WLAN (SDIO) firmware version: W15.68.19.17
Bluetooth (SDIO) firmware version: 15.26.19.17
The combo image can be downloaded through either WLAN or
Bluetooth.
WLAN (SDIO) firmware version: V15.68.7.p154
Bluetooth (SDIO) firmware version: V15.68.7.p154
The combo image can be downloaded through either WLAN or
Bluetooth.
'V' flag indicate the firmware image includes the fix for WPA2
vulnerability issue.
PCIe/USB-8897:
WLAN (PCIe) firmware version: V15.68.7.p154
Bluetooth (USB) firmware version: 15.28.7.p154
The combo image will be downloaded through WLAN only.
'V' flag indicate the firmware image fix the WPA2
vulnerability issue.
PCIe/USB-8997:
WLAN (PCIe) firmware version: V16.68.1.p145
Bluetooth (USB) firmware version: 16.26.1.p145
The combo image will be downloaded through WLAN only.
'V' flag indicate the firmware image fix the WPA2
vulnerability issue.
Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: James Cao <jcao@marvell.com>
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.7.p119
Bluetooth (USB) firmware version: 15.28.7.p119
The combo image will be downloaded through WLAN only.
Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p112
Bluetooth (SDIO) firmware version: 15.68.7.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
WLAN (SDIO) firmware version: 15.68.7.p87
Bluetooth (SDIO) firmware version: 15.68.7.p87
The combo image can be downloaded through either WLAN or
Bluetooth.
Amitkumar Karwar [Mon, 23 May 2016 06:40:04 +0000 (12:10 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to 7.p77
SD8897:
WLAN (SDIO) firmware version: 15.68.7.p77
Bluetooth (SDIO) firmware version: 15.68.7.p77
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.7.p77
Bluetooth (USB) firmware version: 15.68.7.p77
The combo image will be downloaded through WLAN only.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com>
linux-firmware: update Marvell 8897-B0 firmware images to 7.p66
SD8897:
WLAN (SDIO) firmware version: 15.68.7.p66
Bluetooth (SDIO) firmware version: 15.68.7.p66
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.7.p66
Bluetooth (USB) firmware version: 15.68.7.p66
The combo image will be downloaded through WLAN only.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
linux-firmware: update Marvell 8897-B0 firmware images to 7.p53
SD8897:
WLAN (SDIO) firmware version: 15.68.7.p53
Bluetooth (SDIO) firmware version: 15.68.7.p53
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.7.p53
Bluetooth (USB) firmware version: 15.68.7.p53
The combo image will be downloaded through WLAN only.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
linux-firmware: update Marvell 8897-B0 firmware images to 7.p18
SD8897:
WLAN (SDIO) firmware version: 15.68.7.p18
Bluetooth (SDIO) firmware version: 15.68.7.p18
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.7.p18
Bluetooth (USB) firmware version: 15.68.7.p18
The combo image will be downloaded through WLAN only.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Avinash Patil [Tue, 27 Jan 2015 10:32:53 +0000 (16:02 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to p112
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p112
Bluetooth (SDIO) firmware version: 15.28.4.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p112
Bluetooth (USB) firmware version: 15.28.4.p112
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Avinash Patil [Wed, 17 Dec 2014 12:12:07 +0000 (17:42 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to p106
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p106
Bluetooth (SDIO) firmware version: 15.28.4.p106
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p106
Bluetooth (USB) firmware version: 15.28.4.p106
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p5
Bluetooth (SDIO) firmware version: 15.29.7.p5
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
linux-firmware: update Marvell 8897-B0 firmware images to p103
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p103
Bluetooth (SDIO) firmware version: 15.28.4.p103
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p103
Bluetooth (USB) firmware version: 15.28.4.p103
The combo image will be downloaded through WLAN only.
USB8897:
WLAN (USB) firmware version: 15.68.4.p103
Bluetooth (USB) firmware version: 15.28.4.p103
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Bing Zhao [Tue, 27 May 2014 21:37:20 +0000 (14:37 -0700)]
linux-firmware: update Marvell 8897-B0 firmware images to p73
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p73
Bluetooth (SDIO) firmware version: 15.28.4.p73
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p73
Bluetooth (USB) firmware version: 15.28.4.p73
The combo image will be downloaded through WLAN only.
USB8897:
WLAN (USB) firmware version: 15.68.4.p73
Bluetooth (USB) firmware version: 15.28.4.p73
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Arik Nemtsov [Mon, 10 Feb 2014 09:02:23 +0000 (11:02 +0200)]
wl18xx: add version 3 of the wl18xx firmware
There are new APIs in the latest version of the wl18xx firmware. Add
the new firmware with a new filename (wl18xx-fw-3.bin), which
corresponds to firmware revision 8.8.0.0.13.
Larry Finger [Tue, 28 Jan 2014 21:30:43 +0000 (15:30 -0600)]
rtlwifi: Add firmware for rtl8192ee
This firmware is for a driver for the Realtek RTL8192EE PCI WIFI device.
It came from a tarball from Realtek named
rtl_92ce_92se_92de_8723ae_88ee_8723be_92ee_linux_mac80211_0017.1224.2013.tar.gz
and is allowed to be distributed under the LICENCE.rtlwifi_firmware.txt license.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Yuval Mintz [Tue, 28 Jan 2014 14:57:41 +0000 (16:57 +0200)]
bnx2x: Update to FW 7.8.19
This new firmware fixes several bugs:
1. HW attention appears and traffic stops when iSCSI firmware tries to
retransmit iSCSI login command when the iSCSI login is carrying data
not aligned to 4-bytes.
2. FCoE traffic fails to run when running in switch-independent multi-function
mode and there's more than one interface supporting FCoE on a given port.
3. While two ports are running FCoE with at least one of them has a function
number (>1) on the same engine in a 4-port device a zeroed CQE is given,
causing FCoE traffic to stop.
This firmware is for a driver for the Realtek 8821AE PCI WIFI device.
It came from a tarball from Realtek named
wifi_driver_8821ae_0018.1129.2013.tar.gz and is allowed to be
distributed under the LICENCE.rtlwifi_firmware.txt license.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
[bwh: Fix filename in WHENCE] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Larry Finger [Fri, 3 Jan 2014 00:42:09 +0000 (18:42 -0600)]
rtlwifi: Add firmware for r8723au
This firmware is for a driver that will soon be submitted to the kernel.
It occurs as data statements in Realtek driver rtl8723A_WiFi_linux_v4.1.3_6044.20121224.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Ben Hutchings [Sun, 19 Jan 2014 23:30:21 +0000 (23:30 +0000)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/egrumbach/linux-firmware
Emmanuel Grumbach says:
This is another pull request for another firmware. I am sorry not to
have put this together in the same pull request, but I just didn't know
when that new firmware would come out.
It doesn't replace the older one:
* iwlwifi-{7260,3160}-7.ucode is supported starting from 3.10
* iwlwifi-{7260,3160}-8.ucode is supported starting from 3.13
Tedd Ho-Jeong An [Thu, 14 Nov 2013 01:21:23 +0000 (17:21 -0800)]
linux-firmware: Update Intel Bluetooth devices firmware patch files
This patch updates firmware patch files for following Intel Bluetooth devices:
- Intel Wireless Bluetooth 7260
- Intel Wireless Bluetooth 3160
This patch fixes
- sometimes device doesn't response to HCI_reset after multiple reboot
- issue with HCI stress testing
- issue with some multi profile cases
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Solomon Peachy [Wed, 13 Nov 2013 01:36:25 +0000 (20:36 -0500)]
firmware: cw1200: Add firmware for the ST-E CW1200 WLAN chipset.
This firmware file supports rev 2.2 of the CW1100/CW1200 family.
Signed-off-by: Jean Philippe PERRIN <j.p.perrin@st.com> Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Ben Hutchings [Wed, 11 Dec 2013 05:10:59 +0000 (05:10 +0000)]
emi62: Provide the correct bitstream
Commit b8e24bfabb03 ('emi62: use request_firmware()') made
emi62/bitstream.HEX a copy of emi26/bitstream.HEX. Re-do the
conversion from drivers/usb/misc/emi62_fw_{m,s}.h (these headers
contained the same bitstream but different firmware).
Larry Finger [Tue, 8 Oct 2013 23:28:25 +0000 (18:28 -0500)]
rtlwifi: Add new firmware files for rtl8188eu
The vendor driver RTL8188EUS_linux_v4.1.4_6773.20130222 contains
firmware in the form of data statements. This info has been extracted
into a binary file.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Larry Finger [Tue, 8 Oct 2013 23:27:23 +0000 (18:27 -0500)]
rtlwifi: Add new firmware files for rtl8192cu
The vendor driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404
includes new firmware files. These were extracted from data statements
in that driver to form these files.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
brcm: rename firmware names expressing host interface type
The firmware name used in brcmfmac for SDIO devices was named
generically as brcmfmac-sdio.bin. To use the brcmfmac SDIO driver
the user had to copy the appropriate firmware to brcmfmac-sdio.bin.
This turned out to be inconvenient for developers switching different
devices on their system so brcmfmac was changed to use chip specific
filenames according format brcmfmac<chipid>-sdio.bin. This patch renames
the existing SDIO firmware files to match this format.
Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
cw1200: Add SDD file for the Sagrad SG901-1091/1098 WLAN modules.
Sagrad has granted permission to redistribute this file, which contains
calibration and initialization tables for for their WLAN modules.
Please note that the cw1200 driver still requires firmware files, which
are separately licensed by ST-E. When (if?) explicit permission is
obtained to redistribute the firmware, it will be added.
Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: Adam Harriman <adam@sagrad.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Andrew Lunn [Thu, 5 Sep 2013 11:12:15 +0000 (13:12 +0200)]
moxa: Fix firmware file names.
Too many decimal to hex converstions of the USB product ID resulted in
the firmware files having the wrong name. Rename them, and update the
WHENCE file with the new names.
Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[bwh: Include version in WHENCE and GPG signatures as separate files] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Ben Hutchings [Thu, 30 May 2013 00:09:09 +0000 (01:09 +0100)]
Merge branch 'go7007' of git://linuxtv.org/hverkuil/linux-firmware
Hans Verkuil says:
The go7007 staging driver has been substantially overhauled for kernel 3.10.
As part of that process the firmware situation has been improved as well.
While Micronas allowed the firmware to be redistributed, it was never made
part of linux-firmware. Only the firmwares for the Sensoray S2250 were added
in the past, but those need the go7007*.bin firmwares as well to work.
This pull request collects all the firmwares necessary to support all the
go7007 devices into the go7007 directory. With this change the go7007 driver
will work out-of-the-box starting with kernel 3.10.
Kevin Cernekee [Fri, 24 May 2013 07:53:10 +0000 (00:53 -0700)]
rp2: Initial commit of Comtrol RocketPort 2 microcode
This is used by drivers/tty/serial/rp2.c.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Grant Edwards <grant.edwards@comtrol.com> Signed-off-by: Nick Thompson <nick.thompson@comtrol.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
projects / linux-firmware / log