Fix ecpg -? option on Windows, add -V alias for --version.
This makes the -? and -V options work consistently with other binaries.
--help and --version are now only recognized as the first option, i.e.
"ecpg --foobar --help" no longer prints the help, but that's consistent
with most of our other binaries, too.
Tom Lane [Fri, 16 Sep 2016 13:36:19 +0000 (09:36 -0400)]
Add debugging aid "bmsToString(Bitmapset *bms)".
This function has no direct callers at present, but it's convenient for
manual use in a debugger, rather than having to inspect memory and do
bit-counting in your head.
In passing, get rid of useless outBitmapset() wrapper around
_outBitmapset(); let's just export the function that does the work.
Likewise for outToken().
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Tom Lane [Thu, 15 Sep 2016 15:23:25 +0000 (11:23 -0400)]
Make min_parallel_relation_size's default value platform-independent.
The documentation states that the default value is 8MB, but this was
only true at BLCKSZ = 8kB, because the default was hard-coded as 1024.
Make the code match the docs by computing the default as 8MB/BLCKSZ.
Oversight in commit 75be66464, noted pursuant to a gripe from Peter E.
Robert Haas [Thu, 15 Sep 2016 13:22:52 +0000 (09:22 -0400)]
pg_buffercache: Allow huge allocations.
Otherwise, users who have configured shared_buffers >= 256GB won't
be able to use this module. There probably aren't many of those, but
it doesn't hurt anything to fix it so that it works.
Backpatch to 9.4, where MemoryContextAllocHuge was introduced. The
same problem exists in older branches, but there's no easy way to
fix it there.
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to all supported branches, per popular demand. In back-branches,
we still support OpenSSL 0.9.7 and above. OpenSSL 0.9.6 should still work
too, but I didn't test it. In master, we only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
The money type input function did not have any overflow checks at all.
There were some regression tests that purported to check for overflow,
but they actually checked for the overflow behavior of the int8 type
before casting to money. Remove those unnecessary checks and add some
that actually check the money input function.
Tom Lane [Tue, 13 Sep 2016 21:17:48 +0000 (17:17 -0400)]
Be pickier about converting between Name and Datum.
We were misapplying NameGetDatum() to plain C strings in some places.
This worked, because it was just a pointer cast anyway, but it's a type
cheat in some sense. Use CStringGetDatum instead, and modify the
NameGetDatum macro so it won't compile if applied to something that's
not a pointer to NameData. This should result in no changes to
generated code, but it is logically cleaner.
Tom Lane [Tue, 13 Sep 2016 17:54:24 +0000 (13:54 -0400)]
Improve parser's and planner's handling of set-returning functions.
Teach the parser to reject misplaced set-returning functions during parse
analysis using p_expr_kind, in much the same way as we do for aggregates
and window functions (cf commit eaccfded9). While this isn't complete
(it misses nesting-based restrictions), it's much better than the previous
error reporting for such cases, and it allows elimination of assorted
ad-hoc expression_returns_set() error checks. We could add nesting checks
later if it seems important to catch all cases at parse time.
There is one case the parser will now throw error for although previous
versions allowed it, which is SRFs in the tlist of an UPDATE. That never
behaved sensibly (since it's ill-defined which generated row should be
used to perform the update) and it's hard to see why it should not be
treated as an error. It's a release-note-worthy change though.
Also, add a new Query field hasTargetSRFs reporting whether there are
any SRFs in the targetlist (including GROUP BY/ORDER BY expressions).
The parser can now set that basically for free during parse analysis,
and we can use it in a number of places to avoid expression_returns_set
searches. (There will be more such checks soon.) In some places, this
allows decontorting the logic since it's no longer expensive to check for
SRFs in the tlist --- so I made the checks parallel to the handling of
hasAggs/hasWindowFuncs wherever it seemed appropriate.
catversion bump because adding a Query field changes stored rules.
Robert Haas [Tue, 13 Sep 2016 13:21:35 +0000 (09:21 -0400)]
Have heapam.h include lockdefs.h rather than lock.h.
lockdefs.h was only split from lock.h relatively recently, and
represents a minimal subset of the old lock.h. heapam.h only needs
that smaller subset, so adjust it to include only that. This requires
some corresponding adjustments elsewhere.
Andres Freund [Tue, 13 Sep 2016 02:01:16 +0000 (19:01 -0700)]
Remove user_relns() SRF from regression tests.
The output of the function changes whenever previous (or, as in this
case, concurrent) tests leave a table in place. That causes unneeded
churn.
This should fix failures due to the tests added bfe16d1a5, like on
lapwing, caused by the tsrf test running concurrently with misc. Those
could also have been addressed by using temp tables, but that test has
annoyed me before.
Andres Freund [Thu, 4 Aug 2016 01:29:42 +0000 (18:29 -0700)]
Add more tests for targetlist SRFs.
We're considering changing the implementation of targetlist SRFs
considerably, and a lot of the current behaviour isn't tested in our
regression tests. Thus it seems useful to increase coverage to avoid
accidental behaviour changes.
It's quite possible that some of the plans here will require adjustments
to avoid falling afoul of ordering differences (e.g. hashed group
bys). The buildfarm will tell us.
Reviewed-By: Tom Lane
Discussion: <20160827214829.zo2dfb5jaikii5nw@alap3.anarazel.de>
Tom Lane [Mon, 12 Sep 2016 23:19:24 +0000 (19:19 -0400)]
Docs: assorted minor cleanups.
Standardize on "user_name" for a field name in related examples in
ddl.sgml; before we had variously "user_name", "username", and "user".
The last is flat wrong because it conflicts with a reserved word.
Be consistent about entry capitalization in a table in func.sgml.
Kevin Grittner [Mon, 12 Sep 2016 14:22:57 +0000 (09:22 -0500)]
Fix recent commit for tab-completion of database template.
The details of commit 52803098ab26051c0c9802f3c19edffc90de8843 were
based on a misunderstanding of the role inheritance allowing use
of a database for a template. While the CREATEDB privilege is not
inherited, the database ownership is privileges are.
Pointed out by Vitaly Burovoy and Tom Lane.
Fix provided by Tom Lane, reviewed by Vitaly Burovoy.
Simon Riggs [Mon, 12 Sep 2016 07:57:14 +0000 (08:57 +0100)]
Identify walsenders in pg_stat_activity
Following 8299471c37fff0b walsender procs are now visible in pg_stat_activity.
Set query to ‘walsender’ for walsender procs to allow them to be identified.
Tom Lane [Sun, 11 Sep 2016 18:15:07 +0000 (14:15 -0400)]
Allow CREATE EXTENSION to follow extension update paths.
Previously, to update an extension you had to produce both a version-update
script and a new base installation script. It's become more and more
obvious that that's tedious, duplicative, and error-prone. This patch
attempts to improve matters by allowing the new base installation script
to be omitted. CREATE EXTENSION will install a requested version if it
can find a base script and a chain of update scripts that will get there.
As in the existing update logic, shorter chains are preferred if there's
more than one possibility, with an arbitrary tie-break rule for chains
of equal length.
Also adjust the pg_available_extension_versions view to show such versions
as installable.
While at it, refactor the code so that CASCADE processing works for
extensions requested during ApplyExtensionUpdates(). Without this,
addition of a new requirement in an updated extension would require
creating a new base script, even if there was no other reason to do that.
(It would be easy at this point to add a CASCADE option to ALTER EXTENSION
UPDATE, to allow the same thing to happen during a manually-commanded
version update, but I have not done that here.)
Tom Lane [Sun, 11 Sep 2016 16:46:55 +0000 (12:46 -0400)]
Fix and simplify MSVC build's handling of xml/xslt/uuid dependencies.
Solution.pm mistakenly believed that the xml option requires the xslt
option, when actually the dependency is the other way around; and it
believed that libxml requires libiconv, which is not necessarily so,
so we shouldn't enforce it here. Fix the option cross-checking logic.
Also, since AddProject already takes care of adding libxml and libxslt
include and library dependencies to every project, there's no need
for the custom code that did that in mkvcbuild. While at it, let's
handle the similar dependencies for uuid in a similar fashion.
Given the lack of field complaints about these overly strict build
dependency requirements, there seems no need for a back-patch.
Implement binary heap replace-top operation in a smarter way.
In external sort's merge phase, we maintain a binary heap holding the next
tuple from each input tape. On each step, the topmost tuple is returned,
and replaced with the next tuple from the same tape. We were doing the
replacement by deleting the top node in one operation, and inserting the
next tuple after that. However, you can do a "replace-top" operation more
efficiently, in one "sift-up". A deletion will always walk the heap from
top to bottom, but in a replacement, we can stop as soon as we find the
right place for the new tuple. This is particularly helpful, if the tapes
are not in completely random order, so that the next tuple from a tape is
likely to land near the top of the heap.
Peter Geoghegan, reviewed by Claudio Freire, with some editing by me.
Tom Lane [Sat, 10 Sep 2016 21:54:23 +0000 (17:54 -0400)]
Improve unreachability recognition in elog() macro.
Some experimentation with an older version of gcc showed that it is able
to determine whether "if (elevel_ >= ERROR)" is compile-time constant
if elevel_ is declared "const", but otherwise not so much. We had
accounted for that in ereport() but were too miserly with braces to
make it so in elog(). I don't know how many currently-interesting
compilers have the same quirk, but in case it will save some code
space, let's make sure that elog() is on the same footing as ereport()
for this purpose.
Back-patch to 9.3 where we introduced pg_unreachable() calls into
elog/ereport.
Tom Lane [Sat, 10 Sep 2016 17:49:04 +0000 (13:49 -0400)]
Fix miserable coding in pg_stat_get_activity().
Commit dd1a3bccc replaced a test on whether a subroutine returned a
null pointer with a test on whether &pointer->backendStatus was null.
This accidentally failed to fail, at least on common compilers, because
backendStatus is the first field in the struct; but it was surely trouble
waiting to happen. Commit f91feba87 then messed things up further,
changing the logic to
local_beentry = pgstat_fetch_stat_local_beentry(curr_backend);
if (!local_beentry)
continue;
beentry = &local_beentry->backendStatus;
if (!beentry)
{
where the second "if" is now dead code, so that the intended behavior of
printing a row with "<backend information not available>" cannot occur.
I suspect this is all moot because pgstat_fetch_stat_local_beentry
will never actually return null in this function's usage, but it's still
very poor coding. Repair back to 9.4 where the original problem was
introduced.
Tom Lane [Fri, 9 Sep 2016 23:00:59 +0000 (19:00 -0400)]
Rewrite PageIndexDeleteNoCompact into a form that only deletes 1 tuple.
The full generality of deleting an arbitrary number of tuples is no longer
needed, so let's save some code and cycles by replacing the original coding
with an implementation based on PageIndexTupleDelete.
We can always get back the old code from git if we need it again for new
callers (though I don't care for its willingness to mess with line pointers
it wasn't told to mess with).
Tom Lane [Fri, 9 Sep 2016 22:17:07 +0000 (18:17 -0400)]
Convert PageAddItem into a macro to save a few cycles.
Nowadays this is just a backwards-compatibility wrapper around
PageAddItemExtended, so let's avoid the extra level of function call.
In addition, because pretty much all callers are passing constants
for the two bool arguments, compilers will be able to constant-fold
the conversion to a flags bitmask.
Tom Lane [Fri, 9 Sep 2016 22:02:24 +0000 (18:02 -0400)]
Invent PageIndexTupleOverwrite, and teach BRIN and GiST to use it.
PageIndexTupleOverwrite performs approximately the same function as
PageIndexTupleDelete (or PageIndexDeleteNoCompact) followed by PageAddItem
targeting the same item pointer offset. But in the case where the new
tuple is the same size as the old, it avoids shuffling other data around on
the page, because the new tuple is placed where the old one was rather than
being appended to the end of the page. This has been shown to provide a
substantial speedup for some GiST use-cases.
Also, this change allows some API simplifications: we can get rid of
the rather klugy and error-prone PAI_ALLOW_FAR_OFFSET flag for
PageAddItemExtended, since that was used only to cover a corner case
for BRIN that's better expressed by using PageIndexTupleOverwrite.
Note that this patch causes a rather subtle WAL incompatibility: the
physical page content change represented by certain WAL records is now
different than it was before, because while the tuples have the same
itempointer line numbers, the tuples themselves are in different places.
I have not bumped the WAL version number because I think it doesn't matter
unless you are trying to do bitwise comparisons of original and replayed
pages, and in any case we're early in a devel cycle and there will probably
be more WAL changes before v10 gets out the door.
There is probably room to make use of PageIndexTupleOverwrite in SP-GiST
and GIN too, but that is left for a future patch.
Andrey Borodin, reviewed by Anastasia Lubennikova, whacked around a bit
by me
Fix locking a tuple updated by an aborted (sub)transaction
When heap_lock_tuple decides to follow the update chain, it tried to
also lock any version of the tuple that was created by an update that
was subsequently rolled back. This is pointless, since for all intents
and purposes that tuple exists no more; and moreover it causes
misbehavior, as reported independently by Marko Tiikkaja and Marti
Raudsepp: some SELECT FOR UPDATE/SHARE queries may fail to return
the tuples, and assertion-enabled builds crash.
Fix by having heap_lock_updated_tuple test the xmin and return success
immediately if the tuple was created by an aborted transaction.
The condition where tuples become invisible occurs when an updated tuple
chain is followed by heap_lock_updated_tuple, which reports the problem
as HeapTupleSelfUpdated to its caller heap_lock_tuple, which in turn
propagates that code outwards possibly leading the calling code
(ExecLockRows) to believe that the tuple exists no longer.
Backpatch to 9.3. Only on 9.5 and newer this leads to a visible
failure, because of commit 27846f02c176; before that, heap_lock_tuple
skips the whole dance when the tuple is already locked by the same
transaction, because of the ancient HeapTupleSatisfiesUpdate behavior.
Still, the buggy condition may also exist in more convoluted scenarios
involving concurrent transactions, so it seems safer to fix the bug in
the old branches too.
Tom Lane [Fri, 9 Sep 2016 16:20:58 +0000 (12:20 -0400)]
In PageIndexTupleDelete, don't assume stored item lengths are MAXALIGNed.
PageAddItem stores the item length as-is. It MAXALIGN's the amount of
space actually allocated for each tuple, but not the stored length.
PageRepairFragmentation, PageIndexMultiDelete, and PageIndexDeleteNoCompact
are all on board with this and MAXALIGN item lengths after fetching them.
But PageIndexTupleDelete expects the stored length to be a MAXALIGN
multiple already. This accidentally works for existing index AMs because
they all maxalign their tuple sizes internally; but we don't do that for
heap tuples, and it shouldn't be a requirement for index tuples either.
So, sync PageIndexTupleDelete with the rest of bufpage.c by having it
maxalign the item size after fetching.
Also add a check that pd_special is maxaligned, to ensure that the test
"(offset + size) > phdr->pd_special" is still doing the right thing.
(If offset and pd_special are aligned, it doesn't matter whether size is.)
Again, this is in sync with the rest of the routines here, except for
PageAddItem which doesn't test because it doesn't actually do anything
for which pd_special alignment matters.
This shouldn't have any immediate functional impact; it just adds the
flexibility to use PageIndexTupleDelete on index tuples with non-aligned
lengths.
Peter Eisentraut [Thu, 18 Aug 2016 16:00:00 +0000 (12:00 -0400)]
Make better use of existing enums in plpgsql
plpgsql.h defines a number of enums, but most of the code passes them
around as ints. Update structs and function prototypes to take enum
types instead. This clarifies the struct definitions in plpgsql.h in
particular.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Tom Lane [Fri, 9 Sep 2016 13:20:34 +0000 (09:20 -0400)]
Avoid reporting "cache lookup failed" for some user-reachable cases.
We have a not-terribly-thoroughly-enforced-yet project policy that internal
errors with SQLSTATE XX000 (ie, plain elog) should not be triggerable from
SQL. record_in, domain_in, and PL validator functions all failed to meet
this standard, because they threw plain elog("cache lookup failed for XXX")
errors on bad OIDs, and those are all invokable from SQL.
For record_in, the best fix is to upgrade typcache.c (lookup_type_cache)
to throw a user-facing error for this case. That seems consistent because
it was more than halfway there already, having user-facing errors for shell
types and non-composite types. Having done that, tweak domain_in to rely
on the typcache to throw an appropriate error. (This costs little because
InitDomainConstraintRef would fetch the typcache entry anyway.)
For the PL validator functions, we already have a single choke point at
CheckFunctionValidatorAccess, so just fix its error to be user-facing.
Simon Riggs [Fri, 9 Sep 2016 10:55:12 +0000 (11:55 +0100)]
Fix corruption of 2PC recovery with subxacts
Reading 2PC state files during recovery was borked, causing corruptions during
recovery. Effect limited to servers with 2PC, subtransactions and
recovery/replication.
Stas Kelvich, reviewed by Michael Paquier and Pavan Deolasee
Andres Freund [Fri, 9 Sep 2016 00:02:43 +0000 (17:02 -0700)]
Improve scalability of md.c for large relations.
So far md.c used a linked list of segments. That proved to be a problem
when processing large relations, because every smgr.c/md.c level access
to a page incurred walking through a linked list of all preceding
segments. Thus making accessing pages O(#segments).
Replace the linked list of segments hanging off SMgrRelationData with an
array of opened segments. That allows O(1) access to individual
segments, if they've previously been opened.
Discussion: <20140331101001.GE13135@alap3.anarazel.de> Reviewed-By: Peter Geoghegan, Tom Lane (in an older version)
Andres Freund [Thu, 8 Sep 2016 23:51:09 +0000 (16:51 -0700)]
Fix mdtruncate() to close fd.c handle of deleted segments.
mdtruncate() forgot to FileClose() a segment's mdfd_vfd, when deleting
it. That lead to a fd.c handle to a truncated file being kept open until
backend exit.
The issue appears to have been introduced way back in 1a5c450f3024ac5,
before that the handle was closed inside FileUnlink().
The impact of this bug is limited - only VACUUM and ON COMMIT TRUNCATE
for temporary tables, truncate files in place (i.e. TRUNCATE itself is
not affected), and the relation has to be bigger than 1GB. The
consequences of a leaked fd.c handle aren't severe either.
Discussion: <20160908220748.oqh37ukwqqncbl3n@alap3.anarazel.de>
Backpatch: all supported releases
commit_ts and test_pg_dump were declaring targets before including the
PGXS stanza, which meant that the "all" target customarily defined as
the first (and therefore default target) was not the default anymore.
Fix that by moving those target definitions to after PGXS.
commit_ts was initially good, but I broke it in commit 9def031bd2;
test_pg_dump was born broken, probably copying from commit_ts' mistake.
In passing, fix a comment mistake in test_pg_dump/Makefile.
Tom Lane [Thu, 8 Sep 2016 17:12:01 +0000 (13:12 -0400)]
Allow pg_dump to dump non-extension members of an extension-owned schema.
Previously, if a schema was created by an extension, a normal pg_dump run
(not --binary-upgrade) would summarily skip every object in that schema.
In a case where an extension creates a schema and then users create other
objects within that schema, this does the wrong thing: we want pg_dump
to skip the schema but still create the non-extension-owned objects.
There's no easy way to fix this pre-9.6, because in earlier versions the
"dump" status for a schema is just a bool and there's no way to distinguish
"dump me" from "dump my members". However, as of 9.6 we do have enough
state to represent that, so this is a simple correction of the logic in
selectDumpableNamespace.
In passing, make some cosmetic fixes in nearby code.
Tom Lane [Thu, 8 Sep 2016 14:48:03 +0000 (10:48 -0400)]
Don't print database's tablespace in pg_dump -C --no-tablespaces output.
If the database has a non-default tablespace, we emitted a TABLESPACE
clause in the CREATE DATABASE command emitted by -C, even if
--no-tablespaces was also specified. This seems wrong, and it's
inconsistent with what pg_dumpall does, so change it. Per bug #14315
from Danylo Hlynskyi.
Back-patch to 9.5. The bug is much older, but it'd be a more invasive
change before 9.5 because dumpDatabase() hasn't got an easy way to get
to the outputNoTablespaces flag. Doesn't seem worth the work given
the lack of previous complaints.
Simon Riggs [Thu, 8 Sep 2016 09:32:58 +0000 (10:32 +0100)]
Fix minor memory leak in Standby startup
StandbyRecoverPreparedTransactions() leaked the buffer
used for two phase state file. This was leaked once
at startup and at every shutdown checkpoint seen.
MSVC: Place gendef.pl temporary file in the target directory.
Until now, it used the current working directory. This makes it safe
for simultaneous invocations of gendef.pl, with different target
directories, to run from a single current working directory, such as
$(top_srcdir). The MSVC build system will soon rely on this.
Tom Lane [Wed, 7 Sep 2016 20:11:56 +0000 (16:11 -0400)]
Support renaming an existing value of an enum type.
Not much to be said about this patch: it does what it says on the tin.
In passing, rename AlterEnumStmt.skipIfExists to skipIfNewValExists
to clarify what it actually does. In the discussion of this patch
we considered supporting other similar options, such as IF EXISTS
on the type as a whole or IF NOT EXISTS on the target name. This
patch doesn't actually add any such feature, but it might happen later.
Dagfinn Ilmari Mannsåker, reviewed by Emre Hasegeli
Tom Lane [Wed, 7 Sep 2016 17:36:08 +0000 (13:36 -0400)]
Doc: minor documentation improvements about extensions.
Document the formerly-undocumented behavior that schema and comment
control-file entries for an extension are honored only during initial
installation, whereas other properties are also honored during updates.
While at it, do some copy-editing on the recently-added docs for CREATE
EXTENSION ... CASCADE, use links for some formerly vague cross references,
and make a couple other minor improvements.
Back-patch to 9.6 where CASCADE was added. The other parts of this
could go further back, but they're probably not important enough to
bother.
Tom Lane [Wed, 7 Sep 2016 03:55:55 +0000 (23:55 -0400)]
Add a HINT for client-vs-server COPY failure cases.
Users often get confused between COPY and \copy and try to use client-side
paths with COPY. The server then cannot find the file (if remote), or sees
a permissions problem (if local), or some variant of that. Emit a hint
about this in the most common cases.
In future we might want to expand the set of errnos for which the hint
gets printed, but be conservative for now.
Craig Ringer, reviewed by Christoph Berg and Tom Lane
Add a location field to the DefElem struct, used to parse many utility
commands. Update various error messages to supply error position
information.
To propogate the error position information in a more systematic way,
create a ParseState in standard_ProcessUtility() and pass that to
interested functions implementing the utility commands. This seems
better than passing the query string and then reassembling a parse state
ad hoc, which violates the encapsulation of the ParseState type.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Tom Lane [Tue, 6 Sep 2016 19:50:31 +0000 (15:50 -0400)]
Guard against possible memory allocation botch in batchmemtuples().
Negative availMemLessRefund would be problematic. It's not entirely
clear whether the case can be hit in the code as it stands, but this
seems like good future-proofing in any case. While we're at it,
insist that the value be not merely positive but not tiny, so as to
avoid doing a lot of repalloc work for little gain.
Tom Lane [Tue, 6 Sep 2016 18:53:31 +0000 (14:53 -0400)]
Teach appendShellString() to not quote strings containing "-".
Brain fade in commit a00c58314: I was thinking that a string starting with
"-" could be taken as a switch depending on command line syntax. That's
true, but having appendShellString() quote it will not help, so we may as
well not do so. Per complaint from Peter Eisentraut.
Tom Lane [Tue, 6 Sep 2016 17:26:43 +0000 (13:26 -0400)]
Repair whitespace in initdb message.
What used to be four spaces somehow turned into a tab and a couple of
spaces in commit a00c58314, no doubt from overhelpful emacs autoindent.
Noted by Peter Eisentraut.
Tom Lane [Mon, 5 Sep 2016 22:53:25 +0000 (18:53 -0400)]
Cosmetic code cleanup in commands/extension.c.
Some of the comments added by the CREATE EXTENSION CASCADE patch were
a bit sloppy, and I didn't care for redeclaring the same local variable
inside a nested block either. No functional changes.
Tom Lane [Mon, 5 Sep 2016 21:06:29 +0000 (17:06 -0400)]
Make locale-dependent regex character classes work for large char codes.
Previously, we failed to recognize Unicode characters above U+7FF as
being members of locale-dependent character classes such as [[:alpha:]].
(Actually, the same problem occurs for large pg_wchar values in any
multibyte encoding, but UTF8 is the only case people have actually
complained about.) It's impractical to get Spencer's original code to
handle character classes or ranges containing many thousands of characters,
because it insists on considering each member character individually at
regex compile time, whether or not the character will ever be of interest
at run time. To fix, choose a cutoff point MAX_SIMPLE_CHR below which
we process characters individually as before, and deal with entire ranges
or classes as single entities above that. We can actually make things
cheaper than before for chars below the cutoff, because the color map can
now be a simple linear array for those chars, rather than the multilevel
tree structure Spencer designed. It's more expensive than before for
chars above the cutoff, because we must do a binary search in a list of
high chars and char ranges used in the regex pattern, plus call iswalpha()
and friends for each locale-dependent character class used in the pattern.
However, multibyte encodings are normally designed to give smaller codes
to popular characters, so that we can expect that the slow path will be
taken relatively infrequently. In any case, the speed penalty appears
minor except when we have to apply iswalpha() etc. to high character codes
at runtime --- and the previous coding gave wrong answers for those cases,
so whether it was faster is moot.
Tom Lane [Mon, 5 Sep 2016 16:59:55 +0000 (12:59 -0400)]
Relax transactional restrictions on ALTER TYPE ... ADD VALUE.
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Simon Riggs [Mon, 5 Sep 2016 08:44:38 +0000 (09:44 +0100)]
Dirty replication slots when using sql interface
When pg_logical_slot_get_changes(...) sets confirmed_flush_lsn to the point at
which replay stopped, it doesn't dirty the replication slot. So if the replay
didn't cause restart_lsn or catalog_xmin to change as well, this change will
not get written out to disk. Even on a clean shutdown.
If Pg crashes or restarts, a subsequent pg_logical_slot_get_changes(...) call
will see the same changes already replayed since it uses the slot's
confirmed_flush_lsn as the start point for fetching changes. The caller can't
specify a start LSN when using the SQL interface.
Mark the slot as dirty after reading changes using the SQL interface so that
users won't see repeated changes after a clean shutdown. Repeated changes still
occur when using the walsender interface or after an unclean shutdown.
Tom Lane [Mon, 5 Sep 2016 00:49:44 +0000 (20:49 -0400)]
Remove duplicate code from ReorderBufferCleanupTXN().
Andres is apparently the only hacker who thinks this code is better as-is.
I (tgl) follow some of his logic, but the fact that it's setting off
warnings from static code analyzers seems like a sufficient reason to
put the complexity into a comment rather than the code.
Tom Lane [Mon, 5 Sep 2016 00:02:16 +0000 (20:02 -0400)]
Add regression test coverage for non-default timezone abbreviation sets.
After further reflection about the mess cleaned up in commit 39b691f25,
I decided the main bit of test coverage that was still missing was to
check that the non-default abbreviation-set files we supply are usable.
Add that.
Back-patch to supported branches, just because it seems like a good
idea to keep this all in sync.
Tom Lane [Sun, 4 Sep 2016 23:42:08 +0000 (19:42 -0400)]
Remove vestigial references to "zic" in favor of "IANA database".
Commit b2cbced9e instituted a policy of referring to the timezone database
as the "IANA timezone database" in our user-facing documentation.
Propagate that wording into a couple of places that were still using "zic"
to refer to the database, which is definitely not right (zic is the
compilation tool, not the data).
Back-patch, not because this is very important in itself, but because
we routinely cherry-pick updates to the tznames files and I don't want
to risk future merge failures.
Tom Lane [Sun, 4 Sep 2016 16:33:58 +0000 (12:33 -0400)]
Remove useless pg_strdup() operations.
split_to_stringlist() doesn't modify its first argument nor expect it
to remain valid after exit, so there's no need to duplicate the optarg
string at the call sites. Per Coverity. (This has been wrong all along,
but commit 052cc223d changed the useless calls from "strdup" to
"pg_strdup", which apparently made Coverity think it's a new bug.
It's not, but it's also not worth back-patching.)
Clarify the new Red-Black post-order traversal code a bit.
Coverity complained about the for(;;) loop, because it never actually
iterated. It was used just to be able to use "break" to exit it early. I
agree with Coverity, that's a bit confusing, so refactor the code to
use if-else instead.
While we're at it, use a local variable to hold the "current" node. That's
shorter and clearer than referring to "iter->last_visited" all the time.
Tom Lane [Sat, 3 Sep 2016 19:29:03 +0000 (15:29 -0400)]
Improve readability of the output of psql's \timing command.
In addition to the existing decimal-milliseconds output value,
display the same value in mm:ss.fff format if it exceeds one second.
Tack on hours and even days fields if the interval is large enough.
This avoids needing mental arithmetic to convert the values into
customary time units.
Corey Huinker, reviewed by Gerdan Santos; bikeshedding by many
Tom Lane [Sat, 3 Sep 2016 17:28:53 +0000 (13:28 -0400)]
Fix corrupt GIN_SEGMENT_ADDITEMS WAL records on big-endian hardware.
computeLeafRecompressWALData() tried to produce a uint16 WAL log field by
memcpy'ing the first two bytes of an int-sized variable. That accidentally
works on little-endian hardware, but not at all on big-endian. Replay then
thinks it's looking at an ADDITEMS action with zero entries, and reads the
first two bytes of the first TID therein as the next segno/action,
typically leading to "unexpected GIN leaf action" errors during replay.
Even if replay failed to crash, the resulting GIN index page would surely
be incorrect. To fix, just declare the variable as uint16 instead.
Per bug #14295 from Spencer Thomason (much thanks to Spencer for turning
his problem into a self-contained test case). This likely also explains
a previous report of the same symptom from Bernd Helmle.
Back-patch to 9.4 where the problem was introduced (by commit 14d02f0bb).
Tom Lane [Fri, 2 Sep 2016 21:29:31 +0000 (17:29 -0400)]
Don't require dynamic timezone abbreviations to match underlying time zone.
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Move code shared between libpq and backend from backend/libpq/ to common/.
When building libpq, ip.c and md5.c were symlinked or copied from
src/backend/libpq into src/interfaces/libpq, but now that we have a
directory specifically for routines that are shared between the server and
client binaries, src/common/, move them there.
Some routines in ip.c were only used in the backend. Keep those in
src/backend/libpq, but rename to ifaddr.c to avoid confusion with the file
that's now in common.
Fix the comment in src/common/Makefile to reflect how libpq actually links
those files.
There are two more files that libpq symlinks directly from src/backend:
encnames.c and wchar.c. I don't feel compelled to move those right now,
though.
Patch by Michael Paquier, with some changes by me.
This introduces a numeric sum accumulator, which performs better than
repeatedly calling add_var(). The performance comes from using wider digits
and delaying carry propagation, tallying positive and negative values
separately, and avoiding a round of palloc/pfree on every value. This
speeds up SUM(), as well as other standard aggregates like AVG() and
STDDEV() that also calculate a sum internally.
Tom Lane [Thu, 1 Sep 2016 14:13:55 +0000 (10:13 -0400)]
Change API of ShmemAlloc() so it throws error rather than returning NULL.
A majority of callers seem to have believed that this was the API spec
already, because they omitted any check for a NULL result, and hence
would crash on an out-of-shared-memory failure. The original proposal
was to just add such error checks everywhere, but that does nothing to
prevent similar omissions in future. Instead, let's make ShmemAlloc()
throw the error (so we can remove the caller-side checks that do exist),
and introduce a new function ShmemAllocNoError() that has the previous
behavior of returning NULL, for the small number of callers that need
that and are prepared to do the right thing. This also lets us remove
the rather wishy-washy behavior of printing a WARNING for out-of-shmem,
which never made much sense: either the caller has a strategy for
dealing with that, or it doesn't. It's not ShmemAlloc's business to
decide whether a warning is appropriate.
The v10 release notes will need to call this out as a significant
source-code change. It's likely that it will be a bug fix for
extension callers too, but if not, they'll need to change to using
ShmemAllocNoError().
This is nominally a bug fix, but the odds that it's fixing any live
bug are actually rather small, because in general the requests
being made by the unchecked callers were already accounted for in
determining the overall shmem size, so really they ought not fail.
Between that and the possible impact on extensions, no back-patch.
Tom Lane [Wed, 31 Aug 2016 23:54:58 +0000 (19:54 -0400)]
Improve memory management for PL/Perl functions.
Unlike PL/Tcl, PL/Perl at least made an attempt to clean up after itself
when a function gets redefined. But it was still using TopMemoryContext
for the fn_mcxt of argument/result I/O functions, resulting in the
potential for memory leaks depending on what those functions did, and the
retail alloc/free logic was pretty bulky as well. Fix things to use a
per-function memory context like the other PLs now do. Tweak a couple of
places where things were being done in a not-very-safe order (on the
principle that a memory leak is better than leaving global state
inconsistent after an error). Also make some minor cosmetic adjustments,
mostly in field names, to make the code look similar to the way PL/Tcl does
now wherever it's essentially the same logic.
Tom Lane [Wed, 31 Aug 2016 21:27:09 +0000 (17:27 -0400)]
Improve memory management for PL/Tcl functions.
Formerly, the memory used to represent a PL/Tcl function was allocated with
malloc() or in TopMemoryContext, and we'd leak it all if the function got
redefined during the session. Instead, create a per-function context and
keep everything in or under that context. Add a reference-counting
mechanism (like the one plpgsql has long had) so that we can safely clean
up an old function definition, either immediately if it's not being
executed or at the end of the outermost execution.
Currently, we only detect that a cached function is obsolete when we next
attempt to call that function. So this covers the updated-definition case
but leaves cruft around after DROP FUNCTION. It's not clear whether it's
worth installing a syscache invalidation callback to watch for drops;
none of the other PLs do, so for now we won't do it here either.
Tom Lane [Wed, 31 Aug 2016 17:58:01 +0000 (13:58 -0400)]
Try to fix portability issue in enum renumbering (again).
The hack embodied in commit 4ba61a487 no longer works after today's change
to allow DatumGetFloat4/Float4GetDatum to be inlined (commit 14cca1bf8).
Probably what's happening is that the faulty compilers are deciding that
the now-inlined assignment is a no-op and so they're not required to
round to float4 width.
We had a bunch of similar issues earlier this year in the degree-based
trig functions, and eventually settled on using volatile intermediate
variables as the least ugly method of forcing recalcitrant compilers
to do what the C standard says (cf commit 82311bcdd). Let's see if
that method works here.
Use static inline functions for float <-> Datum conversions.
Now that we are OK with using static inline functions, we can use them
to avoid function call overhead of pass-by-val versions of Float4GetDatum,
DatumGetFloat8, and Float8GetDatum. Those functions are only a few CPU
instructions long, but they could not be written into macros previously,
because we need a local union variable for the conversion.
I kept the pass-by-ref versions as regular functions. They are very simple
too, but they call palloc() anyway, so shaving a few instructions from the
function call doesn't seem so important there.
Tom Lane [Wed, 31 Aug 2016 12:52:13 +0000 (08:52 -0400)]
Prevent starting a standalone backend with standby_mode on.
This can't really work because standby_mode expects there to be more
WAL arriving, which there will not ever be because there's no WAL
receiver process to fetch it. Moreover, if standby_mode is on then
hot standby might also be turned on, causing even more strangeness
because that expects read-only sessions to be executing in parallel.
Bernd Helmle reported a case where btree_xlog_delete_get_latestRemovedXid
got confused, but rather than band-aiding individual problems it seems
best to prevent getting anywhere near this state in the first place.
Back-patch to all supported branches.
In passing, also fix some omissions of errcodes in other ereport's in
readRecoveryCommandFile().
Tom Lane [Tue, 30 Aug 2016 22:22:43 +0000 (18:22 -0400)]
Fix a bunch of places that called malloc and friends with no NULL check.
Where possible, use palloc or pg_malloc instead; otherwise, insert
explicit NULL checks.
Generally speaking, these are places where an actual OOM is quite
unlikely, either because they're in client programs that don't
allocate all that much, or they're very early in process startup
so that we'd likely have had a fork() failure instead. Hence,
no back-patch, even though this is nominally a bug fix.
Tom Lane [Tue, 30 Aug 2016 21:02:02 +0000 (17:02 -0400)]
Simplify correct use of simple_prompt().
The previous API for this function had it returning a malloc'd string.
That meant that callers had to check for NULL return, which few of them
were doing, and it also meant that callers had to remember to free()
the string later, which required extra logic in most cases.
Instead, make simple_prompt() write into a buffer supplied by the caller.
Anywhere that the maximum required input length is reasonably small,
which is almost all of the callers, we can just use a local or static
array as the buffer instead of dealing with malloc/free.
A fair number of callers used "pointer == NULL" as a proxy for "haven't
requested the password yet". Maintaining the same behavior requires
adding a separate boolean flag for that, which adds back some of the
complexity we save by removing free()s. Nonetheless, this nets out
at a small reduction in overall code size, and considerably less code
than we would have had if we'd added the missing NULL-return checks
everywhere they were needed.
In passing, clean up the API comment for simple_prompt() and get rid
of a very-unnecessary malloc/free in its Windows code path.
This is nominally a bug fix, but it does not seem worth back-patching,
because the actual risk of an OOM failure in any of these places seems
pretty tiny, and all of them are client-side not server-side anyway.
This patch is by me, but it owes a great deal to Michael Paquier
who identified the problem and drafted a patch for fixing it the
other way.
Tom Lane [Tue, 30 Aug 2016 19:25:01 +0000 (15:25 -0400)]
Fix initdb misbehavior when user mis-enters superuser password.
While testing simple_prompt() revisions, I happened to notice that
current initdb behaves rather badly when --pwprompt is specified and
the user miskeys the second password. It complains about the mismatch,
does "rm -rf" on the data directory, and exits. The problem is that
since commit c4a8812cf, there's a standalone backend sitting waiting
for commands at that point. It gets unhappy about its datadir having
gone away, and spews a PANIC message at the user, which is not nice.
(And the shell then adds to the mess with meaningless bleating about a
core dump...) We don't really want that sort of thing to happen unless
there's an internal failure in initdb, which this surely is not.
The best fix seems to be to move the collection of the password
earlier, so that it's done essentially as part of argument collection,
rather than at the rather ad-hoc time it was done before.
Back-patch to 9.6 where the problem was introduced.
Alvaro Herrera [Mon, 29 Aug 2016 21:48:02 +0000 (18:48 -0300)]
Split hash.h → hash_xlog.h
Since the hash AM is going to be revamped to have WAL, this is a good
opportunity to clean up the include file a little bit to avoid including
a lot of extra stuff in the future.
Remove support for OpenSSL versions older than 0.9.8.
OpenSSL officially only supports 1.0.1 and newer. Some OS distributions
still provide patches for 0.9.8, but anything older than that is not
interesting anymore. Let's simplify things by removing compatibility code.
projects / postgresql / log