Frederic Riss [Wed, 3 Jun 2015 20:29:24 +0000 (20:29 +0000)]
Reapply r238941 - [dsymutil] Accept a YAML debug map as input instead of a binary.
With a couple more constructors that GCC thinks are necessary.
Original commit message:
[dsymutil] Accept a YAML debug map as input instead of a binary.
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
Tim Northover [Wed, 3 Jun 2015 18:26:52 +0000 (18:26 +0000)]
RuntimeDyld: override EH frame registration with trivial version.
llvm-rtdyld was relying on the default memory manager's EH frame registration,
which is host-dependent rather than target-dependent. As a result, big-endian
ELF Mips EH frames were being registered on OS X (and elsewhere). This is a
really bad idea.
Frederic Riss [Wed, 3 Jun 2015 16:57:16 +0000 (16:57 +0000)]
[dsymutil] Accept a YAML debug map as input instead of a binary.
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
Frederic Riss [Wed, 3 Jun 2015 16:57:12 +0000 (16:57 +0000)]
[dsymutil] Replace -parse-only option with -dump-debug-map
As the serialized debug map is becoming a first class citizen, a way
to cleanly dump it is required. We used -parse-only combined with
-v for that purpose before, but it dumps a lot of unrelated debug
stuff. Dumping the debug map was the only use of the -parse-only flag
anyway, so replace it with a more useful option.
The existing code would unnecessarily break LDRD/STRD apart with
non-adjacent registers, on thumb2 this is not necessary.
Ideally on thumb2 we shouldn't match for ldrd/strd pre-regalloc anymore
as there is not reason to set register hints anymore, changing that is
something for a future patch however.
Asaf Badouh [Wed, 3 Jun 2015 13:41:48 +0000 (13:41 +0000)]
re-apply 238809
AVX-512: Implemented GETEXP instruction for KNL and SKX
Added rounding mode modifier for SQRTPS/PD
Added tests for encoding and intrinsics.
CR:
http://reviews.llvm.org/D9991
X86: Added MPX feature and bound registers.
Intel® Memory Protection Extensions (Intel® MPX) is a new feature in Skylake.
It is a part of KNL and SKX sets. It is also a part of Skylake client.
I added definition of %bnd0 - %bnd3 registers, each register is a pair of 64-bit integers.
Daniel Sanders [Wed, 3 Jun 2015 10:27:28 +0000 (10:27 +0000)]
Re-commit r238838, r238844 with fix for host/target endian mismatch and windows buildbot.
The windows buildbot originally failed because the check expressions are
evaluated as 64-bit values, even for 32-bit symbols. Fixed this by comparing
bottom 32-bits of the expressions.
The host/target endian mismatch issue is that it's invalid to read/write target
values using a host pointer without taking care of endian differences between
the target and host. Most (if not all) instances of
reinterpret_cast<uint32_t*>() in the RuntimeDyld are examples of this bug.
This has been fixed for Mips using the endian aware read/write functions.
The original commits were:
r238838:
[mips] Add RuntimeDyld tests for currently supported O32 relocations.
-----------------------------------------------------------------------------
If the value is non-zero, it represents a string table index that gives the
symbol name. Otherwise, the symbol table entry has no name.
--------------------------------------------------------------------------
In particular, a st_name of 0 most certainly doesn't mean that the symbol has
the same name as the section.
Justin Bogner [Wed, 3 Jun 2015 02:48:09 +0000 (02:48 +0000)]
llvm-cov: Make llvm-cov --version DTRT
In r233132 we started requiring a subcommand in llvm-cov, but this
made `llvm-cov --version` invalid, which is kind of silly. Print
version information in this case, as most people would expect.
Clarify when we can avoid creating names for temp symbols.
Some temporary symbols are created by MC itself. These symbols are never used
for lookup and are never included in the object symbol table, so we can
avoid creating a name for them.
Other temporaries are created by CodeGen or by the user by explicitly asking
for a name starting with .L (or L on MachO).
These temporaries behave like regular symbols, we just try to avoid including
them in the object symbol table, but sometimes they end up there:
const char *foo() {
return "abc" + 3;
}
will have a relocation pointing to a .L symbol.
It just so happens that almost all MC created temporary has the AlwaysAddSuffix
option and CodeGen/user created ones don't.
One interesting future optimization would be to use unnamed symbols for
all temporaries, but that would require use an st_name of 0 or
having the object writer create the names if a symbol does end up in the
symbol table.
No testcase since this just avoid creating a few extra names for MC created
temporaries.
Sanjoy Das [Tue, 2 Jun 2015 22:33:37 +0000 (22:33 +0000)]
[RewriteStatepointsForGC] Strip deref info after rewriting.
Summary:
Once a gc.statepoint has been rewritten to relocate live references, the
SSA values represent physical pointers instead of logical references.
Logical dereferencability does not imply physical dereferencability and
after RewriteStatepointsForGC has run any attributes that imply
dereferencability of the logical references need to be stripped.
This current approach is conservative, and can be made more precise
later if needed. For starters, we need to strip dereferencable
attributes only from pointers that live in the GC address space.
Sanjoy Das [Tue, 2 Jun 2015 22:33:30 +0000 (22:33 +0000)]
[SelectionDAG] Fix PR23603.
Summary:
LLVM's MI level notion of invariant_load is different from LLVM's IR
level notion of invariant_load with respect to dereferenceability. The
IR notion of invariant_load only guarantees that all *non-faulting*
invariant loads result in the same value. The MI notion of invariant
load guarantees that the load can be legally moved to any location
within its containing function. The MI notion of invariant_load is
stronger than the IR notion of invariant_load -- an MI invariant_load is
an IR invariant_load + a guarantee that the location being loaded from
is dereferenceable throughout the function's lifetime.
[IR/AsmWriter] Output escape sequences if the first character isdigit()
If the first character in a metadata attachment's name is a digit, it has
to be output using an escape sequence, otherwise it's not valid text IR.
Removed an over-zealous assert from LLVMContext which didn't allow this.
The rule should only apply to text IR. Actual names can have any sequence
of non-NUL bytes.
Daniel Sanders [Tue, 2 Jun 2015 20:32:50 +0000 (20:32 +0000)]
[mips] Make TTypeEncoding indirect to allow .eh_frame to be read-only.
Summary:
Following on from r209907 which made personality encodings indirect, do the
same for TType encodings. This fixes the case where a try/catch block needs
to generate references to, for example, std::exception in the
.gcc_except_table.
Previous attempts at committing this broke the buildbots due to bugs in IAS.
These bugs have now been fixed so trying again.
DebugInfo: Really support 2^16 arguments in a subprogram
As a follow-up to r235955, actually support up to 65535 arguments in a
subprogram. r235955 missed assembly support, having only tested the new
limit via C++ unit tests. Code patch by Amjad Aboud.
Sanjay Patel [Tue, 2 Jun 2015 15:28:15 +0000 (15:28 +0000)]
make reciprocal estimate code generation more flexible by adding command-line options (2nd try)
The first try (r238051) to land this was reverted due to bot failures
that were hopefully addressed by r238788.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
AVX-512: Shorten implementation of lowerV16X32VectorShuffle()
using lowerVectorShuffleWithSHUFPS() and other shuffle-helpers routines.
Added matching of VALIGN instruction.
Summary:
With this change we are able to realign the stack dynamically, whenever it
contains objects with alignment requirements that are larger than the
alignment specified from the given ABI.
We have to use the $fp register as the frame pointer when we perform
dynamic stack realignment. In complex stack frames, with variably-sized
objects, we reserve additionally the callee-saved register $s7 as the
base pointer in order to reference locals.
Toma Tabacu [Tue, 2 Jun 2015 10:34:10 +0000 (10:34 +0000)]
[mips] [IAS] Reformat mips-expansions.s. NFC.
Summary:
Make mips-expansions.s more readable by grouping the instructions with their respective CHECK's.
This test is going to get a lot bigger soon and it will become essentially unreadable if the current formatting is kept.
I've also made the comments more useful and accurate, and I've restricted the RUN lines to under 80 columns.
The existing code would unnecessarily break LDRD/STRD apart with
non-adjacent registers, on thumb2 this is not necessary.
Ideally on thumb2 we shouldn't match for ldrd/strd pre-regalloc anymore
as there is not reason to set register hints anymore, changing that is
something for a future patch however.
Matthias Braun [Mon, 1 Jun 2015 22:31:17 +0000 (22:31 +0000)]
AArch64: Use CMP;CCMP sequences for and/or/setcc trees.
Previously CCMP/FCCMP instructions were only used by the
AArch64ConditionalCompares pass for control flow. This patch uses them
for SELECT like instructions as well by matching patterns in ISelLowering.
Owen Anderson [Mon, 1 Jun 2015 22:24:01 +0000 (22:24 +0000)]
Move the name pointer out of Value into a map that lives on the
LLVMContext. Production builds of clang do not set names on most
Value's, so this is wasted space on almost all subclasses of Value.
This reduces the size of all Value subclasses by 8 bytes on 64 bit
hosts.
The one tricky part of this change is averting compile time regression
by keeping Value::hasName() fast. This required stealing bits out of
NumOperands.
With this change, peak memory usage on verify-uselistorder-nodbg.lto.bc
is decreased by approximately 2.3% (~3MB absolute on my machine).
Matthias Braun [Mon, 1 Jun 2015 21:26:26 +0000 (21:26 +0000)]
LiveRangeEdit: Fix liveranges not shrinking on subrange kill.
If a dead instruction we may not only have a last-use in the main live
range but also in a subregister range if subregisters are tracked. We
need to partially rebuild live ranges in both cases.
The testcase only broke when subregister liveness was enabled. I
commited it in the current form because there is currently no flag to
enable/disable subregister liveness.
Frederic Riss [Mon, 1 Jun 2015 21:12:45 +0000 (21:12 +0000)]
[dsymutil] Use YAMLIO to dump debug map.
Doing so will allow us to also accept a YAML debug map in input as using
YAMLIO gives us the parsing for free. Being able to have textual debug
maps will in turn allow much more control over the tests, because 1/
no need to check-in a binary containing the debug map and 2/ it will allow
to use the same objects/IR files with made-up debug-maps to test
different scenari.
Make the C++ LTO API easier to use from C++ clients.
Start using C++ types such as StringRef and MemoryBuffer in the C++ LTO
API. In doing so, clarify the ownership of the native object file: the caller
now owns it, not the LTOCodeGenerator. The C libLTO library has been modified
to use a derived class of LTOCodeGenerator that owns the object file.
lit: Allow configurations to restrict the set of tests to run
By setting limit_to_features to a non empty list of features a configuration can
restrict the set of tests to run to only include tests that require a feature in
this list.
Owen Anderson [Mon, 1 Jun 2015 17:26:30 +0000 (17:26 +0000)]
Disable MachineSink on convergent operations, similar to how IR Sink is
restricted. No test because no in-tree target currently has convergent
MachineInstr's.
projects / llvm / log