Michael Haggerty [Thu, 14 Jan 2010 05:54:50 +0000 (06:54 +0100)]
rebase -i: Simplify commit counting for generated commit messages
Read the old count from the first line of the old commit message
rather than counting the number of commit message blocks in the file.
This is simpler, faster, and more robust (e.g., it cannot be confused
by strange commit message contents).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Thu, 14 Jan 2010 05:54:49 +0000 (06:54 +0100)]
rebase -i: Improve consistency of commit count in generated commit messages
Use the numeral "2" instead of the word "two" when two commits are
being interactively squashed. This makes the treatment consistent
with that for higher numbers of commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Thu, 14 Jan 2010 05:54:48 +0000 (06:54 +0100)]
t3404: Test the commit count in commit messages generated by "rebase -i"
The first line of commit messages generated for "rebase -i"
squash/fixup commits includes a count of the number of commits that
are being combined. Add machinery to check that this count is
correct, and add such a check to some test cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Thu, 14 Jan 2010 05:54:41 +0000 (06:54 +0100)]
rebase -i: Remove dead code
This branch of the "if" is only executed if $no_ff is empty, which
only happens if $1 was not '-n'. (This code has been dead since 1d25c8cf82eead72e11287d574ef72d3ebec0db1.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Tue, 12 Jan 2010 15:38:36 +0000 (16:38 +0100)]
rebase-i: Ignore comments and blank lines in peek_next_command
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command is like "squash", except that it discards the commit message
of the corresponding commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 3 Dec 2009 21:52:54 +0000 (13:52 -0800)]
Merge branch 'mm/maint-hint-failed-merge' into maint
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
Junio C Hamano [Thu, 3 Dec 2009 21:51:36 +0000 (13:51 -0800)]
Merge branch 'mm/config-pathname-tilde-expand' into maint
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
Junio C Hamano [Thu, 3 Dec 2009 21:51:21 +0000 (13:51 -0800)]
Merge branch 'jk/maint-break-rename-reduce-memory' into maint
* jk/maint-break-rename-reduce-memory:
diffcore-rename: reduce memory footprint by freeing blob data early
diffcore-break: save cnt_data for other phases
diffcore-break: free filespec data as we go
Junio C Hamano [Thu, 3 Dec 2009 19:12:32 +0000 (11:12 -0800)]
Documentation: xmlto 0.0.18 does not know --stringparam
Newer DocBook stylesheets want man.base.url.for.relative.links
parameter set when formatting manpages with external references
to turn them into full URLs, and leave a helpful "you should
set this parameter" message in the output. Earlier we added
the MAN_BASE_URL make variable to specify the value for it.
When MAN_BASE_URL is not given, it ought to be safe to set the
parameter to empty; it would result in an empty leading path for
older stylesheets that ignore the parameter, and newer ones
would produce the same "relative URL" without the message.
Unfortunately, older xmlto (at least version 0.0.18 released in
early 2004 that comes with RHEL/CentOS 5) does not understand
the --stringparam command line option, so we cannot add the
parameter definition unconditionally to the command line. Work
it around by passing the parameter only when set.
If you do not have a suitable URL prefix, you can pass a quoted empty
string to it, like so:
Johan Herland [Thu, 3 Dec 2009 03:53:54 +0000 (04:53 +0100)]
Fix crasher on encountering SHA1-like non-note in notes tree
When loading a notes tree, the code primarily looks for SHA1-like paths
whose total length (discounting directory separators) are 40 chars
(interpreted as valid note entries) or less (interpreted as subtree
entries that may in turn contain note entries when unpacked).
However, there is an additional condition that must hold for valid
subtree entries: They must be _tree_ objects (duh).
This patch adds an appropriate test for this condition, thereby fixing
the crash that occured when passing a non-tree object to the tree-walk
API.
The patch also adds another selftest verifying correct behaviour of
non-notes in note trees.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 3 Dec 2009 17:52:46 +0000 (11:52 -0600)]
t9001: use older Getopt::Long boolean prefix '--no' rather than '--no-'
The '--no-chain-reply-to' option is a Getopt::Long boolean option. The
'--no-' prefix (as in --no-chain-reply-to) for boolean options is not
supported in Getopt::Long version 2.32 which was released with Perl 5.8.0.
This version only supports '--no' as in '--nochain-reply-to'. More recent
versions of Getopt::Long, such as version 2.34, support either prefix. So
use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 3 Dec 2009 17:52:45 +0000 (11:52 -0600)]
t4201: use ISO8859-1 rather than ISO-8859-1
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 and IRIX 6.5 do not know that
ISO-8859-1 is the same as ISO8859-1. Modern platforms do know this, so use
the older name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 2 Dec 2009 18:30:12 +0000 (10:30 -0800)]
Merge branch 'maint'
* maint:
Prepare for 1.6.5.4
merge: do not add standard message when message is given with -m option
Do not misidentify "git merge foo HEAD" as an old-style invocation
Junio C Hamano [Wed, 2 Dec 2009 18:00:58 +0000 (10:00 -0800)]
merge: do not add standard message when message is given with -m option
Even if the user explicitly gave her own message to "git merge", the
command still added its standard merge message. It resulted in a
useless repetition like this:
% git merge -m "Merge early part of side branch" `git rev-parse side~2`
% git show -s
commit 37217141e7519629353738d5e4e677a15096206f
Merge: e68e646a1d2374
Author: しらいし ななこ <nanako3@lavabit.com>
Date: Wed Dec 2 14:33:20 2009 +0900
The gave her own message because she didn't want git to add the
standard message (if she wanted to, she wouldn't have given one,
or she would have prepared it using git-fmt-merge-msg command).
Junio C Hamano [Wed, 2 Dec 2009 17:59:35 +0000 (09:59 -0800)]
Do not misidentify "git merge foo HEAD" as an old-style invocation
This was misinterpreted as an ancient style "git merge <message> HEAD
<commit> <commit>..." that merges one (or more) <commit> into the current
branch and record the resulting commit with the given message. Then a
later sanity check found that there is no <commit> specified and gave
a usage message.
Tested-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 1 Dec 2009 20:47:04 +0000 (12:47 -0800)]
Merge branch 'maint'
* maint:
help: Do not unnecessarily look for a repository
Documentation: Fix a few i.e./e.g. mix-ups
Documentation: Document --branch option in git clone synopsis
Junio C Hamano [Tue, 1 Dec 2009 00:23:50 +0000 (16:23 -0800)]
git-merge: a deprecation notice of the ancient command line syntax
The ancient form of git merge command used in the original sample script
has been copied from Linus and are still found everywhere, I think, and
people may still have it in their scripts, but on the other hand, it is so
unintuitive that even people reasonably familiar with git are surprised by
accidentally triggering the support to parse this ancient form.
Gently nudge people to upgrade their script to more recent and readable
style for eventual removal of the original syntax.
Bert Wesarg [Mon, 30 Nov 2009 23:57:27 +0000 (00:57 +0100)]
get_ref_states: strdup entries and free util in stale list
The entries in states->stale list is filled in handle_one_branch() that is
a call-back funcation to for_each_ref() using the callback parameter given
to it. We need to strdup() the refnames (both the string list key and the
value stored in util) for more permanent storage and free them when we are
done.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Tue, 1 Dec 2009 19:27:34 +0000 (11:27 -0800)]
help: Do not unnecessarily look for a repository
Although 'git help' actually doesn't need to be run inside a git
repository and uses no repository-specific information, it looks for a git
directory. Searching for a git directory can be annoying in auto-mount
environments. With this commit, 'git help' no longer searches for a
repository when run without any options.
7c3baa9 originally modified 'git help -a' to not require a repository.
This applies the same fix for 'git help'.
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 1 Dec 2009 19:28:15 +0000 (11:28 -0800)]
Merge branch 'jn/gitweb-blame'
* jn/gitweb-blame:
gitweb: Add link to other blame implementation in blame views
gitweb: Make linking to actions requiring JavaScript a feature
gitweb.js: fix padLeftStr() and its usage
gitweb.js: Harden setting blamed commit info in incremental blame
gitweb.js: fix null object exception in initials calculation
gitweb: Minify gitweb.js if JSMIN is defined
gitweb: Create links leading to 'blame_incremental' using JavaScript
gitweb: Colorize 'blame_incremental' view during processing
gitweb: Incremental blame (using JavaScript)
gitweb: Add optional "time to generate page" info in footer
Jakub Narebski [Thu, 26 Nov 2009 20:12:15 +0000 (21:12 +0100)]
gitweb: Make linking to actions requiring JavaScript a feature
Let gitweb turn some links (like 'blame' links) into linking to actions
which require JavaScript (like 'blame_incremental' action) only if
'javascript-actions' feature is enabled.
This means that links to such actions would be present only if both
JavaScript is enabled and 'javascript-actions' feature is enabled.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Sun, 29 Nov 2009 12:18:33 +0000 (13:18 +0100)]
builtin-merge: show user-friendly error messages for fast-forward too.
fadd069d03 (merge-recursive: give less scary messages when merge did not
start, Sep 7 2009) introduced some friendlier error message for merge
failure, but the messages were shown only for non-fast forward merges.
This patch uses the same for fast-forward.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Sun, 29 Nov 2009 12:18:32 +0000 (13:18 +0100)]
merge-recursive: make the error-message generation an extern function
The construction of the struct unpack_trees_error_msgs was done within
git_merge_trees(), which prevented using the same messages easily from
another function.
[jc: backported for 1.6.5 maint before advice_commit_before_merge]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avery Pennarun [Thu, 26 Nov 2009 02:23:54 +0000 (21:23 -0500)]
builtin-merge.c: call exclude_cmds() correctly.
We need to call exclude_cmds() after the loop, not during the loop, because
excluding a command from the array can change the indexes of objects in the
array. The result is that, depending on file ordering, some commands
weren't excluded as they should have been.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nanako Shiraishi [Sun, 29 Nov 2009 03:24:48 +0000 (12:24 +0900)]
prepare send-email for smoother change of --chain-reply-to default
Give a warning message when send-email uses chain-reply-to to thread the
messages because of the current default, not because the user explicitly
asked to, either from the command line or from the configuration.
This way, by the time 1.7.0 switches the default, everybody will be ready.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sat, 28 Nov 2009 11:41:28 +0000 (05:41 -0600)]
Makefile: do not clean arm directory
The ARM SHA-1 implementation was removed by commit 30ae47b
(remove ARM and Mozilla SHA1 implementations, 2009-08-17). Prune
its directory from the list of object files to delete in 'make
clean'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Thu, 26 Nov 2009 19:04:29 +0000 (21:04 +0200)]
send-email: automatic envelope sender
This adds the option to specify the envelope sender as "auto" which
would pick the 'from' address. This is good because now we can specify
the address only in one place in $HOME/.gitconfig and change it easily.
[jc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 28 Nov 2009 06:04:10 +0000 (22:04 -0800)]
emit_line(): don't emit an empty <SET><RESET> followed by a newline
When emit_line() is called with an empty line (but non-zero length, as we
send line terminating LF or CRLF to the function), it used to emit
<SET><RESET> followed by a newline. Stop the wastefulness.
Junio C Hamano [Fri, 27 Nov 2009 23:06:37 +0000 (15:06 -0800)]
Remove dead code from "git am"
Ever since the initial implementation, "git am" had kept a dead code that
never triggered due to a typo in the variable name. Worse yet, the code,
if it weren't for the typo, would have attempted to add "[PATCH] " at the
beginning of the Subject: header when "git am" is run with its "-k"
option. However, because "git am -k" tells mailinfo to keep such prefix
when parsing the input, the "[PATCH] " added by this dead code would have
really been unnecessary duplicate.
Embarrassing is that we kept _maintaining_ the codepath without anybody
noticing for four years.
Johannes Sixt [Fri, 27 Nov 2009 07:42:25 +0000 (08:42 +0100)]
Add a notice that only certain functions can print color escape codes
We emulate color escape codes on Windows by overriding printf, fprintf,
and fputs. Warn developers that these are the only functions that can be
used to print them.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Thu, 26 Nov 2009 19:11:59 +0000 (21:11 +0200)]
format-patch: fix parsing of "--" on the command line
When given a pathspec that does not match any path in the current work
tree with an explicit "--":
git format-patch <commit> -- <path>
the command still complains that <path> does not exist in the current work
tree and the user needs to explicitly specify "--" and errors out. This
is because it incorrectly removes "--" from the command line arguments
that is later passed to setup_revisions().
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 25 Nov 2009 10:56:54 +0000 (02:56 -0800)]
builtin-apply.c: pay attention to -p<n> when determining the name
The patch structure has def_name component that is used to validate the
sanity of a "diff --git" patch by checking pathnames that appear on the
patch header lines for consistency. The git_header_name() function is
used to compute this out of "diff --git a/... b/..." line, but the code
always stripped one level of prefix (i.e. "a/" and "b/"), without paying
attention to -p<n> option. Code in find_name() function that parses other
lines in the patch header (e.g. "--- a/..." and "+++ b/..." lines) however
did strip the correct number of leading paths prefixes, and the sanity
check between these computed values failed.
Teach git_header_name() to honor -p<n> option like find_name() function
does.
Found and reported by Steven J. Murdoch who also wrote tests.
projects / git / log