Junio C Hamano [Mon, 20 Jun 2016 18:01:02 +0000 (11:01 -0700)]
Merge branch 'jc/clear-pathspec'
We usually call a function that clears the contents a data
structure X without freeing the structure itself clear_X(), and
call a function that does clear_X() and also frees it free_X().
free_pathspec() function has been renamed to clear_pathspec()
to avoid confusion.
* jc/clear-pathspec:
pathspec: rename free_pathspec() to clear_pathspec()
Junio C Hamano [Mon, 20 Jun 2016 18:01:01 +0000 (11:01 -0700)]
Merge branch 'et/pretty-format-c-auto'
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
Junio C Hamano [Mon, 20 Jun 2016 18:01:00 +0000 (11:01 -0700)]
Merge branch 'ew/daemon-socket-keepalive'
When "git daemon" is run without --[init-]timeout specified, a
connection from a client that silently goes offline can hang around
for a long time, wasting resources. The socket-level KEEPALIVE has
been enabled to allow the OS to notice such failed connections.
* ew/daemon-socket-keepalive:
daemon: enable SO_KEEPALIVE for all sockets
Junio C Hamano [Mon, 20 Jun 2016 18:01:00 +0000 (11:01 -0700)]
Merge branch 'ew/fast-import-unpack-limit'
"git fast-import" learned the same performance trick to avoid
creating too small a packfile as "git fetch" and "git push" have,
using *.unpackLimit configuration.
Junio C Hamano [Fri, 10 Jun 2016 17:58:55 +0000 (10:58 -0700)]
diff: disable compaction heuristic for now
http://lkml.kernel.org/g/20160610075043.GA13411@sigill.intra.peff.net
reports that a change to add a new "function" with common ending
with the existing one at the end of the file is shown like this:
def foo
do_foo_stuff()
+ common_ending()
+end
+
+def bar
+ do_bar_stuff()
+
common_ending()
end
when the new heuristic is in use. In reality, the change is to add
the blank line before "def bar" and everything below, which is what
the code without the new heuristic shows.
Disable the heuristics by default, and resurrect the documentation
for the option and the configuration variables, while clearly
marking the feature as still experimental.
Junio C Hamano [Mon, 6 Jun 2016 21:27:36 +0000 (14:27 -0700)]
Merge branch 'tb/core-eol-fix' into maint
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
Junio C Hamano [Mon, 6 Jun 2016 21:27:35 +0000 (14:27 -0700)]
Merge branch 'ar/diff-args-osx-precompose' into maint
Many commands normalize command line arguments from NFD to NFC
variant of UTF-8 on OSX, but commands in the "diff" family did
not, causing "git diff $path" to complain that no such path is
known to Git. They have been taught to do the normalization.
* ar/diff-args-osx-precompose:
diff: run arguments through precompose_argv
William Duclot [Fri, 3 Jun 2016 12:32:26 +0000 (14:32 +0200)]
userdiff: add built-in pattern for CSS
CSS is widely used, motivating it being included as a built-in pattern.
It must be noted that the word_regex for CSS (i.e. the regex defining
what is a word in the language) does not consider '.' and '#' characters
(in CSS selectors) to be part of the word. This behavior is documented
by the test t/t4018/css-rule.
The logic behind this behavior is the following: identifiers in CSS
selectors are identifiers in a HTML/XML document. Therefore, the '.'/'#'
character are not part of the identifier, but an indicator of the nature
of the identifier in HTML/XML (class or id). Diffing ".class1" and
".class2" must show that the class name is changed, but we still are
selecting a class.
Logic behind the "pattern" regex is:
1. reject lines ending with a colon/semicolon (properties)
2. if a line begins with a name in column 1, pick the whole line
Credits to Johannes Sixt (j6t@kdbg.org) for the pattern regex and most
of the tests.
Signed-off-by: William Duclot <william.duclot@ensimag.grenoble-inp.fr> Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Reviewed-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 3 Jun 2016 21:38:01 +0000 (14:38 -0700)]
Merge branch 'js/rebase-i-dedup-call-to-rerere'
"git rebase -i", after it fails to auto-resolve the conflict, had
an unnecessary call to "git rerere" from its very early days, which
was spotted recently; the call has been removed.
* js/rebase-i-dedup-call-to-rerere:
rebase -i: remove an unnecessary 'rerere' invocation
Junio C Hamano [Thu, 2 Jun 2016 21:09:22 +0000 (14:09 -0700)]
pathspec: rename free_pathspec() to clear_pathspec()
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Junio C Hamano [Wed, 1 Jun 2016 20:30:47 +0000 (13:30 -0700)]
t2300: run git-sh-setup in an environment that better mimics the real life
When we run scripted Porcelains, "git" potty has set up the $PATH by
prepending $GIT_EXEC_PATH, the path given by "git --exec-path=$there
$cmd", etc. already. Because of this, scripted Porcelains can
dot-source shell script library like git-sh-setup with simple dot
without specifying any path.
t2300 however dot-sources git-sh-setup without adjusting $PATH like
the real "git" potty does. This has not been a problem so far, but
once git-sh-setup wants to rely on the $PATH adjustment, just like
any scripted Porcelains already do, it would become one. It cannot
for example dot-source another shell library without specifying the
full path to it by prefixing $(git --exec-path).
Junio C Hamano [Wed, 1 Jun 2016 20:56:08 +0000 (13:56 -0700)]
t5500 & t7403: lose bash-ism "local"
In t5500::check_prot_host_port_path(), diagport is not a variable
used elsewhere and the function is not recursively called so this
can simply lose the "local", which may not be supported by shell
(besides, the function liberally clobbers other variables without
making them "local").
t7403::reset_submodule_urls() overrides the "root" variable used
in the test framework for no good reason; its use is not about
temporarily relocating where the test repositories are created.
This assignment can be made not to clobber the variable by moving
them into the subshells it already uses. Its value is always
$TRASH_DIRECTORY, so we could use it instead there, and this
function that is called only once and its two subshells may not be
necessary (instead, the caller can use "git -C $there config" and
set a value that is derived from $TRASH_DIRECTORY), but this is a
minimum fix that is needed to lose "local".
Helped-by: John Keeping <john@keeping.me.uk> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Wed, 1 Jun 2016 00:27:59 +0000 (17:27 -0700)]
submodule: remove bashism from shell script
Junio pointed out `relative_path` was using bashisms via the
local variables. As the longer term goal is to rewrite most of the
submodule code in C, do it now.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Tue, 31 May 2016 23:59:33 +0000 (16:59 -0700)]
submodule--helper: offer a consistent API
In 48308681 (2016-02-29, git submodule update: have a dedicated helper
for cloning), the helper communicated errors back only via exit code,
and dance with printing '#unmatched' in case of error was left to
git-submodule.sh as it uses the output of the helper and pipes it into
shell commands. This change makes the helper consistent by never
printing '#unmatched' in the helper but always handling these piping
issues in the actual shell script.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 1 Jun 2016 07:04:26 +0000 (03:04 -0400)]
test-lib: add in-shell "env" replacement
The one-shot environment variable syntax:
FOO=BAR some-program
is unportable when some-program is actually a shell
function, like test_must_fail (on some shells FOO remains
set after the function returns, and on others it does not).
We sometimes get around this by using env, like:
test_must_fail env FOO=BAR some-program
But that only works because test_must_fail's arguments are
themselves a command which can be run. You can't run:
env FOO=BAR test_must_fail some-program
because env does not know about our shell functions. So
there is no equivalent for test_commit, for example, and one
must resort to:
(
FOO=BAR
export FOO
test_commit
)
which is a bit verbose. Let's add a version of "env" that
works _inside_ the shell, by creating a subshell, exporting
variables from its argument list, and running the command.
Its use is demonstrated on a currently-unportable case in
t4014.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2016 21:09:46 +0000 (14:09 -0700)]
Merge branch 'sb/submodule-deinit-all' into maint
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
Junio C Hamano [Tue, 31 May 2016 21:08:27 +0000 (14:08 -0700)]
Merge branch 'jk/test-send-sh-x-trace-elsewhere' into maint
Running tests with '-x' option to trace the individual command
executions is a useful way to debug test scripts, but some tests
that capture the standard error stream and check what the command
said can be broken with the trace output mixed in. When running
our tests under "bash", however, we can redirect the trace output
to another file descriptor to keep the standard error of programs
being tested intact.
* jk/test-send-sh-x-trace-elsewhere:
test-lib: set BASH_XTRACEFD automatically
Junio C Hamano [Tue, 31 May 2016 21:08:26 +0000 (14:08 -0700)]
Merge branch 'js/name-rev-use-oldest-ref' into maint
"git describe --contains" often made a hard-to-justify choice of
tag to give name to a given commit, because it tried to come up
with a name with smallest number of hops from a tag, causing an old
commit whose close descendant that is recently tagged were not
described with respect to an old tag but with a newer tag. It did
not help that its computation of "hop" count was further tweaked to
penalize being on a side branch of a merge. The logic has been
updated to favor using the tag with the oldest tagger date, which
is a lot easier to explain to the end users: "We describe a commit
in terms of the (chronologically) oldest tag that contains the
commit."
* js/name-rev-use-oldest-ref:
name-rev: include taggerdate in considering the best name
Johannes Sixt [Fri, 27 May 2016 16:28:21 +0000 (18:28 +0200)]
rebase -i: remove an unnecessary 'rerere' invocation
Interactive rebase uses 'git cherry-pick' and 'git merge' to replay
commits. Both invoke the 'rerere' machinery when they fail due to merge
conflicts. Note that all code paths with these two commands also invoke
the shell function die_with_patch when the commands fail.
Since commit 629716d2 ("rerere: do use multiple variants") the second
operation of the rerere machinery can be observed by a duplicated
message "Recorded preimage for 'file'". This second operation records
the same preimage as the first one and, hence, only wastes cycles.
Remove the 'git rerere' invocation from die_with_patch.
Shell function die_with_patch can be called after the failure of
"git commit", too, which also calls into the rerere machinery, but it
does so only after a successful commit to record the resolution.
Therefore, it is wrong to call 'git rerere' from die_with_patch after
"git commit" fails.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 31 May 2016 19:40:54 +0000 (12:40 -0700)]
Merge branch 'jk/cat-file-buffered-batch-all'
"git cat-file --batch-all" has been sped up, by taking advantage
of the fact that it does not have to read a list of objects, in two
ways.
* jk/cat-file-buffered-batch-all:
cat-file: default to --buffer when --batch-all-objects is used
cat-file: avoid noop calls to sha1_object_info_extended
Junio C Hamano [Tue, 31 May 2016 19:40:53 +0000 (12:40 -0700)]
Merge branch 'fc/fast-import-broken-marks-file'
"git fast-import --export-marks" would overwrite the existing marks
file even when it makes a dump from its custom die routine.
Prevent it from doing so when we have an import-marks file but
haven't finished reading it.
* fc/fast-import-broken-marks-file:
fast-import: do not truncate exported marks file
Jordan DE GEA [Fri, 27 May 2016 13:17:08 +0000 (15:17 +0200)]
worktree: allow "-" short-hand for @{-1} in add command
Since `git worktree add` uses `git checkout` when `[<branch>]` is used,
and `git checkout -` is already supported, it makes sense to allow the
same shortcut in `git worktree add`.
Signed-off-by: Jordan DE GEA <jordan.de-gea@grenoble-inp.org> Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erwan Mathoniere [Tue, 31 May 2016 16:20:33 +0000 (18:20 +0200)]
Documentation: bold literals in man
Backticks are emphasized through monospaced styling in the HTML
version of Git documentation. But they were left unstyled in the
manual pages.
To make the man pages more comfortably read, `MAN_BOLD_LITERAL` was
added by 5121a6d (Documentation: option to render literal text as
bold for manpages, 2009-03-27). It allowed the user to build the
manpages with literals in bold style.
For precaution it was not set by default back then.
Since 79c461d (docs: default to more modern toolset, 2010-11-19), it
is assumed ASCIIDOC 8 and at least docbook-xsl 1.73 are used, so the
need for compatibility concern is much lessor now.
Remove `MAN_BOLD_LITERAL`, and typeset literals as bold by default .
Add `NO_MAN_BOLD_LITERAL`, a new Makefile option, disabling this
feature when defined.
Signed-off-by: Erwan MATHONIERE <erwan.mathoniere@grenoble-inp.org> Signed-off-by: Samuel GROOT <samuel.groot@grenoble-inp.org> Signed-off-by: Tom RUSSELLO <tom.russello@grenoble-inp.org> Signed-off-by: Matthieu MOY <matthieu.moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Antoine Queru [Tue, 31 May 2016 09:57:08 +0000 (11:57 +0200)]
upload-pack.c: use parse-options API
Use the parse-options API rather than a hand-rolled option parser.
Description for --stateless-rpc and --advertise-refs come from 42526b4 (Add stateless RPC options to upload-pack,
receive-pack, 2009-10-30).
Signed-off-by: Antoine Queru <antoine.queru@grenoble-inp.org> Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Tue, 31 May 2016 13:24:43 +0000 (15:24 +0200)]
Makefile: move 'ifdef DEVELOPER' after config.mak* inclusion
The DEVELOPER knob was introduced in 658df95 (add DEVELOPER makefile
knob to check for acknowledged warnings, 2016-02-25), and works well
when used as "make DEVELOPER=1", and when the configure script was not
used.
However, the advice given in CodingGuidelines to add DEVELOPER=1 to
config.mak does not: config.mak is included after testing for
DEVELOPER in the Makefile, and at least GNU Make's manual specifies
"Conditional directives are parsed immediately", hence the config.mak
declaration is not visible at the time the conditional is evaluated.
Also, when using the configure script to generate a
config.mak.autogen, the later file contained a "CFLAGS = <flags>"
initialization, which overrode the "CFLAGS += -W..." triggered by
DEVELOPER.
This patch fixes both issues.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
CLI commands which are mentioned in the readme are now formatted with
the Markdown code syntax to make the documentation more readable.
Signed-off-by: Benjamin Dopplinger <b.dopplinger@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 25 May 2016 22:54:02 +0000 (22:54 +0000)]
fast-import: invalidate pack_id references after loosening
When loosening a pack, the current pack_id gets reused when
checkpointing and the import does not terminate. This causes
problems after checkpointing as the object table, branch, and
tag lists still contains pre-checkpoint references to the
recycled pack_id.
Merely clearing the object_table as suggested by Jeff King in
http://mid.gmane.org/20160517121330.GA7346@sigill.intra.peff.net
is insufficient as the marks set still contains references
to object entries.
Wrong pack_id references branch and tags lists do not cause
errors, but can lead to misleading crash reports and core dumps,
so they are also invalidated.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Rappazzo [Fri, 27 May 2016 20:39:57 +0000 (16:39 -0400)]
Documentation: add instructions to help setup gmail 2FA
For those who use two-factor authentication with gmail, git-send-email
will not work unless it is setup with an app-specific password. The
example for setting up git-send-email for use with gmail will now
include information on generating and storing the app-specific password.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Edward Thomson [Fri, 27 May 2016 03:46:10 +0000 (22:46 -0500)]
format_commit_message: honor `color=auto` for `%C(auto)`
git-log(1) documents that when specifying the `%C(auto)` format
placeholder will "turn on auto coloring on the next %placeholders
until the color is switched again."
However, when `%C(auto)` is used, the present implementation will turn
colors on unconditionally (even if the color configuration is turned off
for the current context - for example, `--no-color` was specified or the
color is `auto` and the output is not a tty).
Update `format_commit_one` to examine the current context when a format
string of `%C(auto)` is specified, which ensures that we will not
unconditionally write colors. This brings that behavior in line with
the behavior of `%C(auto,<colorname>)`, and allows the user the ability
to specify that color should be displayed only when the output is a
tty.
Additionally, add a test for `%C(auto)` and update the existing tests
for `%C(auto,...)` as they were misidentified as being applicable to
`%C(auto)`.
Tests from Jeff King.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Edward Thomson <ethomson@edwardthomson.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes the history of a submodule is not considered important by
the projects upstream. To make it easier for downstream users, allow
a boolean field 'submodule.<name>.shallow' in .gitmodules, which can
be used to recommend whether upstream considers the history important.
This field is honored in the initial clone by default, it can be
ignored by giving the `--no-recommend-shallow` option.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Thu, 26 May 2016 21:59:42 +0000 (14:59 -0700)]
submodule-config: keep shallow recommendation around
The shallow field will be used in a later patch by `submodule update`.
To differentiate between the actual depth (which may be different),
we name it `recommend_shallow` as the field in the .gitmodules file
is only a recommendation by the project.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 26 May 2016 20:17:23 +0000 (13:17 -0700)]
Merge branch 'js/windows-dotgit' into maint
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
Junio C Hamano [Thu, 26 May 2016 20:17:22 +0000 (13:17 -0700)]
Merge branch 'kf/gpg-sig-verification-doc' into maint
Documentation for "git merge --verify-signatures" has been updated
to clarify that the signature of only the commit at the tip is
verified. Also the phrasing used for signature and key validity is
adjusted to align with that used by OpenPGP.
projects / git / log