Add information about the -o option to zpool replace
Users need to be aware that when replacing devices in an existing
pool they may need to override automatically detected ashift value.
This will all depend on the exact hardware they are using.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2024
Brian Behlendorf [Thu, 12 Jun 2014 20:11:26 +0000 (13:11 -0700)]
Fix zfs.spec.in defaults
Commit 2ee4e7da accidentally introduced two issues which only occur
when rebuilding the ZFS source rpm outside the ZFS build system.
1) The _dracutdir, _udevdir, and _udevruledir macros must be checked
using the 'undefined' keyword. This was just overlooked in the
patch review and does not cause a failure when using 'make pkg'
because the values are provided by the make target.
2) The default _udevruledir path included a typo.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2310
Accept udev and dracut paths specified by ./configure
There are two common locations where udev and dracut components are
commonly installed. When building packages using the 'make rpm|deb'
targets check those common locations and pass them to rpmbuild. For
non-standard configurations these values can be provided by the
the following configure options:
When rebuilding using the source packages the per-distribution
default values specified in the spec file will be used. This is
the preferred way to build packages for a distribution but the
ability to override the defaults is provided as a convenience.
1) While we have slightly more headroom in user space excessively
deep stacks have been observed while running ztest, see #2293.
2) Removing this conditional makes the pipeline behave consistently
regardless of if it's executing in kernel space or user space.
This way we're more likely to uncover subtle issues with ztest.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2384
These options have existed for a long time but have historically
been undocumented because they are not guaranteed to be safe. They
should only be used as a last resort when attempting to recover a
damaged pool.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1130
* Remove the references to share(1M), unshare(1M) and dfstab(4)
since they are not applicable to Linux.
* Add the exact exportfs command line used when setting sharenfs=on.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue: #1641
Document the fact that ashift is vdev specific, not a pool global.
Users need to be aware that when adding devices to an existing pool
they may need to override automatically detected ashift value.
This will all depend on the exact hardware they are using.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2024
Only automatically mount a clone when 'canmount == on'.
According to the man page, "When the noauto option is set, a dataset
can only be mounted and unmounted explicitly. The dataset is not
mounted automatically when the dataset is created or imported ...."
When cloning a dataset the canmount property was not being honored.
This patch adds the required check to achieve the behavior described
in the man page.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2241
Accept kernel source dir(s) specified by ./configure
This adds ability to set the location of the kernel via defines
when building from the spec files. This is useful when building
against a kernel installed in a non-standard location.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1874
From day one the various ZFS libraries should have been placed in their
own sub-packages. Primarily this allows for multiple major versions of
the libraries to be concurrently installed. It also facilitates a
smaller build environment by minimizing the required dependencies.
The specific changes required to split the libraries from the utilities
are as follows:
* libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added
and contain the versioned shared libraries. The Fedora packaging
guidelines discourage providing static libraries so they are not
included in the packages.
* The zfs-devel package was renamed libzfs2-devel and the new package
obsoletes the old zfs-devel package. This package includes all
the required headers for the libzpool2, libnvpair1, libuutil1, and
libzfs2 libraries and their respective unversioned shared libraries.
This package should eventually be split in to individual lib*-devel
packages but it will still take some work to cleanly separate them.
Therefore the libzfs2-devel package provides the expected lib*-devel
packages so the all proper dependencies can still be created.
* The /usr/share/doc/ files were moved in to the libzfs2-devel package.
* Updated config/deb.am to be aware of the packaging changes. This
ensures that 'deb-utils' make target converts all the resulting
packages generated by the 'rpm-utils' target.
Richard Yao [Wed, 23 Apr 2014 04:04:41 +0000 (00:04 -0400)]
Remove superfluous statement
Clang's static analyzer reported that the value assigned to pcksum is
never used. That is because we initialize both zc and pcksum to {{ 0 }}
and then do `pcksum = zc;`. That is fairly pointless. However, it has
the effect of generating a false positive in Clang's static analyzer.
Since noise from false positives can obscure real issues, we fix it
anyway.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2330
Richard Yao [Wed, 23 Apr 2014 03:35:38 +0000 (23:35 -0400)]
Fix memory leak in zpool_clear_label()
Clang's static analyzer reported a memory leak in zpool_clear_label().
Upon review, it turns out to be right. This should be a very short lived
leak because no daemons use this functionality, but that does not
preclude the possibility of third party daemons that do use it. Lets fix
it to be a good Samaritan.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2330
Chris Wedgwood [Tue, 27 May 2014 00:09:45 +0000 (17:09 -0700)]
Allow building without ACLs
Some kernel definitions were buried inside the #if... #endif logic for
ACLs. When ACLs are not available these definitions get lost causing
the build to fail.
Signed-off-by: Chris Wedgwood <cw@f00f.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2349
Brian Behlendorf [Thu, 29 May 2014 20:36:24 +0000 (13:36 -0700)]
Fix DKMS package upgrade and packager
Running 'yum upgrade zfs-dkms' package could appear to work properly
and still leave you with no zfs modules installed. This will occur
when only the zfs release, and not the version, are incremented.
This may be the case for a fast moving zfs-testing repository.
During the upgrade process DKMS will realize that zfs-x.y.z is already
installed and remove it. DKMS then correctly builds the new modules
for zfs-x.y.z. However, as a final step when the old zfs-x.y.z-r is
removed the %preun script runs and removes the newly build modules.
To handle this case the %preun script has been updated to only run
when the installed version exactly matches the full spec file version.
This change also updated ChangeLog section based on the DKMS
reference spec file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Brian Behlendorf [Thu, 29 May 2014 22:03:43 +0000 (15:03 -0700)]
Restrict release number to META version
When creating packages in a git repository the release number
can be automatically set by 'git describe'. This normally works
well but if your repository has newer tags which match the form
NAME-VERSION* the release may be incorrectly calculated. To
prevent this the match patten has been restricted to the contents
of the META file, NAME-VERSION.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Brian Behlendorf [Thu, 15 May 2014 01:17:39 +0000 (18:17 -0700)]
Use default slab types
We should not override the default memory type of the kmem cache. This
was done previously to force certain objects which were slightly over
object size limit cut off in to KMC_KMEM caches for better performance.
The zfsonlinux/spl#356 patch slightly increases the default cut off
from 511 bytes 1024 bytes for x86_64. This means there is long longer
a need to override the default for the caches. And since the default
values are now being used the new spl_kmem_cache_slab_limit and
spl_kmem_cache_kmem_limit tunables will apply to all kmem caches.
The following is a list of caches that will be impacted:
Marcel Huber [Wed, 21 May 2014 09:17:23 +0000 (11:17 +0200)]
Omit compiler warning by sticking to RAII
Resolve gcc 4.9.0 20140507 warnings about uninitialized 'ptr' when
using -Wmaybe-uninitialized. The first two cases appears appear
to be legitimate but not the second two. In general this is a
good practice so they are all initialized.
Signed-off-by: Marcel Huber <marcelhuberfoo@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2345
Tim Chase [Sun, 11 May 2014 01:13:12 +0000 (20:13 -0500)]
Calculate header size correctly in sa_find_sizes()
In the case where a variable-sized SA overlaps the spill block pointer and
a new variable-sized SA is being added, the header size was improperly
calculated to include the to-be-moved SA. This problem could be
reproduced when xattr=sa enabled as follows:
ln -s $(perl -e 'print "x" x 120') blah
setfattr -n security.selinux -v blahblah -h blah
The symlink is large enough to interfere with the spill block pointer and
has a typical SA registration as follows (shown in modified "zdb -dddd"
<SA attr layout obj> format):
[ ... ZPL_DACL_COUNT ZPL_DACL_ACES ZPL_SYMLINK ]
Adding the SA xattr will attempt to extend the registration to:
Tim Chase [Thu, 8 May 2014 14:51:01 +0000 (09:51 -0500)]
Allow for lock-free reading zfsdev_state_list.
Restructure the zfsdev_state_list to allow for lock-free reading by
converting to a simple singly-linked list from which items are never
deleted and over which only forward iterations are performed. It depends
on, among other things, the atomicity of accessing the zs_minor integer
and zs_next pointer.
This fixes a lock inversion in which the zfsdev_state_lock is used by
both the sync task (txg_sync) and indirectly by any user program which
uses /dev/zfs; the zfsdev_release method uses the same lock and then
blocks on the sync task.
The most typical failure scenerio occurs when the sync task is cleaning
up a user hold while various concurrent "zfs" commands are in progress.
Neither Illumos nor Solaris are affected by this issue because they use
DDI interface which provides lock-free reading of device state via the
ddi_get_soft_state() function.
Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2301
Richard Yao [Sat, 17 May 2014 13:35:10 +0000 (09:35 -0400)]
Handle ZPOOL_STATUS_HOSTID_MISMATCH in zpool status
Verbatim imports can cause hostid mismatches, but things otherwise work. `zpool
status` does not handle this and will fail when assertions are enabled:
Lets instead add a case to display an informative message such as this:
```
pool: rpool
state: ONLINE
status: Mismatch between pool hostid and system hostid on imported pool.
This pool was previously imported into a system with a different hostid,
and then was verbatim imported into this system.
action: Export this pool on all systems on which it is imported.
Then import it to correct the mismatch.
see: http://zfsonlinux.org/msg/ZFS-8000-EY
scan: scrub repaired 0 in 0h8m with 0 errors on Thu Apr 17 19:43:57 2014
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
sda ONLINE 0 0 0
errors: No known data errors
```
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2342
Chunwei Chen [Tue, 13 May 2014 02:36:35 +0000 (10:36 +0800)]
Use a dedicated taskq for vdev_file
Originally, vdev_file used system_taskq. This would cause a deadlock,
especially on system with few CPUs. The reason is that the prefetcher
threads, which are on system_taskq, will sometimes be blocked waiting
for I/O to finish. If the prefetcher threads consume all the tasks in
system_taskq, the I/O cannot be served and thus results in a deadlock.
We fix this by creating a dedicated vdev_file_taskq for vdev_file I/O.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2270
Handle vdev_lookup_top() failure in dva_get_dsize_sync()
The dva_get_dsize_sync() function incorrectly assumes that the call
to vdev_lookup_top() cannot fail. However, the NULL dereference at
clearly shows that under certain circumstances it is possible. Note
that offset 0x570 (1376) maps as expected to vd->vdev_deflate_ratio.
BUG: unable to handle kernel NULL pointer dereference at 00000570
Given that this can happen this patch add the required error handling.
In the case where vdev_lookup_top() fails assume that no deflation
will occur for the DVA and use the asize.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Alexey Zhuravlev <alexey.zhuravlev@intel.com>
Closes #1707
Closes #1987
Closes #1891
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tim Chase [Mon, 21 Apr 2014 18:22:08 +0000 (13:22 -0500)]
Check the dataset type more rigorously when fetching properties.
When fetching property values of snapshots, a check against the head
dataset type must be performed. Previously, this additional check was
performed only when fetching "version", "normalize", "utf8only" or "case".
This caused the ZPL properties "acltype", "exec", "devices", "nbmand",
"setuid" and "xattr" to be erroneously displayed with meaningless values
for snapshots of volumes. It also did not allow for the display of
"volsize" of a snapshot of a volume.
This patch adds the headcheck flag paramater to zfs_prop_valid_for_type()
and zprop_valid_for_type() to indicate the check is being done
against a head dataset's type in order that properties valid only for
snapshots are handled correctly. This allows the the head check in
get_numeric_property() to be performed when fetching a property for
a snapshot.
Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2265
1) This is a small piece of the metaslab improvement patch from
Illumos. It was worth bringing over before the rest, since it's
low risk and it can be useful on fragmented pools (e.g. Lustre
MDTs). metaslab_debug_unload would give the performance benefit
of the old metaslab_debug option without causing unwanted delay
during pool import.
Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2227
When the system attributes (SAs) for an object exceed what can
can be stored in the bonus area of a dnode a spill block is
allocated. These spill blocks are currently considered data
blocks. However, they should be accounted for as meta data
because they are effectively an extension of the dnode.
While this may seem like a minor accounting issue it has broader
implications. The key thing to be aware of is that each spill
block will hold a reference on its parent dnode. The dnode in
turn holds a reference on its dbuf in the dnode object. This
means that a single 512 byte data buffer for a spill block can
pin over 16k of meta data. This is analogous to the small file
situation described in 2b13331 where a relatively small number
of data buffer can cause the ARC to exceed the meta limit.
However, unlike the small file case a spill block can legitimately
be considered meta data. By changing the spill block to meta data
they will now be dropped from the cache when the meta limit is
reached. This then allows the dnodes and dbufs which the spill
block was pinning to be released.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <surya1@llnl.gov>
Closes #2294
The default SELinux policy for RHEL and Fedora has been updated
to include ZFS in the list of filesystems which support xattrs.
Therefore, there's no longer a need to detect this in the init
scripts.
Richard Yao [Wed, 30 Apr 2014 16:51:28 +0000 (12:51 -0400)]
ztest: Switch to LWP rwlock interface
ztest is intended to subject the ZFS code in userland to stress that it
should be able to withstand. Any failures that occur when running it are
failures that likely would occur inside the kernel. However, being in
userland, it is much easier to debug them. In practice, this prevents
a large number of problems from reaching production code.
A design decision was made by the original authors of ztest to make a
distinction between userland locking primitives and kernel locking
primitives. The ztest code itself calls userland locking primitives
while the kernel code being run in userland will call emulated kernel
locking primitives that wrap the userland locking primitives.
When ztest was first ported to Linux, a decision was made to use the
emulated kernel interfaces everywhere. In effect, the userland
rw_rdlock()/rw_wrlock() became the kernel rw_enter() and and the userland
rw_unlock() became the kernel rw_exit(). This caused a regression
because of an assertion in rw_enter() to catch recursive locking. That
is permitted in userland, but not in the kernel. Consequently, the ztest
code itself does recursive read locking. The use of the emulated kernel
interfaces consequently caused the following failure:
That occurs because ztest_dmu_objset_create_destroy() will take a read
lock and call ztest_dmu_object_alloc_free(). That will call ztest_io(),
which will take a readlock only when asked to do ZTEST_IO_REWRITE. This
triggered the assertion.
The pthreads rwlock interface was based on the LWP rwlock interface
implemented in Illumos libc. Luckily enough, the subset used by ztest is
almost identical, so we can solve this problem by switching to the LWP
thread rwlock interface in ztest. This eliminates a point of divergence
with Illumos and should make code sharing slightly easier.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1970
Richard Yao [Wed, 30 Apr 2014 17:12:27 +0000 (13:12 -0400)]
libspl: Implement LWP rwlock interface
This implements a subset of the LWP rwlock interface by wrapping the
equivalent POSIX thread interface. It is a superset of the features
needed by ztest.
The missing bits are {,_}rw_read_held() and {,_}rw_write_held().
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1970
Brian Behlendorf [Mon, 28 Apr 2014 20:56:47 +0000 (13:56 -0700)]
dmu_tx_assign() should not return ENOMEM
As described in the comment above dmu_tx_assign() this function must
only fail if the pool is out of space. If for some other reason the
TX cannot be assigned (such as memory pressure) ERESTART must be
returned. Alternately, EAGAIN could be returned to inject a delay
but that isn't required because the caller will block on the condition
variable waiting for the next TXG.
/*
* Assign tx to a transaction group. txg_how can be one of:
*
* (1) TXG_WAIT. If the current open txg is full, waits until there's
* a new one. This should be used when you're not holding locks.
* It will only fail if we're truly out of space (or over quota).
* ...
*/
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #2287
Richard Yao [Fri, 1 Jul 2011 22:56:35 +0000 (15:56 -0700)]
Implement File Attribute Support
We add support for lsattr and chattr to resolve a regression caused
by 88c283952f0bfeab54612f9ce666601d83c4244f that broke Python's
xattr.list(). That changet broke Gentoo Portage's FEATURES=xattr,
which depended on Python's xattr.list().
Only attributes common to both Solaris and Linux are supported. These
are 'a', 'd' and 'i' in Linux's lsattr and chattr commands. File
attributes exclusive to Solaris are present in the ZFS code, but cannot
be accessed or modified through this method. That was the case prior to
this patch. The resolution of issue zfsonlinux/zfs#229 should implement
some method to permit access and modification of Solaris-specific
attributes.
Original-patch-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1691
Richard Yao [Wed, 30 Apr 2014 02:42:09 +0000 (22:42 -0400)]
Refactor inode_owner_or_capable() autotools check
We need inode_owner_or_capable() for ZFS file attributes in addition to
xattrs, so it should go into its own file. This moves it into its own
file and changes it to be more comprehensive. It will now fail if no
known good API is detected.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1691
Fill in mountpoint buffer before using it in errors
zfs_is_mountable() fills in the mountpoint buffer, so, as in
upstream, it needs to have been called before the mountpoint
buffer can be used in error messages.
In particular,
return (zfs_error_fmt(hdl, EZFS_MOUNTFAILED,
dgettext(TEXT_DOMAIN, "cannot mount '%s'"),
mountpoint));
should not come before the call to zfs_is_mountable().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Closes #2284
Using the ARM reference simulation (fast model foundation v8) I
cross compiled spl and zfs, to confirm it works on ARMv8 (64 bit
arm architecture, called aarch64 in Linux).
As it is based on previous ARM porting, the resulting patch is
disappointingly small, there was very little to do. The code fixes
the compile issues and has light testing done.
Signed-off-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2260
Ned Bass [Fri, 18 Apr 2014 20:29:43 +0000 (13:29 -0700)]
Fix LZ4 endianness autodetection
Endianness detection in LZ4 is broken in user-space builds. This
bug corrupts compressed data and manifests itself in several ztest
failures. When LZ4 was originally ported to Illumos ZFS, the proper
checks for Linux were stripped out. The Linux port then inherited
the remaining detection code that works on Illumos but not on Linux.
The current LZ4 endianness check misuses the condition
defined(__BIG_ENDIAN) to indicate a big-endian system. On Linux
__BIG_ENDIAN is defined uncondtionally in the user-space header
/usr/include/endian.h, regardless of the endianness of the system.
The kernel does not use this header, so only user-space builds are
affected.
While we could fix this by restoring the upstream LZ4 endianness
detection code, reliable checks already exist in
libspl/include/sys/isa_defs.h. This change uses the libspl results
to replace the word-size and endianness checks in LZ4, simplifying
the code and reducing duplication.
Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: DHE <git@dehacked.net> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fixes #1963
Fixes #1964
Fixes #1965
Brian Behlendorf [Thu, 17 Apr 2014 17:06:37 +0000 (10:06 -0700)]
Fix zfsdev_ioctl() kmem leak warning
Due to an asymmetry in the kmem accounting a memory leak was being
reported when it was only an accounting issue. All memory allocated
with kmem_alloc() must be released with kmem_free() or it will not
be properly accounted for.
In this case the code used strfree() to release the memory allocated
by kmem_alloc(). Presumably this was done because the size of the
memory region wasn't available when the memory needed to be freed.
To resolve this issue the code has been updated to use strdup() instead
of kmem_alloc() to allocate the memory. Like strfree(), strdup() is
not integrated with the memory accounting. This means we can use
strfree() to release it like Illumos.
Brian Behlendorf [Wed, 16 Apr 2014 23:06:24 +0000 (16:06 -0700)]
Various zimport.sh fixes
1) $SPLSRC and $SRCDIR should be changed to $SRC_DIR. These are
vestiges of an earlier version of the script and were missed when
it was updated. Additionally ensure the directory is created.
2) The 'fail' function should take an integer argument for the
error code to return. Otherwise 0 (success) will be mistakenly
returned and errors will we incorrectly suppressed. The error
code should be meaningful enough to determine where the script
failed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tim Chase [Mon, 14 Apr 2014 15:33:16 +0000 (10:33 -0500)]
Report atime and relatime as the property's actual value.
Neither atime nor relatime should be considered to be "temporary mount
point properties". Their semantics are enforced completely within ZFS
and also they're (correctly) not documented as being temporary mount
point properties.
Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2257
Brian Behlendorf [Thu, 10 Apr 2014 23:03:33 +0000 (16:03 -0700)]
Make zimport.sh bash dependency explicit
Unfortunately, the zimport.sh test script really does depend on
bash. Moving to /bin/sh should be possible once the shared
infrastructure scripts it depends on is made portable.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Chunwei Chen [Sat, 29 Mar 2014 12:26:17 +0000 (20:26 +0800)]
Linux 3.14 compat: rq_for_each_segment in dmu_req_copy
rq_for_each_segment changed from taking bio_vec * to taking bio_vec.
We provide rq_for_each_segment4 which takes both.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
Chunwei Chen [Sat, 29 Mar 2014 11:49:55 +0000 (19:49 +0800)]
Refactor dmu_req_copy for immutable biovec changes
Originally, dmu_req_copy modifies bv_len and bv_offset in bio_vec so that it
can continue in subsequent passes. However, after the immutable biovec changes
in Linux 3.14, this is not allowed. So instead, we just tell dmu_req_copy how
many bytes are already copied and it will skip to the right spot accordingly.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
Chunwei Chen [Fri, 28 Mar 2014 07:08:21 +0000 (15:08 +0800)]
Linux 3.14 compat: Immutable biovec changes in vdev_disk.c
bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter.
This patch creates BIO_BI_*(bio) macros to hide the differences.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
Chunwei Chen [Fri, 28 Mar 2014 04:59:36 +0000 (12:59 +0800)]
Linux 3.14 compat: posix_acl_{create,chmod}
posix_acl_{create,chmod} is changed to __posix_acl_{create_chmod}
Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
Brian Behlendorf [Thu, 10 Apr 2014 17:44:00 +0000 (10:44 -0700)]
Improve zfs.sh error messages
Ensure an error message is logged when the 'zfs.sh' script fails
to either load a module or if udev fails to create the /dev/zfs
device. Error messages for missing KERNEL_MODULES are suppressed
because that functionality may just be built-in to the kernel.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Chris Dunlap [Tue, 8 Apr 2014 22:31:36 +0000 (15:31 -0700)]
Replace zed_file_create_dirs() with mkdirp()
When processing directory components starting from the root dir,
zed_file_create_dirs() contained a bug in checking the return value of
mkdir(). A typo was made, and the test for (mkdir_errno != EEXIST) was
erroneously written as (mkdir_errno == EEXIST). If some of the leading
directory components already existed, this bug would cause the routine
to exit before creating the remaining directory components.
Instead of fixing the above mkdir_errno test, this commit replaces
zed_file_create_dirs() with mkdirp(). This cleanup was already
planned, and zed_file_create_dirs() only existed because I didn't
realize mkdirp() was already in tree at the time.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2248
Chris Dunlap [Tue, 8 Apr 2014 22:31:11 +0000 (15:31 -0700)]
Set errno for mkdirp() called with NULL path ptr
If mkdirp() is called with a NULL ptr for the path arg, it will return
-1 with errno unchanged. This is unexpected since on error it should
return -1 and set errno to one of the error values listed for mkdir(2).
This commit sets errno = ENOENT for this NULL ptr case. This is in
accordance with the errors specified by mkdir(2):
ENOENT
A component of the path prefix does not exist or is a null pathname.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2248
Several of the in-tree regression tests depend on the availability
of loop devices. If for some reason no loop devices are available
the tests will fail.
Normally this isn't an issue because most Linux distributions create
8 loop devices by default. This is enough for our purposes. However,
recent Fedora releases have only been creating a single loop device
and this leads to failures. Alternately, if something else of the
system is using the loop devices we may see failures.
The fix for this is to update the support scripts to dynamically
create loop devices as needed. The scripts need only create a node
under /dev/ and the loop driver with create the minor. This behavior
has been supported by the loop driver for ages.
Additionally this patch updates cleanup_loop_devices() to cleanup
loop devices which have already had their file store deleted. This
helps prevent stale loop devices from accumulating on the system due
to test failures.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <surya1@llnl.gov>
Closes #2249
Richard Yao [Thu, 9 Jan 2014 17:52:10 +0000 (12:52 -0500)]
Improve partition detection on lesser used devices
The format strings in efi_get_info() are intended to extract both the
main device and partition number. However, this is only done correctly
for hd, sd and vd devices. The format strings for ram, dm-, md and loop
devices misparse the input. This causes the partition device to be
incorrectly labelled as the main device with the partition being
labelled 0.
Reported-by: ilovezfs <ilovezfs@icloud.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2175
When /etc/mtab is updated on Linux it's done atomically with
rename(2). A new mtab is written, the existing mtab is unlinked,
and the new mtab is renamed to /etc/mtab. This means that we
must close the old file and open the new file to get the updated
contents. Using rewind(3) will just move the file pointer back
to the start of the file, freopen(3) will close and open the file.
In this commit, a few more rewind(3) calls were replaced with freopen(3)
to allow updated mtab entries to be picked up immediately.
Signed-off-by: John M. Layman <jml@frijid.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2215
Issue #1611
Richard Yao [Tue, 25 Mar 2014 19:41:18 +0000 (15:41 -0400)]
Fix deadlock in zfs_zget()
zfsonlinux/zfs#180 occurred because of a race between inode eviction and
zfs_zget(). zfsonlinux/zfs@36df284 tried to address it by making a call
to the VFS to learn whether an inode is being evicted. If it was being
evicted the operation was retried after dropping and reacquiring the
relevant resources. Unfortunately, this introduced another deadlock.
This patch implements the original fix in a slightly different manner in
order to avoid both deadlocks. Instead of relying on a call to ilookup()
which can block in __wait_on_freeing_inode() the return value from igrab()
is used. This gives us the information that ilookup() provided without
the risk of a deadlock.
Alternately, this race could be closed by registering an sops->drop_inode()
callback. The callback would need to detect the active SA hold thereby
informing the VFS that this inode should not be evicted.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #180
Chris Dunlap [Wed, 2 Apr 2014 22:41:47 +0000 (15:41 -0700)]
Merge branch 'zed-initial'
zed monitors ZFS events. When a zevent is posted, zed will run any
scripts that have been enabled for the corresponding zevent class.
Multiple scripts may be invoked for a given zevent. The zevent nvpairs
are passed to the scripts as environment variables. Refer to the zed(8)
manpage for details.
Events are processed synchronously by the single thread, and there is
no maximum timeout for script execution. Consequently, a misbehaving
script can delay (or forever block) the processing of subsequent
zevents. Plans are to address this in future commits.
An EID (Event IDentifier) has been added to each event to uniquely
identify it throughout the lifetime of the loaded ZFS kernel module;
it is a monotonically increasing integer that resets to 1 each time
the module is loaded.
Initial scripts have been developed to log zevents to syslog,
automatically rebuild to a hot spare device, and send email in
response to checksum / data / io / resilver.finish / scrub.finish
zevents. To enable email notifications, configure ZED_EMAIL in zed.rc
(which is serving as a config file of sorts until a proper
configuration file is implemented). To enable hot sparing, uncomment
ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in zed.rc;
note that the autoexpand property is not yet supported.
zed is a work-in-progress.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
Chris Dunlap [Tue, 1 Apr 2014 21:21:56 +0000 (14:21 -0700)]
Replace check for _POSIX_MEMLOCK w/ HAVE_MLOCKALL
zed supports a '-M' cmdline opt to lock all pages in memory via
mlockall(). The _POSIX_MEMLOCK define is checked to determine whether
this function is supported. The current test assumes mlockall()
is supported if _POSIX_MEMLOCK is non-zero. However, this test is
insufficient according to mlock(2) and sysconf(3). If _POSIX_MEMLOCK
is -1, mlockall() is not supported; but if _POSIX_MEMLOCK is 0,
availability must be checked at runtime.
This commit adds an autoconf check for mlockall() to user.m4. The zed
code block for mlockall() is now guarded with a test for HAVE_MLOCKALL.
If defined, mlockall() will be called and its runtime availability
checked via its return value.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
Brian Behlendorf [Fri, 24 Jan 2014 23:47:46 +0000 (15:47 -0800)]
Add automatic hot spare functionality
When a vdev starts getting I/O or checksum errors it is now
possible to automatically rebuild to a hot spare device.
To cleanly support this functionality in a shell script some
additional information was added to all zevent ereports which
include a vdev. This covers both io and checksum zevents but
may be used but other scripts.
In the Illumos FMA solution the same information is required
but it is retrieved through the libzfs library interface.
Specifically the following members were added:
vdev_spare_paths - List of vdev paths for all hot spares.
vdev_spare_guids - List of vdev guids for all hot spares.
vdev_read_errors - Read errors for the problematic vdev
vdev_write_errors - Write errors for the problematic vdev
vdev_cksum_errors - Checksum errors for the problematic vdev.
By default the required hot spare scripts are installed but this
functionality is disabled. To enable hot sparing uncomment the
ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the
/etc/zfs/zed.d/zed.rc configuration file.
These scripts do no add support for the autoexpand property. At
a minimum this requires adding a new udev rule to detect when
a new device is added to the system. It also requires that the
autoexpand policy be ported from Illumos, see:
Brian Behlendorf [Fri, 24 Jan 2014 23:43:07 +0000 (15:43 -0800)]
Add missing DATA_TYPE_STRING_ARRAY output
This functionality has always been missing. But until now there
were no zevents which included an array of strings so it wasn't
missed. However, that's now changed so to ensure this information
is output correctly by 'zpool events -v' the DATA_TYPE_STRING_ARRAY
has been implemented.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
Brian Behlendorf [Fri, 24 Jan 2014 23:27:59 +0000 (15:27 -0800)]
Make command line guid parsing more tolerant
Several of the zfs utilities allow you to pass a vdev's guid rather
than the device name. However, the utilities are not consistent in
how they parse that guid. For example, 'zinject' expects the guid
to be passed as a hex value while 'zpool replace' wants it as a
decimal. The user is forced to just know what format to use.
This patch improve things by making the parsing more tolerant.
When strtol(3) is called using 0 for the base, rather than say
10 or 16, it will then accept hex, decimal, or octal input based
on the prefix. From the man page.
If base is zero or 16, the string may then include a "0x"
prefix, and the number will be read in base 16; otherwise,
a zero base is taken as 10 (decimal) unless the next character
is '0', in which case it is taken as 8 (octal).
NOTE: There may be additional conversions not caught be this patch.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
Chris Dunlap [Tue, 21 Jan 2014 21:30:03 +0000 (13:30 -0800)]
Initial implementation of zed (ZFS Event Daemon)
zed monitors ZFS events. When a zevent is posted, zed will run any
scripts that have been enabled for the corresponding zevent class.
Multiple scripts may be invoked for a given zevent. The zevent
nvpairs are passed to the scripts as environment variables.
Events are processed synchronously by the single thread, and there is
no maximum timeout for script execution. Consequently, a misbehaving
script can delay (or forever block) the processing of subsequent
zevents. Plans are to address this in future commits.
Initial scripts have been developed to log events to syslog
and send email in response to checksum/data/io errors and
resilver.finish/scrub.finish events. By default, email will only
be sent if the ZED_EMAIL variable is configured in zed.rc (which is
serving as a config file of sorts until a proper configuration file
is implemented).
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
zpool_events_next() can be called in blocking mode by specifying a
non-zero value for the "block" parameter. However, the design of
the ZFS Event Daemon (zed) requires additional functionality from
zpool_events_next(). Instead of adding additional arguments to the
function, it makes more sense to use flags that can be bitwise-or'd
together.
This commit replaces the zpool_events_next() int "block" parameter with
an unsigned bitwise "flags" parameter. It also defines ZEVENT_NONE
to specify the default behavior. Since non-blocking mode can be
specified with the existing ZEVENT_NONBLOCK flag, the default behavior
becomes blocking mode. This, in effect, inverts the previous use
of the "block" parameter. Existing callers of zpool_events_next()
have been modified to check for the ZEVENT_NONBLOCK flag.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
A corollary is that you should not use these variables except
in makefiles. For instance, instead of trying to evaluate
datadir in configure and hard-coding it in makefiles using e.g.,
'AC_DEFINE_UNQUOTED([DATADIR], ["$datadir"], [Data directory.])',
you should add -DDATADIR='$(datadir)' to your makefile's definition
of CPPFLAGS (AM_CPPFLAGS if you are also using Automake).
The runstatedir directory is for "installing data files which the
programs modify while they run, that pertain to one specific machine,
and which need not persist longer than the execution of the program".
Brian Behlendorf [Sat, 23 Nov 2013 00:00:39 +0000 (16:00 -0800)]
Clarify zpool_events_next() comment
Due to the very poorly chosen argument name 'cleanup_fd' it was
completely unclear that this file descriptor is used to track the
current cursor location. When the file descriptor is created by
opening ZFS_DEV a private cursor is created in the kernel for the
returned file descriptor. Subsequent calls to zpool_events_next()
and zpool_events_seek() then require the file descriptor as an
argument to reposition the cursor. When the file descriptor is
closed the kernel state tracking the cursor is destroyed.
This patch contains no functional change, it just changes a
few variable names and clarifies the documentation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
Brian Behlendorf [Fri, 22 Nov 2013 22:52:16 +0000 (14:52 -0800)]
Add zpool_events_seek() functionality
The ZFS_IOC_EVENTS_SEEK ioctl was added to allow user space callers
to seek around the zevent file descriptor by EID. When a specific
EID is passed and it exists the cursor will be positioned there.
If the EID is no longer cached by the kernel ENOENT is returned.
The caller may also pass ZEVENT_SEEK_START or ZEVENT_SEEK_END to seek
to those respective locations.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
Brian Behlendorf [Fri, 22 Nov 2013 19:20:41 +0000 (11:20 -0800)]
Add a unique "eid" value to all zevents
Tagging each zevent with a unique monotonically increasing EID
(Event IDentifier) provides the required infrastructure for a user
space daemon to reliably process zevents. By writing the EID to
persistent storage the daemon can safely resume where it left off
in the event stream when it's restarted.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
Gunnar Beutner [Fri, 21 Mar 2014 12:27:18 +0000 (13:27 +0100)]
Remount datasets for "zfs inherit".
Changing properties with "zfs inherit" should cause the datasets
to be remounted. This ensures that the modified property values
will be propagated in to the filesystem namespace where they can
be enforced. This change is modeled after an identical fix made
to zfs_prop_set().
Signed-off-by: Gunnar Beutner <gunnar@beutner.name> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2201
Richard Yao [Fri, 21 Mar 2014 15:10:36 +0000 (11:10 -0400)]
Linux 3.13 compat: Handle __must_check bdi_setup_and_register
torvalds/linux@8077c0d983ab276ec5f2700df56a64d671781905 added a
__must_check to the bdi_setup_and_register(), which caused our autotools
check to break. zfsonlinux/zfs@729210564a5325e190fc4fba22bf17bacf957ace
was intended to correct that, but it depended on -Wno-unused-result,
which is unrecognized in older GCC versions. That commit has been
reverted in favor of a solution that does not require
-Wno-unused-result.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2102
Closes #2135
Older GCC versions do not obey -Wno-unused-result. This reverts commit 729210564a5325e190fc4fba22bf17bacf957ace in favor of a solution that
does not require -Wno-unused-result.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1906
Yuri Pankov [Thu, 20 Mar 2014 22:21:37 +0000 (15:21 -0700)]
Illumos #3120 zinject hangs in zfsdev_ioctl() due to uninitialized zc
3120 zinject hangs in zfsdev_ioctl() due to uninitialized zc
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Chunwei Chen [Sat, 15 Mar 2014 06:24:40 +0000 (14:24 +0800)]
config: compile test rather than run test
When testing compiler flags, we only need to do compile test. Otherwise,
configure will fail with "configure: error: cannot run test program while
cross compiling" when cross compiling.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2191
Richard Yao [Mon, 1 Jul 2013 14:57:04 +0000 (10:57 -0400)]
Implement -t option to zpool import for temporary pool names
Originally, users had to handle spa namespace collisions by either
exporting the already imported pool or by specifying a new name for the
pool with a conflicting name. In the case of root pools from virtual
guests, neither approach to collision resolution is reasonable. This is
addressed by extending the new name syntax with a -t option to specify
that the new name is temporary. When specified, this sets an internal
flag that is passed into the kernel to tell it that all label updates
should refer to the name used in the original label. Consequently, the
original pool name will be retained on export.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2189
Richard Yao [Tue, 21 Jan 2014 00:47:21 +0000 (19:47 -0500)]
Assert alignment in umem_alloc_aligned
Valgrind suggests that the address we are returning is not properly
aligned, so lets add an assertion.
==87740== Address 0x1012a22a is 554 bytes inside a block of size 4,096
alloc'd
==87740== at 0x4C2BBA0: memalign (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==87740== by 0x4C2BCC7: posix_memalign (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==87740== by 0x52FA845: zio_buf_alloc (umem.h:101)
==87740== by 0x52F6226: zil_alloc_lwb (zil.c:463)
==87740== by 0x52F8559: zil_commit (zil.c:566)
==87740== by 0x40611D: ztest_freeze (ztest.c:5909)
==87740== by 0x4066A7: ztest_init (ztest.c:6048)
==87740== by 0x407AF4: main (ztest.c:6226)
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2174
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #2156
Richard Yao [Thu, 26 Dec 2013 20:51:35 +0000 (15:51 -0500)]
Switch ztest mmap(2) ASSERTs to VERIFYs
This is just a small bit of cleanup to ensure ztest fails early
on systems where mmap(2) is not functioning. For the automated
testing which is the primary consumer of ztest there is no
functional change because debugging is always enabled.
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2177
Isaac Huang [Tue, 11 Mar 2014 05:27:56 +0000 (23:27 -0600)]
Make arcstat.py default to one header per screen
Today arcstat.py prints one header every hdr_intr (20 by default)
lines. It would be more consistent with out utilities like vmstat
if hdr_intr defaulted to terminal window size, i.e. one header
per screenful of outputs.
Signed-off-by: Isaac Huang <he.huang@intel.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2183
In Debian GNU/Linux a program called 'linitian' is used to make sure
that packages conforms to the Debian GNU/Linux packaging guide lines.
This fixes the problem reported as:
A race-induced use after free occurs in arc_release() where the
ARC header is used outside the critical section protected by the
hash_lock.
Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #2162
These are needed by consumers (i.e. Lustre) who wish to perform a
callback in the syncing context. Both a blocking and non-blocking
version are available to callers.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ned Bass [Fri, 28 Feb 2014 23:07:00 +0000 (15:07 -0800)]
Improve reporting of tx assignment wait times
Some callers of dmu_tx_assign() use the TXG_NOWAIT flag and call
dmu_tx_wait() themselves before retrying if the assignment fails.
The wait times for such callers are not accounted for in the
dmu_tx_assign kstat histogram, because the histogram only records
time spent in dmu_tx_assign(). This change moves the histogram
update to dmu_tx_wait() to properly account for all time spent there.
One downside of this approach is that it is possible to call
dmu_tx_wait() multiple times before successfully assigning a
transaction, in which case the cumulative wait time would not be
recorded. However, this case should not often arise in practice,
because most callers currently use one of these forms:
The first form should make just one call to dmu_tx_delay() inside of
dmu_tx_assign(). The second form retries with TXG_WAITED if the first
assignment fails and incurs a delay, in which case no further waiting
is performed. Therefore transaction delays normally occur in one
call to dmu_tx_wait() so the histogram should be fairly accurate.
Another possible downside of this approach is that the histogram will
no longer record overhead outside of dmu_tx_wait() such as in
dmu_tx_try_assign(). While I'm not aware of any reason for concern on
this point, it is conceivable that lock contention, long list
traversal, etc. could cause assignment delays that would not be
reflected in the histogram. Therefore the histogram should strictly
be used for visibility in to the normal delay mechanisms and not as a
profiling tool for code performance.
Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1915
projects / zfs / log