Fix 1.0.2 build break

Reviewed-by: Matt Caswell <matt@openssl.org>

GH364: Free memory on an error path

Part of RT 3997
Per Ben, just jump to common exit code.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit cc2829e6641092abed8360433dbe67e883fd1cc6)

Return error for unsupported modes.

PR#3974
PR#3975

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix memory leak if setup fails.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 891eac4604b5f05413e59602fae1f11136f4719a)

Conflicts:
crypto/cms/cms_enc.c

Err isn't always malloc failure.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit a187e08d856690b5c1da3184d0ff560d572f893b)

Conflicts:
crypto/cms/cms_smime.c

Fix "make test" seg fault with SCTP enabled

When config'd with "sctp" running "make test" causes a seg fault. This is
actually due to the way ssltest works - it dives under the covers and frees
up BIOs manually and so some BIOs are NULL when the SCTP code does not
expect it. The simplest fix is just to add some sanity checks to make sure
the BIOs aren't NULL before we use them.

This problem occurs in master and 1.0.2. The fix has also been applied to
1.0.1 to keep the code in sync.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit f75d5171be0b3b5419c8974133e1573cf976a8bb)

Fix missing return value checks in SCTP

There are some missing return value checks in the SCTP code. In master this
was causing a compilation failure when config'd with
"--strict-warnings sctp".

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d8e8590ed90eba6ef651d09d77befb14f980de2c)

Check for 0 modulus in BN_MONT_CTX_set

The function BN_MONT_CTX_set was assuming that the modulus was non-zero
and therefore that |mod->top| > 0. In an error situation that may not be
the case and could cause a seg fault.

This is a follow on from CVE-2015-1794.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix seg fault with 0 p val in SKE

If a client receives a ServerKeyExchange for an anon DH ciphersuite with the
value of p set to 0 then a seg fault can occur. This commits adds a test to
reject p, g and pub key parameters that have a 0 value (in accordance with
RFC 5246)

The security vulnerability only affects master and 1.0.2, but the fix is
additionally applied to 1.0.1 for additional confidence.

CVE-2015-1794

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

RT3998: fix X509_check_host.pod release to 1.0.2

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Ben Laurie <ben@openssl.org>
(cherry picked from commit 2bfbeb264573342bea475f6dbb5b4c7fec8fdb0a)

RT3990: Fix #include path.

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1125245997dac232a0c0867b6c858cda4e549c6d)

Fix warning when compiling with no-ec2m

EC_KEY_set_public_key_affine_coordinates was using some variables that only
apply if OPENSSL_NO_EC2M is not defined.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit 8d11b7c7ee84ad0aa243476088285d15b22c5470)

GH336: Return an exit code if report fails

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e36ce2d986a5edbd33d6d176fb95c8046fae9725)

Clear BN-mont values when free'ing it.

From a CloudFlare patch.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Various doc fixes from GH pull requests

Thanks, folks!
        348 Benjamin Kaduk
        317 Christian Brueffer
        254 Erik Tews
        253 Erik Tews
        219 Carl Mehner
        155 (ghost)
        95 mancha
        51 DominikNeubauer

(Manually picked from 59c554b36e39256ac2cfc34dca052453e10c6d9c)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

RT3959: Fix misleading comment

Manual cherry-pick from main branch, since the header file
moved in master.
Reviewed-by: Matt Caswell <matt@openssl.org>

use X9.31 keygen by default in FIPS mode

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix write failure handling in DTLS1.2

The DTLS code is supposed to drop packets if we try to write them out but
the underlying BIO write buffers are full. ssl3_write_pending() contains
an incorrect test for DTLS that controls this. The test only checks for
DTLS1 so DTLS1.2 does not correctly clear the internal OpenSSL buffer which
can later cause an assert to be hit. This commit changes the test to cover
all DTLS versions.

RT#3967

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 5e8b24dbfb98ed7c5b355cb6a959906a418e264b)

RT3774: double-free in DSA

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit fa4629b6a2518d202fd051f228c3d8770682b3be)

Tweak README about rt and bug reporting.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 932af1617e277904bcca6e47729a420bba39785b)

Fix SSL_set_session_ticket_ext when used with SSLv23_method

The function SSL_set_session_ticket_ext can be used to set custom session
ticket data passed in the initial ClientHello. This can be particularly
useful for EAP-FAST. However, when using SSLv23_method, the session does
not get created until the ServerHello has been received. The extension code
will only add the SessionTicket data to the ClientHello if a session already
exists. Therefore SSL_set_session_ticket_ext has no impact when used in
conjunction with SSLv23_method. The solution is to simply create the session
during creation of the ClientHello instead of waiting for the ServerHello.

This commit fixes the test failure introduced by the previous commit.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Add test for SSL_set_session_ticket_ext

The function SSL_set_session_ticket_ext sets the ticket data to be sent in
the ClientHello. This is useful for EAP-FAST. This commit adds a test to
ensure that when this function is called the expected ticket data actually
appears in the ClientHello.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

rsaz_exp.h: align license with the rest of the contribution

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f4ee22be03bb8318b1e0f00e116be231ba12fdef)

Fix author credit for e5c0bc6

Reviewed-by: Richard Levitte <levitte@openssl.org>

Revert "Missing perldoc markup around < literal"

This reverts commit e5c0bc6cc49a23b50a272801c4bd53639c25fca4.
Reviewed-by: Richard Levitte <levitte@openssl.org>

GH322: Fix typo in generated comment.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit ad282e638b6824325fb83ecf7cde2e7996f52b79)

Missing perldoc markup around < literal

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e5c0bc6cc49a23b50a272801c4bd53639c25fca4)

Conversion to UTF-8 where needed

This leaves behind files with names ending with '.iso-8859-1'.  These
should be safe to remove.  If something went wrong when re-encoding,
there will be some files with names ending with '.utf8' left behind.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Small script to re-encode files that need it to UTF-8

This requires 'iconv' and that 'file' can take the options '-b' and '-i'.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f608b4064d58ca4dfdfdfc921308b51cb96205e2)

Remove extra '; \' in apps/Makefile

Fixes GH#330

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit eeb97bce751296b2e04a92d00c0d0a792ba61834)

Conflicts:
apps/Makefile

Set numeric IDs for tar as well

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit da24e6f8a05ea657684094e04c1a54efa04c2962)

Stop using tardy

Instead of piping through tardy, and possibly suffering from bugs in certain
versions, use --transform, --owner and --group directly with GNU tar (we
already expect that tar variant).

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 27f98436b9a84b94fbdd8e32960504634ae44cc0)

Conflicts:
Makefile.org

correct example

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2fc52c912a79eefe8610984bac5eed3a2589ee85)

Exit on error in ecparam

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 99dcd88035330d59ab40b5bc0f551aca7020cd30)

Sort @sstacklst correctly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Prepare for 1.0.2e-dev

Reviewed-by: Stephen Henson <steve@openssl.org>

Prepare for 1.0.2d release

Reviewed-by: Stephen Henson <steve@openssl.org>

Update CHANGES and NEWS for the new release

Reviewed-by: Stephen Henson <steve@openssl.org>

Add documentation for some missing verify options

Fills in a couple of verify options that were lacking documentation.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 79a55b1f2796bf6471360e8b6ab131cdedca256e)

Conflicts:
doc/apps/verify.pod

Reject calls to X509_verify_cert that have not been reinitialised

The function X509_verify_cert checks the value of |ctx->chain| at the
beginning, and if it is NULL then it initialises it, along with the value
of ctx->untrusted. The normal way to use X509_verify_cert() is to first
call X509_STORE_CTX_init(); then set up various parameters etc; then call
X509_verify_cert(); then check the results; and finally call
X509_STORE_CTX_cleanup(). The initial call to X509_STORE_CTX_init() sets
|ctx->chain| to NULL. The only place in the OpenSSL codebase  where
|ctx->chain| is set to anything other than a non NULL value is in
X509_verify_cert itself. Therefore the only ways that |ctx->chain| could be
non NULL on entry to X509_verify_cert is if one of the following occurs:
1) An application calls X509_verify_cert() twice without re-initialising
in between.
2) An application reaches inside the X509_STORE_CTX structure and changes
the value of |ctx->chain| directly.

With regards to the second of these, we should discount this - it should
not be supported to allow this.

With regards to the first of these, the documentation is not exactly
crystal clear, but the implication is that you must call
X509_STORE_CTX_init() before each call to X509_verify_cert(). If you fail
to do this then, at best, the results would be undefined.

Calling X509_verify_cert() with |ctx->chain| set to a non NULL value is
likely to have unexpected results, and could be dangerous. This commit
changes the behaviour of X509_verify_cert() so that it causes an error if
|ctx->chain| is anything other than NULL (because this indicates that we
have not been initialised properly). It also clarifies the associated
documentation. This is a follow up commit to CVE-2015-1793.

Reviewed-by: Stephen Henson <steve@openssl.org>

Add test for CVE-2015-1793

This adds a test for CVE-2015-1793. This adds a new test file
verify_extra_test.c, which could form the basis for additional
verification tests.

Reviewed-by: Stephen Henson <steve@openssl.org>

Fix alternate chains certificate forgery issue

During certificate verfification, OpenSSL will attempt to find an
alternative certificate chain if the first attempt to build such a chain
fails. An error in the implementation of this logic can mean that an
attacker could cause certain checks on untrusted certificates to be
bypassed, such as the CA flag, enabling them to use a valid leaf
certificate to act as a CA and "issue" an invalid certificate.

This occurs where at least one cert is added to the first chain from the
trust store, but that chain still ends up being untrusted. In that case
ctx->last_untrusted is decremented in error.

Patch provided by the BoringSSL project.

CVE-2015-1793

Reviewed-by: Stephen Henson <steve@openssl.org>

Relax CCM tag check.

In CCM mode don't require a tag before initialising decrypt: this allows
the tag length to be set without requiring the tag.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 9cca7be11d62298b2af0722f94345012c86eaed4)

document -2 return value

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 5727582cf51e98e5e0faa435e7da2c8929533c0d)

Fix PSK handling.

The PSK identity hint should be stored in the SSL_SESSION structure
and not in the parent context (which will overwrite values used
by other SSL structures with the same SSL_CTX).

Use BUF_strndup when copying identity as it may not be null terminated.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Check for errors with SRP

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 5fced2395ddfb603a50fd1bd87411e603a59dc6f)

Don't output bogus errors in PKCS12_parse

PR#3923

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit ffbf304d4832bd51bb0618f8ca5b7c26647ee664)

Add docs for ssl verification parameter functions.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 77672802a665b26a44524a7a8091e56ee84bdf39)

GH297: Fix NAME section of SSL_CTX_use_serverinfo.pod

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>

RT3682: Avoid double-free on OCSP parse error

Found by Kurt Cancemi

(Manual cherry-pick of f8e427154bbc0c33f29fa7aad001b1b655e5995b)
Reviewed-by: Matt Caswell <matt@openssl.org>

RT3856: Fix memory leaks in test code

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 2d540402aac7a05af9c99b58864d53c0201a0b42)

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

Rearrange rsaz

A small rearrangement so the inclusion of rsaz_exp.h would be
unconditional, but what that header defines becomes conditional.

This solves the weirdness where rsaz_exp.h gets in and out of the
dependency list for bn_exp.c, depending on the present architecture.

Reviewed-by: Rich Salz <rsalz@openssl.org>

RT3907-fix

Typo in local variable name; introduced by previous fix.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit cc3f3fc2b1c94d65824ab8d69595b6d89b17cf8d)

RT3907: avoid "local" in testssl script

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 75ba5c58c6b3b3326a6c3198100830afa120e7c3)

RT3917: add cleanup on an error path

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 7fba8407cc72e09dbd8d768100617286b0740b03)

Cleanup mttest.c : because we no longer use stdio here, don't include it

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8ca96efd24b73f917837fdd45b1c22d7b8ff8cbd)

Add -ldl to the build of mttest.c

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d62c98c81c7b47b7b1878fd7e91e5fd33818faf0)

Cleanup mttest.c : do not try to output reference counts when threads are done

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 964626957f79e07ed97756527cdc7e84007c60c9)

Cleanup mttest.c : better error reporting when certs are missing

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 7a1789d254c561bd3024c971b5cfeeedd12d63f3)

Cleanup mttest.c : make ssl_method a pointer to const

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f4c73bfe0ab7a0e8f82fe2947c0f77fe3d98acab)

Conflicts:
crypto/threads/mttest.c

Cleanup mttest.c : more output changes

More fprintf()s and printf()s to turn into BIO calls.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Cleanup mttest.c : modernise output

Construct bio_err and bio_stdout from file handles instead of FILE
pointers, since the latter might not be implemented (when OPENSSL_NO_STDIO
is defined).
Convert all output to use BIO_printf.
Change lh_foo to lh_SSL_SESSION_foo.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit bb8abd6735e198de36c1eb9098a7f1516d156220)

Conflicts:
crypto/threads/mttest.c

Cleanup mttest.c : modernise the threads setup

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 5c78e1835285ce4acdc7cc4f4c06aa7d6661c9b4)

Conflicts:
crypto/threads/mttest.c

Cleanup mttest.c : remove MS_CALLBACK

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a3f9286556d6d78c1800caae97a9328afb2557e6)

RT1688: Add dependencies for parallel make

Backport to 1.0.1 and 1.0.2 to fix RT 3905

Reviewed-by: Richard Levitte <levitte@openssl.org>

typo: should be OPENSSL_free

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit bc9567cdc9a56b5c904e075e3b929076c1e7583c)

Make preprocessor error into real preprocessor error

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit b4f0d1a4a89b964dba80036a6348ca0a1913c526)

Remove one extraneous parenthesis

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 30cf91784bfde82622f79d87d17d20ce73329532)

Prepare for 1.0.2d-dev

Reviewed-by: Richard Levitte <levitte@openssl.org>

Prepare for 1.0.2c release

Reviewed-by: Richard Levitte <levitte@openssl.org>

Updated CHANGES and NEWS entries for new release

Reviewed-by: Richard Levitte <levitte@openssl.org>

Allow a zero length extension block

It is valid for an extension block to be present in a ClientHello, but to
be of zero length.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix ABI break with HMAC

Recent HMAC changes broke ABI compatibility due to a new field in HMAC_CTX.
This backs that change out, and does it a different way.

Thanks to Timo Teras for the concept.

Conflicts:
crypto/hmac/hmac.c

Reviewed-by: Richard Levitte <levitte@openssl.org>

Prepare for 1.0.2c-dev

Reviewed-by: Stephen Henson <steve@openssl.org>

Prepare for 1.0.2b release

Reviewed-by: Stephen Henson <steve@openssl.org>

make update

Reviewed-by: Stephen Henson <steve@openssl.org>

bn/bn_gf2m.c: avoid infinite loop wich malformed ECParamters.

CVE-2015-1788

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 4924b37ee01f71ae19c94a8934b80eeb2f677932)

Update CHANGES and NEWS

Updates to CHANGES and NEWS to take account of the latest security fixes.

Reviewed-by: Rich Salz <rsalz@openssl.org>

PKCS#7: Fix NULL dereference with missing EncryptedContent.

CVE-2015-1790

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix length checks in X509_cmp_time to avoid out-of-bounds reads.

Also tighten X509_cmp_time to reject more than three fractional
seconds in the time; and to reject trailing garbage after the offset.

CVE-2015-1789

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix infinite loop in CMS

Fix loop in do_free_upto if cmsbio is NULL: this will happen when attempting
to verify and a digest is not recognised. Reported by Johannes Bauer.

CVE-2015-1792

Reviewed-by: Matt Caswell <matt@openssl.org>

make update

Reviewed-by: Matt Caswell <matt@openssl.org>

Correction of make depend merge error

$(PROGS) was mistakenly removed, adding it back.

Reviewed-by: Matt Caswell <matt@openssl.org>

More ssl_session_dup fixes

Fix error handling in ssl_session_dup, as well as incorrect setting up of
the session ticket. Follow on from CVE-2015-1791.

Thanks to LibreSSL project for reporting these issues.

Conflicts:
ssl/ssl_sess.c

Reviewed-by: Tim Hudson <tjh@openssl.org>

e_aes_cbc_hmac_sha*.c: address linker warning about OPENSSL_ia32cap_P size mismatch.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit f0fa5c8306236ce742168d664d53b1551649a47b)

Only allow a temporary rsa key exchange when they key is larger than 512.

Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #838

Properly check certificate in case of export ciphers.

Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #838

gcm.c: address linker warning about OPENSSL_ia32cap_P size mismatch.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 75c4827dfe6f52ccd687a283e6108a88ba3b8ec4)

DTLS handshake message fragments musn't span packets

It should not be possible for DTLS message fragments to span multiple
packets. However previously if the message header fitted exactly into one
packet, and the fragment body was in the next packet then this would work.
Obviously this would fail if packets get re-ordered mid-flight.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix leak in HMAC error path

In the event of an error in the HMAC function, leaks can occur because the
HMAC_CTX does not get cleaned up.

Thanks to the BoringSSL project for reporting this issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e43a13c807e42688c72c4f3d001112bf0a110464)

EC_POINT_is_on_curve does not return a boolean

The function EC_POINT_is_on_curve does not return a boolean value.
It returns 1 if the point is on the curve, 0 if it is not, and -1
on error. Many usages within OpenSSL were incorrectly using this
function and therefore not correctly handling error conditions.

With thanks to the Open Crypto Audit Project for reporting this issue.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 68886be7e2cd395a759fcd41d2cede461b68843d)

Tighten extension handling

This adds additional checks to the processing of extensions in a ClientHello
to ensure that either no extensions are present, or if they are then they
take up the exact amount of space expected.

With thanks to the Open Crypto Audit Project for reporting this issue.

Reviewed-by: Stephen Henson <steve@openssl.org>
Conflicts:
ssl/t1_lib.c

Fix memory leaks in BIO_dup_chain()

This fixes a memory leak that can occur whilst duplicating a BIO chain if
the call to CRYPTO_dup_ex_data() fails. It also fixes a second memory leak
where if a failure occurs after successfully creating the first BIO in the
chain, then the beginning of the new chain was not freed.

With thanks to the Open Crypto Audit Project for reporting this issue.

Reviewed-by: Stephen Henson <steve@openssl.org>
Conflicts:
crypto/bio/bio_lib.c

Replace memset with OPENSSL_cleanse()

BUF_MEM_free() attempts to cleanse memory using memset immediately prior
to a free. This is at risk of being optimised away by the compiler, so
replace with a call to OPENSSL_cleanse() instead.

With thanks to the Open Crypto Audit Project for reporting this issue.

Reviewed-by: Stephen Henson <steve@openssl.org>

Fix Kerberos issue in ssl_session_dup

The fix for CVE-2015-1791 introduced an error in ssl_session_dup for
Kerberos.

Reviewed-by: Tim Hudson <tjh@openssl.org>

When making libcrypto from apps or test, make sure to include engines

For librypto to be complete, the stuff in both crypto/ and engines/
have to be built.  Doing 'make test' or 'make apps' from a clean
source tree failed to do so.
Corrected by using the new 'build_libcrypto' in the top Makefile.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit acaff3b797f50a0a0e17a0be45b7fafad962004e)

Add and rearrange building of libraries

There's a need for a target that will build all of libcrypto, so let's
add 'build_libcrypto' that does this.  For ortogonality, let's also
add 'build_libssl'.  Have both also depend on 'libcrypto.pc' and
'libssl.pc' so those get built together with the libraries.
This makes 'all' depend on fewer things directly.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 177b5f9c82e1152d6ce20a83556db629697fff65)

Conflicts:
Makefile.org

Explicitly mention PKCS5_PBKDF2_HMAC in EVP doc.

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 82c4d793181058de9fde5c9088fd400fdb7e01e3)

return correct NID for undefined object

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 0fb9990480919163cc375a2b6c0df1d8d901a77b)