Bruce Momjian [Wed, 31 Jan 2018 21:43:32 +0000 (16:43 -0500)]
doc: Improve pg_upgrade rsync examples to use clusterdir
Commit 9521ce4a7a1125385fb4de9689f345db594c516a from Sep 13, 2017 and
backpatched through 9.5 used rsync examples with datadir. The reporter
has pointed out, and testing has verified, that clusterdir must be used,
so update the docs accordingly.
Reported-by: Don Seiler
Discussion: https://postgr.es/m/CAHJZqBD0u9dCERpYzK6BkRv=663AmH==DFJpVC=M4Xg_rq2=CQ@mail.gmail.com
Bruce Momjian [Wed, 31 Jan 2018 21:25:21 +0000 (16:25 -0500)]
doc: mention datadir locations are actually config locations
Technically, pg_upgrade's --old-datadir and --new-datadir are
configuration directories, not necessarily data directories. This is
reflected in the 'postgres' manual page, so do the same for pg_upgrade.
Robert Haas [Wed, 31 Jan 2018 20:43:11 +0000 (15:43 -0500)]
Fix list partition constraints for partition keys of array type.
The old code generated always generated a constraint of the form
col = ANY(ARRAY[val1, val2, ...]), but that's invalid when col is an
array type. Instead, generate col = val when there's only one value,
col = val1 OR col = val2 OR ... when there are multiple values and
col is of array type, and the old form when there are multiple values
and col is not of an array type.
As a side benefit, this makes constraint exclusion able to prune
a list partition declared to accept a single Boolean value, which
didn't work before.
Robert Haas [Tue, 30 Jan 2018 19:27:38 +0000 (14:27 -0500)]
Fix test case for 'outer pathkeys do not match mergeclauses' fix.
Commit 4bbf6edfbd5d03743ff82dda2f00c738fb3208f5 added a test case,
but it turns out that the test case doesn't reliably test for the
bug, and in the context of the regression test suite did not because
ANALYZE had not been run.
Report and patch by Etsuro Fujita. I added a comment along lines
previously suggested by Tom Lane.
Andres Freund [Mon, 29 Jan 2018 19:02:09 +0000 (11:02 -0800)]
Prevent growth of simplehash tables when they're "too empty".
In cases where simplehash tables where filled with either a lot of
conflicting hash-values, or values that hash to consecutive
values (i.e. build "chains") the growth heuristics in d4c62a6b623d6eef88218158e9fa3cf974c6c7e5 could trigger rather
explosively.
To fix that, address some of the reasons (see previous commit) of why
the growth heuristics where needed, and only allow growth when the
table isn't too empty. While that means there's a few cases of bad
input that can be slower, that seems a lot better than running very
quickly out of memory.
Author: Tomas Vondra and Andres Freund, with additional input by
Thomas Munro, Tom Lane Todd A. Cook Reported-By: Todd A. Cook, Tomas Vondra, Thomas Munro
Discussion: https://postgr.es/m/20171127185700.1470.20362@wrigleys.postgresql.org
Backpatch: 10, where simplehash was introduced
Andres Freund [Mon, 29 Jan 2018 19:02:09 +0000 (11:02 -0800)]
Improve bit perturbation in TupleHashTableHash.
The changes in b81b5a96f424531b97cdd1dba97d9d1b9c9d372e did not fully
address the issue, because the bit-mixing of the IV into the final
hash-key didn't prevent clustering in the input-data survive in the
output data.
This didn't cause a lot of problems because of the additional growth
conditions added d4c62a6b623d6eef88218158e9fa3cf974c6c7e5. But as we
want to rein those in due to explosive growth in some edges, this
needs to be fixed.
Author: Andres Freund
Discussion: https://postgr.es/m/20171127185700.1470.20362@wrigleys.postgresql.org
Backpatch: 10, where simplehash was introduced
Tom Lane [Sun, 28 Jan 2018 18:39:07 +0000 (13:39 -0500)]
Add stack-overflow guards in set-operation planning.
create_plan_recurse lacked any stack depth check. This is not per
our normal coding rules, but I'd supposed it was safe because earlier
planner processing is more complex and presumably should eat more
stack. But bug #15033 from Andrew Grossman shows this isn't true,
at least not for queries having the form of a many-thousand-way
INTERSECT stack.
Further testing showed that recurse_set_operations is also capable
of being crashed in this way, since it likewise will recurse to the
bottom of a parsetree before calling any support functions that
might themselves contain any stack checks. However, its stack
consumption is only perhaps a third of create_plan_recurse's.
It's possible that this particular problem with create_plan_recurse can
only manifest in 9.6 and later, since before that we didn't build a Path
tree for set operations. But having seen this example, I now have no
faith in the proposition that create_plan_recurse doesn't need a stack
check, so back-patch to all supported branches.
Tom Lane [Sat, 27 Jan 2018 21:42:28 +0000 (16:42 -0500)]
Update time zone data files to tzdata release 2018c.
DST law changes in Brazil, Sao Tome and Principe. Historical corrections
for Bolivia, Japan, and South Sudan. The "US/Pacific-New" zone has been
removed (it was only a link to America/Los_Angeles anyway).
Tom Lane [Sat, 27 Jan 2018 18:52:24 +0000 (13:52 -0500)]
Avoid crash during EvalPlanQual recheck of an inner indexscan.
Commit 09529a70b changed nodeIndexscan.c and nodeIndexonlyscan.c to
postpone initialization of the indexscan proper until the first tuple
fetch. It overlooked the question of mark/restore behavior, which means
that if some caller attempts to mark the scan before the first tuple fetch,
you get a null pointer dereference.
The only existing user of mark/restore is nodeMergejoin.c, which (somewhat
accidentally) will never attempt to set a mark before the first inner tuple
unless the inner child node is a Material node. Hence the case can't arise
normally, so it seems sufficient to document the assumption at both ends.
However, during an EvalPlanQual recheck, ExecScanFetch doesn't call
IndexNext but just returns the jammed-in test tuple. Therefore, if we're
doing a recheck in a plan tree with a mergejoin with inner indexscan,
it's possible to reach ExecIndexMarkPos with iss_ScanDesc still null,
as reported by Guo Xiang Tan in bug #15032.
Really, when there's a test tuple supplied during an EPQ recheck, touching
the index at all is the wrong thing: rather, the behavior of mark/restore
ought to amount to saving and restoring the es_epqScanDone flag. We can
avoid finding a place to actually save the flag, for the moment, because
given the assumption that no caller will set a mark before fetching a
tuple, es_epqScanDone must always be set by the time we try to mark.
So the actual behavior change required is just to not reach the index
access if a test tuple is supplied.
The set of plan node types that need to consider this issue are those
that support EPQ test tuples (i.e., call ExecScan()) and also support
mark/restore; which is to say, IndexScan, IndexOnlyScan, and perhaps
CustomScan. It's tempting to try to fix the problem in one place by
teaching ExecMarkPos() itself about EPQ; but ExecMarkPos supports some
plan types that aren't Scans, and also it seems risky to make assumptions
about what a CustomScan wants to do here. Also, the most likely future
change here is to decide that we do need to support marks placed before
the first tuple, which would require additional work in IndexScan and
IndexOnlyScan in any case. Hence, fix the EPQ issue in nodeIndexscan.c
and nodeIndexonlyscan.c, accepting the small amount of code duplicated
thereby, and leave it to CustomScan providers to fix this bug if they
have it.
Back-patch to v10 where commit 09529a70b came in. In earlier branches,
the index_markpos() call is a waste of cycles when EPQ is active, but
no more than that, so it doesn't seem appropriate to back-patch further.
Tom Lane [Tue, 23 Jan 2018 21:50:34 +0000 (16:50 -0500)]
Teach reparameterize_path() to handle AppendPaths.
If we're inside a lateral subquery, there may be no unparameterized paths
for a particular child relation of an appendrel, in which case we *must*
be able to create similarly-parameterized paths for each other child
relation, else the planner will fail with "could not devise a query plan
for the given query". This means that there are situations where we'd
better be able to reparameterize at least one path for each child.
This calls into question the assumption in reparameterize_path() that
it can just punt if it feels like it. However, the only case that is
known broken right now is where the child is itself an appendrel so that
all its paths are AppendPaths. (I think possibly I disregarded that in
the original coding on the theory that nested appendrels would get folded
together --- but that only happens *after* reparameterize_path(), so it's
not excused from handling a child AppendPath.) Given that this code's been
like this since 9.3 when LATERAL was introduced, it seems likely we'd have
heard of other cases by now if there were a larger problem.
Per report from Elvis Pranskevichus. Back-patch to 9.3.
Robert Haas [Tue, 23 Jan 2018 16:13:42 +0000 (11:13 -0500)]
Report an ERROR if a parallel worker fails to start properly.
Commit 28724fd90d2f85a0573a8107b48abad062a86d83 fixed things so that
if a background worker fails to start due to fork() failure or because
it is terminated before startup succeeds, BGWH_STOPPED will be
reported. However, that only helps if the code that uses the
background worker machinery notices the change in status, and the code
in parallel.c did not.
To fix that, do two things. First, make sure that when a worker
exits, it triggers the leader to read from error queues. That way, if
a worker which has attached to an error queue exits uncleanly, the
leader is sure to throw some error, either the contents of the
ErrorResponse sent by the worker, or "lost connection to parallel
worker" if it exited without sending one. To cover the case where
the worker never starts up in the first place or exits before
attaching to the error queue, the ParallelContext now keeps track
of which workers have sent at least one message via the error
queue. A worker which sends no messages by the time the parallel
operation finishes will be checked to see whether it exited before
attaching to the error queue; if so, a new error message, "parallel
worker failed to initialize", will be reported. If not, we'll
continue to wait until it either starts up and exits cleanly, starts
up and exits uncleanly, or fails to start, and then take the
appropriate action.
Tom Lane [Mon, 22 Jan 2018 17:06:18 +0000 (12:06 -0500)]
Make pg_dump's ACL, sec label, and comment entries reliably identifiable.
_tocEntryRequired() expects that it can identify ACL, SECURITY LABEL,
and COMMENT TOC entries that are for large objects by seeing whether
the tag for them starts with "LARGE OBJECT ". While that works fine
for actual large objects, which are indeed tagged that way, it's
subject to false positives unless every such entry's tag starts with an
appropriate type ID. And in fact it does not work for ACLs, because
up to now we customarily tagged those entries with just the bare name
of the object. This means that an ACL for an object named
"LARGE OBJECT something" would be misclassified as data not schema,
with undesirable results in a schema-only or data-only dump ---
although pg_upgrade seems unaffected, due to the special case for
binary-upgrade mode further down in _tocEntryRequired().
We can fix this by changing all the dumpACL calls to use the label
strings already in use for comments and security labels, which do
follow the convention of starting with an object type indicator.
Well, mostly they follow it. dumpDatabase() got it wrong, using
just the bare database name for those purposes, so that a database
named "LARGE OBJECT something" would similarly be subject to having
its comment or security label dropped or included when not wanted.
Bring that into line too. (Note that up to now, database ACLs have
not been processed by pg_dump, so that this issue doesn't affect them.)
_tocEntryRequired() itself is not free of fault: it was overly liberal
about matching object tags to "LARGE OBJECT " in binary-upgrade mode.
This looks like it is probably harmless because there would be no data
component to strip anyway in that mode, but at best it's trouble
waiting to happen, so tighten that up too.
The possible misclassification of SECURITY LABEL entries for databases is
in principle a security problem, but the opportunities for actual exploits
seem too narrow to be interesting. The other cases seem like just bugs,
since an object owner can change its ACL or comment for himself, he needn't
try to trick someone else into doing it by choosing a strange name.
This has been broken since per-large-object TOC entries were introduced
in 9.0, so back-patch to all supported branches.
Bruce Momjian [Sun, 21 Jan 2018 02:47:02 +0000 (21:47 -0500)]
doc: update intermediate certificate instructions
Document how to properly create root and intermediate certificates using
v3_ca extensions and where to place intermediate certificates so they
are properly transferred to the remote side with the leaf certificate to
link to the remote root certificate. This corrects docs that used to
say that intermediate certificates must be stored with the root
certificate.
Also add instructions on how to create root, intermediate, and leaf
certificates.
Alvaro Herrera [Fri, 19 Jan 2018 13:15:08 +0000 (10:15 -0300)]
Fix StoreCatalogInheritance1 to use 32bit inhseqno
For no apparent reason, this function was using a 16bit-wide inhseqno
value, rather than the correct 32 bit width which is what is stored in
the pg_inherits catalog. This becomes evident if you try to create a
table with more than 65535 parents, because this error appears:
Needless to say, having so many parents is an uncommon situations, which
explains why this error has never been reported despite being having
been introduced with the Postgres95 1.01 sources in commit d31084e9d111:
https://git.postgresql.org/gitweb/?p=postgresql.git;a=blob;f=src/backend/commands/creatinh.c;hb=d31084e9d111#l349
Backpatch all the way back.
David Rowley noticed this while reviewing a patch of mine.
Discussion: https://postgr.es/m/CAKJS1f8Dn7swSEhOWwzZzssW7747YB=2Hi+T7uGud40dur69-g@mail.gmail.com
Tom Lane [Thu, 18 Jan 2018 16:09:44 +0000 (11:09 -0500)]
Extend configure's __int128 test to check for a known gcc bug.
On Sparc64, use of __attribute__(aligned(8)) with __int128 causes faulty
code generation in gcc versions at least through 5.5.0. We can work around
that by disabling use of __int128, so teach configure to test for the bug.
This solution doesn't fix things for the case of cross-compiling with a
buggy compiler; to support that nicely, we'd need to add a manual disable
switch. Unless more such cases turn up, it doesn't seem worth the work.
Affected users could always edit pg_config.h manually.
In passing, fix some typos in the existing configure test for __int128.
They're harmless because we only compile that code not run it, but
they're still confusing for anyone looking at it closely.
This is needed in support of commit 751804998, so back-patch to 9.5
as that was.
Robert Haas [Wed, 17 Jan 2018 21:18:39 +0000 (16:18 -0500)]
postgres_fdw: Avoid 'outer pathkeys do not match mergeclauses' error.
When pushing down a join to a foreign server, postgres_fdw constructs
an alternative plan to be used for any EvalPlanQual rechecks that
prove to be necessary. This plan is stored as the outer subplan of
the Foreign Scan implementing the pushed-down join. Previously, this
alternative plan could have a different nominal sort ordering than its
parent, which seemed OK since there will only be one tuple per base
table anyway in the case of an EvalPlanQual recheck. Actually,
though, it caused a problem if that path was used as a building block
for the EvalPlanQual recheck plan of a higher-level foreign join,
because we could end up with a merge join one of whose inputs was not
labelled with the correct sort order. Repair by injecting an extra
Sort node into the EvalPlanQual recheck plan whenever it would
otherwise fail to be sorted at least as well as its parent Foreign
Scan.
Report by Jeff Janes. Patch by me, reviewed by Tom Lane, who also
provided the test case and comment text.
Tom Lane [Fri, 12 Jan 2018 21:52:49 +0000 (16:52 -0500)]
Fix postgres_fdw to cope with duplicate GROUP BY entries.
Commit 7012b132d, which added the ability to push down aggregates and
grouping to the remote server, wasn't careful to ensure that the remote
server would have the same idea we do about which columns are the grouping
columns, in cases where there are textually identical GROUP BY expressions.
Such cases typically led to "targetlist item has multiple sortgroupref
labels" errors.
To fix this reliably, switch over to using "GROUP BY column-number" syntax
rather than "GROUP BY expression" in transmitted queries, and adjust
foreign_grouping_ok() to be more careful about duplicating the sortgroupref
labeling of the local pathtarget.
Per bug #14890 from Sean Johnston. Back-patch to v10 where the buggy code
was introduced.
Tom Lane [Fri, 12 Jan 2018 20:46:37 +0000 (15:46 -0500)]
Avoid unnecessary failure in SELECT concurrent with ALTER NO INHERIT.
If a query against an inheritance tree runs concurrently with an ALTER
TABLE that's disinheriting one of the tree members, it's possible to get
a "could not find inherited attribute" error because after obtaining lock
on the removed member, make_inh_translation_list sees that its columns
have attinhcount=0 and decides they aren't the columns it's looking for.
An ideal fix, perhaps, would avoid including such a just-removed member
table in the query at all; but there seems no way to accomplish that
without adding expensive catalog rechecks or creating a likelihood of
deadlocks. Instead, let's just drop the check on attinhcount. In this
way, a query that's included a just-disinherited child will still
succeed, which is not a completely unreasonable behavior.
This problem has existed for a long time, so back-patch to all supported
branches. Also add an isolation test verifying related behaviors.
Patch by me; the new isolation test is based on Kyotaro Horiguchi's work.
Tom Lane [Fri, 12 Jan 2018 17:24:50 +0000 (12:24 -0500)]
Fix incorrect handling of subquery pullup in the presence of grouping sets.
If we flatten a subquery whose target list contains constants or
expressions, when those output columns are used in GROUPING SET columns,
the planner was capable of doing the wrong thing by merging a pulled-up
expression into the surrounding expression during const-simplification.
Then the late processing that attempts to match subexpressions to grouping
sets would fail to match those subexpressions to grouping sets, with the
effect that they'd not go to null when expected.
To fix, wrap such subquery outputs in PlaceHolderVars, ensuring that
they preserve their separate identity throughout the planner's expression
processing. This is a bit of a band-aid, because the wrapper defeats
const-simplification even in places where it would be safe to allow.
But a nicer fix would likely be too invasive to back-patch, and the
consequences of the missed optimizations probably aren't large in most
cases.
Back-patch to 9.5 where grouping sets were introduced.
Heikki Linnakangas, with small mods and better test cases by me;
additional review by Andrew Gierth
Teodor Sigaev [Thu, 11 Jan 2018 11:42:16 +0000 (14:42 +0300)]
Fix behavior of ~> (cube, int) operator
~> (cube, int) operator was especially designed for knn-gist search.
However, it appears that knn-gist search can't work correctly with current
behavior of this operator when dataset contains cubes of variable
dimensionality. In this case, the same value of second operator argument
can point to different dimension depending on dimensionality of particular cube.
Such behavior is incompatible with gist indexing of cubes, and knn-gist doesn't
work correctly for it.
This patch changes behavior of ~> (cube, int) operator by introducing dimension
numbering where value of second argument unambiguously identifies number of
dimension. With new behavior, this operator can be correctly supported by
knn-gist. Relevant changes to cube operator class are also included.
Backpatch to v9.6 where operator was introduced.
Since behavior of ~> (cube, int) operator is changed, depending entities
must be refreshed after upgrade. Such as, expression indexes using this
operator must be reindexed, materialized views must be rebuilt, stored
procedures and client code must be revised to correctly use new behavior.
That should be mentioned in release notes.
Noticed by: Tomas Vondra
Author: Alexander Korotkov
Reviewed by: Tomas Vondra, Andrey Borodin
Discussion: https://www.postgresql.org/message-id/flat/a9657f6a-b497-36ff-e56-482a2c7e3292@2ndquadrant.com
Tom Lane [Wed, 10 Jan 2018 22:13:29 +0000 (17:13 -0500)]
Fix sample INSTR() functions in the plpgsql documentation.
These functions are stated to be Oracle-compatible, but they weren't.
Yugo Nagata noticed that while our code returns zero for a zero or
negative fourth parameter (occur_index), Oracle throws an error.
Further testing by me showed that there was also a discrepancy in the
interpretation of a negative third parameter (beg_index): Oracle thinks
that a negative beg_index indicates the last place where the target
substring can *begin*, whereas our code thinks it is the last place
where the target can *end*.
Adjust the sample code to behave like Oracle in both these respects.
Also change it to be a CDATA[] section, simplifying copying-and-pasting
out of the documentation source file. And fix minor problems in the
introductory comment, which wasn't very complete or accurate.
Back-patch to all supported branches. Although this patch only touches
documentation, we should probably call it out as a bug fix in the next
minor release notes, since users who have adopted the functions will
likely want to update their versions.
Tom Lane [Wed, 10 Jan 2018 20:50:54 +0000 (15:50 -0500)]
Remove dubious micro-optimization in ckpt_buforder_comparator().
It seems incorrect to assume that the list of CkptSortItems can never
contain duplicate page numbers: concurrent activity could result in some
page getting dropped from a low-numbered buffer and later loaded into a
high-numbered buffer while BufferSync is scanning the buffer pool.
If that happened, the comparator would give self-inconsistent results,
potentially confusing qsort(). Saving one comparison step is not worth
possibly getting the sort wrong.
So far as I can tell, nothing would actually go wrong given our current
implementation of qsort(). It might get a bit slower than expected
if there were a large number of duplicates of one value, but that's
surely a probability-epsilon case. Still, the comment is wrong,
and if we ever switched to another sort implementation it might be
less forgiving.
In passing, avoid casting away const-ness of the argument pointers;
I've not seen any compiler complaints from that, but it seems likely
that some compilers would not like it.
Back-patch to 9.6 where this code came in, just in case I've underestimated
the possible consequences.
Alvaro Herrera [Tue, 9 Jan 2018 18:54:39 +0000 (15:54 -0300)]
Change some bogus PageGetLSN calls to BufferGetLSNAtomic
As src/backend/access/transam/README says, PageGetLSN may only be called
by processes holding either exclusive lock on buffer, or a shared lock
on buffer plus buffer header lock. Therefore any place that only holds
a shared buffer lock must use BufferGetLSNAtomic instead of PageGetLSN,
which internally obtains buffer header lock prior to reading the LSN.
A few callsites failed to comply with this rule. This was detected by
running all tests under a new (not committed) assertion that verifies
PageGetLSN locking contract. All but one of the callsites that failed
the assertion are fixed by this patch. Remaining callsites were
inspected manually and determined not to need any change.
The exception (unfixed callsite) is in TestForOldSnapshot, which only
has a Page argument, making it impossible to access the corresponding
Buffer from it. Fixing that seems a much larger patch that will have to
be done separately; and that's just as well, since it was only
introduced in 9.6 and other bugs are much older.
Some of these bugs are ancient; backpatch all the way back to 9.3.
Tom Lane [Tue, 9 Jan 2018 17:34:46 +0000 (12:34 -0500)]
While waiting for a condition variable, detect postmaster death.
The general assumption for postmaster child processes is that they
should just exit(1), reasonably promptly, if the postmaster disappears.
condition_variable.c neglected this consideration and could be left
waiting forever, if the counterpart process it is waiting for has
done the right thing and exited.
We had some discussion of adjusting the WaitEventSet API to make it
harder to make this type of mistake in future; but for the moment,
and for v10, let's make this narrow fix.
Tom Lane [Tue, 9 Jan 2018 17:09:30 +0000 (12:09 -0500)]
Fix race condition during replication origin drop.
replorigin_drop() misunderstood the API for condition variables: it
had ConditionVariablePrepareToSleep and ConditionVariableCancelSleep
inside its test-and-sleep loop, rather than outside the loop as
intended. The net effect is a narrow race-condition window wherein,
if the process using a replication slot releases it immediately after
replorigin_drop() releases the ReplicationOriginLock, replorigin_drop()
would get into the condition variable's wait list too late and then
wait indefinitely for a signal that won't come.
Because there's a different CV for each replication slot, we can't
just move the ConditionVariablePrepareToSleep call to above the
test-and-sleep loop. What we can do, in the wake of commit 13db3b936,
is drop the ConditionVariablePrepareToSleep call entirely. This fix
depends on that commit because (at least in principle) the slot matching
the target replication origin might move around, so that once in a blue
moon successive loop iterations might involve different CVs. We can now
cope with such a scenario, at the cost of an extra trip through the
retry loop.
(There are ways we could fix this bug without depending on that commit,
but they're all a lot more complicated than this way.)
While at it, upgrade the rather skimpy comments in this function.
Tom Lane [Tue, 9 Jan 2018 16:39:10 +0000 (11:39 -0500)]
Allow ConditionVariable[PrepareTo]Sleep to auto-switch between CVs.
The original coding here insisted that callers manually cancel any prepared
sleep for one condition variable before starting a sleep on another one.
While that's not a huge burden today, it seems like a gotcha that will bite
us in future if the use of condition variables increases; anything we can
do to make the use of this API simpler and more robust is attractive.
Hence, allow these functions to automatically switch their attention to
a different CV when required. This is safe for the same reason it was OK
for commit aced5a92b to let a broadcast operation cancel any prepared CV
sleep: whenever we return to the other test-and-sleep loop, we will
automatically re-prepare that CV, paying at most an extra test of that
loop's exit condition.
Back-patch to v10 where condition variables were introduced. Ordinarily
we would probably not back-patch a change like this, but since it does not
invalidate any coding pattern that was legal before, it seems safe enough.
Furthermore, there's an open bug in replorigin_drop() for which the
simplest fix requires this. Even if we chose to fix that in some more
complicated way, the hazard would remain that we might back-patch some
other bug fix that requires this behavior.
Bruce Momjian [Tue, 9 Jan 2018 03:43:51 +0000 (22:43 -0500)]
pg_upgrade: prevent check on live cluster from generating error
Previously an inaccurate but harmless error was generated when running
--check on a live server before reporting the servers as compatible.
The fix is to split error reporting and exit control in the exec_prog()
API.
Reported-by: Daniel Westermann
Backpatch-through: 10
Tom Lane [Sat, 6 Jan 2018 00:42:49 +0000 (19:42 -0500)]
Reorder steps in ConditionVariablePrepareToSleep for more safety.
In the admittedly-very-unlikely case that AddWaitEventToSet fails,
ConditionVariablePrepareToSleep would error out after already having
set cv_sleep_target, which is probably bad, and after having already
set cv_wait_event_set, which is very bad. Transaction abort might or
might not clean up cv_sleep_target properly; but there is nothing
that would be aware that the WaitEventSet wasn't fully constructed,
so that all future condition variable sleeps would be broken.
We can easily guard against these hazards with slight restructuring.
Back-patch to v10 where condition_variable.c was introduced.
Tom Lane [Sat, 6 Jan 2018 00:21:30 +0000 (19:21 -0500)]
Rewrite ConditionVariableBroadcast() to avoid live-lock.
The original implementation of ConditionVariableBroadcast was, per its
self-description, "the dumbest way possible". Thomas Munro found out
it was a bit too dumb. An awakened process may immediately re-queue
itself, if the specific condition it's waiting for is not yet satisfied.
If this happens before ConditionVariableBroadcast is able to see the wait
queue as empty, then ConditionVariableBroadcast will re-awaken the same
process, repeating the cycle. Given unlucky timing this back-and-forth
can repeat indefinitely; loops lasting thousands of seconds have been
seen in testing.
To fix, add our own process to the end of the wait queue to serve as a
sentinel, and exit the broadcast loop once our process is not there
anymore. There are various special considerations described in the
comments, the principal disadvantage being that wakers can no longer
be sure whether they awakened a real waiter or just a sentinel. But in
practice nobody pays attention to the result of ConditionVariableSignal
or ConditionVariableBroadcast anyway, so that problem seems hypothetical.
Back-patch to v10 where condition_variable.c was introduced.
Alvaro Herrera [Fri, 5 Jan 2018 15:17:10 +0000 (12:17 -0300)]
Fix failure to delete spill files of aborted transactions
Logical decoding's reorderbuffer.c may spill transaction files to disk
when transactions are large. These are supposed to be removed when they
become "too old" by xid; but file removal requires the boundary LSNs of
the transaction to be known. The final_lsn is only set when we see the
commit or abort record for the transaction, but nothing sets the value
for transactions that crash, so the removal code misbehaves -- in
assertion-enabled builds, it crashes by a failed assertion.
To fix, modify the final_lsn of transactions that don't have a value
set, to the LSN of the very latest change in the transaction. This
causes the spilled files to be removed appropriately.
Tom Lane [Thu, 4 Jan 2018 19:59:00 +0000 (14:59 -0500)]
Fix incorrect computations of length of null bitmap in pageinspect.
Instead of using our standard macro for this calculation, this code
did it itself ... and got it wrong, leading to incorrect display of
the null bitmap in some cases. Noted and fixed by Maksim Milyutin.
In passing, remove a uselessly duplicative error check.
Errors were introduced in commit d6061f83a; back-patch to 9.6
where that came in.
Alvaro Herrera [Wed, 3 Jan 2018 14:16:34 +0000 (11:16 -0300)]
Revert "Fix isolation test to be less timing-dependent"
This reverts commit 2268e6afd596. It turned out that inconsistency in
the report is still possible, so go back to the simpler formulation of
the test and instead add an alternate expected output.
Andres Freund [Wed, 3 Jan 2018 20:00:11 +0000 (12:00 -0800)]
Rename pg_rewind's copy_file_range() to avoid conflict with new linux syscall.
Upcoming versions of glibc will contain copy_file_range(2), a wrapper
around a new linux syscall for in-kernel copying of data ranges. This
conflicts with pg_rewinds function of the same name.
Therefore rename pg_rewinds version. As our version isn't a generic
copying facility we decided to choose a rewind specific function name.
Per buildfarm animal caiman and subsequent discussion with Tom Lane.
Author: Andres Freund
Discussion:
https://postgr.es/m/20180103033425.w7jkljth3e26sduc@alap3.anarazel.de
https://postgr.es/m/31122.1514951044@sss.pgh.pa.us
Backpatch: 9.5-, where pg_rewind was introduced
Andrew Dunstan [Wed, 3 Jan 2018 20:26:39 +0000 (15:26 -0500)]
Fix use of config-specific libraries for Windows OpenSSL
Commit 614350a3 allowed for an different builds of OpenSSL libraries on
Windows, but ignored the fact that the alternative builds don't have
config-specific libraries. This patch fixes the Solution file to ask for
the correct libraries.
per offline discussions with Leonardo Cecchi and Marco Nenciarini,
Alvaro Herrera [Wed, 3 Jan 2018 20:26:20 +0000 (17:26 -0300)]
Make XactLockTableWait work for transactions that are not yet self-locked
XactLockTableWait assumed that its xid argument has already added itself
to the lock table. That assumption led to another assumption that if
locking the xid has succeeded but the xid is reported as still in
progress, then the input xid must have been a subtransaction.
These assumptions hold true for the original uses of this code in
locking related to on-disk tuples, but they break down in logical
replication slot snapshot building -- in particular, when a standby
snapshot logged contains an xid that's already in ProcArray but not yet
in the lock table. This leads to assertion failures that can be
reproduced all the way back to 9.4, when logical decoding was
introduced.
To fix, change SubTransGetParent to SubTransGetTopmostTransaction which
has a slightly different API: it returns the argument Xid if there is no
parent, and it goes all the way to the top instead of moving up the
levels one by one. Also, to avoid busy-waiting, add a 1ms sleep to give
the other process time to register itself in the lock table.
For consistency, change ConditionalXactLockTableWait the same way.
Author: Petr Jelínek
Discussion: https://postgr.es/m/1B3E32D8-FCF4-40B4-AEF9-5C0E3AC57969@postgrespro.ru Reported-by: Konstantin Knizhnik Diagnosed-by: Stas Kelvich, Petr Jelínek Reviewed-by: Andres Freund, Robert Haas
Alvaro Herrera [Tue, 2 Jan 2018 22:16:16 +0000 (19:16 -0300)]
Fix deadlock hazard in CREATE INDEX CONCURRENTLY
Multiple sessions doing CREATE INDEX CONCURRENTLY simultaneously are
supposed to be able to work in parallel, as evidenced by fixes in commit c3d09b3bd23f specifically to support this case. In reality, one of the
sessions would be aborted by a misterious "deadlock detected" error.
Jeff Janes diagnosed that this is because of leftover snapshots used for
system catalog scans -- this was broken by 8aa3e47510b9 keeping track of
(registering) the catalog snapshot. To fix the deadlocks, it's enough
to de-register that snapshot prior to waiting.
Backpatch to 9.4, which introduced MVCC catalog scans.
Include an isolationtester spec that 8 out of 10 times reproduces the
deadlock with the unpatched code for me (Álvaro).
Author: Jeff Janes Diagnosed-by: Jeff Janes Reported-by: Jeremy Finzel
Discussion: https://postgr.es/m/CAMa1XUhHjCv8Qkx0WOr1Mpm_R4qxN26EibwCrj0Oor2YBUFUTg%40mail.gmail.com
Noah Misch [Mon, 1 Jan 2018 05:58:29 +0000 (21:58 -0800)]
In tests, await an LSN no later than the recovery target.
Otherwise, the test fails with "Timed out while waiting for standby to
catch up". This happened rarely, perhaps only when autovacuum wrote WAL
between our choosing the recovery target and choosing the LSN to await.
Commit b26f7fa6ae2b4e5d64525b3d5bc66a0ddccd9e24 fixed one case of this.
Fix two more. Back-patch to 9.6, which introduced the affected test.
Magnus Hagander [Fri, 29 Dec 2017 15:19:51 +0000 (16:19 +0100)]
Properly set base backup backends to active in pg_stat_activity
When walsenders were included in pg_stat_activity, only the ones
actually streaming WAL were listed as active when they were active. In
particular, the connections sending base backups were listed as being
idle. Which means that a regular pg_basebackup would show up with one
active and one idle connection, when both were active.
This patch updates to set all walsenders to active when they are
(including those doing very fast things like IDENTIFY_SYSTEM), and then
back to idle. Details about exactly what they are doing is available in
pg_stat_replication.
Patch by me, review by Michael Paquier and David Steele.
Teodor Sigaev [Wed, 27 Dec 2017 15:26:58 +0000 (18:26 +0300)]
Update relation's stats in pg_class during vacuum full.
Hash index depends on estimation of numbers of tuples and pages of relations,
incorrect value could be a reason of significantly growing of index. Vacuum
full recreates heap and reindex all indexes before renewal stats. The patch
fixes that, so indexes will see correct values.
Backpatch to v10 only because earlier versions haven't usable hash index and
growing of hash index is a single user-visible symptom.
Author: Amit Kapila Reviewed-by: Ashutosh Sharma, me
Discussion: https://www.postgresql.org/message-id/flat/20171115232922.5tomkxnw3iq6jsg7@inml.weebeastie.net
Tom Lane [Fri, 22 Dec 2017 17:08:18 +0000 (12:08 -0500)]
Fix UNION/INTERSECT/EXCEPT over no columns.
Since 9.4, we've allowed the syntax "select union select" and variants
of that. However, the planner wasn't expecting a no-column set operation
and ended up treating the set operation as if it were UNION ALL.
Turns out it's trivial to fix in v10 and later; we just need to be careful
about not generating a Sort node with no sort keys. However, since a weird
corner case like this is never going to be exercised by developers, we'd
better have thorough regression tests if we want to consider it supported.
Robert Haas [Thu, 21 Dec 2017 14:09:04 +0000 (09:09 -0500)]
Cancel CV sleep during subtransaction abort.
Generally, error recovery paths that need to do things like
LWLockReleaseAll and pgstat_report_wait_end also need to call
ConditionVariableCancelSleep, but AbortSubTransaction was missed.
Since subtransaction abort might destroy up the DSM segment that
contains the ConditionVariable stored in cv_sleep_target, this
can result in a crash for anything using condition variables.
Robert Haas [Tue, 19 Dec 2017 17:21:56 +0000 (12:21 -0500)]
Try again to fix accumulation of parallel worker instrumentation.
When a Gather or Gather Merge node is started and stopped multiple
times, accumulate instrumentation data only once, at the end, instead
of after each execution, to avoid recording inflated totals.
Commit 778e78ae9fa51e58f41cbdc72b293291d02d8984, the previous attempt
at a fix, instead reset the state after every execution, which worked
for the general instrumentation data but had problems for the additional
instrumentation specific to Sort and Hash nodes.
Report by hubert depesz lubaczewski. Analysis and fix by Amit Kapila,
following a design proposal from Thomas Munro, with a comment tweak
by me.
Fujii Masao [Mon, 18 Dec 2017 18:46:14 +0000 (03:46 +0900)]
Fix bug in cancellation of non-exclusive backup to avoid assertion failure.
Previously an assertion failure occurred when pg_stop_backup() for
non-exclusive backup was aborted while it's waiting for WAL files to
be archived. This assertion failure happened in do_pg_abort_backup()
which was called when a non-exclusive backup was canceled.
do_pg_abort_backup() assumes that there is at least one non-exclusive
backup running when it's called. But pg_stop_backup() can be canceled
even after it marks the end of non-exclusive backup (e.g.,
during waiting for WAL archiving). This broke the assumption that
do_pg_abort_backup() relies on, and which caused an assertion failure.
This commit changes do_pg_abort_backup() so that it does nothing
when non-exclusive backup has been already marked as completed.
That is, the asssumption is also changed, and do_pg_abort_backup()
now can handle even the case where it's called when there is
no running backup.
Backpatch to 9.6 where SQL-callable non-exclusive backup was added.
Author: Masahiko Sawada and Michael Paquier Reviewed-By: Robert Haas and Fujii Masao
Discussion: https://www.postgresql.org/message-id/CAD21AoD2L1Fu2c==gnVASMyFAAaq3y-AQ2uEVj-zTCGFFjvmDg@mail.gmail.com
Robert Haas [Mon, 18 Dec 2017 17:17:37 +0000 (12:17 -0500)]
Fix crashes on plans with multiple Gather (Merge) nodes.
es_query_dsa turns out to be broken by design, because it supposes
that there is only one DSA for the whole query, whereas there is
actually one per Gather (Merge) node. For now, work around that
problem by setting and clearing the pointer around the sections of
code that might need it. It's probably a better idea to get rid of
es_query_dsa altogether in favor of having each node keep track
individually of which DSA is relevant, but that seems like more than
we would want to back-patch.
Thomas Munro, reviewed and tested by Andreas Seltenreich, Amit
Kapila, and by me.
Noah Misch [Sat, 16 Dec 2017 18:03:35 +0000 (10:03 -0800)]
Avoid and detect SIGPIPE race in TAP tests.
Don't write to stdin of a psql process that could have already exited
with an authentication failure. Buildfarm members crake and mandrill
have failed once by doing so. Ignore SIGPIPE in all TAP tests.
Back-patch to v10, where these tests were introduced.
Andres Freund [Tue, 14 Nov 2017 02:45:47 +0000 (18:45 -0800)]
Perform a lot more sanity checks when freezing tuples.
The previous commit has shown that the sanity checks around freezing
aren't strong enough. Strengthening them seems especially important
because the existance of the bug has caused corruption that we don't
want to make even worse during future vacuum cycles.
The errors are emitted with ereport rather than elog, despite being
"should never happen" messages, so a proper error code is emitted. To
avoid superflous translations, mark messages as internal.
Author: Andres Freund and Alvaro Herrera Reviewed-By: Alvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
Backpatch: 9.3-
Andres Freund [Fri, 3 Nov 2017 14:52:29 +0000 (07:52 -0700)]
Fix pruning of locked and updated tuples.
Previously it was possible that a tuple was not pruned during vacuum,
even though its update xmax (i.e. the updating xid in a multixact with
both key share lockers and an updater) was below the cutoff horizon.
As the freezing code assumed, rightly so, that that's not supposed to
happen, xmax would be preserved (as a member of a new multixact or
xmax directly). That causes two problems: For one the tuple is below
the xmin horizon, which can cause problems if the clog is truncated or
once there's an xid wraparound. The bigger problem is that that will
break HOT chains, which in turn can lead two to breakages: First,
failing index lookups, which in turn can e.g lead to constraints being
violated. Second, future hot prunes / vacuums can end up making
invisible tuples visible again. There's other harmful scenarios.
Fix the problem by recognizing that tuples can be DEAD instead of
RECENTLY_DEAD, even if the multixactid has alive members, if the
update_xid is below the xmin horizon. That's safe because newer
versions of the tuple will contain the locking xids.
A followup commit will harden the code somewhat against future similar
bugs and already corrupted data.
Author: Andres Freund, with changes by Alvaro Herrera Reported-By: Daniel Wood Analyzed-By: Andres Freund, Alvaro Herrera, Robert Haas, Peter
Geoghegan, Daniel Wood, Yi Wen Wong, Michael Paquier Reviewed-By: Alvaro Herrera, Robert Haas, Michael Paquier
Discussion:
https://postgr.es/m/E5711E62-8FDF-4DCA-A888-C200BF6B5742@amazon.com
https://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
Backpatch: 9.3-
Andrew Dunstan [Thu, 14 Dec 2017 16:13:14 +0000 (11:13 -0500)]
Fix walsender timeouts when decoding a large transaction
The logical slots have a fast code path for sending data so as not to
impose too high a per message overhead. The fast path skips checks for
interrupts and timeouts. However, the existing coding failed to consider
the fact that a transaction with a large number of changes may take a
very long time to be processed and sent to the client. This causes the
walsender to ignore interrupts for potentially a long time and more
importantly it will result in the walsender being killed due to
timeout at the end of such a transaction.
This commit changes the fast path to also check for interrupts and only
allows calling the fast path when the last keepalive check happened less
than half the walsender timeout ago. Otherwise the slower code path will
be taken.
Backpatched to 9.4
Petr Jelinek, reviewed by Kyotaro HORIGUCHI, Yura Sokolov, Craig
Ringer and Robert Haas.
Tom Lane [Mon, 11 Dec 2017 21:33:20 +0000 (16:33 -0500)]
Fix corner-case coredump in _SPI_error_callback().
I noticed that _SPI_execute_plan initially sets spierrcontext.arg = NULL,
and only fills it in some time later. If an error were to happen in
between, _SPI_error_callback would try to dereference the null pointer.
This is unlikely --- there's not much between those points except
push-snapshot calls --- but it's clearly not impossible. Tweak the
callback to do nothing if the pointer isn't set yet.
It's been like this for awhile, so back-patch to all supported branches.
Noah Misch [Sat, 9 Dec 2017 08:58:55 +0000 (00:58 -0800)]
MSVC 2012+: Permit linking to 32-bit, MinGW-built libraries.
Notably, this permits linking to the 32-bit Perl binaries advertised on
perl.org, namely Strawberry Perl and ActivePerl. This has a side effect
of permitting linking to binaries built with obsolete MSVC versions.
By default, MSVC 2012 and later require a "safe exception handler table"
in each binary. MinGW-built, 32-bit DLLs lack the relevant exception
handler metadata, so linking to them failed with error LNK2026. Restore
the semantics of MSVC 2010, which omits the table from a given binary if
some linker input lacks metadata. This has no effect on 64-bit builds
or on MSVC 2010 and earlier. Back-patch to 9.3 (all supported
versions).
Noah Misch [Sat, 9 Dec 2017 02:06:05 +0000 (18:06 -0800)]
MSVC: Test whether 32-bit Perl needs -D_USE_32BIT_TIME_T.
Commits 5a5c2feca3fd858e70ea348822595547e6fa6c15 and b5178c5d08ca59e30f9d9428fa6fdb2741794e65 introduced support for modern
MSVC-built, 32-bit Perl, but they broke use of MinGW-built, 32-bit Perl
distributions like Strawberry Perl and modern ActivePerl. Perl has no
robust means to report whether it expects a -D_USE_32BIT_TIME_T ABI, so
test this. Back-patch to 9.3 (all supported versions).
The chief alternative was a heuristic of adding -D_USE_32BIT_TIME_T when
$Config{gccversion} is nonempty. That banks on every gcc-built Perl
using the same ABI. gcc could change its default ABI the way MSVC once
did, and one could build Perl with gcc and the non-default ABI.
The GNU make build system could benefit from a similar test, without
which it does not support MSVC-built Perl. For now, just add a comment.
Most users taking the special step of building Perl with MSVC probably
build PostgreSQL with MSVC.
Add support to the SCRAM exchange for clients that support channel
binding, such as PostgreSQL version 11 and beyond. If such a client
encounters a PostgreSQL 10 server that does not support channel binding,
it will send a channel binding flag 'y', meaning the client supports
channel binding but thinks the server does not. But PostgreSQL 10
erroneously did not accept that flag. This would cause connections to
fail if a version 11 client connects to a version 10 server with SCRAM
authentication over SSL.
Author: Michael Paquier <michael.paquier@gmail.com>
A COPY into a table should apply identity sequence values just like it
does for ordinary defaults. This was previously forgotten, leading to
null values being inserted, which in turn would fail because identity
columns have not-null constraints.
Author: Michael Paquier <michael.paquier@gmail.com> Reported-by: Steven Winfield <steven.winfield@cantabcapital.com>
Bug: #14952
Robert Haas [Wed, 6 Dec 2017 13:49:30 +0000 (08:49 -0500)]
Report failure to start a background worker.
When a worker is flagged as BGW_NEVER_RESTART and we fail to start it,
or if it is not marked BGW_NEVER_RESTART but is terminated before
startup succeeds, what BgwHandleStatus should be reported? The
previous code really hadn't considered this possibility (as indicated
by the comments which ignore it completely) and would typically return
BGWH_NOT_YET_STARTED, but that's not a good answer, because then
there's no way for code using GetBackgroundWorkerPid() to tell the
difference between a worker that has not started but will start
later and a worker that has not started and will never be started.
So, when this case happens, return BGWH_STOPPED instead. Update the
comments to reflect this.
The preceding fix by itself is insufficient to fix the problem,
because the old code also didn't send a notification to the process
identified in bgw_notify_pid when startup failed. That might've
been technically correct under the theory that the status of the
worker was BGWH_NOT_YET_STARTED, because the status would indeed not
change when the worker failed to start, but now that we're more
usefully reporting BGWH_STOPPED, a notification is needed.
Without these fixes, code which starts background workers and then
uses the recommended APIs to wait for those background workers to
start would hang indefinitely if the postmaster failed to fork a
worker.
Robert Haas [Tue, 5 Dec 2017 19:35:42 +0000 (14:35 -0500)]
Fix accumulation of parallel worker instrumentation.
When a Gather or Gather Merge node is started and stopped multiple
times, the old code wouldn't reset the shared state between executions,
potentially resulting in dramatically inflated instrumentation data
for nodes beneath it. (The per-worker instrumentation ended up OK,
I think, but the overall totals were inflated.)
Report by hubert depesz lubaczewski. Analysis and fix by Amit Kapila,
reviewed and tweaked a bit by me.
Tom Lane [Mon, 4 Dec 2017 22:02:52 +0000 (17:02 -0500)]
Clean up assorted messiness around AllocateDir() usage.
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Tom Lane [Mon, 4 Dec 2017 16:51:43 +0000 (11:51 -0500)]
Support boolean columns in functional-dependency statistics.
There's no good reason that the multicolumn stats stuff shouldn't work on
booleans. But it looked only for "Var = pseudoconstant" clauses, and it
will seldom find those for boolean Vars, since earlier phases of planning
will fold "boolvar = true" or "boolvar = false" to just "boolvar" or
"NOT boolvar" respectively. Improve dependencies_clauselist_selectivity()
to recognize such clauses as equivalent to equality restrictions.
This fixes a failure of the extended stats mechanism to apply in a case
reported by Vitaliy Garnashevich. It's not a complete solution to his
problem because the bitmap-scan costing code isn't consulting extended
stats where it should, but that's surely an independent issue.
In passing, improve some comments, get rid of a NumRelids() test that's
redundant with the preceding bms_membership() test, and fix
dependencies_clauselist_selectivity() so that estimatedclauses actually
is a pure output argument as stated by its API contract.
Noah Misch [Thu, 30 Nov 2017 08:57:22 +0000 (00:57 -0800)]
Fix non-GNU makefiles for AIX make.
Invoking the Makefile without an explicit target was building every
possible target instead of just the "all" target. Back-patch to 9.3
(all supported versions).
Robert Haas [Tue, 28 Nov 2017 17:05:52 +0000 (12:05 -0500)]
Fix ReinitializeParallelDSM to tolerate finding no error queues.
Commit d4663350646ca0c069a36d906155a0f7e3372eb7 changed things so
that shm_toc_lookup would fail with an error rather than silently
returning NULL in the hope that such failures would be reported
in a useful way rather than via a system crash. However, it
overlooked the fact that the lookup of PARALLEL_KEY_ERROR_QUEUE
in ReinitializeParallelDSM is expected to fail when no DSM segment
was created in the first place; in that case, we end up with a
backend-private memory segment that still contains an entry for
PARALLEL_KEY_FIXED but no others. Consequently a benign failure
to initialize parallelism can escalate into an elog(ERROR);
repair.
Robert Haas [Tue, 28 Nov 2017 16:39:16 +0000 (11:39 -0500)]
Teach bitmap heap scan to cope with absence of a DSA.
If we have a plan that uses parallelism but are unable to execute it
using parallelism, for example due to a lack of available DSM
segments, then the EState's es_query_dsa will be NULL. Parallel
bitmap heap scan needs to fall back to a non-parallel scan in such
cases.
Tom Lane [Tue, 28 Nov 2017 00:22:08 +0000 (19:22 -0500)]
Fix assorted syscache lookup sloppiness in partition-related code.
heap_drop_with_catalog and ATExecDetachPartition neglected to check for
SearchSysCache failures, as noted in bugs #14927 and #14928 from Pan Bian.
Such failures are pretty unlikely, since we should already have some sort
of lock on the rel at these points, but it's neither a good idea nor
per project style to omit a check for failure.
Also, StorePartitionKey contained a syscache lookup that it never did
anything with, including never releasing the result. Presumably the
reason why we don't see refcount-leak complaints is that the lookup
always fails; but in any case it's pretty useless, so remove it.
All of these errors were evidently introduced by the relation
partitioning feature. Back-patch to v10 where that came in.
Tom Lane [Mon, 27 Nov 2017 22:53:56 +0000 (17:53 -0500)]
Fix creation of resjunk tlist entries for inherited mixed UPDATE/DELETE.
rewriteTargetListUD's processing is dependent on the relkind of the query's
target table. That was fine at the time it was made to act that way, even
for queries on inheritance trees, because all tables in an inheritance tree
would necessarily be plain tables. However, the 9.5 feature addition
allowing some members of an inheritance tree to be foreign tables broke the
assumption that rewriteTargetListUD's output tlist could be applied to all
child tables with nothing more than column-number mapping. This led to
visible failures if foreign child tables had row-level triggers, and would
also break in cases where child tables belonged to FDWs that used methods
other than CTID for row identification.
To fix, delay running rewriteTargetListUD until after the planner has
expanded inheritance, so that it is applied separately to the (already
mapped) tlist for each child table. We can conveniently call it from
preprocess_targetlist. Refactor associated code slightly to avoid the
need to heap_open the target relation multiple times during
preprocess_targetlist. (The APIs remain a bit ugly, particularly around
the point of which steps scribble on parse->targetList and which don't.
But avoiding such scribbling would require a change in FDW callback APIs,
which is more pain than it's worth.)
Also fix ExecModifyTable to ensure that "tupleid" is reset to NULL when
we transition from rows providing a CTID to rows that don't. (That's
really an independent bug, but it manifests in much the same cases.)
Add a regression test checking one manifestation of this problem, which
was that row-level triggers on a foreign child table did not work right.
Back-patch to 9.5 where the problem was introduced.
Etsuro Fujita, reviewed by Ildus Kurbangaliev and Ashutosh Bapat
Tom Lane [Sun, 26 Nov 2017 20:17:25 +0000 (15:17 -0500)]
Pad XLogReaderState's main_data buffer more aggressively.
Originally, we palloc'd this buffer just barely big enough to hold the
largest xlog record seen so far. It turns out that that can result in
valgrind complaints, because some compilers will emit code that assumes
it can safely fetch padding bytes at the end of a struct, and those
padding bytes were unallocated so far as aset.c was concerned. We can
fix that by MAXALIGN'ing the palloc request size, ensuring that it is big
enough to include any possible padding that might've been omitted from
the on-disk record.
An additional objection to the original coding is that it could result in
many repeated palloc cycles, in the worst case where we see a series of
gradually larger xlog records. We can ameliorate that cheaply by
imposing a minimum buffer size that's large enough for most xlog records.
BLCKSZ/2 was chosen after a bit of discussion.
In passing, remove an obsolete comment in struct xl_heap_new_cid that the
combocid field is free due to alignment considerations. Perhaps that was
true at some point, but it's not now.
projects / postgresql / log