Ensure to clear the session object in case the libssh2 initialization
fails.
It could be argued that the libssh2 error function should be called to
get a proper error message in this case. But since the only error path
in libssh2_knownhost_init() is memory a allocation failure it's safest
to avoid since the libssh2 error handling allocates memory.
Closes #3179 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Gisle Vanem [Mon, 22 Oct 2018 08:33:44 +0000 (10:33 +0200)]
rtmp: fix for compiling with lwIP
Compiling on _WIN32 and with USE_LWIPSOCK, causes this error:
curl_rtmp.c(223,3): error: use of undeclared identifier 'setsockopt'
setsockopt(r->m_sb.sb_socket, SOL_SOCKET, SO_RCVTIMEO,
^
curl_rtmp.c(41,32): note: expanded from macro 'setsockopt'
#define setsockopt(a,b,c,d,e) (setsockopt)(a,b,c,(const char *)d,(int)e)
^
Closes #3155
Michael Kaufmann [Wed, 10 Oct 2018 20:38:50 +0000 (22:38 +0200)]
netrc: free temporary strings if memory allocation fails
- Change the inout parameters after all needed memory has been
allocated. Do not change them if something goes wrong.
- Free the allocated temporary strings if strdup() fails.
Most headerfiles end with a /* <headerguard> */ comment, but it was
missing from some. The comment isn't the most important part of our
code documentation but consistency has an intrinsic value in itself.
This adds header guard comments to the files that were lacking it.
Closes #3158 Reviewed-by: Jay Satiro <raysatiro@yahoo.com> Reviewed-by: Daniel Stenberg <daniel@haxx.se>
For IP addresses in the subject alternative name field, the length
of the IP address (and hence the number of bytes to perform a
memcmp on) is incorrectly calculated to be zero. The code previously
subtracted q from name.end. where in a successful case q = name.end
and therefore addrlen equalled 0. The change modifies the code to
subtract name.beg from name.end to calculate the length correctly.
The issue only affects libcurl with GSKit SSL, not other SSL backends.
The issue is not a security issue as IP verification would always fail.
Commit 57348eb97d1b8fc3742e02c6587d2d02ff592da5 added support for the
MesaLink vtls backend, but missed updating the TLS section containing
supported backends in the docs.
Closes #3134 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Viktor Szakats [Fri, 12 Oct 2018 21:04:37 +0000 (21:04 +0000)]
replace rawgit links [ci skip]
Ref: https://rawgit.com/ "RawGit has reached the end of its useful life"
Ref: https://news.ycombinator.com/item?id=18202481
Closes https://github.com/curl/curl/pull/3131
Daniel Stenberg [Thu, 4 Oct 2018 21:53:32 +0000 (23:53 +0200)]
FILE: fix CURLOPT_NOBODY and CURLOPT_HEADER output
Now FILE transfers send headers to the header callback like HTTP and
other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...)
work for FILE in the callbacks.
Makes "curl -i file://.." and "curl -I file://.." work like before
again. Applied the bold header logic to them too.
In case a very small buffer was passed to the version function, it could
result in the buffer not being NULL-terminated since strncpy() doesn't
guarantee a terminator on an overflowed buffer. Rather than adding code
to terminate (and handle zero-sized buffers), move to using snprintf()
instead like all the other vtls backends.
Closes #3105 Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Viktor Szakats <commit@vszakats.net>
Marcel Raad [Fri, 5 Oct 2018 11:02:34 +0000 (13:02 +0200)]
AppVeyor: add remaining Visual Studio versions
This adds Visual Studio 9 and 10 builds.
There's no 64-bit VC9 compiler on AppVeyor, so use it as the Win32
build. Also, VC9 cannot be used for running the test suite.
Daniel Stenberg [Sat, 6 Oct 2018 11:31:33 +0000 (13:31 +0200)]
test2100: test DoH using IPv4-only
To make it only send one DoH request and avoid the race condition that
could lead to the requests getting sent in reversed order and thus
making it hard to compare in the test case.
The parameter reference <string> was causing rendering issues in the
generated HTML page, as <string> isn't a valid HTML tag. Fix by back-
tick escaping it.
Closes #3099 Reviewed-by: Jay Satiro <raysatiro@yahoo.com> Reviewed-by: Daniel Stenberg <daniel@haxx.se>
If a !checksrc! disable command specified to ignore zero errors, it was
still added to the ignore block even though nothing was ignored. While
there were no blocks ignored that shouldn't be ignored, the processing
ended with with a warning:
<filename>:<line>:<col>: warning: Unused ignore: LONGLINE (UNUSEDIGNORE)
/* !checksrc! disable LONGLINE 0 */
^
Fix by instead treating a zero ignore as a a badcommand and throw a
warning for that one.
Closes #3096 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Enable strict and warnings mode for checksrc to ensure we aren't missing
anything due to bugs in the checking code. This uncovered a few things
which are all fixed in this commit:
* several variables were used uninitialized
* several variables were not defined in the correct scope
* the whitelist filehandle was read even if the file didn't exist
* the enable_warn() call when a disable counter had expired was passing
incorrect variables, but since the checkwarn() call is unlikely to hit
(the counter is only decremented to zero on actual ignores) it didn't
manifest a problem.
Closes #3090 Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The result of a memory allocation should always be checked, as we may
run under memory pressure where even a small allocation can fail. This
adds checking and error handling to a few cases where the allocation
wasn't checked for success. In the ftp case, the freeing of the path
variable is moved ahead of the allocation since there is little point
in keeping it around across the strdup, and the separation makes for
more readable code. In nwlib, the lock is aslo freed in the error path.
Also bumps the copyright years on affected files.
Closes #3084 Reviewed-by: Jay Satiro <raysatiro@yahoo.com> Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Use proper Markdown hyperlink format for the Bountygraph links in order
for the generated website page to be more user friendly. Also link to
the sponsors to give them a little extra credit.
Closes #3082 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Jay Satiro [Wed, 3 Oct 2018 01:55:57 +0000 (21:55 -0400)]
data-binary.d: clarify default content-type is x-www-form-urlencoded
- Advise user that --data-binary sends a default content type of
x-www-form-urlencoded, and to have the data treated as arbitrary
binary data by the server set the content-type header to octet-stream.
Daniel Stenberg [Tue, 2 Oct 2018 07:08:56 +0000 (09:08 +0200)]
runtests: ignore disabled even when ranges are given
runtests.pl support running a range of tests, like "44 to 127". Starting
now, the code makes sure that even such given ranges will ignore tests
that are marked as disabled.
Disabled tests can still be run by explictly specifying that test
number.
Ruslan Baratov [Tue, 17 Jul 2018 23:31:51 +0000 (02:31 +0300)]
CMake: Improve config installation
Use 'GNUInstallDirs' standard module to set destinations of installed
files.
Use uppercase "CURL" names instead of lowercase "curl" to match standard
'FindCURL.cmake' CMake module:
* https://cmake.org/cmake/help/latest/module/FindCURL.html
Meaning:
* Install 'CURLConfig.cmake' instead of 'curl-config.cmake'
* User should call 'find_package(CURL)' instead of 'find_package(curl)'
Use 'configure_package_config_file' function to generate
'CURLConfig.cmake' file. This will make 'curl-config.cmake.in' template
file smaller and handle components better. E.g. current configuration
report no error if user specified unknown components (note: new
configuration expects no components, report error if user will try to
specify any).
projects / curl / log