]>
granicus.if.org Git - ngircd/log
Alexander Barton [Tue, 24 Jan 2012 01:44:57 +0000 (02:44 +0100)]
New function Conn_UpdatePing() to update the "ping timestamp"
Alexander Barton [Tue, 24 Jan 2012 01:43:55 +0000 (02:43 +0100)]
Conn_UpdateIdle(): Code cleanup
Alexander Barton [Mon, 23 Jan 2012 21:07:40 +0000 (22:07 +0100)]
RPL_ISUPPORT_MSG(005): add "EXCEPTS=e INVEX=I"
Thanks to Cahata for the idea!
Alexander Barton [Mon, 23 Jan 2012 20:51:38 +0000 (21:51 +0100)]
Fix "MAXLIST=beI:50": the limit is the sum of all lists
"Modes which are specified in the same pair share the same maximum size",
so "beI:50" means a total of 50 entries, regardless of the list.
See <http://www.irc.org/tech_docs/draft-brocklesby-irc-isupport-03.txt>,
thanks to Cahata for reporting this!
Alexander Barton [Mon, 23 Jan 2012 11:30:16 +0000 (12:30 +0100)]
Update NEWS and ChangeLog files
Alexander Barton [Sun, 22 Jan 2012 21:41:39 +0000 (22:41 +0100)]
New RPL_WHOISHOST_MSG(378): show hostname and IP address
The numeric RPL_WHOISHOST_MSG(378) returns the DNS hostname (if
available) and the IP address of a client in the WHOIS reply.
Only the user itself and local IRC operators get this numeric.
Alexander Barton [Sun, 22 Jan 2012 21:35:27 +0000 (22:35 +0100)]
New function Conn_GetIPAInfo(): get IP address of a connection
Alexander Barton [Sun, 22 Jan 2012 17:53:16 +0000 (18:53 +0100)]
G/K-Lines: only add and delete valid IRC masks
Alexander Barton [Sun, 22 Jan 2012 17:35:54 +0000 (18:35 +0100)]
Check G/K-Lines before the client has been registered, too
This allows to use "*!<user>@<host>" or "*!*@<host>" masks to reject
clients even before receiving PASS, NICK and USER commands and before
forking authentication child processes which reduces resource usage.
Alexander Barton [Sun, 22 Jan 2012 17:33:45 +0000 (18:33 +0100)]
Streamline handling of connection rejects (bad password, G/K-line)
- Use Client_Reject(), get rid of Reject_Client().
- Refactor Class_IsMember() to Class_GetMemberReason(),
- New function Class_HandleServerBans().
Alexander Barton [Sun, 22 Jan 2012 17:17:28 +0000 (18:17 +0100)]
New function Client_Reject() to reject clients on connect
Alexander Barton [Sun, 22 Jan 2012 17:11:24 +0000 (18:11 +0100)]
New function Lists_CheckReason() to get reason of list entries
Alexander Barton [Sun, 22 Jan 2012 14:58:39 +0000 (15:58 +0100)]
Update NEWS and ChangeLog files
Alexander Barton [Sun, 22 Jan 2012 14:41:21 +0000 (15:41 +0100)]
Fix ERR_{SUMMON|USERS}DISABLED: don't repeat command name in reply
Alexander Barton [Sat, 21 Jan 2012 18:59:57 +0000 (19:59 +0100)]
Implement channel exception list (mode 'e')
This allows a channel operator to define exception masks that allow users
to join the channel even when a "ban" would match and prevent them from
joining: the exception list (e) overrides the ban list (b).
Alexander Barton [Sat, 21 Jan 2012 18:27:03 +0000 (19:27 +0100)]
{Add|Del}_Ban_Invite > {Add_To|Del_From}_List(): more generic
Alexander Barton [Sat, 21 Jan 2012 12:48:31 +0000 (13:48 +0100)]
Rename ShowInvitesBans() to ShowChannelList(), make it more flexible
Alexander Barton [Sat, 21 Jan 2012 12:21:36 +0000 (13:21 +0100)]
PRIVMSG/NOTICE: handle nick!user@host masks case-insensitive
And enhance our test suite to check this a little bit better :-)
Alexander Barton [Mon, 16 Jan 2012 11:37:37 +0000 (12:37 +0100)]
PRIVMSG/NOTICE: don't stop list processing on invalid target
Process further targets, even if one has been a server ID:
just skip this one with an error message and continue.
Alexander Barton [Mon, 16 Jan 2012 10:43:22 +0000 (11:43 +0100)]
Implement user mode 'C': require "same channel" to send message
If the target user of a PRIVMSG or NOTICE command has the user mode 'C'
set, it is required that both sender and receiver are on the same channel.
This prevents private flooding by completely unknown clients.
Alexander Barton [Mon, 16 Jan 2012 01:18:24 +0000 (02:18 +0100)]
New RPL_WHOISREGNICK_MSG(307) numeric: indicate if nick is registered
Alexander Barton [Mon, 16 Jan 2012 01:15:41 +0000 (02:15 +0100)]
IRC_WHOIS_SendReply(): Code cleanup
Alexander Barton [Sun, 15 Jan 2012 23:26:12 +0000 (00:26 +0100)]
Limit channel invite and ban lists to 50 entries
- New function Lists_Count().
- New limit #define MAX_HNDL_CHANNEL_LISTS = 50.
- New numeric #define ERR_LISTFULL_MSG(478).
- Adjust numeric RPL_ISUPPORT2_MSG(005) accordingly ("MAXLIST")
Alexander Barton [Sun, 15 Jan 2012 23:15:26 +0000 (00:15 +0100)]
Make Send_ListChange() a little bit more generic
Alexander Barton [Sun, 15 Jan 2012 18:46:00 +0000 (19:46 +0100)]
Remove unused prototype of Lists_AlreadyRegistered()
This prototype has been introduced by commit
fa7bb279 in 2006,
but as far as I can see, this function never existed ...
Alexander Barton [Sun, 15 Jan 2012 18:07:15 +0000 (19:07 +0100)]
Channel lists: Fix duplicate check and error messages
- Check correct list for duplicates when adding items.
- Don't generate any messages when adding duplicates or removing
non-existing items (this is how ircd-seven and ircu behave).
- Code cleanup: Add_Ban_Invite(), Del_Ban_Invite().
Alexander Barton [Sun, 15 Jan 2012 13:33:04 +0000 (14:33 +0100)]
Don't enforce MAX_HNDL_MODES_ARG on server and service links
Alexander Barton [Sat, 14 Jan 2012 11:29:53 +0000 (12:29 +0100)]
Update documentation (fix some URL, update some info)
Alexander Barton [Fri, 13 Jan 2012 18:23:07 +0000 (19:23 +0100)]
Update NEWS and ChangeLog for next ngIRCd release once more
Alexander Barton [Fri, 13 Jan 2012 09:43:05 +0000 (10:43 +0100)]
Don't stop join handling on faulty channel, skip it (part #2)
Commit
565523cb allowed processing of further channel names given to the
JOIN command when a single name was invalid.
After this patch, the JOIN command handler continues to process channel
name lists even after errors like "channel is full", "too many channels",
and the like and generates appropriate error messages for all the
channels given by the client.
Alexander Barton [Fri, 13 Jan 2012 09:40:20 +0000 (10:40 +0100)]
JOIN command: don't check channel limit if already member
Don't check the channel limit and don't report "too many channels"
when trying to join a channel that the client is already a member of.
Alexander Barton [Mon, 9 Jan 2012 22:18:39 +0000 (23:18 +0100)]
Return ERR_UNKNOWNMODE(472) for unknown channel modes
The daemon reported ERR_UMODEUNKNOWNFLAG(501), which is wrong.
Alexander Barton [Mon, 9 Jan 2012 11:34:55 +0000 (12:34 +0100)]
Numberic 005 (ISUPPORT), CHANMODES: add "O", "R", "z" modes
Alexander Barton [Fri, 6 Jan 2012 19:06:25 +0000 (20:06 +0100)]
Limit list replies of LIST, WHO, WHOIS, and MAX_RPL_WHOWAS
Introduce new #define's MAX_RPL_LIST(100), MAX_RPL_WHO(25),
MAX_RPL_WHOIS(10), and MAX_RPL_WHOWAS(25).
Alexander Barton [Fri, 6 Jan 2012 19:05:07 +0000 (20:05 +0100)]
New function IRC_CheckListTooBig() to check size of list replies
It the limit is reached, a NOTICE is sent to the client and list
processing should stop.
Alexander Barton [Fri, 6 Jan 2012 18:55:21 +0000 (19:55 +0100)]
LIST command: compare pattern case insensitive
Alexander Barton [Fri, 6 Jan 2012 18:54:23 +0000 (19:54 +0100)]
IRC_LIST(): Code cleanup
Alexander Barton [Fri, 6 Jan 2012 17:56:53 +0000 (18:56 +0100)]
DEFAULT_WHOWAS->DEF_RPL_WHOWAS; MAX_CMODES_ARG->MAX_HNDL_MODES_ARG
To streamline naming, in preparation for MAX_RPL_WHO and MAX_RPL_WHOWAS :-)
Alexander Barton [Fri, 6 Jan 2012 17:25:10 +0000 (18:25 +0100)]
defines.h: Code cleanup and (a little bit) more documentation
Alexander Barton [Fri, 6 Jan 2012 16:46:52 +0000 (17:46 +0100)]
RPL_ISUPPORT (numeric 005): Report MODES=<MAX_CMODES_ARG>
"Maximum number of channel modes with parameter allowed per MODE command."
See <http://www.irc.org/tech_docs/005.html> for details.
Alexander Barton [Fri, 6 Jan 2012 16:42:52 +0000 (17:42 +0100)]
Channel modes: really break handling when MAX_CMODES_ARG is hit
This fixes
98493077 .
Alexander Barton [Fri, 6 Jan 2012 16:27:29 +0000 (17:27 +0100)]
channel modes: only handle MAX_CMODES_ARG modes with arguments
Limit the MODE command to handle a maximum of MAX_CMODES_ARG (5) channel
modes that require an argument (+Ibkl) per call.
Please note: Further modes that require arguments are silently ignored
and end the handling of any further modes.
This is similar to the behavior of ircd2.11 (silently ignores but seems
to handle other modes) as well as ircd-seven (silently ignores but handles
some(!) other modes) ...
Alexander Barton [Fri, 6 Jan 2012 16:24:55 +0000 (17:24 +0100)]
Fix handling of channel mode sequence with/without arguments
For example, don't generate wrong error messages when handling
"MODE #chan +IIIIItn *!aa@b *!bb@c *!cc@d *!dd@e *!ee@f".
Alexander Barton [Fri, 6 Jan 2012 02:26:24 +0000 (03:26 +0100)]
Conn_Write(): Make sure there is a client when detecting its type
The assert(client != NULL) got triggered during our tests, so there is
an error path that resulted in the connection being still established
(sock >= 0) but the client structure already freed.
So Conn_Write() should handle it!
Alexander Barton [Fri, 6 Jan 2012 01:26:04 +0000 (02:26 +0100)]
Proc_Close(): Only close socket if it is still valid
It could be invalid when calling Proc_Close() a 2nd time, for exmaple,
which could happen when we hit a timeout doing IDENT requests :-(
Alexander Barton [Wed, 4 Jan 2012 23:51:39 +0000 (00:51 +0100)]
WHOIS command: make sure matching is case-insensitive
And make sure that RPL_ENDOFWHOIS replies with the unmodified mask
like it has been received from the client.
Alexander Barton [Wed, 4 Jan 2012 23:24:46 +0000 (00:24 +0100)]
WHOIS command: don't anser queries for IRC servers
Thanks to Cahata for spotting this!
Alexander Barton [Wed, 4 Jan 2012 23:22:57 +0000 (00:22 +0100)]
WHOIS command: make sure the reply ends with RPL_ENDOFWHOIS
Up to now, each reply for itself ended in RPL_ENDOFWHOIS and queries
for unknown nick names lacked the RPL_ENDOFWHOIS -- both is wrong.
Alexander Barton [Wed, 4 Jan 2012 22:30:55 +0000 (23:30 +0100)]
README: update features list, borrow from list on our website
Alexander Barton [Wed, 4 Jan 2012 21:51:02 +0000 (22:51 +0100)]
LINKS command: support <mask> parameter
The <mask> can be used to limit the servers shown in the listing.
Alexander Barton [Wed, 4 Jan 2012 21:49:18 +0000 (22:49 +0100)]
IRC_LINKS(): Code cleanup; more documentation
Alexander Barton [Wed, 4 Jan 2012 20:43:32 +0000 (21:43 +0100)]
Add 1 second penalty for every further target on PRIVMSG/NOTICE
This reduces the possibility of flooding channels with commands like
"PRIVMSG/NOTICE #a,#n,#c,... :message" a little bit.
Problem noticed by Cahata -- thanks!
Alexander Barton [Wed, 4 Jan 2012 20:39:46 +0000 (21:39 +0100)]
Conn_SetPenalty(): Add new "penalty time" on each function call
Until now, the penalty time has only been set when longer as the
already set one, so it didn't accumulate.
And add documentation for and clean up code in Conn_SetPenalty() and
Conn_ResetPenalty() functions.
Alexander Barton [Tue, 3 Jan 2012 20:05:35 +0000 (21:05 +0100)]
Enhance log messages when setting user and group
Alexander Barton [Tue, 3 Jan 2012 19:49:42 +0000 (20:49 +0100)]
NGIRCd_getNobodyID(): Code cleanup
Alexander Barton [Tue, 3 Jan 2012 19:37:41 +0000 (20:37 +0100)]
Display correct error message when "Server{UID|GID}" is invalid
This partly closes bug #118. ngIRCd still starts up even when
Server{UID|GID} is invalid: then the daemon falls back to "nobody"
when running with root(0) privileges (as before).
Alexander Barton [Tue, 3 Jan 2012 18:34:54 +0000 (19:34 +0100)]
NGIRCd_Init(): Code cleanup
Alexander Barton [Tue, 3 Jan 2012 18:25:31 +0000 (19:25 +0100)]
main(): Code cleanup
Alexander Barton [Tue, 3 Jan 2012 17:56:31 +0000 (18:56 +0100)]
README: point to included COPYING file, not gnu.org
Alexander Barton [Tue, 3 Jan 2012 10:30:45 +0000 (11:30 +0100)]
Update Copyright notices for 2012
Florian Westphal [Mon, 2 Jan 2012 22:37:46 +0000 (23:37 +0100)]
lists: don't crash if reason ptr is NULL
commit
15fec92ed75c3de0b32c40d005e93e3f61aef77e
(Update list item, if it already exists) can make ngircd
crash because 'Reason' can be NULL, as reported by
Cahata on the ngircd mailing list.
Doesn't affect any released ngircd versions.
Also, make sure that we do not pass NULL as arguments
to a '%s' printf-like function.
Alexander Barton [Mon, 2 Jan 2012 14:23:17 +0000 (15:23 +0100)]
Don't stop join handling on faulty channel, skip it
When JOIN is received with more than one channel name, don't stop
processing on the first error (e.g. bad name, wrong channel key, ...)
but report an error and continue with the other given channel names.
Reported by Cahata -- thanks!
Alexander Barton [Mon, 2 Jan 2012 14:22:52 +0000 (15:22 +0100)]
IRC_JOIN(): Code cleanup
Alexander Barton [Mon, 2 Jan 2012 14:06:44 +0000 (15:06 +0100)]
ISON command: reply with correct upper-/lowercase nick names
Reported by Cahata -- thanks!
Alexander Barton [Mon, 2 Jan 2012 14:04:40 +0000 (15:04 +0100)]
IRC_ISON(): Code cleanup
Alexander Barton [Sun, 1 Jan 2012 23:56:31 +0000 (00:56 +0100)]
Remove unused "bool have_arg" from IRC_WHO()
This fixes:
irc-info.c: In function ‘IRC_WHO’:
irc-info:936:18: warning: variable ‘have_arg’ set but not used
Alexander Barton [Sun, 1 Jan 2012 22:14:28 +0000 (23:14 +0100)]
Update NEWS and ChangeLog for next ngIRCd release
Alexander Barton [Sun, 1 Jan 2012 16:39:07 +0000 (17:39 +0100)]
ngircd.conf.5: reword description of "Ports" variable
Alexander Barton [Sun, 1 Jan 2012 16:12:36 +0000 (17:12 +0100)]
New configuration option "PAMIsOptional"
When "PAMIsOptional" is set, clients not sending a password are still
allowed to connect: they won't become "identified" and keep the "~"
character prepended to their supplied user name.
Alexander Barton [Sat, 31 Dec 2011 17:06:17 +0000 (18:06 +0100)]
PAM: don't use global password buffer for conv struct
Use the pointer of the password of the client directly.
Eventually we can get rid of the global password again ...
Alexander Barton [Sat, 31 Dec 2011 17:04:58 +0000 (18:04 +0100)]
doc/Modes.txt: document channel mode "r"
And make clear, that user mode "r" and channel mode "r" are not set by
ngIRCd itself but by IRC services.
Alexander Barton [Fri, 30 Dec 2011 13:52:48 +0000 (14:52 +0100)]
Fixed handling of WHO commands
This fixes two bugs:
- "WHO <nick>" returned nothing at all if the user was "+i"
(reported by Cahata, thanks).
- "WHO <nick|nickmask>" returned channel names instead of "*"
when the user was member of a (visible) channel.
Clean up code and add documentation as well.
Alexander Barton [Fri, 30 Dec 2011 00:02:44 +0000 (01:02 +0100)]
Remove unused "time_t now" from Lists_Check()
This fixes:
lists.c: In function ‘Lists_Check’:
lists.c:330:9: warning: variable ‘now’ set but not used
Alexander Barton [Thu, 29 Dec 2011 23:50:27 +0000 (00:50 +0100)]
Fixed some spelling errors in documentation and code comments
Thanks to Christoph Biedl!
Alexander Barton [Thu, 29 Dec 2011 23:40:18 +0000 (00:40 +0100)]
contrib/Debian/control: Update and complete "Build-Depends"
Alexander Barton [Thu, 29 Dec 2011 23:36:26 +0000 (00:36 +0100)]
Update our Debian package descriptions with "official" ones
See Debian Bug #648241 for details.
Alexander Barton [Thu, 29 Dec 2011 23:32:11 +0000 (00:32 +0100)]
Fixed typo in two error messages
Thanks to Christoph Biedl!
Alexander Barton [Wed, 28 Dec 2011 14:07:24 +0000 (15:07 +0100)]
LUSERS reply: only count "visible" channels
Rename Channel_Count() to Channel_CountVisible() and only count channels
that are visible to the requesting client, so the existence of secret
channels is no longer revealed by using LUSERS.
Reported by Cahata -- thanks!
Alexander Barton [Wed, 28 Dec 2011 13:52:21 +0000 (14:52 +0100)]
IRC_Send_LUSERS(): Code cleanup
Alexander Barton [Wed, 28 Dec 2011 13:39:47 +0000 (14:39 +0100)]
Don't stop mode handling on unknown modes; skip it
Unknown user and channel modes no longer stop the mode parser, but are
simply ignored. Therefore modes after the unknown one are now handled.
This is how ircd2.10/ircd2.11/ircd-seven behave, at least.
Reported by Cahata -- thanks!
Alexander Barton [Sun, 25 Dec 2011 19:11:43 +0000 (20:11 +0100)]
IRC_xLINE(): output an error message for unexpected "lines"
This fixes:
irc-oper.c: In function ‘IRC_xLINE’:
irc-oper.c:429: warning: ‘class’ may be used uninitialized in this function
irc-oper.c:430: warning: ‘class_c’ may be used uninitialized in this function
Alexander Barton [Sun, 25 Dec 2011 19:01:28 +0000 (20:01 +0100)]
README: Update list of implemented commands
Alexander Barton [Sun, 25 Dec 2011 18:43:00 +0000 (19:43 +0100)]
Update list item, if it already exists
This updates the "validity" (timeout) as well as the "reason" text,
if given.
Alexander Barton [Sun, 25 Dec 2011 18:42:03 +0000 (19:42 +0100)]
Lists_CheckDupeMask(): return pointer to already existing item
The old behavior of returning true/false is compatible to this change,
so there are no other code changes required.
Alexander Barton [Sun, 25 Dec 2011 18:27:06 +0000 (19:27 +0100)]
Log better error messages when rejecting clients
Alexander Barton [Sun, 25 Dec 2011 18:12:40 +0000 (19:12 +0100)]
Synchronize G-Lines on server login
Alexander Barton [Sun, 25 Dec 2011 18:11:43 +0000 (19:11 +0100)]
Op_Check(): always accept commands from a remote server itself
Alexander Barton [Sun, 25 Dec 2011 18:11:07 +0000 (19:11 +0100)]
Class_GetList() now retuns a pointer to list_head structure
Alexander Barton [Sun, 25 Dec 2011 17:03:35 +0000 (18:03 +0100)]
Check G-Line and K-Line lists after authenticating clients
Alexander Barton [Sun, 25 Dec 2011 16:44:20 +0000 (17:44 +0100)]
New functions Lists_Expire() and Class_Expire()
GLINE and KLINE lists are cleared automatically now, not when they are
checked. So "STATS g" and "STATS k" no longer show expired entries :-)
Alexander Barton [Sun, 25 Dec 2011 15:57:36 +0000 (16:57 +0100)]
Implement IRC_xLINE(): handler for "GLINE" and "KLINE" commands
Alexander Barton [Sun, 25 Dec 2011 15:52:31 +0000 (16:52 +0100)]
Op_Check(): return client that initiated the request or NULL
The old behavior of returning true/false is compatible to this change,
so there are no other code changes required.
Alexander Barton [Sun, 25 Dec 2011 15:08:00 +0000 (16:08 +0100)]
irc-oper.c: code cleanup; more documentation
Alexander Barton [Sun, 25 Dec 2011 13:50:19 +0000 (14:50 +0100)]
Implement IRC "STATS g" and "STATS k" command
Alexander Barton [Sun, 25 Dec 2011 13:49:52 +0000 (14:49 +0100)]
New function Class_GetList()
Alexander Barton [Sun, 25 Dec 2011 13:48:13 +0000 (14:48 +0100)]
lists.{c|h}: code cleanup; more documentation
Alexander Barton [Sun, 25 Dec 2011 13:19:45 +0000 (14:19 +0100)]
List and class handling: add optional "reason" text
Adjust Lists_Add() and Class_AddMask() accordingly, implement
Lists_GetReason() and Lists_GetValidity().
Alexander Barton [Sat, 24 Dec 2011 13:24:07 +0000 (14:24 +0100)]
Add new class.{c|h} module to Xcode project
Alexander Barton [Sat, 24 Dec 2011 12:40:27 +0000 (13:40 +0100)]
Add new class.{c|h} to project
Implement Class_{AddMask|DeleteMask|IsMember}() functions.
Alexander Barton [Sat, 24 Dec 2011 12:34:25 +0000 (13:34 +0100)]
Lists: change "only once" property into "valid until"
The old "only once" true/false behavior is still supported, so there
are no other code changes required.