Michael Paquier [Sun, 8 Jul 2018 09:53:20 +0000 (18:53 +0900)]
Use access() to check file existence in GetNewRelFileNode()
Previous code used BasicOpenFile() and close() just to check for a file
collision, while there is no need to hold open a file descriptor but
that's an overkill here.
Author: Paul Guo Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/CABQrizcUtiHaquxK=d4etBX8GF9kbZB50Nt1gO9_aN-e9SptyQ@mail.gmail.com
Add separate error message for procedure does not exist
While we probably don't want to split up all error messages into
function and procedure variants, this one is a very prominent one, so
it's helpful to be more specific here.
Michael Paquier [Fri, 6 Jul 2018 23:10:10 +0000 (08:10 +0900)]
Add note in pg_rewind documentation about read-only files
When performing pg_rewind, the presence of a read-only file which is not
accessible for writes will cause a failure while processing. This can
cause the control file of the target data folder to be truncated,
causing it to not be reusable with a successive run.
Also, when pg_rewind fails mid-flight, there is likely no way to be able
to recover the target data folder anyway, in which case a new base
backup is the best option. A note is added in the documentation as
well about.
Reported-by: Christian H.
Author: Michael Paquier Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20180104200633.17004.16377%40wrigleys.postgresql.org
Peter Eisentraut [Fri, 29 Jun 2018 11:28:39 +0000 (13:28 +0200)]
Fix assert in nested SQL procedure call
When executing CALL in PL/pgSQL, we need to set a snapshot before
invoking the to-be-called procedure. Otherwise, the to-be-called
procedure might end up running without a snapshot. For LANGUAGE SQL
procedures, this would result in an assertion failure. (For most other
languages, this is usually not a problem, because those use SPI and SPI
sets snapshots in most cases.) Setting the snapshot restores the
behavior of how CALL worked when it was handled as a generic SQL
statement in PL/pgSQL (exec_stmt_execsql()).
This change revealed another problem: In SPI_commit(), we popped the
active snapshot before committing the transaction, to avoid "snapshot %p
still active" errors. However, there is no particular reason why only
at most one snapshot should be on the stack. So change this to pop all
active snapshots instead of only one.
Allow replication slots to be dropped in single-user mode
Starting with commit 9915de6c1cb2, replication slot drop uses a
condition variable sleep to wait until the current user of the slot goes
away. This is more user friendly than the previous behavior of erroring
out if the slot is in use, but it fails with a not-for-user-consumption
error message in single-user mode; plus, if you're using single-user
mode because you don't want to start the server in the regular mode
(say, disk is full and WAL won't recycle because of the slot), it's
inconvenient.
Fix by skipping the cond variable sleep in single-user mode, since
there can't be anybody to wait for anyway.
logical decoding: beware of an unset specinsert change
Coverity complains that there is no protection in the code (at least in
non-assertion-enabled builds) against speculative insertion failing to
follow the expected protocol. Add an elog(ERROR) for the case.
doc: Reword old inheritance partitioning documentation
Prefer to use phrases like "child" instead of "partition" when
describing the legacy inheritance-based partitioning. The word
"partition" now has a fixed meaning for the built-in partitioning, so
keeping it out of the documentation of the old method makes things
clearer.
Reduce cost of test_decoding's new oldest_xmin test
Change a whole-database VACUUM into doing just pg_attribute, which is
the portion that verifies what we want it to do. The original
formulation wastes a lot of CPU time, which leads the test to fail when
runtime exceeds isolationtester timeout when it's super-slow, such as
under CLOBBER_CACHE_ALWAYS. Per buildfarm member friarbird.
It turns out that the previous shape of the test doesn't always detect
the condition it is supposed to detect (on unpatched reorderbuffer
code): the reason is that there is a good chance of encountering a
xl_running_xacts record (logged every 15 seconds) before the checkpoint
-- and because we advance the xmin when we receive that WAL record, and
we *don't* advance the xmin twice consecutively without receiving a
client message in between, that means the xmin is not advanced enough
for the tuple to be pruned from pg_attribute by VACUUM. So the test
would spuriously pass.
The reason this test deficiency wasn't detected earlier is that HOT
pruning removes the tuple anyway, even if vacuum leaves it in place, so
the test correctly fails (detecting the coding mistake), but for the
wrong reason.
To fix this mess, run the s0_get_changes step twice before vacuum
instead of once: this seems to cause the xmin to be advanced reliably,
wreaking havoc with more certainty.
Michael Paquier [Thu, 5 Jul 2018 01:46:18 +0000 (10:46 +0900)]
Prevent references to invalid relation pages after fresh promotion
If a standby crashes after promotion before having completed its first
post-recovery checkpoint, then the minimal recovery point which marks
the LSN position where the cluster is able to reach consistency may be
set to a position older than the first end-of-recovery checkpoint while
all the WAL available should be replayed. This leads to the instance
thinking that it contains inconsistent pages, causing a PANIC and a hard
instance crash even if all the WAL available has not been replayed for
certain sets of records replayed. When in crash recovery,
minRecoveryPoint is expected to always be set to InvalidXLogRecPtr,
which forces the recovery to replay all the WAL available, so this
commit makes sure that the local copy of minRecoveryPoint from the
control file is initialized properly and stays as it is while crash
recovery is performed. Once switching to archive recovery or if crash
recovery finishes, then the local copy minRecoveryPoint can be safely
updated.
Pavan Deolasee has reported and diagnosed the failure in the first
place, and the base fix idea to rely on the local copy of
minRecoveryPoint comes from Kyotaro Horiguchi, which has been expanded
into a full-fledged patch by me. The test included in this commit has
been written by Álvaro Herrera and Pavan Deolasee, which I have modified
to make it faster and more reliable with sleep phases.
Backpatch down to all supported versions where the bug appears, aka 9.3
which is where the end-of-recovery checkpoint is not run by the startup
process anymore. The test gets easily supported down to 10, still it
has been tested on all branches.
Andres Freund [Thu, 5 Jul 2018 00:36:01 +0000 (17:36 -0700)]
Use context with correct lifetime in hypothetical_dense_rank_final.
The query lifetime expression context created in
hypothetical_dense_rank_final() was buggily allocated in the calling
memory context. I (Andres) broke that in bf6c614a2f2.
Reported-By: Rajkumar Raghuwanshi
Author: Amit Langote
Discussion: https://postgr.es/m/CAKcux6kmzWmur5HhA_aU6gYVFu0RLQdgJJ+aC9SLdcOvBSrpfA@mail.gmail.com
Backpatch: 11-
Andres Freund [Wed, 4 Jul 2018 21:53:30 +0000 (14:53 -0700)]
Check for interrupts inside the nbtree page deletion code.
When deleting pages the nbtree code has to walk through siblings of a
tree node. When those sibling links are corrupted that can lead to
endless loops - which are currently not interruptible. This is
especially problematic if autovacuum is repeatedly blocked on such
indexes, as it can be hard to get out of that situation without
resorting to single user mode.
Thus add interrupt checks to appropriate places in such
loops. Unfortunately in one of the cases it's it's not easy to do so.
Between 9.3 and 9.4 the page deletion (and page split) code changed
significantly. Before it was significantly less robust against
interruptions. Therefore don't backpatch to 9.3.
Author: Andres Freund
Discussion: https://postgr.es/m/20180627191629.wkunw2qbibnvlz53@alap3.anarazel.de
Backpatch: 9.4-
Improve the performance of relation deletes during recovery.
When multiple relations are deleted at the same transaction,
the files of those relations are deleted by one call to smgrdounlinkall(),
which leads to scan whole shared_buffers only one time. OTOH,
previously, during recovery, smgrdounlink() (not smgrdounlinkall()) was
called for each file to delete, which led to scan shared_buffers
multiple times. Obviously this could cause to increase the WAL replay
time very much especially when shared_buffers was huge.
To alleviate this situation, this commit changes the recovery so that
it also calls smgrdounlinkall() only one time to delete multiple
relation files.
This is just fix for oversight of commit 279628a0a7, not new feature.
So, per discussion on pgsql-hackers, we concluded to backpatch this
to all supported versions.
Author: Fujii Masao Reviewed-by: Michael Paquier, Andres Freund, Thomas Munro, Kyotaro Horiguchi, Takayuki Tsunakawa
Discussion: https://postgr.es/m/CAHGQGwHVQkdfDqtvGVkty+19cQakAydXn1etGND3X0PHbZ3+6w@mail.gmail.com
Michael Paquier [Wed, 4 Jul 2018 01:37:40 +0000 (10:37 +0900)]
Remove dead code for temporary relations in partition planning
Since recent commit 1c7c317c, temporary relations cannot be mixed with
permanent relations within the same partition tree, and the same counts
for temporary relations created by other sessions, which the planner
simply discarded. Instead be paranoid and issue an error, as those
should be blocked at definition time, at least for now.
At the same time, a test case is added to stress what has been moved
when expand_partitioned_rtentry gets called recursively but bumps on a
partitioned relation with no partitions which should be handled the same
way as the non-inheritance case. This code may be reworked in a close
future, and covering this code path will limit surprises.
Reported-by: David Rowley
Author: David Rowley Reviewed-by: Amit Langote, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f_HyV1txn_4XSdH5EOhBMYaCwsXyAj6bHXk9gOu4JKsbw@mail.gmail.com
Michael Paquier [Mon, 2 Jul 2018 13:19:46 +0000 (22:19 +0900)]
Add wait event for fsync of WAL segments
This has been visibly a forgotten spot in the first implementation of
wait events for I/O added by 249cf07, and what has been missing is a
fsync call for WAL segments which is a wrapper reacting on the value of
GUC wal_sync_method.
Reported-by: Konstantin Knizhnik
Author: Konstantin Knizhnik Reviewed-by: Craig Ringer, Michael Paquier
Discussion: https://postgr.es/m/4a243897-0ad8-f471-aa40-242591f2476e@postgrespro.ru
When these programs call pg_catalog.set_config, they need to check for
PGRES_TUPLES_OK instead of PGRES_COMMAND_OK. Fix for 5770172cb0c9df9e6ce27c507b449557e5b45124.
Michael Paquier [Sun, 1 Jul 2018 11:20:06 +0000 (20:20 +0900)]
Add tests for inheritance trees mixing permanent and temporary relations
While working on 1c7c317c and related things, which has clarified the
use of partitions with temporary tables, I have noticed that there could
be better coverage for inheritance trees mixing temporary and permanent
relations. A lot of cross-checks happen in MergeAttributes() which is
not designed for this purpose, so the tests added in this commit will
make sure that any kind of future refactoring will limit the amount of
compatibility breakage.
Author: Michael Paquier Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/20180619022131.GE3314@paquier.xyz
Peter Eisentraut [Tue, 22 May 2018 18:25:01 +0000 (14:25 -0400)]
Use $Test::Builder::Level in TAP test functions
In TAP test functions, that is, those that produce test results, locally
increment $Test::Builder::Level. This has the effect that test failures
are reported at the callers location rather than somewhere in the test
support libraries.
Michael Paquier [Sun, 1 Jul 2018 06:10:10 +0000 (15:10 +0900)]
Use optimized bitmap set function for membership test in postgres_fdw
Deparsing logic in postgres_fdw for locking, FROM clause (alias) and Var
(column qualification) does not need to know the exact number of members
involved, which can be calculated with bms_num_members(), but just if
there is more than one relation involved, which is what bms_membership()
does. The latter is more performant than the former so this shaves a
couple of cycles.
Author: Daniel Gustafsson Reviewed-by: Ashutosh Bapat, Nathan Bossart
Discussion: https://postgr.es/m/C73594E0-2B67-4E10-BB35-CDE0E41CC384@yesql.se
Alvaro Herrera [Fri, 29 Jun 2018 15:40:36 +0000 (11:40 -0400)]
psql: show cloned triggers in partitions
In a partition, row triggers that had been cloned from their parent
partitioned table would not be listed at all in psql's \d, which could
surprise users, per insistent complaint from Ashutosh Bapat (though his
aim was elsewhere). The simplest possible fix, suggested by Peter
Eisentraut, seems to be to list triggers marked as internal if they have
a row in pg_depend that points to some other trigger.
Alvaro Herrera [Fri, 29 Jun 2018 15:27:57 +0000 (11:27 -0400)]
Fix crash when ALTER TABLE recreates indexes on partitions
The skip_build flag was not being passed correctly when recursing to
indexes on partitions, leading to attempts to rebuild indexes when they
were not yet ready to be rebuilt.
Michael Paquier [Fri, 29 Jun 2018 13:02:20 +0000 (22:02 +0900)]
Replace search.cpan.org with metacpan.org
search.cpan.org has been EOL'd, with metacpan.org being the official
replacement to which URLs now redirect. Update links to match the new
URL. Also update links to CPAN to use https as it will redirect from
http.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/B74C0219-6BA9-46E1-A524-5B9E8CD3BDB3@yesql.se
Andres Freund [Wed, 27 Jun 2018 06:40:32 +0000 (23:40 -0700)]
Change pqformat.h's integer handling functions to take unsigned integers.
As added in 1de09ad8eb1fa673ee7899d6dfbb2b49ba204818 the new functions
all accept signed integers as parameters. That's not great, because
it's perfectly reasonable to call them with unsigned parameters.
Unfortunately unsigned to signed conversion is not well defined, when
exceeding the range of the signed value. That's presently not a
practical issue in postgres (among other reasons because we force
gcc's hand with -fwrapv). But it's clearly not quite right.
Thus change the signatures to accept unsigned integers instead, signed
to unsigned conversion is always well defined. Also change the
backward compat pq_sendint() - while it's deprecated it seems better
to be consistent.
Per discussion between Andrew Gierth, Michael Paquier, Alvaro Herrera
and Tom Lane.
Reported-By: Andrew Gierth
Author: Andres Freund
Discussion: https://postgr.es/m/87r2m10zm2.fsf@news-spur.riddles.org.uk
Amit Kapila [Wed, 27 Jun 2018 02:46:13 +0000 (08:16 +0530)]
Cosmetic improvements for faster column addition.
Changed the name of few structure members for the sake of clarity and
removed spurious whitespace.
Reported-by: Amit Kapila
Author: Amit Kapila, based on suggestion by Andrew Dunstan Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/CAA4eK1K2znsFpC+NQ9A4vxT4uDxADN4RmvHX0L6Y=aHVo9gB4Q@mail.gmail.com
Alvaro Herrera [Tue, 26 Jun 2018 20:38:34 +0000 (16:38 -0400)]
Fix "base" snapshot handling in logical decoding
Two closely related bugs are fixed. First, xmin of logical slots was
advanced too early. During xl_running_xacts processing, xmin of the
slot was set to the oldest running xid in the record, but that's wrong:
actually, snapshots which will be used for not-yet-replayed transactions
might consider older txns as running too, so we need to keep xmin back
for them. The problem wasn't noticed earlier because DDL which allows
to delete tuple (set xmax) while some another not-yet-committed
transaction looks at it is pretty rare, if not unique: e.g. all forms of
ALTER TABLE which change schema acquire ACCESS EXCLUSIVE lock
conflicting with any inserts. The included test case (test_decoding's
oldest_xmin) uses ALTER of a composite type, which doesn't have such
interlocking.
To deal with this, we must be able to quickly retrieve oldest xmin
(oldest running xid among all assigned snapshots) from ReorderBuffer. To
fix, add another list of ReorderBufferTXNs to the reorderbuffer, where
transactions are sorted by base-snapshot-LSN. This is slightly
different from the existing (sorted by first-LSN) list, because a
transaction can have an earlier LSN but a later Xmin, if its first
record does not obtain an xmin (eg. xl_xact_assignment). Note this new
list doesn't fully replace the existing txn list: we still need that one
to prevent WAL recycling.
The second issue concerns SnapBuilder snapshots and subtransactions.
SnapBuildDistributeNewCatalogSnapshot never assigned a snapshot to a
transaction that is known to be a subtxn, which is good in the common
case that the top-level transaction already has one (no point in doing
so), but a bug otherwise. To fix, arrange to transfer the snapshot from
the subtxn to its top-level txn as soon as the kinship gets known.
test_decoding's snapshot_transfer verifies this.
Also, fix a minor memory leak: refcount of toplevel's old base snapshot
was not decremented when the snapshot is transferred from child.
Liberally sprinkle code comments, and rewrite a few existing ones. This
part is my (Álvaro's) contribution to this commit, as I had to write all
those comments in order to understand the existing code and Arseny's
patch.
Fix upper limit for vacuum_cleanup_index_scale_factor
6ca33a88 sets upper limit for vacuum_cleanup_index_scale_factor to
DBL_MAX. DBL_MAX appears to be platform-dependent. That causes
many buildfarm animals to fail, because we check boundaries of
vacuum_cleanup_index_scale_factor in regression tests.
This commit changes upper limit from DBL_MAX to just "large enough"
limit, which was arbitrary selected as 1e10.
Author: Alexander Korotkov Reported-by: Tom Lane, Darafei Praliaskouski
Discussion: https://postgr.es/m/CAPpHfdvewmr4PcpRjrkstoNn1n2_6dL-iHRB21CCfZ0efZdBTg%40mail.gmail.com
Discussion: https://postgr.es/m/CAC8Q8tLYFOpKNaPS_E7V8KtPdE%3D_TnAn16t%3DA3LuL%3DXjfOO-BQ%40mail.gmail.com
Peter Geoghegan [Tue, 26 Jun 2018 18:16:20 +0000 (11:16 -0700)]
Correct a comment on logtape.c's leader tape.
randomAccess parallel tuplesorts are disallowed because the leader would
try to write to its own leader tape, not because the leader would try to
write to a worker tape directly.
Peter Geoghegan [Tue, 26 Jun 2018 17:08:44 +0000 (10:08 -0700)]
Remove obsolete comment block in nbtsort.c.
Building a new nbtree index through incremental insertions would always
be slower than our actual approach of sorting using tuplesort,
assembling leaf pages from tuplesort output, and writing and WAL-logging
whole pages. Remove a comment block from the Berkeley days claiming
that incremental insertions might be slightly faster with presorted
input.
Alvaro Herrera [Tue, 26 Jun 2018 15:28:41 +0000 (11:28 -0400)]
Enable failure to rename a partitioned index
Concurrently with partitioned index development (commit 8b08f7d4820f),
the code to handle failure to rename indexes was refactored (commit 8b9e9644dc6a). Turns out that that particular case was untested, which
naturally led it to be broken. Add tests and the missing code line.
Fujii Masao [Tue, 26 Jun 2018 15:45:21 +0000 (00:45 +0900)]
Fix documentation bug related to backup history file.
The backup history file has been no longer necessary for recovery
since the version 9.0. It's now basically just for informational purpose.
But previously the documentations still described that a recovery
requests the backup history file to proceed. The commit fixes this
documentation bug.
Alvaro Herrera [Tue, 26 Jun 2018 14:35:26 +0000 (10:35 -0400)]
Allow direct lookups of AppendRelInfo by child relid
find_appinfos_by_relids had quite a large overhead when the number of
items in the append_rel_list was high, as it had to trawl through the
append_rel_list looking for AppendRelInfos belonging to the given
childrelids. Since there can only be a single AppendRelInfo for each
child rel, it seems much better to store an array in PlannerInfo which
indexes these by child relid, making the function O(1) rather than O(N).
This function was only called once inside the planner, so just replace
that call with a lookup to the new array. find_childrel_appendrelinfo
is now unused and thus removed.
This fixes a planner performance regression new to v11 reported by
Thomas Reiss.
Author: David Rowley Reported-by: Thomas Reiss Reviewed-by: Ashutosh Bapat Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/94dd7a4b-5e50-0712-911d-2278e055c622@dalibo.com
Increase upper limit for vacuum_cleanup_index_scale_factor
Upper limits for vacuum_cleanup_index_scale_factor GUC and reloption
were initially set to 100.0 in 857f9c36. However, after further
discussion, it appears that some users like to disable B-tree cleanup
index scan completely (assuming there are no deleted pages).
vacuum_cleanup_index_scale_factor is used barely to protect against
stalled index statistics. And after detailed consideration it appears
that risk of stalled index statistics is low. And it would be nice to
allow advanced users setting higher values of
vacuum_cleanup_index_scale_factor. So, set upper limit for these
GUC and reloption to DBL_MAX.
Author: Alexander Korotkov Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAC8Q8tJCb%3DgxhzcV7T6ctx7PY-Ux1oA-AsTJc6cAVNsQiYcCzA%40mail.gmail.com
Peter Eisentraut [Tue, 26 Jun 2018 09:38:46 +0000 (11:38 +0200)]
Reword SPI_ERROR_TRANSACTION errors in PL/pgSQL
The previous message for SPI_ERROR_TRANSACTION claimed "cannot begin/end
transactions in PL/pgSQL", but that is no longer true. Nevertheless,
the error can still happen, so reword the messages. The error cases in
exec_prepare_plan() could never happen, so remove them.
Thomas Munro [Tue, 26 Jun 2018 05:16:34 +0000 (17:16 +1200)]
Move RecoveryLockList into a hash table.
Standbys frequently need to release all locks held by a given xid.
Instead of searching one big list linearly, let's create one list
per xid and put them in a hash table, so we can find what we need
in O(1) time.
Earlier analysis and a prototype were done by David Rowley, though
this isn't his patch.
Back-patch all the way.
Author: Thomas Munro Diagnosed-by: David Rowley, Andres Freund Reviewed-by: Andres Freund, Tom Lane, Robert Haas
Discussion: https://postgr.es/m/CAEepm%3D1mL0KiQ2KJ4yuPpLGX94a4Ns_W6TL4EGRouxWibu56pA%40mail.gmail.com
Discussion: https://postgr.es/m/CAKJS1f9vJ841HY%3DwonnLVbfkTWGYWdPN72VMxnArcGCjF3SywA%40mail.gmail.com
Michael Paquier [Tue, 26 Jun 2018 00:41:58 +0000 (09:41 +0900)]
Correct handling of fsync failures with tar mode of walmethods.c
This file has been missing the fact that it needs to report back to
callers a proper failure on fsync calls. I have spotted the one in
tar_finish() while Kuntal has spotted the one in tar_close().
Backpatch down to 10 where this code has been introduced.
Reported by: Michael Paquier, Kuntal Ghosh
Author: Michael Paquier Reviewed-by: Kuntal Ghosh, Magnus Hagander
Discussion: https://postgr.es/m/20180625024356.GD1146@paquier.xyz
Michael Paquier [Mon, 25 Jun 2018 02:19:05 +0000 (11:19 +0900)]
Address set of issues with errno handling
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
Alvaro Herrera [Fri, 22 Jun 2018 19:12:53 +0000 (15:12 -0400)]
When index recurses to a partition, map columns numbers
Two out of three code paths were mapping column numbers correctly if a
partition had different column numbers than parent table, but the most
commonly used one (recursing in CREATE INDEX to a new index on a
partition) failed to map attribute numbers in expressions. Oddly
enough, attnums in WHERE clauses are already handled correctly
everywhere.
Reported-by: Amit Langote
Author: Amit Langote
Discussion: https://postgr.es/m/dce1fda4-e0f0-94c9-6abb-f5956a98c057@lab.ntt.co.jp Reviewed-by: Álvaro Herrera
Robert Haas [Fri, 22 Jun 2018 13:14:34 +0000 (09:14 -0400)]
Avoid generating bogus paths with partitionwise aggregate.
Previously, if some or all partitions had no partially aggregated path,
we would still try to generate a partially aggregated path for the
parent, leading to assertion failures or wrong answers.
Report by Rajkumar Raghuwanshi. Patch by Jeevan Chalke, reviewed
by Ashutosh Bapat. A few changes by me.
Andrew Dunstan [Fri, 22 Jun 2018 12:42:36 +0000 (08:42 -0400)]
Allow for pg_upgrade of attributes with missing values
Commit 16828d5c02 neglected to do this, so upgraded databases would
silently get null instead of the specified default in rows without the
attribute defined.
A new binary upgrade function is provided to perform this and pg_dump is
adjusted to output a call to the function if required in binary upgrade
mode.
Also included is code to drop missing attribute values for dropped
columns. That way if the type is later dropped the missing value won't
have a dangling reference to the type.
Finally the regression tests are adjusted to ensure that there is a row
with a missing value so that this code is exercised in upgrade testing.
Catalog version unfortunately bumped.
Regression test changes from Tom Lane.
Remainder from me, reviewed by Tom Lane, Andres Freund, Alvaro Herrera
Fixes for vacuum_cleanup_index_scale_factor GUC option
vacuum_cleanup_index_scale_factor was located in autovacuum group of
GUCs. However, it affects not only autovacuum, but also manually run
VACUUM. It appears that "client connection defaults" group of GUCs
is more appropriate for vacuum_cleanup_index_scale_factor, because
vacuum_*_age options are already located there.
Also, vacuum_cleanup_index_scale_factor was missed in
postgresql.conf.sample. So, add it there with appropriate comment.
Author: Masahiko Sawada with minor editorization by me
Discussion: https://postgr.es/m/CAD21AoArsoXMLKudXSKN679FRzs6oubEchM53bHwn8Tp%3D2boNg%40mail.gmail.com
Amit Kapila [Fri, 22 Jun 2018 03:13:36 +0000 (08:43 +0530)]
Improve coding pattern in Parallel Append code.
The create_append_path code didn't consider that list_concat will
modify it's first argument leading to inconsistent traversal of
resulting list. In practice, it won't lead to any user-visible bug
but changing it for making the code behave consistently.
Reported-by: Tom Lane
Author: Tom Lane Reviewed-by: Amit Khandekar and Amit Kapila
Discussion: https://postgr.es/m/32365.1528994120@sss.pgh.pa.us
Alvaro Herrera [Thu, 21 Jun 2018 21:01:10 +0000 (17:01 -0400)]
Disclaim support for default namespace in XMLTABLE
Pavel Stehule's original patch had support for default namespace, but I
ripped it out before commit -- hence the docs were correct when written,
and I broke them by omission :-(. Remove the offending phrase.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/1550C5E5-FC70-4493-A226-AA137D831E8D@yesql.se
Tom Lane [Thu, 21 Jun 2018 20:18:33 +0000 (16:18 -0400)]
Fix partial aggregation for variance(int4) and related aggregates.
A typo in numeric_poly_combine caused bogus results for queries using
it, but of course would only manifest if parallel aggregation is
performed. Reported by Rajkumar Raghuwanshi.
David Rowley did the diagnosis and the fix; I editorialized rather
heavily on his regression test additions.
Back-patch to v10 where the breakage was introduced (by 9cca11c91).
Alvaro Herrera [Thu, 21 Jun 2018 19:56:11 +0000 (15:56 -0400)]
Set correct context for XPath evaluation
According to the SQL standard, the context of XMLTABLE's XPath
row_expression is the document node of the XML input document, not the
root node. This becomes visible when a relative path rather than
absolute is used as row expression. Absolute paths is what was used in
original tests and docs (and the most common form used in examples
throughout the interwebs), which explains why this wasn't noticed
before.
Other functions such as xpath() and xpath_exists() also have this
problem. While not specified by the SQL standard, it would be pretty
odd to leave those functions to behave differently than XMLTABLE, so
change them too. However, this is a backwards-incompatible change.
No backpatch, out of fear of breaking code depending on the original
broken behavior.
Author: Markus Winand Reported-By: Markus Winand Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/0684A598-002C-42A2-AE12-F024A324EAE4@winand.at
Tom Lane [Thu, 21 Jun 2018 14:58:42 +0000 (10:58 -0400)]
Fix mishandling of sortgroupref labels while splitting SRF targetlists.
split_pathtarget_at_srfs() neglected to worry about sortgroupref labels
in the intermediate PathTargets it constructs. I think we'd supposed
that their labeling didn't matter, but it does at least for the case that
GroupAggregate/GatherMerge nodes appear immediately under the ProjectSet
step(s). This results in "ERROR: ORDER/GROUP BY expression not found in
targetlist" during create_plan(), as reported by Rajkumar Raghuwanshi.
To fix, make this logic track the sortgroupref labeling of expressions,
not just their contents. This also restores the pre-v10 behavior that
separate GROUP BY expressions will be kept distinct even if they are
textually equal().
PostgreSQL 11 introduces compress method for SP-GiST opclasses. That
was mistakenly interpreted as compression support for SP-GiST while
actually that allows lossy representation of leaf keys.
Author: Alexander Korotkov, based on proposal by Darafei Praliaskouski
Discussion: https://postgr.es/m/CAC8Q8tKbYmNdiyWr7hE4GfMY4fbqHKkFziKgrUuWHH6HJQs3og%40mail.gmail.com
Alvaro Herrera [Wed, 20 Jun 2018 16:58:12 +0000 (12:58 -0400)]
Accept TEXT and CDATA nodes in XMLTABLE's column_expression.
Column expressions that match TEXT or CDATA nodes must return the
contents of the nodes themselves, not the content of non-existing
children (i.e. the empty string).
Author: Markus Winand Reported-by: Markus Winand Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/0684A598-002C-42A2-AE12-F024A324EAE4@winand.at
Amit Kapila [Wed, 20 Jun 2018 02:21:42 +0000 (07:51 +0530)]
Don't consider parallel append for parallel unsafe paths.
Commit ab72716778 allowed Parallel Append paths to be generated for a
relation that is not parallel safe. Prevent that from happening.
Initial analysis by Tom Lane.
Reported-by: Rajkumar Raghuwanshi
Author: Amit Kapila and Rajkumar Raghuwanshi Reviewed-by: Amit Khandekar and Robert Haas
Discussion:https://postgr.es/m/CAKcux6=tPJ6nJ08r__nU_pmLQiC0xY15Fn0HvG1Cprsjdd9s_Q@mail.gmail.com
Michael Paquier [Wed, 20 Jun 2018 01:42:25 +0000 (10:42 +0900)]
Clarify use of temporary tables within partition trees
Since their introduction, partition trees have been a bit lossy
regarding temporary relations. Inheritance trees respect the following
patterns:
1) a child relation can be temporary if the parent is permanent.
2) a child relation can be temporary if the parent is temporary.
3) a child relation cannot be permanent if the parent is temporary.
4) The use of temporary relations also imply that when both parent and
child need to be from the same sessions.
Partitions share many similar patterns with inheritance, however the
handling of the partition bounds make the situation a bit tricky for
case 1) as the partition code bases a lot of its lookup code upon
PartitionDesc which does not really look after relpersistence. This
causes for example a temporary partition created by session A to be
visible by another session B, preventing this session B to create an
extra partition which overlaps with the temporary one created by A with
a non-intuitive error message. There could be use-cases where mixing
permanent partitioned tables with temporary partitions make sense, but
that would be a new feature. Partitions respect 2), 3) and 4) already.
It is a bit depressing to see those error checks happening in
MergeAttributes() whose purpose is different, but that's left as future
refactoring work.
Back-patch down to 10, which is where partitioning has been introduced,
except that default partitions do not apply there. Documentation also
includes limitations related to the use of temporary tables with
partition trees.
Reported-by: David Rowley
Author: Amit Langote, Michael Paquier Reviewed-by: Ashutosh Bapat, Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f94Ojk0og9GMkRHGt8wHTW=ijq5KzJKuoBoqWLwSVwGmw@mail.gmail.com
Tom Lane [Tue, 19 Jun 2018 23:30:50 +0000 (19:30 -0400)]
Clarify the README files for the various separate TAP-based test suites.
Explain the difference between "make check" and "make installcheck".
Mention the need for --enable-tap-tests (only some of these did so
before). Standardize their wording about how to run the tests.
Michael Paquier [Tue, 19 Jun 2018 00:00:33 +0000 (09:00 +0900)]
Track new configure flags introduced for version 11 in pg_config.h.win32
The following set of flags mainly matter when building Postgres code
with MSVC and those have been forgotten with latest developments:
- HAVE_LDAP_INITIALIZE, added by 35c0754f, and marked as disabled.
ldap_initialize() is a non-standard extension that provides a way to use
"ldaps" with OpenLDAP, but it is not supported on Windows, and instead
the non-standard ldap_sslinit() is used if WIN32 is defined. Per input
from Thomas Munro.
- HAVE_X509_GET_SIGNATURE_NID, added by 054e8c6c, which is used by
SCRAM's channel binding tls-server-end-point. Having this flag disabled
would cause this channel binding type to be unsupported for Windows
builds.
- HAVE_SSL_CLEAR_OPTIONS, added recently as of a364dfa4 to disable SSL
compression.
- HAVE_ASN1_STRING_GET0_DATA, added by 5c6df67, which is used to track
a new compatibility with OpenSSL 1.1.0. This was missing from
pg_config.win32.h and is not enabled by default. HAVE_BIO_GET_DATA,
HAVE_OPENSSL_INIT_SSL and HAVE_BIO_METH_NEW gain the same treatment.
The second and third flags are enabled with this commit, which raises
the bar of OpenSSL support to 1.0.2 on Windows as a minimum. As this
is the LTS (long-time support) version of OpenSSL community and knowing
that all recent installers referred by OpenSSL upstream don't have
anymore 1.0.1 or older, we could live with that requirement. In order
to allow the code to compile with OpenSSL 1.1.0, all the flags mentioned
above need to be enabled in pg_config.h.win32.
Author: Michael Paquier Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20180529211559.GF6632@paquier.xyz
Tom Lane [Mon, 18 Jun 2018 19:55:06 +0000 (15:55 -0400)]
Fix contrib/hstore_plperl to look through scalar refs.
Bring this transform function into sync with the policy established
by commit 3a382983d.
Also, fix it to make sure that what it drills down to is indeed a
hash, and not some other kind of Perl SV. Previously, the test
cases added here provoked crashes.
Because of the crash hazard, back-patch to 9.5 where this module
was introduced.
Tom Lane [Mon, 18 Jun 2018 19:31:57 +0000 (15:31 -0400)]
Allow plperl_sv_to_datum to look through scalar refs.
There seems little reason for the policy of throwing error if we
find a ref to something other than a hash or array. Recursively
look through the ref, instead. This makes the behavior in non-transform
cases comparable to what was already instantiated for jsonb_plperl.
Note that because we invoke any available transform function before
considering the ref case, it's up to each transform function whether
it wants to play along with this behavior or do something different.
Because the previous behavior was just to throw a useless error,
this seems unlikely to create any compatibility issues. Still, given
the lack of field complaints so far, seems best not to back-patch.
projects / postgresql / log