Tom Lane [Thu, 3 Oct 2019 21:34:26 +0000 (17:34 -0400)]
Avoid unnecessary out-of-memory errors during encoding conversion.
Encoding conversion uses the very simplistic rule that the output
can't be more than 4X longer than the input, and palloc's a buffer
of that size. This results in failure to convert any string longer
than 1/4 GB, which is becoming an annoying limitation.
As a band-aid to improve matters, allow the allocated output buffer
size to exceed 1GB. We still insist that the final result fit into
MaxAllocSize (1GB), though. Perhaps it'd be safe to relax that
restriction, but it'd require close analysis of all callers, which
is daunting (not least because external modules might call these
functions). For the moment, this should allow a 2X to 4X improvement
in the longest string we can convert, which is a useful gain in
return for quite a simple patch.
Also, once we have successfully converted a long string, repalloc
the output down to the actual string length, returning the excess
to the malloc pool. This seems worth doing since we can usually
expect to give back several MB if we take this path at all.
This still leaves much to be desired, most notably that the assumption
that MAX_CONVERSION_GROWTH == 4 is very fragile, and yet we have no
guard code verifying that the output buffer isn't overrun. Fixing
that would require significant changes in the encoding conversion
APIs, so it'll have to wait for some other day.
The present patch seems safely back-patchable, so patch all supported
branches.
Tom Lane [Thu, 3 Oct 2019 17:56:26 +0000 (13:56 -0400)]
Allow repalloc() to give back space when a large chunk is downsized.
Up to now, if you resized a large (>8K) palloc chunk down to a smaller
size, aset.c made no attempt to return any space to the malloc pool.
That's unpleasant if a really large allocation is resized to a
significantly smaller size. I think no such cases existed when this
code was designed, and I'm not sure whether they're common even yet,
but an upcoming fix to encoding conversion will certainly create such
cases. Therefore, fix AllocSetRealloc so that it gives realloc()
a chance to do something with the block. This doesn't noticeably
increase complexity, we mostly just have to change the order in which
the cases are considered.
Andrew Gierth [Thu, 3 Oct 2019 09:54:52 +0000 (10:54 +0100)]
Selectively include window frames in expression walks/mutates.
query_tree_walker and query_tree_mutator were skipping the
windowClause of the query, without regard for the fact that the
startOffset and endOffset in a WindowClause node are expression trees
that need to be processed. This was an oversight in commit ec4be2ee6
from 2010 which added the expression fields; the main symptom is that
function parameters in window frame clauses don't work in inlined
functions.
Fix (as conservatively as possible since this needs to not break
existing out-of-tree callers) and add tests.
Backpatch all the way, since this has been broken since 9.0.
Per report from Alastair McKinley; fix by me with kibitzing and review
from Tom Lane.
Michael Paquier [Wed, 2 Oct 2019 06:54:11 +0000 (15:54 +0900)]
Remove temporary WAL and history files at the end of archive recovery
cbc55da has reworked the order of some actions at the end of archive
recovery. Unfortunately this overlooked the fact that the startup
process needs to remove RECOVERYXLOG (for temporary WAL segment newly
recovered from archives) and RECOVERYHISTORY (for temporary history
file) at this step, leaving the files around even after recovery ended.
The test name and the following test cases suggest the index created
should be hash index, but it forgot to add 'using hash' in the test case.
This in itself won't improve code coverage as there were some other tests
which were covering the corresponding code. However, it is better if the
added tests serve their actual purpose.
Reported-by: Paul A Jungwirth
Author: Paul A Jungwirth Reviewed-by: Mahendra Singh
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CA+renyV=Us-5XfMC25bNp-uWSj39XgHHmGE9Rh2cQKMegSj52g@mail.gmail.com
Michael Paquier [Wed, 25 Sep 2019 01:08:43 +0000 (10:08 +0900)]
Fix failure with lock mode used for custom relation options
In-core relation options can use a custom lock mode since 47167b7, that
has lowered the lock available for some autovacuum parameters. However
it forgot to consider custom relation options. This causes failures
with ALTER TABLE SET when changing a custom relation option, as its lock
is not defined. The existing APIs to define a custom reloption does not
allow to define a custom lock mode, so enforce its initialization to
AccessExclusiveMode which should be safe enough in all cases. An
upcoming patch will extend the existing APIs to allow a custom lock mode
to be defined.
The problem can be reproduced with bloom indexes, so add a test there.
Reported-by: Nikolay Sharplov Analyzed-by: Thomas Munro, Michael Paquier
Author: Michael Paquier Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
Backpatch-through: 9.6
Tom Lane [Mon, 23 Sep 2019 16:37:04 +0000 (12:37 -0400)]
Doc: clarify handling of duplicate elements in array containment tests.
The array <@ and @> operators do not worry about duplicates: if every
member of array X matches some element of array Y, then X is contained
in Y, even if several members of X get matched to the same Y member.
This was not explicitly stated in the docs though, so improve matters.
Tom Lane [Sun, 22 Sep 2019 21:46:00 +0000 (17:46 -0400)]
Fix failure to zero-pad the result of bitshiftright().
If the bitstring length is not a multiple of 8, we'd shift the
rightmost bits into the pad space, which must be zeroes --- bit_cmp,
for one, depends on that. This'd lead to the result failing to
compare equal to what it should compare equal to, as reported in
bug #16013 from Daryl Waycott.
This is, if memory serves, not the first such bug in the bitstring
functions. In hopes of making it the last one, do a bit more work
than minimally necessary to fix the bug:
* Add assertion checks to bit_out() and varbit_out() to complain if
they are given incorrectly-padded input. This will improve the
odds that manual testing of any new patch finds problems.
* Encapsulate the padding-related logic in macros to make it
easier to use.
Also, remove unnecessary padding logic from bit_or() and bitxor().
Somebody had already noted that we need not re-pad the result of
bit_and() since the inputs are required to be the same length,
but failed to extrapolate that to the other two.
Also, move a comment block that once was near the head of varbit.c
(but people kept putting other stuff in front of it), to put it in
the header block.
Note for the release notes: if anyone has inconsistent data as a
result of saving the output of bitshiftright() in a table, it's
possible to fix it with something like
UPDATE mytab SET bitcol = ~(~bitcol) WHERE bitcol != ~(~bitcol);
This has been broken since day one, so back-patch to all supported
branches.
Tom Lane [Fri, 20 Sep 2019 23:53:33 +0000 (19:53 -0400)]
Update time zone data files to tzdata release 2019c.
DST law changes in Fiji and Norfolk Island. Historical corrections
for Alberta, Austria, Belgium, British Columbia, Cambodia, Hong Kong,
Indiana (Perry County), Kaliningrad, Kentucky, Michigan, Norfolk
Island, South Korea, and Turkey.
During backpatch of 6cae9d2c10 Float8GetDatum() was accidentally removed. This
commit turns it back.
Reported-by: Erik Rijkers
Discussion: https://postgr.es/m/6d51305e1159241cabee132f7efc7eff%40xs4all.nl
Author: Tom Lane
Backpatch-through: from 11 to 9.5
Improve handling of NULLs in KNN-GiST and KNN-SP-GiST
This commit improves subject in two ways:
* It removes ugliness of 02f90879e7, which stores distance values and null
flags in two separate arrays after GISTSearchItem struct. Instead we pack
both distance value and null flag in IndexOrderByDistance struct. Alignment
overhead should be negligible, because we typically deal with at most few
"col op const" expressions in ORDER BY clause.
* It fixes handling of "col op NULL" expression in KNN-SP-GiST. Now, these
expression are not passed to support functions, which can't deal with them.
Instead, NULL result is implicitly assumed. It future we may decide to
teach support functions to deal with NULL arguments, but current solution is
bugfix suitable for backpatch.
Michael Paquier [Thu, 19 Sep 2019 04:19:14 +0000 (13:19 +0900)]
Doc: Fix incorrect mention to connection_object in CONNECT command of ECPG
This fixes an inconsistency with this parameter name not listed in the
command synopsis, and connection_name is the parameter name more
commonly used in the docs for ECPG commands.
Amit Kapila [Thu, 19 Sep 2019 03:35:11 +0000 (09:05 +0530)]
Doc: document autovacuum interruption.
It's important users be able to know (without looking at the source code)
that running DDL or DDL-like commands can interrupt autovacuum which can
lead to a lot of dead tuples and hence slower database operations.
Reported-by: James Coleman
Author: James Coleman Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAAaqYe-XYyNwML1=f=gnd0qWg46PnvD=BDrCZ5-L94B887XVxQ@mail.gmail.com
Doc: Update FDW documentation about direct foreign table modification.
1. Commit 7086be6e3 should have documented the limitation that the direct
modification is disabled when WCO constraints are present, but didn't,
which is definitely my fault. Update the documentation (Postgres 9.6
onwards).
2. Commit fc22b6623 should have documented the limitation that the direct
modification is disabled when generated columns are defined, but
didn't. Update the documentation (Postgres 12 onwards).
PostgreSQL has been unusable when built with xlc 13 and newer, which are
incompatible with our use of __fetch_and_add(). Back-patch to 9.5,
which introduced pg_atomic_fetch_add_u32().
logical decoding: process ASSIGNMENT during snapshot build
Most WAL records are ignored in early SnapBuild snapshot build phases.
But it's critical to process some of them, so that later messages have
the correct transaction state after the snapshot is completely built; in
particular, XLOG_XACT_ASSIGNMENT messages are critical in order for
sub-transactions to be correctly assigned to their parent transactions,
or at least one assert misbehaves, as reported by Ildar Musin.
Lack of parens in the definitions could cause a statement using these
macros to have unexpected semantics. In current code no bug is
apparent, but best to fix the definitions to avoid problems down the
line.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/19795.1568400476@sss.pgh.pa.us
Peter Geoghegan [Thu, 12 Sep 2019 22:45:01 +0000 (15:45 -0700)]
Fix nbtree page split rmgr desc routine.
Include newitemoff in rmgr desc output for nbtree page split records.
In passing, correct an obsolete comment that claimed that newitemoff is
only logged for _L variant nbtree page split WAL records.
Both issues were oversights in commit 2c03216d831, which revamped the
WAL format.
Author: Peter Geoghegan
Backpatch: 9.5-, where the WAL format was revamped.
Tom Lane [Thu, 12 Sep 2019 22:29:18 +0000 (18:29 -0400)]
Fix usage of whole-row variables in WCO and RLS policy expressions.
Since WITH CHECK OPTION was introduced, ExecInitModifyTable has
initialized WCO expressions with the wrong plan node as parent -- that is,
it passed its input subplan not the ModifyTable node itself. Up to now
we thought this was harmless, but bug #16006 from Vinay Banakar shows it's
not: if the input node is a SubqueryScan then ExecInitWholeRowVar can get
confused into doing the wrong thing. (The fact that ExecInitWholeRowVar
contains such logic is certainly a horrid kluge that doesn't deserve to
live, but figuring out another way to do that is a task for some other day.)
Andres had already noticed the wrong-parent mistake and fixed it in commit 148e632c0, but not being aware of any user-visible consequences, he quite
reasonably didn't back-patch. This patch is simply a back-patch of 148e632c0, plus addition of a test case based on bug #16006. I also added
the test case to v12/HEAD, even though the bug is already fixed there.
Back-patch to all supported branches. 9.4 lacks RLS policies so the
new test case doesn't work there, but I'm pretty sure a test could be
devised based on using a whole-row Var in a plain WITH CHECK OPTION
condition. (I lack the cycles to do so myself, though.)
Remove pg_trgm.strict_word_similarity_threshold doc from 9.6 and 10
9ee98cc3f added missing doc for pg_trgm.strict_word_similarity_threshold GUC.
But it was accidentally backpatched to 9.6, while this GUC was introduced only
in 11. This patch removes extra doc from 9.6 and 10.
Discussion: https://postgr.es/m/CAHE3wghn%3DRyPWY-nxX1SiYAfkuwLHMd9Z4r8v9ww_jSs1jF5pg%40mail.gmail.com
Author: Euler Taveira
Backpatch-through: 9.6 and 10
Amit Kapila [Wed, 11 Sep 2019 04:55:49 +0000 (10:25 +0530)]
Doc: Update PL/pgSQL sample function in plpgsql.sgml.
The example used to explain 'Looping Through Query Results' uses
pseudo-materialized views. Replace it with a more up-to-date example
which does the same thing with actual materialized views, which have
been available since PostgreSQL 9.3.
In the passing, change '%' as format specifier instead of '%s' as is used
in other examples in plpgsql.sgml.
Reported-by: Ian Barwick
Author: Ian Barwick Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/9a70d393-7904-4918-c97c-649f6d114b6a@2ndquadrant.com
Michael Paquier [Wed, 11 Sep 2019 02:07:39 +0000 (11:07 +0900)]
Expand properly list of TAP tests used for prove in vcregress.pl
Depending on the system used, t/*.pl may not be expanded into a list of
tests which can be consumed by prove when attempting to run TAP tests on
a given path. Fix that by using glob() directly in the script, to make
sure that a complete list of tests is provided. This has not proved to
be an issue with MSVC as the list was properly expanded, but it is on
Linux with perl's system().
This is extracted from a larger patch.
Author: Tom Lane
Discussion: https://postgr.es/m/6628.1567958876@sss.pgh.pa.us
Backpatch-through: 9.4
Tom Lane [Tue, 10 Sep 2019 16:45:32 +0000 (12:45 -0400)]
Sync isolationtester's handling of notice/warning messages with HEAD.
Back-patch relevant parts of these commits: 30717637c Fix isolationtester race condition for notices sent before blocking ebd499282 Don't drop NOTICE messages in isolation tests a28e10e82 Indicate session name in isolationtester notices
This ensures that older versions of the isolationtester will handle
NOTICE/WARNING messages the same way as HEAD and v12 do. While this
isn't fixing any critical problem right now, it seems like a prudent
change to prevent surprises (like we had yesterday...) with
back-patches of future isolation test changes.
Back-patch as far as 9.6. Due to the significant changes we made in
isolationtester in 9.6, back-patching isolation tests further than
that is going to be risky anyway; besides, this patch doesn't apply
cleanly before that.
Andrew Dunstan [Mon, 9 Sep 2019 12:56:33 +0000 (08:56 -0400)]
Prevent msys2 conversion of "cmd /c" switch to a file path
Modern versions of msys2 have changed the treatment of "cmd /c" so that
the runtime will try to convert the switch to a native file path. This
patch adds a setting to inhibit that behaviour.
Tom Lane [Sun, 8 Sep 2019 21:00:29 +0000 (17:00 -0400)]
Fix RelationIdGetRelation calls that weren't bothering with error checks.
Some of these are quite old, but that doesn't make them not bugs.
We'd rather report a failure via elog than SIGSEGV.
While at it, uniformly spell the error check as !RelationIsValid(rel)
rather than a bare rel == NULL test. The machine code is the same
but it seems better to be consistent.
Coverity complained about this today, not sure why, because the
mistake is in fact old.
In order to implement NULL LAST semantic GiST previously assumed distance to
the NULL value to be Inf. However, our distance functions can return Inf and
NaN for non-null values. In such cases, NULL LAST semantic appears to be
broken. This commit fixes that by introducing separate array of null flags for
distances.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/CAPpHfdsNvNdA0DBS%2BwMpFrgwT6C3-q50sFVGLSiuWnV3FqOJuQ%40mail.gmail.com
Author: Alexander Korotkov
Backpatch-through: 9.4
Fix handling Inf and Nan values in GiST pairing heap comparator
Previously plain float comparison was used in GiST pairing heap. Such
comparison doesn't provide proper ordering for value sets containing Inf and Nan
values. This commit fixes that by usage of float8_cmp_internal(). Note, there
is remaining problem with NULL distances, which are represented as Inf in
pairing heap. It would be fixes in subsequent commit.
Backpatch to all supported versions.
Reported-by: Andrey Borodin
Discussion: https://postgr.es/m/CAPpHfdsNvNdA0DBS%2BwMpFrgwT6C3-q50sFVGLSiuWnV3FqOJuQ%40mail.gmail.com
Author: Alexander Korotkov Reviewed-by: Heikki Linnakangas
Backpatch-through: 9.4
Tom Lane [Sun, 8 Sep 2019 17:45:13 +0000 (13:45 -0400)]
configure: Update python search order
Some systems don't ship with "python" by default anymore, only
"python3" or "python2" or some combination, so include those in the
configure search.
Back-patch of commit 7291733ac. At the time that was only pushed
back as far as v10, because of concerns about interactions with
commit b21c569ce. Closer analysis shows that if we just
s/AC_PATH_PROG/AC_PATH_PROGS/, there is no effect on the older
branches' behavior when PYTHON is explicitly specified, so it should
be okay to back-patch: this will not break any configuration that
worked before. And the need to support platforms with only a
"python3" or "python2" executable is getting ever more urgent.
Original patch by Peter Eisentraut, back-patch analysis by me
Robert Haas [Fri, 6 Sep 2019 12:22:32 +0000 (08:22 -0400)]
When performing a base backup, check for read errors.
The old code didn't differentiate between a read error and a
concurrent truncation. fread reports both of these by returning 0;
you have to use feof() or ferror() to distinguish between them,
which this code did not do.
It might be a better idea to use read() rather than fread() here,
so that we can display a less-generic error message, but I'm not
sure that would qualify as a back-patchable bug fix, so just do
this much for now.
Jeevan Chalke, reviewed by Jeevan Ladhe and by me.
Michael Paquier [Wed, 4 Sep 2019 06:47:01 +0000 (15:47 +0900)]
Fix thinko when ending progress report for a backend
The logic ending progress reporting for a backend entry introduced by b6fb647 causes callers of pgstat_progress_end_command() to do some extra
work when track_activities is enabled as the process fields are reset in
the backend entry even if no command were started for reporting.
This resets the fields only if a command is registered for progress
reporting, and only if track_activities is enabled.
Tom Lane [Mon, 2 Sep 2019 18:02:46 +0000 (14:02 -0400)]
Handle corner cases correctly in psql's reconnection logic.
After an unexpected connection loss and successful reconnection,
psql neglected to resynchronize its internal state about the server,
such as server version. Ordinarily we'd be reconnecting to the same
server and so this isn't really necessary, but there are scenarios
where we do need to update --- one example is where we have a list
of possible connection targets and they're not all alike.
Define "resynchronize" as including connection_warnings(), so that
this case acts the same as \connect. This seems useful; for example,
if the server version did change, the user might wish to know that.
An attuned user might also notice that the new connection isn't
SSL-encrypted, for example, though this approach isn't especially
in-your-face about such changes. Although this part is a behavioral
change, it only affects interactive sessions, so it should not break
any applications.
Also, in do_connect, make sure that we desynchronize correctly when
abandoning an old connection in non-interactive mode.
These problems evidently are the result of people patching only one
of the two places where psql deals with connection changes, so insert
some cross-referencing comments in hopes of forestalling future bugs
of the same ilk.
Lastly, in Windows builds, issue codepage mismatch warnings only at
startup, not during reconnections. psql's codepage can't change
during a reconnect, so complaining about it again seems like useless
noise.
Peter Billen and Tom Lane. Back-patch to all supported branches.
Fix overflow check and comment in GIN posting list encoding.
The comment did not match what the code actually did for integers with
the 43rd bit set. You get an integer like that, if you have a posting
list with two adjacent TIDs that are more than 2^31 blocks apart.
According to the comment, we would store that in 6 bytes, with no
continuation bit on the 6th byte, but in reality, the code encodes it
using 7 bytes, with a continuation bit on the 6th byte as normal.
The decoding routine also handled these 7-byte integers correctly, except
for an overflow check that assumed that one integer needs at most 6 bytes.
Fix the overflow check, and fix the comment to match what the code
actually does. Also fix the comment that claimed that there are 17 unused
bits in the 64-bit representation of an item pointer. In reality, there
are 64-32-11=21.
Fitting any item pointer into max 6 bytes was an important property when
this was written, because in the old pre-9.4 format, item pointers were
stored as plain arrays, with 6 bytes for every item pointer. The maximum
of 6 bytes per integer in the new format guaranteed that we could convert
any page from the old format to the new format after upgrade, so that the
new format was never larger than the old format. But we hardly need to
worry about that anymore, and running into that problem during upgrade,
where an item pointer is expanded from 6 to 7 bytes such that the data
doesn't fit on a page anymore, is implausible in practice anyway.
Backpatch to all supported versions.
This also includes a little test module to test these large distances
between item pointers, without requiring a 16 TB table. It is not
backpatched, I'm including it more for the benefit of future development
of new posting list formats.
Discussion: https://www.postgresql.org/message-id/33bfc20a-5c86-f50c-f5a5-58e9925d05ff%40iki.fi Reviewed-by: Masahiko Sawada, Alexander Korotkov
Michael Paquier [Wed, 28 Aug 2019 02:48:29 +0000 (11:48 +0900)]
Disable timeouts when running pg_rewind with online source cluster
In this case, the transfer uses a libpq connection, which is subject to
the timeout parameters set at system level, and this can make the rewind
operation suddenly canceled which is not good for automation. One
workaround to such issues would be to use PGOPTIONS to enforce the
wanted timeout parameters, but that's annoying, and for example pg_dump,
which can run potentially long-running queries disables all types of
timeouts.
lock_timeout and statement_timeout are the ones which can cause problems
now. Note that pg_rewind does not use transactions, so disabling
idle_in_transaction_session_timeout is optional, but it feels safer to
do so for the future.
This is back-patched down to 9.5. idle_in_transaction_session_timeout
is only present since 9.6.
Author: Alexander Kukushkin
Discussion: https://postgr.es/m/CAFh8B=krcVXksxiwVQh1SoY+ziJ-JC=6FcuoBL3yce_40Es5_g@mail.gmail.com
Backpatch-through: 9.5
Tom Lane [Tue, 27 Aug 2019 20:37:22 +0000 (16:37 -0400)]
Doc: clarify behavior of standard aggregates for null inputs.
Section 4.2.7 says that unless otherwise specified, built-in
aggregates ignore rows in which any input is null. This is
not true of the JSON aggregates, but it wasn't documented.
Fix that.
Of the other entries in table 9.55, some were explicit about
ignoring nulls, and some weren't; for consistency and
self-contained-ness, make them all say it explicitly.
Per bug #15884 from Tim Möhlmann. Back-patch to all supported
branches.
Tom Lane [Tue, 27 Aug 2019 18:44:26 +0000 (14:44 -0400)]
Reject empty names and recursion in config-file include directives.
An empty file name or subdirectory name leads join_path_components() to
just produce the parent directory name, which leads to weird failures or
recursive inclusions. Let's throw a specific error for that. It takes
only slightly more code to detect all-blank names, so do so.
Also, detect direct recursion, ie a file calling itself. As coded
this will also detect recursion via "include_dir '.'", which is
perhaps more likely than explicitly including the file itself.
Detecting indirect recursion would require API changes for guc-file.l
functions, which seems not worth it since extensions might call them.
The nesting depth limit will catch such cases eventually, just not
with such an on-point error message.
In passing, adjust the example usages in postgresql.conf.sample
to perhaps eliminate the problem at the source: there's no reason
for the examples to suggest that an empty value is valid.
Per a trouble report from Brent Bates. Back-patch to 9.5; the
issue is old, but the code in 9.4 is enough different that the
patch doesn't apply easily, and it doesn't seem worth the trouble
to fix there.
Michael Paquier [Tue, 27 Aug 2019 00:12:10 +0000 (09:12 +0900)]
Fix failure of --jobs with vacuumdb on Windows
FD_SETSIZE needs to be declared before winsock2.h, or it is possible to
run into buffer overflow issues when using --jobs. This is similar to
pgbench's solution done in a23c641.
This has been introduced by 71d84ef, and older versions have been using
the default value of FD_SETSIZE, defined at 64. While on it, add a
missing newline to the previously-added error message.
Per buildfarm member jacana, but this impacts all Windows animals
running the TAP tests. I have reproduced the failure locally to check
the patch.
Author: Michael Paquier Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20190826054000.GE7005@paquier.xyz
Backpatch-through: 9.5
Andrew Dunstan [Mon, 26 Aug 2019 11:44:34 +0000 (07:44 -0400)]
Treat MINGW and MSYS the same in pg_upgrade test script
On msys2, 'uname -s' reports a string starting MSYS instead on MINGW
as happens on msys1. Treat these both the same way. This reverts 608a710195a4b in favor of a more general solution.
Michael Paquier [Mon, 26 Aug 2019 02:14:39 +0000 (11:14 +0900)]
Fix error handling of vacuumdb when running out of fds
When trying to use a high number of jobs, vacuumdb has only checked for
a maximum number of jobs used, causing confusing failures when running
out of file descriptors when the jobs open connections to Postgres.
This commit changes the error handling so as we do not check anymore for
a maximum number of allowed jobs when parsing the option value with
FD_SETSIZE, but check instead if a file descriptor is within the
supported range when opening the connections for the jobs so as this is
detected at the earliest time possible.
Also, improve the error message to give a hint about the number of jobs
recommended, using a wording given by the reviewers of the patch.
Reported-by: Andres Freund
Author: Michael Paquier Reviewed-by: Andres Freund, Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20190818001858.ho3ev4z57fqhs7a5@alap3.anarazel.de
Backpatch-through: 9.5
Tom Lane [Sun, 25 Aug 2019 19:04:04 +0000 (15:04 -0400)]
Avoid platform-specific null pointer dereference in psql.
POSIX permits getopt() to advance optind beyond argc when the last
argv entry is an option that requires an argument and hasn't got one.
It seems that no major platforms actually do that, but musl does,
so that something like "psql -f" would crash with that libc.
Add a check that optind is in range before trying to look at the
possibly-bogus option.
Report and fix by Quentin Rameau. Back-patch to all supported
branches.
Alvaro Herrera [Wed, 21 Aug 2019 15:12:44 +0000 (11:12 -0400)]
Fix typo
In early development patches, "replication origins" were called "identifiers";
almost everything was renamed, but these references to the old terminology
went unnoticed.
Tom Lane [Sun, 18 Aug 2019 21:11:58 +0000 (17:11 -0400)]
Disallow changing an inherited column's type if not all parents changed.
If a table inherits from multiple unrelated parents, we must disallow
changing the type of a column inherited from multiple such parents, else
it would be out of step with the other parents. However, it's possible
for the column to ultimately be inherited from just one common ancestor,
in which case a change starting from that ancestor should still be
allowed. (I would not be excited about preserving that option, were
it not that we have regression test cases exercising it already ...)
It's slightly annoying that this patch looks different from the logic
with the same end goal in renameatt(), and more annoying that it
requires an extra syscache lookup to make the test. However, the
recursion logic is quite different in the two functions, and a
back-patched bug fix is no place to be trying to unify them.
Per report from Manuel Rigger. Back-patch to 9.5. The bug exists in
9.4 too (and doubtless much further back); but the way the recursion
is done in 9.4 is a good bit different, so that substantial refactoring
would be needed to fix it in 9.4. I'm disinclined to do that, or risk
introducing new bugs, for a bug that has escaped notice for this long.
Tom Lane [Fri, 16 Aug 2019 00:04:19 +0000 (20:04 -0400)]
Prevent possible double-free when update trigger returns old tuple.
This is a variant of the problem fixed in commit 25b692568, which
unfortunately we failed to detect at the time. If an update trigger
returns the "old" tuple, as it's entitled to do, then a subsequent
iteration of the loop in ExecBRUpdateTriggers would have "oldtuple"
equal to "trigtuple" and would fail to notice that it shouldn't
free that.
In addition to fixing the code, extend the test case added by 25b692568 so that it covers multiple-trigger-iterations cases.
This problem does not manifest in v12/HEAD, as a result of the
relevant code having been largely rewritten for slotification.
However, include the test case into v12/HEAD anyway, since this
is clearly an area that someone could break again in future.
Per report from Piotr Gabriel Kosinski. Back-patch into all
supported branches, since the bug seems quite old.
Diagnosis and code fix by Thomas Munro, test case by me.
Tom Lane [Wed, 14 Aug 2019 19:09:20 +0000 (15:09 -0400)]
Fix ALTER SYSTEM to cope with duplicate entries in postgresql.auto.conf.
ALTER SYSTEM itself normally won't make duplicate entries (although
up till this patch, it was possible to confuse it by writing case
variants of a GUC's name). However, if some external tool has appended
entries to the file, that could result in duplicate entries for a single
GUC name. In such a situation, ALTER SYSTEM did exactly the wrong thing,
because it replaced or removed only the first matching entry, leaving
the later one(s) still there and hence still determining the active value.
This patch fixes that by making ALTER SYSTEM sweep through the file and
remove all matching entries, then (if not ALTER SYSTEM RESET) append the
new setting to the end. This means entries will be in order of last
setting rather than first setting, but that shouldn't hurt anything.
Also, make the comparisons case-insensitive so that the right things
happen if you do, say, ALTER SYSTEM SET "TimeZone" = 'whatever'.
This has been broken since ALTER SYSTEM was invented, so back-patch
to all supported branches.
Tom Lane [Tue, 13 Aug 2019 20:57:59 +0000 (16:57 -0400)]
Un-break pg_dump for pre-8.3 source servers.
Commit 07b39083c inserted an unconditional reference to pg_opfamily,
which of course fails on servers predating that catalog. Fortunately,
the case it's trying to solve can't occur on such old servers (AFAIK).
Hence, just skip the additional code when the source predates 8.3.
Per bug #15955 from sly. Back-patch to all supported branches,
like the previous patch.
Peter Eisentraut [Mon, 12 Aug 2019 19:20:14 +0000 (21:20 +0200)]
Fix compiler warning
With some newer gcc versions (8 and 9) you get a -Wformat-overflow
warning here. In PG11 and later this was already fixed. Since it's
trivial, backport it to get the older branches building without
warnings.
Tom Lane [Wed, 7 Aug 2019 22:09:28 +0000 (18:09 -0400)]
Doc: document permissions required for ANALYZE.
VACUUM's reference page had this text, but ANALYZE's didn't. That's
a clear oversight given that section 5.7 explicitly delegates the
responsibility to define permissions requirements to the individual
commands' man pages.
Per gripe from Isaac Morland. Back-patch to all supported branches.
In serializable mode, heap_hot_search_buffer() incorrectly acquired a
predicate lock on the root tuple, not the returned tuple that satisfied
the visibility checks. As explained in README-SSI, the predicate lock does
not need to be copied or extended to other tuple versions, but for that to
work, the correct, visible, tuple version must be locked in the first
place.
The original SSI commit had this bug in it, but it was fixed back in 2013,
in commit 81fbbfe335. But unfortunately, it was reintroduced a few months
later in commit b89e151054. Wising up from that, add a regression test
to cover this, so that it doesn't get reintroduced again. Also, move the
code that sets 't_self', so that it happens at the same time that the
other HeapTuple fields are set, to make it more clear that all the code in
the loop operate on the "current" tuple in the chain, not the root tuple.
Bug spotted by Andres Freund, analysis and original fix by Thomas Munro,
test case and some additional changes to the fix by Heikki Linnakangas.
Backpatch to all supported versions (9.4).
Michael Paquier [Wed, 7 Aug 2019 09:17:52 +0000 (18:17 +0900)]
Fix some incorrect parsing of time with time zone strings
When parsing a timetz string with a dynamic timezone abbreviation or a
timezone not specified, it was possible to generate incorrect timestamps
based on a date which uses some non-initialized variables if the input
string did not specify fully a date to parse. This is already checked
when a full timezone spec is included in the input string, but the two
other cases mentioned above missed the same checks.
This gets fixed by generating an error as this input is invalid, or in
short when a date is not fully specified.
Valgrind was complaining about this problem.
Bug: #15910
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15910-2eba5106b9aa0c61@postgresql.org
Backpatch-through: 9.4
Tom Lane [Tue, 6 Aug 2019 22:04:51 +0000 (18:04 -0400)]
Fix intarray's GiST opclasses to not fail for empty arrays with <@.
contrib/intarray considers "arraycol <@ constant-array" to be indexable,
but its GiST opclass code fails to reliably find index entries for empty
array values (which of course should trivially match such queries).
This is because the test condition to see whether we should descend
through a non-leaf node is wrong.
Unfortunately, empty array entries could be anywhere in the index,
as these index opclasses are currently designed. So there's no way
to fix this except by lobotomizing <@ indexscans to scan the whole
index ... which is what this patch does. That's pretty unfortunate:
the performance is now actually worse than a seqscan, in most cases.
We'd be better off to remove <@ from the GiST opclasses entirely,
and perhaps a future non-back-patchable patch will do so.
In the meantime, applications whose performance is adversely impacted
have a couple of options. They could switch to a GIN index, which
doesn't have this bug, or they could replace "arraycol <@ constant-array"
with "arraycol <@ constant-array AND arraycol && constant-array".
That will provide about the same performance as before, and it will find
all non-empty subsets of the given constant-array, which is all that
could reliably be expected of the query before.
While at it, add some more regression test cases to improve code
coverage of contrib/intarray.
In passing, adjust resize_intArrayType so that when it's returning an
empty array, it uses construct_empty_array for that rather than
cowboy hacking on the input array. While the hack produces an array
that looks valid for most purposes, it isn't bitwise equal to empty
arrays produced by other code paths, which could have subtle odd
effects. I don't think this code path is performance-critical
enough to justify such shortcuts. (Back-patch this part only as far
as v11; before commit 01783ac36 we were not careful about this in
other intarray code paths either.)
Back-patch the <@ fixes to all supported versions, since this was
broken from day one.
Patch by me; thanks to Alexander Korotkov for review.
Noah Misch [Mon, 5 Aug 2019 14:48:41 +0000 (07:48 -0700)]
Require the schema qualification in pg_temp.type_name(arg).
Commit aa27977fe21a7dfa4da4376ad66ae37cb8f0d0b5 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Michael Paquier [Thu, 1 Aug 2019 00:38:20 +0000 (09:38 +0900)]
Fix handling of previous password hooks in passwordcheck
When piling up loading of modules using check_password_hook_type,
loading passwordcheck would remove any trace of a previously-loaded
hook. Unloading the module would also cause previous hooks to be
entirely gone.
Reported-by: Rafael Castro
Author: Michael Paquier Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/15932-78f48f9ef166778c@postgresql.org
Backpatch-through: 9.4
Tom Lane [Wed, 31 Jul 2019 19:42:50 +0000 (15:42 -0400)]
Fix pg_dump's handling of dependencies for custom opclasses.
Since pg_dump doesn't treat the member operators and functions of operator
classes/families (that is, the pg_amop and pg_amproc entries, not the
underlying operators/functions) as separate dumpable objects, it missed
their dependency information. I think this was safe when the code was
designed, because the default object sorting rule emits operators and
functions before opclasses, and there were no dependency types that could
mess that up. However, the introduction of range types in 9.2 broke it:
now a type can have a dependency on an opclass, allowing dependency rules
to push the opclass before the type and hence before custom operators.
Lacking any information showing that it shouldn't do so, pg_dump emitted
the objects in the wrong order.
Fix by teaching getDependencies() to translate pg_depend entries for
pg_amop/amproc rows to look like dependencies for their parent opfamily.
I added a regression test for this in HEAD/v12, but not further back;
life is too short to fight with 002_pg_dump.pl.
Per bug #15934 from Tom Gottfried. Back-patch to all supported branches.
Print WAL position correctly in pg_rewind error message.
This has been wrong ever since pg_rewind was added. The if-branch just
above this, where we print the same error with an extra message supplied
by XLogReadRecord() got this right, but the variable name was wrong in the
else-branch. As a consequence, the error printed the WAL position as
0/0 if there was an error reading a WAL file.
Tom Lane [Mon, 29 Jul 2019 22:49:04 +0000 (18:49 -0400)]
Fix busted logic for parallel lock grouping in TopoSort().
A "break" statement erroneously left behind by commit a1c1af2a1
caused TopoSort to do the wrong thing if a lock's wait list
contained multiple members of the same locking group.
Because parallel workers don't normally need any locks not already
taken by their leader, this is very hard --- maybe impossible ---
to hit in production. Still, if it did happen, the queries involved
in an otherwise-resolvable deadlock would block until canceled.
In addition to removing the bogus "break", add an Assert showing
that the conflicting uses of the beforeConstraints[] array (for both
counts and flags) don't overlap, and add some commentary explaining
why not; because it's not obvious without explanation, IMHO.
Original report and patch from Rui Hai Jiang; additional assert
and commentary by me. Back-patch to 9.6 where the bug came in.
Tom Lane [Fri, 26 Jul 2019 17:07:08 +0000 (13:07 -0400)]
Tweak our special-case logic for the IANA "Factory" timezone.
pg_timezone_names() tries to avoid showing the "Factory" zone in
the view, mainly because that has traditionally had a very long
"abbreviation" such as "Local time zone must be set--see zic manual page",
so that showing it messes up psql's formatting of the whole view.
Since tzdb version 2016g, IANA instead uses the abbreviation "-00",
which is sane enough that there's no reason to discriminate against it.
On the other hand, it emerges that FreeBSD and possibly other packagers
are so wedded to backwards compatibility that they hack the IANA data
to keep the old spelling --- and not just that old spelling, but even
older spellings that IANA used back in the stone age. This caused the
filter logic to fail to suppress "Factory" at all on such platforms,
though the formatting problem is definitely real in that case.
To solve both problems, get rid of the hard-wired assumption about
exactly what Factory's abbreviation is, and instead reject abbreviations
exceeding 31 characters. This will allow Factory to appear in the view
if and only if it's using the modern abbreviation.
In passing, simplify the code we add to zic.c to support "zic -P"
to remove its now-obsolete hacks to not print the Factory zone's
abbreviation. Unlike pg_timezone_names(), there's no reason for
that code to support old/nonstandard timezone data.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Tom Lane [Fri, 26 Jul 2019 16:45:32 +0000 (12:45 -0400)]
Avoid choosing "localtime" or "posixrules" as TimeZone during initdb.
Some platforms create a file named "localtime" in the system
timezone directory, making it a copy or link to the active time
zone file. If Postgres is built with --with-system-tzdata, initdb
will see that file as an exact match to localtime(3)'s behavior,
and it may decide that "localtime" is the most preferred spelling of
the active zone. That's a very bad choice though, because it's
neither informative, nor portable, nor stable if someone changes
the system timezone setting. Extend the preference logic added by
commit e3846a00c so that we will prefer any other zone file that
matches localtime's behavior over "localtime".
On the same logic, also discriminate against "posixrules", which
is another not-really-a-zone file that is often present in the
timezone directory. (Since we install "posixrules" but not
"localtime", this change can affect the behavior of Postgres
with or without --with-system-tzdata.)
Note that this change doesn't prevent anyone from choosing these
pseudo-zones if they really want to (i.e., by setting TZ for initdb,
or modifying the timezone GUC later on). It just prevents initdb
from preferring these zone names when there are multiple matches to
localtime's behavior.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Tom Lane [Fri, 26 Jul 2019 15:59:00 +0000 (11:59 -0400)]
Fix loss of fractional digits for large values in cash_numeric().
Money values exceeding about 18 digits (depending on lc_monetary)
could be inaccurately converted to numeric, due to select_div_scale()
deciding it didn't need to compute any fractional digits. Force
its hand by setting the dscale of one division input to equal the
number of fractional digits we need.
In passing, rearrange the logic to not do useless work in locales
where money values are considered integral.
Per bug #15925 from Slawomir Chodnicki. Back-patch to all supported
branches.
Tom Lane [Thu, 25 Jul 2019 16:10:55 +0000 (12:10 -0400)]
Fix failures to ignore \r when reading Windows-style newlines.
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Andrew Dunstan [Thu, 25 Jul 2019 15:24:23 +0000 (11:24 -0400)]
Honor MSVC WindowsSDKVersion if set
Add a line to the project file setting the target SDK. Otherwise, in for
example VS2017, if the default but optional 8.1 SDK is not installed the
build will fail.
Tom Lane [Thu, 25 Jul 2019 15:02:43 +0000 (11:02 -0400)]
Fix contrib/sepgsql test policy to work with latest SELinux releases.
As of Fedora 30, it seems that the system-provided macros for setting
up user privileges in SELinux policies don't grant the ability to read
/etc/passwd, as they formerly did. This restriction breaks psql
(which tries to use getpwuid() to obtain the user name it's running
under) and thereby the contrib/sepgsql regression test. Add explicit
specifications that we need the right to read /etc/passwd.
Mike Palmiotto, per a report from me. Back-patch to all supported
branches.
Michael Paquier [Wed, 24 Jul 2019 02:26:52 +0000 (11:26 +0900)]
Doc: Clarify interactions of pg_receivexlog with remote_apply
Using pg_receivexlog with synchronous_commit = remote_apply set in the
backend is incompatible if pg_receivexlog is a synchronous standby as it
never applies WAL, so document this problem and solutions to it.
Backpatch to 9.6, where remote_apply has been added.
Author: Robert Haas, Jesper Pedersen Reviewed-by: Laurenz Albe, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/1427a2d3-1e51-9335-1931-4f8853d90d5e@redhat.com
Backpatch-through: 9.6
Michael Paquier [Wed, 24 Jul 2019 01:54:39 +0000 (10:54 +0900)]
Improve stability of TAP test for synchronous replication
Slow buildfarm machines have run into issues with this TAP test caused
by a race condition related to the startup of a set of standbys, where
it is possible to finish with an unexpected order in the WAL sender
array of the primary.
This closes the race condition by making sure that any standby started
is registered into the WAL sender array of the primary before starting
the next one based on lookups of pg_stat_replication.
Backpatch down to 9.6 where the test has been introduced.
Jeff Davis [Thu, 18 Jul 2019 23:53:17 +0000 (16:53 -0700)]
Fix daterange canonicalization for +/- infinity.
The values 'infinity' and '-infinity' are a part of the DATE type
itself, so a bound of the date 'infinity' is not the same as an
unbounded/infinite range. However, it is still wrong to try to
canonicalize such values, because adding or subtracting one has no
effect. Fix by treating 'infinity' and '-infinity' the same as
unbounded ranges for the purposes of canonicalization (but not other
purposes).
Backpatch to all versions because it is inconsistent with the
documented behavior. Note that this could be an incompatibility for
applications relying on the behavior contrary to the documentation.
Author: Laurenz Albe Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/77f24ea19ab802bc9bc60ddbb8977ee2d646aec1.camel%40cybertec.at
Backpatch-through: 9.4
Tom Lane [Wed, 17 Jul 2019 22:26:24 +0000 (18:26 -0400)]
Sync our copy of the timezone library with IANA release tzcode2019b.
A large fraction of this diff is just due to upstream's somewhat
random decision to rename a bunch of internal variables and struct
fields. However, there is an interesting new feature in zic:
it's grown a "-b slim" option that emits zone files without 32-bit
data and other backwards-compatibility hacks. We should consider
whether we wish to enable that.
Tom Lane [Tue, 16 Jul 2019 22:17:47 +0000 (18:17 -0400)]
Fix thinko in construction of old_conpfeqop list.
This should lappend the OIDs, not lcons them; the existing code produced
a list in reversed order. This is harmless for single-key FKs or FKs
where all the key columns are of the same type, which probably explains
how it went unnoticed. But if those conditions are not met,
ATAddForeignKeyConstraint would make the wrong decision about whether an
existing FK needs to be revalidated. I think it would almost always err
in the safe direction by revalidating a constraint that didn't need it.
You could imagine scenarios where the pfeqop check was fooled by
swapping the types of two FK columns in one ALTER TABLE, but that case
would probably be rejected by other tests, so it might be impossible to
get to the worst-case scenario where an FK should be revalidated and
isn't. (And even then, it's likely to be fine, unless there are weird
inconsistencies in the equality behavior of the replacement types.)
However, this is a performance bug at least.
Noted while poking around to see whether lcons calls could be converted
to lappend.
This bug is old, dating to commit cb3a7c2b9, so back-patch to all
supported branches.
Michael Paquier [Wed, 10 Jul 2019 06:15:18 +0000 (15:15 +0900)]
Fix variable initialization when using buffering build with GiST
This can cause valgrind to complain, as the flag marking a buffer as a
temporary copy was not getting initialized.
While on it, fill in with zeros newly-created buffer pages. This does
not matter when loading a block from a temporary file, but it makes the
push of an index tuple into a new buffer page safer.
This has been introduced by 1d27dcf, so backpatch all the way down to
9.4.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15899-0d24fb273b3dd90c@postgresql.org
Backpatch-through: 9.4
David Rowley [Wed, 3 Jul 2019 11:46:26 +0000 (23:46 +1200)]
Don't remove surplus columns from GROUP BY for inheritance parents
d4c3a156c added code to remove columns that were not part of a table's
PRIMARY KEY constraint from the GROUP BY clause when all the primary key
columns were present in the group by. This is fine to do since we know
that there will only be one row per group coming from this relation.
However, the logic failed to consider inheritance parent relations. These
can have child relations without a primary key, but even if they did, they
could duplicate one of the parent's rows or one from another child
relation. In this case, those additional GROUP BY columns are required.
Fix this by disabling the optimization for inheritance parent tables.
In v11 and beyond, partitioned tables are fine since partitions cannot
overlap and before v11 partitioned tables could not have a primary key.
Reported-by: Manuel Rigger
Discussion: http://postgr.es/m/CA+u7OA7VLKf_vEr6kLF3MnWSA9LToJYncgpNX2tQ-oWzYCBQAw@mail.gmail.com
Backpatch-through: 9.6
Michael Paquier [Tue, 2 Jul 2019 23:58:17 +0000 (08:58 +0900)]
Add support for Visual Studio 2019 in build scripts
This adjusts the documentation and the scripts related to the versions
of Windows SDK supported.
Author: Haribabu Kommi Reviewed-by: Andrew Dunstan, Juan José Santamaría Flecha, Michael
Paquier
Discussion: https://postgr.es/m/CAJrrPGcfqXhfPyMrny9apoDU7M1t59dzVAvoJ9AeAh5BJi+UzA@mail.gmail.com
Backpatch-through: 9.4
Tom Lane [Tue, 2 Jul 2019 17:35:14 +0000 (13:35 -0400)]
Fix tab completion of "SET variable TO|=" to not offer bogus completions.
Don't think that the context "UPDATE tab SET var =" is a GUC-setting
command.
If we have "SET var =" but the "var" is not a known GUC variable,
don't offer any completions. The most likely explanation is that
we've misparsed the context and it's not really a GUC-setting command.
Per gripe from Ken Tanzer. Back-patch to 9.6. The issue exists
further back, but before 9.6 the code looks very different and it
doesn't actually know whether the "var" name matches anything,
so I desisted from trying to fix it.
Don't read fields of a misaligned ExpandedObjectHeader or AnyArrayType.
UBSan complains about this. Instead, cast to a suitable type requiring
only 4-byte alignment. DatumGetAnyArrayP() already assumes one can cast
between AnyArrayType and ArrayType, so this doesn't introduce a new
assumption. Back-patch to 9.5, where AnyArrayType was introduced.
Andrew Gierth [Sun, 30 Jun 2019 22:49:29 +0000 (23:49 +0100)]
Repair logic for reordering grouping sets optimization.
The logic in reorder_grouping_sets to order grouping set elements to
match a pre-specified sort ordering was defective, resulting in
unnecessary sort nodes (though the query output would still be
correct). Repair, simplifying the code a little, and add a test.
Per report from Richard Guo, though I didn't use their patch. Original
bug seems to have been my fault.
Backpatch back to 9.5 where grouping sets were introduced.
Thomas Munro [Thu, 27 Jun 2019 23:11:26 +0000 (11:11 +1200)]
Fix misleading comment in nodeIndexonlyscan.c.
The stated reason for acquiring predicate locks on heap pages hasn't
existed since commit c01262a8, so fix the comment. Perhaps in a later
release we'll also be able to change the code to use tuple locks.
Tomas Vondra [Thu, 27 Jun 2019 16:14:25 +0000 (18:14 +0200)]
Update reference to sampling algorithm in analyze.c
Commit 83e176ec1 moved row sampling functions from analyze.c to
utils/misc/sampling.c, but failed to update comment referring to
the sampling algorithm from Jeff Vitter's paper. Correct the
comment by pointing to utils/misc/sampling.c.
projects / postgresql / log