Introduce TLI predicative for base-relative Jump Tables.
For 64bit ABIs it is common practice to use relative Jump Tables with
potentially different relocation bases. As the logic for the jump table
itself doesn't depend on the relocation base, make it easier for targets
to use the generic logic. Start by dropping the now redundant MIPS logic.
Daniel Sanders [Tue, 15 Nov 2016 09:51:02 +0000 (09:51 +0000)]
[tablegen] Extract portions of AsmMatcherEmitter for re-use by another generator. NFC.
Summary:
This change is preparation for a change that will allow targets to verify that the instructions
they emit meet the predicates they specify. This is useful to ensure that C++
legalization/lowering/instruction-selection doesn't incorrectly select code for a different
subtarget than intended. Such cases are not caught by the integrated assembler when emitting
instructions directly to an object file.
Adam Nemet [Tue, 15 Nov 2016 08:40:51 +0000 (08:40 +0000)]
[opt-viewer] Add support for libYAML for faster parsing
This results in a speed-up of over 6x on sqlite3.
Before:
$ time -p /org/llvm/utils/opt-viewer/opt-viewer.py ./MultiSource/Applications/sqlite3/CMakeFiles/sqlite3.dir/sqlite3.c.opt.yaml html
real 415.07
user 410.00
sys 4.66
After with libYAML:
$ time -p /org/llvm/utils/opt-viewer/opt-viewer.py ./MultiSource/Applications/sqlite3/CMakeFiles/sqlite3.dir/sqlite3.c.opt.yaml html
real 63.96
user 60.03
sys 3.67
I followed these steps to get libYAML working with PyYAML: http://rmcgibbo.github.io/blog/2013/05/23/faster-yaml-parsing-with-libyaml/
Zvi Rackover [Tue, 15 Nov 2016 06:34:33 +0000 (06:34 +0000)]
[X86][GlobalISel] Add minimal call lowering support to the IRTranslator
Summary:
Add basic functionality to support call lowering for X86.
Currently only supports functions which return void and take zero arguments.
Inspired by commit 286573.
Greg Clayton [Tue, 15 Nov 2016 01:23:06 +0000 (01:23 +0000)]
Improve DWARF parsing speed by improving DWARFAbbreviationDeclaration
This patch gets a DWARF parsing speed improvement by having DWARFAbbreviationDeclaration instances know if they have a fixed byte size. If an abbreviation has a fixed byte size that can be calculated given a DWARFUnit, then parsing a DIE becomes two steps: parse ULEB128 abbrev code, and then add constant size to the offset.
This patch also adds a fixed byte size to each DWARFAbbreviationDeclaration::AttributeSpec so that attributes can quickly skip their values if needed without the need to lookup the fixed for size.
Notable improvements:
- DWARFAbbreviationDeclaration::findAttributeIndex() now returns an Optional<uint32_t> instead of a uint32_t and we no longer have to look for the magic -1U return value
- Optional<uint32_t> DWARFAbbreviationDeclaration::findAttributeIndex(dwarf::Attribute attr) const;
- DWARFAbbreviationDeclaration now has a getAttributeValue() function that extracts an attribute value given a DIE offset that takes advantage of the DWARFAbbreviationDeclaration::AttributeSpec::ByteSize
- bool DWARFAbbreviationDeclaration::getAttributeValue(const uint32_t DIEOffset, const dwarf::Attribute Attr, const DWARFUnit &U, DWARFFormValue &FormValue) const;
- A DWARFAbbreviationDeclaration instance can return a fixed byte size for itself so DWARF parsing is faster:
- Optional<size_t> DWARFAbbreviationDeclaration::getFixedAttributesByteSize(const DWARFUnit &U) const;
- Any functions that used to take a "const DWARFUnit *U" that would crash if U was NULL now take a "const DWARFUnit &U" and are only called with a valid DWARFUnit
Rui Ueyama [Tue, 15 Nov 2016 00:54:54 +0000 (00:54 +0000)]
Add a file magic for CL.exe's object file created with /GL.
This patch makes it possible to identify object files created by CL.exe
with /GL option. Such file contains Microsoft proprietary intermediate
code instead of target machine code to do LTO.
I need this to print out user-friendly error message from LLD.
Permit specifying the match length (the `-n` or `--bytes` option). The
deprecated `-[length]` form is not supported as an option. This allows the
strings tool to display only the specified length strings rather than the
hardcoded default length of >= 4.
Evandro Menezes [Mon, 14 Nov 2016 23:29:01 +0000 (23:29 +0000)]
[AArch64] Compute the Newton series for reciprocals natively
Implement the Newton series for square root, its reciprocal and reciprocal
natively using the specialized instructions in AArch64 to perform each
series iteration.
Kuba Brecka [Mon, 14 Nov 2016 21:41:13 +0000 (21:41 +0000)]
[tsan] Add support for C++ exceptions into TSan (call __tsan_func_exit during unwinding), LLVM part
This adds support for TSan C++ exception handling, where we need to add extra calls to __tsan_func_exit when a function is exitted via exception mechanisms. Otherwise the shadow stack gets corrupted (leaked). This patch moves and enhances the existing implementation of EscapeEnumerator that finds all possible function exit points, and adds extra EH cleanup blocks where needed.
Kevin Enderby [Mon, 14 Nov 2016 20:57:04 +0000 (20:57 +0000)]
Add a checkSymbolTable() method to the MachOObjectFile class.
The philosophy of the error checking in libObject for Mach-O files
is that the constructor will check the load commands so for their
tables the offsets and sizes are properly contained in the file.
But there is no checking of the entries of any of the tables.
For the contents of the tables themselves the methods accessing
the contents of the entries return errors as needed. In some
cases this however makes it difficult or cumbersome to produce
a good error message which would include the tool name, file name,
archive member, and name of the architecture of a slice of a universal file
the error occurred in.
So idea is that there will be a method to check a table which can
be called up front before using it allowing a good error message
to be produced before a table is used. And if only verification of
the Mach-O file and its tables are wanted a new possible method
checkAllTables() could be added to call all of the methods to
check all the tables at some time when such methods exist.
The checkSymbolTable() is the first of such methods to check
one of the Mach-O file tables. This method initially will used in
llvm-objdump’s DisassembleMachO() routine before it gets the
section and symbol information. As if there are problems with
the symbol table currently the error is first encountered by the
bool operator() in the SymbolSorter() struct which passed to
std::sort(). In this case there is no context as to the file name
the symbol which results a poor error message:
LLVM ERROR: truncated or malformed object (bad string index: 22 for symbol at index 1)
with the added call to the checkSymbolTable() method the
error message includes the tool name and file name:
llvm-objdump: 'macho-invalid-symbol-strx': truncated or malformed object (bad string table index: 22 past the end of string table, for symbol at index 1)
Tim Northover [Mon, 14 Nov 2016 20:28:24 +0000 (20:28 +0000)]
Recommit: ARM: sort register lists by encoding in push/pop instructions.
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
Fixed usage of std::sort so that we (hopefully) use instantiations that
actually exist in GCC 4.8.
Geoff Berry [Mon, 14 Nov 2016 19:39:04 +0000 (19:39 +0000)]
[AArch64] Split 0 vector stores into scalar store pairs.
Summary:
Replace a splat of zeros to a vector store by scalar stores of WZR/XZR.
The load store optimizer pass will merge them to store pair stores.
This should be better than a movi to create the vector zero followed by
a vector store if the zero constant is not re-used, since one
instructions and one register live range will be removed.
Teresa Johnson [Mon, 14 Nov 2016 19:21:41 +0000 (19:21 +0000)]
[ThinLTO] Only promote exported locals as marked in index
Summary:
We have always speculatively promoted all renamable local values
(except const non-address taken variables) for both the exporting
and importing module. We would then internalize them back based on
the ThinLink results if they weren't actually exported. This is
inefficient, and results in unnecessary renames. It also meant we
had to check the non-renamability of a value in the summary, which
was already checked during function importing analysis in the ThinLink.
Made renameModuleForThinLTO (which does the promotion/renaming) instead
use the index when exporting, to avoid unnecessary renames/promotions.
For importing modules, we can simply promoted all values as any local
we import by definition is exported and needs promotion.
This required changes to the method used by the FunctionImport pass
(only invoked from 'opt' for testing) and when invoked from llvm-link,
since neither does a ThinLink. We simply conservatively mark all locals
in the index as promoted, which preserves the current aggressive
promotion behavior.
I also needed to change an llvm-lto based test where we had previously
been aggressively promoting values that weren't importable (aliasees),
but now will not promote.
Tim Northover [Mon, 14 Nov 2016 19:02:17 +0000 (19:02 +0000)]
ARM: sort register lists by encoding in push/pop instructions.
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
Changpeng Fang [Mon, 14 Nov 2016 18:33:18 +0000 (18:33 +0000)]
AMDGPU/SI: Support data types other than V4f32 in image intrinsics
Summary:
Extend image intrinsics to support data types of V1F32 and V2F32.
TODO: we should define a mapping table to change the opcode for data type of V2F32 but just one channel is active,
even though such case should be very rare.
Bob Wilson [Mon, 14 Nov 2016 17:56:18 +0000 (17:56 +0000)]
Use _Unwind_Backtrace on Apple platforms.
Darwin's backtrace() function does not work with sigaltstack (which was
enabled when available with r270395) — it does a sanity check to make
sure that the current frame pointer is within the expected stack area
(which it is not when using an alternate stack) and gives up otherwise.
The alternative of _Unwind_Backtrace seems to work fine on macOS, so use
that when backtrace() fails. Note that we then use backtrace_symbols_fd()
with the addresses from _Unwind_Backtrace, but I’ve tested that and it
also seems to work fine. rdar://problem/28646552
Teresa Johnson [Mon, 14 Nov 2016 17:12:32 +0000 (17:12 +0000)]
Restore "[ThinLTO] Prevent exporting of locals used/defined in module level asm"
This restores the rest of r286297 (part was restored in r286475).
Specifically, it restores the part requiring adding a dependency from
the Analysis to Object library (downstream use changed to correctly
model split BitReader vs BitWriter libraries).
Original description of this part of patch follows:
Module level asm may also contain defs of values. We need to prevent
export of any refs to local values defined in module level asm (e.g. a
ref in normal IR), since that also requires renaming/promotion of the
local. To do that, the summary index builder looks at all values in the
module level asm string that are not marked Weak or Global, which is
exactly the set of locals that are defined. A summary is created for
each of these local defs and flagged as NoRename.
This required adding handling to the BitcodeWriter to look at GV
declarations to see if they have a summary (rather than skipping them
all).
Finally, added an assert to IRObjectFile::CollectAsmUndefinedRefs to
ensure that an MCAsmParser is available, otherwise the module asm parse
would silently fail. Initialized the asm parser in the opt tool for use
in testing this fix.
[Hexagon] Remove unsafe load instructions that affect Stack Slot Coloring
The Stack slot coloring pass removes a store that is followed by a load
that deal with the same stack slot. The function isLoadFromStackSlot
is supposed to consider the loads that have no side-effects. This
patch fixed the issue by removing the unsafe loads from this function
Eg:
%vreg0<def> = L2_loadruh_io <fi#15>, 0
S2_storeri_io <fi#15>, 0, %vreg0
In this case, we load an unsigned extended half word and store this in to
the same stack slot. The Stack slot coloring pass considers safe to remove
the store. This patch marked all the non-vector byte and half word loads as
unsafe.
Stephan Bergmann [Mon, 14 Nov 2016 17:07:09 +0000 (17:07 +0000)]
Handle non-inlined clang::Type::getAs specializations in extract_symbols.py
The existing logic was to discard any symbols representing function template
instantiations, as the definitions were assumed to be inline. But there are
three explicit specializations of clang::Type::getAs that are only defined in
Clang's lib/AST/Type.cpp, and at least the plugin used by the LibreOffice build
(https://wiki.documentfoundation.org/Development/Clang_plugins) uses those
functions.
Teresa Johnson [Mon, 14 Nov 2016 16:40:19 +0000 (16:40 +0000)]
[ThinLTO] Make inline assembly handling more efficient in summary
Summary:
The change in r285513 to prevent exporting of locals used in
inline asm added all locals in the llvm.used set to the reference
set of functions containing inline asm. Since these locals were marked
NoRename, this automatically prevented importing of the function.
Unfortunately, this caused an explosion in the summary reference lists
in some cases. In my particular example, it happened for a large protocol
buffer generated C++ file, where many of the generated functions
contained an inline asm call. It was exacerbated when doing a ThinLTO
PGO instrumentation build, where the PGO instrumentation included
thousands of private __profd_* values that were added to llvm.used.
We really only need to include a single llvm.used local (NoRename) value
in the reference list of a function containing inline asm to block it
being imported. However, it seems cleaner to add a flag to the summary
that explicitly describes this situation, which is what this patch does.
Aaron Ballman [Mon, 14 Nov 2016 13:33:51 +0000 (13:33 +0000)]
Reverting r285406, which was a temporary workaround to get one of the documentation bots upgraded to something newer than GCC 4.7. This restores the check for GCC 4.8.
James Molloy [Mon, 14 Nov 2016 11:14:41 +0000 (11:14 +0000)]
[InlineCost] Remove skew when calculating call costs
When calculating the cost of a call instruction we were applying a heuristic penalty as well as the cost of the instruction itself.
However, when calculating the benefit from inlining we weren't discounting the equivalent penalty for the call instruction that would be removed! This caused skew in the calculation and meant we wouldn't inline in the following, trivial case:
Pablo Barrio [Mon, 14 Nov 2016 10:24:26 +0000 (10:24 +0000)]
[JumpThreading] Prevent non-deterministic use lists
Summary:
Unfolding selects was previously done with the help of a vector
of pointers that was then sorted to be able to remove duplicates.
As this sorting depends on the memory addresses, it was
non-deterministic. A SetVector is used now so that duplicates are
removed without the need of sorting first.
Eric Fiselier [Mon, 14 Nov 2016 07:26:17 +0000 (07:26 +0000)]
Add explicit (void) cast to unused unique_ptr::release() results
Summary:
This patch adds explicit `(void)` casts to discarded `release()` calls to suppress -Wunused-result.
This patch fixes *all* warnings are generated as a result of [applying `[[nodiscard]]` within libc++](https://reviews.llvm.org/D26596).
Similar fixes were applied to Clang in r286796.
Only attempt to demangle symbols which have the itanium C++ prefix of `_Z`.
This ensures that we do not treat any symbol name as a managled named. We would
previously treat a C function `f` as a mangled name and decode that to `float`
incorrectly.
While it is easy to add tests for this, Mehdi recommended against introducing
tests for the demangler as libc++abi should cover the testing.
Craig Topper [Mon, 14 Nov 2016 01:53:29 +0000 (01:53 +0000)]
[X86] Cleanup 'x' and 'y' mnemonic suffixes for vcvtpd2dq/vcvttpd2dq/vcvtpd2ps and similar instructions.
-Don't print the 'x' suffix for the 128-bit reg/mem VEX encoded instructions in Intel syntax. This is consistent with the EVEX versions.
-Don't print the 'y' suffix for the 256-bit reg/reg VEX encoded instructions in Intel or AT&T syntax. This is consistent with the EVEX versions.
-Allow the 'x' and 'y' suffixes to be used for the reg/mem forms when we're assembling using Intel syntax.
-Allow the 'x' and 'y' suffixes on the reg/reg EVEX encoded instructions in Intel or AT&T syntax. This is consistent with what VEX was already allowing.
Sanjoy Das [Sun, 13 Nov 2016 23:40:40 +0000 (23:40 +0000)]
[LangRef] Drop misleading anecdote
`shl nsw i8 1, i8 8` is poison, but `mul i8 1, i8 128` is not.
This was discussed previously here:
http://lists.llvm.org/pipermail/llvm-dev/2015-April/084195.html. From
the discussion, it was not clear which semantics we want for `shl`, but
for now at least make the language reference more accurate.
`c++filt` when given no arguments runs as a REPL, decoding each line as a
decorated name. Unify the test structure to be more uniform, with the tests for
llvm-cxxfilt living under test/tools/llvm-cxxfilt.
Sanjay Patel [Sun, 13 Nov 2016 20:04:52 +0000 (20:04 +0000)]
[ValueTracking] recognize even more variants of smin/smax
Similar to:
https://reviews.llvm.org/rL285499
https://reviews.llvm.org/rL286318
We can't minimally expose this in IR tests because we don't have min/max intrinsics,
but the difference is visible in codegen because SelectionDAGBuilder::visitSelect()
uses matchSelectPattern().
We're not canonicalizing these patterns in IR (yet), so I don't expect there to be any
regressions as noted here:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/106868.html
Matt Arsenault [Sun, 13 Nov 2016 18:20:54 +0000 (18:20 +0000)]
AMDGPU: Implement SGPR spilling with scalar stores
nThis avoids the nasty problems caused by using
memory instructions that read the exec mask while
spilling / restoring registers used for control flow
masking, but only for VI when these were added.
This always uses the scalar stores when enabled currently,
but it may be better to still try to spill to a VGPR
and use this on the fallback memory path.
The cache also needs to be flushed before wave termination
if a scalar store is used.
Analysis: Simplify the ScalarEvolution::getGEPExpr() interface. NFCI.
All existing callers were manually extracting information out of an existing
GEP instruction and passing it to getGEPExpr(). Simplify the interface by
changing it to take a GEPOperator instead.
projects / llvm / log