Tom Lane [Thu, 9 Feb 2017 20:49:57 +0000 (15:49 -0500)]
Blind try to fix portability issue in commit 8f93bd851 et al.
The S/390 members of the buildfarm are showing failures indicating
that they're having trouble with the rint() calls I added yesterday.
There's no good reason for that, and I wonder if it is a compiler bug
similar to the one we worked around in d9476b838. Try to fix it using
the same method as before, namely to store the result of rint() back
into a "double" variable rather than immediately converting to int64.
(This isn't entirely waving a dead chicken, since on machines with
wider-than-double float registers, the extra store forces a width
conversion. I don't know if S/390 is like that, but it seems worth
trying.)
In passing, merge duplicate ereport() calls in float8_timestamptz().
Robert Haas [Thu, 9 Feb 2017 20:10:09 +0000 (15:10 -0500)]
Remove all references to "xlog" from SQL-callable functions in pg_proc.
Commit f82ec32ac30ae7e3ec7c84067192535b2ff8ec0e renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Robert Haas [Thu, 9 Feb 2017 19:59:57 +0000 (14:59 -0500)]
simplehash: Additional tweaks to make specifying an allocator work.
Even if we don't emit definitions for SH_ALLOCATE and SH_FREE, we
still need prototypes. The user can't define them before including
simplehash.h because SH_TYPE isn't available yet.
For the allocator to be able to access private_data, it needs to
become an argument to SH_CREATE. Previously we relied on callers
to set that after returning from SH_CREATE, but SH_CREATE calls
SH_ALLOCATE before returning.
Robert Haas [Thu, 9 Feb 2017 19:02:58 +0000 (14:02 -0500)]
pageinspect: Fix hash_bitmap_info not to read the underlying page.
It did that to verify that the page was an overflow page rather than
anything else, but that means that checking the status of all the
overflow bits requires reading the entire index. So don't do that.
The new code validates that the page is not a primary bucket page
or bitmap page by looking at the metapage, so that using this on
large numbers of pages can be reasonably efficient.
Ashutosh Sharma, per a complaint from me, and with further
modifications by me.
Tom Lane [Thu, 9 Feb 2017 16:52:12 +0000 (11:52 -0500)]
Allow index AMs to cache data across aminsert calls within a SQL command.
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Andres Freund [Thu, 9 Feb 2017 00:58:21 +0000 (16:58 -0800)]
Add explicit ORDER BY to a few tests that exercise hash-join code.
A proposed patch, also by Thomas and in the same thread, would change
the output order of these. Independent of the follow-up patches
getting committed, nailing down the order in these specific tests at
worst seems harmless.
Author: Thomas Munro
Discussion: https://postgr.es/m/CAEepm=1D4-tP7j7UAgT_j4ZX2j4Ehe1qgZQWFKBMb8F76UW5Rg@mail.gmail.com
Tom Lane [Wed, 8 Feb 2017 23:04:59 +0000 (18:04 -0500)]
Fix roundoff problems in float8_timestamptz() and make_interval().
When converting a float value to integer microseconds, we should be careful
to round the value to the nearest integer, typically with rint(); simply
assigning to an int64 variable will truncate, causing apparently off-by-one
values in cases that should work. Most places in the datetime code got
this right, but not these two.
float8_timestamptz() is new as of commit e511d878f (9.6). Previous
versions effectively depended on interval_mul() to do roundoff correctly,
which it does, so this fixes an accuracy regression in 9.6.
The problem in make_interval() dates to its introduction in 9.4. Aside
from being careful to round not truncate, let's incorporate the hours and
minutes inputs into the result with exact integer arithmetic, rather than
risk introducing roundoff error where there need not have been any.
float8_timestamptz() problem reported by Erik Nordström, though this is
not his proposed patch. make_interval() problem found by me.
Robert Haas [Wed, 8 Feb 2017 20:45:30 +0000 (15:45 -0500)]
Add WAL consistency checking facility.
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
doc: Some improvements in CREATE SUBSCRIPTION ref page
Add link to description of libpq connection strings. Add link to
explanation of replication access control. This currently points to the
description of streaming replication access control, which is currently
the same as for logical replication, but that might be refined later.
Also remove plain-text passwords from the examples, to not encourage
that dubious practice.
Tom Lane [Tue, 7 Feb 2017 21:34:11 +0000 (16:34 -0500)]
Speed up "brin" regression test a little bit.
In the large DO block, collect row TIDs into array variables instead of
creating and dropping a pile of temporary tables. In a normal build,
this reduces the brin test script's runtime from about 1.1 sec to 0.4 sec
on my workstation. That's not all that exciting perhaps, but in a
CLOBBER_CACHE_ALWAYS test build, the runtime drops from 20 min to 17 min,
which is a little more useful. In combination with some other changes
I plan to propose, this will help provide a noticeable reduction in
cycle time for CLOBBER_CACHE_ALWAYS buildfarm critters.
Robert Haas [Tue, 7 Feb 2017 17:24:25 +0000 (12:24 -0500)]
Cache hash index's metapage in rel->rd_amcache.
This avoids a very significant amount of buffer manager traffic and
contention when scanning hash indexes, because it's no longer
necessary to lock and pin the metapage for every scan. We do need
some way of figuring out when the cache is too stale to use any more,
so that when we lock the primary bucket page to which the cached
metapage points us, we can tell whether a split has occurred since we
cached the metapage data. To do that, we use the hash_prevblkno field
in the primary bucket page, which would otherwise always be set to
InvalidBuffer.
This patch contains code so that it will continue working (although
less efficiently) with hash indexes built before this change, but
perhaps we should consider bumping the hash version and ripping out
the compatibility code. That decision can be made later, though.
Mithun Cy, reviewed by Jesper Pedersen, Amit Kapila, and by me.
Before committing, I made a number of cosmetic changes to the last
posted version of the patch, adjusted _hash_getcachedmetap to be more
careful about order of operation, and made some necessary updates to
the pageinspect documentation and regression tests.
Tom Lane [Tue, 7 Feb 2017 15:24:24 +0000 (10:24 -0500)]
Correct thinko in last-minute release note item.
The CREATE INDEX CONCURRENTLY bug can only be triggered by row updates,
not inserts, since the problem would arise from an update incorrectly
being made HOT. Noted by Alvaro.
Document the privileges required for each of the sequence functions.
This was already in the GRANT reference page, but also add it to the
function description for easier reference.
Avoid permission failure in pg_sequences.last_value
Before, reading pg_sequences.last_value would fail unless the user had
appropriate sequence permissions, which would make the pg_sequences view
cumbersome to use. Instead, return null instead of the real value when
there are no permissions.
From: Michael Paquier <michael.paquier@gmail.com> Reported-by: Shinoda, Noriyoshi <noriyoshi.shinoda@hpe.com>
Tom Lane [Mon, 6 Feb 2017 18:19:50 +0000 (13:19 -0500)]
Avoid returning stale attribute bitmaps in RelationGetIndexAttrBitmap().
The problem with the original coding here is that we might receive (and
clear) a relcache invalidation signal for the target relation down inside
one of the index_open calls we're doing. Since the target is open, we
would not drop the relcache entry, just reset its rd_indexvalid and
rd_indexlist fields. But RelationGetIndexAttrBitmap() kept going, and
would eventually cache and return potentially-obsolete attribute bitmaps.
The case where this matters is where the inval signal was from a CREATE
INDEX CONCURRENTLY telling us about a new index on a formerly-unindexed
column. (In all other cases, the lock we hold on the target rel should
prevent any concurrent change in index state.) Even just returning the
stale attribute bitmap is not such a problem, because it shouldn't matter
during the transaction in which we receive the signal. What hurts is
caching the stale data, because it can survive into later transactions,
breaking CREATE INDEX CONCURRENTLY's expectation that later transactions
will not create new broken HOT chains. The upshot is that there's a window
for building corrupted indexes during CREATE INDEX CONCURRENTLY.
This patch fixes the problem by rechecking that the set of index OIDs
is still the same at the end of RelationGetIndexAttrBitmap() as it was
at the start. If not, we loop back and try again. That's a little
more than is strictly necessary to fix the bug --- in principle, we
could return the stale data but not cache it --- but it seems like a
bad idea on general principles for relcache to return data it knows
is stale.
There might be more hazards of the same ilk, or there might be a better
way to fix this one, but this patch definitely improves matters and seems
unlikely to make anything worse. So let's push it into today's releases
even as we continue to study the problem.
The example of using CREATE DATABASE with the ENCODING option did not
work anymore (except in special circumstances) and did not represent a
good general-purpose example, so write some new examples.
Tom Lane [Mon, 6 Feb 2017 16:31:23 +0000 (11:31 -0500)]
Update comment in relcache.c.
Commit 665d1fad9 introduced rd_pkindex, and made RelationGetIndexList
responsible for updating it, but didn't bother to fix
RelationGetIndexList's header comment to say so.
Robert Haas [Fri, 3 Feb 2017 21:28:13 +0000 (16:28 -0500)]
pageinspect: More type-sanity surgery on the new hash index code.
Uniformly expose unsigned quantities using the next-wider signed
integer type (since we have no unsigned types at the SQL level).
At the SQL level, this results a change to report itemoffset as
int4 rather than int2. Also at the SQL level, report one value
that is an OID as type oid. Under the hood, uniformly use macros
that match the SQL output type as to both width and signedness.
Robert Haas [Fri, 3 Feb 2017 19:35:25 +0000 (14:35 -0500)]
pgstattuple: Add pgstathashindex.
Since pgstattuple v1.5 hasn't been released yet, no need for a new
extension version. The new function exposes statistics about hash
indexes similar to what other pgstatindex functions return for other
index types.
Ashutosh Sharma, reviewed by Kuntal Ghosh. Substantial further
revisions by me.
Fujii Masao [Fri, 3 Feb 2017 18:18:13 +0000 (03:18 +0900)]
Be sure to release LogicalRepLauncherLock in DROP SUBSCRIPTION command.
Previously DROP SUBSCRIPTION command forgot to release the lock at all.
Original patches by Kyotaro Horiguchi and Michael Paquier,
but I didn't use them.
Discussion: http://postgr.es/m/20170201.173623.66249355.horiguchi.kyotaro@lab.ntt.co.jp
Tom Lane [Fri, 3 Feb 2017 16:34:41 +0000 (11:34 -0500)]
In pageinspect/hashfuncs.c, avoid crashes on alignment-picky machines.
On machines with MAXALIGN = 8, the payload of a bytea is not maxaligned,
since it will start 4 bytes into a palloc'd value. On alignment-picky
hardware, this will cause failures in accesses to 8-byte-wide values
within the page. We already encountered this problem when we introduced
GIN index inspection functions, and fixed it in commit 84ad68d64. Make
use of the same function for hash indexes.
A small difficulty is that up to now contrib/pageinspect has not shared
any functions at all across files. To support that, introduce a common
header file "pageinspect.h" for the module.
Also, move get_page_from_raw() out of ginfuncs.c, where it didn't
especially belong, and put it in rawpage.c which seems a more natural home.
Tom Lane [Fri, 3 Feb 2017 04:11:08 +0000 (23:11 -0500)]
Fix a bunch more portability bugs in commit 08bf6e529.
It seems like somebody used a dartboard while choosing integer widths
for the various values taken and returned by these functions ... and
then threw a fresh set of darts while writing the SQL declarations.
This patch brings the C code into line with what the SQL declarations
say, which is enough to make it not dump core on the particular 32-bit
machine I'm testing on. But I think we could do with another round
of looking at what the datum widths *should* be. For instance, it's
not all that sensible that hash_bitmap_info decided to use int64 to
represent a BlockNumber input when get_raw_page doesn't do it that way.
There's also a remaining problem that the expected outputs from the
test script are platform-dependent, but I'll leave that issue for
somebody else.
Robert Haas [Fri, 3 Feb 2017 03:29:29 +0000 (22:29 -0500)]
pageinspect: Try to fix some bugs in previous commit.
Commit 08bf6e529587e1e9075d013d859af2649c32a511 seems not to have
used the correct *GetDatum and PG_GETARG_* macros for the SQL types
in some cases, and some of the SQL types seem to have been poorly
chosen, too. Try to fix it. I'm not sure if this is the reason
why the buildfarm is currently unhappy with this code, but it
seems like a good place to start.
Tom Lane [Fri, 3 Feb 2017 01:16:17 +0000 (20:16 -0500)]
Clean up psql's behavior for a few more control variables.
Modify FETCH_COUNT to always have a defined value, like other control
variables, mainly so it will always appear in "\set" output.
Add hooks to force HISTSIZE to be defined and require it to have an
integer value. (I don't see any point in allowing it to be set to
non-integral values.)
Add hooks to force IGNOREEOF to be defined and require it to have an
integer value. Unlike the other cases, here we're trying to be
bug-compatible with a rather bogus externally-defined behavior, so I think
we need to continue to allow "\set IGNOREEOF whatever". Fix it so that
the substitution hook silently replace non-numeric values with "10",
so that the stored value always reflects what we're really doing.
Add a dummy assign hook for HISTFILE, just so it's always in
variables.c's list. We can't require it to be defined always, because
that would break the interaction with the PSQL_HISTORY environment
variable, so there isn't any change in visible behavior here.
Remove tab-complete.c's private list of known variable names, since that's
really a maintenance nuisance. Given the preceding changes, there are no
control variables it won't show anyway. This does mean that if for some
reason you've unset one of the status variables (DBNAME, HOST, etc), that
variable would not appear in tab completion for \set. But I think that's
fine, for at least two reasons: we shouldn't be encouraging people to use
those variables as regular variables, and if someone does do so anyway,
why shouldn't it act just like a regular variable?
Remove ugly and no-longer-used-anywhere GetVariableNum(). In general,
future additions of integer-valued control variables should follow the
paradigm of adding an assign hook using ParseVariableNum(), so there's
no reason to expect we'd need this again later.
Tom Lane [Fri, 3 Feb 2017 00:49:15 +0000 (19:49 -0500)]
Avoid improbable null pointer dereference in pgpassfileWarning().
Coverity complained that we might pass a null pointer to strcmp()
if PQresultErrorField were to return NULL. That shouldn't be possible,
since the server is supposed to always provide some SQLSTATE or other
in an error message. But we usually defend against such hazards, and
it only takes a little more code to do so here.
There's no good reason to think this is a live bug, so no back-patch.
Tom Lane [Fri, 3 Feb 2017 00:11:27 +0000 (19:11 -0500)]
Fix placement of initPlans when forcibly materializing a subplan.
If we forcibly place a Material node atop a finished subplan, we need
to move any initPlans attached to the subplan up to the Material node,
in order to keep SS_finalize_plan() happy. I'd figured this out in
commit 7b67a0a49 for the case of materializing a cursor plan, but out of
an abundance of caution, I put the initPlan movement hack at the call
site for that case, rather than inside materialize_finished_plan().
That was the wrong thing, because it turns out to also be necessary for
the only other caller of materialize_finished_plan(), ie subselect.c.
We lacked any test cases that exposed the mistake, but bug#14524 from
Wei Congrui shows that it's possible to get an initPlan reference into
the top tlist in that case too, and then SS_finalize_plan() complains.
Hence, move the hack into materialize_finished_plan().
In HEAD, also relocate some recently-added tests in subselect.sql, which
I'd unthinkingly dropped into the middle of a sequence of related tests.
Tom Lane [Thu, 2 Feb 2017 21:38:13 +0000 (16:38 -0500)]
Fix mishandling of tSRFs at different nesting levels.
Given a targetlist like "srf(x), f(srf(x))", split_pathtarget_at_srfs()
decided that it needed two levels of ProjectSet nodes, failing to notice
that the two SRF calls are textually equal(). Because of that, setrefs.c
would convert the upper ProjectSet's tlist to "Var1, f(Var1)" (where Var1
represents a reference to the srf(x) output of the lower ProjectSet).
This triggered an assertion in nodeProjectSet.c complaining that it found
no SRFs to evaluate, as reported by Erik Rijkers.
What we want in such a case is to evaluate srf(x) only once and use a plain
Result node to compute "Var1, f(Var1)"; that gives results similar to what
previous versions produced, whereas allowing srf(x) to be evaluated again
in an upper ProjectSet would square the number of rows emitted.
Furthermore, even if the SRF calls aren't textually identical, we want them
to be evaluated in lockstep, because that's what happened in the old
implementation. But split_pathtarget_at_srfs() got this completely wrong,
using two levels of ProjectSet for a case like "srf(x), f(srf(y))".
Hence, rewrite split_pathtarget_at_srfs() from the ground up so that it
groups SRFs according to the depth of nesting of SRFs in their arguments.
This is pretty much how we envisioned that working originally, but I blew
it when it came to implementation.
In passing, optimize the case of target == input_target, which I noticed
is not only possible but quite common.
Robert Haas [Thu, 2 Feb 2017 19:40:05 +0000 (14:40 -0500)]
Increase upper bound for bgwriter_lru_maxpages.
There is no particularly good reason to limit this value to 1000,
so increase the limit to INT_MAX / 2, the same limit we use for
shared_buffers. It's not clear how much practical effect larger
settings will have, but there seems no harm in letting people try it.
Robert Haas [Thu, 2 Feb 2017 19:12:58 +0000 (14:12 -0500)]
pageinspect: Support hash indexes.
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Noah Misch [Thu, 2 Feb 2017 16:21:16 +0000 (11:21 -0500)]
Code review for avoidance of direct cross-module links.
Remove $(pkglibdir) from $(rpathdir), since commits d51924be886c2a05e691fa05b16cb6b30ab8370f and eda04886c1e048d695728206504ab4198462168e removed direct linkage to
objects stored there. Users are unlikely to notice the difference.
Accompany every $(python_libspec) with $(python_additional_libs); this
doesn't fix a demonstrated bug, but it might do so on rare Python
configurations. With these changes, AIX ceases to be a special case.
Andrew Dunstan [Wed, 1 Feb 2017 22:52:35 +0000 (17:52 -0500)]
Don't count background workers against a user's connection limit.
Doing so doesn't seem to be within the purpose of the per user
connection limits, and has particularly unfortunate effects in
conjunction with parallel queries.
Backpatch to 9.6 where parallel queries were introduced.
David Rowley, reviewed by Robert Haas and Albe Laurenz.
Tom Lane [Wed, 1 Feb 2017 22:18:36 +0000 (17:18 -0500)]
Fix CatalogTupleInsert/Update abstraction for case of shared indstate.
Add CatalogTupleInsertWithInfo and CatalogTupleUpdateWithInfo to let
callers use the CatalogTupleXXX abstraction layer even in cases where
we want to share the results of CatalogOpenIndexes across multiple
inserts/updates for efficiency. This finishes the job begun in commit 2f5c9d9c9, by allowing some remaining simple_heap_insert/update
calls to be replaced. The abstraction layer is now complete enough
that we don't have to export CatalogIndexInsert at all anymore.
Also, this fixes several places in which 2f5c9d9c9 introduced performance
regressions by using retail CatalogTupleInsert or CatalogTupleUpdate even
though the previous coding had been able to amortize CatalogOpenIndexes
work across multiple tuples.
A possible future improvement is to arrange for the indexing.c functions
to cache the CatalogIndexState somewhere, maybe in the relcache, in which
case we could get rid of CatalogTupleInsertWithInfo and
CatalogTupleUpdateWithInfo again. But that's a task for another day.
Tom Lane [Wed, 1 Feb 2017 21:13:30 +0000 (16:13 -0500)]
Provide CatalogTupleDelete() as a wrapper around simple_heap_delete().
This extends the work done in commit 2f5c9d9c9 to provide a more nearly
complete abstraction layer hiding the details of index updating for catalog
changes. That commit only invented abstractions for catalog inserts and
updates, leaving nearby code for catalog deletes still calling the
heap-level routines directly. That seems rather ugly from here, and it
does little to help if we ever want to shift to a storage system in which
indexing work is needed at delete time.
Hence, create a wrapper function CatalogTupleDelete(), and replace calls
of simple_heap_delete() on catalog tuples with it. There are now very
few direct calls of [simple_]heap_delete remaining in the tree.
Robert Haas [Wed, 1 Feb 2017 18:42:41 +0000 (13:42 -0500)]
Refactor other replication commands to use DestRemoteSimple.
Commit a84069d9350400c860d5e932b50dfd337aa407b0 added a new type of
DestReceiver to avoid duplicating the existing code for the SHOW
command, but it turns out we can leverage that new DestReceiver
type in a few more places, saving some code.
Michael Paquier, reviewed by Andres Freund and by me.
Tom Lane [Wed, 1 Feb 2017 16:25:19 +0000 (11:25 -0500)]
Make psql's \set display variables in alphabetical order.
"\set" with no arguments displays all defined variables, but it does so
in the order that they appear in variables.c's list, which previously
was mostly creation order. That makes the list ugly and hard to find
things in, and it exposes some psql implementation details to users.
(For instance, ordinary variables will move to the bottom of the list
if unset and set again, but variables that have hooks won't.)
Fix that by keeping the list in alphabetical order at all times, which
isn't much more complicated than breaking out of the insertion search
loops once we reach an entry that should be after the one to be inserted.
Tom Lane [Wed, 1 Feb 2017 16:02:40 +0000 (11:02 -0500)]
Improve psql's behavior for \set and \unset of its control variables.
This commit improves on the results of commit 511ae628f in two ways:
1. It restores the historical behavior that "\set FOO" is interpreted
as setting FOO to "on", if FOO is a boolean control variable. We
already found one test script that was expecting that behavior, and
the psql documentation certainly does nothing to discourage people
from assuming that would work, since it often says just "if FOO is set"
when describing the effects of a boolean variable. However, now this
case will result in actually setting FOO to "on", not an empty string.
2. It arranges for an "\unset" of a control variable to set the value
back to its default value, rather than becoming apparently undefined.
The control variables are also initialized that way at psql startup.
In combination, these things guarantee that a control variable always
has a displayable value that reflects what psql is actually doing.
That is a pretty substantial usability improvement.
The implementation involves adding a second type of variable hook function
that is able to replace a proposed new value (including NULL) with another
one. We could alternatively have complicated the API of the assign hook,
but this way seems better since many variables can share the same
substitution hook function.
Also document the actual behavior of these variables more fully,
including covering assorted behaviors that were there before but
never documented.
This patch also includes some minor cleanup that should have been in 511ae628f but was missed.
Patch by me, but it owes a lot to discussions with Daniel Vérité.
Replace isMD5() with a more future-proof way to check if pw is encrypted.
The rule is that if pg_authid.rolpassword begins with "md5" and has the
right length, it's an MD5 hash, otherwise it's a plaintext password. The
idiom has been to use isMD5() to check for that, but that gets awkward,
when we add new kinds of verifiers, like the verifiers for SCRAM
authentication in the pending SCRAM patch set. Replace isMD5() with a new
get_password_type() function, so that when new verifier types are added, we
don't need to remember to modify every place that currently calls isMD5(),
to also recognize the new kinds of verifiers.
Also, use the new plain_crypt_verify function in passwordcheck, so that it
doesn't need to know about MD5, or in the future, about other kinds of
hashes or password verifiers.
Don't create "holes" in BufFiles, in the new logtape code.
The "Simplify tape block format" commit ignored the rule that blocks
returned by ltsGetFreeBlock() must be written out in the same order, at
least in the first write pass. To fix, relax that requirement, by making
ltsWriteBlock() to detect if it's about to create a "hole" in the
underlying BufFile, and fill it with zeros instead.
Reported, analysed, and reviewed by Peter Geoghegan.
Alvaro Herrera [Tue, 31 Jan 2017 21:42:24 +0000 (18:42 -0300)]
Tweak catalog indexing abstraction for upcoming WARM
Split the existing CatalogUpdateIndexes into two different routines,
CatalogTupleInsert and CatalogTupleUpdate, which do both the heap
insert/update plus the index update. This removes over 300 lines of
boilerplate code all over src/backend/catalog/ and src/backend/commands.
The resulting code is much more pleasing to the eye.
Also, by encapsulating what happens in detail during an UPDATE, this
facilitates the upcoming WARM patch, which is going to add a few more
lines to the update case making the boilerplate even more boring.
The original CatalogUpdateIndexes is removed; there was only one use
left, and since it's just three lines, we can as well expand it in place
there. We could keep it, but WARM is going to break all the UPDATE
out-of-core callsites anyway, so there seems to be no benefit in doing
so.
Stephen Frost [Tue, 31 Jan 2017 21:24:11 +0000 (16:24 -0500)]
pg_dump: Fix handling of ALTER DEFAULT PRIVILEGES
In commit 23f34fa, we changed how ACLs were handled to use the new
pg_init_privs catalog and to dump out the ACL commands as REVOKE+GRANT
combinations instead of trying to REVOKE all rights always and then
GRANT back just the ones which were in place.
Unfortunately, the DEFAULT PRIVILEGES system didn't quite get the
correct treatment with this change and ended up (incorrectly) only
including positive GRANTs instead of both the REVOKEs and GRANTs
necessary to preserve the correct privileges.
There are only a couple cases where such REVOKEs are possible because,
generally speaking, there's few rights which exist on objects by
default to be revoked.
Examples of REVOKEs which weren't being correctly preserved are when
privileges are REVOKE'd from the creator/owner, like so:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE SELECT ON TABLES FROM myrole;
or when other default privileges are being revoked, such as EXECUTE
rights granted to public for functions:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE EXECUTE ON FUNCTIONS FROM PUBLIC;
Fix this by correctly working out what the correct REVOKE statements are
(if any) and dump them out, just as we do for everything else.
Noticed while developing additional regression tests for pg_dump, which
will be landing shortly.
Stephen Frost [Tue, 31 Jan 2017 17:42:16 +0000 (12:42 -0500)]
perltidy pg_dump TAP tests
The pg_dump TAP tests have gotten pretty far from what perltidy thinks
they should be, so fix that, and in passing use long-form argument names
with arguments passed via "=" in a similar vein to 58da833.
No functional changes here, just whitespace and changing runs from
"-f" to "--file=", and similar.
Stephen Frost [Tue, 31 Jan 2017 16:17:38 +0000 (11:17 -0500)]
test_pg_dump: perltidy cleanup
As pointed out by Alvaro, we actually use perltidy on the perl scripts
in the source tree, so go back to the results of a perltidy run for the
test_pg_dump TAP script.
To make it look slightly less tragic, I changed most of the independent
arguments into long-form single arguments (eg: -f file.sql changed to be
--file=file.sql) to avoid having them confusingly split across lines due
to perltidy.
Tom Lane [Mon, 30 Jan 2017 23:42:41 +0000 (18:42 -0500)]
Simplify some long-obsolete code in hba.c's next_token().
next_token() oddly set its buffer space consumption limit to one before
the last char position in the buffer, not the last as you'd expect.
The reason is there was once an ugly kluge to mark keywords by appending
a newline to them, potentially requiring one more byte. Commit e5e2fc842
removed that kluge, but failed to notice that the length limit could be
increased.
Also, remove some vestigial handling of newline characters in the buffer.
That was left over from when this function read the file directly using
getc(). Commit 7f49a67f9 changed it to read from a buffer, from which
tokenize_file had already removed the only possible occurrence of newline,
but did not simplify this function in consequence.
Also, ensure that we don't return with *lineptr set to someplace past the
terminating '\0'; that would be catastrophic if a caller were to ask for
another token from the same line. This is just latent since no callers
actually do call again after a "false" return; but considering that it was
actually costing us extra code to do it wrong, we might as well make it
bulletproof.
Tom Lane [Mon, 30 Jan 2017 23:00:26 +0000 (18:00 -0500)]
Invent pg_hba_file_rules view to show the content of pg_hba.conf.
This view is designed along the same lines as pg_file_settings, to wit
it shows what is currently in the file, not what the postmaster has
loaded as the active settings. That allows it to be used to pre-vet
edits before issuing SIGHUP. As with the earlier view, go out of our
way to allow errors in the file to be reflected in the view, to assist
that use-case.
(We might at some point invent a view to show the current active settings,
but this is not that patch; and it's not trivial to do.)
Haribabu Kommi, reviewed by Ashutosh Bapat, Michael Paquier, Simon Riggs,
and myself
Tom Lane [Mon, 30 Jan 2017 22:15:42 +0000 (17:15 -0500)]
Add a regression test script dedicated to exercising system views.
Quite a few of our built-in system views were not exercised anywhere
in the regression tests. This is perhaps not so exciting for the ones
that are simple projections/joins of system catalogs, but for the ones
that are wrappers for set-returning C functions, the omission translates
directly to lack of test coverage for those functions.
In many cases, the reason for the omission is that the view doesn't have
much to do with any specific SQL feature, so there's no natural place to
test it. To remedy that, invent a new script sysviews.sql that's dedicated
to testing SRF-based views. Move a couple of tests that did fit this
charter into the new script, and add simple "count(*)" based tests of
other views within the charter. That's enough to ensure we at least
exercise the main code path through the SRF, although it does little to
prove that the output is sane.
More could be done here, no doubt, and I hope someone will think about
how we can test these views more thoroughly. But this is a starting
point.
Tom Lane [Mon, 30 Jan 2017 21:37:15 +0000 (16:37 -0500)]
Make psql reject attempts to set special variables to invalid values.
Previously, if the user set a special variable such as ECHO to an
unrecognized value, psql would bleat but store the new value anyway, and
then fall back to a default setting for the behavior controlled by the
variable. This was agreed to be a not particularly good idea. With
this patch, invalid values result in an error message and no change in
state.
(But this applies only to variables that affect psql's behavior; purely
informational variables such as ENCODING can still be set to random
values.)
To do this, modify the API for psql's assign-hook functions so that they
can return an OK/not OK result, and give them the responsibility for
printing error messages when they reject a value. Adjust the APIs for
ParseVariableBool and ParseVariableNum to support the new behavior
conveniently.
In passing, document the variable VERSION, which had somehow escaped that.
And improve the quite-inadequate commenting in psql/variables.c.
Daniel Vérité, reviewed by Rahila Syed, some further tweaking by me
Tom Lane [Mon, 30 Jan 2017 16:40:22 +0000 (11:40 -0500)]
Update time zone data files to tzdata release 2016j.
DST law changes in northern Cyprus (new zone Asia/Famagusta), Russia (new
zone Europe/Saratov), Tonga, Antarctica/Casey. Historical corrections for
Asia/Aqtau, Asia/Atyrau, Asia/Gaza, Asia/Hebron, Italy, Malta. Replace
invented zone abbreviation "TOT" for Tonga with numeric UTC offset; but
as in the past, we'll keep accepting "TOT" for input.
Stephen Frost [Mon, 30 Jan 2017 04:05:07 +0000 (23:05 -0500)]
Handle ALTER EXTENSION ADD/DROP with pg_init_privs
In commit 6c268df, pg_init_privs was added to track the initial
privileges of catalog objects and extensions. Unfortunately, that
commit didn't include understanding of ALTER EXTENSION ADD/DROP, which
allows the objects associated with an extension to be changed after the
initial CREATE EXTENSION script has been run.
The result of this meant that ACLs for objects added through
ALTER EXTENSION ADD were not recorded into pg_init_privs and we would
end up including those ACLs in pg_dump when we shouldn't have.
This commit corrects that by making sure to have pg_init_privs updated
when ALTER EXTENSION ADD/DROP is run, recording the permissions as they
are at ALTER EXTENSION ADD time, and removing any if/when ALTER
EXTENSION DROP is called.
This issue was pointed out by Moshe Jacobson as commentary on bug #14456
(which was actually a bug about versions prior to 9.6 not handling
custom ACLs on extensions correctly, an issue now addressed with
pg_init_privs in 9.6).
Back-patch to 9.6 where pg_init_privs was introduced.
Stephen Frost [Mon, 30 Jan 2017 04:05:07 +0000 (23:05 -0500)]
test_pg_dump TAP test whitespace cleanup
The formatting of the perl hashes used in the TAP tests for test_pg_dump
was rather horribly inconsistent and made it more difficult than it
really should have been to add new tests or adjust what tests are for
what runs, etc.
Robert Haas [Fri, 27 Jan 2017 21:22:11 +0000 (16:22 -0500)]
Refactor bitmap heap scan estimation of heap pages fetched.
Currently, we only need this logic in order to cost a Bitmap Heap
Scan. But a pending patch for Parallel Bitmap Heap Scan also uses
it to help figure out how many workers to use for the scan, which
has to be determined prior to costing. So, move the logic to
a separate function to make that easier.
Dilip Kumar. The patch series of which this is a part has been
reviewed by Andres Freund, Amit Khendekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, and me; it is not clear from the email
discussion which of those people have looked specifically at this
part.
Tom Lane [Fri, 27 Jan 2017 18:43:00 +0000 (13:43 -0500)]
Restructure hba.c to replace 3 parallel lists with single list of structs.
tokenize_file() now returns a single list of TokenizedLine structs,
carrying the same information as before. We were otherwise going to grow a
fourth list to deal with error messages, and that was getting a bit silly.
Tom Lane [Fri, 27 Jan 2017 03:09:34 +0000 (22:09 -0500)]
Use castNode() in a bunch of statement-list-related code.
When I wrote commit ab1f0c822, I really missed the castNode() macro that
Peter E. had proposed shortly before. This back-fills the uses I would
have put it to. It's probably not all that significant, but there are
more assertions here than there were before, and conceivably they will
help catch any bugs associated with those representation changes.
I left behind a number of usages like "(Query *) copyObject(query_var)".
Those could have been converted as well, but Peter has proposed another
notational improvement that would handle copyObject cases automatically,
so I let that be for now.
Andres Freund [Fri, 27 Jan 2017 00:47:03 +0000 (16:47 -0800)]
Use the new castNode() macro in a number of places.
This is far from a pervasive conversion, but it's a good starting
point.
Author: Peter Eisentraut, with some minor changes by me Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Andres Freund [Fri, 27 Jan 2017 00:47:03 +0000 (16:47 -0800)]
Add castNode(type, ptr) for safe casting between NodeTag based types.
The new function allows to cast from one NodeTag based type to
another, while asserting that the conversion is valid. This replaces
the common pattern of doing a cast and a Assert(IsA(ptr, type))
close-by.
As this seems likely to be used pervasively, we decided to backpatch
this change the addition of this macro. Otherwise backpatched fixes
are more likely not to work on back-branches.
On branches before 9.6, where we do not yet rely on inline functions
being available, the type assertion is only performed if PG_USE_INLINE
support is detected. The cast obviously is performed regardless.
For the benefit of verifying the macro compiles in the back-branches,
this commit contains a single use of the new macro. On master, a
somewhat larger conversion will be committed separately.
Author: Peter Eisentraut and Andres Freund Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Backpatch: 9.2-
Alvaro Herrera [Thu, 26 Jan 2017 20:45:22 +0000 (17:45 -0300)]
Remove test for COMMENT ON DATABASE
Our current DDL only allows a database name to be specified in COMMENT
ON DATABASE, which Andrew Dunstan reports to make this test fail on the
buildfarm. Remove the line until we gain a DDL command that allows the
current database to be operated on without having the specify it by
name.
Simon Riggs [Thu, 26 Jan 2017 18:14:02 +0000 (18:14 +0000)]
Reset hot standby xmin on master after restart
Hot_standby_feedback could be reset by reload and worked correctly, but if
the server was restarted rather than reloaded the xmin was not reset.
Force reset always if hot_standby_feedback is enabled at startup.
Tom Lane [Thu, 26 Jan 2017 17:17:47 +0000 (12:17 -0500)]
Ensure that a tsquery like '!foo' matches empty tsvectors.
!foo means "the tsvector does not contain foo", and therefore it should
match an empty tsvector. ts_match_vq() overenthusiastically supposed
that an empty tsvector could never match any query, so it forcibly
returned FALSE, the wrong answer. Remove the premature optimization.
Our behavior on this point was inconsistent, because while seqscans and
GIST index searches both failed to match empty tsvectors, GIN index
searches would find them, since GIN scans don't rely on ts_match_vq().
That makes this certainly a bug, not a debatable definition disagreement,
so back-patch to all supported branches.
Report and diagnosis by Tom Dunstan (bug #14515); added test cases by me.
Tom Lane [Wed, 25 Jan 2017 18:28:38 +0000 (13:28 -0500)]
Introduce convenience macros to hide JsonbContainer header accesses better.
This improves readability a bit and may make future improvements easier.
In passing, make sure that the JB_ROOT_IS_XXX macros deliver boolean (0/1)
results; the previous coding was a bug hazard, though no actual bugs are
known.
projects / postgresql / log