Make hstore_plperl's build even more like plperl's
Combine the two places that set CPPFLAGS into one. Also, some settings
should be restricted to Windows only. More precisely, -Wno-comment is
a GCC-only option, but Windows in a makefile implies GCC at the moment.
Also, since -Wno-comment is more properly a preprocessor option, move it
to CPPFLAGS to simplify things a bit.
Move interpreter shared library detection to configure
For building PL/Perl, PL/Python, and PL/Tcl, we need a shared library of
libperl, libpython, and libtcl, respectively. Previously, this was
checked in the makefiles, skipping the PL build with a warning if no
shared library was available. Now this is checked in configure, with an
error if no shared library is available.
The previous situation arose because in the olden days, the configure
options --with-perl, --with-python, and --with-tcl controlled whether
frontend interfaces for those languages would be built. The procedural
languages were added later, and shared libraries were often not
available in the beginning. So it was decided skip the builds of the
procedural languages in those cases. The frontend interfaces have since
been removed from the tree, and shared libraries are now available most
of the time, so that setup makes much less sense now.
Also, the new setup allows contrib modules and pgxs users to rely on the
respective PLs being available based on configure flags.
Andrew Dunstan [Fri, 1 May 2015 19:36:44 +0000 (15:36 -0400)]
Make hstore_plperl's build more like plperl's
This involves moving perl's CORE library to the end of the include list,
and adding other compilation settings that plperl uses. This won't
completely fix the breakage currently being seen by gcc builds on
Windows, but it will let the build get further, and should be wholly
benign, if not beneficial, on *nix.
Robert Haas [Fri, 1 May 2015 13:37:10 +0000 (09:37 -0400)]
Deparse named arguments to use the new => operator instead of :=
Tom Lane pointed out that this wasn't done, and asked whether that was
intentional. Subsequent discussion was in favor of making the change,
so here we go.
Robert Haas [Fri, 1 May 2015 12:50:35 +0000 (08:50 -0400)]
Allow FDWs and custom scan providers to replace joins with scans.
Foreign data wrappers can use this capability for so-called "join
pushdown"; that is, instead of executing two separate foreign scans
and then joining the results locally, they can generate a path which
performs the join on the remote server and then is scanned locally.
This commit does not extend postgres_fdw to take advantage of this
capability; it just provides the infrastructure.
Custom scan providers can use this in a similar way. Previously,
it was only possible for a custom scan provider to scan a single
relation. Now, it can scan an entire join tree, provided of course
that it knows how to produce the same results that the join would
have produced if executed normally.
KaiGai Kohei, reviewed by Shigeru Hanada, Ashutosh Bapat, and me.
Andres Freund [Fri, 1 May 2015 09:36:14 +0000 (11:36 +0200)]
Fix unaligned memory access in xlog parsing due to replication origin patch.
ParseCommitRecord() accessed xl_xact_origin directly. But the chunks in
the commit record's data only have 4 byte alignment, whereas
xl_xact_origin's members require 8 byte alignment on some
platforms. Update comments to make not of that and copy the record to
stack local storage before reading.
With help from Stefan Kaltenbrunner in pinning down the buildfarm and
verifying the fix.
Fix pg_rewind regression failure after "fast promotion"
pg_rewind looks at the control file to determine the server's timeline. If
the standby performs a "fast promotion", the timeline ID in the control
file is not updated until the next checkpoint. The startup process requests
a checkpoint immediately after promotion, so this is unlikely to be an
issue in the real world, but the regression suite ran pg_rewind so quickly
after promotion that the checkpoint had not yet completed.
Fix up some loose ends for CURRENT_USER as RoleSpec
In commit 31eae6028eca4, some documents were not updated to show the new
capability; fix that. Also, the error message you get when CURRENT_USER
and SESSION_USER are used in a context that doesn't accept them could be
clearer about it being a problem only in those contexts; so add the
word "here".
Author: Kyotaro HORIGUCHI
His patch submission also included changes to GRANT/REVOKE, but those
seemed more controversial, so I left them out. We can reconsider these
changes later.
Robert Haas [Thu, 30 Apr 2015 19:02:14 +0000 (15:02 -0400)]
Create an infrastructure for parallel computation in PostgreSQL.
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
We need to create the pg_multixact/offsets file deleted by pg_upgrade
much earlier than we originally were: it was in TrimMultiXact(), which
runs after we exit recovery, but it actually needs to run earlier than
the first call to SetMultiXactIdLimit (before recovery), because that
routine already wants to read the first offset segment.
Per pg_upgrade trouble report from Jeff Janes.
While at it, silence a compiler warning about a pointless assert that an
unsigned variable was being tested non-negative. This was a signed
constant in Thomas Munro's patch which I changed to unsigned before
commit. Pointed out by Andres Freund.
Peter Eisentraut [Thu, 30 Apr 2015 00:34:22 +0000 (20:34 -0400)]
Fix parallel make risk with new check temp-install setup
The "check" target no longer needs to depend on "all", because it now
runs "install" directly, which in turn depends on "all". Doing both
will cause problems with parallel make, because two builds will run next
to each other.
Also remove the redirection of the temp-install output into a log file.
This was appropriate when this was done from within pg_regress, but now
it's just a regular make run, and especially with the above changes this
will now take the place of running the "all" target before the test
suites.
problem report by Jeff Janes, patch in part by Michael Paquier
Robert Haas [Wed, 29 Apr 2015 22:03:18 +0000 (18:03 -0400)]
Add <literal> markup, for consistency.
This file isn't entirely consistent about whether "on" and "off"
should be marked up with <literal>, but it doesn't make much sense
to be inconsistent within a single sentence.
Robert Haas [Wed, 29 Apr 2015 19:48:44 +0000 (15:48 -0400)]
Remove enum-related special cases for catalog scans.
When this code was written, catalog scans were normally performed using
SnapshotNow, making special handling necessary here. Now, however, all
catalog scans use MVCC snapshots, so we can change these cases to look
more like what we do for catalog scans elsewhere in the code.
Per discussion with Tom Lane and a reminder from Bruce Momjian.
Andrew Dunstan [Wed, 29 Apr 2015 17:49:24 +0000 (13:49 -0400)]
Enable transforms tests for python 2 on MSVC builds
Currently regression tests for python 3 are disabled on MSVC, and these
tests fail with python 3, too, so we have some work to do to enable
both. Meanwhile, all the buildfarm hosts seem to be building with python
2 anyway, so this at least gets us some coverage.
Original patch from Michael Paquier, significantly modified by me.
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de, 20140923182422.GA15776@alap3.anarazel.de, 20131114172632.GE7522@alap2.anarazel.de
Tom Lane [Tue, 28 Apr 2015 19:34:35 +0000 (12:34 -0700)]
Fix another test for RELKIND_RELATION that should allow foreign tables now.
I thought I'd gone through all of these before, but a fresh review found
this one too. (Perhaps it would be better to just delete this test and
let the failure occur later, but for the moment I'll preserve the logic.)
The case that this was rejecting is like
CREATE FOREIGN TABLE ft (f1 int ...) ...;
CREATE TABLE c1 (UNIQUE(f1)) INHERITS(ft);
Tom Lane [Tue, 28 Apr 2015 19:25:00 +0000 (12:25 -0700)]
Fix ATSimpleRecursion() to allow recursion from a foreign table.
This is necessary in view of the changes to allow foreign tables to be
full members of inheritance hierarchies, but I (tgl) unaccountably missed
it in commit cb1ca4d800621dcae67ca6c799006de99fa4f0a5.
Andrew Dunstan [Tue, 28 Apr 2015 15:47:08 +0000 (11:47 -0400)]
Fix MSVC builds for contrib transforms modules.
With this patch the MSVC build and installation will work correctly with
the transforms. However the python transform tests for hstore and ltree
are still disabled pending some further adjustments.
Multixact member files are subject to early wraparound overflow and
removal: if the average multixact size is above a certain threshold (see
note below) the protections against offset overflow are not enough:
during multixact truncation at checkpoint time, some
pg_multixact/members files would be removed because the server considers
them to be old and not needed anymore. This leads to loss of files that
are critical to interpret existing tuples's Xmax values.
To protect against this, since we don't have enough info in pg_control
and we can't modify it in old branches, we maintain shared memory state
about the oldest value that we need to keep; we use this during new
multixact creation to abort if an old still-needed file would get
overwritten. This value is kept up to date by checkpoints, which makes
it not completely accurate but should be good enough. We start emitting
warnings sometime earlier, so that the eventual multixact-shutdown
doesn't take DBAs completely by surprise (more precisely: once 20
members SLRU segments are remaining before shutdown.)
On troublesome average multixact size: The threshold size depends on the
multixact freeze parameters. The oldest age is related to the greater of
multixact_freeze_table_age and multixact_freeze_min_age: anything
older than that should be removed promptly by autovacuum. If autovacuum
is keeping up with multixact freezing, the troublesome multixact average
size is
(2^32-1) / Max(freeze table age, freeze min age)
or around 28 members per multixact. Having an average multixact size
larger than that will eventually cause new multixact data to overwrite
the data area for older multixacts. (If autovacuum is not able to keep
up, or there are errors in vacuuming, the actual maximum is
multixact_freeeze_max_age instead, at which point multixact generation
is stopped completely. The default value for this limit is 400 million,
which means that the multixact size that would cause trouble is about 10
members).
Initial bug report by Timothy Garnett, bug #12990
Backpatch to 9.3, where the problem was introduced.
Authors: Álvaro Herrera, Thomas Munro
Reviews: Thomas Munro, Amit Kapila, Robert Haas, Kevin Grittner
Andres Freund [Mon, 27 Apr 2015 22:12:38 +0000 (00:12 +0200)]
Use a fd opened for read/write when syncing slots during startup.
Some operating systems, including the reporter's windows, return EBADFD
or similar when fsync() is invoked on a O_RDONLY file descriptor.
Unfortunately RestoreSlotFromDisk() does exactly that; which causes
failures after restarts in at least some scenarios.
If you hit the bug the error message will be something like
ERROR: could not fsync file "pg_replslot/$name/state": Bad file descriptor
Simply use O_RDWR instead of O_RDONLY when opening the relevant file
descriptor to fix the bug. Unfortunately I have no way of verifying the
fix, but we've seen similar problems in the past.
This bug goes back to 9.4 where slots were introduced. Backpatch
accordingly.
Stephen Frost [Mon, 27 Apr 2015 16:29:42 +0000 (12:29 -0400)]
Improve qual pushdown for RLS and SB views
The original security barrier view implementation, on which RLS is
built, prevented all non-leakproof functions from being pushed down to
below the view, even when the function was not receiving any data from
the view. This optimization improves on that situation by, instead of
checking strictly for non-leakproof functions, it checks for Vars being
passed to non-leakproof functions and allows functions which do not
accept arguments or whose arguments are not from the current query level
(eg: constants can be particularly useful) to be pushed down.
As discussed, this does mean that a function which is pushed down might
gain some idea that there are rows meeting a certain criteria based on
the number of times the function is called, but this isn't a
particularly new issue and the documentation in rules.sgml already
addressed similar covert-channel risks. That documentation is updated
to reflect that non-leakproof functions may be pushed down now, if
they meet the above-described criteria.
Author: Dean Rasheed, with a bit of rework to make things clearer,
along with comment and documentation updates from me.
Andrew Dunstan [Mon, 27 Apr 2015 14:50:46 +0000 (10:50 -0400)]
Fix vcbuild failures and chkpass dependency caused by 854adb8
Switching the Windows build scripts to use forward slashes instead of
backslashes has caused a couple of issues in VC builds:
- The file tree list was not correctly generated, build script
generating vcproj file missing tree dependencies when listing items in
Filter.
- VC builds do not accept file paths with forward slashes, perhaps it
could be possible to use a Condition but it seems safer to simply
enforce the file paths to use backslashes in the vcproj files.
- chkpass had an unneeded dependency with libpgport and libpgcommon to
make build succeed but actually it is not necessary as crypt.c is
already listed for this project and should be replaced with a fake name
as it is a unique file.
Peter Eisentraut [Sun, 26 Apr 2015 14:33:14 +0000 (10:33 -0400)]
Add transforms feature
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
Tom Lane [Sun, 26 Apr 2015 01:37:39 +0000 (21:37 -0400)]
Add comments warning against generalizing default_with_oids.
pg_dump has historically assumed that default_with_oids affects only plain
tables and not other relkinds. Conceivably we could make it apply to some
newly invented relkind if we did so from the get-go, but changing the
behavior for existing object types will break existing dump scripts.
Add code comments warning about this interaction.
Also, make sure that default_with_oids doesn't cause parse_utilcmd.c to
think that CREATE FOREIGN TABLE will create an OID column. I think this is
only a latent bug right now, since we don't allow UNIQUE/PKEY constraints
in CREATE FOREIGN TABLE, but it's better to be consistent and future-proof.
Peter Eisentraut [Sun, 26 Apr 2015 00:57:58 +0000 (20:57 -0400)]
Don't overwrite EXTRA_INSTALL
The temp-install target sets EXTRA_INSTALL to install the current
directory. But when doing so, it should append instead of overwrite,
otherwise settings of EXTRA_INSTALL from a makefile won't take effect.
This would cause the earthdistance test to fail when called directly,
because it would miss installing the cube module.
Tom Lane [Sat, 25 Apr 2015 20:44:27 +0000 (16:44 -0400)]
Prevent improper reordering of antijoins vs. outer joins.
An outer join appearing within the RHS of an antijoin can't commute with
the antijoin, but somehow I missed teaching make_outerjoininfo() about
that. In Teodor Sigaev's recent trouble report, this manifests as a
"could not find RelOptInfo for given relids" error within eqjoinsel();
but I think silently wrong query results are possible too, if the planner
misorders the joins and doesn't happen to trigger any internal consistency
checks. It's broken as far back as we had antijoins, so back-patch to all
supported branches.
Peter Eisentraut [Sat, 25 Apr 2015 12:52:03 +0000 (08:52 -0400)]
Replace backslashes by forward slashes in MSVC build code
This makes it possible to run some stages of these build scripts on
non-Windows systems. That way, we can more easily test whether file
moves or makefile changes might break the MSVC build.
Stephen Frost [Sat, 25 Apr 2015 00:34:26 +0000 (20:34 -0400)]
Perform RLS WITH CHECK before constraints, etc
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
The majority practice is to add -DFRONTEND in directories building files
that are, at other times, built for the backend. Some directories
lacking that property added a noise -DFRONTEND in one build system.
Remove the excess flags, for consistency.
Each of the libraries incorporates src/port files, which often check
FRONTEND. Build systems disagreed on whether to build libpgtypes this
way. Only libecpg incorporates files that rely on it today. Back-patch
to 9.0 (all supported versions) to forestall surprises.
Tom Lane [Fri, 24 Apr 2015 21:13:06 +0000 (17:13 -0400)]
Fix up .gitignore and cleanup actions in some src/test/ subdirectories.
examples/, locale/, and thread/ lacked .gitignore files and were also
not connected up to top-level "make clean" etc. This had escaped notice
because none of those directories are built in normal scenarios. Still,
they have working Makefiles, so if someone does a "make" in one of these
directories it would be good if (a) git doesn't bleat about the product
files and (b) cleaning up removes them.
This is a longstanding oversight, but since this behavior is probably
only of interest to developers, there seems no need for back-patching.
Tom Lane [Fri, 24 Apr 2015 19:18:07 +0000 (15:18 -0400)]
Fix obsolete comment in set_rel_size().
The cross-reference to set_append_rel_pathlist() was obsoleted by
commit e2fa76d80ba571d4de8992de6386536867250474, which split what
had been set_rel_pathlist() and child routines into two sets of
functions. But I (tgl) evidently missed updating this comment.
Back-patch to 9.2 to avoid unnecessary divergence among branches.
Peter Eisentraut [Fri, 24 Apr 2015 17:22:18 +0000 (13:22 -0400)]
doc: Move ALTER TABLE IF EXISTS description to better place
It was previously mixed in with the description of ALTER TABLE
subcommands. Move it to the Parameters section, which is where it is on
other reference pages.
Stephen Frost [Fri, 24 Apr 2015 13:38:10 +0000 (09:38 -0400)]
Copy the relation name for error reporting in WCOs
In get_row_security_policies(), we need to make a copy of the relation
name when building the WithCheckOptions structure, since
RelationGetRelationName just returns a pointer into the local Relation
structure. The relation name in the WCO structure is only used for
error reporting.
Pointed out by Robert and Christian Ullrich, who noted that the
buildfarm members with -DCLOBBER_CACHE_ALWAYS were failing.
Fix deadlock at startup, if max_prepared_transactions is too small.
When the startup process recovers transactions by scanning pg_twophase
directory, it should clear MyLockedGxact after it's done processing each
transaction. Like we do during normal operation, at PREPARE TRANSACTION.
Otherwise, if the startup process exits due to an error, it will try to
clear the locking_backend field of the last recovered transaction. That's
usually harmless, but if the error happens in MarkAsPreparing, while
holding TwoPhaseStateLock, the shmem-exit hook will try to acquire
TwoPhaseStateLock again, and deadlock with itself.
This fixes bug #13128 reported by Grant McAlister. The bug was introduced
by commit bb38fb0d, so backpatch to all supported versions like that
commit.
Peter Eisentraut [Thu, 23 Apr 2015 12:59:52 +0000 (08:59 -0400)]
Improve speed of make check-world
Before, make check-world would create a new temporary installation for
each test suite, which is slow and wasteful. Instead, we now create one
test installation that is used by all test suites that are part of a
make run.
The management of the temporary installation is removed from pg_regress
and handled in the makefiles. This allows for better control, and
unifies the code with that of test suites not run through pg_regress.
review and msvc support by Michael Paquier <michael.paquier@gmail.com>
more review by Fabien Coelho <coelho@cri.ensmp.fr>
Use the right type OID after creating a shell type
Commit a2e35b53c39b2a neglected to update the type OID to use further
down in DefineType when TypeShellMake was changed to return
ObjectAddress instead of OID (it got it right in DefineRange, however.)
This resulted in an internal error message being issued when looking up
I/O functions.
Author: Michael Paquier
Also add Asserts() to a couple of other places to ensure that the type
OID being used is as expected.
Stephen Frost [Wed, 22 Apr 2015 16:43:57 +0000 (12:43 -0400)]
Fix installcheck for test_rls_hooks
As pointed out by the buildfarm, test_rls_hooks wasn't functioning
properly with a clean installcheck. test_rls_hooks needs to explicitly
load the library with the hooks in it, to allow installcheck to work;
using the --temp-config doesn't help since that isn't used when running
installcheck and it isn't exactly fair to the buildfarm to modify the
installed config prior to calling installcheck.
Stephen Frost [Wed, 22 Apr 2015 16:01:06 +0000 (12:01 -0400)]
RLS fixes, new hooks, and new test module
In prepend_row_security_policies(), defaultDeny was always true, so if
there were any hook policies, the RLS policies on the table would just
get discarded. Fixed to start off with defaultDeny as false and then
properly set later if we detect that only the default deny policy exists
for the internal policies.
The infinite recursion detection in fireRIRrules() didn't properly
manage the activeRIRs list in the case of WCOs, so it would incorrectly
report infinite recusion if the same relation with RLS appeared more
than once in the rtable, for example "UPDATE t ... FROM t ...".
Further, the RLS expansion code in fireRIRrules() was handling RLS in
the main loop through the rtable, which lead to RTEs being visited twice
if they contained sublink subqueries, which
prepend_row_security_policies() attempted to handle by exiting early if
the RTE already had securityQuals. That doesn't work, however, since
if the query involved a security barrier view on top of a table with
RLS, the RTE would already have securityQuals (from the view) by the
time fireRIRrules() was invoked, and so the table's RLS policies would
be ignored. This is fixed in fireRIRrules() by handling RLS in a
separate loop at the end, after dealing with any other sublink
subqueries, thus ensuring that each RTE is only visited once for RLS
expansion.
The inheritance planner code didn't correctly handle non-target
relations with RLS, which would get turned into subqueries during
planning. Thus an update of the form "UPDATE t1 ... FROM t2 ..." where
t1 has inheritance and t2 has RLS quals would fail. Fix by making sure
to copy in and update the securityQuals when they exist for non-target
relations.
process_policies() was adding WCOs to non-target relations, which is
unnecessary, and could lead to a lot of wasted time in the rewriter and
the planner. Fix by only adding WCO policies when working on the result
relation. Also in process_policies, we should be copying the USING
policies to the WITH CHECK policies on a per-policy basis, fix by moving
the copying up into the per-policy loop.
Lastly, as noted by Dean, we were simply adding policies returned by the
hook provided to the list of quals being AND'd, meaning that they would
actually restrict records returned and there was no option to have
internal policies and hook-based policies work together permissively (as
all internal policies currently work). Instead, explicitly add support
for both permissive and restrictive policies by having a hook for each
and combining the results appropriately. To ensure this is all done
correctly, add a new test module (test_rls_hooks) to test the various
combinations of internal, permissive, and restrictive hook policies.
Stephen Frost [Wed, 22 Apr 2015 15:29:35 +0000 (11:29 -0400)]
Pull in tableoid for inheiritance with rowMarks
As noted by Etsuro Fujita [1] and Dean Rasheed[2], cb1ca4d800621dcae67ca6c799006de99fa4f0a5 changed ExecBuildAuxRowMark()
to always look for the tableoid in the target list, but didn't also
change preprocess_targetlist() to always include the tableoid. This
resulted in errors with soon-to-be-added RLS with inheritance tests,
and errors when using inheritance with foreign tables.
Authors: Etsuro Fujita and Dean Rasheed (independently)
Make the pg_rewind regression tests more robust on slow systems.
There were a couple of hard-coded sleeps in the tests: to wait for standby
to catch up with master, and to wait for promotion with "pg_ctl promote"
to complete. Instead of a fixed, hard-coded sleep, poll the server with a
query once a second. This isn't ideal either, and I wish we had a better
solution for real-world applications too, but this should fix the
immediate problem.
Patch by Michael Paquier, with some editing by me.
Andres Freund [Tue, 21 Apr 2015 09:51:06 +0000 (11:51 +0200)]
Add 'active_in' column to pg_replication_slots.
Right now it is visible whether a replication slot is active in any
session, but not in which. Adding the active_in column, containing the
pid of the backend having acquired the slot, makes it much easier to
associate pg_replication_slots entries with the corresponding
pg_stat_replication/pg_stat_activity row.
This should have been done from the start, but I (Andres) dropped the
ball there somehow.
Author: Craig Ringer, revised by me Discussion:
CAMsr+YFKgZca5_7_ouaMWxA5PneJC9LNViPzpDHusaPhU9pA7g@mail.gmail.com
Stephen Frost [Fri, 17 Apr 2015 20:37:11 +0000 (16:37 -0400)]
Fix typo in relcache's equalPolicy()
The USING policies were not being checked for differences as the same
policy was being passed in to both sides of the equal(). This could
result in backends not realizing that a policy had been changed, if
none of the other attributes had been changed.
Fix by passing to equal() the policy1 and policy2 using quals for
comparison.
No need to back-patch as this is not yet released. Noticed while
testing changes to RLS proposed by Dean Rasheed.
Logical decoding set SnapshotData's regd_count field to avoid the
snapshot manager from prematurely freeing snapshots that are generated
by the decoding system. That was always an abuse of the field, as it was
never supposed to be used outside the snapshot manager. Commit 94028691
made snapshot manager's tracking of the snapshots smarter, and that scheme
fell apart. The snapshot manager got confused and hit the assertion, when
a snapshot that was marked with regd_count==1 was not found in the heap,
where the snapshot manager tracks registered the snapshots.
To fix, don't abuse the regd_count field like that. Logical decoding still
abuses the active_count field for similar purposes, but that's currently
harmless.
The assertion failure was first reported by Michael Paquier
Update comments and function names to use the terms "source" and "target"
consistently. Some places were calling them remote and local instead, which
was confusing.
Fix incorrect comment in extractPageInfo on database creation record - it
was wrong on what happens for databases created in the target that don't
exist in source.
Shut down test servers after pg_rewind regression tests.
Now that the test servers are initialized twice in each .pl script,
the single END block is not enough to stop them. Add a new clean_rewind_test
function that is called at the end of each test.
Fix logic to skip checkpoint if no records have been inserted.
After the WAL format changes, the calculation of the size of a checkpoint
record became incorrect. Instead of trying to fix the math, check that the
previous record, i.e. the xl_prev value that we'd write for the next
record, matches the last checkpoint's redo pointer. That way it's not
dependent on the size of the checkpoint record at all.
The old logic was actually slightly wrong all along: if the previous
checkpoint record crossed a page boundary, the page headers threw off the
record size calculation, and the checkpoint was not skipped. The new
checkpoint would not cross a page boundary, so this only resulted in at
most one extra checkpoint after the system became idle. The new logic fixes
that. (It's not worth fixing in backbranches).
However, it makes some sense to try to keep the latest checkpoint contained
fully in a page, or at least in a single WAL segment, just on general
robustness grounds. If something goes awfully wrong, it's more likely that
you can recover the latest WAL segment, than the last two WAL segments. So
I added an extra check that the checkpoint is not skipped if the previous
checkpoint crossed a WAL segment.
Peter Eisentraut [Wed, 11 Mar 2015 02:33:25 +0000 (22:33 -0400)]
Integrate pg_upgrade_support module into backend
Previously, these functions were created in a schema "binary_upgrade",
which was deleted after pg_upgrade was finished. Because we don't want
to keep that schema around permanently, move them to pg_catalog but
rename them with a binary_upgrade_... prefix.
The provided functions are only small wrappers around global variables
that were added specifically for pg_upgrade use, so keeping the module
separate does not create any modularity.
The functions still check that they are only called in binary upgrade
mode, so it is not possible to call these during normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Optimize pg_comp_crc32c_sse42 routine slightly, and also use it on x86.
Eliminate the separate 'len' variable from the loops, and also use the 4
byte instruction. This shaves off a few more cycles. Even though this
routine that uses the special SSE 4.2 instructions is much faster than a
generic routine, it's still a hot spot, so let's make it as fast as
possible.
Change the configure test to not test _mm_crc32_u64. That variant is only
available in the 64-bit x86-64 architecture, not in 32-bit x86. Modify
pg_comp_crc32c_sse42 so that it only uses _mm_crc32_u64 on x86-64. With
these changes, the SSE accelerated CRC-32C implementation can also be used
on 32-bit x86 systems.
Try to fix the CRC-32C autoconf magic for icc compiler.
On gcc and clang, the _mm_crc32_u8 and _mm_crc32_u64 intrinsics are not
defined at all, when not building with -msse4.2. But on icc, they are.
So we cannot assume that if those intrinsics are defined, we can always use
them safely, we might still need the runtime check.
To fix, check if the __SSE_4_2__ preprocessor symbol is defined. That's
supposed to be defined only when the compiler is targeting a processor that
has SSE 4.2 support.
I introduced this ancient typo in subtrans.c and later propagated it to
multixact.c. I fixed the latter in f741300c, but only back to 9.3;
backpatch to all supported branches for consistency.
Use Intel SSE 4.2 CRC instructions where available.
Modern x86 and x86-64 processors with SSE 4.2 support have special
instructions, crc32b and crc32q, for calculating CRC-32C. They greatly
speed up CRC calculation.
Whether the instructions can be used or not depends on the compiler and the
target architecture. If generation of SSE 4.2 instructions is allowed for
the target (-msse4.2 flag on gcc and clang), use them. If they are not
allowed by default, but the compiler supports the -msse4.2 flag to enable
them, compile just the CRC-32C function with -msse4.2 flag, and check at
runtime whether the processor we're running on supports it. If it doesn't,
fall back to the slicing-by-8 algorithm. (With the common defaults on
current operating systems, the runtime-check variant is what you get in
practice.)
Abhijit Menon-Sen, heavily modified by me, reviewed by Andres Freund.
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
projects / postgresql / log