Tian Hao [Thu, 17 Aug 2017 13:13:45 +0000 (21:13 +0800)]
component/bt : remove all GKI reference
1. remove GKI(not use osi_free_and_reset)
2. modify mutex/semaphore to individual directory
3. set osi_malloc as malloc(previously use calloc)
4. change osi allocator debug osi_free
5. fix rebase of remove GKI
Ivan Grokhotkov [Tue, 22 Aug 2017 17:07:03 +0000 (01:07 +0800)]
console: initialize buf_size before calling open_memstream
POSIX open_memstream documentation [1] does not mention that it may use
the value supplied in buf_size before the call.
newlib implementation of open_memstream does use it as a hint of the
buffer size [2]. To avoid using potential garbage in this variable,
newlib caps the size to 64kB (!).
If the allocation of this initial buffer fails, NULL file pointer is
returned. Previous code did not check returned file pointer and crashed
when it was used.
Initialize size to zero (in which case newlib allocates a 64 byte
buffer), and check the returned file pointer.
1. add sens_struct.h
2. add definition of RTCCNTL and RTCIO
3. modify touch pad examples
4. update example code.
5. add comments add option in menuconfig
6. fix issue that pad index 8 and 9 are mismatched
7. add touch_pad_read_filtered() api to get value filtered by iir filter
8. modify touch pad isr func
9. Make the items in perihperal.ld in the sequence of address
10. delete Kconfig for touch pad
11. add touchpad filter APIs to adjust the filter
12. add touch_pad into index.rst
13. add touch_pad in Doxyfile
14. add touch_pad.rst
Amey Inamdar [Mon, 21 Aug 2017 09:56:16 +0000 (15:26 +0530)]
nvs: Support for handling multiple NVS partitions
This commit adds support for multiple NVS partitions. This provides application a flexibility to have multiple NVS
partitions such as separate partition with read-only manufacturing data and read-write partition with configuration.
Application can also use this to separate out application's configuration storage from system configuration.
This feature does not change any of the basic property of NVS subsystem. The same-named namespaces across partitions are
considered to be different namespaces. The original NVS API available for the applications remains unchanged. The only
difference is that instead of first NVS partition in the partition table, it now operates on the partition with label
"nvs" (which is default in the IDF provided partition table files). Additional APIs are provided to open a handle and
erase NVS with partition name as a parameter.
A test case is added in the host tests and it is made sure that all the host tests pass. nvs_rw_value app is also tested
with multiple partitions.
Ivan Grokhotkov [Sun, 20 Aug 2017 16:09:12 +0000 (00:09 +0800)]
docs: generate documentation for Kconfig options
This adds a simple script which parses Kconfig files using Kconfiglib
and emits ReST document with the list of all options. For each option
a link target is generated, to make it possible to link to any Kconfig
option from the rest of the documentation.
Since Kconfiglib is not on PyPI, the latest version (45f87b9d) is
bundled into the docs directory.
zhiweijian [Sun, 20 Aug 2017 09:52:57 +0000 (17:52 +0800)]
Component/bt: fixbug_set_rand_addr()
- The two most significant bits of the address shall be equal to 1
- All bits of the random part of the address shall not be equal to 1
- All bits of the random part of the address shall not be equal to 0
Ivan Grokhotkov [Tue, 15 Aug 2017 08:47:55 +0000 (16:47 +0800)]
idf_monitor: send CR when ENTER is pressed
Other terminal emulators (screen, minicom) default to sending CR when
ENTER is pressed on the keyboard. Make behavior of idf_monitor
consistent with them.
Ivan Grokhotkov [Tue, 15 Aug 2017 08:46:22 +0000 (16:46 +0800)]
idf_monitor: use cancellation and Console.getkey from pyserial 3.3.0+
Between 3.1.0 and 3.3.0, pyserial had thread cancellation implemented
using a select, which blocked on the stdin and an auxiliary pipe. When
thread had to be cancelled, a byte would be sent into the pipe,
unblocking stdin.
Unfortunately, this method suffers from a problem with using select on
a StreamReader (which represents the decoder wrapped around stdin).
In some cases, when the TTY sends an escape sequence in response to
an escape sequence received from serial, this escape sequence will not
be read from stdin until some key is pressed.
In https://github.com/pyserial/pyserial/commit/cab3dab, this method
was replaced with an TIOCSTI ioctl. This change makes sure we use the
new cancellation method even if the script is running with older
pyserial.
Ivan Grokhotkov [Tue, 15 Aug 2017 08:23:23 +0000 (16:23 +0800)]
vfs: support for blocking reads, more newline conversion options
Previously VFS driver for UART could only use simple non-blocking
functions to read from and write to the UART. UART driver provides more
complex blocking and interrupt-driven functions, which can be used
instead.
This commit adds optional support for using UART driver's functions.
Also added is a more flexible mechanism for configuring newline
conversion rules on input and output.
This commit also fixes a bug that all UARTs shared one static variable
used as a character buffer in newline conversion code. This variable is
changed to be per-UART.
krzychb [Wed, 9 Aug 2017 19:06:12 +0000 (21:06 +0200)]
ESP-WROVER-KIT now integrates the ESP32-WROVER module by default. But it is still compatible with both ESP-WROOM-32 and ESP32-WROVER. The latest baseboard is still V3. The original 'ESP-WROVER-KIT' that integrates ESP-WROOM-32 is unlikely to be produced any longer, while the original 'ESP-WROVER-KIT-RVB' is renamed as “ESP-WROVER-KIT” and in mass production.
Angus Gratton [Thu, 17 Aug 2017 07:15:04 +0000 (17:15 +1000)]
mbedtls: Expose compile-time config, disable some things by default
* Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default
* Saves about 40KB from the default TLS client code size
* Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES)
(ping https://github.com/espressif/arduino-esp32/issues/575 )
* Allows up to another 20-30KB code size to be trimmed without security
implications if using DER formatted certificates, RSA ciphersuites only,
etc.
* Can save up to another 8KB by setting the TLS Role to Server or Client only.
Kedar Sovani [Wed, 16 Aug 2017 06:33:37 +0000 (12:03 +0530)]
ethernet: remove CONFIG_ETHERNET
1. Hello World application shows no footprint difference before and
after this change
2. examples/ethernet/ethernet application compiles properly (can't
test with my board)
Ivan Grokhotkov [Wed, 12 Jul 2017 13:17:28 +0000 (21:17 +0800)]
sdmmc: add support for high speed (HS) mode
By default SD cards are initialized in default speed (DS) mode. Enabling
HS mode requires SWITCH_FUNC command to be sent twice: first time to
query if the card supports switching to HS mode, second time to perform
the switch.
This change implements SWITCH_FUNC command and adds the procedure to
switch to HS mode.
Ivan Grokhotkov [Wed, 12 Jul 2017 13:11:47 +0000 (21:11 +0800)]
sdmmc: implement deselecting a card
In some cases the card needs to be returned to standby mode from data
transfer mode. This is done using CMD7 command, which does not receive
any response in this case.
projects / esp-idf / log