[OPENMP] Codegen for 'firstprivate' clause in 'single' directive.
Emit the following code for 'single' directive with 'firtstprivate' clause:
if (@__kmpc_single()) {
<init for firstprivates>
@__kmpc_end_single();
}
@__kmpc_cancel_barrier(); // To avoid data race in firstprivate init
Differential Revision: http://reviews.llvm.org/D9223
[OPENMP] Codegen for 'firstprivate' clause in 'sections' directive.
If there are 2 or more sections in a 'section' directive the following code is generated:
<init for firstprivates>
@__kmpc_cancel_barrier();// To avoid data race in firstprivate init
@__kmpc_for_static_init_4();
<BODY for sections directive>
@__kmpc_for_static_fini()
If there is only one section, the following code is generated:
if (@__kmpc_single()) {
<init for firstprivates>
@__kmpc_end_single();
}
@__kmpc_cancel_barrier(); // To avoid data race in firstprivate init
Differential Revision: http://reviews.llvm.org/D9214
InstrProf: Stop using RegionCounter outside of CodeGenPGO (NFC)
The RegionCounter type does a lot of legwork, but most of it is only
meaningful within the implementation of CodeGenPGO. The uses elsewhere
in CodeGen generally just want to increment or read counters, so do
that directly.
Richard Smith [Thu, 23 Apr 2015 18:18:26 +0000 (18:18 +0000)]
[modules] Determine the set of macros exported by a submodule at the end of that submodule.
Previously we'd defer this determination until writing the AST, which doesn't
allow us to use this information when building other submodules of the same
module. This change also allows us to use a uniform mechanism for writing
module macro records, independent of whether they are local or imported.
In r235553, Clang started emitting lifetime markers more often. This
caused false negative in MSan, because MSan only poisons all allocas
once at function entry. Eventually, MSan should poison allocas at
lifetime start and probably also lifetime end, but until then, let's not
emit markers that aren't going to be useful.
Adds codegen for 'atomic capture' constructs with the following forms of expressions/statements:
v = x binop= expr;
v = x++;
v = ++x;
v = x--;
v = --x;
v = x = x binop expr;
v = x = expr binop x;
{v = x; x = binop= expr;}
{v = x; x++;}
{v = x; ++x;}
{v = x; x--;}
{v = x; --x;}
{x = x binop expr; v = x;}
{x binop= expr; v = x;}
{x++; v = x;}
{++x; v = x;}
{x--; v = x;}
{--x; v = x;}
{x = x binop expr; v = x;}
{x = expr binop x; v = x;}
{v = x; x = expr;}
If x and expr are integer and binop is associative or x is a LHS in a RHS of the assignment expression, and atomics are allowed for type of x on the target platform atomicrmw instruction is emitted.
Otherwise compare-and-swap sequence is emitted.
Update of 'v' is not required to be be atomic with respect to the read or write of the 'x'.
David Majnemer [Thu, 23 Apr 2015 05:21:20 +0000 (05:21 +0000)]
[MS ABI] Treat ConstantArrayType like IncompleteArrayType in args
Type backreferences for arguments use the DecayedType's original type.
Because of this, arguments with the same canonical type with the same
mangling would not backreference each other if one was a
ConstantArrayType while the other was an IncompleteArrayType. Solve
this by canonicalizing the ConstantArrayType to a suitable
IncompleteArrayType.
Unify the way we report overflow in increment/decrement operator.
Summary:
Make sure signed overflow in "x--" is checked with
llvm.ssub.with.overflow intrinsic and is reported as:
"-2147483648 - 1 cannot be represented in type 'int'"
instead of:
"-2147483648 + -1 cannot be represented in type 'int'"
, like we do for unsigned overflow.
Test Plan: clang + compiler-rt regression test suite
InstrProf: Fix a shadowing error that would break length of profile names
We try to use the member variable "FuncName" here, but we've also used
that name as a parameter. This ends with us getting the length of the
function name wrong when we generate the coverage data.
[WinEH] Don't emit an exceptional cleanup for llvm.eh.endcatch
These extra endcatch markers aren't helping identify regions to outline,
so let's get rid of them. LLVM outlines (more or less) from begincatch
to endcatch. Any unwind edge from an enclosed invoke is a transition to
a new exception handler, which has it's own outlining markers.
David Majnemer [Wed, 22 Apr 2015 21:38:15 +0000 (21:38 +0000)]
Revert "Revert r234581, it might have caused a few miscompiles in Chromium."
This reverts commit r234700. It turns out that the lifetime markers
were not the cause of Chromium failing but a bug which was uncovered by
optimizations exposed by the markers.
[OPENMP] Codegen for 'if' clause in 'task' directive.
If condition evaluates to true, the code executes task by calling @__kmpc_omp_task() runtime function.
If condition evaluates to false, the code executes serial version of the code by executing the following code:
call void @__kmpc_omp_task_begin_if0(<loc>, <threadid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
proxy_task_entry(<gtid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
call void @__kmpc_omp_task_complete_if0(<loc>, <threadid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
Also it checks if the condition is constant and if it is constant it evaluates its value and then generates either parallel version of the code (if the condition evaluates to true), or the serial version of the code (if the condition evaluates to false).
Differential Revision: http://reviews.llvm.org/D9143
[OPENMP] Codegen for 'private' clause in 'for' directive.
This patch generates helper variables which used as a private copies of the corresponding original variables inside an OpenMP 'for' directive. These generated variables are initialized by default (with the default constructor, if any). In OpenMP region references to original variables are replaced by the references to these private helper variables.
Differential Revision: http://reviews.llvm.org/D9106
[OPENMP] Fix use of unsigned counters in loops with zero trip count.
Patch fixes bugs in codegen for loops with unsigned counters and zero trip count. Previously preconditions for all loops were built using logic (Upper - Lower) > 0. But if the loop is a loop with zero trip count, then Upper - Lower is < 0 only for signed integer, for unsigned we're running into an underflow situation.
In this patch we're using original Lower<Upper condition to check that loop body can be executed at least once. Also this allows to skip code generation for loops, if it is known that preconditions for the loop are always false.
Differential Revision: http://reviews.llvm.org/D9103
__kmpc_ordered(ident_t *, gtid);
<associated statement>;
__kmpc_end_ordered(ident_t *, gtid);
Also for 'for' directives with the dynamic scheduling and an 'ordered' clause added a call to '__kmpc_dispatch_fini_(4|8)[u]()' function after increment expression for loop control variable:
Hans Wennborg [Wed, 22 Apr 2015 04:05:17 +0000 (04:05 +0000)]
Don't dllimport/export class members with internal linkage (PR23308)
For example, a function taking a parameter with internal linkage will
itself have internal linkage since it cannot be called outside the
translation unit.
Richard Smith [Wed, 22 Apr 2015 00:26:11 +0000 (00:26 +0000)]
[modules] Build a DAG of module macros for each identifier.
This graph will be used to determine the current set of active macros. This is
foundation work for getting macro visibility correct across submodules of the
current module. No functionality change for now.
[cuda] Allow using integral non-type template parameters as launch_bounds attribute arguments.
- Changed CUDALaunchBounds arguments from integers to Expr* so they can
be saved in AST for instantiation.
- Added support for template instantiation of launch_bounds attrubute.
- Moved evaluation of launch_bounds arguments to NVPTXTargetCodeGenInfo::
SetTargetAttributes() where it can be done after template instantiation.
- Added a warning on negative launch_bounds arguments.
- Amended test cases.
Added cuda_builtin_vars.h which implements built-in CUDA variables
using __declattr(property).
Fields of built-in variables (except for warpSize) are implemented
using __declattr(property) which replaces read/write of a member field
with a call to a getter/setter member function, in this case with
appropriate NVPTX builtin.
Added a test case to check diagnostics on attempt to construct or
improperly access a built-in variable.
Richard Smith [Tue, 21 Apr 2015 21:46:32 +0000 (21:46 +0000)]
[modules] Move list of exported module macros from IdentifierInfo lookup table to separate storage, adjacent to the macro directive history.
This is substantially simpler, provides better space usage accounting in bcanalyzer,
and gives a more compact representation. No functionality change intended.
DebugInfo: Prepare for removal of DIArray and DITypeArray typedefs
An upcoming LLVM commit will remove the `DIArray` and `DITypeArray`
typedefs that shadow `DebugNodeArray` and `MDTypeRefArray`,
respectively. Use those types directly.
Added cuda_builtin_vars.h which implements built-in CUDA variables
using __declattr(property).
Fields of built-in variables (except for warpSize) are implemented
using __declattr(property) which replaces read/write of a member field
with a call to a getter/setter member function, in this case with
appropriate NVPTX builtin.
Added a test case to check diagnostics on attempt to construct or
improperly access a built-in variable.
Implement target-specific __attribute__((aligned)) value
The GCC construct __attribute__((aligned)) is defined to set alignment
to "the default alignment for the target architecture" according to
the GCC documentation:
The default alignment is sufficient for all scalar types, but may not be
enough for all vector types on a target that supports vector operations.
The default alignment is fixed for a particular target ABI.
clang currently hard-coded an alignment of 16 bytes for that construct,
which is correct on some platforms (including X86), but wrong on others
(including SystemZ). Since this value is ABI-relevant, it is important
to get correct for compatibility purposes.
This patch adds a new TargetInfo member "DefaultAlignForAttributeAligned"
that targets can set to the appropriate default __attribute__((aligned))
value.
Note that I'm deliberately *not* using the existing "SuitableAlign"
value, which is used to set the pre-defined macro __BIGGEST_ALIGNMENT__,
since those two values may not be the same on all platforms. In fact,
on X86, __attribute__((aligned)) always uses 16-byte alignment, while
__BIGGEST_ALIGNMENT__ may be larger if AVX-2 or AVX-512 are supported.
(This is actually not yet correctly implemented in clang either.)
The patch provides a value for DefaultAlignForAttributeAligned only for
SystemZ, and leaves the default for all other targets at 16, which means
no visible change in behavior on all other targets. (The value is still
wrong for some other targets, but I'd prefer to leave it to the target
maintainers for those platforms to fix.)
Code in CodeGenModule::GetOrCreateLLVMGlobal that sets up GlobalValue
object for LLVM external symbols has this comment:
// FIXME: This code is overly simple and should be merged with other global
// handling.
One part does seems to be "overly simple" currently is that this code
never sets any alignment info on the GlobalValue, so that the emitted
IR does not have any align attribute on external globals. This can
lead to unnecessarily inefficient code generation.
This patch adds a GV->setAlignment call to set alignment info.
SystemZ prefers to align all global variables to two bytes, which is
implemented by setting the TargetInfo member MinGlobalAlign.
However, for compatibility with existing compilers this should *not*
change the ABI alignment value as retrieved via __alignof__, which
it currently does.
This patch fixes the issue by having ASTContext::getDeclAlign ignore
the MinGlobalAlign setting in the ForAlignof case.
Since SystemZ is the only platform setting MinGlobalAlign, this should
cause no change for any other target.
DebugInfo: Prepare for deletion of subclasses of DIType
Subclasses of (the already deleted) `DIType` will be deleted by an
upcoming LLVM commit. Remove references.
While `DICompositeType` wraps `MDCompositeTypeBase` and `DIDerivedType`
wraps `MDDerivedTypeBase`, most uses of each really meant the more
specific `MDCompositeType` and `MDDerivedType`. I updated accordingly.
Put statement expression decls in the enclosing code DeclContext
We already check that statement expressions are in a function or block,
but we didn't do anything with that information. Now we use that
DeclContext for the duration of the statement expression. Otherwise,
we'd treat statement expression locals as static data members and go
into the weeds.
David Majnemer [Sun, 19 Apr 2015 07:53:29 +0000 (07:53 +0000)]
[MS ABI] Correctly associate align attrs before the class-key
__declspec(align(...)) is unlike all other attributes in that it is not
applied to a variable if it appears before the class-key. If the
tag in question isn't part of a variable declaration, it is not ignored.
Instead, the alignment attribute is applied to the tag.
Pete Cooper [Fri, 17 Apr 2015 22:16:24 +0000 (22:16 +0000)]
Change AArch64 i128 returns to use [2 x i64] when possible.
Something like { void*, void * } would be passed to a function as a [2 x i64], but returned as an i128. This patch unifies the 2 behaviours so that we also return it as a [2 x i64].
This is better for the quality of the IR, and the size of the final LLVM binary as we tend to want to insert/extract values from these types and do so with the insert/extract instructions is less IR than shifting, truncating, and or'ing values.
Will Wilson [Fri, 17 Apr 2015 12:43:57 +0000 (12:43 +0000)]
[MSVC] Mimic MSVC whitespace collapse for incompatible token pasting
In public MS headers for XAudio, clang would fail to generate a valid UUID due to the UUID components being combined with the '-' UUID separators. Clang would attempting to recover but would preserve the leading whitespace from the tokens after each failed paste leading to spaces creeping into the UUID and causing an error in the __declspace(uuid()) parsing.
Reference: Microsoft DirectX SDK (June 2010)\Include\XAudio2.h(51)
Follow-up to r235046: selectany only causes a definition if it's not inherited.
(For example needed to parse system header inputscope.h, which first has
an extern "C" selectany IID and then later an extern "C" declaration of that
same IID.)
Move fixit for const init from note to diag, weaken to warning in MS mode.
r235046 turned "extern __declspec(selectany) int a;" from a declaration into
a definition to fix PR23242 (required for compatibility with mc.exe output).
However, this broke parsing Windows headers: A d3d11 headers contain something
like
This is now a definition, and const objects either need an explicit default
ctor or an initializer so this errors out with
d3d11.h(1065,48) :
error: default initialization of an object of const type
'const CD3D11_DEFAULT' without a user-provided default constructor
(cl.exe just doesn't implement this rule, independent of selectany.)
To work around this, weaken this error into a warning for selectany decls
in microsoft mode, and recover with zero-initialization.
Doing this is a bit hairy since it adds a fixit on an error emitted
by InitializationSequence – this means it needs to build a correct AST, which
in turn means InitializationSequence::Failed() cannot return true when this
fixit is applied. As a workaround, the patch adds a fixit member to
InitializationSequence, and InitializationSequence::Perform() prints the
diagnostic if the fixit member is set right after its call to Diagnose.
That function is usually called when InitializationSequences are used –
InitListChecker::PerformEmptyInit() doesn't call it, but the InitListChecker
case never performs default-initialization, so this is technically OK.
This is the alternative, original fix for PR20208 that got reviewed in the
thread "[patch] Improve diagnostic on default-initializing const variables
(PR20208)". This change basically reverts r213725, adds the original fix for
PR20208, and makes the error a warning in Microsoft mode.
David Blaikie [Fri, 17 Apr 2015 00:19:34 +0000 (00:19 +0000)]
Improve const-ness
This allows callers to pass a char ** (such as the one coming from the
standard decreed main declaration - even though everyone usually puts
const on that themselves).
[Objective-C Sema] patch to introduce IndependentClass
attribute to be placed on Objective-C pointer typedef
to make them strong enough so on their "new" method
family no attempt is made to override these
types. rdar://20255473
Add support for AArch64 v8.1 architecture. Briefly it is described on http://community.arm.com/groups/processors/blog/2014/12/02/the-armv8-a-architecture-and-its-ongoing-development
[OPENMP] Fix for checking of data-sharing attributes for canonical var decls only.
Currently checks for active data-sharing attributes for variables are performed for found var decls. Instead these checks must be performed for canonical decls of these variables to avoid possible troubles with with the differently qualified re-declarations of the same variable, for example:
namespace A { int x; }
namespace B { using A::x; }
Both A::x and B::x actually reference the same object A::x and this fact must be taken into account during data-sharing attributes analysis.
Daniel Jasper [Thu, 16 Apr 2015 08:26:37 +0000 (08:26 +0000)]
clang-format: add an option for fallback style in vimrc
With this patch, clang-format.py will search and use existing .clang-format
file if there is one and fallback to the specific format style if
not. It should cover the projects which don't have .clang-format
files in their source. As the option fallback-style is available in
clang 3.5 or later, it is safe to use.
Patch by "Chilledheart" (http://reviews.llvm.org/D8489).
Daniel Jasper [Thu, 16 Apr 2015 07:02:19 +0000 (07:02 +0000)]
clang-format: Undo r214508. It was essentially always removing the
space where we already had the flag ObjCSpaceBeforeProtocolList to
control it. I don't know what I was thinking.
[OPENMP] Codegen for 'copyin' clause in 'parallel' directive.
Emits the following code for the clause at the beginning of the outlined function for implicit threads:
if (<not a master thread>) {
...
<thread local copy of var> = <master thread local copy of var>;
...
}
<sync point>;
Checking for a non-master thread is performed by comparing of the address of the thread local variable with the address of the master's variable. Master thread always uses original variables, so you always know the address of the variable in the master thread.
Differential Revision: http://reviews.llvm.org/D9026
projects / clang / log