As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
Tom Lane [Sun, 4 Aug 2019 18:05:34 +0000 (14:05 -0400)]
Fix handling of "undef" in contrib/jsonb_plperl.
Perl has multiple internal representations of "undef", and just
testing for SvTYPE(x) == SVt_NULL doesn't recognize all of them,
leading to "cannot transform this Perl type to jsonb" errors.
Use the approved test SvOK() instead.
Report and patch by Ivan Panchenko. Back-patch to v11 where
this module was added.
Tom Lane [Sun, 4 Aug 2019 17:07:12 +0000 (13:07 -0400)]
Avoid picking already-bound TCP ports in kerberos and ldap test suites.
src/test/kerberos and src/test/ldap need to run a private authentication
server of the relevant type, for which they need a free TCP port.
They were just picking a random port number in 48K-64K, which works
except when something's already using the particular port. Notably,
the probability of failure rises dramatically if one simply runs those
tests in a tight loop, because each test cycle leaves behind a bunch of
high ports that are transiently in TIME_WAIT state.
To fix, split out the code that PostgresNode.pm already had for
identifying a free TCP port number, so that it can be invoked to choose
a port for the KDC or LDAP server. This isn't 100% bulletproof, since
conceivably something else on the machine could grab the port between
the time we check and the time we actually start the server. But that's
a pretty short window, so in practice this should be good enough.
Back-patch to v11 where these test suites were added.
Alvaro Herrera [Sun, 4 Aug 2019 15:18:45 +0000 (11:18 -0400)]
Improve pruning of a default partition
When querying a partitioned table containing a default partition, we
were wrongly deciding to include it in the scan too early in the
process, failing to exclude it in some cases. If we reinterpret the
PruneStepResult.scan_default flag slightly, we can do a better job at
detecting that it can be excluded. The change is that we avoid setting
the flag for that pruning step unless the step absolutely requires the
default partition to be scanned (in contrast with the previous
arrangement, which was to set it unless the step was able to prune it).
So get_matching_partitions() must explicitly check the partition that
each returned bound value corresponds to in order to determine whether
the default one needs to be included, rather than relying on the flag
from the final step result.
Author: Yuzuko Hosoya <hosoya.yuzuko@lab.ntt.co.jp> Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Discussion: https://postgr.es/m/00e601d4ca86$932b8bc0$b982a340$@lab.ntt.co.jp
Michael Paquier [Sun, 4 Aug 2019 02:18:57 +0000 (11:18 +0900)]
Refactor BuildIndexInfo() with the new makeIndexInfo()
This portion of the code got forgotten in 7cce159 which has introduced a
new routine to build this node, and this finishes the unification of the
places where IndexInfo is initialized.
Author: Michael Paquier
Discussion: https://postgr.es/m/20190801041322.GA3435@paquier.xyz
Andres Freund [Fri, 2 Aug 2019 07:02:46 +0000 (00:02 -0700)]
Fix representation of hash keys in Hash/HashJoin nodes.
In 5f32b29c1819 I changed the creation of HashState.hashkeys to
actually use HashState as the parent (instead of HashJoinState, which
was incorrect, as they were executed below HashState), to fix the
problem of hashkeys expressions otherwise relying on slot types
appropriate for HashJoinState, rather than HashState as would be
correct. That reliance was only introduced in 12, which is why it
previously worked to use HashJoinState as the parent (although I'd be
unsurprised if there were problematic cases).
Unfortunately that's not a sufficient solution, because before this
commit, the to-be-hashed expressions referenced inner/outer as
appropriate for the HashJoin, not Hash. That didn't have obvious bad
consequences, because the slots containing the tuples were put into
ecxt_innertuple when hashing a tuple for HashState (even though Hash
doesn't have an inner plan).
There are less common cases where this can cause visible problems
however (rather than just confusion when inspecting such executor
trees). E.g. "ERROR: bogus varno: 65000", when explaining queries
containing a HashJoin where the subsidiary Hash node's hash keys
reference a subplan. While normally hashkeys aren't displayed by
EXPLAIN, if one of those expressions references a subplan, that
subplan may be printed as part of the Hash node - which then failed
because an inner plan was referenced, and Hash doesn't have that.
It seems quite possible that there's other broken cases, too.
Fix the problem by properly splitting the expression for the HashJoin
and Hash nodes at plan time, and have them reference the proper
subsidiary node. While other workarounds are possible, fixing this
correctly seems easy enough. It was a pretty ugly hack to have
ExecInitHashJoin put the expression into the already initialized
HashState, in the first place.
I decided to not just split inner/outer hashkeys inside
make_hashjoin(), but also to separate out hashoperators and
hashcollations at plan time. Otherwise we would have ended up having
two very similar loops, one at plan time and the other during executor
startup. The work seems to more appropriately belong to plan time,
anyway.
Reported-By: Nikita Glukhov, Alexander Korotkov
Author: Andres Freund Reviewed-By: Tom Lane, in an earlier version
Discussion: https://postgr.es/m/CAPpHfdvGVegF_TKKRiBrSmatJL2dR9uwFCuR+teQ_8tEXU8mxg@mail.gmail.com
Backpatch: 12-
Michael Paquier [Fri, 2 Aug 2019 00:51:12 +0000 (09:51 +0900)]
Fix format truncation issue from ECPG test
This fixes one warning generated by GCC and present in the test case
array part of ECPG. This likely got missed in past fixes like 3a4b891
because the compilation of those tests is not done by default.
Jeff Davis [Thu, 1 Aug 2019 21:52:43 +0000 (14:52 -0700)]
Allow simplehash to use already-calculated hash values.
Add _lookup_hash and _insert_hash functions for callers that have
already calculated the hash value of the key.
The immediate use case is for hash algorithms that write to disk in
partitions. The hash value can be calculated once, used to perform a
lookup, used to select the partition, then written to the partition
along with the tuple. When the tuple is read back, the hash value does
not need to be recalculated.
Tom Lane [Thu, 1 Aug 2019 22:50:22 +0000 (18:50 -0400)]
Allow functions-in-FROM to be pulled up if they reduce to constants.
This allows simplification of the plan tree in some common usage
patterns: we can get rid of a join to the function RTE.
In principle we could pull up any immutable expression, but restricting
it to Consts avoids the risk that multiple evaluations of the expression
might cost more than we can save. (Possibly this could be improved in
future --- but we've more or less promised people that putting a function
in FROM guarantees single evaluation, so we'd have to tread carefully.)
To do this, we need to rearrange when eval_const_expressions()
happens for expressions in function RTEs. I moved it to
inline_set_returning_functions(), which already has to iterate over
every function RTE, and in consequence renamed that function to
preprocess_function_rtes(). A useful consequence is that
inline_set_returning_function() no longer has to do this for itself,
simplifying that code.
In passing, break out pull_up_simple_subquery's code that knows where
everything that needs pullup_replace_vars() processing is, so that
the new pull_up_constant_function() routine can share it. We'd
gotten away with one-and-a-half copies of that code so far, since
pull_up_simple_values() could assume that a lot of cases didn't apply
to it --- but I don't think pull_up_constant_function() can make any
simplifying assumptions. Might as well make pull_up_simple_values()
use it too.
(Possibly this refactoring should go further: maybe we could share
some of the code to fill in the pullup_replace_vars_context struct?
For now, I left it that the callers fill that completely.)
Note: the one existing test case that this patch changes has to be
changed because inlining its function RTEs would destroy the point
of the test, namely to check join order.
Alexander Kuzmenkov and Aleksandr Parfenov, reviewed by
Antonin Houska and Anastasia Lubennikova, and whacked around
some more by me
Peter Geoghegan [Thu, 1 Aug 2019 16:34:14 +0000 (09:34 -0700)]
Add sort support routine for the inet data type.
Add sort support for inet, including support for abbreviated keys.
Testing has shown that this reduces the time taken to sort medium to
large inet/cidr inputs by ~50-60% in realistic cases.
Author: Brandur Leach Reviewed-By: Peter Geoghegan, Edmund Horner
Discussion: https://postgr.es/m/CABR_9B-PQ8o2MZNJ88wo6r-NxW2EFG70M96Wmcgf99G6HUQ3sw@mail.gmail.com
Tom Lane [Thu, 1 Aug 2019 15:50:00 +0000 (11:50 -0400)]
Add an isolation test to exercise parallel-worker deadlock resolution.
Commit a1c1af2a1 added logic in the deadlock checker to handle lock
grouping, but it was very poorly tested, as evidenced by the bug
fixed in 3420851a2. Add a test case that exercises that a bit better
(and catches the bug --- if you revert 3420851a2, this will hang).
Since it's pretty hard to get parallel workers to take exclusive
regular locks that their parents don't already have, this test operates
by creating a deadlock among advisory locks taken in parallel workers.
To make that happen, we must override the parallel-safety labeling of
the advisory-lock functions, which we do by putting them in mislabeled,
non-inlinable wrapper functions.
We also have to remove the redundant PreventAdvisoryLocksInParallelMode
checks in lockfuncs.c. That seems fine though; if some user accidentally
does what this test is intentionally doing, not much harm will ensue.
(If there are any remaining bugs that are reachable that way, they're
probably reachable in other ways too.)
Tom Lane [Thu, 1 Aug 2019 15:36:21 +0000 (11:36 -0400)]
Mark advisory-lock functions as parallel restricted, not parallel unsafe.
There seems no good reason not to allow a parallel leader to execute
these functions. (The workers still can't, though. Although the code
would work, any such lock would go away at worker exit, which is not
the documented behavior of advisory locks.)
Michael Paquier [Thu, 1 Aug 2019 00:37:28 +0000 (09:37 +0900)]
Fix handling of previous password hooks in passwordcheck
When piling up loading of modules using check_password_hook_type,
loading passwordcheck would remove any trace of a previously-loaded
hook. Unloading the module would also cause previous hooks to be
entirely gone.
Reported-by: Rafael Castro
Author: Michael Paquier Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/15932-78f48f9ef166778c@postgresql.org
Backpatch-through: 9.4
Tom Lane [Wed, 31 Jul 2019 19:42:49 +0000 (15:42 -0400)]
Fix pg_dump's handling of dependencies for custom opclasses.
Since pg_dump doesn't treat the member operators and functions of operator
classes/families (that is, the pg_amop and pg_amproc entries, not the
underlying operators/functions) as separate dumpable objects, it missed
their dependency information. I think this was safe when the code was
designed, because the default object sorting rule emits operators and
functions before opclasses, and there were no dependency types that could
mess that up. However, the introduction of range types in 9.2 broke it:
now a type can have a dependency on an opclass, allowing dependency rules
to push the opclass before the type and hence before custom operators.
Lacking any information showing that it shouldn't do so, pg_dump emitted
the objects in the wrong order.
Fix by teaching getDependencies() to translate pg_depend entries for
pg_amop/amproc rows to look like dependencies for their parent opfamily.
I added a regression test for this in HEAD/v12, but not further back;
life is too short to fight with 002_pg_dump.pl.
Per bug #15934 from Tom Gottfried. Back-patch to all supported branches.
Peter Eisentraut [Wed, 31 Jul 2019 07:42:15 +0000 (09:42 +0200)]
Run UTF8-requiring collation tests by default
The tests collate.icu.utf8 and collate.linux.utf8 were previously only
run when explicitly selected via EXTRA_TESTS. They require a UTF8
database, because the error messages in the expected files refer to
that, and they use some non-ASCII characters in the tests. Since
users can select any locale and encoding for the regression test run,
it was not possible to include these tests automatically.
To fix, use psql's \if facility to check various prerequisites such as
platform and the server encoding and quit the tests at the very
beginning if the configuration is not adequate. We then need to
maintain alternative expected files for these tests, but they are very
tiny and never need to change after this.
These two tests are now run automatically as part of the regression
tests.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/052295c2-a2e1-9a21-bd36-8fbff8686cf3%402ndquadrant.com
Andres Freund [Wed, 31 Jul 2019 07:05:21 +0000 (00:05 -0700)]
Remove superfluous newlines in function prototypes.
These were introduced by pgindent due to fixe to broken
indentation (c.f. 8255c7a5eeba8). Previously the mis-indentation of
function prototypes was creatively used to reduce indentation in a few
places.
As that formatting only exists in master and REL_12_STABLE, it seems
better to fix it in both, rather than having some odd indentation in
v12 that somebody might copy for future patches or such.
Author: Andres Freund
Discussion: https://postgr.es/m/20190728013754.jwcbe5nfyt3533vx@alap3.anarazel.de
Backpatch: 12-
The rd_amcache allows an index AM to cache arbitrary information in a
relcache entry. This commit moves the cleanup of rd_amcache so that it
can also be used by table AMs. Nothing takes advantage of that yet, but
I'm sure it'll come handy for anyone writing new table AMs.
Backpatch to v12, where table AM interface was introduced.
Print WAL position correctly in pg_rewind error message.
This has been wrong ever since pg_rewind was added. The if-branch just
above this, where we print the same error with an extra message supplied
by XLogReadRecord() got this right, but the variable name was wrong in the
else-branch. As a consequence, the error printed the WAL position as
0/0 if there was an error reading a WAL file.
Tomas Vondra [Tue, 30 Jul 2019 17:17:12 +0000 (19:17 +0200)]
Don't build extended statistics on inheritance trees
When performing ANALYZE on inheritance trees, we collect two samples for
each relation - one for the relation alone, and one for the inheritance
subtree (relation and its child relations). And then we build statistics
on each sample, so for each relation we get two sets of statistics.
For regular (per-column) statistics this works fine, because the catalog
includes a flag differentiating statistics built from those two samples.
But we don't have such flag in the extended statistics catalogs, and we
ended up updating the same row twice, triggering this error:
ERROR: tuple already updated by self
The simplest solution is to disable extended statistics on inheritance
trees, which is what this commit is doing. In the future we may need to
do something similar to per-column statistics, but that requires adding a
flag to the catalog - and that's not backpatchable. Moreover, the current
selectivity estimation code only works with individual relations, so
building statistics on inheritance trees would be pointless anyway.
Author: Tomas Vondra Backpatch-to: 10-
Discussion: https://postgr.es/m/20190618231233.GA27470@telsasoft.com Reported-by: Justin Pryzby
Michael Paquier [Tue, 30 Jul 2019 01:54:48 +0000 (10:54 +0900)]
Fix memory leak coming from simple lists built in reindexdb
When building a list of relations for a parallel processing of a schema
or a database (or just a single-entry list for the non-parallel case
with the database name), the list is allocated and built on-the-fly for
each database processed, leaking after one database-level reindex is
done. This accumulates leaks when processing all databases, and could
become a visible issue with thousands of relations.
This is fixed by introducing a new routine in simple_list.c to free all
the elements in a simple list made of strings or OIDs. The header of
the list may be using a variable declaration or an allocated pointer,
so we don't have a routine to free this part to keep the interface
simple.
Per report from coverity for an issue introduced by 5ab892c, and
valgrind complains about the leak as well. The idea to introduce a new
routine in simple_list.c is from Tom Lane.
Tom Lane [Mon, 29 Jul 2019 22:49:04 +0000 (18:49 -0400)]
Fix busted logic for parallel lock grouping in TopoSort().
A "break" statement erroneously left behind by commit a1c1af2a1
caused TopoSort to do the wrong thing if a lock's wait list
contained multiple members of the same locking group.
Because parallel workers don't normally need any locks not already
taken by their leader, this is very hard --- maybe impossible ---
to hit in production. Still, if it did happen, the queries involved
in an otherwise-resolvable deadlock would block until canceled.
In addition to removing the bogus "break", add an Assert showing
that the conflicting uses of the beforeConstraints[] array (for both
counts and flags) don't overlap, and add some commentary explaining
why not; because it's not obvious without explanation, IMHO.
Original report and patch from Rui Hai Jiang; additional assert
and commentary by me. Back-patch to 9.6 where the bug came in.
Michael Paquier [Mon, 29 Jul 2019 00:58:49 +0000 (09:58 +0900)]
Fix handling of expressions and predicates in REINDEX CONCURRENTLY
When copying the definition of an index rebuilt concurrently for the new
entry, the index information was taken directly from the old index using
the relation cache. In this case, predicates and expressions have
some post-processing to prepare things for the planner, which loses some
information including the collations added in any of them.
This inconsistency can cause issues when attempting for example a table
rewrite, and makes the new indexes rebuilt concurrently inconsistent
with the old entries.
In order to fix the problem, fetch expressions and predicates directly
from the catalog of the old entry, and fill in IndexInfo for the new
index with that. This makes the process more consistent with
DefineIndex(), and the code is refactored with the addition of a routine
to create an IndexInfo node.
Reported-by: Manuel Rigger
Author: Michael Paquier
Discussion: https://postgr.es/m/CA+u7OA5Hp0ra235F3czPom_FyAd-3+XwSJmX95r1+sRPOJc9VQ@mail.gmail.com
Backpatch-through: 12
Thomas Munro [Sun, 28 Jul 2019 22:12:37 +0000 (10:12 +1200)]
Avoid macro clash with LLVM 9.
Early previews of LLVM 9 reveal that our Min() macro causes compiler
errors in LLVM headers reached by the #include directives in
llvmjit_inline.cpp. Let's just undefine it. Per buildfarm animal
seawasp. Back-patch to 11.
Reviewed-by: Fabien Coelho, Tom Lane
Discussion: https://postgr.es/m/20190606173216.GA6306%40alvherre.pgsql
Tom Lane [Sun, 28 Jul 2019 16:02:27 +0000 (12:02 -0400)]
Improve test coverage for LISTEN/NOTIFY.
We had no actual end-to-end test of NOTIFY message delivery. In the
core async.sql regression test, testing this is problematic because psql
traditionally prints the PID of the sending backend, making the output
unstable. We also have an isolation test script, but it likewise
failed to prove that delivery worked, because isolationtester.c had
no provisions for detecting/reporting NOTIFY messages.
Hence, add such provisions to isolationtester.c, and extend
async-notify.spec to include direct tests of basic NOTIFY functionality.
I also added tests showing that NOTIFY de-duplicates messages normally,
but not across subtransaction boundaries. (That's the historical
behavior since we introduced subtransactions, though perhaps we ought
to change it.)
Patch by me, with suggestions/review by Andres Freund.
Tom Lane [Sun, 28 Jul 2019 00:21:54 +0000 (20:21 -0400)]
Fix isolationtester race condition for notices sent before blocking.
If a test sends a notice just before blocking, it's possible on
slow machines for isolationtester to detect the blocked state before
it's consumed the notice. (For this to happen, the notice would have
to arrive after isolationtester has waited for data for 10ms, so on
fast/lightly-loaded machines it's hard to reproduce the failure.)
But, if we have seen the backend as blocked, it's certainly already
sent any notices it's going to send. Therefore, one more round of
PQconsumeInput and PQisBusy should be enough to collect and process
any such notices.
This appears to explain the instability noted in commit ebd499282, so undo
the hack therein to not print notices from insert-conflict-specconflict.
Tom Lane [Sat, 27 Jul 2019 19:59:57 +0000 (15:59 -0400)]
Don't drop NOTICE messages in isolation tests.
For its entire existence, isolationtester.c has forced client_min_messages
to WARNING, but that seems like a very poor choice of test design. It
should be up to individual test scripts to manage whether they emit notices
and to ensure that the results are stable. (There were no NOTICE messages
in the original set of isolation tests, so this was certainly dead code
when committed, but perhaps it was needed at some earlier point.)
It's possible that the original motivation was due to platform-dependent
variations in the timing of stdout vs. stderr output. That should be
moot since commits 73bcb76b7/6eda3e9c2, but just in case, adjust
isotesterNoticeProcessor to print to stdout not stderr. (stderr seems
like the wrong thing anyway: it should be for error printouts not expected
test output.)
Testing shows that the notices in insert-conflict-specconflict are indeed
a bit timing-unstable on very slow machines, so hide them; maybe we can
improve that later. Also, make the notices in plpgsql-toast a bit less
verbose than the original code would've had them.
Michael Paquier [Sat, 27 Jul 2019 13:21:18 +0000 (22:21 +0900)]
Add support for --jobs in reindexdb
When doing a schema-level or a database-level operation, a list of
relations to build is created which gets processed in parallel using
multiple connections, based on the recent refactoring for parallel slots
in src/bin/scripts/. System catalogs are processed first in a
serialized fashion to prevent deadlocks, followed by the rest done in
parallel.
This new option is not compatible with --system as reindexing system
catalogs in parallel can lead to deadlocks, and with --index as there is
no conflict handling for indexes rebuilt in parallel depending in the
same relation.
Author: Julien Rouhaud Reviewed-by: Sergei Kornilov, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_YrnH_Jqo46NhaJ7uRBiWWEcS40VNRQxgFbqYo9kApUsg@mail.gmail.com
Peter Eisentraut [Sat, 27 Jul 2019 05:56:20 +0000 (07:56 +0200)]
pg_upgrade: Default new bindir to pg_upgrade location
Make the directory where the pg_upgrade binary resides the default for
new bindir, as running the pg_upgrade binary from where the new
cluster is installed is a very common scenario. Setting this as the
defauly bindir for the new cluster will remove the need to provide it
explicitly via -B in many cases.
To support directories being missing from option parsing, extend the
directory check with a missingOk mode where the path must be filled at
a later point before being used. Also move the exec_path check to
earlier in setup to make sure we know the new cluster bindir when we
scan for required executables.
This removes the exec_path from the OSInfo struct as it is not used
anywhere.
Author: Daniel Gustafsson <daniel@yesql.se> Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
Peter Eisentraut [Sat, 27 Jul 2019 05:48:08 +0000 (07:48 +0200)]
pg_upgrade: Check all used executables
Expand the validate_exec() calls to cover all the used binaries.
Author: Daniel Gustafsson <daniel@yesql.se> Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
Tom Lane [Fri, 26 Jul 2019 17:07:08 +0000 (13:07 -0400)]
Tweak our special-case logic for the IANA "Factory" timezone.
pg_timezone_names() tries to avoid showing the "Factory" zone in
the view, mainly because that has traditionally had a very long
"abbreviation" such as "Local time zone must be set--see zic manual page",
so that showing it messes up psql's formatting of the whole view.
Since tzdb version 2016g, IANA instead uses the abbreviation "-00",
which is sane enough that there's no reason to discriminate against it.
On the other hand, it emerges that FreeBSD and possibly other packagers
are so wedded to backwards compatibility that they hack the IANA data
to keep the old spelling --- and not just that old spelling, but even
older spellings that IANA used back in the stone age. This caused the
filter logic to fail to suppress "Factory" at all on such platforms,
though the formatting problem is definitely real in that case.
To solve both problems, get rid of the hard-wired assumption about
exactly what Factory's abbreviation is, and instead reject abbreviations
exceeding 31 characters. This will allow Factory to appear in the view
if and only if it's using the modern abbreviation.
In passing, simplify the code we add to zic.c to support "zic -P"
to remove its now-obsolete hacks to not print the Factory zone's
abbreviation. Unlike pg_timezone_names(), there's no reason for
that code to support old/nonstandard timezone data.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Tom Lane [Fri, 26 Jul 2019 16:45:32 +0000 (12:45 -0400)]
Avoid choosing "localtime" or "posixrules" as TimeZone during initdb.
Some platforms create a file named "localtime" in the system
timezone directory, making it a copy or link to the active time
zone file. If Postgres is built with --with-system-tzdata, initdb
will see that file as an exact match to localtime(3)'s behavior,
and it may decide that "localtime" is the most preferred spelling of
the active zone. That's a very bad choice though, because it's
neither informative, nor portable, nor stable if someone changes
the system timezone setting. Extend the preference logic added by
commit e3846a00c so that we will prefer any other zone file that
matches localtime's behavior over "localtime".
On the same logic, also discriminate against "posixrules", which
is another not-really-a-zone file that is often present in the
timezone directory. (Since we install "posixrules" but not
"localtime", this change can affect the behavior of Postgres
with or without --with-system-tzdata.)
Note that this change doesn't prevent anyone from choosing these
pseudo-zones if they really want to (i.e., by setting TZ for initdb,
or modifying the timezone GUC later on). It just prevents initdb
from preferring these zone names when there are multiple matches to
localtime's behavior.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Tom Lane [Fri, 26 Jul 2019 15:59:00 +0000 (11:59 -0400)]
Fix loss of fractional digits for large values in cash_numeric().
Money values exceeding about 18 digits (depending on lc_monetary)
could be inaccurately converted to numeric, due to select_div_scale()
deciding it didn't need to compute any fractional digits. Force
its hand by setting the dscale of one division input to equal the
number of fractional digits we need.
In passing, rearrange the logic to not do useless work in locales
where money values are considered integral.
Per bug #15925 from Slawomir Chodnicki. Back-patch to all supported
branches.
Peter Eisentraut [Thu, 25 Jul 2019 15:23:36 +0000 (17:23 +0200)]
doc: Make libpq documentation navigable between functions
Turn most mentions of libpq functions into links. At id attributes to
most libpq functions, where not existing yet, so that they can be
linked to. (In a handful of cases there were problems with the PDF
processing toolchain, so those instances were not changed.)
Author: Fabien COELHO <coelho@cri.ensmp.fr> Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1905121032330.27203@lancre
Peter Eisentraut [Thu, 25 Jul 2019 14:50:42 +0000 (16:50 +0200)]
doc: Fix some markup whitespace issues
When making an xref to a varlistentry, the stylesheets use the first
<term> as the link text. In the cases fixed here, the <term> element
contained extra whitespace that ended up being part of the link text,
which looked strange in the output in some cases. This whitespace is
significant, so remove it since we don't want it.
Peter Eisentraut [Thu, 25 Jul 2019 12:43:13 +0000 (14:43 +0200)]
doc: Change libpq function ids to mixed case
The ids for linking to libpq functions were previously all lower-case.
Change to mixed-case, matching the actual function name, for easier
readability in the source. The output isn't changed in a significant
way, since the ids are converted to lower or upper case for file names
and anchors.
Thomas Munro [Thu, 25 Jul 2019 22:01:18 +0000 (10:01 +1200)]
Fix LDAP test instability.
After starting slapd, wait until it can accept a connection before
beginning the real test work. This avoids occasional test failures.
Back-patch to 11, where the LDAP tests arrived.
Author: Thomas Munro Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20190719033013.GI1859%40paquier.xyz
Andres Freund [Thu, 25 Jul 2019 21:22:52 +0000 (14:22 -0700)]
Fix slot type handling for Agg nodes performing internal sorts.
Since 15d8f8312 we assert that - and since 7ef04e4d2cb2, 4da597edf1
rely on - the slot type for an expression's
ecxt_{outer,inner,scan}tuple not changing, unless explicitly flagged
as such. That allows to either skip deforming (for a virtual tuple
slot) or optimize the code for JIT accelerated deforming
appropriately (for other known slot types).
This assumption was sometimes violated for grouping sets, when
nodeAgg.c internally uses tuplesorts, and the child node doesn't
return a TTSOpsMinimalTuple type slot. Detect that case, and flag that
the outer slot might not be "fixed".
It's probably worthwhile to optimize this further in the future, and
more granularly determine whether the slot is fixed. As we already
instantiate per-phase transition and equal expressions, we could
cheaply set the slot type appropriately for each phase. But that's a
separate change from this bugfix.
This commit does include a very minor optimization by avoiding to
create a slot for handling tuplesorts, if no such sorts are
performed. Previously we created that slot unnecessarily in the common
case of computing all grouping sets via hashing. The code looked too
confusing without that, as the conditions for needing a sort slot and
flagging that the slot type isn't fixed, are the same.
Reported-By: Ashutosh Sharma
Author: Andres Freund
Discussion: https://postgr.es/m/CAE9k0PmNaMD2oHTEAhRyxnxpaDaYkuBYkLa1dpOpn=RS0iS2AQ@mail.gmail.com
Backpatch: 12-, where the bug was introduced in 15d8f8312
Tom Lane [Thu, 25 Jul 2019 16:10:54 +0000 (12:10 -0400)]
Fix failures to ignore \r when reading Windows-style newlines.
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Andrew Dunstan [Thu, 25 Jul 2019 15:24:23 +0000 (11:24 -0400)]
Honor MSVC WindowsSDKVersion if set
Add a line to the project file setting the target SDK. Otherwise, in for
example VS2017, if the default but optional 8.1 SDK is not installed the
build will fail.
Tom Lane [Thu, 25 Jul 2019 15:02:43 +0000 (11:02 -0400)]
Fix contrib/sepgsql test policy to work with latest SELinux releases.
As of Fedora 30, it seems that the system-provided macros for setting
up user privileges in SELinux policies don't grant the ability to read
/etc/passwd, as they formerly did. This restriction breaks psql
(which tries to use getpwuid() to obtain the user name it's running
under) and thereby the contrib/sepgsql regression test. Add explicit
specifications that we need the right to read /etc/passwd.
Mike Palmiotto, per a report from me. Back-patch to all supported
branches.
Andres Freund [Thu, 25 Jul 2019 01:45:58 +0000 (18:45 -0700)]
Fix system column accesses in ON CONFLICT ... RETURNING.
After 277cb789836 ON CONFLICT ... SET ... RETURNING failed with
ERROR: virtual tuple table slot does not have system attributes
when taking the update path, as the slot used to insert into the
table (and then process RETURNING) was defined to be a virtual slot in
that commit. Virtual slots don't support system columns except for
tableoid and ctid, as the other system columns are AM dependent.
Fix that by using a slot of the table's type. Add tests for system
column accesses in ON CONFLICT ... RETURNING.
Reported-By: Roby, bisected to the relevant commit by Jeff Janes
Author: Andres Freund
Discussion: https://postgr.es/m/73436355-6432-49B1-92ED-1FE4F7E7E100@finefun.com.au
Backpatch: 12-, where the bug was introduced in 277cb789836
Tom Lane [Wed, 24 Jul 2019 22:14:26 +0000 (18:14 -0400)]
Fix infelicities in describeOneTableDetails' partitioned-table handling.
describeOneTableDetails issued a partition-constraint-fetching query
for every table, even ones it knows perfectly well are not partitions.
To add insult to injury, it then proceeded to leak the empty PGresult
if the table wasn't a partition. Doing that a lot of times might
amount to a meaningful leak, so this seems like a back-patchable bug.
Fix that, and also fix a related PGresult leak in the partition-parent
case (though that leak would occur only if we got no row, which is
unexpected).
Minor code beautification too, to make this code look more like the
pre-existing code around it.
Back-patch the whole change into v12. However, the fact that we already
know whether the table is a partition dates only to commit 1af25ca0c;
back-patching the relevant changes from that is probably more churn
than is justified in released branches. Hence, in v11 and v10, just
do the minimum to fix the PGresult leaks.
Noted while messing around with adjacent code for yesterday's \d
improvements.
Use full 64-bit XID for checking if a deleted GiST page is old enough.
Otherwise, after a deleted page gets even older, it becomes unrecyclable
again. B-tree has the same problem, and has had since time immemorial,
but let's at least fix this in GiST, where this is new.
Backpatch to v12, where GiST page deletion was introduced.
The explicit check in gistScanPage() isn't currently really necessary, as
a deleted page is always empty, so the loop would fall through without
doing anything, anyway. But it's a marginal optimization, and it gives a
nice place to attach a comment to explain how it works.
Backpatch to v12, where GiST page deletion was introduced.
Andrew Dunstan [Wed, 24 Jul 2019 15:41:39 +0000 (11:41 -0400)]
Don't assume expr is available in pgbench tests
Windows hosts do not normally come with expr, so instead of using that
to test the \setshell command, use echo instead, which is fairly
universally available.
Michael Paquier [Wed, 24 Jul 2019 02:25:43 +0000 (11:25 +0900)]
Doc: Clarify interactions of pg_receivewal with remote_apply
Using pg_receivewal with synchronous_commit = remote_apply set in the
backend is incompatible if pg_receivewal is a synchronous standby as it
never applies WAL, so document this problem and solutions to it.
Backpatch to 9.6, where remote_apply has been added.
Author: Robert Haas, Jesper Pedersen Reviewed-by: Laurenz Albe, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/1427a2d3-1e51-9335-1931-4f8853d90d5e@redhat.com
Backpatch-through: 9.6
Michael Paquier [Wed, 24 Jul 2019 01:53:39 +0000 (10:53 +0900)]
Improve stability of TAP test for synchronous replication
Slow buildfarm machines have run into issues with this TAP test caused
by a race condition related to the startup of a set of standbys, where
it is possible to finish with an unexpected order in the WAL sender
array of the primary.
This closes the race condition by making sure that any standby started
is registered into the WAL sender array of the primary before starting
the next one based on lookups of pg_stat_replication.
Backpatch down to 9.6 where the test has been introduced.
Check that partitions are not in use when dropping constraints
If the user creates a deferred constraint in a partition, and in a
transaction they cause the constraint's trigger execution to be deferred
until commit time *and* drop the constraint, then when commit time comes
the queued trigger will fail to run because the trigger object will have
been dropped.
This is explained because when a constraint gets dropped in a
partitioned table, the recursion to drop the ones in partitions is done
by the dependency mechanism, not by ALTER TABLE traversing the recursion
tree as in all other cases. In the non-partitioned case, this problem
is avoided by checking that the table is not "in use" by alter-table;
other alter-table subcommands that recurse to partitions do that check
for each partition. But the dependency mechanism doesn't have a way to
do that. Fix the problem by applying the same check to all partitions
during ALTER TABLE's "prep" phase, which correctly raises the necessary
error.
Tom Lane [Tue, 23 Jul 2019 21:04:21 +0000 (17:04 -0400)]
Improve psql's \d output for partitioned indexes.
Include partitioning information much as we do for partitioned tables.
(However, \d+ doesn't show the partition bounds, because those are
not stored for indexes.)
In passing, fix a couple of queries to look less messy in -E output.
Also, add some tests for \d on tables with nondefault tablespaces.
(Somebody previously added a rather silly number of tests for \d
on partitioned indexes, yet completely neglected other cases.)
Tom Lane [Tue, 23 Jul 2019 19:25:56 +0000 (15:25 -0400)]
Improve psql's \d output for TOAST tables.
Add the name of the owning table to the footers for a TOAST table.
Also, show all the same footers as for a regular table (in practice,
this adds the index and perhaps the tablespace and access method).
Tom Lane [Mon, 22 Jul 2019 18:55:22 +0000 (14:55 -0400)]
Install dependencies to prevent dropping partition key columns.
The logic in ATExecDropColumn that rejects dropping partition key
columns is quite an inadequate defense, because it doesn't execute
in cases where a column needs to be dropped due to cascade from
something that only the column, not the whole partitioned table,
depends on. That leaves us with a badly broken partitioned table;
even an attempt to load its relcache entry will fail.
We really need to have explicit pg_depend entries that show that the
column can't be dropped without dropping the whole table. Hence,
add those entries. In v12 and HEAD, bump catversion to ensure that
partitioned tables will have such entries. We can't do that in
released branches of course, so in v10 and v11 this patch affords
protection only to partitioned tables created after the patch is
installed. Given the lack of field complaints (this bug was found
by fuzz-testing not by end users), that's probably good enough.
In passing, fix ATExecDropColumn and ATPrepAlterColumnType
messages to be more specific about which partition key column
they're complaining about.
Per report from Manuel Rigger. Back-patch to v10 where partitioned
tables were added.
Peter Eisentraut [Mon, 22 Jul 2019 12:40:55 +0000 (14:40 +0200)]
initdb: Change authentication defaults
Change the defaults for the pg_hba.conf generated by initdb to "peer"
for local (if supported, else "md5") and "md5" for host.
(Changing from "md5" to SCRAM is left as a separate exercise.)
"peer" is currently not supported on AIX, HP-UX, and Windows. Users
on those operating systems will now either have to provide a password
to initdb or choose a different authentication method when running
initdb.
David Rowley [Mon, 22 Jul 2019 12:14:11 +0000 (00:14 +1200)]
Use appendBinaryStringInfo in more places where the length is known
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Peter Eisentraut [Mon, 22 Jul 2019 10:05:03 +0000 (12:05 +0200)]
Make identity sequence management more robust
Some code could get confused when certain catalog state involving both
identity and serial sequences was present, perhaps during an attempt
to upgrade the latter to the former. Specifically, dropping the
default of a serial column maintains the ownership of the sequence by
the column, and so it would then be possible to afterwards make the
column an identity column that would now own two sequences. This
causes the code that looks up the identity sequence to error out,
making the new identity column inoperable until the ownership of the
previous sequence is released.
To fix this, make the identity sequence lookup only consider sequences
with the appropriate dependency type for an identity sequence, so it
only ever finds one (unless something else is broken). In the above
example, the old serial sequence would then be ignored. Reorganize
the various owned-sequence-lookup functions a bit to make this
clearer.
David Rowley [Mon, 22 Jul 2019 07:03:12 +0000 (19:03 +1200)]
Make better use of the new List implementation in a couple of places
In nodeAppend.c and nodeMergeAppend.c there were some foreach loops which
looped over the list of subplans and only performed any work if the
subplan index was found in a Bitmapset. With the old linked list
implementation of List, this form made sense as accessing the Nth list
element was O(N). However, thanks to 1cff1b95a we now have array-based
lists, so accessing the Nth element has become O(1).
Here we make the most of the O(1) lookups and just loop over the set
members of the Bitmapset with bms_next_member(). This performs slightly
better when a small number of the list items are in the Bitmapset. Micro
benchmarks show that when the Bitmapset contains all or most of the list
items then the new code is ever so slightly slower. In practice, the cost
is so small that it's drowned out by various other things such as locking
the relations belonging to each subplan, etc.
The primary goal here is to leave better code examples around which benefit
better from the new list implementation.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAKJS1f8ZcsLVgkF4wOfRyMYTcPgLFiUAOedFC+U2vK_aFZk-BA@mail.gmail.com
David Rowley [Sun, 21 Jul 2019 22:29:41 +0000 (10:29 +1200)]
Adjust overly strict Assert
3373c7155 changed how we determine EquivalenceClasses for relations and
added an Assert to ensure all relations mentioned in each EC's ec_relids
was a RELOPT_BASEREL. However, the join removal code may remove a LEFT
JOIN and since it does not clean up EC members belonging to the removed
relations it can leave RELOPT_DEADREL rels in ec_relids.
Fix this by adjusting the Assert to allow RELOPT_DEADREL rels too.
Reported-by: sqlsmith via Andreas Seltenreich
Discussion: https://postgr.es/m/87y30r8sls.fsf@ansel.ydns.eu
Tom Lane [Sun, 21 Jul 2019 15:42:11 +0000 (11:42 -0400)]
Remove no-longer-helpful reliance on fixed-size local array.
Coverity complained about this code, apparently because it uses a local
array of size FUNC_MAX_ARGS without a guard that the input argument list
is no longer than that. (Not sure why it complained today, since this
code's been the same for a long time; possibly it re-analyzed everything
the List API change touched?)
Rather than add a guard, though, let's just get rid of the local array
altogether. It was only there to avoid list_nth() calls, and those are
no longer expensive.
David Rowley [Sun, 21 Jul 2019 05:30:58 +0000 (17:30 +1200)]
Speed up finding EquivalenceClasses for a given set of rels
Previously in order to determine which ECs a relation had members in, we
had to loop over all ECs stored in PlannerInfo's eq_classes and check if
ec_relids mentioned the relation. For the most part, this was fine, as
generally, unless queries were fairly complex, the overhead of performing
the lookup would have not been that significant. However, when queries
contained large numbers of joins and ECs, the overhead to find the set of
classes matching a given set of relations could become a significant
portion of the overall planning effort.
Here we allow a much more efficient method to access the ECs which match a
given relation or set of relations. A new Bitmapset field in RelOptInfo
now exists to store the indexes into PlannerInfo's eq_classes list which
each relation is mentioned in. This allows very fast lookups to find all
ECs belonging to a single relation. When we need to lookup ECs belonging
to a given pair of relations, we can simply bitwise-AND the Bitmapsets from
each relation and use the result to perform the lookup.
We also take the opportunity to write a new implementation of
generate_join_implied_equalities which makes use of the new indexes.
generate_join_implied_equalities_for_ecs must remain as is as it can be
given a custom list of ECs, which we can't easily determine the indexes of.
This was originally intended to fix the performance penalty of looking up
foreign keys matching a join condition which was introduced by 100340e2d.
However, we're speeding up much more than just that here.
Author: David Rowley, Tom Lane Reviewed-by: Tom Lane, Tomas Vondra
Discussion: https://postgr.es/m/6970.1545327857@sss.pgh.pa.us
Peter Geoghegan [Sat, 20 Jul 2019 18:11:55 +0000 (11:11 -0700)]
Don't rely on estimates for amcheck Bloom filters.
Solely relying on a relation's reltuples/relpages estimate to size the
Bloom filters used by amcheck verification makes verification less
effective when the estimates are very stale. In extreme cases,
verification options that use Bloom filters internally could be totally
ineffective, without users receiving any clear indication that certain
types of corruption might easily be missed.
To fix, use RelationGetNumberOfBlocks() instead of relpages to size the
downlink block Bloom filter. Use the same RelationGetNumberOfBlocks()
value to derive a minimum size for the heapallindexed Bloom filter,
rather than completely trusting reltuples. Verification will still be
reasonably effective when the projected/estimated number of Bloom filter
elements is at least 1/5 of the final number of elements, which is
assured by the new sizing logic.
Reported-By: Alexander Korotkov
Discussion: https://postgr.es/m/CAH2-Wzk0ke2J42KrNYBKu0Xovjy-sU5ub7PWjgpbsKdAQcL4OA@mail.gmail.com
Backpatch: 11-, where downlink/heapallindexed verification were added.
Tomas Vondra [Thu, 18 Jul 2019 10:28:16 +0000 (12:28 +0200)]
Use column collation for extended statistics
The current extended statistics code was a bit confused which collation
to use. When building the statistics, the collations defined as default
for the data types were used (since commit 5e0928005). The MCV code was
however using the column collations for MCV serialization, and then
DEFAULT_COLLATION_OID when computing estimates. So overall the code was
using all three possible options, inconsistently.
This uses the column colation everywhere - this makes it consistent with
what 5e0928005 did for regular stats. We however do not track the
collations in a catalog, because we can derive them from column-level
information. This may need to change in the future, e.g. after allowing
statistics on expressions.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu Backpatch-to: 12
Tomas Vondra [Fri, 19 Jul 2019 14:28:28 +0000 (16:28 +0200)]
Rework examine_opclause_expression to use varonleft
The examine_opclause_expression function needs to return information on
which side of the operator we found the Var, but the variable was called
"isgt" which is rather misleading (it assumes the operator is either
less-than or greater-than, but it may be equality or something else).
Other places in the planner use a variable called "varonleft" for this
purpose, so just adopt the same convention here.
The code also assumed we don't care about this flag for equality, as
(Var = Const) and (Const = Var) should be the same thing. But that does
not work for cross-type operators, in which case we need to pass the
parameters to the procedure in the right order. So just use the same
code for all types of expressions.
This means we don't need to care about the selectivity estimation
function anymore, at least not in this code. We should only get the
supported cases here (thanks to statext_is_compatible_clause).
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu Backpatch-to: 12
Jeff Davis [Fri, 19 Jul 2019 20:24:33 +0000 (13:24 -0700)]
pg_stat_statements: add missing check for pgss_enabled().
Make pgss_post_parse_analyze() more consistent with the other hooks,
and avoid unnecessary overhead when pg_stat_statements.track=none.
Author: Raymond Martin Reviewed-by: Fabien COELHO
Discussion: https://postgr.es/m/BN8PR21MB1217B003C4F79DE230AA36B9B1580%40BN8PR21MB1217.namprd21.prod.outlook.com
Michael Paquier [Fri, 19 Jul 2019 02:42:33 +0000 (11:42 +0900)]
Doc: clarify when table rewrites happen with column addition and DEFAULT
16828d5 has improved ALTER TABLE so as a column addition does not
require a rewrite for a non-NULL default with constant expressions, but
one spot in the documentation did not get updated consistently.
The documentation also now clarifies the fact that this does not apply
if the expression is volatile, where a table rewrite is still required.
Reported-by: Daniel Westermann
Author: Ian Barwick Reviewed-by: Michael Paquier, Daniel Westermann
Discussion: https://postgr.es/m/DB6PR0902MB2184C7D5645CF15D75EB7957D2CF0@DB6PR0902MB2184.eurprd09.prod.outlook.com
Backpatch-through: 11
Michael Paquier [Fri, 19 Jul 2019 00:31:58 +0000 (09:31 +0900)]
Refactor parallelization processing code in src/bin/scripts/
The existing facility of vacuumdb to handle parallel connections into a
given database with an authentication set is moved to a common file in
src/bin/scripts/, named scripts_parallel.c. This introduces a set of
routines to initialize, wait and terminate a set of connections,
simplifying a bit the code of vacuumdb on the way. More routines
related to result handling and database connection are moved to
common.c.
The initial plan is to use that for reindexdb, but it could be applied
to other tools like clusterdb.
While on it, clean up a set of variables "progname" which were defined
as routine arguments for error messages. Since most of the callers have
switched to pg_log_error() and such there is no need for this variable.
Author: Julien Rouhaud Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CAOBaU_YrnH_Jqo46NhaJ7uRBiWWEcS40VNRQxgFbqYo9kApUsg@mail.gmail.com
Jeff Davis [Thu, 18 Jul 2019 19:42:39 +0000 (12:42 -0700)]
Fix daterange canonicalization for +/- infinity.
The values 'infinity' and '-infinity' are a part of the DATE type
itself, so a bound of the date 'infinity' is not the same as an
unbounded/infinite range. However, it is still wrong to try to
canonicalize such values, because adding or subtracting one has no
effect. Fix by treating 'infinity' and '-infinity' the same as
unbounded ranges for the purposes of canonicalization (but not other
purposes).
Backpatch to all versions because it is inconsistent with the
documented behavior. Note that this could be an incompatibility for
applications relying on the behavior contrary to the documentation.
Author: Laurenz Albe Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/77f24ea19ab802bc9bc60ddbb8977ee2d646aec1.camel%40cybertec.at
Backpatch-through: 9.4
Peter Geoghegan [Thu, 18 Jul 2019 20:22:56 +0000 (13:22 -0700)]
Fix nbtree metapage cache upgrade bug.
Commit 857f9c36cda, which taught nbtree VACUUM to avoid unnecessary
index scans, bumped the nbtree version number from 2 to 3, while adding
the ability for nbtree indexes to be upgraded on-the-fly. Various
assertions that assumed that an nbtree index was always on version 2 had
to be changed to accept any supported version (version 2 or 3 on
Postgres 11).
However, a few assertions were missed in the initial commit, all of
which were in code paths that cache a local copy of the metapage
metadata, where the index had been expected to be on the current version
(no longer version 2) as a generic sanity check. Rather than simply
update the assertions, follow-up commit 0a64b45152b intentionally made
the metapage caching code update the per-backend cached metadata version
without changing the on-disk version at the same time. This could even
happen when the planner needed to determine the height of a B-Tree for
costing purposes. The assertions only fail on Postgres v12 when
upgrading from v10, because they were adjusted to use the authoritative
shared memory metapage by v12's commit dd299df8.
To fix, remove the cache-only upgrade mechanism entirely, and update the
assertions themselves to accept any supported version (go back to using
the cached version in v12). The fix is almost a full revert of commit 0a64b45152b on the v11 branch.
VACUUM only considers the authoritative metapage, and never bothers with
a locally cached version, whereas everywhere else isn't interested in
the metapage fields that were added by commit 857f9c36cda. It seems
unlikely that this bug has affected any user on v11.
Reported-By: Christoph Berg
Bug: #15896
Discussion: https://postgr.es/m/15896-5b25e260fdb0b081%40postgresql.org
Backpatch: 11-, where VACUUM was taught to avoid unnecessary index scans.
Tom Lane [Thu, 18 Jul 2019 14:37:13 +0000 (10:37 -0400)]
Further adjust SPITupleTable to provide a public row-count field.
Now that commit fec0778c8 drew a clear line between public and private
fields in SPITupleTable, it seems pretty silly that the count of valid
tuples isn't on the public side of that line. The reason why not was
that there wasn't such a count. For reasons lost in the mists of time,
spi.c preferred to keep a count of remaining free entries in the array.
But that seems pretty pointless: it's unlike the way we handle similar
code everywhere else, and it involves extra subtractions that surely
outweigh having to do a comparison rather than test-for-zero to check
for array-full.
Hence, rearrange so that this code does the expansible array logic
the same as everywhere else, with a count of valid entries alongside
the allocated array length. And document the count as public.
I looked for core-code callers where it would make sense to start
relying on tuptable->numvals rather than the separate SPI_processed
variable. Right now there don't seem to be places where it'd be
a win to do so without more code restructuring than I care to
undertake today. In principle, though, having SPITupleTables be
fully self-contained should be helpful down the line.
Tomas Vondra [Wed, 17 Jul 2019 16:16:50 +0000 (18:16 +0200)]
Simplify bitmap updates in multivariate MCV code
When evaluating clauses on a multivariate MCV list, we build a bitmap
tracking how the clauses match each item of the MCV list. When updating
the bitmap we need to consider the current value (tracking how the item
matches preceding clauses), match for the current clause and whether the
clauses are connected by AND or OR.
Until now the logic was copied on every place updating the bitmap, which
was not quite readable. So just move it to a separate function and call
it where needed.
Backpatch to 12, where the code was introduced. While not a bugfix, this
should make maintenance and future backpatches easier.
Tomas Vondra [Mon, 15 Jul 2019 00:00:31 +0000 (02:00 +0200)]
Fix handling of NULLs in MCV items and constants
There were two issues in how the extended statistics handled NULL values
in opclauses. Firstly, the code was oblivious to the possibility that
Const may be NULL (constisnull=true) in which case the constvalue is
undefined. We need to treat this as a mismatch, and not call the proc.
Secondly, the MCV item itself may contain NULL values too - the code
already did check that, and updated the match bitmap accordingly, but
failed to ensure we won't call the operator procedure anyway. It did
work for AND-clauses, because in that case false in the bitmap stops
evaluation of further clauses. But for OR-clauses ir was not easy to
get incorrect estimates or even trigger a crash.
This fixes both issues by extending the existing check so that it looks
at constisnull too, and making sure it skips calling the procedure.
Tomas Vondra [Fri, 12 Jul 2019 22:12:16 +0000 (00:12 +0200)]
Fix handling of opclauses in extended statistics
We expect opclauses to have exactly one Var and one Const, but the code
was checking the Const by calling is_pseudo_constant_clause() which is
incorrect - we need a proper constant.
Fixed by using plain IsA(x,Const) to check type of the node. We need to
do these checks in two places, so move it into a separate function that
can be called in both places.
Reported by Andreas Seltenreich, based on crash reported by sqlsmith.
Tomas Vondra [Wed, 17 Jul 2019 16:13:39 +0000 (18:13 +0200)]
Remove unnecessary TYPECACHE_GT_OPR lookup
The TYPECACHE_GT_OPR is not needed (it used to be in older version of
the MCV code), but the compiler failed to detect this as the result was
used in a fmgr_info() call, populating a FmgrInfo entry.
Michael Paquier [Thu, 18 Jul 2019 01:05:59 +0000 (10:05 +0900)]
Simplify description of --data-checksums in documentation of initdb
The documentation mentioned that data checksums cannot be changed after
initialization, which is not true as pg_checksums can do that with its
--enable option introduced in v12. This simply removes the sentence
telling so.
Reported-by: Basil Bourque
Author: Michael Paquier Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/15909-e9d74271f1647472@postgresql.org
Backpatch-through: 12
Tom Lane [Wed, 17 Jul 2019 22:26:23 +0000 (18:26 -0400)]
Sync our copy of the timezone library with IANA release tzcode2019b.
A large fraction of this diff is just due to upstream's somewhat
random decision to rename a bunch of internal variables and struct
fields. However, there is an interesting new feature in zic:
it's grown a "-b slim" option that emits zone files without 32-bit
data and other backwards-compatibility hacks. We should consider
whether we wish to enable that.
projects / postgresql / log