Michael J Gruber [Mon, 22 Mar 2010 13:36:30 +0000 (14:36 +0100)]
rev-list: use default abbrev length when abbrev-commit is in effect
Currently, rev-list has a default of "0" for abbrev which means that
switching on abbreviations with --abbrev-commit has no visible effect,
even though the option is documented.
Set abbrev to DEFAULT_ABBREV so that --abbrev-commit has the same effect
as for log.
Reported-by: Eli Barzilay <eli@barzilay.org> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 22 Mar 2010 00:00:22 +0000 (17:00 -0700)]
Merge branch 'maint-1.6.6' into maint
* maint-1.6.6:
Documentation/git-clone: Transform description list into item list
Documentation/urls: Remove spurious example markers
Documentation/gitdiffcore: Remove misleading date in heading
Documentation/git-reflog: Fix formatting of command lists
Michael J Gruber [Sun, 21 Mar 2010 17:30:19 +0000 (18:30 +0100)]
Documentation/git-clone: Transform description list into item list
so that the list of examples is formatted in the same way as for
git-fetch, and, more importantly, the different identation for the
code blocks in the examples (compared to the immediately preceding code
blocks from url.txt) doesn't look like misformatted, but is clarified by
the items' bullets.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Sun, 21 Mar 2010 17:30:18 +0000 (18:30 +0100)]
Documentation/urls: Remove spurious example markers
In urls.txt (which is included from git-{clone,fetch,push}.txt)
several item lists are surrounded by example block markers. This is
problematic for two reasons:
- None of these lists are example lists, so they should not be marked as
such semantically.
- The html output looks weird (bulleted list with left sidebar).
Therefore, remove the example block markers. Output by the man backend
is unaffected.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Sun, 21 Mar 2010 17:30:17 +0000 (18:30 +0100)]
Documentation/gitdiffcore: Remove misleading date in heading
Ever since the automatic conversion into man form, the heading
contained a misidentified subheading reading "June 2005".
Remove this since the documentation is more recent, and the correct
date is in the footer.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Imre Deak [Sat, 20 Mar 2010 02:23:58 +0000 (04:23 +0200)]
daemon: parse_host_and_port SIGSEGV if port is specified
This typo will lead to git-daemon dying any time the connect
string includes a port after the host= attribute. This can lead
for example to one of the following error messages on the client
side when someone tries git clone git://...:<port>.
When the daemon is running on localhost:
fatal: The remote end hung up unexpectedly
or when the daemon is connected through an ssh tunnel:
fatal: protocol error: bad line length character: erro
In the latter case 'erro' comes from the daemon's reply:
error: git-daemon died of signal 11
Signed-off-by: Imre Deak <imre.deak@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sat, 20 Mar 2010 00:06:15 +0000 (19:06 -0500)]
Makefile: Fix CDPATH problem
If CDPATH is set, "cd" prints its destination to stdout, causing
the common (cd a && tar cf - .) | (cd b && tar xf -) idiom to fail.
For example:
make -C templates DESTDIR='' install
make[1]: Entering directory `/users/e477610/exptool/src/git-1.7.0.2/templates'
install -d -m 755 '/home/e477610/exptool/share/git-core/templates'
(cd blt && gtar cf - .) | \
(cd '/home/e477610/exptool/share/git-core/templates' && umask 022 && gtar xof -)
gtar: This does not look like a tar archive
Most git scripts already protect against use of CDPATH through
git-sh-setup, but the Makefile doesn’t.
Reported-by: Michael Cox <mhcox@bluezoosoftware.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Wed, 17 Mar 2010 11:14:57 +0000 (12:14 +0100)]
Documentation: receive.denyCurrentBranch defaults to 'refuse'
acd2a45 (Refuse updating the current branch in a non-bare repository
via push, 2009-02-11) changed the default to refuse such a push, but
it forgot to update the docs.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ian Ward Comfort [Wed, 17 Mar 2010 09:20:35 +0000 (02:20 -0700)]
bash: complete *_HEAD refs if present
We already complete HEAD, of course, and might as well complete the other
common refs mentioned in the rev-parse man page: FETCH_HEAD, ORIG_HEAD, and
MERGE_HEAD.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Mon, 15 Mar 2010 10:54:45 +0000 (11:54 +0100)]
Documentation/git-read-tree: fix table layout
Asciidoc takes the first non-space character in the first line of the
paragraph as a reference point for preformatted layout, so adjust to
that to make the table align.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dave Olszewski [Sat, 13 Mar 2010 22:47:05 +0000 (14:47 -0800)]
don't use default revision if a rev was specified
If a revision is specified, it happens not to have any commits, don't
use the default revision. By doing so, surprising and undesired
behavior can happen, such as showing the reflog for HEAD when a branch
was specified.
[jc: squashed a test from René]
Signed-off-by: Dave Olszewski <cxreg@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 13 Mar 2010 17:37:50 +0000 (18:37 +0100)]
for_each_recent_reflog_ent(): use strbuf, fix offset handling
As Vladimir reported, "git log -g refs/stash" surprisingly showed the reflog
of HEAD if the message in the reflog file was too long. To fix this, convert
for_each_recent_reflog_ent() to use strbuf_getwholeline() instead of fgets(),
for safety and to avoid any size limits for reflog entries.
Also reverse the logic of the part of the function that only looks at file
tails. It used to close the file if fgets() succeeded. The following
fgets() call in the while loop was likely to fail in this case, too, so
passing an offset to for_each_recent_reflog_ent() never worked. Change it to
error out if strbuf_getwholeline() fails instead.
Reported-by: Vladimir Panteleev <vladimir@thecybershadow.net> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 13 Mar 2010 10:25:12 +0000 (11:25 +0100)]
blame: fix indent of line numbers
Correct the calculation of the number of digits for line counts of the
form 10^n-1 (9, 99, ...) in lineno_width(). This makes blame stop
printing an extra space before the line numbers of files with that many
total lines.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 8 Mar 2010 08:36:02 +0000 (00:36 -0800)]
Merge branch 'gb/maint-submodule-env' into maint
* gb/maint-submodule-env:
is_submodule_modified(): clear environment properly
submodules: ensure clean environment when operating in a submodule
shell setup: clear_local_git_env() function
rev-parse: --local-env-vars option
Refactor list of of repo-local env vars
Junio C Hamano [Mon, 8 Mar 2010 08:36:00 +0000 (00:36 -0800)]
Merge branch 'jc/fetch-param' into maint
* jc/fetch-param:
fetch --all/--multiple: keep all the fetched branch information
builtin-fetch --all/--multi: propagate options correctly
t5521: fix and modernize
Junio C Hamano [Mon, 8 Mar 2010 08:36:00 +0000 (00:36 -0800)]
Merge branch 'ne/pack-local-doc' into maint
* ne/pack-local-doc:
pack-objects documentation: Fix --honor-pack-keep as well.
pack-objects documentation: reword "objects that appear in the standard input"
Documentation: pack-objects: Clarify --local's semantics.
Junio C Hamano [Mon, 8 Mar 2010 08:36:00 +0000 (00:36 -0800)]
Merge branch 'mm/mkstemps-mode-for-packfiles' into maint
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
Junio C Hamano [Sun, 7 Mar 2010 22:54:01 +0000 (14:54 -0800)]
Merge branch 'sp/maint-push-sideband' into maint-1.6.6
* sp/maint-push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
Stephen Boyd [Fri, 5 Mar 2010 08:20:38 +0000 (00:20 -0800)]
t7406: Fix submodule init config tests
These tests have been broken since they were introduced in commits ca2cedb (git-submodule: add support for --rebase., 2009-04-24) and 42b4917 (git-submodule: add support for --merge., 2009-06-03).
'git submodule init' expects the submodules to exist in the index.
In this case, the submodules don't exist and therefore looking for
the submodules will always fail. To make matters worse, git submodule
fails visibly to the user by saying:
error: pathspec 'rebasing' did not match any file(s) known to git.
Did you forget to 'git add'?
but doesn't return an error code. This allows the test to fail silently.
Fix it by adding the submodules first.
Cc: Johan Herland <johan@herland.net> Cc: Peter Hutterer <peter.hutterer@who-t.net> Cc: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 5 Mar 2010 06:27:04 +0000 (22:27 -0800)]
Merge branch 'jn/maint-fix-pager' into maint
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
Junio C Hamano [Fri, 5 Mar 2010 06:26:05 +0000 (22:26 -0800)]
Merge branch 'np/compress-loose-object-memsave' into maint
* np/compress-loose-object-memsave:
sha1_file: be paranoid when creating loose objects
sha1_file: don't malloc the whole compressed result when writing out objects
Junio C Hamano [Wed, 3 Mar 2010 06:54:50 +0000 (22:54 -0800)]
Merge branch 'sp/maint-push-sideband' into maint
* sp/maint-push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
Junio C Hamano [Wed, 3 Mar 2010 06:28:49 +0000 (22:28 -0800)]
Merge branch 'np/fast-import-idx-v2' into maint
* np/fast-import-idx-v2:
fast-import: use the diff_delta() max_delta_size argument
fast-import: honor pack.indexversion and pack.packsizelimit config vars
fast-import: make default pack size unlimited
fast-import: use write_idx_file() instead of custom code
fast-import: use sha1write() for pack data
fast-import: start using struct pack_idx_entry
This commit fixes a bug in processing project-specific override in
a situation when there is no project, e.g. for the projects list page.
When 'snapshot' feature had project specific config override enabled
by putting
$feature{'snapshot'}{'override'} = 1;
(or equivalent) in $GITWEB_CONFIG, and when viewing toplevel gitweb
page, which means the projects list page (to be more exact this
happens for any project-less action), gitweb would put the following
Perl warnings in error log:
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2065.
fatal: error processing config file(s)
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2221.
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2218.
The problem is in the following fragment of code:
# path to the current git repository
our $git_dir;
$git_dir = "$projectroot/$project" if $project;
# list of supported snapshot formats
our @snapshot_fmts = gitweb_get_feature('snapshot');
@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
For the toplevel gitweb page, which is the list of projects, $project is not
defined, therefore neither is $git_dir. gitweb_get_feature() subroutine
calls git_get_project_config() if project specific override is turned
on... but we don't have project here.
Those errors mentioned above occur in the following fragment of code in
git_get_project_config():
# get config
if (!defined $config_file ||
$config_file ne "$git_dir/config") {
%config = git_parse_project_config('gitweb');
$config_file = "$git_dir/config";
}
git_parse_project_config() calls git_cmd() which has '--git-dir='.$git_dir
There are (at least) three possible solutions:
1. Harden gitweb_get_feature() so that it doesn't call
git_get_project_config() if $project (and therefore $git_dir) is not
defined; there is no project for project specific config.
2. Harden git_get_project_config() like you did in your fix, returning early
if $git_dir is not defined.
3. Harden git_cmd() so that it doesn't add "--git-dir=$git_dir" if $git_dir
is not defined, and change git_get_project_config() so that it doesn't
even try to access $git_dir if it is not defined.
This commit implements both 1.) and 2.), i.e. gitweb_get_feature() doesn't
call project-specific override if $git_dir is not defined (if there is no
project), and git_get_project_config() returns early if $git_dir is not
defined.
Add a test for this bug to t/t9500-gitweb-standalone-no-errors.sh test.
Reported-by: Eli Barzilay <eli@barzilay.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Sun, 28 Feb 2010 22:19:09 +0000 (23:19 +0100)]
bisect: error out when passing bad path parameters
As reported by Mark Lodato, "git bisect", when it was started with
path parameters that match no commit was kind of working without
taking account of path parameters and was reporting something like:
Bisecting: -1 revisions left to test after this (roughly 0 steps)
It is more correct and safer to just error out in this case, before
displaying the revisions left, so this patch does just that.
Note that this bug is very old, it exists at least since v1.5.5.
And it is possible to detect that case earlier in the bisect
algorithm, but it is not clear that it would be an improvement to
error out earlier, on the contrary it may change the behavior of
"git rev-list --bisect-all" for example, which is currently correct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Lodato [Sat, 27 Feb 2010 04:57:48 +0000 (23:57 -0500)]
Remove reference to GREP_COLORS from documentation
There is no longer support for external grep, as per bbc09c2 (grep: rip
out support for external grep, 2010-01-12), so remove the reference to it
from the documentation.
Signed-off-by: Mark Lodato <lodatom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adam Simpkins [Sat, 27 Feb 2010 03:50:02 +0000 (19:50 -0800)]
prune: honor --expire=never
Previously, prune treated an expiration time of 0 to mean that no
expire argument was supplied, and everything should be pruned. As a
result, "prune --expire=never" would prune all unreachable objects,
regardless of their timestamp.
prune can be called with --expire=never automatically by gc, when the
gc.pruneExpire configuration is set to "never".
Signed-off-by: Adam Simpkins <simpkins@facebook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Lodato [Fri, 26 Feb 2010 03:40:11 +0000 (22:40 -0500)]
grep docs: use AsciiDoc literals consistently
The convention for this particular page is to use AsciiDoc literal
strings only for options (`-x` or `--long`), but not for definition list
terms and not for <meta-vars>.
Signed-off-by: Mark Lodato <lodatom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Filippo Negroni [Thu, 25 Feb 2010 10:01:31 +0000 (10:01 +0000)]
Fix gitmkdtemp: correct test for mktemp() return value
In gitmkdtemp, the return value of mktemp is not tested correctly.
mktemp() always returns its 'template' argument, even upon failure.
An error is signalled by making the template an empty string.
Signed-off-by: Filippo Negroni <fnegroni@flexerasoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than only clearing GIT_INDEX_FILE, take the list of environment
variables to clear from local_repo_env, appending the settings for
GIT_DIR and GIT_WORK_TREE.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Wed, 24 Feb 2010 23:34:17 +0000 (00:34 +0100)]
submodules: ensure clean environment when operating in a submodule
git-submodule used to take care of clearing GIT_DIR whenever it operated
on a submodule index or configuration, but forgot to unset GIT_WORK_TREE
or other repo-local variables. This would lead to failures e.g. when
GIT_WORK_TREE was set.
This only happened in very unusual contexts such as operating on the
main worktree from outside of it, but since "git-gui: set GIT_DIR and
GIT_WORK_TREE after setup" (a9fa11fe5bd5978bb) such failures could also
be provoked by invoking an external tool such as "git submodule update"
from the Git Gui in a standard setup.
Solve by using the newly introduced clear_local_git_env() shell function
to ensure that all repo-local environment variables are unset.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Wed, 24 Feb 2010 23:34:16 +0000 (00:34 +0100)]
shell setup: clear_local_git_env() function
Introduce an auxiliary function to clear all repo-local environment
variables. This should be invoked by any shell script that switches
repository during execution, to ensure that the environment is clean
and that things such as the git dir and worktree are set up correctly.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Wed, 24 Feb 2010 23:34:14 +0000 (00:34 +0100)]
Refactor list of of repo-local env vars
Move the list of GIT_* environment variables that are local to a
repository into a static list in environment.c, as it is also
useful elsewhere. Also add the missing GIT_CONFIG variable to the
list.
Make it easy to use the list both by NULL-termination and by size;
the latter (excluding the terminating NULL) is stored in the
local_repo_env_size define.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 24 Feb 2010 23:41:27 +0000 (15:41 -0800)]
pack-objects documentation: reword "objects that appear in the standard input"
These were written back when we always read objects from the standard
input. These days --revs and its friends can feed only the start and
end points and have the command internally enumerate the objects.
Junio C Hamano [Wed, 24 Feb 2010 19:02:05 +0000 (11:02 -0800)]
fetch --all/--multiple: keep all the fetched branch information
Since "git fetch" learned "--all" and "--multiple" options, it has become
tempting for users to say "git pull --all". Even though it may fetch from
remotes that do not need to be fetched from for merging with the current
branch, it is handy.
"git fetch" however clears the list of fetched branches every time it
contacts a different remote. Unless the current branch is configured to
merge with a branch from a remote that happens to be the last in the list
of remotes that are contacted, "git pull" that fetches from multiple
remotes will not be able to find the branch it should be merging with.
Make "fetch" clear FETCH_HEAD (unless --append is given) and then append
the list of branches fetched to it (even when --append is not given). That
way, "pull" will be able to find the data for the branch being merged in
FETCH_HEAD no matter where the remote appears in the list of remotes to be
contacted by "git fetch".
Reported-by: Michael Lukashov Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 24 Feb 2010 17:08:53 +0000 (12:08 -0500)]
push: fix segfault for odd config
If you have a branch.$X.merge config option, but no branch.$X.remote, and
your configuration tries to push tracking branches, git will segfault.
The problem is that even though branch->merge_nr is 1, you don't actually
have an upstream since there is no remote. Other callsites generally
check explicitly that branch->merge is not NULL, so let's do that here,
too.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 24 Feb 2010 18:22:05 +0000 (10:22 -0800)]
t5521: fix and modernize
All of these tests were bogus, as they created new directory and tried to
run "git pull" without even running "git init" in there. They were mucking
with the repository in $TEST_DIRECTORY.
While fixing it, modernize the style not to chdir around outside of
subshell. Otherwise a failed test will take us to an unexpected directory
and we need to chdir back to the test directory in each test, which is
ugly and error prone.
projects / git / log