Tom Lane [Thu, 22 Mar 2018 00:03:28 +0000 (20:03 -0400)]
Fix mishandling of quoted-list GUC values in pg_dump and ruleutils.c.
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Andrew Gierth [Wed, 21 Mar 2018 11:34:09 +0000 (11:34 +0000)]
Repair crash with unsortable grouping sets.
If there were multiple grouping sets, none of them empty, all of which
were unsortable, then an oversight in consider_groupingsets_paths led
to a null pointer dereference. Fix, and add a regression test for this
case.
Per report from Dang Minh Huong, though I didn't use their patch.
Backpatch to 10.x where hashed grouping sets were added.
Teodor Sigaev [Wed, 21 Mar 2018 11:37:18 +0000 (14:37 +0300)]
Rework word_similarity documentation, make it close to actual algorithm.
word_similarity before claimed as returning similarity of closest word in
string, but, actually it returns similarity of substring. Also fix mistyped
comments.
Author: Alexander Korotkov
Review by: David Steele, Liudmila Mantrova
Discussionis:
https://www.postgresql.org/message-id/flat/CY4PR17MB13207ED8310F847CF117EED0D85A0@CY4PR17MB1320.namprd17.prod.outlook.com
https://www.postgresql.org/message-id/flat/f43b242d-000c-f4c8-cb8b-d37e9752cd93%40postgrespro.ru
Tom Lane [Tue, 20 Mar 2018 03:59:17 +0000 (23:59 -0400)]
Prevent query-lifespan memory leakage of SP-GiST traversal values.
The original coding of the SP-GiST scan traversalValue feature (commit ccd6eb49a) arranged for traversal values to be stored in the query's main
executor context. That's fine if there's only one index scan per query,
but if there are many, we have a memory leak as successive scans create
new traversal values. Fix it by creating a separate memory context for
traversal values, which we can reset during spgrescan(). Back-patch
to 9.6 where this code was introduced.
In principle, adding the traversalCxt field to SpGistScanOpaqueData
creates an ABI break in the back branches. But I (tgl) have little
sympathy for extensions including spgist_private.h, so I'm not very
worried about that. Alternatively we could stick the new field at the
end of the struct in back branches, but that has its own downsides.
Tom Lane [Mon, 19 Mar 2018 22:49:53 +0000 (18:49 -0400)]
Fix some corner-case issues in REFRESH MATERIALIZED VIEW CONCURRENTLY.
refresh_by_match_merge() has some issues in the way it builds a SQL
query to construct the "diff" table:
1. It doesn't require the selected unique index(es) to be indimmediate.
2. It doesn't pay attention to the particular equality semantics enforced
by a given index, but just assumes that they must be those of the column
datatype's default btree opclass.
3. It doesn't check that the indexes are btrees.
4. It's insufficiently careful to ensure that the parser will pick the
intended operator when parsing the query. (This would have been a
security bug before CVE-2018-1058.)
5. It's not careful about indexes on system columns.
The way to fix #4 is to make use of the existing code in ri_triggers.c
for generating an arbitrary binary operator clause. I chose to move
that to ruleutils.c, since that seems a more reasonable place to be
exporting such functionality from than ri_triggers.c.
While #1, #3, and #5 are just latent given existing feature restrictions,
and #2 doesn't arise in the core system for lack of alternate opclasses
with different equality behaviors, #4 seems like an issue worth
back-patching. That's the bulk of the change anyway, so just back-patch
the whole thing to 9.4 where this code was introduced.
Tom Lane [Mon, 19 Mar 2018 21:23:07 +0000 (17:23 -0400)]
Fix performance hazard in REFRESH MATERIALIZED VIEW CONCURRENTLY.
Jeff Janes discovered that commit 7ca25b7de made one of the queries run by
REFRESH MATERIALIZED VIEW CONCURRENTLY perform badly. The root cause is
bad cardinality estimation for correlated quals, but a principled solution
to that problem is some way off, especially since the planner lacks any
statistics about whole-row variables. Moreover, in non-error cases this
query produces no rows, meaning it must be run to completion; but use of
LIMIT 1 encourages the planner to pick a fast-start, slow-completion plan,
exactly not what we want. Remove the LIMIT clause, and instead rely on
the count parameter we pass to SPI_execute() to prevent excess work if the
query does return some rows.
While we've heard no field reports of planner misbehavior with this query,
it could be that people are having performance issues that haven't reached
the level of pain needed to cause a bug report. In any case, that LIMIT
clause can't possibly do anything helpful with any existing version of the
planner, and it demonstrably can cause bad choices in some cases, so
back-patch to 9.4 where the code was introduced.
Alvaro Herrera [Mon, 19 Mar 2018 20:43:55 +0000 (17:43 -0300)]
Fix state reversal after partition tuple routing
We make some changes to ModifyTableState and the EState it uses whenever
we route tuples to partitions; but we weren't restoring properly in all
cases, possibly causing crashes when partitions with different tuple
descriptors are targeted by tuples inserted in the same command.
Refactor some code, creating ExecPrepareTupleRouting, to encapsulate the
needed state changing logic, and have it invoked one level above its
current place (ie. put it in ExecModifyTable instead of ExecInsert);
this makes it all more readable.
Add a test case to exercise this.
We don't support having views as partitions; and since only views can
have INSTEAD OF triggers, there is no point in testing for INSTEAD OF
when processing insertions into a partitioned table. Remove code that
appears to support this (but which is actually never relevant.)
In passing, fix location of some very confusing comments in
ModifyTableState.
Reported-by: Amit Langote
Author: Etsuro Fujita, Amit Langote
Discussion: https://postgr/es/m/0473bf5c-57b1-f1f7-3d58-455c2230bc5f@lab.ntt.co.jp
Tom Lane [Sun, 18 Mar 2018 19:10:28 +0000 (15:10 -0400)]
Doc: note that statement-level view triggers require an INSTEAD OF trigger.
If a view lacks an INSTEAD OF trigger, DML on it can only work by rewriting
the command into a command on the underlying base table(s). Then we will
fire triggers attached to those table(s), not those for the view. This
seems appropriate from a consistency standpoint, but nowhere was the
behavior explicitly documented, so let's do that.
There was some discussion of throwing an error or warning if a statement
trigger is created on a view without creating a row INSTEAD OF trigger.
But a simple implementation of that would result in dump/restore ordering
hazards. Given that it's been like this all along, and we hadn't heard
a complaint till now, a documentation improvement seems sufficient.
Per bug #15106 from Pu Qun. Back-patch to all supported branches.
Magnus Hagander [Sun, 18 Mar 2018 12:08:25 +0000 (13:08 +0100)]
Fix pg_recvlogical for pre-10 versions
In e170b8c8, protection against modified search_path was added. However,
PostgreSQL versions prior to 10 does not accept SQL commands over a
replication connection, so the protection would generate a syntax error.
Since we cannot run SQL commands on it, we are also not vulnerable to
the issue that e170b8c8 fixes, so we can just skip this command for
older versions.
Tom Lane [Sat, 17 Mar 2018 19:38:15 +0000 (15:38 -0400)]
Fix overflow handling in plpgsql's integer FOR loops.
The test to exit the loop if the integer control value would overflow
an int32 turns out not to work on some ICC versions, as it's dependent
on the assumption that the compiler will execute the code as written
rather than "optimize" it. ICC lacks any equivalent of gcc's -fwrapv
switch, so it was optimizing on the assumption of no integer overflow,
and that breaks this. Rewrite into a form that in fact does not
do any overflowing computations.
Per Tomas Vondra and buildfarm member fulmar. It's been like this
for a long time, although it was not till we added a regression test
case covering the behavior (in commit dd2243f2a) that the problem
became apparent. Back-patch to all supported versions.
Tom Lane [Sat, 17 Mar 2018 18:59:31 +0000 (14:59 -0400)]
Fix WHERE CURRENT OF when the referenced cursor uses an index-only scan.
"UPDATE/DELETE WHERE CURRENT OF cursor_name" failed, with an error message
like "cannot extract system attribute from virtual tuple", if the cursor
was using a index-only scan for the target table. Fix it by digging the
current TID out of the indexscan state.
It seems likely that the same failure could occur for CustomScan plans
and perhaps some FDW plan types, so that leaving this to be treated as an
internal error with an obscure message isn't as good an idea as it first
seemed. Hence, add a bit of heaptuple.c infrastructure to let us deliver
a more on-topic message. I chose to make the message match what you get
for the case where execCurrentOf can't identify the target scan node at
all, "cursor "foo" is not a simply updatable scan of table "bar"".
Perhaps it should be different, but we can always adjust that later.
In the future, it might be nice to provide hooks that would let custom
scan providers and/or FDWs deal with this in other ways; but that's
not a suitable topic for a back-patchable bug fix.
It's been like this all along, so back-patch to all supported branches.
Tom Lane [Fri, 16 Mar 2018 20:03:45 +0000 (16:03 -0400)]
Fix query-lifespan memory leakage in repeatedly executed hash joins.
ExecHashTableCreate allocated some memory that wasn't freed by
ExecHashTableDestroy, specifically the per-hash-key function information.
That's not a huge amount of data, but if one runs a query that repeats
a hash join enough times, it builds up. Fix by arranging for the data
in question to be kept in the hashtable's hashCxt instead of leaving it
"loose" in the query-lifespan executor context. (This ensures that we'll
also clean up anything that the hash functions allocate in fn_mcxt.)
Per report from Amit Khandekar. It's been like this forever, so back-patch
to all supported branches.
Tom Lane [Fri, 16 Mar 2018 17:44:34 +0000 (13:44 -0400)]
Doc: explicitly point out that enum values can't be dropped.
This was not stated in so many words anywhere. Document it to make
clear that it's a design limitation and not just an oversight or
documentation omission.
Tom Lane [Thu, 15 Mar 2018 21:08:51 +0000 (17:08 -0400)]
Clean up duplicate table and function names in regression tests.
Many of the objects we create during the regression tests are put in the
public schema, so that using the same names in different regression tests
creates a hazard of test failures if any two such scripts run concurrently.
This patch cleans up a bunch of latent hazards of that sort, as well as two
live hazards.
The current situation in this regard is far worse than it was a year or two
back, because practically all of the partitioning-related test cases have
reused table names with enthusiasm. I despaired of cleaning up that mess
within the five most-affected tests (create_table, alter_table, insert,
update, inherit); fortunately those don't run concurrently.
Other than partitioning problems, most of the issues boil down to using
names like "foo", "bar", "tmp", etc, without thought for the fact that
other test scripts might use similar names concurrently. I've made an
effort to make all such names more specific.
One of the live hazards was that commit 7421f4b8 caused with.sql to
create a table named "test", conflicting with a similarly-named table
in alter_table.sql; this was exposed in the buildfarm recently.
The other one was that join.sql and transactions.sql both create tables
named "foo" and "bar"; but join.sql's uses of those names date back
only to December or so.
Since commit 7421f4b8 was back-patched to v10, back-patch a minimal
fix for that problem. The rest of this is just future-proofing.
Tom Lane [Thu, 15 Mar 2018 18:00:31 +0000 (14:00 -0400)]
Clean up duplicate role and schema names in regression tests.
Since these names are global, using the same ones in different regression
tests creates a hazard of test failures if any two such scripts run
concurrently. Let's establish a policy of not doing that. In the cases
where a conflict existed, I chose to rename both sides: in principle one
script or the other could've been left in possession of the common name,
but that seems to just invite more trouble of the same sort.
There are a number of places where scripts are using names that seem
unduly generic, but in the absence of actual conflicts I left them alone.
In addition, fix insert.sql's use of "someone_else" as a role name.
That's a flat out violation of longstanding project policy, so back-patch
that change to v10 where the usage appeared. The rest of this is just
future-proofing, as no two of these scripts are actually run concurrently
in the existing parallel_schedule.
Conflicts of schema-qualified names also exist, but will be dealt with
separately.
Alvaro Herrera [Thu, 15 Mar 2018 12:51:12 +0000 (09:51 -0300)]
test_ddl_deparse: Don't use pg_class as source for a matview
Doing so causes a pg_upgrade of a database containing these objects to
fail whenever pg_class changes. And it's pointless anyway: we have more
interesting tables anyhow.
Alvaro Herrera [Thu, 15 Mar 2018 00:34:21 +0000 (21:34 -0300)]
logical replication: fix OID type mapping mechanism
The logical replication type map seems to have been misused by its only
caller -- it would try to use the remote OID as input for local type
routines, which unsurprisingly could result in bogus "cache lookup
failed for type XYZ" errors, or random other type names being picked up
if they happened to use the right OID. Fix that, changing
Oid logicalrep_typmap_getid(Oid remoteid) to
char *logicalrep_typmap_gettypname(Oid remoteid)
which is more useful. If the remote type is not part of the typmap,
this simply prints "unrecognized type" instead of choking trying to
figure out -- a pointless exercise (because the only input for that
comes from replication messages, which are not under the local node's
control) and dangerous to boot, when called from within an error context
callback.
Once that is done, it comes to light that the local OID in the typmap
entry was not being used for anything; the type/schema names are what we
need, so remove local type OID from that struct.
Once you do that, it becomes pointless to attach a callback to regular
syscache invalidation. So remove that also.
Alvaro Herrera [Wed, 14 Mar 2018 14:53:56 +0000 (11:53 -0300)]
Log when a BRIN autosummarization request fails
Autovacuum's 'workitem' request queue is of limited size, so requests
can fail if they arrive more quickly than autovacuum can process them.
Emit a log message when this happens, to provide better visibility of
this.
Backpatch to 10. While this represents an API change for
AutoVacuumRequestWork, that function is not yet prepared to deal with
external modules calling it, so there doesn't seem to be any risk (other
than log spam, that is.)
Tom Lane [Tue, 13 Mar 2018 17:24:27 +0000 (13:24 -0400)]
When updating reltuples after ANALYZE, just extrapolate from our sample.
The existing logic for updating pg_class.reltuples trusted the sampling
results only for the pages ANALYZE actually visited, preferring to
believe the previous tuple density estimate for all the unvisited pages.
While there's some rationale for doing that for VACUUM (first that
VACUUM is likely to visit a very nonrandom subset of pages, and second
that we know for sure that the unvisited pages did not change), there's
no such rationale for ANALYZE: by assumption, it's looked at an unbiased
random sample of the table's pages. Furthermore, in a very large table
ANALYZE will have examined only a tiny fraction of the table's pages,
meaning it cannot slew the overall density estimate very far at all.
In a table that is physically growing, this causes reltuples to increase
nearly proportionally to the change in relpages, regardless of what is
actually happening in the table. This has been observed to cause reltuples
to become so much larger than reality that it effectively shuts off
autovacuum, whose threshold for doing anything is a fraction of reltuples.
(Getting to the point where that would happen seems to require some
additional, not well understood, conditions. But it's undeniable that if
reltuples is seriously off in a large table, ANALYZE alone will not fix it
in any reasonable number of iterations, especially not if the table is
continuing to grow.)
Hence, restrict the use of vac_estimate_reltuples() to VACUUM alone,
and in ANALYZE, just extrapolate from the sample pages on the assumption
that they provide an accurate model of the whole table. If, by very bad
luck, they don't, at least another ANALYZE will fix it; in the old logic
a single bad estimate could cause problems indefinitely.
In HEAD, let's remove vac_estimate_reltuples' is_analyze argument
altogether; it was never used for anything and now it's totally pointless.
But keep it in the back branches, in case any third-party code is calling
this function.
Per bug #15005. Back-patch to all supported branches.
David Gould, reviewed by Alexander Kuzmenkov, cosmetic changes by me
Tom Lane [Tue, 13 Mar 2018 16:28:15 +0000 (12:28 -0400)]
Avoid holding AutovacuumScheduleLock while rechecking table statistics.
In databases with many tables, re-fetching the statistics takes some time,
so that this behavior seriously decreases the available concurrency for
multiple autovac workers. There's discussion afoot about more complete
fixes, but a simple and back-patchable amelioration is to claim the table
and release the lock before rechecking stats. If we find out there's no
longer a reason to process the table, re-taking the lock to un-claim the
table is cheap enough.
(This patch is quite old, but got lost amongst a discussion of more
aggressive fixes. It's not clear when or if such a fix will be
accepted, but in any case it'd be unlikely to get back-patched.
Let's do this now so we have some improvement for the back branches.)
In passing, make the normal un-claim step take AutovacuumScheduleLock
not AutovacuumLock, since that is what is documented to protect the
wi_tableoid field. This wasn't an actual bug in view of the fact that
readers of that field hold both locks, but it creates some concurrency
penalty against operations that need only AutovacuumLock.
Fix CREATE TABLE / LIKE with bigint identity column
CREATE TABLE / LIKE with a bigint identity column would fail on
platforms where long is 32 bits. Copying the sequence values used
makeInteger(), which would truncate the 64-bit sequence data to 32 bits.
To fix, use makeFloat() instead, like the parser. (This does not
actually make use of floats, but stores the values as strings.)
Bug: #15096 Reviewed-by: Michael Paquier <michael@paquier.xyz>
Tom Lane [Sun, 11 Mar 2018 22:10:42 +0000 (18:10 -0400)]
Fix improper uses of canonicalize_qual().
One of the things canonicalize_qual() does is to remove constant-NULL
subexpressions of top-level AND/OR clauses. It does that on the assumption
that what it's given is a top-level WHERE clause, so that NULL can be
treated like FALSE. Although this is documented down inside a subroutine
of canonicalize_qual(), it wasn't mentioned in the documentation of that
function itself, and some callers hadn't gotten that memo.
Notably, commit d007a9505 caused get_relation_constraints() to apply
canonicalize_qual() to CHECK constraints. That allowed constraint
exclusion to misoptimize situations in which a CHECK constraint had a
provably-NULL subclause, as seen in the regression test case added here,
in which a child table that should be scanned is not. (Although this
thinko is ancient, the test case doesn't fail before 9.2, for reasons
I've not bothered to track down in detail. There may be related cases
that do fail before that.)
More recently, commit f0e44751d added an independent bug by applying
canonicalize_qual() to index expressions, which is even sillier since
those might not even be boolean. If they are, though, I think this
could lead to making incorrect index entries for affected index
expressions in v10. I haven't attempted to prove that though.
To fix, add an "is_check" parameter to canonicalize_qual() to specify
whether it should assume WHERE or CHECK semantics, and make it perform
NULL-elimination accordingly. Adjust the callers to apply the right
semantics, or remove the call entirely in cases where it's not known
that the expression has one or the other semantics. I also removed
the call in some cases involving partition expressions, where it should
be a no-op because such expressions should be canonical already ...
and was a no-op, independently of whether it could in principle have
done something, because it was being handed the qual in implicit-AND
format which isn't what it expects. In HEAD, add an Assert to catch
that type of mistake in future.
This represents an API break for external callers of canonicalize_qual().
While that's intentional in HEAD to make such callers think about which
case applies to them, it seems like something we probably wouldn't be
thanked for in released branches. Hence, in released branches, the
extra parameter is added to a new function canonicalize_qual_ext(),
and canonicalize_qual() is a wrapper that retains its old behavior.
Patch by me with suggestions from Dean Rasheed. Back-patch to all
supported branches.
Peter Eisentraut [Wed, 28 Feb 2018 13:22:51 +0000 (08:22 -0500)]
Fix warnings in man page build
The changes in the CREATE POLICY man page from commit 87c2a17fee784c7e1004ba3d3c5d8147da676783 triggered a stylesheet bug that
created some warning messages and incorrect output. This installs a
workaround.
Also improve the whitespace a bit so it looks better.
Tom Lane [Thu, 8 Mar 2018 16:26:20 +0000 (11:26 -0500)]
In initdb, don't bother trying max_connections = 10.
The server won't actually start with that setting anymore, not since
we raised the default max_wal_senders to 10. Per discussion, we don't
wish to back down on that default, so instead raise the effective floor
for max_connections (to 20). It's still possible to configure a smaller
setting manually, but initdb won't set it that way.
Since that change happened in v10, back-patch to v10.
Alvaro Herrera [Tue, 6 Mar 2018 18:57:20 +0000 (15:57 -0300)]
Refrain from duplicating data in reorderbuffers
If a walsender exits leaving data in reorderbuffers, the next walsender
that tries to decode the same transaction would append its decoded data
in the same spill files without truncating it first, which effectively
duplicate the data. Avoid that by removing any leftover reorderbuffer
spill files when a walsender starts.
Backpatch to 9.4; this bug has been there from the very beginning of
logical decoding.
Author: Craig Ringer, revised by me
Reviewed by: Álvaro Herrera, Petr Jelínek, Masahiko Sawada
Alvaro Herrera [Tue, 6 Mar 2018 16:17:13 +0000 (13:17 -0300)]
Fix bogus Name assignment in CreateStatistics
Apparently, it doesn't work to use a plain cstring as a Name datum: you
may end up having random bytes because of failing to zero the bytes
after the terminating \0, as indicated by valgrind. I introduced this
bug in 5564c1181548, so backpatch this fix to REL_10_STABLE, like that
commit.
While at it, fix a slightly misleading comment, pointed out by David
Rowley.
Alvaro Herrera [Mon, 5 Mar 2018 22:37:19 +0000 (19:37 -0300)]
Clone extended stats in CREATE TABLE (LIKE INCLUDING ALL)
The LIKE INCLUDING ALL clause to CREATE TABLE intuitively indicates
cloning of extended statistics on the source table, but it failed to do
so. Patch it up so that it does. Also include an INCLUDING STATISTICS
option to the LIKE clause, so that the behavior can be requested
individually, or excluded individually.
While at it, reorder the INCLUDING options, both in code and in docs, in
alphabetical order which makes more sense than feature-implementation
order that was previously used.
Backpatch this to Postgres 10, where extended statistics were
introduced, because this is seen as an oversight in a fresh feature
which is better to get consistent from the get-go instead of changing
only in pg11.
In pg11, comments on statistics objects are cloned too. In pg10 they
are not, because I (Álvaro) was too coward to change the parse node as
required to support it. Also, in pg10 I chose not to renumber the
parser symbols for the various INCLUDING options in LIKE, for the same
reason. Any corresponding user-visible changes (docs) are backpatched,
though.
Reported-by: Stephen Froehlich
Author: David Rowley Reviewed-by: Álvaro Herrera, Tomas Vondra
Discussion: https://postgr.es/m/CY1PR0601MB1927315B45667A1B679D0FD5E5EF0@CY1PR0601MB1927.namprd06.prod.outlook.com
Fujii Masao [Mon, 5 Mar 2018 17:08:18 +0000 (02:08 +0900)]
Fix pg_rewind to handle relation data files in tablespaces properly.
pg_rewind checks whether each file is a relation data file, from its path.
Previously this check logic had the bug which made pg_rewind fail to
recognize any relation data files in tablespaces. Which also caused
an assertion failure in pg_rewind.
Tom Lane [Sun, 4 Mar 2018 01:31:35 +0000 (20:31 -0500)]
Fix assorted issues in convert_to_scalar().
If convert_to_scalar is passed a pair of datatypes it can't cope with,
its former behavior was just to elog(ERROR). While this is OK so far as
the core code is concerned, there's extension code that would like to use
scalarltsel/scalargtsel/etc as selectivity estimators for operators that
work on non-core datatypes, and this behavior is a show-stopper for that
use-case. If we simply allow convert_to_scalar to return FALSE instead of
outright failing, then the main logic of scalarltsel/scalargtsel will work
fine for any operator that behaves like a scalar inequality comparison.
The lack of conversion capability will mean that we can't estimate to
better than histogram-bin-width precision, since the code will effectively
assume that the comparison constant falls at the middle of its bin. But
that's still a lot better than nothing. (Someday we should provide a way
for extension code to supply a custom version of convert_to_scalar, but
today is not that day.)
While poking at this issue, we noted that the existing code for handling
type bytea in convert_to_scalar is several bricks shy of a load.
It assumes without checking that if the comparison value is type bytea,
the bounds values are too; in the worst case this could lead to a crash.
It also fails to detoast the input values, so that the comparison result is
complete garbage if any input is toasted out-of-line, compressed, or even
just short-header. I'm not sure how often such cases actually occur ---
the bounds values, at least, are probably safe since they are elements of
an array and hence can't be toasted. But that doesn't make this code OK.
Back-patch to all supported branches, partly because author requested that,
but mostly because of the bytea bugs. The change in API for the exposed
routine convert_network_to_scalar() is theoretically a back-patch hazard,
but it seems pretty unlikely that any third-party code is calling that
function directly.
Tom Lane [Fri, 2 Mar 2018 22:40:48 +0000 (17:40 -0500)]
Fix VM buffer pin management in heap_lock_updated_tuple_rec().
Sloppy coding in this function could lead to leaking a VM buffer pin,
or to attempting to free the same pin twice. Repair. While at it,
reduce the code's tendency to free and reacquire the same page pin.
Back-patch to 9.6; before that, this routine did not concern itself
with VM pages.
Tom Lane [Fri, 2 Mar 2018 16:22:42 +0000 (11:22 -0500)]
Make gistvacuumcleanup() count the actual number of index tuples.
Previously, it just returned the heap tuple count, which might be only an
estimate, and would be completely the wrong thing if the index is partial.
Since this function scans every index page anyway to find free pages,
it's practically free to count the surviving index tuples. Let's do that
and return an accurate count.
This is easily visible as a wrong reltuples value for a partial GiST
index following VACUUM, so back-patch to all supported branches.
Tom Lane [Thu, 1 Mar 2018 21:23:30 +0000 (16:23 -0500)]
Use ereport not elog for some corrupt-HOT-chain reports.
These errors have been seen in the field in corrupted-data situations.
It seems worthwhile to report them with ERRCODE_DATA_CORRUPTED, rather
than the generic ERRCODE_INTERNAL_ERROR, for the benefit of log monitoring
and tools like amcheck. However, use errmsg_internal so that the text
strings still aren't translated; it seems unlikely to be worth
translators' time to do so.
Back-patch to 9.3, like the predecessor commit d70cf811f that introduced
these elog calls originally (replacing Asserts).
Alvaro Herrera [Thu, 1 Mar 2018 21:07:46 +0000 (18:07 -0300)]
Relax overly strict sanity check for upgraded ancient databases
Commit 4800f16a7ad0 added some sanity checks to ensure we don't
accidentally corrupt data, but in one of them we failed to consider the
effects of a database upgraded from 9.2 or earlier, where a tuple
exclusively locked prior to the upgrade has a slightly different bit
pattern. Fix that by using the macro that we fixed in commit 74ebba84aeb6 for similar situations.
Reported-by: Alexandre Garcia Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAPYLKR6yxV4=pfW0Gwij7aPNiiPx+3ib4USVYnbuQdUtmkMaEA@mail.gmail.com
Andres suspects that this bug may have wider ranging consequences, but I
couldn't find anything.
Tom Lane [Thu, 1 Mar 2018 20:35:03 +0000 (15:35 -0500)]
Fix IOS planning when only some index columns can return an attribute.
Since 9.5, it's possible that some but not all columns of an index
support returning the indexed value for index-only scans. If the
same indexed column appears in index columns that behave both ways,
check_index_only() supposed that it'd be OK to do an index-only scan
testing that column; but that fails if we have to recheck the indexed
condition on one of the columns that doesn't support this.
In principle we could make this work by remapping the recheck expressions
to pull the value from a column that does support returning the indexed
value. But such cases are so weird and rare that, at least for now,
it doesn't seem worth the trouble. Instead, just teach check_index_only
that a value is returnable only if all the index columns containing it
are returnable, rather than any of them.
Per report from David Pereiro Lagares. Back-patch to 9.5 where the
possibility of this situation appeared.
Tom Lane [Wed, 28 Feb 2018 23:33:45 +0000 (18:33 -0500)]
Rename base64 routines to avoid conflict with Solaris built-in functions.
Solaris 11.4 has built-in functions named b64_encode and b64_decode.
Rename ours to something else to avoid the conflict (fortunately,
ours are static so the impact is limited).
One could wish for less duplication of code in this area, but that
would be a larger patch and not very suitable for back-patching.
Since this is a portability fix, we want to put it into all supported
branches.
Report and initial patch by Rainer Orth, reviewed and adjusted a bit
by Michael Paquier
Tom Lane [Wed, 28 Feb 2018 21:57:37 +0000 (16:57 -0500)]
Remove restriction on SQL block length in isolationtester scanner.
specscanner.l had a fixed limit of 1024 bytes on the length of
individual SQL stanzas in an isolation test script. People are
starting to run into that, so fix it by making the buffer resizable.
Once we allow this in HEAD, it seems inevitable that somebody will
try to back-patch a test that exceeds the old limit, so back-patch
this change as a preventive measure.
Tom Lane [Tue, 27 Feb 2018 21:46:52 +0000 (16:46 -0500)]
Fix up ecpg's configuration so it handles "long long int" in MSVC builds.
Although configure-based builds correctly define HAVE_LONG_LONG_INT when
appropriate (in both pg_config.h and ecpg_config.h), builds using the MSVC
scripts failed to do so. This currently has no impact on the backend,
since it uses that symbol nowhere; but it does prevent ecpg from
supporting "long long int". Fix that.
Also, adjust Solution.pm so that in the constructed ecpg_config.h file,
the "#if (_MSC_VER > 1200)" covers only the LONG_LONG_INT-related
#defines, not the whole file. AFAICS this was a thinko on somebody's
part: ENABLE_THREAD_SAFETY should always be defined in Windows builds,
and in branches using USE_INTEGER_DATETIMES, the setting of that shouldn't
depend on the compiler version either. If I'm wrong, I imagine the
buildfarm will say so.
Per bug #15080 from Jonathan Allen; issue diagnosed by Michael Meskes
and Andrew Gierth. Back-patch to all supported branches.
Tom Lane [Tue, 27 Feb 2018 20:56:51 +0000 (15:56 -0500)]
Use the correct tuplestore read pointer in a NamedTuplestoreScan.
Tom Kazimiers reported that transition tables don't work correctly when
they are scanned by more than one executor node. That's because commit 18ce3a4ab allocated separate read pointers for each executor node, as it
must, but failed to make them active at the appropriate times. Repair.
Tom Lane [Tue, 27 Feb 2018 20:04:21 +0000 (15:04 -0500)]
Remove regression tests' CREATE FUNCTION commands for unused C functions.
I removed these functions altogether in HEAD, in commit db3af9feb, and
it emerges that that causes trouble for cross-branch upgrade testing.
We could put back stub functions but that seems pretty silly. Instead,
back-patch a minimal subset of db3af9feb, namely just removing the
CREATE FUNCTION commands.
Tom Lane [Tue, 27 Feb 2018 18:27:38 +0000 (13:27 -0500)]
Prevent dangling-pointer access when update trigger returns old tuple.
A before-update row trigger may choose to return the "new" or "old" tuple
unmodified. ExecBRUpdateTriggers failed to consider the second
possibility, and would proceed to free the "old" tuple even if it was the
one returned, leading to subsequent access to already-deallocated memory.
In debug builds this reliably leads to an "invalid memory alloc request
size" failure; in production builds it might accidentally work, but data
corruption is also possible.
This is a very old bug. There are probably a couple of reasons it hasn't
been noticed up to now. It would be more usual to return NULL if one
wanted to suppress the update action; returning "old" is significantly less
efficient since the update will occur anyway. Also, none of the standard
PLs would ever cause this because they all returned freshly-manufactured
tuples even if they were just copying "old". But commit 4b93f5799 changed
that for plpgsql, making it possible to see the bug with a plpgsql trigger.
Still, this is certainly legal behavior for a trigger function, so it's
ExecBRUpdateTriggers's fault not plpgsql's.
It seems worth creating a test case that exercises returning "old" directly
with a C-language trigger; testing this through plpgsql seems unreliable
because its behavior might change again.
Report and fix by Rushabh Lathia; regression test case by me.
Back-patch to all supported branches.
Noah Misch [Mon, 26 Feb 2018 15:39:44 +0000 (07:39 -0800)]
Document security implications of search_path and the public schema.
The ability to create like-named objects in different schemas opens up
the potential for users to change the behavior of other users' queries,
maliciously or accidentally. When you connect to a PostgreSQL server,
you should remove from your search_path any schema for which a user
other than yourself or superusers holds the CREATE privilege. If you do
not, other users holding CREATE privilege can redefine the behavior of
your commands, causing them to perform arbitrary SQL statements under
your identity. "SET search_path = ..." and "SELECT
pg_catalog.set_config(...)" are not vulnerable to such hijacking, so one
can use either as the first command of a session. As special
exceptions, the following client applications behave as documented
regardless of search_path settings and schema privileges: clusterdb
createdb createlang createuser dropdb droplang dropuser ecpg (not
programs it generates) initdb oid2name pg_archivecleanup pg_basebackup
pg_config pg_controldata pg_ctl pg_dump pg_dumpall pg_isready
pg_receivewal pg_recvlogical pg_resetwal pg_restore pg_rewind pg_standby
pg_test_fsync pg_test_timing pg_upgrade pg_waldump reindexdb vacuumdb
vacuumlo. Not included are core client programs that run user-specified
SQL commands, namely psql and pgbench. PostgreSQL encourages non-core
client applications to do likewise.
Document this in the context of libpq connections, psql connections,
dblink connections, ECPG connections, extension packaging, and schema
usage patterns. The principal defense for applications is "SELECT
pg_catalog.set_config('search_path', '', false)", and the principal
defense for databases is "REVOKE CREATE ON SCHEMA public FROM PUBLIC".
Either one is sufficient to prevent attack. After a REVOKE, consider
auditing the public schema for objects named like pg_catalog objects.
Authors of SECURITY DEFINER functions use some of the same defenses, and
the CREATE FUNCTION reference page already covered them thoroughly.
This is a good opportunity to audit SECURITY DEFINER functions for
robust security practice.
Back-patch to 9.3 (all supported versions).
Reviewed by Michael Paquier and Jonathan S. Katz. Reported by Arseniy
Sharoglazov.
Noah Misch [Mon, 26 Feb 2018 15:39:44 +0000 (07:39 -0800)]
Empty search_path in Autovacuum and non-psql/pgbench clients.
This makes the client programs behave as documented regardless of the
connect-time search_path and regardless of user-created objects. Today,
a malicious user with CREATE permission on a search_path schema can take
control of certain of these clients' queries and invoke arbitrary SQL
functions under the client identity, often a superuser. This is
exploitable in the default configuration, where all users have CREATE
privilege on schema "public".
This changes behavior of user-defined code stored in the database, like
pg_index.indexprs and pg_extension_config_dump(). If they reach code
bearing unqualified names, "does not exist" or "no schema has been
selected to create in" errors might appear. Users may fix such errors
by schema-qualifying affected names. After upgrading, consider watching
server logs for these errors.
The --table arguments of src/bin/scripts clients have been lax; for
example, "vacuumdb -Zt pg_am\;CHECKPOINT" performed a checkpoint. That
now fails, but for now, "vacuumdb -Zt 'pg_am(amname);CHECKPOINT'" still
performs a checkpoint.
Back-patch to 9.3 (all supported versions).
Reviewed by Tom Lane, though this fix strategy was not his first choice.
Reported by Arseniy Sharoglazov.
Tom Lane [Mon, 26 Feb 2018 15:18:22 +0000 (10:18 -0500)]
Avoid using unsafe search_path settings during dump and restore.
Historically, pg_dump has "set search_path = foo, pg_catalog" when
dumping an object in schema "foo", and has also caused that setting
to be used while restoring the object. This is problematic because
functions and operators in schema "foo" could capture references meant
to refer to pg_catalog entries, both in the queries issued by pg_dump
and those issued during the subsequent restore run. That could
result in dump/restore misbehavior, or in privilege escalation if a
nefarious user installs trojan-horse functions or operators.
This patch changes pg_dump so that it does not change the search_path
dynamically. The emitted restore script sets the search_path to what
was used at dump time, and then leaves it alone thereafter. Created
objects are placed in the correct schema, regardless of the active
search_path, by dint of schema-qualifying their names in the CREATE
commands, as well as in subsequent ALTER and ALTER-like commands.
Since this change requires a change in the behavior of pg_restore
when processing an archive file made according to this new convention,
bump the archive file version number; old versions of pg_restore will
therefore refuse to process files made with new versions of pg_dump.
Peter Eisentraut [Sat, 24 Feb 2018 02:17:57 +0000 (21:17 -0500)]
Fix filtering of unsupported relations in logical replication
In the pgoutput plugin, skip changes for relations that are not
publishable, per is_publishable_class(). This concerns in particular
materialized views and information_schema tables. While those relations
cannot be part of a publication, per existing checks, they will be
considered by a FOR ALL TABLES publication. A subscription would not
actually apply changes for those relations, again per existing checks,
but trying to match incoming changes to local tables on the subscriber
would lead to errors if no matching local table exists. Skipping those
changes on the publisher avoids sending useless changes and eliminates
the error.
Bug: #15044 Reported-by: Chad Trabant <chad@iris.washington.edu> Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tom Lane [Fri, 23 Feb 2018 19:38:19 +0000 (14:38 -0500)]
Allow auto_explain.log_min_duration to go up to INT_MAX.
The previous limit of INT_MAX / 1000 seems to have been cargo-culted in
from somewhere else. Or possibly the value was converted to microseconds
at some point; but in all supported releases, it's just compared to other
values, so there's no need for the restriction. This change raises the
effective limit from ~35 minutes to ~24 days, which conceivably is useful
to somebody, and anyway it's more consistent with the range of the core
log_min_duration_statement GUC.
Per complaint from Kevin Bloch. Back-patch to all supported releases.
Tom Lane [Fri, 23 Feb 2018 18:47:33 +0000 (13:47 -0500)]
Fix planner failures with overlapping mergejoin clauses in an outer join.
Given overlapping or partially redundant join clauses, for example
t1 JOIN t2 ON t1.a = t2.x AND t1.b = t2.x
the planner's EquivalenceClass machinery will ordinarily refactor the
clauses as "t1.a = t1.b AND t1.a = t2.x", so that join processing doesn't
see multiple references to the same EquivalenceClass in a list of join
equality clauses. However, if the join is outer, it's incorrect to derive
a restriction clause on the outer side from the join conditions, so the
clause refactoring does not happen and we end up with overlapping join
conditions. The code that attempted to deal with such cases had several
subtle bugs, which could result in "left and right pathkeys do not match in
mergejoin" or "outer pathkeys do not match mergeclauses" planner errors,
if the selected join plan type was a mergejoin. (It does not appear that
any actually incorrect plan could have been emitted.)
The core of the problem really was failure to recognize that the outer and
inner relations' pathkeys have different relationships to the mergeclause
list. A join's mergeclause list is constructed by reference to the outer
pathkeys, so it will always be ordered the same as the outer pathkeys, but
this cannot be presumed true for the inner pathkeys. If the inner sides of
the mergeclauses contain multiple references to the same EquivalenceClass
({t2.x} in the above example) then a simplistic rendering of the required
inner sort order is like "ORDER BY t2.x, t2.x", but the pathkey machinery
recognizes that the second sort column is redundant and throws it away.
The mergejoin planning code failed to account for that behavior properly.
One error was to try to generate cut-down versions of the mergeclause list
from cut-down versions of the inner pathkeys in the same way as the initial
construction of the mergeclause list from the outer pathkeys was done; this
could lead to choosing a mergeclause list that fails to match the outer
pathkeys. The other problem was that the pathkey cross-checking code in
create_mergejoin_plan treated the inner and outer pathkey lists
identically, whereas actually the expectations for them must be different.
That led to false "pathkeys do not match" failures in some cases, and in
principle could have led to failure to detect bogus plans in other cases,
though there is no indication that such bogus plans could be generated.
Reported by Alexander Kuzmenkov, who also reviewed this patch. This has
been broken for years (back to around 8.3 according to my testing), so
back-patch to all supported branches.
Tom Lane [Wed, 21 Feb 2018 23:40:24 +0000 (18:40 -0500)]
Repair pg_upgrade's failure to preserve relfrozenxid for matviews.
This oversight led to data corruption in matviews, manifesting as
"could not access status of transaction" before our most recent releases,
and "found xmin from before relfrozenxid" errors since then.
The proximate cause of the problem seems to have been confusion between
the task of preserving dropped-column status and the task of preserving
frozenxid status. Those are required for distinct sets of relkinds,
and the reasoning was entirely undocumented in the source code. In hopes
of forestalling future errors of the same kind, try to improve the
commentary in this area.
In passing, also improve the remarkably unhelpful comments around
pg_upgrade's set_frozenxids(). That's not actually buggy AFAICS,
but good luck figuring out what it does from the old comments.
Per report from Claudio Freire. It appears that bug #14852 from Alexey
Ermakov is an earlier report of the same issue, and there may be other
cases that we failed to identify at the time.
Patch by me based on analysis by Andres Freund. The bug dates back
to the introduction of matviews, so back-patch to all supported branches.
Tom Lane [Tue, 20 Feb 2018 16:23:34 +0000 (11:23 -0500)]
Fix pg_dump's logic for eliding sequence limits that match the defaults.
The previous coding here applied atoi() to strings that could represent
values too large to fit in an int. If the overflowed value happened to
match one of the cases it was looking for, it would drop that limit
value from the output, leading to incorrect restoration of the sequence.
Avoid the unsafe behavior, and also make the logic cleaner by explicitly
calculating the default min/max values for the appropriate kind of
sequence.
Reported and patched by Alexey Bashtanov, though I whacked his patch
around a bit. Back-patch to v10 where the faulty logic was added.
Tom Lane [Mon, 19 Feb 2018 21:00:18 +0000 (16:00 -0500)]
Fix misbehavior of CTE-used-in-a-subplan during EPQ rechecks.
An updating query that reads a CTE within an InitPlan or SubPlan could get
incorrect results if it updates rows that are concurrently being modified.
This is caused by CteScanNext supposing that nothing inside its recursive
ExecProcNode call could change which read pointer is selected in the CTE's
shared tuplestore. While that's normally true because of scoping
considerations, it can break down if an EPQ plan tree gets built during the
call, because EvalPlanQualStart builds execution trees for all subplans
whether they're going to be used during the recheck or not. And it seems
like a pretty shaky assumption anyway, so let's just reselect our own read
pointer here.
Per bug #14870 from Andrei Gorita. This has been broken since CTEs were
implemented, so back-patch to all supported branches.
Tom Lane [Thu, 15 Feb 2018 18:56:38 +0000 (13:56 -0500)]
Doc: fix minor bug in CREATE TABLE example.
One example in create_table.sgml claimed to be showing table constraint
syntax, but it was really column constraint syntax due to the omission
of a comma. This is both wrong and confusing, so fix it in all
supported branches.
Tom Lane [Wed, 14 Feb 2018 19:47:18 +0000 (14:47 -0500)]
Fix broken logic for reporting PL/Python function names in errcontext.
plpython_error_callback() reported the name of the function associated
with the topmost PL/Python execution context. This was not merely
wrong if there were nested PL/Python contexts, but it risked a core
dump if the topmost one is an inline code block rather than a named
function. That will have proname = NULL, and so we were passing a NULL
pointer to snprintf("%s"). It seems that none of the PL/Python-testing
machines in the buildfarm will dump core for that, but some platforms do,
as reported by Marina Polyakova.
Investigation finds that there actually is an existing regression test
that used to prove that the behavior was wrong, though apparently no one
had noticed that it was printing the wrong function name. It stopped
showing the problem in 9.6 when we adjusted psql to not print CONTEXT
by default for NOTICE messages. The problem is masked (if your platform
avoids the core dump) in error cases, because PL/Python will throw away
the originally generated error info in favor of a new traceback produced
at the outer level.
Repair by using ErrorContextCallback.arg to pass the correct context to
the error callback. Add a regression test illustrating correct behavior.
Back-patch to all supported branches, since they're all broken this way.
Tom Lane [Sun, 11 Feb 2018 18:24:15 +0000 (13:24 -0500)]
Fix assorted errors in pg_dump's handling of extended statistics objects.
pg_dump supposed that a stats object necessarily shares the same schema
as its underlying table, and that it doesn't have a separate owner.
These things may have been true during early development of the feature,
but they are not true as of v10 release.
Failure to track the object's schema separately turns out to have only
limited consequences, because pg_get_statisticsobjdef() always schema-
qualifies the target object name in the generated CREATE STATISTICS command
(a decision out of step with the rest of ruleutils.c, but I digress).
Therefore the restored object would be in the right schema, so that the
only problem is that the TOC entry would be mislabeled as to schema. That
could lead to wrong decisions for schema-selective restores, for example.
The ownership issue is a bit more serious: not only was the TOC entry
potentially mislabeled as to owner, but pg_dump didn't bother to issue an
ALTER OWNER command at all, so that after restore the stats object would
continue to be owned by the restoring superuser.
A final point is that decisions as to whether to dump a stats object or
not were driven by whether the underlying table was dumped or not. While
that's not wrong on its face, it won't scale nicely to the planned future
extension to cross-table statistics. Moreover, that design decision comes
out of the view of stats objects as being auxiliary to a particular table,
like a rule or trigger, which is exactly where the above problems came
from. Since we're now treating stats objects more like independent objects
in their own right, they ought to behave like standalone objects for this
purpose too. So change to using the generic selectDumpableObject() logic
for them (which presently amounts to "dump if containing schema is to be
dumped").
Along the way to fixing this, restructure so that getExtendedStatistics
collects the identity info (only) for all extended stats objects in one
query, and then for each object actually being dumped, we retrieve the
definition in dumpStatisticsExt. This is necessary to ensure that
schema-qualification in the generated CREATE STATISTICS command happens
with respect to the search path that pg_dump will now be using at restore
time (ie, the schema the stats object is in, not that of the underlying
table). It's probably also significantly faster in the typical scenario
where only a minority of tables have extended stats.
Back-patch to v10 where extended stats were introduced.
Magnus Hagander [Wed, 7 Feb 2018 10:03:55 +0000 (11:03 +0100)]
Change default git repo URL to https
Since we now support the server side handler for git over https (so
we're no longer using the "dumb protocol"), make https the primary
choice for cloning the repository, and the git protocol the secondary
choice.
In passing, also change the links to git-scm.com from http to https.
Reviewed by Stefan Kaltenbrunner and David G. Johnston
Tom Lane [Mon, 5 Feb 2018 15:58:27 +0000 (10:58 -0500)]
Ensure that all temp files made during pg_upgrade are non-world-readable.
pg_upgrade has always attempted to ensure that the transient dump files
it creates are inaccessible except to the owner. However, refactoring
in commit 76a7650c4 broke that for the file containing "pg_dumpall -g"
output; since then, that file was protected according to the process's
default umask. Since that file may contain role passwords (hopefully
encrypted, but passwords nonetheless), this is a particularly unfortunate
oversight. Prudent users of pg_upgrade on multiuser systems would
probably run it under a umask tight enough that the issue is moot, but
perhaps some users are depending only on pg_upgrade's umask changes to
protect their data.
To fix this in a future-proof way, let's just tighten the umask at
process start. There are no files pg_upgrade needs to write at a
weaker security level; and if there were, transiently relaxing the
umask around where they're created would be a safer approach.
Report and patch by Tom Lane; the idea for the fix is due to Noah Misch.
Back-patch to all supported branches.
Tom Lane [Mon, 5 Feb 2018 15:37:30 +0000 (10:37 -0500)]
Fix RelationBuildPartitionKey's processing of partition key expressions.
Failure to advance the list pointer while reading partition expressions
from a list results in invoking an input function with inappropriate data,
possibly leading to crashes or, with carefully crafted input, disclosure
of arbitrary backend memory.
Bug discovered independently by Álvaro Herrera and David Rowley.
This patch is by Álvaro but owes something to David's proposed fix.
Back-patch to v10 where the issue was introduced.
Tom Lane [Fri, 2 Feb 2018 23:26:07 +0000 (18:26 -0500)]
Be more wary about shm_toc_lookup failure.
Commit 445dbd82a basically missed the point of commit d46633506,
which was that we shouldn't allow shm_toc_lookup() failure to lead
to a core dump or assertion crash, because the odds of such a
failure should never be considered negligible. It's correct that
we can't expect the PARALLEL_KEY_ERROR_QUEUE TOC entry to be there
if we have no workers. But if we have no workers, we're not going
to do anything in this function with the lookup result anyway,
so let's just skip it. That lets the code use the easy-to-prove-safe
noError=false case, rather than anything requiring effort to review.
Investigation of 2d2d06b7e27e3177d5bef0061801c75946871db3 revealed that
identity values were not applied in some further cases, including
logical replication subscribers, VALUES RTEs, and ALTER TABLE ... ADD
COLUMN. To fix all that, apply the identity column expression in
build_column_default() instead of repeating the same logic at each call
site.
For ALTER TABLE ... ADD COLUMN ... IDENTITY, the previous coding
completely ignored that existing rows for the new column should have
values filled in from the identity sequence. The coding using
build_column_default() fails for this because the sequence ownership
isn't registered until after ALTER TABLE, and we can't do it before
because we don't have the column in the catalog yet. So we specially
remember in ColumnDef the sequence name that we decided on and build a
custom NextValueExpr using that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Bruce Momjian [Wed, 31 Jan 2018 21:43:32 +0000 (16:43 -0500)]
doc: Improve pg_upgrade rsync examples to use clusterdir
Commit 9521ce4a7a1125385fb4de9689f345db594c516a from Sep 13, 2017 and
backpatched through 9.5 used rsync examples with datadir. The reporter
has pointed out, and testing has verified, that clusterdir must be used,
so update the docs accordingly.
Reported-by: Don Seiler
Discussion: https://postgr.es/m/CAHJZqBD0u9dCERpYzK6BkRv=663AmH==DFJpVC=M4Xg_rq2=CQ@mail.gmail.com
Bruce Momjian [Wed, 31 Jan 2018 21:25:21 +0000 (16:25 -0500)]
doc: mention datadir locations are actually config locations
Technically, pg_upgrade's --old-datadir and --new-datadir are
configuration directories, not necessarily data directories. This is
reflected in the 'postgres' manual page, so do the same for pg_upgrade.
Robert Haas [Wed, 31 Jan 2018 20:43:11 +0000 (15:43 -0500)]
Fix list partition constraints for partition keys of array type.
The old code generated always generated a constraint of the form
col = ANY(ARRAY[val1, val2, ...]), but that's invalid when col is an
array type. Instead, generate col = val when there's only one value,
col = val1 OR col = val2 OR ... when there are multiple values and
col is of array type, and the old form when there are multiple values
and col is not of an array type.
As a side benefit, this makes constraint exclusion able to prune
a list partition declared to accept a single Boolean value, which
didn't work before.
Robert Haas [Tue, 30 Jan 2018 19:27:38 +0000 (14:27 -0500)]
Fix test case for 'outer pathkeys do not match mergeclauses' fix.
Commit 4bbf6edfbd5d03743ff82dda2f00c738fb3208f5 added a test case,
but it turns out that the test case doesn't reliably test for the
bug, and in the context of the regression test suite did not because
ANALYZE had not been run.
Report and patch by Etsuro Fujita. I added a comment along lines
previously suggested by Tom Lane.
Andres Freund [Mon, 29 Jan 2018 19:02:09 +0000 (11:02 -0800)]
Prevent growth of simplehash tables when they're "too empty".
In cases where simplehash tables where filled with either a lot of
conflicting hash-values, or values that hash to consecutive
values (i.e. build "chains") the growth heuristics in d4c62a6b623d6eef88218158e9fa3cf974c6c7e5 could trigger rather
explosively.
To fix that, address some of the reasons (see previous commit) of why
the growth heuristics where needed, and only allow growth when the
table isn't too empty. While that means there's a few cases of bad
input that can be slower, that seems a lot better than running very
quickly out of memory.
Author: Tomas Vondra and Andres Freund, with additional input by
Thomas Munro, Tom Lane Todd A. Cook Reported-By: Todd A. Cook, Tomas Vondra, Thomas Munro
Discussion: https://postgr.es/m/20171127185700.1470.20362@wrigleys.postgresql.org
Backpatch: 10, where simplehash was introduced
Andres Freund [Mon, 29 Jan 2018 19:02:09 +0000 (11:02 -0800)]
Improve bit perturbation in TupleHashTableHash.
The changes in b81b5a96f424531b97cdd1dba97d9d1b9c9d372e did not fully
address the issue, because the bit-mixing of the IV into the final
hash-key didn't prevent clustering in the input-data survive in the
output data.
This didn't cause a lot of problems because of the additional growth
conditions added d4c62a6b623d6eef88218158e9fa3cf974c6c7e5. But as we
want to rein those in due to explosive growth in some edges, this
needs to be fixed.
Author: Andres Freund
Discussion: https://postgr.es/m/20171127185700.1470.20362@wrigleys.postgresql.org
Backpatch: 10, where simplehash was introduced
Tom Lane [Sun, 28 Jan 2018 18:39:07 +0000 (13:39 -0500)]
Add stack-overflow guards in set-operation planning.
create_plan_recurse lacked any stack depth check. This is not per
our normal coding rules, but I'd supposed it was safe because earlier
planner processing is more complex and presumably should eat more
stack. But bug #15033 from Andrew Grossman shows this isn't true,
at least not for queries having the form of a many-thousand-way
INTERSECT stack.
Further testing showed that recurse_set_operations is also capable
of being crashed in this way, since it likewise will recurse to the
bottom of a parsetree before calling any support functions that
might themselves contain any stack checks. However, its stack
consumption is only perhaps a third of create_plan_recurse's.
It's possible that this particular problem with create_plan_recurse can
only manifest in 9.6 and later, since before that we didn't build a Path
tree for set operations. But having seen this example, I now have no
faith in the proposition that create_plan_recurse doesn't need a stack
check, so back-patch to all supported branches.
Tom Lane [Sat, 27 Jan 2018 21:42:28 +0000 (16:42 -0500)]
Update time zone data files to tzdata release 2018c.
DST law changes in Brazil, Sao Tome and Principe. Historical corrections
for Bolivia, Japan, and South Sudan. The "US/Pacific-New" zone has been
removed (it was only a link to America/Los_Angeles anyway).
Tom Lane [Sat, 27 Jan 2018 18:52:24 +0000 (13:52 -0500)]
Avoid crash during EvalPlanQual recheck of an inner indexscan.
Commit 09529a70b changed nodeIndexscan.c and nodeIndexonlyscan.c to
postpone initialization of the indexscan proper until the first tuple
fetch. It overlooked the question of mark/restore behavior, which means
that if some caller attempts to mark the scan before the first tuple fetch,
you get a null pointer dereference.
The only existing user of mark/restore is nodeMergejoin.c, which (somewhat
accidentally) will never attempt to set a mark before the first inner tuple
unless the inner child node is a Material node. Hence the case can't arise
normally, so it seems sufficient to document the assumption at both ends.
However, during an EvalPlanQual recheck, ExecScanFetch doesn't call
IndexNext but just returns the jammed-in test tuple. Therefore, if we're
doing a recheck in a plan tree with a mergejoin with inner indexscan,
it's possible to reach ExecIndexMarkPos with iss_ScanDesc still null,
as reported by Guo Xiang Tan in bug #15032.
Really, when there's a test tuple supplied during an EPQ recheck, touching
the index at all is the wrong thing: rather, the behavior of mark/restore
ought to amount to saving and restoring the es_epqScanDone flag. We can
avoid finding a place to actually save the flag, for the moment, because
given the assumption that no caller will set a mark before fetching a
tuple, es_epqScanDone must always be set by the time we try to mark.
So the actual behavior change required is just to not reach the index
access if a test tuple is supplied.
The set of plan node types that need to consider this issue are those
that support EPQ test tuples (i.e., call ExecScan()) and also support
mark/restore; which is to say, IndexScan, IndexOnlyScan, and perhaps
CustomScan. It's tempting to try to fix the problem in one place by
teaching ExecMarkPos() itself about EPQ; but ExecMarkPos supports some
plan types that aren't Scans, and also it seems risky to make assumptions
about what a CustomScan wants to do here. Also, the most likely future
change here is to decide that we do need to support marks placed before
the first tuple, which would require additional work in IndexScan and
IndexOnlyScan in any case. Hence, fix the EPQ issue in nodeIndexscan.c
and nodeIndexonlyscan.c, accepting the small amount of code duplicated
thereby, and leave it to CustomScan providers to fix this bug if they
have it.
Back-patch to v10 where commit 09529a70b came in. In earlier branches,
the index_markpos() call is a waste of cycles when EPQ is active, but
no more than that, so it doesn't seem appropriate to back-patch further.
projects / postgresql / log