Michael Paquier [Sat, 4 May 2019 07:32:19 +0000 (16:32 +0900)]
Fix set of issues with memory-allocation system calls in frontend code
Like the backend, the frontend has wrappers on top of malloc() and such
whose use is recommended. Particularly, it is possible to do memory
allocation without issuing an error. Some binaries missed the use of
those wrappers, so let's fix the gap for consistency.
This also fixes two latent bugs:
- In pg_dump/pg_dumpall when parsing an ACL item, on an out-of-memory
error for strdup(), the code considered the failure as a ACL parsing
problem instead of an actual OOM.
- In pg_waldump, an OOM when building the target directory string would
cause a crash.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/gY0y9xenfoBPc-Tufsr2Zg-MmkrJslm0Tw_CMg4p_j58-k_PXNC0klMdkKQkg61BkXC9_uWo-DcUzfxnHqpkpoR5jjVZrPHqKYikcHIiONhg=@yesql.se
Peter Geoghegan [Fri, 3 May 2019 20:34:45 +0000 (13:34 -0700)]
Correct more obsolete nbtree page split comments.
Commit 3f342839 corrected obsolete comments about buffer locks at the
main _bt_insert_parent() call site, but missed similar obsolete comments
above _bt_insert_parent() itself. Both sets of comments were rendered
obsolete by commit 40dae7ec537, which made the nbtree page split
algorithm more robust. Fix the comments that were missed the first time
around now.
In passing, refine a related _bt_insert_parent() comment about
re-finding the parent page to insert new downlink.
Tom Lane [Fri, 3 May 2019 14:26:14 +0000 (10:26 -0400)]
Remove RelationSetIndexList().
In the wake of commit f912d7dec, RelationSetIndexList isn't used any
more. It was always a horrid wart, so getting rid of it is very nice.
We can also convert rd_indexvalid back to a plain boolean.
Tom Lane [Thu, 2 May 2019 23:11:28 +0000 (19:11 -0400)]
Fix reindexing of pg_class indexes some more.
Commits 3dbb317d3 et al failed under CLOBBER_CACHE_ALWAYS testing.
Investigation showed that to reindex pg_class_oid_index, we must
suppress accesses to the index (via SetReindexProcessing) before we call
RelationSetNewRelfilenode, or at least before we do CommandCounterIncrement
therein; otherwise, relcache reloads happening within the CCI may try to
fetch pg_class rows using the index's new relfilenode value, which is as
yet an empty file.
Of course, the point of 3dbb317d3 was that that ordering didn't work
either, because then RelationSetNewRelfilenode's own update of the index's
pg_class row cannot access the index, should it need to.
There are various ways we might have got around that, but Andres Freund
came up with a brilliant solution: for a mapped index, we can really just
skip the pg_class update altogether. The only fields it was actually
changing were relpages etc, but it was just setting them to zeroes which
is useless make-work. (Correct new values will be installed at the end
of index build.) All pg_class indexes are mapped and probably always will
be, so this eliminates the problem by removing work rather than adding it,
always a pleasant outcome. Having taught RelationSetNewRelfilenode to do
it that way, we can revert the code reordering in reindex_index. (But
I left the moved setup code where it was; there seems no reason why it
has to run without use of the old index. If you're trying to fix a
busted pg_class index, you'll have had to disable system index use
altogether to get this far.)
Moreover, this means we don't need RelationSetIndexList at all, because
reindex_relation's hacking to make "REINDEX TABLE pg_class" work is
likewise now unnecessary. We'll leave that code in place in the back
branches, but a follow-on patch will remove it in HEAD.
In passing, do some minor cleanup for commit 5c1560606 (in HEAD only),
notably removing a duplicate newrnode assignment.
Patch by me, using a core idea due to Andres Freund. Back-patch to all
supported branches, as 3dbb317d3 was.
Alvaro Herrera [Thu, 2 May 2019 20:13:48 +0000 (16:13 -0400)]
heap_prepare_freeze_tuple: Simplify coding
Commit d2599ecfcc74 introduced some contorted, confused code around:
readers would think that it's possible for HeapTupleHeaderGetXmin return
a non-frozen value for some frozen tuples, which would be disastrous.
There's no actual bug, but it seems better to make it clearer.
Per gripe from Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/30116.1555430496@sss.pgh.pa.us
Peter Geoghegan [Thu, 2 May 2019 19:33:35 +0000 (12:33 -0700)]
Fix nbtsort.c's page space accounting.
Commit dd299df8189, which made heap TID a tiebreaker nbtree index
column, introduced new rules on page space management to make suffix
truncation safe. In general, suffix truncation needs to have a small
amount of extra space available on the new left page when splitting a
leaf page. This is needed in case it turns out that truncation cannot
even "truncate away the heap TID column", resulting in a
larger-than-firstright leaf high key with an explicit heap TID
representation.
Despite all this, CREATE INDEX/nbtsort.c did not account for the
possible need for extra heap TID space on leaf pages when deciding
whether or not a new item could fit on current page. This could lead to
"failed to add item to the index page" errors when CREATE
INDEX/nbtsort.c tried to finish off a leaf page that lacked space for a
larger-than-firstright leaf high key (it only had space for firstright
tuple, which was just short of what was needed following "truncation").
Several conditions needed to be met all at once for CREATE INDEX to
fail. The problem was in the hard limit on what will fit on a page,
which tends to be masked by the soft fillfactor-wise limit. The easiest
way to recreate the problem seems to be a CREATE INDEX on a low
cardinality text column, with tuples that are of non-uniform width,
using a fillfactor of 100.
To fix, bring nbtsort.c in line with nbtsplitloc.c, which already
pessimistically assumes that all leaf page splits will have high keys
that have a heap TID appended.
Reported-By: Andreas Joseph Krogh
Discussion: https://postgr.es/m/VisenaEmail.c5.3ee7fe277d514162.16a6d785bea@tc7-visena
Robert Haas [Thu, 2 May 2019 14:07:13 +0000 (10:07 -0400)]
Fix some problems with VACUUM (INDEX_CLEANUP FALSE).
The new nleft_dead_tuples and nleft_dead_itemids fields are confusing
and do not seem like the correct way forward. One of them is tested
via an assertion that can fail, as it has already done on buildfarm
member topminnow. Remove the assertion and the fields.
Change the logic for the case where a tuple is not initially pruned
by heap_page_prune but later diagnosed HEAPTUPLE_DEAD by
HeapTupleSatisfiesVacuum. Previously, tupgone = true was set in
that case, which leads to treating the tuple as one that will be
removed. In a normal vacuum, that's OK, because we'll remove
index entries for it and then the second heap pass will remove the
tuple itself, but when index cleanup is disabled, those things
don't happen, so we must instead treat it as a recently-dead
tuple that we have voluntarily chosen to keep.
Report and analysis by Tom Lane. This patch loosely based on one
from Masahiko Sawada, but I changed most of it.
Magnus Hagander [Wed, 1 May 2019 10:30:44 +0000 (12:30 +0200)]
Fix union for pgstat message types
The message type for temp files and for checksum failures were missing
from the union. Due to the coding style used there was no compiler error
when this happend. So change the code to actively use the union thereby
producing a compiler error if the same mistake happens again, suggested
by Tom Lane.
Author: Julien Rouhaud Reported-By: Tomas Vondra
Discussion: https://postgr.es/m/20190430163328.zd4rrlnbvgaqlcdz@development
Andres Freund [Wed, 1 May 2019 00:45:32 +0000 (17:45 -0700)]
Run catalog reindexing test from 3dbb317d32 serially, to avoid deadlocks.
The tests turn out to cause deadlocks in some circumstances. Fairly
reproducibly so with -DRELCACHE_FORCE_RELEASE
-DCATCACHE_FORCE_RELEASE. Some of the deadlocks may be hard to fix
without disproportionate measures, but others probably should be fixed
- but not in 12.
We discussed removing the new tests until we can fix the issues
underlying the deadlocks, but results from buildfarm animal
markhor (which runs with CLOBBER_CACHE_ALWAYS) indicates that there
might be a more severe, as of yet undiagnosed, issue (including on
stable branches) with reindexing catalogs. The failure is:
ERROR: could not read block 0 in file "base/16384/28025": read only 0 of 8192 bytes
Therefore it seems advisable to keep the tests.
It's not certain that running the tests in isolation removes the risk
of deadlocks. It's possible that additional locks are needed to
protect against a concurrent auto-analyze or such.
Per discussion with Tom Lane.
Discussion: https://postgr.es/m/28926.1556664156@sss.pgh.pa.us
Backpatch: 9.4-, like 3dbb317d3
Andres Freund [Tue, 30 Apr 2019 22:55:07 +0000 (15:55 -0700)]
Improve code inferring length of bitmap for JITed tuple deforming.
While discussing comment improvements (see next commit) by Justin
Pryzby, Tom complained about a few details of the logic to infer the
length of the NULL bitmap when building the JITed tuple deforming
function. That bitmap allows to avoid checking the tuple header's
natts, a check which often causes a pipeline stall
Improvements:
a) As long as missing columns aren't taken into account, we can
continue to infer the length of the NULL bitmap from NOT NULL
columns following it. Previously we stopped at the first missing
column. It's unlikely to matter much in practice, but the
alternative would have been to document why we stop.
b) For robustness reasons it seems better to also check against
attisdropped - RemoveAttributeById() sets attnotnull to false, but
an additional check is trivial.
c) Improve related comments
Tom Lane [Tue, 30 Apr 2019 19:03:35 +0000 (15:03 -0400)]
Clean up handling of constraint_exclusion and enable_partition_pruning.
The interaction of these parameters was a bit confused/confusing,
and in fact v11 entirely misses the opportunity to apply partition
constraints when a partition is accessed directly (rather than
indirectly from its parent).
In HEAD, establish the principle that enable_partition_pruning controls
partition pruning and nothing else. When accessing a partition via its
parent, we do partition pruning (if enabled by enable_partition_pruning)
and then there is no need to consider partition constraints in the
constraint_exclusion logic. When accessing a partition directly, its
partition constraints are applied by the constraint_exclusion logic,
only if constraint_exclusion = on.
In v11, we can't have such a clean division of these GUCs' effects,
partly because we don't want to break compatibility too much in a
released branch, and partly because the clean coding requires
inheritance_planner to have applied partition pruning to a partitioned
target table, which it doesn't in v11. However, we can tweak things
enough to cover the missed case, which seems like a good idea since
it's potentially a performance regression from v10. This patch keeps
v11's previous behavior in which enable_partition_pruning overrides
constraint_exclusion for an inherited target table, though.
In HEAD, also teach relation_excluded_by_constraints that it's okay to use
inheritable constraints when trying to prune a traditional inheritance
tree. This might not be thought worthy of effort given that that feature
is semi-deprecated now, but we have enough infrastructure that it only
takes a couple more lines of code to do it correctly.
Andres Freund [Tue, 30 Apr 2019 02:42:04 +0000 (19:42 -0700)]
Fix potential assertion failure when reindexing a pg_class index.
When reindexing individual indexes on pg_class it was possible to
either trigger an assertion failure:
TRAP: FailedAssertion("!(!ReindexIsProcessingIndex(((index)->rd_id)))
That's because reindex_index() called SetReindexProcessing() - which
enables an asserts ensuring no index insertions happen into the index
- before calling RelationSetNewRelfilenode(). That not correct for
indexes on pg_class, because RelationSetNewRelfilenode() updates the
relevant pg_class row, which needs to update the indexes.
The are two reasons this wasn't noticed earlier. Firstly the bug
doesn't trigger when reindexing all of pg_class, as reindex_relation
has code "hiding" all yet-to-be-reindexed indexes. Secondly, the bug
only triggers when the the update to pg_class doesn't turn out to be a
HOT update - otherwise there's no index insertion to trigger the
bug. Most of the time there's enough space, making this bug hard to
trigger.
To fix, move RelationSetNewRelfilenode() to before the
SetReindexProcessing() (and, together with some other code, to outside
of the PG_TRY()).
To make sure the error checking intended by SetReindexProcessing() is
more robust, modify CatalogIndexInsert() to check
ReindexIsProcessingIndex() even when the update is a HOT update.
Also add a few regression tests for REINDEXing of system catalogs.
The last two improvements would have prevented some of the issues
fixed in 5c1560606dc4c from being introduced in the first place.
Reported-By: Michael Paquier Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
Backpatch: 9.4-, the bug is present in all branches
Andres Freund [Tue, 30 Apr 2019 02:28:05 +0000 (19:28 -0700)]
Fix several recently introduced issues around handling new relation forks.
Most of these stem from d25f519107 "tableam: relation creation, VACUUM
FULL/CLUSTER, SET TABLESPACE.".
1) To pass data to the relation_set_new_filenode()
RelationSetNewRelfilenode() was made to update RelationData.rd_rel
directly. That's not OK however, as it makes the relcache entries
temporarily inconsistent. Which among other scenarios is a problem
if a REINDEX targets an index on pg_class - the
CatalogTupleUpdate() in RelationSetNewRelfilenode(). Presumably
that was introduced because other places in the code do so - while
those aren't "good practice" they don't appear to be actively
buggy (e.g. because system tables may not be targeted).
I (Andres) should have caught this while reviewing and signficantly
evolving the code in that commit, mea culpa.
Fix that by instead passing in the new RelFileNode as separate
argument to relation_set_new_filenode() and rely on the relcache to
update the catalog entry. Also revert that the
RelationMapUpdateMap() call was changed to immediate, and undo some
other more unnecessary changes.
2) Document that the relation_set_new_filenode cannot rely on the
whole relcache entry to be valid. It might be worthwhile to
refactor the code to never have to rely on that, but given the way
heap_create() is currently coded, that'd be a large change.
3) ATExecSetTableSpace() shouldn't do FlushRelationBuffers() itself. A
table AM might not use shared buffers at all. Move to
index_copy_data() and heapam_relation_copy_data().
4) heapam_relation_set_new_filenode() previously sometimes accessed
rel->rd_rel->relpersistence rather than the `persistence`
argument. Code movement mistake.
5) Previously heapam_relation_set_new_filenode() re-opened the smgr
relation to create the init for, if necesary. Instead have
RelationCreateStorage() return the SMgrRelation and use it to
create the init fork.
6) Add a note about the danger of modifying the relcache directly to
ATExecSetTableSpace() - it's currently not a bug because there's a
check ERRORing for catalog tables.
Regression tests and assertion improvements that together trigger the
bug described in 1) will be added in a later commit, as there is a
related bug on all branches.
Reported-By: Michael Paquier Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
Peter Geoghegan [Mon, 29 Apr 2019 21:14:38 +0000 (14:14 -0700)]
Remove obsolete _bt_insert_parent() comment.
Remove a comment that refers to a coding practice that was fully removed
by commit a8b8f4db, which introduced MarkBufferDirty(). It looks like
the comment was even obsolete before then, since it concerns
write-ordering dependencies with synchronous buffer writes.
Tom Lane [Mon, 29 Apr 2019 16:26:07 +0000 (12:26 -0400)]
In walreceiver, don't try to do ereport() in a signal handler.
This is quite unsafe, even for the case of ereport(FATAL) where we won't
return control to the interrupted code, and despite this code's use of
a flag to restrict the areas where we'd try to do it. It's possible
for example that we interrupt malloc or free while that's holding a lock
that's meant to protect against cross-thread interference. Then, any
attempt to do malloc or free within ereport() will result in a deadlock,
preventing the walreceiver process from exiting in response to SIGTERM.
We hypothesize that this explains some hard-to-reproduce failures seen
in the buildfarm.
Hence, get rid of the immediate-exit code in WalRcvShutdownHandler,
as well as the logic associated with WalRcvImmediateInterruptOK.
Instead, we need to take care that potentially-blocking operations
in the walreceiver's data transmission logic (libpqwalreceiver.c)
will respond reasonably promptly to the process's latch becoming
set and then call ProcessWalRcvInterrupts. Much of the needed code
for that was already present in libpqwalreceiver.c. I refactored
things a bit so that all the uses of PQgetResult use latch-aware
waiting, but didn't need to do much more.
These changes should be enough to ensure that libpqwalreceiver.c
will respond promptly to SIGTERM whenever it's waiting to receive
data. In principle, it could block for a long time while waiting
to send data too, and this patch does nothing to guard against that.
I think that that hazard is mostly theoretical though: such blocking
should occur only if we fill the kernel's data transmission buffers,
and we don't generally send enough data to make that happen without
waiting for input. If we find out that the hazard isn't just
theoretical, we could fix it by using PQsetnonblocking, but that
would require more ticklish changes than I care to make now.
This is a bug fix, but it seems like too big a change to push into
the back branches without much more testing than there's time for
right now. Perhaps we'll back-patch once we have more confidence
in the change.
Michael Paquier [Mon, 29 Apr 2019 14:52:42 +0000 (23:52 +0900)]
Fix some typos
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/42kEeWei6VxLGh12QbR08hiI5Pm-c3XgbK7qj393PSttEhVbnnQoFXHKzXjPRZLUpndWAfHIuZuUqGZBzyXadmEUCSqm9xphWur_I8vESMA=@yesql.se
Peter Eisentraut [Mon, 29 Apr 2019 06:44:51 +0000 (08:44 +0200)]
Fix potential catalog corruption with temporary identity columns
If a temporary table with an identity column and ON COMMIT DROP is
created in a single-statement transaction (not useful, but allowed),
it would leave the catalog corrupted. We need to add a
CommandCounterIncrement() so that PreCommit_on_commit_actions() sees
the created dependency between table and sequence and can clean it
up.
The analogous and more useful case of doing this in a transaction
block already runs some CommandCounterIncrement() before it gets to
the on-commit cleanup, so it wasn't a problem in practical use.
Several locations for placing the new CommandCounterIncrement() call
were discussed. This patch places it at the end of
standard_ProcessUtility(). That would also help if other commands
were to create catalog entries that some on-commit action would like
to see.
Bug: #15631 Reported-by: Serge Latyntsev <dnsl48@gmail.com>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> Reviewed-by: Michael Paquier <michael@paquier.xyz>
Tom Lane [Sun, 28 Apr 2019 21:16:50 +0000 (17:16 -0400)]
Do pre-release housekeeping on catalog data, and fix jsonpath send/recv.
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. (The only change is 8394 -> 3428.)
Also run reformat_dat_file.pl while I'm here.
While looking at the reformat diffs, I chanced to notice that type
jsonpath had typsend and typreceive = '-', which surely is not the
intention given that jsonpath_send and jsonpath_recv exist.
Fix that. It's safe to assume that these functions have never been
tested :-(. I didn't try, but somebody should.
Tom Lane [Sun, 28 Apr 2019 16:45:55 +0000 (12:45 -0400)]
Clean up minor warnings from buildfarm.
Be more consistent about use of XXXGetDatum macros in new jsonpath
code. This is mostly to avoid having code that looks randomly
different from everyplace else that's doing the exact same thing.
In pg_regress.c, avoid an unreferenced-function warning from
compilers that don't understand pg_attribute_unused(). Putting
the function inside the same #ifdef as its only caller is more
straightforward coding anyway.
In be-secure-openssl.c, avoid use of pg_attribute_unused() on a label.
That's pretty creative, but there's no good reason to suppose that
it's portable, and there's absolutely no need to use goto's here in the
first place. (This wasn't actually causing any buildfarm complaints,
but it's new code in v12 so it has no portability track record.)
Michael Paquier [Sun, 28 Apr 2019 13:53:33 +0000 (22:53 +0900)]
Fix more typos and inconsistencies in documentation
This fixes a couple of grammar mistakes, typos and inconsistencies in
the documentation. Particularly, the configuration parsing allows only
"kB" to mean kilobyte but there were references in the docs to "KB".
Some instances of the latter are still in the code comments. Some
parameter values were mentioned with "Minus-one", and using directly
"-1" with proper markups is more helpful to the reader.
Some of these have been pointed out by Justin, and some others are
things I bumped into.
Author: Justin Pryzby, Michael Paquier Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20190330224333.GQ5815@telsasoft.com
Tom Lane [Sat, 27 Apr 2019 17:15:54 +0000 (13:15 -0400)]
Avoid postgres_fdw crash for a targetlist entry that's just a Param.
foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Joe Conway [Sat, 27 Apr 2019 15:12:52 +0000 (11:12 -0400)]
Add guidance on making documentation SVG images responsive
Recently added guidance on adding SVG images to the documentation
sources lacks advice on making the images responsive when rendered
in a variety of media types and viewports. Add some.
Patch by Jonathan Katz with some editorialization by me.
Author: Jonathan Katz
Discussion: https://postgr.es/m/6358ae6f-7191-a02b-e7b5-68050636ae71@postgresql.org
Michael Paquier [Sat, 27 Apr 2019 00:06:39 +0000 (09:06 +0900)]
Mention REINDEX CONCURRENTLY in documentation about index maintenance
The documentation includes a section about index maintenance and
reindexing, mentioning a set of steps based on CREATE INDEX CONCURRENTLY
and ALTER TABLE (for constraint dependencies) to emulate REINDEX
CONCURRENTLY. Now that REINDEX CONCURRENTLY is supported, let's just
directly mention it instead.
Reported-by: Peter Geoghegan
Author: Michael Paquier Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/CAH2-WzmEL168t6w29aKrKXtpq9-apcmp0HC7K-fKt6ZgLXV6Dg@mail.gmail.com
Tom Lane [Fri, 26 Apr 2019 23:46:26 +0000 (19:46 -0400)]
Sync our copy of the timezone library with IANA release tzcode2019a.
This corrects a small bug in zic that caused it to output an incorrect
year-2440 transition in the Africa/Casablanca zone.
More interestingly, zic has grown a "-r" option that limits the range of
zone transitions that it will put into the output files. That might be
useful to people who don't like the weird GMT offsets that tzdb likes
to use for very old dates. It appears that for dates before the cutoff
time specified with -r, zic will use the zone's standard-time offset
as of the cutoff time. So for example one might do
to cause all dates before 1910-01-01 to be treated as though 1910
standard time prevailed indefinitely far back. (Don't blame me for
the unfriendly way of specifying the cutoff time --- it's seconds
since or before the Unix epoch. You can use extract(epoch ...)
to calculate it.)
Tom Lane [Fri, 26 Apr 2019 21:56:26 +0000 (17:56 -0400)]
Update time zone data files to tzdata release 2019a.
DST law changes in Palestine and Metlakatla.
Historical corrections for Israel.
Etc/UCT is now a backward-compatibility link to Etc/UTC, instead
of being a separate zone that generates the abbreviation "UCT",
which nowadays is typically a typo. Postgres will still accept
"UCT" as an input zone name, but it won't output it.
Tom Lane [Fri, 26 Apr 2019 21:18:07 +0000 (17:18 -0400)]
Apply stopgap fix for bug #15672.
Fix DefineIndex so that it doesn't attempt to pass down a to-be-reused
index relfilenode to a child index creation, and fix TryReuseIndex
to not think that reuse is sensible for a partitioned index.
In v11, this fixes a problem where ALTER TABLE on a partitioned table
could assign the same relfilenode to several different child indexes,
causing very nasty catalog corruption --- in fact, attempting to DROP
the partitioned table then leads not only to a database crash, but to
inability to restart because the same crash will recur during WAL replay.
Either of these two changes would be enough to prevent the failure, but
since neither action could possibly be sane, let's put in both changes
for future-proofing.
In HEAD, no such bug manifests, but that's just an accidental consequence
of having changed the pg_class representation of partitioned indexes to
have relfilenode = 0. Both of these changes still seem like smart
future-proofing.
This is only a stop-gap because the code for ALTER TABLE on a partitioned
table with a no-op type change still leaves a great deal to be desired.
As the added regression tests show, it gets things wrong for comments on
child indexes/constraints, and it is regenerating child indexes it doesn't
have to. However, fixing those problems will take more work which may not
get back-patched into v11. We need a fix for the corruption problem now.
Per bug #15672 from Jianing Yang.
Patch by me, regression test cases based on work by Amit Langote,
who also did a lot of the investigative work.
pg_dump: store unused attribs as NULL instead of '\0'
Commit f831d4accda0 changed pg_dump to emit (and pg_restore to
understand) NULLs for unused members in ArchiveEntry structs, as a side
effect of some code beautification. That broke pg_restore of dumps
generated with older pg_dump, however, so it was reverted in 19455c9f5606. Since the archiver version number has been bumped in 3b925e905de3, we can put it back.
Add FDW documentation notes about insert and update tuple routing and COPY.
Author: Laurenz Albe and Etsuro Fujita Reviewed-by: Laurenz Albe and Amit Langote
Backpatch-through: 11 where support for that by FDWs was added
Discussion: https://postgr.es/m/bf36a0288e8f31b4f2f40952e225bf892dc1ffc5.camel@cybertec.at
Peter Geoghegan [Thu, 25 Apr 2019 19:50:37 +0000 (12:50 -0700)]
Sanitize line pointers within contrib/amcheck.
Adopt a more defensive approach to accessing index tuples in
contrib/amcheck: verify that each line pointer looks sane before
accessing associated tuple using pointer arithmetic based on line
pointer's offset. This avoids undefined behavior and assertion failures
in cases where line pointers are corrupt.
Issue spotted following a complaint about an assertion failure by
Grigory Smolkin, which involved a test harness that deliberately
corrupts indexes.
This is arguably a bugfix, but no backpatch given the lack of field
reports beyond Grigory's.
When an existing index in a partition is attached to a new index on
its parent, we forgot to set the "relispartition" flag correctly, which
meant that it was not possible to find the index in various operations,
such as adding a foreign key constraint that references that partitioned
table. One of four places that was assigning the parent index was
forgetting to do that, so fix by shifting responsibility of updating the
flag to the routine that changes the parent.
Commit 3eb77eba5a renamed some functions, but forgot to
update some comments referencing to those functions.
This commit fixes those function names in the comments.
Commit ca4103025dfe left a few loose ends. The most important one
(broken pg_dump output) is already fixed by virtue of commit 3b23552ad8bb, but some things remained:
* When ALTER TABLE rewrites tables, the indexes must remain in the
tablespace they were originally in. This didn't work because
index recreation during ALTER TABLE runs manufactured SQL (yuck),
which runs afoul of default_tablespace in competition with the parent
relation tablespace. To fix, reset default_tablespace to the empty
string temporarily, and add the TABLESPACE clause as appropriate.
* Setting a partitioned rel's tablespace to the database default is
confusing; if it worked, it would direct the partitions to that
tablespace regardless of default_tablespace. But in reality it does
not work, and making it work is a larger project. Therefore, throw
an error when this condition is detected, to alert the unwary.
Make pg_dump emit ATTACH PARTITION instead of PARTITION OF
Using PARTITION OF can result in column ordering being changed from the
database being dumped, if the partition uses a column layout different
from the parent's. It's not pg_dump's job to editorialize on table
definitions, so this is not acceptable; back-patch all the way back to
pg10, where partitioned tables where introduced.
This change also ensures that partitions end up in the correct
tablespace, if different from the parent's; this is an oversight in ca4103025dfe (in pg12 only). Partitioned indexes (in pg11) don't have
this problem, because they're already created as independent indexes and
attached to their parents afterwards.
This change also has the advantage that the partition is restorable from
the dump (as a standalone table) even if its parent table isn't
restored.
Author: David Rowley Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f_1c260nOt_vBJ067AZ3JXptXVRohDVMLEBmudX1YEx-A@mail.gmail.com
Discussion: https://postgr.es/m/20190423185007.GA27954@alvherre.pgsql
Tom Lane [Wed, 24 Apr 2019 18:15:44 +0000 (14:15 -0400)]
Fix some minor postmaster-state-machine issues.
In sigusr1_handler, don't ignore PMSIGNAL_ADVANCE_STATE_MACHINE based
on pmState. The restriction is unnecessary (PostmasterStateMachine
should work in any state), not future-proof (since it makes too many
assumptions about why the signal might be sent), and broken even today
because a race condition can make it necessary to respond to the signal
in PM_WAIT_READONLY state. The race condition seems unlikely, but
if it did happen, a hot-standby postmaster could fail to shut down
after receiving a smart-shutdown request.
In MaybeStartWalReceiver, don't clear the WalReceiverRequested flag
if the fork attempt fails. Leaving it set allows us to try
again in future iterations of the postmaster idle loop. (The startup
process would eventually send a fresh request signal, but this change
may allow us to retry the fork sooner.)
Remove an obsolete comment and unnecessary test in
PostmasterStateMachine's handling of PM_SHUTDOWN_2 state. It's not
possible to have a live walreceiver in that state, and AFAICT has not
been possible since commit 5e85315ea. This isn't a live bug, but the
false comment is quite confusing to readers.
In passing, rearrange sigusr1_handler's CheckPromoteSignal tests so that
we don't uselessly perform stat() calls that we're going to ignore the
results of.
Add some comments clarifying the behavior of MaybeStartWalReceiver;
I very nearly rearranged it in a way that'd reintroduce the race
condition fixed in e5d494d78. Mea culpa for not commenting that
properly at the time.
Back-patch to all supported branches. The PMSIGNAL_ADVANCE_STATE_MACHINE
change is the only one of even minor significance, but we might as well
keep this code in sync across branches.
postgres_fdw: Fix incorrect handling of row movement for remote partitions.
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
Andres Freund [Wed, 24 Apr 2019 04:42:12 +0000 (21:42 -0700)]
Allow pg_class xid & multixid horizons to not be set.
This allows table AMs that don't need these horizons. This was already
documented in the tableam relation_set_new_filenode callback, but an
assert prevented if from actually working (the test AM code contained
the change itself). Defang the asserts in the general code, and move
the stronger ones into heap AM.
Relatedly, after CLUSTER/VACUUM, we'd always assign a relfrozenxid /
relminmxid. Change the table_relation_copy_for_cluster() interface to
allow the AM to overwrite the horizons that get set on the pg_class
entry. This'd also in the future allow AMs like heap to compute a
relfrozenxid during rewrite that's the table's actual minimum rather
than a pre-determined value. Arguably it'd have been better to move
the whole computation / setting of those values into the callback, but
it seems likely that for other reasons it'd be better to be able to
use one value to vacuum/cluster multiple tables (e.g. a toast's
horizon shouldn't be different than the table's).
Reported-By: Heikki Linnakangas
Author: Andres Freund
Discussion: https://postgr.es/m/9a7fb9cc-2419-5db7-8840-ddc10c93f122@iki.fi
Tom Lane [Tue, 23 Apr 2019 22:51:30 +0000 (18:51 -0400)]
Repair assorted issues in locale data extraction.
cache_locale_time (extraction of LC_TIME-related info) had never been
taught the lessons we previously learned about extraction of info related
to LC_MONETARY and LC_NUMERIC. Specifically, commit 95a777c61 taught
PGLC_localeconv() that data coming out of localeconv() was in an encoding
determined by the relevant locale, but we didn't realize that there's a
similar issue with strftime(). And commit a4930e7ca hardened
PGLC_localeconv() against errors occurring partway through, but failed
to do likewise for cache_locale_time(). So, rearrange the latter
function to perform encoding conversion and not risk failure while
it's got the locales set to temporary values.
This time around I also changed PGLC_localeconv() to treat it as FATAL
if it can't restore the previous settings of the locale values. There
is no reason (except possibly OOM) for that to fail, and proceeding with
the wrong locale values seems like a seriously bad idea --- especially
on Windows where we have to also temporarily change LC_CTYPE. Also,
protect against the possibility that we can't identify the codeset
reported for LC_MONETARY or LC_NUMERIC; rather than just failing,
try to validate the data without conversion.
The user-visible symptom this fixes is that if LC_TIME is set to a locale
name that implies an encoding different from the database encoding,
non-ASCII localized day and month names would be retrieved in the wrong
encoding, leading to either unexpected encoding-conversion error reports
or wrong output from to_char(). The other possible failure modes are
unlikely enough that we've not seen reports of them, AFAIK.
The encoding conversion problems do not manifest on Windows, since
we'd already created special-case code to handle that issue there.
Per report from Juan José Santamaría Flecha. Back-patch to all
supported versions.
Peter Geoghegan [Tue, 23 Apr 2019 17:33:57 +0000 (10:33 -0700)]
Prevent O(N^2) unique index insertion edge case.
Commit dd299df8 made nbtree treat heap TID as a tiebreaker column,
establishing the principle that there is only one correct location (page
and page offset number) for every index tuple, no matter what.
Insertions of tuples into non-unique indexes proceed as if heap TID
(scan key's scantid) is just another user-attribute value, but
insertions into unique indexes are more delicate. The TID value in
scantid must initially be omitted to ensure that the unique index
insertion visits every leaf page that duplicates could be on. The
scantid is set once again after unique checking finishes successfully,
which can force _bt_findinsertloc() to step right one or more times, to
locate the leaf page that the new tuple must be inserted on.
Stepping right within _bt_findinsertloc() was assumed to occur no more
frequently than stepping right within _bt_check_unique(), but there was
one important case where that assumption was incorrect: inserting a
"duplicate" with NULL values. Since _bt_check_unique() didn't do any
real work in this case, it wasn't appropriate for _bt_findinsertloc() to
behave as if it was finishing off a conventional unique insertion, where
any existing physical duplicate must be dead or recently dead.
_bt_findinsertloc() might have to grovel through a substantial portion
of all of the leaf pages in the index to insert a single tuple, even
when there were no dead tuples.
To fix, treat insertions of tuples with NULLs into a unique index as if
they were insertions into a non-unique index: never unset scantid before
calling _bt_search() to descend the tree, and bypass _bt_check_unique()
entirely. _bt_check_unique() is no longer responsible for incoming
tuples with NULL values.
Tom Lane [Tue, 23 Apr 2019 16:25:27 +0000 (12:25 -0400)]
Avoid order-of-execution problems with ALTER TABLE ADD PRIMARY KEY.
Up to now, DefineIndex() was responsible for adding attnotnull constraints
to the columns of a primary key, in any case where it hadn't been
convenient for transformIndexConstraint() to mark those columns as
is_not_null. It (or rather its minion index_check_primary_key) did this
by executing an ALTER TABLE SET NOT NULL command for the target table.
The trouble with this solution is that if we're creating the index due
to ALTER TABLE ADD PRIMARY KEY, and the outer ALTER TABLE has additional
sub-commands, the inner ALTER TABLE's operations executed at the wrong
time with respect to the outer ALTER TABLE's operations. In particular,
the inner ALTER would perform a validation scan at a point where the
table's storage might be inconsistent with its catalog entries. (This is
on the hairy edge of being a security problem, but AFAICS it isn't one
because the inner scan would only be interested in the tuples' null
bitmaps.) This can result in unexpected failures, such as the one seen
in bug #15580 from Allison Kaptur.
To fix, let's remove the attempt to do SET NOT NULL from DefineIndex(),
reducing index_check_primary_key's role to verifying that the columns are
already not null. (It shouldn't ever see such a case, but it seems wise
to keep the check for safety.) Instead, make transformIndexConstraint()
generate ALTER TABLE SET NOT NULL subcommands to be executed ahead of
the ADD PRIMARY KEY operation in every case where it can't force the
column to be created already-not-null. This requires only minor surgery
in parse_utilcmd.c, and it makes for a much more satisfying spec for
transformIndexConstraint(): it's no longer having to take it on faith
that someone else will handle addition of NOT NULL constraints.
To make that work, we have to move the execution of AT_SetNotNull into
an ALTER pass that executes ahead of AT_PASS_ADD_INDEX. I moved it to
AT_PASS_COL_ATTRS, and put that after AT_PASS_ADD_COL to avoid failure
when the column is being added in the same command. This incidentally
fixes a bug in the only previous usage of AT_PASS_COL_ATTRS, for
AT_SetIdentity: it didn't work either for a newly-added column.
Playing around with this exposed a separate bug in ALTER TABLE ONLY ...
ADD PRIMARY KEY for partitioned tables. The intent of the ONLY modifier
in that context is to prevent doing anything that would require holding
lock for a long time --- but the implied SET NOT NULL would recurse to
the child partitions, and do an expensive validation scan for any child
where the column(s) were not already NOT NULL. To fix that, invent a
new ALTER subcommand AT_CheckNotNull that just insists that a child
column be already NOT NULL, and apply that, not AT_SetNotNull, when
recursing to children in this scenario. This results in a slightly laxer
definition of ALTER TABLE ONLY ... SET NOT NULL for partitioned tables,
too: that command will now work as long as all children are already NOT
NULL, whereas before it just threw up its hands if there were any
partitions.
In passing, clean up the API of generateClonedIndexStmt(): remove a
useless argument, ensure that the output argument is not left undefined,
update the header comment.
A small side effect of this change is that no-such-column errors in ALTER
TABLE ADD PRIMARY KEY now produce a different message that includes the
table name, because they are now detected by the SET NOT NULL step which
has historically worded its error that way. That seems fine to me, so
I didn't make any effort to avoid the wording change.
The basic bug #15580 is of very long standing, and these other bugs
aren't new in v12 either. However, this is a pretty significant change
in the way ALTER TABLE ADD PRIMARY KEY works. On balance it seems best
not to back-patch, at least not till we get some more confidence that
this patch has no new bugs.
Patch by me, but thanks to Jie Zhang for a preliminary version.
Tom Lane [Tue, 23 Apr 2019 14:51:07 +0000 (10:51 -0400)]
Don't request pretty-printed output from xmlNodeDump().
xml.c passed format = 1 to xmlNodeDump(), resulting in sometimes getting
extra whitespace (newlines + spaces) in the output. We don't really want
that, first because whitespace might be semantically significant in some
XML uses, and second because it happens only very inconsistently. Only
one case in our regression tests is affected.
This potentially affects the results of xpath() and the XMLTABLE construct,
when emitting nodeset values.
Note that the older code in contrib/xml2 doesn't do this; it seems
to have been an aboriginal bad decision in commit ea3b212fe.
While this definitely seems like a bug to me, the small number of
complaints to date argues against back-patching a behavioral change.
Hence, fix in HEAD only, at least for now.
Michael Paquier [Tue, 23 Apr 2019 06:43:21 +0000 (15:43 +0900)]
Fix detection of passwords hashed with MD5 or SCRAM-SHA-256
This commit fixes a couple of issues related to the way password
verifiers hashed with MD5 or SCRAM-SHA-256 are detected, leading to
being able to store in catalogs passwords which do not follow the
supported hash formats:
- A MD5-hashed entry was checked based on if its header uses "md5" and
if the string length matches what is expected. Unfortunately the code
never checked if the hash only used hexadecimal characters, as reported
by Tom Lane.
- A SCRAM-hashed entry was checked based on only its header, which
should be "SCRAM-SHA-256$", but it never checked for any fields
afterwards, as reported by Jonathan Katz.
Backpatch down to v10, which is where SCRAM has been introduced, and
where password verifiers in plain format have been removed.
Author: Jonathan Katz Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/016deb6b-1f0a-8e9f-1833-a8675b170aa9@postgresql.org
Backpatch-through: 10
Andres Freund [Mon, 22 Apr 2019 21:28:30 +0000 (14:28 -0700)]
Convert gist to compute page level xid horizon on primary.
Due to parallel development, gist added the missing conflict
information in c952eae52a3, while 558a9165e08 moved that computation
to the primary for the index types that already had it. Thus adapt
gist to also compute on the primary, using
index_compute_xid_horizon_for_tuples() instead of its own copy of the
logic.
This also adds pg_waldump support for XLOG_GIST_DELETE records, which
previously was not properly present.
Bumps WAL version.
Author: Andres Freund
Discussion: https://postgr.es/m/20190406050243.bszosdg4buvabfrt@alap3.anarazel.de
Fix documentation of pg_start_backup and pg_stop_backup functions.
This commit adds the description that "non-exclusive" pg_start_backup
and pg_stop_backup can be executed even during recovery. Previously
it was wrongly documented that those functions are not allowed to be
executed during recovery.
Back-patch to 9.6 where non-exclusive backup API was added.
Tomas Vondra [Sun, 21 Apr 2019 17:54:15 +0000 (19:54 +0200)]
Fix mvdistinct and dependencies size calculations
The formulas used to calculate size while (de)serializing mvndistinct
and functional dependencies were based on offset() of the structs. But
that is incorrect, because the structures are not copied directly, we
we copy the individual fields directly.
At the moment this works fine, because there is no alignment padding
on any platform we support. But it might break if we ever added some
fields into any of the structs, for example. It's also confusing.
Fixed by reworking the macros to directly sum sizes of serialized
fields. The macros are now useful only for serialiation, so there is
no point in keeping them in the public header file. So make them
private by moving them to the .c files.
Also adds a couple more asserts to check the serialization, and fixes
an incorrect allocation of MVDependency instead of (MVDependency *).
Reported-By: Tom Lane
Discussion: https://postgr.es/m/29785.1555365602@sss.pgh.pa.us
Stephen Frost [Sat, 20 Apr 2019 01:22:22 +0000 (21:22 -0400)]
GSSAPI: Improve documentation and tests
The GSSAPI encryption patch neglected to update the protocol
documentation to describe how to set up a GSSAPI encrypted connection
from a client to the server, so fix that by adding the appropriate
documentation to protocol.sgml.
The tests added for encryption support were overly long and couldn't be
run in parallel due to race conditions; this was largely because each
test was setting up its own KDC to perform the tests. Instead, merge
the authentication tests and the encryption tests into the original
test, where we only create one KDC to run the tests with. Also, have
the tests check what the server's opinion is of the connection and if it
was GSS authenticated or encrypted using the pg_stat_gssapi view.
In passing, fix the libpq label for GSSENC-Mode to be consistent with
the "PGGSSENCMODE" environment variable.
Missing protocol documentation pointed out by Michael Paquier.
Issues with the tests pointed out by Tom Lane and Peter Eisentraut.
Refactored tests and added documentation by me.
Reviewed by Robbie Harwood (protocol documentation) and Michael Paquier
(rework of the tests).
Andres Freund [Fri, 19 Apr 2019 18:25:48 +0000 (11:25 -0700)]
Fix slot type issue for fuzzy distance index scan over out-of-core table AM.
For amcanreorderby scans the nodeIndexscan.c's reorder queue holds
heap tuples, but the underlying table likely does not. Before this fix
we'd return different types of slots, depending on whether the tuple
came from the reorder queue, or from the index + table.
While that could be fixed by signalling that the node doesn't return a
fixed type of slot, it seems better to instead remove the separate
slot for the reorder queue, and use ExecForceStoreHeapTuple() to store
tuples from the queue. It's not particularly common to need
reordering, after all.
This reverts most of the iss_ReorderQueueSlot related changes to
nodeIndexscan.c made in 1a0586de3657cd3, except that now
ExecForceStoreHeapTuple() is used instead of ExecStoreHeapTuple().
Noticed when testing zheap against the in-core version of tableam.
Andres Freund [Fri, 19 Apr 2019 18:33:37 +0000 (11:33 -0700)]
Fix two memory leaks around force-storing tuples in slots.
As reported by Tom, when ExecStoreMinimalTuple() had to perform a
conversion to store the minimal tuple in the slot, it forgot to
respect the shouldFree flag, and leaked the tuple into the current
memory context if true. Fix that by freeing the tuple in that case.
Looking at the relevant code made me (Andres) realize that not having
the shouldFree parameter to ExecForceStoreHeapTuple() was a bad
idea. Some callers had to locally implement the necessary logic, and
in one case it was missing, creating a potential per-group leak in
non-hashed aggregation.
The choice to not free the tuple in ExecComputeStoredGenerated() is
not pretty, but not introduced by this commit - I'll start a separate
discussion about it.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/366.1555382816@sss.pgh.pa.us
Tom Lane [Fri, 19 Apr 2019 15:20:37 +0000 (11:20 -0400)]
Fix problems with auto-held portals.
HoldPinnedPortals() did things in the wrong order: it must not mark
a portal autoHeld until it's been successfully held. Otherwise,
a failure while persisting the portal results in a server crash
because we think the portal is in a good state when it's not.
Also add a check that portal->status is READY before attempting to
hold a pinned portal. We have such a check before the only other
use of HoldPortal(), so it seems unwise not to check it here.
Lastly, rethink the responsibility for where to call HoldPinnedPortals.
The comment for it imagined that it was optional for any individual PL
to call it or not, but that cannot be the case: if some outer level of
procedure has a pinned portal, failing to persist it when an inner
procedure commits is going to be trouble. Let's have SPI do it instead
of the individual PLs. That's not a complete solution, since in theory
a PL might not be using SPI to perform commit/rollback, but such a PL
is going to have to be aware of lots of related requirements anyway.
(This change doesn't cause an API break for any external PLs that might
be calling HoldPinnedPortals per the old regime, because calling it
twice during a commit or rollback sequence won't hurt.)
Per bug #15703 from Julian Schauder. Back-patch to v11 where this code
came in.
Michael Paquier [Fri, 19 Apr 2019 06:51:23 +0000 (15:51 +0900)]
Remove dependency to pageinspect in recovery tests
If contrib/pageinspect is not installed, this causes the test checking
the minimum recovery point to fail. The point is that the dependency
with pageinspect is not really necessary as the test does also all
checks with an offline cluster by scanning directly the on-disk pages,
which is enough for the purpose of the test.
Per complaint from Tom Lane.
Author: Michael Paquier
Discussion: https://postgr.es/m/17806.1555566345@sss.pgh.pa.us
Andres Freund [Fri, 19 Apr 2019 00:53:54 +0000 (17:53 -0700)]
Fix potential use-after-free for BEFORE UPDATE row triggers on non-core AMs.
When such a trigger returns the old row version, it naturally get
stored in the slot for the trigger result. When a table AMs doesn't
store HeapTuples internally, ExecBRUpdateTriggers() frees the old row
version passed to triggers - but before this fix it might still be
referenced by the slot holding the new tuple.
Noticed when running the out-of-core zheap AM against the in-core
version of tableam.
Peter Eisentraut [Tue, 16 Apr 2019 08:37:44 +0000 (10:37 +0200)]
Fix handling of temp and unlogged tables in FOR ALL TABLES publications
If a FOR ALL TABLES publication exists, temporary and unlogged tables
are ignored for publishing changes. But CheckCmdReplicaIdentity()
would still check in that case that such a table has a replica
identity set before accepting updates. To fix, have
GetRelationPublicationActions() return that such a table publishes no
actions.
Andres Freund [Thu, 18 Apr 2019 00:31:54 +0000 (17:31 -0700)]
docs: correct typo-ed path to heapam_handler.c.
Reported-By: Michael Paquier, Michel Pelletier
Discussion:
https://postgr.es/m/20190410025531.GA2728@paquier.xyz
https://postgr.es/m/CACxu=v+u_QTeFqdajCHv3i4QmzV_63arVb57R19dSKtThdSLkQ@mail.gmail.com
Author: Justin Pryzby, editorialized a bit by Andres Freund Reviewed-By: Daniel Verite, Andres Freund
Discussion: https://postgr.es/m/20190408002847.GA904@telsasoft.com
Bruce Momjian [Wed, 17 Apr 2019 22:12:10 +0000 (18:12 -0400)]
postgresql.conf.sample: add proper defaults for include actions
Previously, include actions include_dir, include_if_exists, and include
listed commented-out values which were not the defaults, which is
inconsistent with other entries. Instead, replace them with '', which
is the default value.
Bruce Momjian [Wed, 17 Apr 2019 22:01:02 +0000 (18:01 -0400)]
docs: clarify pg_upgrade's recovery behavior
The previous paragraph trying to explain --check, --link, and no --link
modes and the various points of failure was too complex. Instead, use
bullet lists and sublists.
Reported-by: Daniel Gustafsson
Discussion: https://postgr.es/m/qtqiv7hI87s_Xvz5ZXHCaH-1-_AZGpIDJowzlRjF3-AbCr3RhSNydM_JCuJ8DE4WZozrtxhIWmyYTbv0syKyfGB6cYMQitp9yN-NZMm-oAo=@yesql.se
Tom Lane [Wed, 17 Apr 2019 21:30:29 +0000 (17:30 -0400)]
Fix unportable code in pgbench.
The buildfarm points out that UINT64_FORMAT might not work with sscanf;
it's calibrated for our printf implementation, which might not agree
with the platform-supplied sscanf. Fall back to just accepting an
unsigned long, which is already more than the documentation promises.
Oversight in e6c3ba7fb; back-patch to v11, as that was.
Tom Lane [Wed, 17 Apr 2019 21:06:50 +0000 (17:06 -0400)]
Fix assorted minor bogosity in GSSAPI transport error messages.
I noted that some buildfarm members were complaining about %ld being
used to format values that are (probably) declared size_t. Use %zu
instead, and insert a cast just in case some versions of the GSSAPI
API declare the length field differently. While at it, clean up
gratuitous differences in wording of equivalent messages, show
the complained-of length in all relevant messages not just some,
include trailing newline where needed, adjust random deviations
from project-standard code layout and message style, etc.
When saving a replication slot, failing to close the temporary path used
to save the slot information is considered as a failure and reported as
such. However the code forgot to leave immediately as other failure
paths do.
Noticed while looking up at this area of the code for another patch.
Michael Paquier [Wed, 17 Apr 2019 00:51:45 +0000 (09:51 +0900)]
Simplify some ERROR paths clearing wait events and transient files
Transient files and wait events get normally cleaned up when seeing an
exception (be it in the context of a transaction for a backend or
another process like the checkpointer), hence there is little point in
complicating error code paths to do this work. This shaves a bit of
code, and removes some extra handling with errno which needed to be
preserved during the cleanup steps done.
Reported-by: Masahiko Sawada
Author: Michael Paquier Reviewed-by: Tom Lane, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoDhHYVq5KkXfkaHhmjA-zJYj-e4teiRAJefvXuKJz1tKQ@mail.gmail.com
Michael Paquier [Wed, 17 Apr 2019 00:33:51 +0000 (09:33 +0900)]
Rework handling of invalid indexes with REINDEX CONCURRENTLY
Per discussion with others, allowing REINDEX INDEX CONCURRENTLY to work
for invalid indexes when working directly on them can have a lot of
value to unlock situations with invalid indexes without having to use a
dance involving DROP INDEX followed by an extra CREATE INDEX
CONCURRENTLY (which would not work for indexes with constraint
dependency anyway). This also does not create extra bloat on the
relation involved as this works on individual indexes, so let's enable
it.
Note that REINDEX TABLE CONCURRENTLY still bypasses invalid indexes as
we don't want to bloat the number of indexes defined on a relation in
the event of multiple and successive failures of REINDEX CONCURRENTLY.
More regression tests are added to cover those behaviors, using an
invalid index created with CREATE INDEX CONCURRENTLY.
Reported-by: Dagfinn Ilmari Mannsåker, Álvaro Herrera
Author: Michael Paquier Reviewed-by: Peter Eisentraut, Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/20190411134947.GA22043@alvherre.pgsql
Peter Eisentraut [Tue, 16 Apr 2019 12:27:56 +0000 (14:27 +0200)]
Better scaling of images in HTML output
Turn on the previously disabled automatic scaling of images in HTML
output. To avoid images looking too large on nowadays-normal screens,
restrict the width to 75% on such screens.
Some work is still necessary because SVG images without a viewBox
still won't scale, but that will a separate patch.
Tomas Vondra [Mon, 15 Apr 2019 22:02:22 +0000 (00:02 +0200)]
Convert pre-existing stats_ext tests to new style
The regression tests added in commit 7300a69950 test cardinality
estimates using a function that extracts the interesting pieces
from the EXPLAIN output, instead of testing the whole plan. That
seems both easier to understand and less fragile, so this applies
the same approach to pre-existing tests of ndistinct coefficients
and functional dependencies.
Tomas Vondra [Mon, 15 Apr 2019 22:01:39 +0000 (00:01 +0200)]
Fix pg_mcv_list deserialization
The memcpy() was copying type OIDs in the wrong direction, so the
deserialized MCV list always had them as 0. This is mostly harmless
except when printing the data in pg_mcv_list_items(), in which case
it reported
ERROR: cache lookup failed for type 0
Also added a simple regression test for pg_mcv_list_items() function,
printing a single-item MCV list.
Reported-By: Dean Rasheed
Discussion: https://postgr.es/m/CAEZATCX6T0iDTTZrqyec4Cd6b4yuL7euu4=rQRXaVBAVrUi1Cg@mail.gmail.com
Tom Lane [Mon, 15 Apr 2019 20:19:51 +0000 (16:19 -0400)]
Avoid possible regression test instability in timestamp.sql.
Concurrent autovacuum could result in a change in the order of the
live rows in timestamp_tbl. While this would not happen with the
default autovacuum parameters, it's fairly easy to hit if
autovacuum_vacuum_threshold is made small enough to allow autovac
to decide to process this table. That's a stumbling block for trying
to exercise autovacuum aggressively using the core regression tests.
To fix, replace an unqualified DELETE with a TRUNCATE. There's a
similar DELETE just above (and no order-sensitive queries between),
so this doesn't lose any test coverage and might indeed be argued
to improve it.
Fix division by zero in _bt_vacuum_needs_cleanup()
Checks inside _bt_vacuum_needs_cleanup() allow division by zero to happen when
metad->btm_last_cleanup_num_heap_tuples == 0. This commit adjusts the
expression so that no division by zero might happen.
Reported-by: Piotr Stefaniak
Discussion: https://postgr.es/m/DB8PR03MB5931C41F7787A95313F08322F22A0%40DB8PR03MB5931.eurprd03.prod.outlook.com Reviewed-by: Masahiko Sawada
Backpatch-through: 11
projects / postgresql / log