errors.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2656)

Don't call memcpy if len is zero.

Prevent undefined behavior in CRYPTO_cbc128_encrypt: calling this function
with the 'len' parameter being 0 would result in a memcpy where the source
and destination parameters are the same, which is undefined behavior.
Do same for AES_ige_encrypt.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2671)

Revert "Use memcmp() instead of CRYPTO_memcmp() when fuzzing"

This reverts commit 3aad8e18707bccaabee5f111de2db0696b45781c.

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #2686

.travis.yml: remove osx from build matrix.

Travis OS X utilization and backlog statistics suggest that it became
bottleneck for our integration builds with requests piling up for days
during working days of the week. Suggestion is to remove osx till
capacity is lesser issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Use memcmp() instead of CRYPTO_memcmp() when fuzzing

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #2633

Internal siphash tests are not run.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2649)

VMS fix of test/recipes/80-test_ssl_new.t

On VMS, file names with more than one period get all but the last get
escaped with a ^, so 21-key-update.conf.in becomes 21-key-update^.conf.in
That means that %conf_dependent_tests and %skip become useless unless
we massage the file names that are used as indexes.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2678)

Fix no-dh and no-dsa

Since 20-cert-select.conf will vary depending in no-dh and no-dsa,
don't check it against original when those options are selected

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2680)

If all versions of a proto are disabled, disabled the proto as well

For example, 'no-dtls1 no-dtls1_2' will imply 'no-dtls'

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2670)

test/README: clarify last test number group

Reviewed-by: Richard Levitte <levitte@openssl.org>

Explicitly disallow DSA for TLS 1.3

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2667)

add DSA cert tests

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2667)

Add DH parameters, DSA cert and key

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2667)

Add DSA support to mkcert.sh

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2667)

Add and use function test_pem to work out test filenames.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2667)

Fix a slightly confusing if condition in a2i_ASN1_INTEGER.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2640)

Fix a merge error

Fix an error code clash due to a merge

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2665)

Fix test_x509_store

Don't run this test unless 'openssl rehash' works properly.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2664)

Fix symbol shadow

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2663)

Updates following review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Don't use an enum in the return type for a public API function

We use an int instead. That means SSL_key_update() also should use an int.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add some KeyUpdate tests

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add documentation for SSL_key_update() and SSL_get_key_update_type()

This also adds documentation for the pre-existing and related
SSL_renegotiate*() functions.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Fix a shadowed global variable warning

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Updates following review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Limit the number of KeyUpdate messages we can process

Too many KeyUpdate message could be inicative of a problem (e.g. an
infinite KeyUpdate loop if the peer always responds to a KeyUpdate message
with an "update_requested" KeyUpdate response), or (conceivably) an attack.
Either way we limit the number of KeyUpdate messages we are prepared to
handle.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Actually update the keys when a KeyUpdate message is sent or received

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

If we receive an "update_requested" KeyUpdate then respond with a KeyUpdate

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add the ability for a server to receive a KeyUpdate message

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add the ability for s_client to send a KeyUpdate message

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add a SSL_get_key_update_type() function

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add the ability for a client to send a KeyUpdate message

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add the ability for a client to receive a KeyUpdate message

This just receives the message. It doesn't actually update any keys yet.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add SSL_trace() support for KeyUpdate messages

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Add a capability to s_server to send KeyUpdate messages

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Provide a function to send a KeyUpdate message

This implements the server side KeyUpdate sending capability as well.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)

Fix typo in x86_64-mont5.pl CFI directives

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2655)

Add a test of the X509_STORE / X509_LOOKUP API

Fortunately, "openssl verify" makes good use of that API

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2652)

test/README: clarify test number groups

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2652)

Fix a mem leak in ssl_test_ctx.c

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2650)

Add client auth TLS 1.3 certificate selection tests

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)

Add ECDSA client certificates

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)

Use tls_choose_sigalg for client auth.

For client auth call tls_choose_sigalg to select the certificate
and signature algorithm. Use the selected algorithm in
tls_construct_cert_verify.

Remove obsolete tls12_get_sigandhash.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)

Add client side support to tls_choose_sigalg.

Select appropriate signature algorithm and certificate for client
authentication using tls_choose_sigalg.

A lot of selection logic is very similar except not finding a
certificate is not a fatal error: we just do not present a
certificate.

For TLS 1.2 and earlier we only check the current certificate
is suitable (for compatibility with previous logic) for TLS 1.3
(where there are no compatibility issues) we support multiple
client certificates for different algorithms.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)

Change req_check_len error message, it also accepts 20 bytes, but states 'less than' in the error message

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2648)

Use _WIN32 over WIN32 for preprocessor conditional

The intent seems to be that the WIN32 symbol is for things that are a direct
byproduct of being a windows-variant configuration and should be used for
feature en/disablement on windows systems.  Use of the _WIN32 symbol is more
widespread, being used to implement platform portability of more generic code.

We do define WIN32 in some situations in e_os.h, but that is not included
universally.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2642)

Update CHANGES and NEWS for new release

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove an OPENSSL_assert() and replace with a soft assert and check

Following on from CVE-2017-3733, this removes the OPENSSL_assert() check
that failed and replaces it with a soft assert, and an explicit check of
value with an error return if it fails.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't change the state of the ETM flags until CCS processing

In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.

The problem is caused by changing the flag indicating whether to use ETM
or not immediately on negotiation of ETM, rather than at CCS. Therefore,
during a renegotiation, if the ETM state is changing (usually due to a
change of ciphersuite), then an error/crash will occur.

Due to the fact that there are separate CCS messages for read and write
we actually now need two flags to determine whether to use ETM or not.

CVE-2017-3733

Reviewed-by: Richard Levitte <levitte@openssl.org>

Provide a test for the Encrypt-Then-Mac renegotiation crash

In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.

This commit provides a test for the issue.

CVE-2017-3733

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix warning

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2644)

Handle negative reply for NNTP STARTTLS in s_client

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2629)

Properly zero cipher_data for ChaCha20-Poly1305 on cleanup

Fix a typo. Probably this has not been found because EVP_CIPHER_CTX is
smaller than EVP_CHACHA_AEAD_CTX and heap overflow does not occur.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2294)

crypto/armcap.c: short-circuit processor capability probe in iOS builds.

Capability probing by catching SIGILL appears to be problematic
on iOS. But since Apple universe is "monocultural", it's actually
possible to simply set pre-defined processor capability mask.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2617)

ARMv4 assembly pack: harmonize Thumb-ification of iOS build.

Three modules were left behind in a285992763f3961f69a8d86bf7dfff020a08cef9.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2617)

Set current certificate to selected certificate.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2637)

sha/asm/*-x86_64.pl: add CFI annotations.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Rework error handling of custom_ext_meth_add towards strong exception safety.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2636)

Fix merge issue

Causes make update to fail.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2634)

Skip curve check if sigalg doesn't specify a curve.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)

Use CERT_PKEY pointer instead of index

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)

Simplify tls_construct_server_key_exchange

Use negotiated signature algorithm and certificate index in
tls_construct_key_exchange instead of recalculating it.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)

Use cert_index and sigalg

Now the certificate and signature algorithm is set in one place we
can use it directly insetad of recalculating it. The old functions
ssl_get_server_send_pkey() and ssl_get_server_cert_index() are no
longer required.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)

Add sigalg for earlier TLS versions

Update tls_choose_sigalg to choose a signature algorithm for all
versions of TLS not just 1.3.

For TLS 1.2 we choose the highest preference signature algorithm
for the chosen ciphersuite.

For TLS 1.1 and earlier the signature algorithm is determined by
the ciphersuite alone. For RSA we use a special MD5+SHA1 signature
algorithm.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)

Change tls_choose_sigalg so it can set errors and alerts.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)

add ssl_has_cert

Add inline function ssl_has_cert which checks to see if a certificate and
private key for a given index are not NULL.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)

Fix a few typos
[skip ci]

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2571)

Remove obsolete comment

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1613)

Prevents that OPENSSL_gmtime incorrectly signals success if gmtime_r fails, and that struct* tm result's possibly uninitialized content is used

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1613)

Use TLSEXT_KEYNAME_LENGTH in tls_decrypt_ticket.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2618)

Prevent allocations of size 0 in sh_init, which are not possible with the default OPENSSL_zalloc, but are possible if the user has installed their own allocator using CRYPTO_set_mem_functions. If the 0-allocations succeeds, the secure heap code will later access (at least) the first byte of that space, which is technically an OOB access. This could lead to problems with some custom allocators that only return a valid pointer for subsequent free()-ing, and do not expect that the pointer is actually dereferenced.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2605)

Add Sieve support (RFC 5804) to s_client ("-starttls sieve")

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2300)

Add no-ec build

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2626)

Make -xcert work again.

When a certificate is prepended update the list pointer.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2628)

Fix no-ec compilation

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2624)

Remove a double call to ssl3_send_alert()

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Fix a bogus uninit variable warning

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Add a bytestogroup macro

For converting the 2 byte group id into an unsigned int.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Various style fixes following review feedback

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Update the tls13messages test to add some HRR scenarios

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Update the kex modes tests to check various HRR scenarios

Make sure we get an HRR in the right circumstances based on kex mode.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Update TLSProxy to know about HelloRetryRequest messages

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Update test counting in checkhandshake.pm

Previously counting the number of tests in checkhandshake.pm took an
initial guess and then modified it based on various known special
cases. That is becoming increasingly untenable, so this changes it to
properly calculate the number of tests we expect to run.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Update the key_share tests for HelloRetryRequest

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Add trace support for HelloRetryRequest

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Implement support for resumption with a HelloRetryRequest

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Add client side support for parsing Hello Retry Request

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Add server side support for creating the Hello Retry Request message

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

Make the context available to the extensions parse and construction funcs

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)

mem leak on error path and error propagation fix

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2559)

aes/asm/*-x86_64.pl: add CFI annotations.

Reviewed-by: Rich Salz <rsalz@openssl.org>

perlasm/x86_64-xlate.pl: recognize even offset(%reg) in cfa_expression.

This is handy when "offset(%reg)" is a perl variable.

Reviewed-by: Rich Salz <rsalz@openssl.org>

ec/asm/ecp_nistz256-x86_64.pl: add CFI directives.

Reviewed-by: Rich Salz <rsalz@openssl.org>

ec/asm/ecp_nistz256-x86_64.pl: fix typo-bug in Win64 SE handler.

Thanks to Jun Sun for spotting this.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Further improvements to ASYNC_WAIT_CTX_clear_fd

Remove call to cleanup function
Use only one loop to find previous element

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2581)