Peter Eisentraut [Fri, 27 Jan 2012 18:16:17 +0000 (20:16 +0200)]
Hide most variable-length fields from Form_pg_* structs
Those fields only appear in the structs so that genbki.pl can create
the BKI bootstrap files for the catalogs. But they are not actually
usable from C. So hiding them can prevent coding mistakes, saves
stack space, and can help the compiler.
In certain catalogs, the first variable-length field has been kept
visible after manual inspection. These exceptions are noted in C
comments.
Peter Eisentraut [Fri, 27 Jan 2012 18:08:34 +0000 (20:08 +0200)]
Do not access indclass through Form_pg_index
Normally, accessing variable-length members of catalog structures past
the first one doesn't work at all. Here, it happened to work because
indnatts was checked to be 1, and so the defined FormData_pg_index
layout, using int2vector[1] and oidvector[1] for variable-length
arrays, happened to match the actual memory layout. But it's a very
fragile assumption, and it's not in a performance-critical path, so
code it properly using heap_getattr() instead.
Robert Haas [Thu, 26 Jan 2012 19:43:28 +0000 (14:43 -0500)]
Adjust tuplesort.c based on the fact that we never use the OS's qsort().
Our own qsort_arg() implementation doesn't have the defect previously
observed to affect only QNX 4, so it seems sufficiently to assert that
it isn't broken rather than retesting. Also, update a few comments to
clarify why it's valuable to retain a tie-break rule based on CTID
during index builds.
Robert Haas [Thu, 26 Jan 2012 17:44:30 +0000 (12:44 -0500)]
Be more clear when a new column name collides with a system column name.
We now use the same error message for ALTER TABLE .. ADD COLUMN or
ALTER TABLE .. RENAME COLUMN that we do for CREATE TABLE. The old
message was accurate, but might be confusing to users not aware of our
system columns.
Vik Reykja, with some changes by me, and further proofreading by Tom Lane
Make bgwriter sleep longer when it has no work to do, to save electricity.
To make it wake up promptly when activity starts again, backends nudge it
by setting a latch in MarkBufferDirty(). The latch is kept set while
bgwriter is active, so there is very little overhead from that when the
system is busy. It is only armed before going into longer sleep.
Robert Haas [Thu, 26 Jan 2012 13:21:31 +0000 (08:21 -0500)]
Damage control for yesterday's CheckIndexCompatible changes.
Rip out a regression test that doesn't play well with settings put in
place by the build farm, and rewrite the code in CheckIndexCompatible
in a hopefully more transparent style.
Alvaro Herrera [Wed, 25 Jan 2012 21:06:00 +0000 (18:06 -0300)]
Have \copy go through SendQuery
This enables a bunch of features, notably ON_ERROR_ROLLBACK. It also
makes COPY failure (either in the server or psql) as a whole behave more
sanely in psql.
Additionally, having more commands in the same command line as COPY
works better (though since psql splits lines at semicolons, this doesn't
matter much unless you're using -c).
Also tighten a couple of switches on PQresultStatus() to add
PGRES_COPY_BOTH support and stop assuming that unknown statuses received
are errors; have those print diagnostics where warranted.
Robert Haas [Wed, 25 Jan 2012 20:28:07 +0000 (15:28 -0500)]
Make CheckIndexCompatible simpler and more bullet-proof.
This gives up the "don't rewrite the index" behavior in a couple of
relatively unimportant cases, such as changing between an array type
and an unconstrained domain over that array type, in return for
making this code more future-proof.
Simon Riggs [Wed, 25 Jan 2012 18:02:04 +0000 (18:02 +0000)]
Allow pg_basebackup from standby node with safety checking.
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
Bruce Momjian [Wed, 25 Jan 2012 14:35:17 +0000 (09:35 -0500)]
Now that the shared library name can be adjusted in the library test,
have pg_upgrade allocate a maximum fixed size buffer for testing the
library file name, rather than base the allocation on the library name.
Simon Riggs [Tue, 24 Jan 2012 20:22:37 +0000 (20:22 +0000)]
Add new replication mode synchronous_commit = 'write'.
Replication occurs only to memory on standby, not to disk,
so provides additional performance if user wishes to
reduce durability level slightly. Adds concept of multiple
independent sync rep queues.
Robert Haas [Tue, 24 Jan 2012 13:38:20 +0000 (08:38 -0500)]
Adjustments to regression tests for security_barrier views.
Drop the role we create, so regression tests pass even when run more
than once against the same cluster, a problem noted by Tom Lane and
Jeff Janes. Also, rename the temporary role so that it starts with
"regress_", to make it unlikely that we'll collide with an existing
role name while running "make installcheck", per further gripe from
Tom Lane.
Simon Riggs [Mon, 23 Jan 2012 23:37:32 +0000 (23:37 +0000)]
Resolve timing issue with logging locks for Hot Standby.
We log AccessExclusiveLocks for replay onto standby nodes,
but because of timing issues on ProcArray it is possible to
log a lock that is still held by a just committed transaction
that is very soon to be removed. To avoid any timing issue we
avoid applying locks made by transactions with InvalidXid.
Simon Riggs, bug report Tom Lane, diagnosis Pavan Deolasee
Magnus Hagander [Thu, 19 Jan 2012 13:19:20 +0000 (14:19 +0100)]
Separate state from query string in pg_stat_activity
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
Fix corner case in cleanup of transactions using SSI.
When the only remaining active transactions are READ ONLY, we do a "partial
cleanup" of committed transactions because certain types of conflicts
aren't possible anymore. For committed r/w transactions, we release the
SIREAD locks but keep the SERIALIZABLEXACT. However, for committed r/o
transactions, we can go further and release the SERIALIZABLEXACT too. The
problem was with the latter case: we were returning the SERIALIZABLEXACT to
the free list without removing it from the finished list.
The only real change in the patch is the SHMQueueDelete line, but I also
reworked some of the surrounding code to make it obvious that r/o and r/w
transactions are handled differently -- the existing code felt a bit too
clever.
Alvaro Herrera [Mon, 16 Jan 2012 22:19:42 +0000 (19:19 -0300)]
Disallow merging ONLY constraints in children tables
When creating a child table, or when attaching an existing table as
child of another, we must not allow inheritable constraints to be
merged with non-inheritable ones, because then grandchildren would not
properly get the constraint. This would violate the grandparent's
expectations.
Robert Haas [Mon, 16 Jan 2012 14:34:21 +0000 (09:34 -0500)]
Prevent adding relations to a concurrently dropped schema.
In the previous coding, it was possible for a relation to be created
via CREATE TABLE, CREATE VIEW, CREATE SEQUENCE, CREATE FOREIGN TABLE,
etc. in a schema while that schema was meanwhile being concurrently
dropped. This led to a pg_class entry with an invalid relnamespace
value. The same problem could occur if a relation was moved using
ALTER .. SET SCHEMA while the target schema was being concurrently
dropped. This patch prevents both of those scenarios by locking the
schema to which the relation is being added using AccessShareLock,
which conflicts with the AccessExclusiveLock taken by DROP.
As a desirable side effect, this also prevents the use of CREATE OR
REPLACE VIEW to queue for an AccessExclusiveLock on a relation on which
you have no rights: that will now fail immediately with a permissions
error, before trying to obtain a lock.
We need similar protection for all other object types, but as everything
other than relations uses a slightly different set of code paths, I'm
leaving that for a separate commit.
Original complaint (as far as I could find) about CREATE by Nikhil
Sontakke; risk for ALTER .. SET SCHEMA pointed out by Tom Lane;
further details by Dan Farina; patch by me; review by Hitoshi Harada.
Magnus Hagander [Sun, 15 Jan 2012 14:34:40 +0000 (15:34 +0100)]
Allow a user to kill his own queries using pg_cancel_backend()
Allows a user to use pg_cancel_queries() to cancel queries in
other backends if they are running under the same role.
pg_terminate_backend() still requires superuser permissoins.
Short patch, many authors working on the bikeshed: Magnus Hagander,
Josh Kupershmidt, Edward Muller, Greg Smith.
Alvaro Herrera [Sat, 14 Jan 2012 22:36:39 +0000 (19:36 -0300)]
Detect invalid permutations in isolationtester
isolationtester is now able to continue running other permutations when
it detects that one of them is invalid, which is useful during initial
development of spec files.
Make superuser imply replication privilege. The idea of a privilege that
superuser doesn't have doesn't make much sense, as a superuser can do
whatever he wants through other means, anyway. So instead of granting
replication privilege to superusers in CREATE USER time by default, allow
replication connection from superusers whether or not they have the
replication privilege.
Patch by Noah Misch, per discussion on bug report #6264
Robert Haas [Fri, 13 Jan 2012 13:22:31 +0000 (08:22 -0500)]
Fix broken logic in lazy_vacuum_heap.
As noted by Tom Lane, the previous coding in this area, which I
introduced in commit bbb6e559c4ea0fb4c346beda76736451dc24eb4e, was
poorly tested and caused the vacuum's second heap to go into what would
have been an infinite loop but for the fact that it eventually caused a
memory allocation failure. This version seems to work better.
Simon Riggs [Fri, 13 Jan 2012 13:02:44 +0000 (13:02 +0000)]
Correctly initialise shared recoveryLastRecPtr in recovery.
Previously we used ReadRecPtr rather than EndRecPtr, which was
not a serious error but caused pg_stat_replication to report
incorrect replay_location until at least one WAL record is replayed.
Tom Lane [Thu, 12 Jan 2012 21:40:14 +0000 (16:40 -0500)]
Fix CLUSTER/VACUUM FULL for toast values owned by recently-updated rows.
In commit 7b0d0e9356963d5c3e4d329a917f5fbb82a2ef05, I made CLUSTER and
VACUUM FULL try to preserve toast value OIDs from the original toast table
to the new one. However, if we have to copy both live and recently-dead
versions of a row that has a toasted column, those versions may well
reference the same toast value with the same OID. The patch then led to
duplicate-key failures as we tried to insert the toast value twice with the
same OID. (The previous behavior was not very desirable either, since it
would have silently inserted the same value twice with different OIDs.
That wastes space, but what's worse is that the toast values inserted for
already-dead heap rows would not be reclaimed by subsequent ordinary
VACUUMs, since they go into the new toast table marked live not deleted.)
To fix, check if the copied OID already exists in the new toast table, and
if so, assume that it stores the desired value. This is reasonably safe
since the only case where we will copy an OID from a previous toast pointer
is when toast_insert_or_update was given that toast pointer and so we just
pulled the data from the old table; if we got two different values that way
then we have big problems anyway. We do have to assume that no other
backend is inserting items into the new toast table concurrently, but
that's surely safe for CLUSTER and VACUUM FULL.
Per bug #6393 from Maxim Boguk. Back-patch to 9.0, same as the previous
patch.
Tom Lane [Thu, 12 Jan 2012 19:18:08 +0000 (14:18 -0500)]
Tweak duplicate-index-column regression test to avoid locale sensitivity.
The originally-chosen test case gives different results in es_EC locale
because of unusual rule for sorting strings beginning with "LL". Adjust
the comparison value to avoid that, while hopefully not introducing new
locale dependencies elsewhere. Per report from Jaime Casanova.
Alvaro Herrera [Wed, 11 Jan 2012 21:46:18 +0000 (18:46 -0300)]
Validate number of steps specified in permutation
A permutation that specifies more steps than defined causes
isolationtester to crash, so avoid that. Using less steps than defined
should probably not be a problem, but no spec currently does that.
Refactor XLogInsert a bit. The rdata entries for backup blocks are now
constructed before acquiring WALInsertLock, which slightly reduces the time
the lock is held. Although I could not measure any benefit in benchmarks,
the code is more readable this way.
Tom Lane [Tue, 10 Jan 2012 00:56:27 +0000 (19:56 -0500)]
Fix one-byte buffer overrun in contrib/test_parser.
The original coding examined the next character before verifying that
there *is* a next character. In the worst case with the input buffer
right up against the end of memory, this would result in a segfault.
Problem spotted by Paul Guyot; this commit extends his patch to fix an
additional case. In addition, make the code a tad more readable by not
overloading the usage of *tlen.
Add compatibility note about grant options on GRANT reference page
Point out in the compatibility section that granting grant options to
PUBLIC is not supported by PostgreSQL. This is already mentioned
earlier, but since it concerns the information schema, it might be
worth pointing out explicitly as a compatibility issue.
Magnus Hagander [Mon, 9 Jan 2012 10:53:38 +0000 (11:53 +0100)]
Fix pg_basebackup for keepalive messages
Teach pg_basebackup in streaming mode to deal with keepalive messages.
Also change the order of checks to complain at the message rather than
block size when a new message is introduced.
In passing, switch to using sizeof() instead of hardcoded sizes for
WAL protocol structs.
Rename the internal structures of the CREATE TABLE (LIKE ...) facility
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly. This turned out to be very confusing, because it has
nothing to do with the INHERITS feature. So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
Tom Lane [Sat, 7 Jan 2012 20:38:52 +0000 (15:38 -0500)]
Use __sync_lock_test_and_set() for spinlocks on ARM, if available.
Historically we've used the SWPB instruction for TAS() on ARM, but this
is deprecated and not available on ARMv6 and later. Instead, make use
of a GCC builtin if available. We'll still fall back to SWPB if not,
so as not to break existing ports using older GCC versions.
Eventually we might want to try using __sync_lock_test_and_set() on some
other architectures too, but for now that seems to present only risk and
not reward.
Back-patch to all supported versions, since people might want to use any
of them on more recent ARM chips.
Robert Haas [Sat, 7 Jan 2012 03:56:00 +0000 (22:56 -0500)]
Slightly reorganize struct SnapshotData.
This squeezes out a bunch of alignment padding, reducing the size
from 72 to 56 bytes on my machine. At least in my testing, this
didn't produce any measurable performance improvement, but the space
savings seem like enough justification.
Robert Haas [Sat, 7 Jan 2012 03:42:26 +0000 (22:42 -0500)]
Improve behavior of concurrent ALTER TABLE, and do some refactoring.
ALTER TABLE (and ALTER VIEW, ALTER SEQUENCE, etc.) now use a
RangeVarGetRelid callback to check permissions before acquiring a table
lock. We also now use the same callback for all forms of ALTER TABLE,
rather than having separate, almost-identical callbacks for ALTER TABLE
.. SET SCHEMA and ALTER TABLE .. RENAME, and no callback at all for
everything else.
I went ahead and changed the code so that no form of ALTER TABLE works
on foreign tables; you must use ALTER FOREIGN TABLE instead. In 9.1,
it was possible to use ALTER TABLE .. SET SCHEMA or ALTER TABLE ..
RENAME on a foreign table, but not any other form of ALTER TABLE, which
did not seem terribly useful or consistent.
Robert Haas [Fri, 6 Jan 2012 19:30:23 +0000 (14:30 -0500)]
Make the number of CLOG buffers adaptive, based on shared_buffers.
Previously, this was hardcoded: we always had 8. Performance testing
shows that isn't enough, especially on big SMP systems, so we allow it
to scale up as high as 32 when there's adequate memory. On the flip
side, when shared_buffers is very small, drop the number of CLOG buffers
down to as little as 4, so that we can start the postmaster even
when very little shared memory is available.
Per extensive discussion with Simon Riggs, Tom Lane, and others on
pgsql-hackers.
Tom Lane [Fri, 6 Jan 2012 18:04:09 +0000 (13:04 -0500)]
Fix pg_restore's direct-to-database mode for INSERT-style table data.
In commit 6545a901aaf84cb05212bb6a7674059908f527c3, I removed the mini SQL
lexer that was in pg_backup_db.c, thinking that it had no real purpose
beyond separating COPY data from SQL commands, which purpose had been
obsoleted by long-ago fixes in pg_dump's archive file format.
Unfortunately this was in error: that code was also used to identify
command boundaries in INSERT-style table data, which is run together as a
single string in the archive file for better compressibility. As a result,
direct-to-database restores from archive files made with --inserts or
--column-inserts fail in our latest releases, as reported by Dick Visser.
To fix, restore the mini SQL lexer, but simplify it by adjusting the
calling logic so that it's only required to cope with INSERT-style table
data, not arbitrary SQL commands. This allows us to not have to deal with
SQL comments, E'' strings, or dollar-quoted strings, none of which have
ever been emitted by dumpTableData_insert.
Also, fix the lexer to cope with standard-conforming strings, which was the
actual bug that the previous patch was meant to solve.
Back-patch to all supported branches. The previous patch went back to 8.2,
which unfortunately means that the EOL release of 8.2 contains this bug,
but I don't think we're doing another 8.2 release just because of that.
Robert Haas [Fri, 6 Jan 2012 13:32:32 +0000 (08:32 -0500)]
Fix variable confusion in BufferSync().
As noted by Heikki Linnakangas, the previous coding confused the "flags"
variable with the "mask" variable. The affect of this appears to be that
unlogged buffers would get written out at every checkpoint rather than
only at shutdown time. Although that's arguably an acceptable failure
mode, I'm back-patching this change, since it seems like a poor idea to
rely on this happening to work.
pg_dump: Dump operators with the same name ordered by arity
pg_dump sorts operators by name, but operators with the same name come
out in random order. Now operators with the same name are dumped in
the order prefix, postfix, infix. (This is consistent with functions,
which are dumped in increasing number of argument order.)
Improve ALTER DOMAIN / DROP CONSTRAINT with nonexistent constraint
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
Andrew Dunstan [Thu, 5 Jan 2012 17:01:18 +0000 (12:01 -0500)]
Work around perl bug in SvPVutf8().
Certain things like typeglobs or readonly things like $^V cause
perl's SvPVutf8() to die nastily and crash the backend. To avoid
that bug we make a copy of the object, which will subsequently be
garbage collected.
Back patched to 9.1 where we first started using SvPVutf8().
Per -hackers discussion. Original problem reported by David Wheeler.
Tom Lane [Wed, 4 Jan 2012 23:30:55 +0000 (18:30 -0500)]
Make executor's SELECT INTO code save and restore original tuple receiver.
As previously coded, the QueryDesc's dest pointer was left dangling
(pointing at an already-freed receiver object) after ExecutorEnd. It's a
bit astonishing that it took us this long to notice, and I'm not sure that
the known problem case with SQL functions is the only one. Fix it by
saving and restoring the original receiver pointer, which seems the most
bulletproof way of ensuring any related bugs are also covered.
Per bug #6379 from Paul Ramsey. Back-patch to 8.4 where the current
handling of SELECT INTO was introduced.