Junio C Hamano [Mon, 7 Oct 2019 02:32:58 +0000 (11:32 +0900)]
Merge branch 'dl/cocci-everywhere'
Coccinelle checks are done on more source files than before now.
* dl/cocci-everywhere:
Makefile: run coccicheck on more source files
Makefile: strip leading ./ in $(FIND_SOURCE_FILES)
Makefile: define THIRD_PARTY_SOURCES
Makefile: strip leading ./ in $(LIB_H)
The "upload-pack" (the counterpart of "git fetch") needs to disable
commit-graph when responding to a shallow clone/fetch request, but
the way this was done made Git panic, which has been corrected.
* jk/disable-commit-graph-during-upload-pack:
upload-pack: disable commit graph more gently for shallow traversal
commit-graph: bump DIE_ON_LOAD check to actual load-time
"git log --decorate-refs-exclude=<pattern>" was incorrectly
overruled when the "--simplify-by-decoration" option is used, which
has been corrected.
* rs/simplify-by-deco-with-deco-refs-exclude:
log-tree: call load_ref_decorations() in get_name_decoration()
log: test --decorate-refs-exclude with --simplify-by-decoration
Junio C Hamano [Mon, 7 Oct 2019 02:32:54 +0000 (11:32 +0900)]
Merge branch 'jk/partial-clone-sparse-blob'
The name of the blob object that stores the filter specification
for sparse cloning/fetching was interpreted in a wrong place in the
code, causing Git to abort.
* jk/partial-clone-sparse-blob:
list-objects-filter: use empty string instead of NULL for sparse "base"
list-objects-filter: give a more specific error sparse parsing error
list-objects-filter: delay parsing of sparse oid
t5616: test cloning/fetching with sparse:oid=<oid> filter
Junio C Hamano [Sun, 6 Oct 2019 03:25:15 +0000 (12:25 +0900)]
Merge branch 'ma/asciidoctor-refmiscinfo'
Update support for Asciidoctor documentation toolchain.
* ma/asciidoctor-refmiscinfo:
doc-diff: replace --cut-header-footer with --cut-footer
asciidoctor-extensions: provide `<refmiscinfo/>`
Doc/Makefile: give mansource/-version/-manual attributes
"git rebase --autostash <upstream> <branch>", when <branch> is
different from the current branch, incorrectly moved the tip of the
current branch, which has been corrected.
* bw/rebase-autostash-keep-current-branch:
builtin/rebase.c: Remove pointless message
builtin/rebase.c: make sure the active branch isn't moved when autostashing
Junio C Hamano [Mon, 30 Sep 2019 04:19:31 +0000 (13:19 +0900)]
Merge branch 'ds/include-exclude'
The internal code originally invented for ".gitignore" processing
got reshuffled and renamed to make it less tied to "excluding" and
stress more that it is about "matching", as it has been reused for
things like sparse checkout specification that want to check if a
path is "included".
* ds/include-exclude:
unpack-trees: rename 'is_excluded_from_list()'
treewide: rename 'exclude' methods to 'pattern'
treewide: rename 'EXCL_FLAG_' to 'PATTERN_FLAG_'
treewide: rename 'struct exclude_list' to 'struct pattern_list'
treewide: rename 'struct exclude' to 'struct path_pattern'
Junio C Hamano [Mon, 30 Sep 2019 04:19:31 +0000 (13:19 +0900)]
Merge branch 'jh/trace2-pretty-output'
Output from trace2 subsystem is formatted more prettily now.
* jh/trace2-pretty-output:
trace2: cleanup whitespace in perf format
trace2: cleanup whitespace in normal format
quote: add sq_append_quote_argv_pretty()
trace2: trim trailing whitespace in normal format error message
trace2: remove dead code in maybe_add_string_va()
trace2: trim whitespace in region messages in perf target format
trace2: cleanup column alignment in perf target format
Junio C Hamano [Mon, 30 Sep 2019 04:19:31 +0000 (13:19 +0900)]
Merge branch 'dl/rebase-i-keep-base'
"git rebase --keep-base <upstream>" tries to find the original base
of the topic being rebased and rebase on top of that same base,
which is useful when running the "git rebase -i" (and its limited
variant "git rebase -x").
The command also has learned to fast-forward in more cases where it
can instead of replaying to recreate identical commits.
* dl/rebase-i-keep-base:
rebase: teach rebase --keep-base
rebase tests: test linear branch topology
rebase: fast-forward --fork-point in more cases
rebase: fast-forward --onto in more cases
rebase: refactor can_fast_forward into goto tower
t3432: test for --no-ff's interaction with fast-forward
t3432: distinguish "noop-same" v.s. "work-same" in "same head" tests
t3432: test rebase fast-forward behavior
t3431: add rebase --fork-point tests
The command line completion support (in contrib/) learned about the
"--skip" option of "git revert" and "git cherry-pick".
* dl/complete-cherry-pick-revert-skip:
status: mention --skip for revert and cherry-pick
completion: add --skip for cherry-pick and revert
completion: merge options for cherry-pick and revert
Junio C Hamano [Mon, 30 Sep 2019 04:19:30 +0000 (13:19 +0900)]
Merge branch 'jk/misc-uninitialized-fixes'
Various fixes to codepaths gcc 9 had trouble following dataflow.
* jk/misc-uninitialized-fixes:
pack-objects: drop packlist index_pos optimization
test-read-cache: drop namelen variable
diff-delta: set size out-parameter to 0 for NULL delta
bulk-checkin: zero-initialize hashfile_checkpoint
pack-objects: use object_id in packlist_alloc()
git-am: handle missing "author" when parsing commit
Junio C Hamano [Mon, 30 Sep 2019 04:19:29 +0000 (13:19 +0900)]
Merge branch 'en/filter-branch-deprecation'
Start discouraging the use of "git filter-branch".
* en/filter-branch-deprecation:
t9902: use a non-deprecated command for testing
Recommend git-filter-repo instead of git-filter-branch
t6006: simplify, fix, and optimize empty message test
Junio C Hamano [Mon, 30 Sep 2019 04:19:23 +0000 (13:19 +0900)]
Merge branch 'dl/format-patch-doc-test-cleanup'
The documentation and tests for "git format-patch" have been
cleaned up.
* dl/format-patch-doc-test-cleanup:
config/format.txt: specify default value of format.coverLetter
Doc: add more detail for git-format-patch
t4014: stop losing return codes of git commands
t4014: remove confusing pipe in check_threading()
t4014: use test_line_count() where possible
t4014: let sed open its own files
t4014: drop redirections to /dev/null
t4014: use indentable here-docs
t4014: remove spaces after redirect operators
t4014: use sq for test case names
t4014: move closing sq onto its own line
t4014: s/expected/expect/
t4014: drop unnecessary blank lines from test cases
Martin Ågren [Sun, 22 Sep 2019 11:57:59 +0000 (13:57 +0200)]
user-manual.txt: render ASCII art correctly under Asciidoctor
This commit is similar to 379805051d ("Documentation: render revisions
correctly under Asciidoctor", 2018-05-06) and is a no-op with AsciiDoc.
When creating a literal block from an indented block without any sort of
delimiters, Asciidoctor strips off all leading whitespace, resulting in
a misrendered ASCII drawing. Use an explicit literal block to indicate
to Asciidoctor that we want to keep the leading whitespace. Drop the
common indentation for all lines to make this a no-op with AsciiDoc.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sun, 22 Sep 2019 11:57:58 +0000 (13:57 +0200)]
asciidoctor-extensions.rb: handle "book" doctype in linkgit
user-manual.txt is the only file we process using the "book" doctype.
When we use AsciiDoc, user-manual.conf ensures that the linkgit macro
expands into something like
<ulink url="git-foo.html">git-foo(1)</ulink>
in user-manual.xml, which we then process into a clickable link, both in
user-manual.html and user-manual.pdf. With Asciidoctor,
user-manual.conf is ignored (this is expected) and our
Asciidoctor-specific implementation of linkgit kicks in:
This eventually renders as "git-foo(1)", which is not bad, but it
doesn't turn into a link.
Teach our Asciidoctor-specific implementation of the linkgit macro that
if the doctype is "book", we should emit <ulink .../> just like we do
with AsciiDoc. While we're doing this, future-proof by supporting a
"prefix". The implementation in user-manual.conf doesn't support this,
and we don't need this for now because user-manual.txt is the only file
we process this way (and it's immediately in Documentation/).
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sun, 22 Sep 2019 11:57:57 +0000 (13:57 +0200)]
user-manual.txt: change header notation
When AsciiDoc processes user-manual.txt, it generates a book containing
chapters containing sections. So for example, we have chapter 6,
"Advanced branch management", which contains four relatively short
sections, 6.1-6.4. Asciidoctor generates a book containing *parts*
containing *chapters* instead. So part 6, "Advanced branch management"
contains four short chapters, 1-4. This looks a bit odd.
To make AsciiDoc (8.6.10) and Asciidoctor (1.5.5) handle these the same,
change from indicating chapters like so:
[[foobar]]
Foobar
======
to doing it like so:
[[foobar]]
== Foobar
Same thing for sections (line of dashes to ===), subsections (line of
tildes to ====) and subsubsections (line of carets to =====). Mark the
appendices with "[appendix]", which both AsciiDoc and Asciidoctor
understand. This means we need to drop the "Appendix X: " from their
titles, or those "Appendix X: " would be included literally in the name
of the appendix.
This commit is a no-op for AsciiDoc: The generated user-manual.xml is
identical before and after this patch. Asciidoctor now creates the same
chapter-section-subsection structure as AsciiDoc.
Changing the book title at the start of the document to similarly use
"=" instead of a line of equal signs makes no difference with any of the
engines, but let's do that change anyway for consistency.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sun, 22 Sep 2019 11:57:56 +0000 (13:57 +0200)]
user-manual.txt: add missing section label
We provide a label for each chapter and section except for the "Pitfalls
with submodules" section. Since we're doing it everywhere else, let's do
it here, too.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the pull command instead of push is more accurate when giving
instructions on placing the psuh command in alphabetical order.
Signed-off-by: Pedro Sousa <pedroteosousa@gmail.com> Acked-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 21 Sep 2019 07:40:54 +0000 (09:40 +0200)]
travis-ci: do not skip successfully tested trees in debug mode
Travis CI offers shell access to its virtual machine environment
running the build jobs, called "debug mode" [1]. After restarting a
build job in debug mode and logging in, the first thing I usually do
is to install dependencies, i.e. run './ci/install-dependencies.sh'.
This works just fine when I restarted a failed build job in debug
mode. However, after restarting a successful build job in debug mode
our CI scripts get all clever, and exit without doing anything useful,
claiming that "This commit's tree has already been built and tested
successfully" [2]. Our CI scripts are right, and we do want to skip
building and testing already known good trees in "regular" CI builds.
In debug mode, however, this is a nuisiance, because one has to delete
the cache (or at least the 'good-trees' file in the cache) to proceed.
Let's update our CI scripts, in particular the common 'ci/lib.sh', to
not skip previously successfully built and tested trees in debug mode,
so all those scripts will do what there were supposed to do even when
a successful build job was restarted in debug mode.
[1] https://docs.travis-ci.com/user/running-build-in-debug-mode/
[2] 9cc2c76f5e (travis-ci: record and skip successfully built trees,
2017-12-31)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 20 Sep 2019 09:36:09 +0000 (11:36 +0200)]
t/helper: ignore only executable files
This patch conceptually reverts 44103f4197 (t/helper: ignore
everything but sources, 2017-12-12). Back in those days we did have a
lot of separate test helper executables under 't/helper', and its
'.gitignore' did get out of sync every once in a while.
Since then, however, most of those separate executables were
integrated into a single 'test-tool' command [1], and new test helpers
are added as new subcommands, so the chances of that '.gitignore'
getting out of sync again are much lower. And even if a contributor
were not careful enough and submits a patch that adds a new executable
under 't/helper' but forgets to update '.gitignore' accordingly, our
CI builds would catch it in a timely manner [2].
Ignoring everything but sources has the drawback that building an
older version of Git (e.g. during bisecting) creates all those
executables, and after going back to e.g. current 'master' the usual
cleanup commands like 'make clean' or 'git clean -fd' don't remove
them (the former doesn't know about them, and the latter doesn't
remove ignored files).
So let's ignore only the executable files under 't/helper/, i.e.
'test-tool' and the three other remaining executables that could not
be integrated into 'test-tool' (no need to ignore object files, as
they are already ignored by our toplevel '.gitignore').
[1] The topic starting with efd71f8913 (t/helper: add an empty
test-tool program, 2018-03-24), and leading up to the merge commit 27f25845cf (Merge branch 'nd/combined-test-helper', 2018-04-11).
[2] b92cb86ea1 (travis-ci: check that all build artifacts are
.gitignore-d, 2017-12-31)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 19 Sep 2019 20:48:30 +0000 (22:48 +0200)]
git: use COPY_ARRAY and MOVE_ARRAY in handle_alias()
Use the macro COPY_ARRAY to copy array elements and MOVE_ARRAY to do the
same for moving them backwards in an array with potential overlap. The
result is shorter and safer, as it infers the element type automatically
and does a (very) basic type compatibility check for its first two
arguments.
These cases were missed by Coccinelle and contrib/coccinelle/array.cocci
because the type of the elements is "const char *", not "char *", and
the rules in the semantic patch cautiously insist on the sizeof operator
being used on exactly the same type to avoid generating transformations
that introduce subtle bugs into tricky code.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Wed, 11 Sep 2019 18:20:27 +0000 (19:20 +0100)]
stash: make sure to write refreshed cache
When converting stash into C, calls to 'git update-index --refresh'
were replaced with the 'refresh_cache()' function. That is fine as
long as the index is only needed in-core, and not re-read from disk.
However in many cases we do actually need the refreshed index to be
written to disk, for example 'merge_recursive_generic()' discards the
in-core index before re-reading it from disk, and in the case of 'apply
--quiet', the 'refresh_cache()' we currently have is pointless without
writing the index to disk.
Always write the index after refreshing it to ensure there are no
regressions in this compared to the scripted stash. In the future we
can consider avoiding the write where possible after making sure none
of the subsequent calls actually need the refreshed cache, and it is
not expected to be refreshed after stash exits or it is written
somewhere else already.
Reported-by: Jeff King <peff@peff.net> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Wed, 11 Sep 2019 18:20:26 +0000 (19:20 +0100)]
merge: use refresh_and_write_cache
Use the 'refresh_and_write_cache()' convenience function introduced in
the last commit, instead of refreshing and writing the index manually
in merge.c
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Wed, 11 Sep 2019 18:20:25 +0000 (19:20 +0100)]
factor out refresh_and_write_cache function
Getting the lock for the index, refreshing it and then writing it is a
pattern that happens more than once throughout the codebase, and isn't
trivial to get right. Factor out the refresh_and_write_cache function
from builtin/am.c to read-cache.c, so it can be re-used in other
places in a subsequent commit.
Note that we return different error codes for failing to refresh the
cache, and failing to write the index. The current caller only cares
about failing to write the index. However for other callers we're
going to convert in subsequent patches we will need this distinction.
Helped-by: Martin Ågren <martin.agren@gmail.com> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Garima Singh [Mon, 26 Aug 2019 16:29:58 +0000 (09:29 -0700)]
commit-graph: add --[no-]progress to write and verify
Add --[no-]progress to git commit-graph write and verify.
The progress feature was introduced in 7b0f229
("commit-graph write: add progress output", 2018-09-17) but
the ability to opt-out was overlooked.
Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen P. Smith [Thu, 12 Sep 2019 04:11:02 +0000 (21:11 -0700)]
test_date.c: remove reference to GIT_TEST_DATE_NOW
Remove the reference to the GIT_TEST_DATE_NOW which is done in date.c.
We can't get rid of the "x" variable, since it serves as a generic
scratch variable for parsing later in the function.
Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 18 Sep 2019 18:50:09 +0000 (11:50 -0700)]
Merge branch 'md/list-objects-filter-combo'
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
Junio C Hamano [Wed, 18 Sep 2019 18:50:09 +0000 (11:50 -0700)]
Merge branch 'cc/multi-promisor'
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
Command line completion updates for "git -c var.name=val"
* sg/complete-configuration-variables:
completion: complete config variables and values for 'git clone --config='
completion: complete config variables names and values for 'git clone -c'
completion: complete values of configuration variables after 'git -c var='
completion: complete configuration sections and variable names for 'git -c'
completion: split _git_config()
completion: simplify inner 'case' pattern in __gitcomp()
completion: use 'sort -u' to deduplicate config variable names
completion: deduplicate configuration sections
completion: add tests for 'git config' completion
completion: complete more values of more 'color.*' configuration variables
completion: fix a typo in a comment
Junio C Hamano [Wed, 18 Sep 2019 18:50:07 +0000 (11:50 -0700)]
Merge branch 'jk/drop-release-pack-memory'
xmalloc() used to have a mechanism to ditch memory and address
space resources as the last resort upon seeing an allocation
failure from the underlying malloc(), which made the code complex
and thread-unsafe with dubious benefit, as major memory resource
users already do limit their uses with various other mechanisms.
It has been simplified away.
* jk/drop-release-pack-memory:
packfile: drop release_pack_memory()
Junio C Hamano [Wed, 18 Sep 2019 18:50:07 +0000 (11:50 -0700)]
Merge branch 'js/rebase-r-strategy'
"git rebase --rebase-merges" learned to drive different merge
strategies and pass strategy specific options to them.
* js/rebase-r-strategy:
t3427: accelerate this test by using fast-export and fast-import
rebase -r: do not (re-)generate root commits with `--root` *and* `--onto`
t3418: test `rebase -r` with merge strategies
t/lib-rebase: prepare for testing `git rebase --rebase-merges`
rebase -r: support merge strategies other than `recursive`
t3427: fix another incorrect assumption
t3427: accommodate for the `rebase --merge` backend having been replaced
t3427: fix erroneous assumption
t3427: condense the unnecessarily repetitive test cases into three
t3427: move the `filter-branch` invocation into the `setup` case
t3427: simplify the `setup` test case significantly
t3427: add a clarifying comment
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
René Scharfe [Wed, 18 Sep 2019 16:35:38 +0000 (18:35 +0200)]
sha1_name: simplify strbuf handling in interpret_nth_prior_checkout()
Pass the target strbuf to the callback function grab_nth_branch_switch()
by reference so that it can add the result string directly instead of
having it put the string into a temporary strbuf first. This gets rid
of an extra allocation and a string copy.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shebang for a python script should be "/usr/bin/env python" and not
"/usr/bin/python". On some OSes like AIX, python default path is not under
"/usr/bin" ("/opt/freeware/bin" for AIX).
Note the main reason behind this change is that AIX rpm will add a
dependency on "/usr/bin/python" instead of "/usr/bin/env".
Signed-off-by: Clément Chigot <clement.chigot@atos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / git / log