rsa/rsa_ssl.c: make RSA_padding_check_SSLv23 constant-time.

Copy of RSA_padding_check_PKCS1_type_2 with a twist that rejects padding
if nul delimiter is preceded by 8 consecutive 0x03 bytes.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 603221407ddc6404f8c417c6beadebf84449074c)

Resolved conflicts:
crypto/rsa/rsa_ssl.c

(Merged from https://github.com/openssl/openssl/pull/7735)

rsa/rsa_oaep.c: remove memcpy calls from RSA_padding_check_PKCS1_OAEP.

And make RSAErr call unconditional.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 75f5e944be97f28867e7c489823c889d89d0bd06)

(Merged from https://github.com/openssl/openssl/pull/7735)

rsa/rsa_pk1.c: remove memcpy calls from RSA_padding_check_PKCS1_type_2.

And make RSAErr call unconditional.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e875b0cf2f10bf2adf73e0c2ec81428290f4660c)

(Merged from https://github.com/openssl/openssl/pull/7735)

rsa/rsa_ossl.c: make RSAerr call in rsa_ossl_private_decrypt unconditional.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 89072e0c2a483f2ad678e723e112712567b0ceb1)

(Merged from https://github.com/openssl/openssl/pull/7735)

err/err.c: add err_clear_last_constant_time.

Expected usage pattern is to unconditionally set error and then
wipe it if there was no actual error.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit f658a3b64d8750642f4975090740865f770c2a1b)

Resolved conflicts:
crypto/err/err.c

(Merged from https://github.com/openssl/openssl/pull/7735)

Make EVP_PKEY_asn1_add0() stricter about its input

It turns out that the strictness that was implemented in
EVP_PKEY_asn1_new() (see Github openssl/openssl#6880) was badly placed
for some usages, and that it's better to do this check only when the
method is getting registered.

Fixes #7758

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7847)

(cherry picked from commit a86003162138031137727147c9b642d99db434b1)

Have util/mktar.sh display the absolute path to the tarball

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7696)

(cherry picked from commit 3be389435fc7b94623d972b622dbd9f0cd5c34f7)

Make sure to run util/mktar.sh from the source directory

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7696)

(cherry picked from commit b741f153b2f24139d7210b1b0c9caf561f4900e8)

Don't export the submodules 'boringssl', 'krb5' and 'pyca-cryptography'

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7696)

(cherry picked from commit 76bc401cc63219a462224884cb4af787e17725ed)

Don't export util/mktar.sh

When creating a tarball, it's pointless to include scripts that assume
a git workspace.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7696)

(cherry picked from commit b9a694717902af796639e1dff641ba620703303b)

Document the removed 'dist' target

Also adds missing copyright boilerplate to util/mktar.sh

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7696)

(cherry picked from commit b42922ea2f605fd6c42faad1743fb27be5f7f1f3)

rsa/rsa_ossl.c: cache MONT_CTX for public modulus earlier.

Blinding is performed more efficiently and securely if MONT_CTX for public
modulus is available by the time blinding parameter are instantiated. So
make sure it's the case.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 2cc3f68cde77af23c61fbad65470602ee86f2575)

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7586)

Remove all 'make dist' artifacts

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7692)

(cherry picked from commit 8d9535ec3e317641b8e551973c8cfe2ee1c89296)

Change tarball making procedure

Since recently, OpenSSL tarballs are produced with 'make tar' rather
than 'make dist', as the latter has turned out to be more troublesome
than useful.

The next step to look at is why we would need to configure at all to
produce a Makefile just to produce a tarball.  After all, the tarball
should now only contain source files that are present even without
configuring.

Furthermore, the current method for producing tarballs is a bit
complex, and can be greatly simplified with the right tools.  Since we
have everything versioned with git, we might as well use the tool that
comes with it.

Added: util/mktar.sh, a simple script to produce OpenSSL tarballs.  It
takes the options --name to modify the prefix of the distribution, and
--tarfile tp modify the tarball file name specifically.

This also adds a few entries in .gitattributes to specify files that
should never end up in a distribution tarball.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7692)

(cherry picked from commit 8c209eeef426ded66ce99048f535f35d08b88462)

Prepare for 1.1.0k-dev

Reviewed-by: Richard Levitte <levitte@openssl.org>

Prepare for 1.1.0j release

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7670)

Update CHANGES and NEWS for new release

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7666)

Fix typo in util/perl/OpenSSL/Test.pm

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7633)

(cherry picked from commit 2dc37bc2b4c678462a24d2904604e58c0c5ac1cb)

test/recipes/90-test_shlibload.t needs $target{shared_extension}

We therefore must add defaults.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7631)

Fix rpath-related Linux "test_shlibload" failure.

When libssl and libcrypto are compiled on Linux with "-rpath", but
not "--enable-new-dtags", the RPATH takes precedence over
LD_LIBRARY_PATH, and we end up running with the wrong libraries.
This is resolved by using full (or at least relative, rather than
just the filename to be found on LD_LIBRARY_PATH) paths to the
shared objects.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7631)

Configuration: make sure the shared_sources table doesn't contain empty elements

Fixes #7634

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7635)

(cherry picked from commit 0c594ccc29f6ba241627f436ba3d05fc400d1066)

Windows build: build foo.d after foo.obj

We made the build of foo.obj depend on foo.d, meaning the latter gets
built first.  Unfortunately, the way the compiler works, we are forced
to redirect all output to foo.d, meaning that if the source contains
an error, the build fails without showing those errors.

We therefore remove the dependency and force the build of foo.d to
always happen after build of foo.obj.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7533)

[crypto/bn] swap BN_FLG_FIXED_TOP too

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7599)

(cherry picked from commit dd41956d80686638d74fd203bd67060f90966280)

Fix cherry-pick error

A couple of $(ECHO) sneaked in from patches in newer branches

Fixes #7600

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7601)

VMS build: colon after target must be separated with a space

... otherwise, it's taken to be part of a device name.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7602)

(cherry picked from commit e9994901f835420764d020968d4588fc09ec74c3)

Have install targets depend on more precise build targets

We only had the main 'install' target depend on 'all'.  This changes
the dependencies so targets like install_dev, install_runtime_libs,
install_engines and install_programs depend on build targets that are
correspond to them more specifically.  This increases the parallel
possibilities.

Fixes #7466

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7583)

(cherry picked from commit e8d01a608705e4320082a11a3870aa7e19c7290f)

Allow parallel install

When trying 'make -j{n} install', you may occasionally run into
trouble because to sub-targets (install_dev and install_runtime) try
to install the same shared libraries.  That makes parallel install
difficult.

This is solved by dividing install_runtime into two parts, one for
libraries and one for programs, and have install_dev depend on
install_runtime_libs instead of installing the shared runtime
libraries itself.

Fixes #7466

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7583)

(cherry picked from commit c1123d9f7efb005a109aeccaba82c40bf9bd4c1d)

Add a constant time flag to one of the bignums to avoid a timing leak.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7549)

(cherry picked from commit 00496b6423605391864fbbd1693f23631a1c5239)

Remove brace from bad cherry-pick of DSA reallocation fix

Commit 56fb454 backported the DSA reallocation fix to 1.1.0, however a
code block that has multiple statements in 1.1.1+ only has a `goto` in
1.1.0 so introduces a brace that causes a compile failure.

CLA:trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7516)

Timing vulnerability in ECDSA signature generation (CVE-2018-0735)

Preallocate an extra limb for some of the big numbers to avoid a reallocation
that can potentially provide a side channel.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7486)

(cherry picked from commit 99540ec79491f59ed8b46b4edf130e17dc907f52)

Timing vulnerability in DSA signature generation (CVE-2018-0734).

Avoid a timing attack that leaks information via a side channel that
triggers when a BN is resized.  Increasing the size of the BNs
prior to doing anything with them suppresses the attack.

Thanks due to Samuel Weiser for finding and locating this.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7486)

(cherry picked from commit a9cfb8c2aa7254a4aa6a1716909e3f8cb78049b6)

DSA mod inverse fix

There is a side channel attack against the division used to calculate one of
the modulo inverses in the DSA algorithm.  This change takes advantage of the
primality of the modulo and Fermat's little theorem to calculate the inverse
without leaking information.

Thanks to Samuel Weiser for finding and reporting this.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7487)

(cherry picked from commit 415c33563528667868c3c653a612e6fc8736fd79)

md_rand.c: don't stop polling until properly initialized

Previously, the RNG sets `initialized=1` after the first call to
RAND_poll(), although its criterion for being initialized actually
is whether condition `entropy >= ENTROPY_NEEDED` is true.

This commit now assigns `initialized=(entropy >= ENTROPY_NEEDED)`,
which has the effect that on the next call, RAND_poll() will be
called again, if it previously failed to obtain enough entropy.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7438)

arch/async_posix.h: improve portability.

{make|swap|get|set}context are removed in POSIX.1-2008, but glibc
apparently keeps providing it.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7420)

(cherry picked from commit 9d71a24ebf57e7157888af1ca587eafe914bf96f)

Apply self-imposed path length also to root CAs

Also, some readers of the code find starting the count at 1 for EE
cert confusing (since RFC5280 counts only non-self-issued intermediate
CAs, but we also counted the leaf).  Therefore, never count the EE
cert, and adjust the path length comparison accordinly.  This may
be more clear to the reader.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit dc5831da59e9bfad61ba425d886a0b06ac160cd6)

Only CA certificates can be self-issued

At the bottom of https://tools.ietf.org/html/rfc5280#page-12 and
top of https://tools.ietf.org/html/rfc5280#page-13 (last paragraph
of above https://tools.ietf.org/html/rfc5280#section-3.3), we see:

   This specification covers two classes of certificates: CA
   certificates and end entity certificates.  CA certificates may be
   further divided into three classes: cross-certificates, self-issued
   certificates, and self-signed certificates.  Cross-certificates are
   CA certificates in which the issuer and subject are different
   entities.  Cross-certificates describe a trust relationship between
   the two CAs.  Self-issued certificates are CA certificates in which
   the issuer and subject are the same entity.  Self-issued certificates
   are generated to support changes in policy or operations.  Self-
   signed certificates are self-issued certificates where the digital
   signature may be verified by the public key bound into the
   certificate.  Self-signed certificates are used to convey a public
   key for use to begin certification paths.  End entity certificates
   are issued to subjects that are not authorized to issue certificates.

that the term "self-issued" is only applicable to CAs, not end-entity
certificates.  In https://tools.ietf.org/html/rfc5280#section-4.2.1.9
the description of path length constraints says:

   The pathLenConstraint field is meaningful only if the cA boolean is
   asserted and the key usage extension, if present, asserts the
   keyCertSign bit (Section 4.2.1.3).  In this case, it gives the
   maximum number of non-self-issued intermediate certificates that may
   follow this certificate in a valid certification path.  (Note: The
   last certificate in the certification path is not an intermediate
   certificate, and is not included in this limit.  Usually, the last
   certificate is an end entity certificate, but it can be a CA
   certificate.)

This makes it clear that exclusion of self-issued certificates from
the path length count applies only to some *intermediate* CA
certificates.  A leaf certificate whether it has identical issuer
and subject or whether it is a CA or not is never part of the
intermediate certificate count.  The handling of all leaf certificates
must be the same, in the case of our code to post-increment the
path count by 1, so that we ultimately reach a non-self-issued
intermediate it will be the first one (not zeroth) in the chain
of intermediates.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit ed422a2d0196ada0f5c1b6e296f4a4e5ed69577f)

ssl/s3_enc.c: fix logical errors in ssl3_final_finish_mac.

(back-port of commit 7d0effeacbb50b12bfc24df7614d7cf5c8686f51)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7392)

apps: allow empty attribute values with -subj

Historically (i.e., OpenSSL 1.0.x), the openssl applications would
allow for empty subject attributes to be passed via the -subj argument,
e.g., `opensl req -subj '/CN=joe/O=/OU=local' ...`.  Commit
db4c08f0194d58c6192f0d8311bf3f20e251cf4f applied a badly needed rewrite
to the parse_name() helper function that parses these strings, but
in the process dropped a check that would skip attributes with no
associated value.  As a result, such strings are now treated as
hard errors and the operation fails.

Restore the check to skip empty attribute values and restore
the historical behavior.

Document the behavior for empty subject attribute values in the
corresponding applications' manual pages.

(cherry picked from commit 3d362f190306b62a17aa2fd475b2bc8b3faa8142)
(cherry picked from commit a7ee1ef61b1893038008691a4a6979cf2da91439)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7368)

Fix copy&paste error found in Coverity scan

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7377)

(cherry picked from commit 628ee796389b555ddb5fc28355e16e9417ab1724)

rsa/rsa_ossl.c: fix and extend commentary [skip ci].

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7123)

(cherry picked from commit d1c008f66bad435b18aa45aa59f72bed7c682849)

Clean out aliases in include/openssl/symhacks.h

Only a few clashing ones remain

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7331)

(cherry picked from commit b44882a0bd0717e0aab84f5dc3ef81ab673155e9)

Small cleanup (util/mkdef.pl, crypto/bio/bss_log.c, include/openssl/ocsp.h)

BIO_s_log() is declared for everyone, so should return NULL when not
actually implemented.  Also, it had explicit platform limitations in
util/mkdef.pl that didn't correspond to what was actually in code.
While at it, a few other hard coded things that have lost their
relevance were removed.

include/openssl/ocsp.h had a few duplicate declarations.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7331)

(cherry picked from commit 7e09c5eaa57295f87453286ffe25277c2f2bc73f)

Implement coordinate blinding for EC_POINT

This commit implements coordinate blinding, i.e., it randomizes the
representative of an elliptic curve point in its equivalence class, for
prime curves implemented through EC_GFp_simple_method,
EC_GFp_mont_method, and EC_GFp_nist_method.

This commit is derived from the patch
https://marc.info/?l=openssl-dev&m=131194808413635 by Billy Brumley.

Coordinate blinding is a generally useful side-channel countermeasure
and is (mostly) free. The function itself takes a few field
multiplicationss, but is usually only necessary at the beginning of a
scalar multiplication (as implemented in the patch). When used this way,
it makes the values that variables take (i.e., field elements in an
algorithm state) unpredictable.

For instance, this mitigates chosen EC point side-channel attacks for
settings such as ECDH and EC private key decryption, for the
aforementioned curves.

For EC_METHODs using different coordinate representations this commit
does nothing, but the corresponding coordinate blinding function can be
easily added in the future to extend these changes to such curves.

Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6526)

[test] ECC: make sure negative tests pass for the right reasons

This is a backport of #7028 to 1.1.0.

It squashes the two original commits and applies changes for
compatibility with 1.1.0.

1. cherry picked from commit 30c41bfb158c0f595809d0eaf032926a3c2cf236
    [test] ECC: make sure negative tests pass for the right reasons
2. cherry picked from commit bfb10b975818d1887d676d309fcc21a765611f6d
    [test] throw error from wrapper function instead of an EC_METHOD specific one

Given that in 1.1.0 `EC_POINT_get_affine_coordinates_GFp` and
`EC_POINT_get_affine_coordinates_GF2m` have not been unified, in this
backport the tests distinguish between the 2 different functions as the
cause of the expected error.

[extended tests] to trigger sanitizer checks and coverage analysis.

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7152)

More EVP ECC testing: positive and negative

This is a backport of #6608 to 1.1.0.

1. For every named curve, two "golden" keypair positive tests.
2. Also two "golden" stock ECDH positive tests.
3. For named curves with non-trivial cofactors, additionally two "golden"
   ECC CDH positive tests.
4. For named curves with non-trivial cofactors, additionally two negative
   tests.

There is some overlap with existing EVP tests, especially for the NIST
curves (for example, positive testing ECC CDH KATs for NIST curves).

"Golden" here means all the values are independent from OpenSSL's ECC
code. I used sage to calculate them. What comes from OpenSSL is:

1. The OIDs (parsed by tooling)
2. The curve parameters (parsing ecparam output with tooling)

The values inside the PEMs (private keys, public keys) and shared keys
are from sage. The PEMs themselves are the output of asn1parse, with
input taken from sage.

(cherry picked from commit 249330de0250bc598d20d383bab37d150cdad239)

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7152)

Move evp test programs input data to its own data dir

This is a manual backport of #3472 to 1.1.0.
This is a partial backport, limited only to evptests, as #3472 also
affected bntests, which has a completely different form in 1.1.0.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7152)

Split test/evptests.txt into separate files.

This is a manual port of #3443 (and the related bugfix PR #3452) to
1.1.0.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7152)

Document OPENSSL_VERSION_TEXT macro

This commit documents the OPENSSL_VERSION_TEXT which is currently
missing in the man page.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7301)

(cherry picked from commit 7c69495712e3dc9aa8db38271f0c3faeb2037165)

Use secure_getenv(3) when available.

Change all calls to getenv() inside libcrypto to use a new wrapper function
that use secure_getenv() if available and an issetugid then getenv if not.

CPU processor override flags are unchanged.

Extra checks for OPENSSL_issetugid() have been removed in favour of the
safe getenv.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7047)

(cherry picked from commit 5c39a55d04ea6e6f734b627a050b9e702788d50d)

crypto/bn/asm/x86_64-gcc.c: remove unnecessary redefinition of BN_ULONG

This module includes bn.h via other headers, so it picks up the
definition from there and doesn't need to define them locally (any
more?).  Worst case scenario, the redefinition may be different and
cause all sorts of compile errors.

Fixes #7227

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7287)

(cherry picked from commit dda5396aaec315bdbcb080e42fb5cd0191f2ad72)

crypto/ui/ui_openssl.c: make sure to recognise ENXIO and EIO too

These both indicate that the file descriptor we're trying to use as a
terminal isn't, in fact, a terminal.

Fixes #7271

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7272)

(cherry picked from commit 276bf8620ce35a613c856f2b70348f65ffe94067)

Use 'i' as parameter name not 'I'.

The latter causes problems when complex.h is #included.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7233)

(cherry picked from commit 972f67889b5a10c33dbc3d500cfa65b544e68b46)

Add a compile time test to verify that openssl/rsa.h and complex.h can
coexist.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7233)

(cherry picked from commit da5fac72b1cba5651b871902eea234e693cf01e5)

Add an explicit cast to time_t

Caused a compilation failure in some environments

Fixes #7204

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7205)

(cherry picked from commit bc278f30f0b766bfb82426c641dc1d51ace4a994)

minor fixes for Windows

- fix to use secure URL in generated Windows resources
- fix a potentially uninitialized variable

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7189)

Make the config script fail with an error code if Configure failed

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7166)

Fix typos in documentation.

CLA: trivial

(cherry picked from commit fa332bba919d094c1654bbb3be0528b3df6e9023)

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7040)

CAPI engine: add support for RSA_NO_PADDING

Since the SSL code started using RSA_NO_PADDING, the CAPI engine became
unusable.  This change fixes that.

Fixes #7131

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7174)

(cherry picked from commit 37f4928701aa54937ce8eef422a2165afeec5cec)

Check the return value from ASN1_INTEGER_set

Found by Coverity

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7169)

(cherry picked from commit 512d811719fc955f574090af4c3586a9aba46fa7)

RSA padding Zeroization fixes

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7090)

(cherry picked from commit 82eba370daeb6d80b01b521d9e2963451487f0cb)

Harmonize the error handling codepath

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7121)

Fix segfault in RSA_free() (and DSA/DH/EC_KEY)

`RSA_free()` and friends are called in case of error from
`RSA_new_method(ENGINE *e)` (or the respective equivalent functions).

For the rest of the description I'll talk about `RSA_*`, but the same
applies for the equivalent `DSA_free()`, `DH_free()`, `EC_KEY_free()`.

If `RSA_new_method()` fails because the engine does not implement the
required method, when `RSA_free(RSA *r)` is called,
`r->meth == NULL` and a segfault happens while checking if
`r->meth->finish` is defined.

This commit fixes this issue by ensuring that `r->meth` is not NULL
before dereferencing it to check for `r->meth->finish`.

Fixes #7102 .

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7121)

Key zeroization fix for EVP_SealInit.

Manual backport from master.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7116)

New openssl subject parser hard to debug

-subj 'subject=C = US, ST = A, L = root, O = Hewlett Packard Enterprise Company, OU = Remote Device Access, CN = Hewlett Packard Enterprise Remote Device Access Test Local CA, emailAddress = rda@hpe.com'
was a valid subject in openssl 1.0. Error received in 1.1 is:

problems making Certificate Request

Not very informative, I only figured this out because I compiled the
code and added logging.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7098)

(cherry picked from commit 2167640b0bf76ec50a397dd90444b97c242e3f04)

Make OBJ_NAME case insensitive.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7101)

hkdf zeroization fix

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7106)

(cherry picked from commit 64ed55ab033f1bfa795d46f0ecc61c313204b418)

key zeroisation fix for p12

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7109)

(cherry picked from commit f5cee414fa8e7e9a088d8d5ebe641f368df20801)

key zeroisation for pvkfmt now done on all branch paths

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7107)

(cherry picked from commit 0239283d99a37e8527199a62100fec867b9996cb)

openssl req: don't try to report bits

With the introduction of -pkeyopt, the number of bits may change
without |newkey| being updated.  Unfortunately, there is no API to
retrieve the information from a EVP_PKEY_CTX either, so chances are
that we report incorrect information.  For the moment, it's better not
to try to report the number of bits at all.

Fixes #7086

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7096)

(cherry picked from commit 17147181bd3f97c53592e2a5c9319b854b954039)

Clarify the EVP_DigestSignInit docs

They did not make it clear how the memory management works for the |pctx|
parameter.

Fixes #7037

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7042)

(cherry picked from commit f097e8759820f6f9b78adb99eb4bfced2945d623)

Fix example in crl(1) man page

The default input format is PEM, so explicit "-inform DER" is needed to
read DER-encoded CRL.

CLA: trivial

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7094)

(cherry picked from commit 785e614a95a134831f213749332bcf40c4920f69)

The req documentation incorrectly states that we default to md5

Just remove that statement. It's not been true since 2005.

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/6905)

add docs for OCSP_resp_get0_signature

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7082)

add getter for tbsResponseData and signatureAlgorithm on OCSP_BASICRESP

fixes #7081

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7082)

Check the return from BN_sub() in BN_X931_generate_Xpq().

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7088)

(cherry picked from commit 6bcfcf16bf6aef4f9ec267d8b86ae1bffd8deab9)

Remove redundant ASN1_INTEGER_set call

This trivial patch removes a duplicated call to ASN1_INTEGER_set.

Fixes Issue #6977

Signed-off-by: Eric Brown <browne@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6984)

(cherry picked from commit 59701e6363531cddef5b2114c0127b8453deb1f3)

Backport #7007 to 1.1.0

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7052)

Free SSL object on an error path

Thanks to @fangang190 for reporting this

Fixes #7061

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7065)

bn/bn_lib.c: conceal even memmory access pattern in bn2binpad.

(cherry picked from commit 324b95605225410763fe63f7cff36eb46ca54ee9)

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6940)

bn/bn_blind.c: use Montgomery multiplication when possible.

(cherry picked from commit e02c519cd32a55e6ad39a0cfbeeda775f9115f28)

Resolved conflicts:
crypto/bn/bn_blind.c

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6940)

rsa/rsa_ossl.c: implement variant of "Smooth CRT-RSA."

In [most common] case of p and q being of same width, it's possible to
replace CRT modulo operations with Montgomery reductions. And those are
even fixed-length Montgomery reductions...

(cherry picked from commit 41bfd5e7c8ac3a0874a94e4d15c006ad5eb48e59)

Resolved conflicts:
crypto/rsa/rsa_ossl.c

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6940)

crypto/bn: add more fixed-top routines.

Add bn_mul_fixed_top, bn_from_mont_fixed_top, bn_mod_sub_fixed_top.
Switch to bn_{mul|sqr}_fixed_top in bn_mul_mont_fixed_top and remove
memset in bn_from_montgomery_word.

(cherry picked from commit fcc4ee09473cac511eca90faa003661c7786e4f9)

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6940)

Backport #6648 to OpenSSL_1_1_0-stable

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7015)

Zero memory in CRYPTO_secure_malloc.

This commit destroys the free list pointers which would otherwise be
present in the returned memory blocks.  This in turn helps prevent
information leakage from the secure memory area.

Note: CRYPTO_secure_malloc is not guaranteed to return zeroed memory:
before the secure memory system is initialised or if it isn't implemented.

[manual merge of #7011]

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7026)

crypto/init.c: improve destructor_key's portability.

It was assumed that CRYPTO_THREAD_LOCAL is universally scalar type,
which doesn't appear to hold true.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6976)

(cherry picked from commit 0b1319ba94c85af9e87308e0d573d1260a802f53)

Fix a warning from MSVC build

Apparently after internal/numbers.h defines INTx_MIN/MAX
stdint gets included and it defines those differently:

C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\INCLUDE\stdint.h(48):
 warning C4005: 'INT8_MIN': macro redefinition

Avoid that by changing the sequence in which the include files
appear in crypto/bio/b_print.c.

[extended tests]

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6995)

Avoid shadowing 'free' in X509_LOOKUP_met_set_free

gcc 4.6 (arguably erroneously) warns about our use of 'free' as
the name of a function parameter, when --strict-warnings is enabled:

crypto/x509/x509_meth.c: In function 'X509_LOOKUP_meth_set_free':
crypto/x509/x509_meth.c:61:12: error: declaration of 'free' shadows a global declaration [-Werror=shadow]
cc1: all warnings being treated as errors
make[1]: *** [crypto/x509/x509_meth.o] Error 1

(gcc 4.8 is fine with this code, as are newer compilers.)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6991)

(cherry picked from commit 50f3994b513ead4da94845bf38222bb71c440fb3)

Prepare for 1.1.0j-dev

Reviewed-by: Richard Levitte <levitte@openssl.org>

Prepare for 1.1.0i release

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6954)

Updates to CHANGES and NEWS for the new release

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6950)

crypto/o_fopen.c: alias fopen to fopen64.

Originally fopen(3) was called from bio/bss_file.c, which performed the
aliasing. Then fopen(3) was moved to o_fopen.c, while "magic" definition
was left behind. It's still useful on 32-bit platforms, so pull it to
o_fopen.c.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6596)

(cherry picked from commit 2369111fd94ebc9b7d37e68f3ea9629f2fe5fa2e)

i2d_ASN1_OBJECT(): allocate memory if the user didn't provide a buffer

Since 0.9.7, all i2d_ functions were documented to allocate an output
buffer if the user didn't provide one, under these conditions (from
the 1.0.2 documentation):

    For OpenSSL 0.9.7 and later if B<*out> is B<NULL> memory will be
    allocated for a buffer and the encoded data written to it. In this
    case B<*out> is not incremented and it points to the start of the
    data just written.

i2d_ASN1_OBJECT was found not to do this, and would crash if a NULL
output buffer was provided.

Fixes #6914

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6918)

(cherry picked from commit cba024dc685d13dbcbd0577bed028ee6b295b56a)

x509v3/v3_purp.c: re-implement lock-free check for extensions cache validity.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6891)

(back-ported from commit f21b5b64cbbc279ef31389e6ae312690575187da)

x509v3/v3_purp.c: resolve Thread Sanitizer nit.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6891)

(cherry picked from commit 0da7358b0757fa35f2c3a8f51fa036466ae50fd7)

Increase CT_NUMBER values

Also add build-time errors to keep them in sync.
Thanks to GitHub user YuDudysheva for reporting this.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6874)
(cherry picked from commit b5ee517794cf546dc7e3d5a82b400955a7381053)

Fix setting of ssl_strings_inited.

Thanks to GitHub user zsergey105 for reporting this.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6875)
(cherry picked from commit 10281e83eac0fb96de3f14855154197aa33bb800)

Check early that the config target exists and isn't a template

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6885)

(cherry picked from commit 4e360445473c3da938703a8142a36cf6ee86a191)

Make EVP_PKEY_asn1_new() stricter with its input

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6880)

(cherry picked from commit 38eca7fed09a57c1b7a05d651af2c667b3e87719)