Tom Finegan [Thu, 17 Sep 2015 23:21:22 +0000 (16:21 -0700)]
iosbuild: Add --test-link argument.
Shortcut arg for --extra-configure-args --enable-examples. Enables
the examples, and thus ensures that all versions of libvpx that
iosbuild.sh produces can actually be linked.
James Zern [Thu, 17 Sep 2015 00:33:34 +0000 (17:33 -0700)]
vpx_subpixel_8t_ssse3: fix reg counts/access
fixes build on windows x64; previously 'heightq' i.e., the 64-bit register
was accessed when only the 32-bit value was needed. given this is from a
stack variable the upper bits were undefined.
+ bump register/xmm counts; users of SETUP_LOCAL_VARS touch xmm13 in
64-bit builds and filter_block1d16_v* uses one extra temp variable
vp10: do sub8x8 block reconstruction in full subblocks.
This means that we don't reconstruct in 4x4 dimensions, but in
blocksize dimensions, e.g. 4x8 or 8x4. This may in some cases lead
to performance improvements. Also, if we decide to re-introduce
scalable coding support, this would fix the fact that you need to
re-scale the MV halfway the block in sub8x8 non-4x4 blocks.
This has virtually no effect on coding efficiency, but it is more
logical from a theoretical perspective (since it makes no sense to
me that you would exclude a MV from a list just because it's sign-
inversed value is identical to a value already in a list), and it
also makes the code simpler (it removes a duplicate value check in
cases where signbias is equal between the two MVs being compared).
vp10: code sign bit before absolute value in non-arithcoded header.
For reading, this makes the operation branchless, although it still
requires two shifts. For writing, this makes the operation as fast
as writing an unsigned value, branchlessly. This is also how other
codecs typically code signed, non-arithcoded bitstream elements.
vp10: don't reset contextual skip flag if block has no coefficients.
The implicitly changed value would be used for contextualizing future
skip flags of neighbour blocks (bottom/right), which is certainly not
what was intended. The original code stems from vp8, and was useful
in cases where coding of the skip flag was disabled. In vp9, the skip
flag is always coded. The result of this change is that for bitstream
parsing purposes, decoding of the skip flag becomes independent of
decoding of block coefficients.
VP9 dynamic resizing unit test with bitrate change.
Verify the dynamic resizer behavior for real time, 1 pass CBR mode.
Start at low target bitrate, raise the bitrate in the middle of the
clip, verify that scaling-up does occur after bitrate changed.
Verify the dynamic resizer behavior for real time, 1 pass CBR mode.
Run at low bitrate, with resize_allowed = 1, and verify that we get
one resize down event.
Marco [Tue, 8 Sep 2015 15:47:42 +0000 (08:47 -0700)]
Add cyclic refresh parameters to svc-layer context.
For 1 pass CBR spatial-SVC:
Add cyclic refresh parameters to the svc-layer context.
This allows cyclic refresh (aq-mode=3) to be applied to
the whole super-frame (all spatial layers).
This gives a performance improvement for spatial layer encoding.
Addd the aq_mode mode on/off setting as command line option.
The counts didn't take usehp into account, which means that if the
scope of the refmv is too large for the hp bit to be coded, the value
(always 1) is still included in the stats. Therefore, the final
counts will not reflect the entropy of the coded bits, but rather the
entropy of the combination of coded bits and the implied value (which
is always 1). Fix that by only including counts if the hp bit is
actually coded.
Marco [Mon, 14 Sep 2015 17:13:33 +0000 (10:13 -0700)]
For 1 pass: always use the normative filter in vp9_scale_if_required()
The normative (convolve8) filter is optimized/faster than
the nonnormative one. Pass usage of scaler (normative/nonomorative)
to vp9_scale_if_required(), and always use normative one for 1 pass.
Changes from upstream since last update: 4763662 mkvparser: fix type warnings 267f71c mkvparser: SafeArrayAlloc fix type warning f1a99d5 mkvparser: s/LONG_LONG_MAX/LLONG_MAX/ for compatibility bff1aa5 mkvparser: add msvc compatibility for isnan/isinf
vp10: merge frame_parallel_decoding_mode and refresh_frame_context.
See issue 1030. The value of frame_parallel_decoding_mode was ignored
in vp9 if refresh_frame_context was 0, so instead make it a 3-member
enum where the dependency is obviously stated.
In vp9, [0] and [1] had identical meaning, so merge them into a
single value. Make it impossible to code RESET_FRAME_CONTEXT_NONE
for intra_only frames, since that is a non-sensical combination.
Jingning Han [Thu, 10 Sep 2015 19:24:06 +0000 (12:24 -0700)]
Remove speed features in vp10
Take out speed features that affect the compression performance
to simplify the coding route. This commit removes the motion field
mode search used in speed 3.
Jingning Han [Wed, 9 Sep 2015 19:29:57 +0000 (12:29 -0700)]
Fix ioc warnings related to sub8x8 reference frame
Access scaled reference frame in the sub8x8 rate-distortion
optimization loop only when the current test mode is an inter mode.
This prevents an ioc warning triggered by sending intra_frame index
to fetch scaled reference frame.
Marco [Wed, 9 Sep 2015 00:05:31 +0000 (17:05 -0700)]
SVC sample encoder: Change some settings/update.
Change settings for 1 pass CBR.
And only use SET_SVC control(s) if there is at least 1 layer (spatial or temporal).
This allows sample encoder to also work for 1 layer case.
Jingning Han [Sun, 6 Sep 2015 01:28:16 +0000 (18:28 -0700)]
Fix the sub8x8 block inter prediction with scaled reference frame
Sync the encoder's buffer offset calculation for sub8x8 block motion
compensated prediction with scaled reference frame to match the
decoder's behavior. This resolves an enc/dec mismatch issue when
sub8x8 inter mode with scaled is turned on.
Don't reset sign_bias fields in vp10_setup_past_independence().
The fields are always coded in the frame itself, so there is never any
dependency on past frames. In practice, this fixes sign_bias being
ignored when error_resilient_mode=1.
Scott LaVarnway [Wed, 2 Sep 2015 20:15:52 +0000 (13:15 -0700)]
VPX: subpixel_8t_ssse3 asm using x86inc
This is based on the original patch optimized for 32bit
platforms by Tamar/Ilya and now uses the x86inc style asm.
The assembly was also modified to support 64bit platforms.
Make update_map/temporal_update fields implicit for keyframes.
These frame types cannot make bitstream parsing depend on previous
frames, so the hypothetical combinations of e.g. keyframe=1 and
update_map=0 or keyframe=1 and temporal_update=1 are non-sensical.
Therefore, make it impossible to code such combinations in the vp10
bitstream header.
Marco [Thu, 3 Sep 2015 19:55:51 +0000 (12:55 -0700)]
Fix to dynamic resize mode under change_config().
If the encoder dynamic resize is triggered and change config()
is then called, it will reset the current (resized) codec width/height
back to the the config (unresized) width/height (which will then
prevent the resizing action from occurring in encoder_loop).
Avoid this by checking for a change in the config width/height
before resetting the cm->width/height.
projects / libvpx / log