Junio C Hamano [Thu, 27 Apr 2006 00:08:00 +0000 (17:08 -0700)]
Merge branch 'fix'
* fix:
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
Junio C Hamano [Wed, 26 Apr 2006 23:55:25 +0000 (16:55 -0700)]
commit-tree.c: check_valid() microoptimization.
There is no point reading the whole object just to make sure it exists and
it is of the expected type. We added sha1_object_info() for such need
after this code was written, so use it.
When we are in a subdirectory of a git archive, we need to take the prefix
of that subdirectory into accoung when we verify filename arguments.
Noted by Matthias Lederhofer
This also uses the improved error reporting for all the other git commands
that use the revision parsing interfaces, not just git-rev-parse. Also, it
makes the error reporting for mixed filenames and argument flags clearer
(you cannot put flags after the start of the pathname list).
[jc: with fix to a trivial typo noticed by Timo Hirvonen]
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 26 Apr 2006 10:18:51 +0000 (03:18 -0700)]
commit-tree: allow generic object name for the tree as well.
We use get_sha1() for -p (parent) objects, but still used
get_sha1_hex() for the tree. Just to be consistent, allow
extended SHA1 expression for the tree object name.
Note that this is not to encourage funky things like this:
Junio C Hamano [Wed, 26 Apr 2006 09:27:59 +0000 (02:27 -0700)]
t0000-basic: Add ls-tree recursive test back.
When we updated ls-tree recursive output to omit the tree nodes, 246cc52f388cae8ca99e5a12b8458c9bfa467765 adjusted the old test
so that we do not expect to see trees in its output. Later,
with 0f8f45cb4a7e664b396f73c25891da46b953b8b8, we added back the
ability to show both with -t option, but we forgot to update the
test as well.
Junio C Hamano [Wed, 26 Apr 2006 06:11:17 +0000 (23:11 -0700)]
Makefile: remove and create libgit.a from scratch.
Foolishly I renamed diff.o around which caused an old diff.o
taken out of libgit.a and got linked into resulting binary and
exhibited mysterious breakage for many people. This borrows
from the kernel Makefile (scripts/Makefile.build) to first remove
the target and then recreate.
The set_reuse_addr() error case was the only error case in
socklist() where we returned rather than continued. Not sure
why. Either we must free the socklist, or continue. This patch
continues on error.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 0032d548db56eac9ea09b4ba05843365f6325b85 commit)
Petr Baudis [Mon, 24 Apr 2006 22:59:33 +0000 (00:59 +0200)]
Document the configuration file
This patch adds a Documentation/config.txt file included by git-repo-config
and currently aggregating hopefully all the available git plumbing / core
porcelain configuration variables, as well as briefly describing the format.
It also updates an outdated bit of the example in git-repo-config(1).
Paul Mackerras [Tue, 25 Apr 2006 00:00:03 +0000 (10:00 +1000)]
rev-parse: better error message for ambiguous arguments
Currently, if git-rev-parse encounters an argument that is neither a
recognizable revision name nor the name of an existing file or
directory, and it hasn't encountered a "--" argument, it prints an
error message saying "No such file or directory". This can be
confusing for users, including users of programs such as gitk that
use git-rev-parse, who may then think that they can't ask about the
history of files that no longer exist.
This makes it print a better error message, one that points out the
ambiguity and tells the user what to do to fix it.
Paul Mackerras [Sun, 23 Apr 2006 08:00:24 +0000 (18:00 +1000)]
gitk: Let git-rev-list do the argument list parsing
This is a fix for a problem reported by Jim Radford where an argument
list somewhere overflows on repositories with lots of tags. In fact
it's now unnecessary to use git-rev-parse since git-rev-list can take
all the arguments that git-rev-parse can. This is inspired by but not
the same as the solutions suggested by Jim Radford and Linus Torvalds.
Alex Riesen [Sun, 23 Apr 2006 07:01:29 +0000 (09:01 +0200)]
make update-index --chmod work with multiple files and --stdin
The patch makes "--chmod=-x" and "--chmod=+x" act like "--add"
and "--remove" to affect the behaviour of the command for the
rest of the path parameters, not just the following one.
Junio C Hamano [Sat, 22 Apr 2006 09:43:00 +0000 (02:43 -0700)]
Libify diff-index.
The second installment to libify diff brothers. The pathname
arguments are checked more strictly than before because we now
use the revision.c::setup_revisions() infrastructure.
Junio C Hamano [Sat, 22 Apr 2006 06:57:45 +0000 (23:57 -0700)]
Libify diff-files.
This is the first installment to libify diff brothers.
The updated diff-files uses revision.c::setup_revisions()
infrastructure to parse its command line arguments, which means
the pathname arguments are checked more strictly than before.
The tests are adjusted to separate possibly missing paths from
the rest of arguments with double-dashes, to show the kosher
way.
As Linus pointed out, renaming diff.c to diff-lib.c was simply
stupid, so I am renaming it back. The new diff-lib.c is to
contain pieces extracted from diff brothers.
Junio C Hamano [Wed, 12 Apr 2006 06:05:14 +0000 (23:05 -0700)]
Add colordiff for git to contrib/colordiff.
I hacked it up to teach it the git extended diff headers, made
it not to read the whole patch in the array.
Also, the original program, when arguments are given, ran "diff"
with the given arguments and showed the output from it. Of
course, I changed it to run "git diff" ;-).
Split up builtin commands into separate files from git.c
Right now it split it into "builtin-log.c" for log-related commands
("log", "show" and "whatchanged"), and "builtin-help.c" for the
informational commands (usage printing and "help" and "version").
This just makes things easier to read, I find.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 21 Apr 2006 07:45:40 +0000 (00:45 -0700)]
Merge branch 'fix'
* fix:
fix pack-object buffer size
mailinfo: decode underscore used in "Q" encoding properly.
Reintroduce svn pools to solve the memory leak.
pack-objects: do not stop at object that is "too small"
Junio C Hamano [Fri, 21 Apr 2006 07:06:58 +0000 (00:06 -0700)]
mailinfo: decode underscore used in "Q" encoding properly.
Quoted-Printable (RFC 2045) and the "Q" encoding (RFC 2047) are
subtly different; the latter is used on the mail header and an
underscore needs to be decoded to 0x20.
Junio C Hamano [Fri, 21 Apr 2006 06:36:22 +0000 (23:36 -0700)]
pack-objects: do not stop at object that is "too small"
Because we sort the delta window by name-hash and then size,
hitting an object that is too small to consider as a delta base
for the current object does not mean we do not have better
candidate in the window beyond it.
Noticed by Shawn Pearce, analyzed by Nico, Linus and me.
Junio C Hamano [Thu, 20 Apr 2006 08:20:56 +0000 (01:20 -0700)]
git-commit --amend: two fixes.
When running "git commit --amend" only to fix the commit log
message without any content change, we mistakenly showed the
git-status output that says "nothing to commit" without
commenting it out.
If you have already run update-index but you want to amend the
top commit, "git commit --amend --only" without any paths should
have worked, because --only means "starting from the base
commit, update-index these paths only to prepare the index to
commit, and perform the commit". However, we refused -o without
paths.
Junio C Hamano [Thu, 20 Apr 2006 03:41:14 +0000 (20:41 -0700)]
diff --stat: do not drop rename information.
When a verbatim rename or copy is detected, we did not show
anything on the "diff --stat" for the filepair. This makes it
to show the rename information.
Junio C Hamano [Wed, 19 Apr 2006 19:51:29 +0000 (12:51 -0700)]
Add git-unresolve <paths>...
This is an attempt to address the issue raised on #git channel
recently by Carl Worth.
After a conflicted automerge, "git diff" shows a combined diff
to give you how the tentative automerge result differs from
what came from each branch. During a complex merge, it is
tempting to be able to resolve a few paths at a time, mark
them "I've dealt with them" with git-update-index to unclutter
the next "git diff" output, and keep going. However, when the
final result does not compile or otherwise found to be a
mismerge, the workflow to fix the mismerged paths suddenly
changes to "git diff HEAD -- path" (to get a diff from our
HEAD before merging) and "git diff MERGE_HEAD -- path" (to get
a diff from theirs), and it cannot show the combined anymore.
With git-unresolve <paths>..., the versions from our branch and
their branch for specified blobs are placed in stage #2 and
stage #3, without touching the working tree files. This gives
you the combined diff back for easier review, along with
"diff --ours" and "diff --theirs".
One thing it does not do is to place the base in stage #1; this
means "diff --base" would behave differently between the run
immediately after a conflicted three-way merge, and the run
after an update-index by mistake followed by a git-unresolve.
We could theoretically run merge-base between HEAD and
MERGE_HEAD to find which tree to place in stage #1, but
reviewing "diff --base" is not that useful so....
Junio C Hamano [Wed, 19 Apr 2006 22:57:45 +0000 (15:57 -0700)]
Merge branch 'lt/xsha1'
* lt/xsha1:
get_tree_entry(): make it available from tree-walk
sha1_name.c: no need to include diff.h; tree-walk.h will do.
sha1_name.c: prepare to make get_tree_entry() reusable from others.
get_sha1() shorthands for blob/tree objects
Junio C Hamano [Wed, 19 Apr 2006 21:58:24 +0000 (14:58 -0700)]
pre-commit hook: complain about conflict markers.
Several <<< or === or >>> characters at the beginning of a line
is very likely to be leftover conflict markers from a failed
automerge the user resolved incorrectly, so detect them.
As usual, this can be defeated with "git commit --no-verify" if
you really do want to have those files, just like changes that
introduce trailing whitespaces.
Junio C Hamano [Wed, 19 Apr 2006 21:54:27 +0000 (14:54 -0700)]
git-merge: a bit more readable user guidance.
We said "fix up by hand" after failed automerge, which was a big
"Huh? Now what?". Be a bit more explicit without being too
verbose. Suggested by Carl Worth.
I personally prefer "ignore_merges" to be on by default, because quite
often the merge diff is distracting and not interesting. That's true both
with "-p" and with "--stat" output.
If you want output from merges, you can trivially use the "-m", "-c" or
"--cc" flags to tell that you're interested in merges, which also tells
the diff generator what kind of diff to do (for --stat, any of the three
will do, of course, but they differ for plain patches or for
--patch-with-stat).
This trivial patch just removes the two lines that tells "git log" not to
ignore merges. It will still show the commit log message, of course, due
to the "always_show_header" part.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow "git repack" users to specify repacking window/depth
.. but don't even bother documenting it. I don't think any normal person
is supposed to ever really care, but it simplifies testing when you want
to use the "git repack" wrapper rather than forcing you to use the core
programs (which already do support the window/depth arguments, of course).
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a fairly straightforward patch to allow "get_sha1()" to also have
shorthands for tree and blob objects.
The syntax is very simple and intuitive: you can specify a tree or a blob
by simply specifying <revision>:<path>, and get_sha1() will do the SHA1
lookup from the tree for you.
You can currently do it with "git ls-tree <rev> <path>" and parsing the
output, but that's actually pretty awkward.
With this, you can do something like
git cat-file blob v1.2.4:Makefile
to get the contents of "Makefile" at revision v1.2.4.
Now, this isn't necessarily something you really need all that often, but
the concept itself is actually pretty powerful. We could, for example,
allow things like
to see the difference between two arbitrary files in two arbitrary
revisions. To do that, the only thing we'd have to do is to make
git-diff-tree accept two blobs to diff, in addition to the two trees it
now expects.
When I unified the revision argument parsing, I introduced a simple bug
wrt tags that had been marked uninteresting. When it was preparing for the
revision walk, it would mark all the parent commits of an uninteresting
tag correctly uninteresting, but it would forget about the commit itself.
This means that when I just did my 2.6.17-rc2 release, and my scripts
generated the log for "v2.6.17-rc1..v2.6.17-rc2", everything was fine,
except the commit pointed to by 2.6.17-rc1 (which shouldn't have been
there) was included. Even though it should obviously have been marked as
being uninteresting.
Not a huge deal, and the fix is trivial.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
The set_reuse_addr() error case was the only error case in
socklist() where we returned rather than continued. Not sure
why. Either we must free the socklist, or continue. This patch
continues on error.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 18 Apr 2006 20:56:36 +0000 (13:56 -0700)]
Merge branch 'lt/logopt'
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Fixes for option parsing
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
Junio C Hamano [Tue, 18 Apr 2006 05:53:03 +0000 (22:53 -0700)]
combine-diff: show diffstat with the first parent.
Asking for stat (either with --stat or --patch-with-stat) gives
you diffstat for the first parent, even under combine-diff.
While the combined patch is useful to highlight the complexity
and interaction of the parts touched by all branches when
reviewing a merge commit, diffstat is a tool to assess the
extent of damage the merge brings in, and showing stat with the
first parent is more sensible than clever per-parent diffstat.
This option is very special, since pretty_print_commit() will _remove_
the newline at the end of it, so we want to have an extra separator
between the things.
I added a honking big comment this time, so that (a) I don't forget this
_again_ (I broke "oneline" several times during this printout cleanup),
and so that people can understand _why_ the code does what it does.
Now, arguably the alternate fix is to always have the '\n' at the end in
pretty-print-commit, but git-rev-list depends on the current behaviour
(but we could have git-rev-list remove it, whatever).
With the big comment, the code hopefully doesn't get broken again. And now
things like
git log --pretty=oneline --cc --patch-with-stat
works (even if that is admittedly a totally insane combination: if you
want the patch, having the "oneline" log format is just crazy, but hey,
it _works_. Even insane people are people).
Here's a further patch on top of the previous one with cosmetic
improvements (no "real" code changes, just trivial updates):
- it gets the "---" before a diffstat right, including for the combined
merge case. Righ now the logic is that we always use "---" when we have
a diffstat, and an empty line otherwise. That's how I visually prefer
it, but hey, it can be tweaked later.
- I made "diff --cc/combined" add the "---/+++" header lines too. The
thing won't be mistaken for a valid diff, since the "@@" lines have too
many "@" characters (three or more), but it just makes it visually
match a real diff, which at least to me makes a big difference in
readability. Without them, it just looks very "wrong".
I guess I should have taken the filename from each individual entry
(and had one "---" file per parent), but I didn't even bother to try to
see how that works, so this was the simple thing.
With this, doing a
git log --cc --patch-with-stat
looks quite readable, I think. The only nagging issue - as far as I'm
concerned - is that diffstats for merges are pretty questionable the way
they are done now. I suspect it would be better to just have the _first_
diffstat, and always make the merge diffstat be the one for "result
against first parent".
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
The switch is inside an if statement which is false if
the character is ' '. Either the if should be <=' '
instead of <' ', or the case should be removed as it could
be misleading.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The strncmp for ACK was ACK does not include the final space.
Presumably either we should either remove the trailing space,
or compare 4 chars (as this patch does).
'path' is sometimes strdup'ed, but never freed.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 17 Apr 2006 01:12:49 +0000 (18:12 -0700)]
rev-list --boundary: show boundary commits even when limited otherwise.
The boundary commits are shown for UI like gitk to draw them as
soon as topo-order sorting allows, and should not be omitted by
get_revision() filtering logic. As long as their immediate
child commits are shown, we should not filter them out.
Paul Mackerras [Mon, 17 Apr 2006 00:27:59 +0000 (10:27 +1000)]
gitk: Fix bug caused by missing commitlisted elements
This bug was reported by Yann Dirson, and results in an 'Error:
expected boolean value but got ""' dialog when scrolling to the bottom
of the graph under some circumstances. The issue is that git-rev-list
isn't outputting all the boundary commits when it is asked for commits
affecting only certain files. We already cope with that by adding the
missing boundary commits in addextraid, but there we weren't adding a
0 to the end of the commitlisted list when we added the extra id to
the end of the displayorder list.
This fixes it by appending 0 to commitlisted in addextraid, thus keeping
commitlisted and displayorder in sync.
Junio C Hamano [Sun, 16 Apr 2006 09:31:11 +0000 (02:31 -0700)]
Merge branch 'master' into lt/logopt
* master:
pager: do not fork a pager if PAGER is set to empty.
diff-options: add --patch-with-stat
diff-files --stat: do not dump core with unmerged index.
Support "git cmd --help" syntax
diff --stat: do not do its own three-dashes.
diff-tree: typefix.
GIT v1.3.0-rc4
xdiff: post-process hunks to make them consistent.
This uses the "--no-walk" flag that I never actually implemented (but I'm
sure I mentioned it) to make "git show" be essentially the same thing as
"git whatchanged --no-walk".
It just refuses to add more interesting parents to the revision walking
history, so you don't actually get any history, you just get the commit
you asked for.
I was going to add "--no-walk" as a real argument flag to git-rev-list
too, but I'm not sure anybody actually needs it. Although it might be
useful for porcelain, so I left the door open.
[jc: ported to the unified option structure by Linus]
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 16 Apr 2006 06:46:36 +0000 (23:46 -0700)]
Split init_revisions() out of setup_revisions()
Merging all three option parsers related to whatchanged is
unarguably the right thing, but the fallout was too big to scare
me away. Let's try it once again, but once step at time.
This splits out init_revisions() call from setup_revisions(), so
that the callers can set different defaults to match the
traditional benaviour.
The rev-list command is still broken in a big way, which is the
topic of next step.
The "--help" argument is special, in that it is (along with "--version")
in that is taken by the "git" program itself rather than the sub-command,
and thus we've had the syntax "git --help cmd".
However, as anybody who has ever used CVS or some similar devil-spawn
program, it's confusing as h*ll when options before the sub-command act
differently from options after the sub-command, so this quick hack just
makes it acceptable to do "git cmd --help" instead, and get the exact same
result.
It may be hacky, but it's simple and does the trick.
Of course, this does not help if you use one of the non-builtin commands
without using the "git" helper. Ie you won't be getting a man-page just
because you do "git-rev-list --help". Don't expect us to be quite _that_
helpful.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
projects / git / log