Craig Topper [Fri, 23 Aug 2019 19:52:24 +0000 (19:52 +0000)]
[X86] Move a transform out of combineConcatVectorOps so we don't prematurely turn CONCAT_VECTORS into INSERT_SUBVECTORS.
CONCAT_VECTORS and INSERT_SUBVECTORS can both call combineConcatVectorOps,
but we shouldn't produce INSERT_SUBVECTORS from there. We should
keep CONCAT_VECTORS until vector legalization.
Noticed while looking at the madd_quad_reduction test from madd.ll
Wei Mi [Fri, 23 Aug 2019 19:05:30 +0000 (19:05 +0000)]
[SampleFDO] Add ExtBinary format to support extension of binary profile.
This is a patch split from https://reviews.llvm.org/D66374. It tries to add
a new format of profile called ExtBinary. The format adds a section header
table to the profile and organize the profile in sections, so the future
extension like adding a new section or extending an existing section will be
easier while keeping backward compatiblity feasible.
Philip Reames [Fri, 23 Aug 2019 18:27:57 +0000 (18:27 +0000)]
Fix a bug in just submitted rL369789
Started implementing the vector case and realized the scalar case hadn't handled the GEP producing a different type than the base correctly. It's entertaining seeing what slips through review when we're focused on the 'hard' parts. :(
Also adding an extra vector test as it happened to be in workspace and wasn't worth separating.
This generalizes the isGEPKnownNonNull rule from ValueTracking to apply when we do not know if the base is non-null, and thus need to replace one condition with another.
The core notion is that since an inbounds GEP can only form null if the base pointer is null and the offset is zero. However, if the offset is non-zero, the the "inbounds" marker makes the result poison. Thus, we're free to ignore the case where the offset is non-zero. Similarly, there's no case under which a non-null base can result in a null result without generating poison.
[BasicAA] Use dereferenceability to reason about aliasing
Summary:
We already use the fact that an object with known size X does not alias
another objection of size Y > X before. With this commit, we use
dereferenceability information to determine a lower bound for Y and not
only rely on the user provided query size.
The result for @global_and_deref_arg_2() and @local_and_deref_ret_2()
in test/Analysis/BasicAA/dereferenceable.ll improved with this patch.
[Attributor] Deal with shrinking dereferenceability in a loop
Summary:
If we have a loop in which the dereferenceability of a pointer decreases
we did slowly decrease it iteration by iteration, leading to a timeout.
With this patch we detect such circular reasoning and indicate a
fixpoint early.
Allow Compiler.h to be included in C files and fix fallthrough warnings
Summary:
Since clang does not support comment style fallthrough annotations
these should be switched to macros defined in Compiler.h. This
requires some fixing to Compiler.h.
Jeremy Morse [Fri, 23 Aug 2019 16:33:42 +0000 (16:33 +0000)]
[DebugInfo] Remove invalidated locations during LiveDebugValues
LiveDebugValues gives variable locations to blocks, but it should also take
away. There are various circumstances where a variable location is known
until a loop backedge with a different location is detected. In those
circumstances, where there's no agreement on the variable location, it
should be undef / removed, otherwise we end up picking a location that's
valid on some loop iterations but not others.
However, LiveDebugValues doesn't currently do this, see the new testcase
attached. Without this patch, the location of !3 is assumed to be %bar
through the loop. Once it's added to the In-Locations list, it's never
removed, even though the later dbg.value(0... of !3 makes the location
un-knowable.
This patch checks during block-location-joining to see whether any
previously-present locations have been removed in a predecessor. If they
have, the live-ins have changed, and the block needs reprocessing.
Similarly, in transferTerminator, assign rather than |= the Out-Locations
after processing a block, as we may have deleted some previously valid
locations. This will mean that LiveDebugValues performs more propagation
-- but that's necessary for it being correct.
[Attributor][Fix] Deal with "growing" dereferenceability
Summary:
If we have a negative inbounds offset dereferenceabily "grows". However,
until we do not handle the overflow that can occur in the
dereferenceable bytes and the problem with loops, we simply do not grow
the state.
[Attributor][NFCI] Avoid lookups when resolving returned values
If the number of potentially returned values not change since the last
traversal we do not need to visit the returned values again. This works
as we only add values to the returned values set now.
[Attributor] FIX: Treat new attributes as changed ones
Summary:
When we have new attributes and we end the fixpoint iteration because
the iteration limit is reached, we need to treat the new ones as if they
changed in the last iteration, as they might have.
This adds a test for which we should not derive anything regardless of
the iteration limit, e.g., if we abort there should not be any
attributes manifested in the IR.
Teresa Johnson [Fri, 23 Aug 2019 15:18:58 +0000 (15:18 +0000)]
[ThinLTO] Fix handling of weak interposable symbols
Summary:
Keep aliasees alive if their alias is live, otherwise we end up with an
alias to a declaration, which is invalid. This can happen when the
aliasee is weak and non-prevailing.
This fix exposed the fact that we were then attempting to internalize
the weak symbol, which was not exported as it was not prevailing. We
should not internalize interposable symbols in general, unless this is
the prevailing copy, since it can lead to incorrect inlining and other
optimizations. Most of the changes in this patch are due to the
restructuring required to pass down the prevailing callback.
Finally, while implementing the test cases, I found that in the case of
a weak aliasee that is still marked not live because its alias isn't
live, after dropping the definition we incorrectly marked the
declaration with weak linkage when resolving prevailing symbols in the
module. This was due to some special case handling for symbols marked
WeakLinkage in the summary located before instead of after a subsequent
check for the symbol being a declaration. It turns out that we don't
actually need this special case handling any more (looking back at the
history, when that was added the code was structured quite differently)
- we will correctly mark with weak linkage further below when the
definition hasn't been dropped.
[MustExec] Add a generic "must-be-executed-context" explorer
Given an instruction I, the MustBeExecutedContextExplorer allows to
easily traverse instructions that are guaranteed to be executed whenever
I is. For now, these instruction have to be statically "after" I, in
the same or different basic blocks.
This patch also adds a pass which prints the must-be-executed-context
for each instruction in a module. It is used to test the
MustBeExecutedContextExplorer, for now on the examples given in the
class comment of the MustBeExecutedIterator.
Jordan Rupprecht [Fri, 23 Aug 2019 14:28:58 +0000 (14:28 +0000)]
[llvm-objcopy] Strip debug sections when running with --strip-unneeded.
Summary:
GNU --strip-unneeded strips debugging sections as well. Do that for llvm-objcopy as well.
Additionally, add a test that verifies we keep the .gnu_debuglink section. This apparently was not always the case, and I'm not sure which commit fixed it, but there doesn't appear to be any test coverage to make sure we continue to do so.
Simon Atanasyan [Fri, 23 Aug 2019 13:36:24 +0000 (13:36 +0000)]
[mips] Reduce number of instructions used for loading a global symbol's value
Now `lw/sw $reg, sym+offset` pseudo instructions for global symbol `sym`
are lowering into the following three instructions.
```
lw $reg, %got(symbol)($gp)
addiu $reg, $reg, offset
lw/sw $reg, 0($reg)
```
It's possible to reduce the number of instructions by taking the offset
in account in the final `lw/sw` command. This patch implements that
optimization.
```
lw $reg, %got(symbol)($gp)
lw/sw $reg, offset($reg)
```
Simon Atanasyan [Fri, 23 Aug 2019 13:36:14 +0000 (13:36 +0000)]
[mips] Do not include offset into `%got` expression for global symbols
Now pseudo instruction `la $6, symbol+8($6)` is expanding into the following
chain of commands:
```
lw $1, %got(symbol+8)($gp)
addiu $1, $1, 8
addu $6, $1, $6
```
This is incorrect. When a linker handles the `R_MIPS_GOT16` relocation,
it does not expect to get any addend and breaks on assertion. Otherwise
it has to create new GOT entry for each unique "sym + offset" pair.
Offset for a global symbol should be added to result of loading GOT
entry by a separate `add` command.
The patch fixes the problem by stripping off an offset from the expression
passed to the `%got`. That's interesting that even current code inserts
a separate `add` command.
Andrea Di Biagio [Fri, 23 Aug 2019 12:19:45 +0000 (12:19 +0000)]
[X86][BtVer2] Add a read-advance to every implicit register use of CMPXCHG8B/16B.
This is a follow up of r369642.
This patch assigns a ReadAfterLd to every implicit register use of instruction
CMPXCHG8B and instruction CMPXCHG16B. Perf micro-benchmarks show that implicit
registers are read after 3cy from the start of execution.
Andrea Di Biagio [Fri, 23 Aug 2019 11:34:10 +0000 (11:34 +0000)]
[X86][BtVer2] Fix latency of ALU RMW instructions.
Excluding ADC/SBB and the bit-test instructions (BTR/BTS/BTC), the observed
latency of all other RMW integer arithmetic/logic instructions is 6cy and not
5cy.
The same latency profile applies to SUB/AND/OR/XOR/INC/DEC.
The observed latency of ADC/SBB is 7-8cy. So we need a different write to model
those. Latency of BTS/BTR/BTC is not fixed by this patch (they are much slower
than what the model for btver2 currently reports).
Martin Storsjo [Fri, 23 Aug 2019 11:18:11 +0000 (11:18 +0000)]
[llvm-dlltool] Make sure to strip decorations from ExtName for renamed exports
ExtName should not be decorated, just like Name.
This avoids double decoration on symbols in import libraries
that use = for renaming functions. (Weak aliases, which use ==,
worked fine with respect to decoration.)
George Rimar [Fri, 23 Aug 2019 09:31:07 +0000 (09:31 +0000)]
[yaml2obj] - Allow setting the symbol st_other field to any integer.
st_other field of a symbol usually contains its visibility.
Other bits are usually 0, though some targets, like
MIPS can set them using the named bit field values.
Problem is that there is no way to set an arbitrary value now,
though that might be useful for our test cases.
In this patch I introduced a way to set st_other to any numeric
value using the new StOther field.
I added a test and simplified the existent one to show the effect/benefit
Craig Topper [Fri, 23 Aug 2019 07:38:25 +0000 (07:38 +0000)]
[X86] Add a further unrolled madd reduction test case that shows several deficiencies.
The AVX2 check lines show two issues. An ADD that became an OR
because we knew the input was disjoint, but really it was zero
so we should have just removed the ADD/OR all together.
Relatedly we use 128-bit VPMADDWD instructions followed by
256-bit VPADDD operations. We should be able to narrow these
VPADDDs.
Craig Topper [Fri, 23 Aug 2019 05:33:27 +0000 (05:33 +0000)]
[X86] Improve lowering of v2i32 SAD handling in combineLoopSADPattern.
For v2i32 we only feed 2 i8 elements into the psadbw instructions
with 0s in the other 14 bytes. The resulting psadbw instruction
will produce zeros in bits [127:16] of the output. We need to take
the result and feed it to a v2i32 add where the first element
includes bits [15:0] of the sad result. The other element should
be zero.
Prior to this patch we were using a truncate to take 0 from
bits 95:64 of the psadbw. This results in a pshufd to move those
bits to 63:32. But since we also have zeroes in bits 63:32 of
the psadbw output, we should just take those bits.
The previous code probably worked better with promoting legalization,
but now we use widening legalization. I've preserved the old
behavior if -x86-experimental-vector-widening-legalization=false
until we get that option removed.
Philip Reames [Fri, 23 Aug 2019 04:03:23 +0000 (04:03 +0000)]
[IndVars] Fix a bug noticed by inspection
We were computing the loop exit value, but not ensuring the addrec belonged to the loop whose exit value we were computing. I couldn't actually trip this; the test case shows the basic setup which *might* trip this, but none of the variations I've tried actually do.
Fangrui Song [Fri, 23 Aug 2019 02:17:04 +0000 (02:17 +0000)]
[AlignmentFromAssumptions] getNewAlignmentDiff(): use getURemExpr()
The alignment is calculated incorrectly, thus sometimes it doesn't generate aligned mov instructions, as shown by the example below:
```
// b.cc
typedef long long index;
extern "C" index g_tid;
extern "C" index g_num;
void add3(float* __restrict__ a, float* __restrict__ b, float* __restrict__ c) {
index n = 64*1024;
index m = 16*1024;
index k = 4*1024;
index tid = g_tid;
index num = g_num;
__builtin_assume_aligned(a, 32);
__builtin_assume_aligned(b, 32);
__builtin_assume_aligned(c, 32);
for (index i0=tid*k; i0<m; i0+=num*k)
for (index i1=0; i1<n*m; i1+=m)
for (index i2=0; i2<k; i2++)
c[i1+i0+i2] = b[i0+i2] + a[i1+i0+i2];
}
```
Compile with `clang b.cc -Ofast -march=skylake -mavx2 -S`
```
vmovaps -224(%rdi,%rbx,4), %ymm0
vmovups -192(%rdi,%rbx,4), %ymm1 # should be movaps
vmovups -160(%rdi,%rbx,4), %ymm2 # should be movaps
vmovups -128(%rdi,%rbx,4), %ymm3 # should be movaps
vaddps -224(%rsi,%rbx,4), %ymm0, %ymm0
vaddps -192(%rsi,%rbx,4), %ymm1, %ymm1
vaddps -160(%rsi,%rbx,4), %ymm2, %ymm2
vaddps -128(%rsi,%rbx,4), %ymm3, %ymm3
vmovaps %ymm0, -224(%rdx,%rbx,4)
vmovups %ymm1, -192(%rdx,%rbx,4) # should be movaps
vmovups %ymm2, -160(%rdx,%rbx,4) # should be movaps
vmovups %ymm3, -128(%rdx,%rbx,4) # should be movaps
```
Differential Revision: https://reviews.llvm.org/D66575
Patch by Dun Liang
hwasan: Untag unwound stack frames by wrapping personality functions.
One problem with untagging memory in landing pads is that it only works
correctly if the function that catches the exception is instrumented.
If the function is uninstrumented, we have no opportunity to untag the
memory.
To address this, replace landing pad instrumentation with personality function
wrapping. Each function with an instrumented stack has its personality function
replaced with a wrapper provided by the runtime. Functions that did not have
a personality function to begin with also get wrappers if they may be unwound
past. As the unwinder calls personality functions during stack unwinding,
the original personality function is called and the function's stack frame is
untagged by the wrapper if the personality function instructs the unwinder
to keep unwinding. If unwinding stops at a landing pad, the function is
still responsible for untagging its stack frame if it resumes unwinding.
The old landing pad mechanism is preserved for compatibility with old runtimes.
Sam Clegg [Fri, 23 Aug 2019 01:00:55 +0000 (01:00 +0000)]
[MC] Minor cleanup to MCFixup::Kind handling. NFC.
Prefer `MCFixupKind` where possible and add getTargetKind() to
convert to `unsigned` when needed rather than scattering cast
operators around the place.
IR. Change strip* family of functions to not look through aliases.
I noticed another instance of the issue where references to aliases were
being replaced with aliasees, this time in InstCombine. In the instance that
I saw it turned out to be only a QoI issue (a symbol ended up being missing
from the symbol table due to the last reference to the alias being removed,
preventing HWASAN from symbolizing a global reference), but it could easily
have manifested as incorrect behaviour.
Since this is the third such issue encountered (previously: D65118, D65314)
it seems to be time to address this common error/QoI issue once and for all
and make the strip* family of functions not look through aliases.
Includes a test for the specific issue that I saw, but no doubt there are
other similar bugs fixed here.
As with D65118 this has been tested to make sure that the optimization isn't
load bearing. I built Clang, Chromium for Linux, Android and Windows as well
as the test-suite and there were no size regressions.
Summary:
The matchers for section/symbol related flags (e.g. `--keep-symbol=Name` or `--regex --keep-symbol=foo.*`) are currently just vectors that are matched linearlly. However, adding wildcard support would require negative matching too, e.g. a symbol should be removed if it matches a wildcard *but* doesn't match some other wildcard.
To make the next patch simpler, consolidate matching logic to a class defined in CopyConfig that takes care of matching.
Matt Arsenault [Thu, 22 Aug 2019 17:29:17 +0000 (17:29 +0000)]
GlobalISel: Don't create G_UADDE with constant false carry in
The x86 tests are now broken (in paticular add-scalar.ll now hits the
DAG fallback) due to not handling G_UADDO. The DAG x86 backend has a
custom lowering for this, so that will need to be implemented.
[MachO][TLOF] Use hasLocalLinkage to determine if indirect symbol is local
Local symbols in the indirect symbol table contain the value
`INDIRECT_SYMBOL_LOCAL` and the corresponding __pointers entry must
contain the address of the target.
In r349060, I added support for local symbols in the indirect symbol
table, which was checking if the symbol `isDefined` && `!isExternal` to
determine if the symbol is local or not.
It turns out that `isDefined` will return false if the user of the
symbol comes before its definition, and we'll again generate .long 0
which will be the symbol at the adress 0x0.
Instead of doing that, use GlobalValue::hasLocalLinkage() to check if
the symbol is local.
Guozhi Wei [Thu, 22 Aug 2019 16:21:32 +0000 (16:21 +0000)]
[MBP] Disable aggressive loop rotate in plain mode
Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
Amaury Sechet [Thu, 22 Aug 2019 15:35:45 +0000 (15:35 +0000)]
[DAGCombiner] Remove explicit call to AddToWorklist in sqrt and reciprocal computations
Summary: These nodes end up being processed regardless due to DAGCombiner ensuring arguments are processed. This changes the order in which nodes are processed, which fixes an issue on PowerPC.
Excluding the 64bit variant, which has a latency of 6cy, every other instruction
has a latency of 3cy. However, the number of decoded macro-opcodes (as well as
the resource cyles) depend on the MUL size.
The two operand MULs have a more predictable profile (see below):
Sean Fertile [Thu, 22 Aug 2019 15:11:28 +0000 (15:11 +0000)]
[PowerPC] Add combined ELF ABI and 32/64 bit queries to the subtarget. [NFC]
A lot of places in the code combine checks for both ABI (SVR4/Darwin/AIX) and
addressing mode (64-bit vs 32-bit). In an attempt to make some of the code more
readable I've added a couple functions that combine checking for the ELF abi and
64-bit/32-bit code at once. As we add more AIX support I intend to add similar
functions for the AIX ABI.
Sean Fertile [Thu, 22 Aug 2019 15:11:23 +0000 (15:11 +0000)]
[PowerPC][XCOFF][MC] Explicitly set containing csect on symbols. [NFC]
Previously we would get the csect a symbol was contained in through its
fragment. This works only if we are writing an object file, and only for
defined symbols. To fix this we set the contating csect explicitly on the
MCSymbolXCOFF object.
Hideto Ueno [Thu, 22 Aug 2019 14:18:29 +0000 (14:18 +0000)]
[Attributor][NFC] Move DerefState to header and use StateWrapper
Summary: In D65402, I want to get DerefState from AADereferenceable but it was not allowed. This patch moves DerefState definition into Attributor.h and makes AADerefenceable inherit StateWrapper.
Jinsong Ji [Thu, 22 Aug 2019 13:44:47 +0000 (13:44 +0000)]
[SlotIndexes] Add print-slotindexes to disable printing slotindexes
Summary:
When we print the IR with --print-after/before-*,
SlotIndexes will be printed whenever available (We haven't freed it).
This introduces some noises when we try to compare the IR
among different optimizations.
eg:
-print-before=machine-cp will print SlotIndexes for 1st machine-cp
pass, but NOT for 2nd machine-cp;
-print-after=machine-cp will NOT print SlotIndexes for both
machine-cp passes.
So SlotIndexes in 1st pass introduce noises when differing these IRs.
George Rimar [Thu, 22 Aug 2019 12:39:56 +0000 (12:39 +0000)]
[yaml2obj] - Lookup relocation symbols in dynamic symbol when .dynsym referenced.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40337.
Previously, it was always assumed that relocations referenced symbols in the static symbol table.
Now, if the Link field references a section called ".dynsym" it will look up these symbols
in the dynamic symbol table.
This patch is heavily based on D59097 by James Henderson
Sylvestre Ledru [Thu, 22 Aug 2019 12:16:08 +0000 (12:16 +0000)]
Fix some regressions caused by r369553 on old versions of Debian and Ubuntu
It was causing some errors like:
Encoding error:
'ascii' codec can't decode byte 0xe2 in position 341: ordinal not in range(128)
The full traceback has been saved in /tmp/sphinx-err-y2fq4dtb.log, if you want to report the issue to the developers.
Andrea Di Biagio [Thu, 22 Aug 2019 11:32:47 +0000 (11:32 +0000)]
[X86][BtVer2] Fix latency and throughput of XCHG and XADD.
On Jaguar, XCHG has a latency of 1cy and decodes to 2 macro-opcodes. Maximum
throughput for XCHG is 1 IPC. The byte exchange has worse latency and decodes to
1 extra uOP; maximum observed throughput is 0.5 IPC.
The reg-mem forms of XCHG are atomic operations with an observed latency of
16cy. The resource usage is similar to the XCHGrr variants. The biggest
difference is obviously the bus-locking, which prevents the LS to issue other
memory uOPs in parallel until the unlocking store uOP is executed.
The exchanged in/out register operand becomes available after 11cy from the
start of execution. Added test xchg.s to verify that we correctly see that
register write committed in 11cy (and not 16cy).
Reg-reg XADD instructions have the same latency/throughput than the byte
exchange (register-register variant).
The non-atomic RM variants have a latency of 11cy, and decode to 4
macro-opcodes. They still consume 2 ALU pipes, and the exchange in/out register
operand becomes available in 3cy (it matches the 'load-to-use latency').
Hans Wennborg [Thu, 22 Aug 2019 09:16:53 +0000 (09:16 +0000)]
Revert r369626 "[ARM] Fix lsrl with a 128/256 bit shift amount or a shift of 32"
It broke the bots, see e.g. http://lab.llvm.org:8011/builders/clang-cuda-build/builds/36275/
> This patch fixes shifts by a 128/256 bit shift amount. It also fixes
> codegen for shifts of 32 by delegating to LLVM's default optimisation
> instead of emitting a long shift.
>
> Tests that used to generate long shifts of 32 are updated to check for the
> more optimised codegen.
>
> Differential revision: https://reviews.llvm.org/D66519
>
> llvm-svn: 369626
We do not need it, std::error_code is used mostly for COFF and
this patch rewrites the calls to use a different overload.
Having reportError(std::error_code EC, ... is excessive by itself,
because API that use error codes actually needs refactoring to
use Error/Expected<> instead.
Craig Topper [Thu, 22 Aug 2019 08:18:45 +0000 (08:18 +0000)]
[X86] Lower the cost of v2i32->v2f64 sint_to_fp under vector widening legalization.
I don't really understand the costs we're using for fp_to_sint,
but prior to widening legalization we used 20 as the cost for this
via the v2i64->v2f64 entry. That number seems better than the 40
we got with widening legalization. So now we need either a
v2i32->v2f64 entry or a v4i32->v2f64 entry depending on whether
AVX is enabled or not since we skip the first SSE2 table look up
under AVX.
Pavel Labath [Thu, 22 Aug 2019 08:13:30 +0000 (08:13 +0000)]
[Support] Improve readNativeFile(Slice) interface
Summary:
There was a subtle, but pretty important difference between the Slice
and regular versions of this function. The Slice function was
zero-initializing the rest of the buffer when the read syscall returned
less bytes than expected, while the regular function did not.
This patch removes the inconsistency by making both functions *not*
zero-initialize the buffer. The zeroing code is moved to the
MemoryBuffer class, which is currently the only user of this code. This
makes the API more consistent, and the code shorter.
While in there, I also refactor the functions to return the number of
bytes through the regular return value (via Expected<size_t>) instead of
a separate by-ref argument.
Sam Tebbs [Thu, 22 Aug 2019 08:12:06 +0000 (08:12 +0000)]
[ARM] Fix lsrl with a 128/256 bit shift amount or a shift of 32
This patch fixes shifts by a 128/256 bit shift amount. It also fixes
codegen for shifts of 32 by delegating to LLVM's default optimisation
instead of emitting a long shift.
Tests that used to generate long shifts of 32 are updated to check for the
more optimised codegen.
Shiva Chen [Thu, 22 Aug 2019 04:59:43 +0000 (04:59 +0000)]
[TargetLowering] Remove optional arguments passing to makeLibCall
The patch introduces MakeLibCallOptions struct as suggested by @efriedma on D65497.
The struct contain argument flags which will pass to makeLibCall function.
The patch should not has any functionality changes.
Joel E. Denny [Thu, 22 Aug 2019 03:42:01 +0000 (03:42 +0000)]
[lit] Diagnose insufficient args to internal env
Without this patch, failing to provide a subcommand to lit's internal
`env` results in either a python `IndexError` or an attempt to execute
the final `env` argument, such as `FOO=1`, as a command. This patch
diagnoses those cases with a more helpful message.
Fangrui Song [Thu, 22 Aug 2019 01:48:34 +0000 (01:48 +0000)]
[COFF] Fix section name for constants larger than 64 bits on Windows
APIntToHexString returns wrong value ("0000000000000000ffffffffffffffff")
for integer larger than 64 bits, and thus
TargetLoweringObjectFileCOFF::getSectionForConstant returns same section name
for all numbers larger than 64 bits. This patch tries to fix it.
Differential Revision: https://reviews.llvm.org/D66458
Patch by Senran Zhang
Cyndy Ishida [Wed, 21 Aug 2019 23:30:53 +0000 (23:30 +0000)]
[Object] Add tapi files to object
Summary:
The intention for this is to allow reading and printing symbols out from
llvm-nm. Tapi file, and Tapi universal follow a similiar format to
their respective MachO Object format.
The tests are dependent on llvm-nm processing tbd files which is why its in D66160
projects / llvm / log