Add explicit collation on the trigger name to avoid locale dependencies.
Also restrict the tables selected, to avoid interference from
concurrently running tests.
Magnus Hagander [Wed, 7 Feb 2018 09:53:56 +0000 (10:53 +0100)]
Change default git repo URL to https
Since we now support the server side handler for git over https (so
we're no longer using the "dumb protocol"), make https the primary
choice for cloning the repository, and the git protocol the secondary
choice.
In passing, also change the links to git-scm.com from http to https.
Reviewed by Stefan Kaltenbrunner and David G. Johnston
Tom Lane [Wed, 7 Feb 2018 05:06:50 +0000 (00:06 -0500)]
Support all SQL:2011 options for window frame clauses.
This patch adds the ability to use "RANGE offset PRECEDING/FOLLOWING"
frame boundaries in window functions. We'd punted on that back in the
original patch to add window functions, because it was not clear how to
do it in a reasonably data-type-extensible fashion. That problem is
resolved here by adding the ability for btree operator classes to provide
an "in_range" support function that defines how to add or subtract the
RANGE offset value. Factoring it this way also allows the operator class
to avoid overflow problems near the ends of the datatype's range, if it
wishes to expend effort on that. (In the committed patch, the integer
opclasses handle that issue, but it did not seem worth the trouble to
avoid overflow failures for datetime types.)
The patch includes in_range support for the integer_ops opfamily
(int2/int4/int8) as well as the standard datetime types. Support for
other numeric types has been requested, but that seems like suitable
material for a follow-on patch.
In addition, the patch adds GROUPS mode which counts the offset in
ORDER-BY peer groups rather than rows, and it adds the frame_exclusion
options specified by SQL:2011. As far as I can see, we are now fully
up to spec on window framing options.
Existing behaviors remain unchanged, except that I changed the errcode
for a couple of existing error reports to meet the SQL spec's expectation
that negative "offset" values should be reported as SQLSTATE 22013.
Internally and in relevant parts of the documentation, we now consistently
use the terminology "offset PRECEDING/FOLLOWING" rather than "value
PRECEDING/FOLLOWING", since the term "value" is confusingly vague.
Oliver Ford, reviewed and whacked around some by me
Robert Haas [Tue, 6 Feb 2018 19:24:57 +0000 (14:24 -0500)]
Avoid valgrind complaint about write() of uninitalized bytes.
LogicalTapeFreeze() may write out its first block when it is dirty but
not full, and then immediately read the first block back in from its
BufFile as a BLCKSZ-width block. This can only occur in rare cases
where very few tuples were written out, which is currently only
possible with parallel external tuplesorts. To avoid valgrind
complaints, tell it to treat the tail of logtape.c's buffer as
defined.
Commit 9da0cc35284bdbe8d442d732963303ff0e0a40bc exposed this problem
but did not create it. LogicalTapeFreeze() has always tended to write
out some amount of garbage bytes, but previously never wrote less than
one block of data in total, so the problem was masked.
Per buildfarm members lousyjack and skink.
Peter Geoghegan, based on a suggestion from Tom Lane and me. Some
comment revisions by me.
Tom Lane [Tue, 6 Feb 2018 18:52:27 +0000 (13:52 -0500)]
Doc: move info for btree opclass implementors into main documentation.
Up to now, useful info for writing a new btree opclass has been buried
in the backend's nbtree/README file. Let's move it into the SGML docs,
in preparation for extending it with info about "in_range" functions
in the upcoming window RANGE patch.
To do this, I chose to create a new chapter for btree indexes in Part VII
(Internals), parallel to the chapters that exist for the newer index AMs.
This is a pretty short chapter as-is. At some point somebody might care
to flesh it out with more detail about btree internals, but that is
beyond the scope of my ambition for today.
Robert Haas [Mon, 5 Feb 2018 22:31:57 +0000 (17:31 -0500)]
Fix possible crash in partition-wise join.
The previous code assumed that we'd always succeed in creating
child-joins for a joinrel for which partition-wise join was considered,
but that's not guaranteed, at least in the case where dummy rels
are involved.
Tom Lane [Mon, 5 Feb 2018 15:58:27 +0000 (10:58 -0500)]
Ensure that all temp files made during pg_upgrade are non-world-readable.
pg_upgrade has always attempted to ensure that the transient dump files
it creates are inaccessible except to the owner. However, refactoring
in commit 76a7650c4 broke that for the file containing "pg_dumpall -g"
output; since then, that file was protected according to the process's
default umask. Since that file may contain role passwords (hopefully
encrypted, but passwords nonetheless), this is a particularly unfortunate
oversight. Prudent users of pg_upgrade on multiuser systems would
probably run it under a umask tight enough that the issue is moot, but
perhaps some users are depending only on pg_upgrade's umask changes to
protect their data.
To fix this in a future-proof way, let's just tighten the umask at
process start. There are no files pg_upgrade needs to write at a
weaker security level; and if there were, transiently relaxing the
umask around where they're created would be a safer approach.
Report and patch by Tom Lane; the idea for the fix is due to Noah Misch.
Back-patch to all supported branches.
Tom Lane [Mon, 5 Feb 2018 15:37:30 +0000 (10:37 -0500)]
Fix RelationBuildPartitionKey's processing of partition key expressions.
Failure to advance the list pointer while reading partition expressions
from a list results in invoking an input function with inappropriate data,
possibly leading to crashes or, with carefully crafted input, disclosure
of arbitrary backend memory.
Bug discovered independently by Álvaro Herrera and David Rowley.
This patch is by Álvaro but owes something to David's proposed fix.
Back-patch to v10 where the issue was introduced.
Tom Lane [Mon, 5 Feb 2018 03:14:07 +0000 (22:14 -0500)]
Skip setting up shared instrumentation for Hash node if not needed.
We don't need to set up the shared space for hash join instrumentation data
if instrumentation hasn't been requested. Let's follow the example of the
similar Sort node code and save a few cycles by skipping that when we can.
This reverts commit d59ff4ab3 and instead allows us to use the safer choice
of passing noError = false to shm_toc_lookup in ExecHashInitializeWorker,
since if we reach that call there should be a TOC entry to be found.
Tom Lane [Fri, 2 Feb 2018 23:32:05 +0000 (18:32 -0500)]
Fix another instance of unsafe coding for shm_toc_lookup failure.
One or another author of commit 5bcf389ec seems to have thought that
computing an offset from a NULL pointer would yield another NULL pointer.
There may possibly be architectures where that works, but common machines
don't work like that. Per a quick code review of places calling
shm_toc_lookup and not using noError = false.
Tom Lane [Fri, 2 Feb 2018 23:26:07 +0000 (18:26 -0500)]
Be more wary about shm_toc_lookup failure.
Commit 445dbd82a basically missed the point of commit d46633506,
which was that we shouldn't allow shm_toc_lookup() failure to lead
to a core dump or assertion crash, because the odds of such a
failure should never be considered negligible. It's correct that
we can't expect the PARALLEL_KEY_ERROR_QUEUE TOC entry to be there
if we have no workers. But if we have no workers, we're not going
to do anything in this function with the lookup result anyway,
so let's just skip it. That lets the code use the easy-to-prove-safe
noError=false case, rather than anything requiring effort to review.
Investigation of 2d2d06b7e27e3177d5bef0061801c75946871db3 revealed that
identity values were not applied in some further cases, including
logical replication subscribers, VALUES RTEs, and ALTER TABLE ... ADD
COLUMN. To fix all that, apply the identity column expression in
build_column_default() instead of repeating the same logic at each call
site.
For ALTER TABLE ... ADD COLUMN ... IDENTITY, the previous coding
completely ignored that existing rows for the new column should have
values filled in from the identity sequence. The coding using
build_column_default() fails for this because the sequence ownership
isn't registered until after ALTER TABLE, and we can't do it before
because we don't have the column in the catalog yet. So we specially
remember in ColumnDef the sequence name that we decided on and build a
custom NextValueExpr using that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Robert Haas [Fri, 2 Feb 2018 18:25:55 +0000 (13:25 -0500)]
Support parallel btree index builds.
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Robert Haas [Fri, 2 Feb 2018 14:23:42 +0000 (09:23 -0500)]
Refactor code for partition bound searching
Remove partition_bound_cmp() and partition_bound_bsearch(), whose
void * argument could be, depending on the situation, of any of
three different types: PartitionBoundSpec *, PartitionRangeBound *,
Datum *.
Instead, introduce separate bound-searching functions for each
situation: partition_list_bsearch, partition_range_bsearch,
partition_range_datum_bsearch, and partition_hash_bsearch. This
requires duplicating the code for binary search, but it makes the
code much more type safe, involves fewer branches at runtime, and
at least in my opinion, is much easier to understand.
Along the way, add an option to partition_range_datum_bsearch
allowing the number of keys to be specified, so that we can search
for partitions based on a prefix of the full list of partition
keys. This is important for pending work to improve partition
pruning.
Robert Haas [Fri, 2 Feb 2018 14:00:59 +0000 (09:00 -0500)]
Add new function WaitForParallelWorkersToAttach.
Once this function has been called, we know that all workers have
started and attached to their error queues -- so if any of them
subsequently exit uncleanly, we'll be sure to throw an ERROR promptly.
Otherwise, users of the ParallelContext machinery must be careful not
to wait forever for a worker that has failed to start. Parallel query
manages to work without needing this for reasons explained in new
comments added by this patch, but it's a useful primitive for other
parallel operations, such as the pending patch to make creating a
btree index run in parallel.
Amit Kapila, revised by me. Additional review by Peter Geoghegan.
Bruce Momjian [Thu, 1 Feb 2018 13:30:43 +0000 (08:30 -0500)]
psql: Add quit/help behavior/hint, for other tool portability
Issuing 'quit'/'exit' in an empty psql buffer exits psql. Issuing
'quit'/'exit' in a non-empty psql buffer alone on a line with no prefix
whitespace issues a hint on how to exit.
Also add similar 'help' hints for 'help' in a non-empty psql buffer.
Bruce Momjian [Wed, 31 Jan 2018 21:43:32 +0000 (16:43 -0500)]
doc: Improve pg_upgrade rsync examples to use clusterdir
Commit 9521ce4a7a1125385fb4de9689f345db594c516a from Sep 13, 2017 and
backpatched through 9.5 used rsync examples with datadir. The reporter
has pointed out, and testing has verified, that clusterdir must be used,
so update the docs accordingly.
Reported-by: Don Seiler
Discussion: https://postgr.es/m/CAHJZqBD0u9dCERpYzK6BkRv=663AmH==DFJpVC=M4Xg_rq2=CQ@mail.gmail.com
Bruce Momjian [Wed, 31 Jan 2018 21:25:21 +0000 (16:25 -0500)]
doc: mention datadir locations are actually config locations
Technically, pg_upgrade's --old-datadir and --new-datadir are
configuration directories, not necessarily data directories. This is
reflected in the 'postgres' manual page, so do the same for pg_upgrade.
Robert Haas [Wed, 31 Jan 2018 20:43:11 +0000 (15:43 -0500)]
Fix list partition constraints for partition keys of array type.
The old code generated always generated a constraint of the form
col = ANY(ARRAY[val1, val2, ...]), but that's invalid when col is an
array type. Instead, generate col = val when there's only one value,
col = val1 OR col = val2 OR ... when there are multiple values and
col is of array type, and the old form when there are multiple values
and col is not of an array type.
As a side benefit, this makes constraint exclusion able to prune
a list partition declared to accept a single Boolean value, which
didn't work before.
Move the generic functions into a new file fe-secure-common.c, so the
calls generally go fe-connect.c -> fe-secure.c -> fe-secure-${impl}.c ->
fe-secure-common.c, although there is a bit of back-and-forth between
the last two.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Robert Haas [Tue, 30 Jan 2018 19:27:38 +0000 (14:27 -0500)]
Fix test case for 'outer pathkeys do not match mergeclauses' fix.
Commit 4bbf6edfbd5d03743ff82dda2f00c738fb3208f5 added a test case,
but it turns out that the test case doesn't reliably test for the
bug, and in the context of the regression test suite did not because
ANALYZE had not been run.
Report and patch by Etsuro Fujita. I added a comment along lines
previously suggested by Tom Lane.
Andres Freund [Mon, 29 Jan 2018 20:16:53 +0000 (12:16 -0800)]
Introduce ExecQualAndReset() helper.
It's a common task to evaluate a qual and reset the corresponding
expression context. Currently that requires storing the result of the
qual eval, resetting the context, and then reacting on the result. As
that's awkward several places only reset the context next time through
a node. That's not great, so introduce a helper that evaluates and
resets.
It's a bit ugly that it currently uses MemoryContextReset() instead of
ResetExprContext(), but that seems easier than reordering all of
executor.h.
Author: Andres Freund
Discussion: https://postgr.es/m/20180109222544.f7loxrunqh3xjl5f@alap3.anarazel.de
Tom Lane [Mon, 29 Jan 2018 20:13:07 +0000 (15:13 -0500)]
Save a few bytes by removing useless last argument to SearchCatCacheList.
There's never any value in giving a fully specified cache key to
SearchCatCacheList: you might as well call SearchCatCache instead,
since there could be only one match. So the maximum useful number of
key arguments is one less than the supported number of key columns.
We might as well remove the useless extra argument and save some few
bytes per call site, as well as a cycle or so per call.
I believe the reason it was coded like this is that originally, callers
had to write out all the dummy arguments in each call, and so it seemed
less confusing if SearchCatCache and SearchCatCacheList took the same
number of key arguments. But since commit e26c539e9, callers only write
their live arguments explicitly, making that a non-factor; and there's
surely been enough time for third-party modules to adapt to that coding
style. So this is only an ABI break not an API break for callers.
Per discussion with Oliver Ford, this might also make it less confusing
how to use SearchCatCacheList correctly.
Andres Freund [Wed, 24 Jan 2018 07:20:02 +0000 (23:20 -0800)]
Initialize unused ExprEvalStep fields.
ExecPushExprSlots didn't initialize ExprEvalStep's resvalue/resnull
steps as it didn't use them. That caused wrong valgrind warnings for
an upcoming patch, so zero-intialize.
Also zero-initialize all scratch ExprEvalStep's allocated on the
stack, to avoid issues with similar future omissions of non-critial
data.
Peter Eisentraut [Mon, 29 Jan 2018 19:26:17 +0000 (14:26 -0500)]
doc: Clarify pg_upgrade documentation
Clarify that the restriction against reg* types only applies to table
columns using these types, not to the type appearing in any other way,
for example as a function argument.
Andres Freund [Mon, 29 Jan 2018 19:02:09 +0000 (11:02 -0800)]
Prevent growth of simplehash tables when they're "too empty".
In cases where simplehash tables where filled with either a lot of
conflicting hash-values, or values that hash to consecutive
values (i.e. build "chains") the growth heuristics in d4c62a6b623d6eef88218158e9fa3cf974c6c7e5 could trigger rather
explosively.
To fix that, address some of the reasons (see previous commit) of why
the growth heuristics where needed, and only allow growth when the
table isn't too empty. While that means there's a few cases of bad
input that can be slower, that seems a lot better than running very
quickly out of memory.
Author: Tomas Vondra and Andres Freund, with additional input by
Thomas Munro, Tom Lane Todd A. Cook Reported-By: Todd A. Cook, Tomas Vondra, Thomas Munro
Discussion: https://postgr.es/m/20171127185700.1470.20362@wrigleys.postgresql.org
Backpatch: 10, where simplehash was introduced
Andres Freund [Mon, 29 Jan 2018 19:02:09 +0000 (11:02 -0800)]
Improve bit perturbation in TupleHashTableHash.
The changes in b81b5a96f424531b97cdd1dba97d9d1b9c9d372e did not fully
address the issue, because the bit-mixing of the IV into the final
hash-key didn't prevent clustering in the input-data survive in the
output data.
This didn't cause a lot of problems because of the additional growth
conditions added d4c62a6b623d6eef88218158e9fa3cf974c6c7e5. But as we
want to rein those in due to explosive growth in some edges, this
needs to be fixed.
Author: Andres Freund
Discussion: https://postgr.es/m/20171127185700.1470.20362@wrigleys.postgresql.org
Backpatch: 10, where simplehash was introduced
Tom Lane [Mon, 29 Jan 2018 17:57:09 +0000 (12:57 -0500)]
Avoid misleading psql password prompt when username is multiply specified.
When a password is needed, cases such as
psql -d "postgresql://alice@localhost/testdb" -U bob
would incorrectly prompt for "Password for user bob: ", when actually the
connection will be attempted with username alice. The priority order of
which name to use isn't that important here, but the misleading prompt is.
When we are prompting for a password after initial connection failure,
we can fix this reliably by looking at PQuser(conn) to see how libpq
interpreted the connection arguments. But when we're doing a forced
password prompt because of a -W switch, we can't use that solution.
Fortunately, because the main use of -W is for noninteractive situations,
it's less critical to produce a helpful prompt in such cases. I made
the startup prompt for -W just say "Password: " all the time, rather
than expending extra code on trying to identify which username to use.
In the case of a \c command (after -W has been given), there's already
logic in do_connect that determines whether the "dbname" is a connstring
or URI, so we can avoid lobotomizing the prompt except in cases that
are actually dubious. (We could do similarly in startup.c if anyone
complains, but for now it seems not worthwhile, especially since that
would still be only a partial solution.)
Per bug #15025 from Akos Vandra. Although this is arguably a bug fix,
it doesn't seem worth back-patching. The case where it matters seems
like a very corner-case usage, and someone might complain that we'd
changed the behavior of -W in a minor release.
Tom Lane [Sun, 28 Jan 2018 18:39:07 +0000 (13:39 -0500)]
Add stack-overflow guards in set-operation planning.
create_plan_recurse lacked any stack depth check. This is not per
our normal coding rules, but I'd supposed it was safe because earlier
planner processing is more complex and presumably should eat more
stack. But bug #15033 from Andrew Grossman shows this isn't true,
at least not for queries having the form of a many-thousand-way
INTERSECT stack.
Further testing showed that recurse_set_operations is also capable
of being crashed in this way, since it likewise will recurse to the
bottom of a parsetree before calling any support functions that
might themselves contain any stack checks. However, its stack
consumption is only perhaps a third of create_plan_recurse's.
It's possible that this particular problem with create_plan_recurse can
only manifest in 9.6 and later, since before that we didn't build a Path
tree for set operations. But having seen this example, I now have no
faith in the proposition that create_plan_recurse doesn't need a stack
check, so back-patch to all supported branches.
Tom Lane [Sat, 27 Jan 2018 21:42:28 +0000 (16:42 -0500)]
Update time zone data files to tzdata release 2018c.
DST law changes in Brazil, Sao Tome and Principe. Historical corrections
for Bolivia, Japan, and South Sudan. The "US/Pacific-New" zone has been
removed (it was only a link to America/Los_Angeles anyway).
Tom Lane [Sat, 27 Jan 2018 18:52:24 +0000 (13:52 -0500)]
Avoid crash during EvalPlanQual recheck of an inner indexscan.
Commit 09529a70b changed nodeIndexscan.c and nodeIndexonlyscan.c to
postpone initialization of the indexscan proper until the first tuple
fetch. It overlooked the question of mark/restore behavior, which means
that if some caller attempts to mark the scan before the first tuple fetch,
you get a null pointer dereference.
The only existing user of mark/restore is nodeMergejoin.c, which (somewhat
accidentally) will never attempt to set a mark before the first inner tuple
unless the inner child node is a Material node. Hence the case can't arise
normally, so it seems sufficient to document the assumption at both ends.
However, during an EvalPlanQual recheck, ExecScanFetch doesn't call
IndexNext but just returns the jammed-in test tuple. Therefore, if we're
doing a recheck in a plan tree with a mergejoin with inner indexscan,
it's possible to reach ExecIndexMarkPos with iss_ScanDesc still null,
as reported by Guo Xiang Tan in bug #15032.
Really, when there's a test tuple supplied during an EPQ recheck, touching
the index at all is the wrong thing: rather, the behavior of mark/restore
ought to amount to saving and restoring the es_epqScanDone flag. We can
avoid finding a place to actually save the flag, for the moment, because
given the assumption that no caller will set a mark before fetching a
tuple, es_epqScanDone must always be set by the time we try to mark.
So the actual behavior change required is just to not reach the index
access if a test tuple is supplied.
The set of plan node types that need to consider this issue are those
that support EPQ test tuples (i.e., call ExecScan()) and also support
mark/restore; which is to say, IndexScan, IndexOnlyScan, and perhaps
CustomScan. It's tempting to try to fix the problem in one place by
teaching ExecMarkPos() itself about EPQ; but ExecMarkPos supports some
plan types that aren't Scans, and also it seems risky to make assumptions
about what a CustomScan wants to do here. Also, the most likely future
change here is to decide that we do need to support marks placed before
the first tuple, which would require additional work in IndexScan and
IndexOnlyScan in any case. Hence, fix the EPQ issue in nodeIndexscan.c
and nodeIndexonlyscan.c, accepting the small amount of code duplicated
thereby, and leave it to CustomScan providers to fix this bug if they
have it.
Back-patch to v10 where commit 09529a70b came in. In earlier branches,
the index_markpos() call is a waste of cycles when EPQ is active, but
no more than that, so it doesn't seem appropriate to back-patch further.
Tom Lane [Fri, 26 Jan 2018 23:25:02 +0000 (18:25 -0500)]
Avoid unnecessary use of pg_strcasecmp for already-downcased identifiers.
We have a lot of code in which option names, which from the user's
viewpoint are logically keywords, are passed through the grammar as plain
identifiers, and then matched to string literals during command execution.
This approach avoids making words into lexer keywords unnecessarily. Some
places matched these strings using plain strcmp, some using pg_strcasecmp.
But the latter should be unnecessary since identifiers would have been
downcased on their way through the parser. Aside from any efficiency
concerns (probably not a big factor), the lack of consistency in this area
creates a hazard of subtle bugs due to different places coming to different
conclusions about whether two option names are the same or different.
Hence, standardize on using strcmp() to match any option names that are
expected to have been fed through the parser.
This does create a user-visible behavioral change, which is that while
formerly all of these would work:
alter table foo set (fillfactor = 50);
alter table foo set (FillFactor = 50);
alter table foo set ("fillfactor" = 50);
alter table foo set ("FillFactor" = 50);
now the last case will fail because that double-quoted identifier is
different from the others. However, none of our documentation says that
you can use a quoted identifier in such contexts at all, and we should
discourage doing so since it would break if we ever decide to parse such
constructs as true lexer keywords rather than poor man's substitutes.
So this shouldn't create a significant compatibility issue for users.
Daniel Gustafsson, reviewed by Michael Paquier, small changes by me
Robert Haas [Fri, 26 Jan 2018 20:03:12 +0000 (15:03 -0500)]
Factor some code out of create_grouping_paths.
This is preparatory refactoring to prepare the way for partition-wise
aggregate, which will reuse the new subroutines for child grouping
rels. It also does not seem like a bad idea on general principle,
as the function was getting pretty long.
Jeevan Chalke. The larger patch series of which this patch is a part
was reviewed and tested by Antonin Houska, Rajkumar Raghuwanshi,
Ashutosh Bapat, David Rowley, Dilip Kumar, Konstantin Knizhnik,
Pascal Legrand, and me. Some cosmetic changes by me.
Tom Lane [Fri, 26 Jan 2018 17:25:44 +0000 (12:25 -0500)]
Remove the obsolete WITH clause of CREATE FUNCTION.
This clause was superseded by SQL-standard syntax back in 7.3.
We've kept it around for backwards-compatibility purposes ever since;
but 15 years seems like long enough for that, especially seeing that
there are undocumented weirdnesses in how it interacts with the
SQL-standard syntax for specifying the same options.
Michael Paquier, per an observation by Daniel Gustafsson;
some small cosmetic adjustments to nearby code by me.
Peter Eisentraut [Thu, 25 Jan 2018 13:58:00 +0000 (08:58 -0500)]
Use abstracted SSL API in server connection log messages
The existing "connection authorized" server log messages used OpenSSL
API calls directly, even though similar abstracted API calls exist.
Change to use the latter instead.
Change the function prototype for the functions that return the TLS
version and the cipher to return const char * directly instead of
copying into a buffer. That makes them slightly easier to use.
Add bits= to the message. psql shows that, so we might as well show the
same information on the client and server.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se> Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Peter Eisentraut [Tue, 23 Jan 2018 16:19:12 +0000 (11:19 -0500)]
Remove byte-masking macros for Datum conversion macros
As the comment there stated, these were needed for old-style
user-defined functions, but since we removed support for those, we don't
need this anymore.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Tom Lane [Thu, 25 Jan 2018 20:27:24 +0000 (15:27 -0500)]
Support --no-comments in pg_dump, pg_dumpall, pg_restore.
We have switches already to suppress other subsidiary object properties,
such as ACLs, security labels, ownership, and tablespaces, so just on
the grounds of symmetry we should allow suppressing comments as well.
Also, commit 0d4e6ed30 added a positive reason to have this feature,
i.e. to allow obtaining the old behavior of selective pg_restore should
anyone desire that.
Recent commits have removed the cases where pg_dump emitted comments on
built-in objects that the restoring user might not have privileges to
comment on, so the original primary motivation for this feature is gone,
but it still seems at least somewhat useful in its own right.
Tom Lane [Thu, 25 Jan 2018 19:26:07 +0000 (14:26 -0500)]
Clean up some aspects of pg_dump/pg_restore item-selection logic.
Ensure that CREATE DATABASE and related commands are issued when, and
only when, --create is specified. Previously there were scenarios
where using selective-dump switches would prevent --create from having
any effect. For example, it would fail to do anything in pg_restore
if the archive file had been made by a selective dump, because there
would be no TOC entry for the database.
Since we don't issue \connect either if we don't issue CREATE DATABASE,
this could result in unexpectedly restoring objects into the wrong
database.
Also fix pg_restore's selective restore logic so that when an object is
selected to be restored, we also restore its ACL, comment, and security
label if any. Previously there was no way to get the latter properties
except through tedious mucking about with a -L file. If, for some
reason, you don't want these properties, you can match the old behavior
by adding --no-acl etc.
While at it, try to make _tocEntryRequired() a little better organized
and better documented.
Alvaro Herrera [Thu, 25 Jan 2018 19:11:51 +0000 (16:11 -0300)]
Ignore partitioned indexes where appropriate
get_relation_info() was too optimistic about opening indexes in
partitioned tables, which would raise errors when any queries were
planned on such tables. Fix by ignoring any indexes of the partitioned
kind.
CLUSTER (and ALTER TABLE CLUSTER ON) had a similar problem. Fix by
disallowing these commands in partitioned tables.
Tom Lane [Thu, 25 Jan 2018 18:54:42 +0000 (13:54 -0500)]
Improve pg_dump's handling of "special" built-in objects.
We had some pretty ad-hoc handling of the public schema and the plpgsql
extension, which are both presumed to exist in template0 but might be
modified or deleted in the database being dumped.
Up to now, by default pg_dump would emit a CREATE EXTENSION IF NOT EXISTS
command as well as a COMMENT command for plpgsql. The usefulness of the
former is questionable, and the latter caused annoying errors in
non-superuser dump/restore scenarios. Let's instead install a rule that
built-in extensions (identified by having low-numbered OIDs) are not to be
dumped. We were doing it that way already in binary-upgrade mode, so this
just makes regular mode behave the same. It remains true that if someone
has installed a non-default ACL on the plpgsql language, that will get
dumped thanks to the pg_init_privs mechanism. This is more consistent with
the handling of built-in objects of other kinds.
Also, change the very ad-hoc mechanism that was used to avoid dumping
creation and comment commands for the public schema. Instead of hardwiring
a test in _printTocEntry(), make use of the DUMP_COMPONENT_ infrastructure
to mark that schema up-front about what we want to do with it. This has
the visible effect that the public schema won't be mentioned in the output
at all, except for updating its ACL if it has a non-default ACL.
Previously, while it was normally not mentioned, --clean mode would drop
and recreate it, again causing headaches for non-superuser usage. This
change likewise makes the public schema less special and more like other
built-in objects.
If plpgsql, or the public schema, has been removed entirely in the source
DB, that situation won't be reproduced in the destination ... but that
was true before.
Peter Eisentraut [Thu, 25 Jan 2018 16:14:24 +0000 (11:14 -0500)]
Update documentation to mention huge pages on other OSes
Previously, the docs implied that only Linux and Windows could use huge
pages. That's not quite true: it's just that we only know how to
request them explicitly on those OSes. Be more explicit about what
huge_pages really does and mention that some OSes may use huge pages
automatically.
Author: Thomas Munro and Catalin Iacob Reviewed-By: Justin Pryzby, Peter Eisentraut
Discussion: https://postgr.es/m/CAEepm=3qzR-hfjepymohuC4XO5phxoSoipOjm6BEhnJHjNR+jg@mail.gmail.com
Peter Eisentraut [Tue, 23 Jan 2018 15:55:40 +0000 (10:55 -0500)]
Remove use of byte-masking macros in record_image_cmp
These were introduced in 4cbb646334b3b998a29abef0d57608d42097e6c9, but
after further analysis and testing, they should not be necessary and
probably weren't the part of that commit that fixed anything.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Peter Eisentraut [Thu, 25 Jan 2018 14:14:24 +0000 (09:14 -0500)]
Allow spaces in connection strings in SSL tests
Connection strings can have items with spaces in them, wrapped in
quotes. The tests however ran a SELECT '$connstr' upon connection which
broke on the embedded quotes. Use dollar quotes on the connstr to
protect against this. This was hit during the development of the macOS
Secure Transport patch, but is independent of it.
Tom Lane [Wed, 24 Jan 2018 04:07:13 +0000 (23:07 -0500)]
Improve implementation of pg_attribute_always_inline.
Avoid compiler warnings on MSVC (which doesn't want to see both
__forceinline and inline) and ancient GCC (which doesn't have
__attribute__((always_inline))).
Don't force inline-ing when building at -O0, as the programmer is probably
hoping for exact source-to-object-line correspondence in that case.
(For the moment this only works for GCC; maybe we can extend it later.)
Make pg_attribute_always_inline be syntactically a drop-in replacement
for inline, rather than an additional wart.
And improve the comments.
Thomas Munro and Michail Nikolaev, small tweaks by me
Tom Lane [Tue, 23 Jan 2018 21:50:34 +0000 (16:50 -0500)]
Teach reparameterize_path() to handle AppendPaths.
If we're inside a lateral subquery, there may be no unparameterized paths
for a particular child relation of an appendrel, in which case we *must*
be able to create similarly-parameterized paths for each other child
relation, else the planner will fail with "could not devise a query plan
for the given query". This means that there are situations where we'd
better be able to reparameterize at least one path for each child.
This calls into question the assumption in reparameterize_path() that
it can just punt if it feels like it. However, the only case that is
known broken right now is where the child is itself an appendrel so that
all its paths are AppendPaths. (I think possibly I disregarded that in
the original coding on the theory that nested appendrels would get folded
together --- but that only happens *after* reparameterize_path(), so it's
not excused from handling a child AppendPath.) Given that this code's been
like this since 9.3 when LATERAL was introduced, it seems likely we'd have
heard of other cases by now if there were a larger problem.
Per report from Elvis Pranskevichus. Back-patch to 9.3.
Robert Haas [Tue, 23 Jan 2018 16:20:18 +0000 (11:20 -0500)]
Update obsolete sentence in README.parallel.
Since 9.6, heavyweight locking is not an abstract and unhandled
concern of the parallel machinery, but rather something to which
we have a specific approach.
Robert Haas [Tue, 23 Jan 2018 16:03:03 +0000 (11:03 -0500)]
Report an ERROR if a parallel worker fails to start properly.
Commit 28724fd90d2f85a0573a8107b48abad062a86d83 fixed things so that
if a background worker fails to start due to fork() failure or because
it is terminated before startup succeeds, BGWH_STOPPED will be
reported. However, that only helps if the code that uses the
background worker machinery notices the change in status, and the code
in parallel.c did not.
To fix that, do two things. First, make sure that when a worker
exits, it triggers the leader to read from error queues. That way, if
a worker which has attached to an error queue exits uncleanly, the
leader is sure to throw some error, either the contents of the
ErrorResponse sent by the worker, or "lost connection to parallel
worker" if it exited without sending one. To cover the case where
the worker never starts up in the first place or exits before
attaching to the error queue, the ParallelContext now keeps track
of which workers have sent at least one message via the error
queue. A worker which sends no messages by the time the parallel
operation finishes will be checked to see whether it exited before
attaching to the error queue; if so, a new error message, "parallel
worker failed to initialize", will be reported. If not, we'll
continue to wait until it either starts up and exits cleanly, starts
up and exits uncleanly, or fails to start, and then take the
appropriate action.
Tom Lane [Tue, 23 Jan 2018 15:55:08 +0000 (10:55 -0500)]
In pg_dump, force reconnection after issuing ALTER DATABASE SET command(s).
The folly of not doing this was exposed by the buildfarm: in some cases,
the GUC settings applied through ALTER DATABASE SET may be essential to
interpreting the reloaded data correctly. Another argument why we can't
really get away with the scheme proposed in commit b3f840120 is that it
cannot work for parallel restore: even if the parent process manages to
hang onto the previous GUC state, worker processes would see the state
post-ALTER-DATABASE. (Perhaps we could have dodged that bullet by
delaying DATABASE PROPERTIES restoration to the end of the run, but
that does nothing for the data semantics problem.)
This leaves us with no solution for the default_transaction_read_only issue
that commit 4bd371f6f intended to work around, other than "you gotta remove
such settings before dumping/upgrading". However, in view of the fact that
parallel restore broke that hack years ago and no one has noticed, it's
fair to question how many people care. I'm unexcited about adding a large
dollop of new complexity to handle that corner case.
This would be a one-liner fix, except it turns out that ReconnectToServer
tries to optimize away "redundant" reconnections. While that may have been
valuable when coded, a quick survey of current callers shows that there are
no cases where that's actually useful, so just remove that check. While at
it, remove the function's useless return value.
Peter Eisentraut [Fri, 19 Jan 2018 15:17:56 +0000 (10:17 -0500)]
Extract common bits from OpenSSL implementation
Some things in be-secure-openssl.c and fe-secure-openssl.c were not
actually specific to OpenSSL but could also be used by other
implementations. In order to avoid copy-and-pasting, move some of that
code to common files.
Peter Eisentraut [Fri, 19 Jan 2018 00:53:22 +0000 (19:53 -0500)]
Move SSL API comments to header files
Move the documentation of the SSL API calls are supposed to do into the
headers files, instead of keeping them in the files for the OpenSSL
implementation. That way, they don't have to be duplicated or be
inconsistent when other implementations are added.
Peter Eisentraut [Fri, 19 Jan 2018 00:12:05 +0000 (19:12 -0500)]
Split out documentation of SSL parameters into their own section
Split the "Authentication and Security" section into two separate
sections "Authentication" and "SSL". The latter part has gotten much
longer over time, and doesn't primarily have to do with authentication.
Also, the row_security parameter was inconsistently categorized, so
clean that up while we're here.
Tom Lane [Mon, 22 Jan 2018 19:09:09 +0000 (14:09 -0500)]
Move handling of database properties from pg_dumpall into pg_dump.
This patch rearranges the division of labor between pg_dump and pg_dumpall
so that pg_dump itself handles all properties attached to a single
database. Notably, a database's ACL (GRANT/REVOKE status) and local GUC
settings established by ALTER DATABASE SET and ALTER ROLE IN DATABASE SET
can be dumped and restored by pg_dump. This is a long-requested
improvement.
"pg_dumpall -g" will now produce only role- and tablespace-related output,
nothing about individual databases. The total output of a regular
pg_dumpall run remains the same.
pg_dump (or pg_restore) will restore database-level properties only when
creating the target database with --create. This applies not only to
ACLs and GUCs but to the other database properties it already handled,
that is database comments and security labels. This is more consistent
and useful, but does represent an incompatibility in the behavior seen
without --create.
(This change makes the proposed patch to have pg_dump use "COMMENT ON
DATABASE CURRENT_DATABASE" unnecessary, since there is no case where
the command is issued that we won't know the true name of the database.
We might still want that patch as a feature in its own right, but pg_dump
no longer needs it.)
pg_dumpall with --clean will now drop and recreate the "postgres" and
"template1" databases in the target cluster, allowing their locale and
encoding settings to be changed if necessary, and providing a cleaner
way to set nondefault tablespaces for them than we had before. This
means that such a script must now always be started in the "postgres"
database; the order of drops and reconnects will not work otherwise.
Without --clean, the script will not adjust any database-level properties
of those two databases (including their comments, ACLs, and security
labels, which it formerly would try to set).
Another minor incompatibility is that the CREATE DATABASE commands in a
pg_dumpall script will now always specify locale and encoding settings.
Formerly those would be omitted if they matched the cluster's default.
While that behavior had some usefulness in some migration scenarios,
it also posed a significant hazard of unwanted locale/encoding changes.
To migrate to another locale/encoding, it's now necessary to use pg_dump
without --create to restore into a database with the desired settings.
Commit 4bd371f6f's hack to emit "SET default_transaction_read_only = off"
is gone: we now dodge that problem by the expedient of not issuing ALTER
DATABASE SET commands until after reconnecting to the target database.
Therefore, such settings won't apply during the restore session.
In passing, improve some shaky grammar in the docs, and add a note pointing
out that pg_dumpall's output can't be expected to load without any errors.
(Someday we might want to fix that, but this is not that patch.)
Haribabu Kommi, reviewed at various times by Andreas Karlsson,
Vaishnavi Prabakaran, and Robert Haas; further hacking by me.
Tom Lane [Mon, 22 Jan 2018 17:37:11 +0000 (12:37 -0500)]
Reorder code in pg_dump to dump comments etc in a uniform order.
Most of the code in pg_dump dumps an object's comment, security label,
and ACL auxiliary TOC entries, in that order, immediately after the
object's main TOC entry, and at least dumpComment's API spec says this
isn't optional. dumpDatabase was significantly violating that when
in binary-upgrade mode, by inserting totally unrelated stuff between.
Also, dumpForeignDataWrapper and dumpForeignServer were being randomly
inconsistent. Reorder code so everybody does it the same.
This may be future-proofing us against some code growing a requirement for
such auxiliary entries to be adjacent to their main entry. But for now
it's just neatnik-ism, so I see no need for back-patch.
Peter Eisentraut [Mon, 22 Jan 2018 17:09:52 +0000 (12:09 -0500)]
PL/Python: Fix tests for older Python versions
Commit 8561e4840c81f7e345be2df170839846814fa004 neglected to handle
older Python versions that don't support the "with" statement. So write
the tests in a way that older versions can handle as well.
Tom Lane [Mon, 22 Jan 2018 17:06:18 +0000 (12:06 -0500)]
Make pg_dump's ACL, sec label, and comment entries reliably identifiable.
_tocEntryRequired() expects that it can identify ACL, SECURITY LABEL,
and COMMENT TOC entries that are for large objects by seeing whether
the tag for them starts with "LARGE OBJECT ". While that works fine
for actual large objects, which are indeed tagged that way, it's
subject to false positives unless every such entry's tag starts with an
appropriate type ID. And in fact it does not work for ACLs, because
up to now we customarily tagged those entries with just the bare name
of the object. This means that an ACL for an object named
"LARGE OBJECT something" would be misclassified as data not schema,
with undesirable results in a schema-only or data-only dump ---
although pg_upgrade seems unaffected, due to the special case for
binary-upgrade mode further down in _tocEntryRequired().
We can fix this by changing all the dumpACL calls to use the label
strings already in use for comments and security labels, which do
follow the convention of starting with an object type indicator.
Well, mostly they follow it. dumpDatabase() got it wrong, using
just the bare database name for those purposes, so that a database
named "LARGE OBJECT something" would similarly be subject to having
its comment or security label dropped or included when not wanted.
Bring that into line too. (Note that up to now, database ACLs have
not been processed by pg_dump, so that this issue doesn't affect them.)
_tocEntryRequired() itself is not free of fault: it was overly liberal
about matching object tags to "LARGE OBJECT " in binary-upgrade mode.
This looks like it is probably harmless because there would be no data
component to strip anyway in that mode, but at best it's trouble
waiting to happen, so tighten that up too.
The possible misclassification of SECURITY LABEL entries for databases is
in principle a security problem, but the opportunities for actual exploits
seem too narrow to be interesting. The other cases seem like just bugs,
since an object owner can change its ACL or comment for himself, he needn't
try to trick someone else into doing it by choosing a strange name.
This has been broken since per-large-object TOC entries were introduced
in 9.0, so back-patch to all supported branches.
Peter Eisentraut [Mon, 22 Jan 2018 13:30:16 +0000 (08:30 -0500)]
Transaction control in PL procedures
In each of the supplied procedural languages (PL/pgSQL, PL/Perl,
PL/Python, PL/Tcl), add language-specific commit and rollback
functions/commands to control transactions in procedures in that
language. Add similar underlying functions to SPI. Some additional
cleanup so that transaction commit or abort doesn't blow away data
structures still used by the procedure call. Add execution context
tracking to CALL and DO statements so that transaction control commands
can only be issued in top-level procedure and block calls, not function
calls or other procedure or block calls.
- SPI
Add a new function SPI_connect_ext() that is like SPI_connect() but
allows passing option flags. The only option flag right now is
SPI_OPT_NONATOMIC. A nonatomic SPI connection can execute transaction
control commands, otherwise it's not allowed. This is meant to be
passed down from CALL and DO statements which themselves know in which
context they are called. A nonatomic SPI connection uses different
memory management. A normal SPI connection allocates its memory in
TopTransactionContext. For nonatomic connections we use PortalContext
instead. As the comment in SPI_connect_ext() (previously SPI_connect())
indicates, one could potentially use PortalContext in all cases, but it
seems safest to leave the existing uses alone, because this stuff is
complicated enough already.
SPI also gets new functions SPI_start_transaction(), SPI_commit(), and
SPI_rollback(), which can be used by PLs to implement their transaction
control logic.
- portalmem.c
Some adjustments were made in the code that cleans up portals at
transaction abort. The portal code could already handle a command
*committing* a transaction and continuing (e.g., VACUUM), but it was not
quite prepared for a command *aborting* a transaction and continuing.
In AtAbort_Portals(), remove the code that marks an active portal as
failed. As the comment there already predicted, this doesn't work if
the running command wants to keep running after transaction abort. And
it's actually not necessary, because pquery.c is careful to run all
portal code in a PG_TRY block and explicitly runs MarkPortalFailed() if
there is an exception. So the code in AtAbort_Portals() is never used
anyway.
In AtAbort_Portals() and AtCleanup_Portals(), we need to be careful not
to clean up active portals too much. This mirrors similar code in
PreCommit_Portals().
- PL/Perl
Gets new functions spi_commit() and spi_rollback()
- PL/pgSQL
Gets new commands COMMIT and ROLLBACK.
Update the PL/SQL porting example in the documentation to reflect that
transactions are now possible in procedures.
- PL/Python
Gets new functions plpy.commit and plpy.rollback.
- PL/Tcl
Gets new commands commit and rollback.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
projects / postgresql / log