Alvaro Herrera [Wed, 25 Mar 2015 17:28:34 +0000 (14:28 -0300)]
Fix bug for array-formatted identities of user mappings
I failed to realize that server names reported in the object args array
would get quoted, which is wrong; remove that, making sure that it's
only quoted in the string-formatted identity.
This bug was introduced by my commit cf34e373, which was backpatched,
but since object name/args arrays are new in commit a676201490c8, there
is no need to backpatch this any further.
Tom Lane [Tue, 24 Mar 2015 19:53:06 +0000 (15:53 -0400)]
Fix ExecOpenScanRelation to take a lock on a ROW_MARK_COPY relation.
ExecOpenScanRelation assumed that any relation listed in the ExecRowMark
list has been locked by InitPlan; but this is not true if the rel's
markType is ROW_MARK_COPY, which is possible if it's a foreign table.
In most (possibly all) cases, failure to acquire a lock here isn't really
problematic because the parser, planner, or plancache would have taken the
appropriate lock already. In principle though it might leave us vulnerable
to working with a relation that we hold no lock on, and in any case if the
executor isn't depending on previously-taken locks otherwise then it should
not do so for ROW_MARK_COPY relations.
Noted by Etsuro Fujita. Back-patch to all active versions, since the
inconsistency has been there a long time. (It's almost certainly
irrelevant in 9.0, since that predates foreign tables, but the code's
still wrong on its own terms.)
Tom Lane [Mon, 23 Mar 2015 20:59:29 +0000 (16:59 -0400)]
Apply table and domain CHECK constraints in name order.
Previously, CHECK constraints of the same scope were checked in whatever
order they happened to be read from pg_constraint. (Usually, but not
reliably, this would be creation order for domain constraints and reverse
creation order for table constraints, because of differing implementation
details.) Nondeterministic results of this sort are problematic at least
for testing purposes, and in discussion it was agreed to be a violation of
the principle of least astonishment. Therefore, borrow the principle
already established for triggers, and apply such checks in name order
(using strcmp() sort rules). This lets users control the check order
if they have a mind to.
Domain CHECK constraints still follow the rule of checking lower nested
domains' constraints first; the name sort only applies to multiple
constraints attached to the same domain.
In passing, I failed to resist the temptation to wordsmith a bit in
create_domain.sgml.
Apply to HEAD only, since this could result in a behavioral change in
existing applications, and the potential regression test failures have
not actually been observed in our buildfarm.
It worked in my Windows VM with VS2013, but buildfarm animal mastodon,
running MSVC 2005, was not happy. Amit Kapila also reported a similar error
earlier in his environment. Let's see if this helps.
Andres Freund [Mon, 23 Mar 2015 15:40:10 +0000 (16:40 +0100)]
Don't delay replication for less than recovery_min_apply_delay's resolution.
Recovery delays are implemented by waiting on a latch, and latches take
milliseconds as a parameter. The required amount of waiting was computed
using microsecond resolution though and the wait loop's abort condition
was checking the delay in microseconds as well. This could lead to
short spurts of busy looping when the overall wait time was below a
millisecond, but above 0 microseconds.
Instead just formulate the wait loop's abort condition in millisecond
granularity as well. Given that that's recovery_min_apply_delay
resolution, it seems harmless to not wait for less than a millisecond.
Backpatch to 9.4 where recovery_min_apply_delay was introduced.
Robert Haas [Mon, 23 Mar 2015 13:58:56 +0000 (09:58 -0400)]
Remove ill-advised pre-check for DSM segment exhaustion.
dsm_control->nitems never decreases, so this is testing whether the
server has *ever* run out of DSM segments, not whether it is
*currently* out of DSM segments.
Revert "to_char(float4/8): zero pad to specified length". There are
too many platform-specific problems, and the proper rounding is missing.
Also revert companion patch 9d61b9953c1489cbb458ca70013cf5fca1bb7710.
Tom Lane [Sun, 22 Mar 2015 17:53:11 +0000 (13:53 -0400)]
Allow foreign tables to participate in inheritance.
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
Bruce Momjian [Sun, 22 Mar 2015 01:43:15 +0000 (21:43 -0400)]
to_char(float4/8): zero pad to specified length
Previously, zero padding was limited to the internal length, rather than
the specified length. This allows it to match to_char(int/numeric), which
always padded to the specified length.
Make pg_xlogdump MSVC build work more like others.
Instead of copying xlogreader.c and *desc.c files into the source directory,
build them where they are. That's what we do for other binaries that need to
compile and link in files from elsewhere in the source tree.
The commit history suggests that it was done this way because of issues with
older versions of MSVC. I think this should work, but we'll see if the
buildfarm complains.
Andres Freund [Fri, 20 Mar 2015 09:26:17 +0000 (10:26 +0100)]
Use 128-bit math to accelerate some aggregation functions.
On platforms where we support 128bit integers, use them to implement
faster transition functions for sum(int8), avg(int8),
var_*(int2/int4),stdev_*(int2/int4). Where not supported continue to use
numeric as a transition type.
In some synthetic benchmarks this has been shown to provide significant
speedups.
Bumps catversion.
Discussion: 544BB5F1.50709@proxel.se
Author: Andreas Karlsson Reviewed-By: Peter Geoghegan, Petr Jelinek, Andres Freund,
Oskari Saarenmaa, David Rowley
Andres Freund [Fri, 20 Mar 2015 09:26:17 +0000 (10:26 +0100)]
Add, optional, support for 128bit integers.
We will, for the foreseeable future, not expose 128 bit datatypes to
SQL. But being able to use 128bit math will allow us, in a later patch,
to use 128bit accumulators for some aggregates; leading to noticeable
speedups over using numeric.
So far we only detect a gcc/clang extension that supports 128bit math,
but no 128bit literals, and no *printf support. We might want to expand
this in the future to further compilers; if there are any that that
provide similar support.
Discussion: 544BB5F1.50709@proxel.se
Author: Andreas Karlsson, with significant editorializing by me Reviewed-By: Peter Geoghegan, Oskari Saarenmaa
Stephen Frost [Thu, 19 Mar 2015 19:02:33 +0000 (15:02 -0400)]
GetUserId() changes to has_privs_of_role()
The pg_stat and pg_signal-related functions have been using GetUserId()
instead of has_privs_of_role() for checking if the current user should
be able to see details in pg_stat_activity or signal other processes,
requiring a user to do 'SET ROLE' for inheirited roles for a permissions
check, unlike other permissions checks.
This patch changes that behavior to, instead, act like most other
permission checks and use has_privs_of_role(), removing the 'SET ROLE'
need. Documentation and error messages updated accordingly.
Per discussion with Alvaro, Peter, Adam (though not using Adam's patch),
and Robert.
Robert Haas [Thu, 19 Mar 2015 17:02:16 +0000 (13:02 -0400)]
Add flags argument to dsm_create.
Right now, there's only one flag, DSM_CREATE_NULL_IF_MAXSEGMENTS,
which suppresses the error that would normally be thrown when the
maximum number of segments already exists, instead returning NULL.
It might be useful to add more flags in the future, such as one to
ignore allocation errors, but I haven't done that here.
Robert Haas [Thu, 19 Mar 2015 14:56:34 +0000 (10:56 -0400)]
Fix status reporting for terminated bgworkers that were never started.
Previously, GetBackgroundWorkerPid() would return BGWH_NOT_YET_STARTED
if the slot used for the worker registration had not been reused by
unrelated activity, and BGWH_STOPPED if it had. Either way, a process
that had requested notification when the state of one of its
background workers changed did not receive such notifications. Fix
things so that GetBackgroundWorkerPid() always returns BGWH_STOPPED in
this situation, so that we do not erroneously give waiters the
impression that the worker will eventually be started; and send
notifications just as we would if the process terminated after having
been started, so that it's possible to wait for the postmaster to
process a worker termination request without polling.
Discovered by Amit Kapila during testing of parallel sequential scan.
Analysis and fix by me. Back-patch to 9.4; there may not be anyone
relying on this interface yet, but if anyone is, the new behavior is a
clear improvement.
Alvaro Herrera [Wed, 18 Mar 2015 18:16:29 +0000 (15:16 -0300)]
Install shared libraries to bin/ in Windows under MSVC
Since commit cb4a3b04 we were already doing this for the Cygwin/mingw
toolchains, but MSVC had not been updated to do it. At Install.pm time,
the Makefile (or GNUmakefile) is inspected, and if a line matching
SO_MAJOR_VERSION is found (indicating a shared library is being built),
then files with the .dll extension are set to be installed in bin/
rather than lib/, while files with .lib extension are installed in lib/.
This makes the MSVC toolchain up to date with cygwin/mingw.
This removes ad-hoc hacks that were copying files into bin/ or lib/
manually (libpq.dll in particular was already being copied into bin).
So while this is a rather ugly kludge, it's still cleaner than what was
there before.
Alvaro Herrera [Wed, 18 Mar 2015 14:52:33 +0000 (11:52 -0300)]
Rationalize vacuuming options and parameters
We were involving the parser too much in setting up initial vacuuming
parameters. This patch moves that responsibility elsewhere to simplify
code, and also to make future additions easier. To do this, create a
new struct VacuumParams which is filled just prior to vacuum execution,
instead of at parse time; for user-invoked vacuuming this is set up in a
new function ExecVacuum, while autovacuum sets it up by itself.
While at it, add a new member VACOPT_SKIPTOAST to enum VacuumOption,
only set by autovacuum, which is used to disable vacuuming of the toast
table instead of the old do_toast parameter; this relieves the argument
list of vacuum() and some callees a bit. This partially makes up for
having added more arguments in an effort to avoid having autovacuum from
constructing a VacuumStmt parse node.
Author: Michael Paquier. Some tweaks by Álvaro
Reviewed by: Robert Haas, Stephen Frost, Álvaro Herrera
Alvaro Herrera [Tue, 17 Mar 2015 01:35:45 +0000 (22:35 -0300)]
Fix out-of-array-bounds compiler warning
Since the array length check is using a post-increment operator, the
compiler complains that there's a potential write to one element beyond
the end of the array. This is not possible currently: the only path to
this function is through pg_get_object_address(), which already verifies
that the input array is no more than two elements in length. Still, a
bug is a bug.
No idea why my compiler doesn't complain about this ...
Alvaro Herrera [Mon, 16 Mar 2015 15:06:34 +0000 (12:06 -0300)]
Support opfamily members in get_object_address
In the spirit of 890192e99af and 4464303405f: have get_object_address
understand individual pg_amop and pg_amproc objects. There is no way to
refer to such objects directly in the grammar -- rather, they are almost
always considered an integral part of the opfamily that contains them.
(The only case that deals with them individually is ALTER OPERATOR
FAMILY ADD/DROP, which carries the opfamily address separately and thus
does not need it to be part of each added/dropped element's address.)
In event triggers it becomes possible to become involved with individual
amop/amproc elements, and this commit enables pg_get_object_address to
do so as well.
To make the overall coding simpler, this commit also slightly changes
the get_object_address representation for opclasses and opfamilies:
instead of having the AM name in the objargs array, I moved it as the
first element of the objnames array. This enables the new code to use
objargs for the type names used by pg_amop and pg_amproc.
Tom Lane [Mon, 16 Mar 2015 03:22:03 +0000 (23:22 -0400)]
Replace insertion sort in contrib/intarray with qsort().
It's all very well to claim that a simplistic sort is fast in easy
cases, but O(N^2) in the worst case is not good ... especially if the
worst case is as easy to hit as "descending order input". Replace that
bit with our standard qsort.
Per bug #12866 from Maksym Boguk. Back-patch to all active branches.
Tom Lane [Sun, 15 Mar 2015 22:41:47 +0000 (18:41 -0400)]
Improve representation of PlanRowMark.
This patch fixes two inadequacies of the PlanRowMark representation.
First, that the original LockingClauseStrength isn't stored (and cannot be
inferred for foreign tables, which always get ROW_MARK_COPY). Since some
PlanRowMarks are created out of whole cloth and don't actually have an
ancestral RowMarkClause, this requires adding a dummy LCS_NONE value to
enum LockingClauseStrength, which is fairly annoying but the alternatives
seem worse. This fix allows getting rid of the use of get_parse_rowmark()
in FDWs (as per the discussion around commits 462bd95705a0c23b and 8ec8760fc87ecde0), and it simplifies some things elsewhere.
Second, that the representation assumed that all child tables in an
inheritance hierarchy would use the same RowMarkType. That's true today
but will soon not be true. We add an "allMarkTypes" field that identifies
the union of mark types used in all a parent table's children, and use
that where appropriate (currently, only in preprocess_targetlist()).
In passing fix a couple of minor infelicities left over from the SKIP
LOCKED patch, notably that _outPlanRowMark still thought waitPolicy
is a bool.
Catversion bump is required because the numeric values of enum
LockingClauseStrength can appear in on-disk rules.
Extracted from a much larger patch to support foreign table inheritance;
it seemed worth breaking this out, since it's a separable concern.
Shigeru Hanada and Etsuro Fujita, somewhat modified by me
Tom Lane [Sun, 15 Mar 2015 19:19:04 +0000 (15:19 -0400)]
Move LockClauseStrength, LockWaitPolicy into new file nodes/lockoptions.h.
Commit df630b0dd5ea2de52972d456f5978a012436115e moved enum LockWaitPolicy
into its very own header file utils/lockwaitpolicy.h, which does not seem
like a great idea from here. First, it's still a node-related declaration,
and second, a file named like that can never sensibly be used for anything
else. I do not think we want to encourage a one-typedef-per-header-file
approach. The upcoming foreign table inheritance patch was doubling down
on this bad idea by moving enum LockClauseStrength into its *own*
can-never-be-used-for-anything-else file. Instead, let's put them both in
a file named nodes/lockoptions.h. (They do seem to need a separate header
file because we need them in both parsenodes.h and plannodes.h, and we
don't want either of those including the other. Past practice might
suggest adding them to nodes/nodes.h, but they don't seem sufficiently
globally useful to justify that.)
Committed separately since there's no functional change here, just some
header-file refactoring.
Tom Lane [Sun, 15 Mar 2015 16:45:35 +0000 (12:45 -0400)]
Add missing documentation for PGC_SU_BACKEND in description of pg_settings.
Commit fe550b2ac249af5fbd8e9e19290a4ba43c882f2d missed updating this list
of the PGC_XXX values, which in hindsight is not so surprising because
catalogs.sgml is not a place you'd think to look for them. In addition to
adding the missing doco, insert the PGC_XXX C enum names in SGML comments,
so that grepping for the enum names will find this file. That might spare
the next person similar embarrassment.
Andres Freund [Sun, 15 Mar 2015 16:37:07 +0000 (17:37 +0100)]
Merge the various forms of transaction commit & abort records.
Since 465883b0a two versions of commit records have existed. A compact
version that was used when no cache invalidations, smgr unlinks and
similar were needed, and a full version that could deal with all
that. Additionally the full version was embedded into twophase commit
records.
That resulted in a measurable reduction in the size of the logged WAL in
some workloads. But more recently additions like logical decoding, which
e.g. needs information about the database something was executed on,
made it applicable in fewer situations. The static split generally made
it hard to expand the commit record, because concerns over the size made
it hard to add anything to the compact version.
Additionally it's not particularly pretty to have twophase.c insert
RM_XACT records.
Rejigger things so that the commit and abort records only have one form
each, including the twophase equivalents. The presence of the various
optional (in the sense of not being in every record) pieces is indicated
by a bits in the 'xinfo' flag. That flag previously was not included in
compact commit records. To prevent an increase in size due to its
presence, it's only included if necessary; signalled by a bit in the
xl_info bits available for xact.c, similar to heapam.c's
XLOG_HEAP_OPMASK/XLOG_HEAP_INIT_PAGE.
Twophase commit/aborts are now the same as their normal
counterparts. The original transaction's xid is included in an optional
data field.
This means that commit records generally are smaller, except in the case
of a transaction with subtransactions, but no other special cases; the
increase there is four bytes, which seems acceptable given that the more
common case of not having subtransactions shrank. The savings are
especially measurable for twophase commits, which previously always used
the full version; but will in practice only infrequently have required
that.
The motivation for this work are not the space savings and and
deduplication though; it's that it makes it easier to extend commit
records with additional information. That's just a few lines of code
now; without impacting the common case where that information is not
needed.
Andres Freund [Sun, 15 Mar 2015 16:37:07 +0000 (17:37 +0100)]
Increase max_wal_size's default from 128MB to 1GB.
The introduction of min_wal_size & max_wal_size in 88e982302684 makes it
feasible to increase the default upper bound in checkpoint
size. Previously raising the default would lead to a increased disk
footprint, even if more segments weren't beneficial. The low default of
checkpoint size is one of common performance problem users have thus
increasing the default makes sense. Setups where the increase in
maximum disk usage is a problem will very likely have to run with a
modified configuration anyway.
The new recovery_target_action (introduced in aedccb1f6/b8e33a85d4)
replaces it's functionality. Having both seems likely to cause more
confusion than it saves worry due to the incompatibility.
Discussion: 5484FC53.2060903@2ndquadrant.com
Author: Petr Jelinek
Tom Lane [Sat, 14 Mar 2015 18:08:45 +0000 (14:08 -0400)]
Build src/port/dirmod.c only on Windows.
Since commit ba7c5975adea74c6f17bdb0e0427ad85962092a2, port/dirmod.c
has contained only Windows-specific functions. Most platforms don't
seem to mind uselessly building an empty file, but OS X for one issues
warnings. Hence, treat dirmod.c as a Windows-specific file selected
by configure rather than one that's always built. We can revert this
change if dirmod.c ever gains any non-Windows functionality again.
Back-patch to 9.4 where the mentioned commit appeared.
Tom Lane [Sat, 14 Mar 2015 17:43:00 +0000 (13:43 -0400)]
Remove workaround for ancient incompatibility between readline and libedit.
GNU readline defines the return value of write_history() as "zero if OK,
else an errno code". libedit's version of that function used to have a
different definition (to wit, "-1 if error, else the number of lines
written to the file"). We tried to work around that by checking whether
errno had become nonzero, but this method has never been kosher according
to the published API of either library. It's reportedly completely broken
in recent Ubuntu releases: psql bleats about "No such file or directory"
when saving ~/.psql_history, even though the write worked fine.
However, libedit has been following the readline definition since somewhere
around 2006, so it seems all right to finally break compatibility with
ancient libedit releases and trust that the return value is what readline
specifies. (I'm not sure when the various Linux distributions incorporated
this fix, but I did find that OS X has been shipping fixed versions since
10.5/Leopard.)
If anyone is still using such an ancient libedit, they will find that psql
complains it can't write ~/.psql_history at exit, even when the file was
written correctly. This is no worse than the behavior we're fixing for
current releases.
Tatsuo Ishii [Fri, 13 Mar 2015 23:16:50 +0000 (08:16 +0900)]
Fix integer overflow in debug message of walreceiver
The message tries to tell the replication apply delay which fails if
the first WAL record is not applied yet. Fix is, instead of telling
overflowed minus numeric, showing "N/A" which indicates that the delay
data is not yet available. Problem reported by me and patch by
Fabrízio de Royes Mello.
Back patched to 9.4, 9.3 and 9.2 stable branches (9.1 and 9.0 do not
have the debug message).
Tom Lane [Thu, 12 Mar 2015 17:38:49 +0000 (13:38 -0400)]
Ensure tableoid reads correctly in EvalPlanQual-manufactured tuples.
The ROW_MARK_COPY path in EvalPlanQualFetchRowMarks() was just setting
tableoid to InvalidOid, I think on the assumption that the referenced
RTE must be a subquery or other case without a meaningful OID. However,
foreign tables also use this code path, and they do have meaningful
table OIDs; so failure to set the tuple field can lead to user-visible
misbehavior. Fix that by fetching the appropriate OID from the range
table.
There's still an issue about whether CTID can ever have a meaningful
value in this case; at least with postgres_fdw foreign tables, it does.
But that is a different problem that seems to require a significantly
different patch --- it's debatable whether postgres_fdw really wants to
use this code path at all.
Simplified version of a patch by Etsuro Fujita, who also noted the
problem to begin with. The issue can be demonstrated in all versions
having FDWs, so back-patch to 9.1.
Tom Lane [Thu, 12 Mar 2015 03:18:03 +0000 (23:18 -0400)]
Support flattening of empty-FROM subqueries and one-row VALUES tables.
We can't handle this in the general case due to limitations of the
planner's data representations; but we can allow it in many useful cases,
by being careful to flatten only when we are pulling a single-row subquery
up into a FROM (or, equivalently, inner JOIN) node that will still have at
least one remaining relation child. Per discussion of an example from
Kyotaro Horiguchi.
Tom Lane [Thu, 12 Mar 2015 02:53:32 +0000 (22:53 -0400)]
Fix old bug in get_loop_count().
While poking at David Kubečka's issue I noticed an ancient logic error
in get_loop_count(): it used 1.0 as a "no data yet" indicator, but since
that is actually a valid rowcount estimate, this doesn't work. If we
have one input relation with 1.0 as rowcount and then another one with
a larger rowcount, we should use 1.0 as the result, but we picked the
larger rowcount instead. (I think when I coded this, I recognized the
conflict, but mistakenly thought that the logic would pick the desired
count anyway.)
Fixing this changed the plan for one existing regression test case.
Since the point of that test is to exercise creation of a particular
shape of nestloop plan, I tweaked the query a little bit so it still
results in the same plan choice.
This is definitely a bug, but I'm hesitant to back-patch since it might
change plan choices unexpectedly, and anyway failure to implement a
heuristic precisely as intended is a pretty low-grade bug.
Tom Lane [Thu, 12 Mar 2015 01:21:00 +0000 (21:21 -0400)]
Improve planner's cost estimation in the presence of semijoins.
If we have a semijoin, say
SELECT * FROM x WHERE x1 IN (SELECT y1 FROM y)
and we're estimating the cost of a parameterized indexscan on x, the number
of repetitions of the indexscan should not be taken as the size of y; it'll
really only be the number of distinct values of y1, because the only valid
plan with y on the outside of a nestloop would require y to be unique-ified
before joining it to x. Most of the time this doesn't make that much
difference, but sometimes it can lead to drastically underestimating the
cost of the indexscan and hence choosing a bad plan, as pointed out by
David Kubečka.
Fixing this is a bit difficult because parameterized indexscans are costed
out quite early in the planning process, before we have the information
that would be needed to call estimate_num_groups() and thereby estimate the
number of distinct values of the join column(s). However we can move the
code that extracts a semijoin RHS's unique-ification columns, so that it's
done in initsplan.c rather than on-the-fly in create_unique_path(). That
shouldn't make any difference speed-wise and it's really a bit cleaner too.
The other bit of information we need is the size of the semijoin RHS,
which is easy if it's a single relation (we make those estimates before
considering indexscan costs) but problematic if it's a join relation.
The solution adopted here is just to use the product of the sizes of the
join component rels. That will generally be an overestimate, but since
estimate_num_groups() only uses this input as a clamp, an overestimate
shouldn't hurt us too badly. In any case we don't allow this new logic
to produce a value larger than we would have chosen before, so that at
worst an overestimate leaves us no wiser than we were before.
Alvaro Herrera [Wed, 11 Mar 2015 22:23:47 +0000 (19:23 -0300)]
Support default ACLs in get_object_address
In the spirit of 890192e99af, this time add support for the things
living in the pg_default_acl catalog. These are not really "objects",
but they show up as such in event triggers.
There is no "DROP DEFAULT PRIVILEGES" or similar command, so it doesn't
look like the new representation given would be useful anywhere else, so
I didn't try to use it outside objectaddress.c. (That might be a bug in
itself, but that would be material for another commit.)
Alvaro Herrera [Wed, 11 Mar 2015 20:01:13 +0000 (17:01 -0300)]
Support user mappings in get_object_address
Since commit 72dd233d3ef we were trying to obtain object addressing
information in sql_drop event triggers, but that caused failures when
the drops involved user mappings. This addition enables that to work
again. Naturally, pg_get_object_address can work with these objects
now, too.
I toyed with the idea of removing DropUserMappingStmt as a node and
using DropStmt instead in the DropUserMappingStmt grammar production,
but that didn't go very well: for one thing the messages thrown by the
specific code are specialized (you get "server not found" if you specify
the wrong server, instead of a generic "user mapping for ... not found"
which you'd get it we were to merge this with RemoveObjects --- unless
we added even more special cases). For another thing, it would require
to pass RoleSpec nodes through the objname/objargs representation used
by RemoveObjects, which works in isolation, but gets messy when
pg_get_object_address is involved. So I dropped this part for now.
Tom Lane [Wed, 11 Mar 2015 17:22:52 +0000 (13:22 -0400)]
Make operator precedence follow the SQL standard more closely.
While the SQL standard is pretty vague on the overall topic of operator
precedence (because it never presents a unified BNF for all expressions),
it does seem reasonable to conclude from the spec for <boolean value
expression> that OR has the lowest precedence, then AND, then NOT, then IS
tests, then the six standard comparison operators, then everything else
(since any non-boolean operator in a WHERE clause would need to be an
argument of one of these).
We were only sort of on board with that: most notably, while "<" ">" and
"=" had properly low precedence, "<=" ">=" and "<>" were treated as generic
operators and so had significantly higher precedence. And "IS" tests were
even higher precedence than those, which is very clearly wrong per spec.
Another problem was that "foo NOT SOMETHING bar" constructs, such as
"x NOT LIKE y", were treated inconsistently because of a bison
implementation artifact: they had the documented precedence with respect
to operators to their right, but behaved like NOT (i.e., very low priority)
with respect to operators to their left.
Fixing the precedence issues is just a small matter of rearranging the
precedence declarations in gram.y, except for the NOT problem, which
requires adding an additional lookahead case in base_yylex() so that we
can attach a different token precedence to NOT LIKE and allied two-word
operators.
The bulk of this patch is not the bug fix per se, but adding logic to
parse_expr.c to allow giving warnings if an expression has changed meaning
because of these precedence changes. These warnings are off by default
and are enabled by the new GUC operator_precedence_warning. It's believed
that very few applications will be affected by these changes, but it was
agreed that a warning mechanism is essential to help debug any that are.
Tom Lane [Wed, 11 Mar 2015 16:40:43 +0000 (12:40 -0400)]
Allocate ParamListInfo once per plpgsql function, not once per expression.
setup_param_list() was allocating a fresh ParamListInfo for each query or
expression evaluation requested by a plpgsql function. There was probably
once good reason to do it like that, but for a long time we've had a
convention that there's a one-to-one mapping between the function's
PLpgSQL_datum array and the ParamListInfo slots, which means that a single
ParamListInfo can serve all the function's evaluation requests: the data
that would need to be passed is the same anyway.
In this patch, we retain the pattern of zeroing out the ParamListInfo
contents during each setup_param_list() call, because some of the slots may
be stale and we don't know exactly which ones. So this patch only saves a
palloc/pfree per evaluation cycle and nothing more; still, that seems to be
good for a couple percent overall speedup on simple-arithmetic type
statements. In future, though, we might be able to improve matters still
more by managing the param array contents more carefully.
Also, unify the former use of estate->cur_expr with that of
paramLI->parserSetupArg; they both were used to point to the active
expression, so we can combine the variables into just one.
Robert Haas [Wed, 11 Mar 2015 14:44:04 +0000 (10:44 -0400)]
Suggest to the user the column they may have meant to reference.
Error messages informing the user that no such column exists can
sometimes provoke a perplexed response. This often happens due to
a subtle typo in the column name or, perhaps less likely, in the
alias name. To speed discovery of what the real issue is in such
cases, we'll now search the range table for approximate matches.
If there are one or two such matches that are good enough to think
that they might be what the user intended to type, and better than
all other approximate matches, we'll issue a hint suggesting that
the user might have intended to reference those columns.
Andres Freund [Wed, 11 Mar 2015 13:19:54 +0000 (14:19 +0100)]
Add macros wrapping all usage of gcc's __attribute__.
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
Fujii Masao [Wed, 11 Mar 2015 06:52:24 +0000 (15:52 +0900)]
Add GUC to enable compression of full page images stored in WAL.
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
Tom Lane [Tue, 10 Mar 2015 15:48:34 +0000 (11:48 -0400)]
Clean up the mess from => patch.
Commit 865f14a2d31af23a05bbf2df04c274629c5d5c4d was quite a few bricks
shy of a load: psql, ecpg, and plpgsql were all left out-of-step with
the core lexer. Of these only the last was likely to be a fatal
problem; but still, a minimal amount of grepping, or even just reading
the comments adjacent to the places that were changed, would have found
the other places that needed to be changed.
Alvaro Herrera [Tue, 10 Mar 2015 15:36:17 +0000 (12:36 -0300)]
Fix stray sentence fragment in shared_preload_libraries documentation
The introduction in the Shared Library Preloading section already
instructs the user to separate multiple library names with commas, so
just remove the fragment from here.
Alvaro Herrera [Tue, 10 Mar 2015 15:26:34 +0000 (12:26 -0300)]
Move BRIN page type to page's last two bytes
... which is the usual convention among AMs, so that pg_filedump and
similar utilities can tell apart pages of different AMs. It was also
the intent of the original code, but I failed to realize that alignment
considerations would move the whole thing to the previous-to-last word
in the page.
The new definition of the associated macro makes surrounding code a bit
leaner, too.
Per note from Heikki at
http://www.postgresql.org/message-id/546A16EF.9070005@vmware.com
Robert Haas [Tue, 10 Mar 2015 14:59:11 +0000 (10:59 -0400)]
Allow named parameters to be specified using => in addition to :=
SQL has standardized on => as the use of to specify named parameters,
and we've wanted for many years to support the same syntax ourselves,
but this has been complicated by the possible use of => as an operator
name. In PostgreSQL 9.0, we began emitting a warning when an operator
named => was defined, and in PostgreSQL 9.2, we stopped shipping a
=>(text, text) operator as part of hstore. By the time the next major
version of PostgreSQL is released, => will have been deprecated for a
full five years, so hopefully there won't be too many people still
relying on it. We continue to support := for compatibility with
previous PostgreSQL releases.
Pavel Stehule, reviewed by Petr Jelinek, with a few documentation
tweaks by me.
Alvaro Herrera [Mon, 9 Mar 2015 20:44:00 +0000 (17:44 -0300)]
Keep CommitTs module in sync in standby and master
We allow this module to be turned off on restarts, so a restart time
check is enough to activate or deactivate the module; however, if there
is a standby replaying WAL emitted from a master which is restarted, but
the standby isn't, the state in the standby becomes inconsistent and can
easily be crashed.
Fix by activating and deactivating the module during WAL replay on
parameter change as well as on system start.
Problem reported by Fujii Masao in
http://www.postgresql.org/message-id/CAHGQGwFhJ3CnHo1CELEfay18yg_RA-XZT-7D8NuWUoYSZ90r4Q@mail.gmail.com
Alvaro Herrera [Mon, 9 Mar 2015 20:00:43 +0000 (17:00 -0300)]
Fix crasher bugs in previous commit
ALTER DEFAULT PRIVILEGES was trying to decode the list of roles in the
FOR clause as a list of names rather than of RoleSpecs; and the IN
clause in CREATE ROLE was doing the same thing. This was evidenced by
crashes on some buildfarm machines, though on my platform this doesn't
cause a failure by mere chance; I can reproduce the failures only by
adding some padding in struct RoleSpecs.
Fix by dereferencing those lists as being of RoleSpecs, not string
Values.
Alvaro Herrera [Mon, 9 Mar 2015 18:41:54 +0000 (15:41 -0300)]
Allow CURRENT/SESSION_USER to be used in certain commands
Commands such as ALTER USER, ALTER GROUP, ALTER ROLE, GRANT, and the
various ALTER OBJECT / OWNER TO, as well as ad-hoc clauses related to
roles such as the AUTHORIZATION clause of CREATE SCHEMA, the FOR clause
of CREATE USER MAPPING, and the FOR ROLE clause of ALTER DEFAULT
PRIVILEGES can now take the keywords CURRENT_USER and SESSION_USER as
user specifiers in place of an explicit user name.
This commit also fixes some quite ugly handling of special standards-
mandated syntax in CREATE USER MAPPING, which in particular would fail
to work in presence of a role named "current_user".
The special role specifiers PUBLIC and NONE also have more consistent
handling now.
Also take the opportunity to add location tracking to user specifiers.
Authors: Kyotaro Horiguchi. Heavily reworked by Álvaro Herrera.
Reviewed by: Rushabh Lathia, Adam Brightwell, Marti Raudsepp.
Robert Haas [Mon, 9 Mar 2015 14:35:41 +0000 (10:35 -0400)]
Fix handling of sortKeys field in Tuplesortstate.
Commit 5cefbf5a6c4466ac6b1cc2a4316b4eba9108c802 introduced an
assumption that this field would always be non-NULL when doing a merge
pass, but that's not true. Without this fix, you can crash the server
by building a hash index that is sufficiently large relative to
maintenance_work_mem, or by triggering a large datum sort.
Commit 5ea86e6e65dd2da3e9a3464484985d48328e7fe3 changed the comments
for that field to say that it would be set in all cases except for the
hash index case, but that wasn't (and still isn't) true.
The datum-sort failure was spotted by Tomas Vondra; initial analysis
of that failure was by Peter Geoghegan. The remaining issues were
spotted by me during review of the surrounding code, and the patch is
all my fault.
Move WAL-related definitions from dbcommands.h to separate header file.
This makes it easier to write frontend programs that needs to understand
the WAL record format of CREATE/DROP DATABASE. dbcommands.h cannot easily
be #included in a frontend program, because it pulls in other header files
that need backend stuff, but the new dbcommands_xlog.h header file has
fewer dependencies.
projects / postgresql / log