Ned Bass [Tue, 8 Aug 2017 15:41:31 +0000 (08:41 -0700)]
Add debug log entries for failed receive records
Log contents of a receive record if an error occurs while writing
it out to the pool. This may help determine the cause when backup
streams are rejected as invalid.
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6465
When performing concurrent object allocations using the new
multi-threaded allocator and large dnodes it's possible to
allocate overlapping large dnodes.
This case should have been handled by detecting an error
returned by dnode_hold_impl(). But that logic only checked
the returned dnp was not-NULL, and the dnp variable was not
reset to NULL when retrying. Resolve this issue by properly
checking the return value of dnode_hold_impl().
Additionally, it was possible that dnode_hold_impl() would
misreport a dnode as free when it was in fact in use. This
could occurs for two reasons:
* The per-slot zrl_lock must be held over the entire critical
section which includes the alloc/free until the new dnode
is assigned to children_dnodes. Additionally, all of the
zrl_lock's in the range must be held to protect moving
dnodes.
* The dn->dn_ot_type cannot be solely relied upon to check
the type. When allocating a new dnode its type will be
DMU_OT_NONE after dnode_create(). Only latter when
dnode_allocate() is called will it transition to the new
type. This means there's a window when allocating where
it can mistaken for a free dnode.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6414
Closes #6439
Sen Haerens [Thu, 3 Aug 2017 16:56:15 +0000 (18:56 +0200)]
Fix zpool events scripted mode tab separator
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Sen Haerens <sen@senhaerens.be>
Closes #6444
Closes #6445
rsend tests in the test suite frequently create and
destroy datasets. It is possible for zfs destroy to
return an error code indicating the dataset is busy.
Simply use a log_must_busy in these cases to retry
destroying those datasets. Other fixes to rsend test
cases to avoid unmounting and remounting filesystems
and some cleanup.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6418
Ned Bass [Thu, 3 Aug 2017 04:16:12 +0000 (21:16 -0700)]
Use SET_ERROR for constant non-zero return codes
Update many return and assignment statements to follow the convention
of using the SET_ERROR macro when returning a hard-coded non-zero
value from a function. This aids debugging by recording the error
codes in the debug log.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6441
Tony Hutter [Wed, 2 Aug 2017 16:08:38 +0000 (09:08 -0700)]
Only record zio->io_delay on reads and writes
While investigating https://github.com/zfsonlinux/zfs/issues/6425 I
noticed that ioctl ZIOs were not setting zio->io_delay correctly. They
would set the start time in zio_vdev_io_start(), but never set the end
time in zio_vdev_io_done(), since ioctls skip it and go straight to
zio_done(). This was causing spurious "delayed IO" events to appear,
which would eventually get rate-limited and displayed as
"Missed events" messages in zed.
To get around the problem, this patch only sets zio->io_delay for read
and write ZIOs, since that's all we care about anyway.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6425
Closes #6440
At import time spa_import() calls zvol_create_minors() directly: with
the current implementation we have no way to avoid device node
creation when volmode=none.
Fix this by enforcing volmode=none directly in zvol_alloc().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6426
Test case zfs_send_007_pos regularly is killed
by test-runner during zfs-tests on buildbot. Disable
it for now until further investigation can be done.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6422
If we are in the middle of an incremental 'zfs receive', the child
.../%recv will exist. If we run 'zfs promote' .../%recv, it will "work",
but then zfs gets confused about the status of the new dataset.
Attempting to do this promote should be an error.
Similarly renaming .../%recv datasets should not be allowed.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #4843
Closes #6339
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #6409
Closes #6410
Ned Bass [Wed, 26 Jul 2017 06:09:48 +0000 (23:09 -0700)]
Add line info and SET_ERROR() to ZFS debug log
Redefine the SET_ERROR macro in terms of __dprintf() so the error
return codes get logged as both tracepoint events (if tracepoints are
enabled) and as ZFS debug log entries. This also allows us to use
the same definition of SET_ERROR() in kernel and user space.
Define a new debug flag ZFS_DEBUG_SET_ERROR=512 that may be bitwise
or'd into zfs_flags. Setting this flag enables both dprintf() and
SET_ERROR() messages in the debug log. That is, setting
ZFS_DEBUG_SET_ERROR and ZFS_DEBUG_DPRINTF|ZFS_DEBUG_SET_ERROR are
equivalent (this was done for sake of simplicity). Leaving
ZFS_DEBUG_SET_ERROR unset suppresses the SET_ERROR() messages which
helps avoid cluttering up the logs.
Remove the zfs_set_error_class tracepoints event class since
SET_ERROR() now uses __dprintf(). This sacrifices a bit of
granularity when selecting individual tracepoint events to enable but
it makes the code simpler.
Include file, function, and line number information in debug log
entries. The information is now added to the message buffer in
__dprintf() and as a result the zfs_dprintf_class tracepoints event
class was changed from a 4 parameter interface to a single parameter.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6400
Brian Behlendorf [Wed, 26 Jul 2017 01:57:00 +0000 (18:57 -0700)]
Fix zpool-features.5 indentation
The userobj_accounting feature described in the zpool-features.5
man page was incorrectly indented. Fix it.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6402
Ned Bass [Wed, 26 Jul 2017 01:52:40 +0000 (18:52 -0700)]
Some additional send stream validity checking
Check in the DMU whether an object record in a send stream being
received contains an unsupported dnode slot count, and return an
error if it does. Failure to catch an unsupported dnode slot count
would result in a panic when the SPA attempts to increment the
reference count for the large_dnode feature and the pool has the
feature disabled. This is not normally an issue for a well-formed
send stream which would have the DMU_BACKUP_FEATURE_LARGE_DNODE flag
set if it contains large dnodes, so it will be rejected as
unsupported if the required feature is disabled. This change adds a
missing object record field validation.
Add missing stream feature flag checks in
dmu_recv_resume_begin_check().
Consolidate repetitive comment blocks in dmu_recv_begin_check().
Update zstreamdump to print the dnode slot count (dn_slots) for an
object record when running in verbose mode.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6396
Brian Behlendorf [Tue, 25 Jul 2017 19:20:52 +0000 (12:20 -0700)]
Fix 'zpool clear' on suspended pools
'zpool clear' should be able to resume I/O on suspended, but otherwise
healthy, pools.
4a283c7 accidentally introduced a new code path where we call
txg_wait_synced() on the suspended pool before we had the chance to
resume I/O via zio_resume(): this results in the 'zpool clear'
command hanging indefinitely, waiting for a TXG that cannot be synced.
Fix this by avoiding the call to txg_wait_synced().
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6399
The previous autoconf test for the presence of super_setup_bdi_name()
uses an invocation with an incorrect type signature, producing a
warning by the compiler when the test is run. This gets elevated to an
error when compiling with -Werror=format-security, causing autoconf to
falsely infer super_setup_bdi_name() is not present. This updates the
testing code to match the invocation used in
include/linux/vfs_compat.h.
Olaf Faaland [Sat, 15 Jul 2017 01:15:00 +0000 (18:15 -0700)]
Report MMP_STATE_NO_HOSTID immediately
There is no need to perform the activity check before detecting that the
user must set the system hostid, because the pool's multihost property
is on, but spa_get_hostid() returned 0. The initial call to
vdev_uberblock_load() provided the information required.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6388
Olaf Faaland [Fri, 21 Jul 2017 00:54:26 +0000 (17:54 -0700)]
Add callback for zfs_multihost_interval
Add a callback to wake all running mmp threads when
zfs_multihost_interval is changed.
This is necessary when the interval is changed from a very large value
to a significantly lower one, while pools are imported that have the
multihost property enabled.
Without this commit, the mmp thread does not wake up and detect the new
interval until after it has waited the old multihost interval time. A
user monitoring mmp writes via the provided kstat would be led to
believe that the changed setting did not work.
Added a test in the ZTS under mmp to verify the new functionality is
working.
Added a test to ztest which starts and stops mmp threads, and calls into
the code to signal sleeping mmp threads, to test for deadlocks or
similar locking issues.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6387
Olaf Faaland [Fri, 14 Jul 2017 23:32:55 +0000 (16:32 -0700)]
Skip activity check for zhack RO import
"zhack feature stat" performs a read-only import, so the MMP activity
check is not necessary.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6388
Closes #6389
Olaf Faaland [Wed, 19 Jul 2017 01:11:08 +0000 (18:11 -0700)]
Add zgenhostid utility script
Turning the multihost property on requires that a hostid be set to allow
ZFS to determine when a foreign system is attemping to import a pool.
The error message instructing the user to set a hostid refers to
genhostid(1).
Genhostid(1) is not available on SUSE Linux. This commit adds a script
modeled after genhostid(1) for those users.
Zgenhostid checks for an /etc/hostid file; if it does not exist, it
creates one and stores a value. If the user has provided a hostid as an
argument, that value is used. Otherwise, a random hostid is generated
and stored.
This differs from the CENTOS 6/7 versions of genhostid, which overwrite
the /etc/hostid file even though their manpages state otherwise.
A man page for zgenhostid is added. The one for genhostid is in (1), but
I put zgenhostid in (8) because I believe it's more appropriate.
The mmp tests are modified to use zgenhostid to set the hostid instead
of using the spl_hostid module parameter. zgenhostid will not replace
an existing /etc/hostid file, so new mmp_clear_hostid calls are
required.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6358
Closes #6379
Olaf Faaland [Mon, 24 Jul 2017 15:48:28 +0000 (08:48 -0700)]
Release SCL_STATE in map_write_done()
The config lock must be held for the duration of the MMP write.
Since the I/Os are executed via map_nowait(), the done function
is the only place where we know the write has completed.
Since SCL_STATE is taken as reader, overlapping I/Os do not
create a deadlock. The refcount is simply increased when new
I/Os are queued and decreased when I/Os complete.
Test case added which exercises the probe IO call path to
verify the fix and prevent a regression.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6394
Olaf Faaland [Tue, 18 Jul 2017 18:43:55 +0000 (11:43 -0700)]
Revert Fix vdev_probe() call wrt SCL_STATE_ALL
This reverts commit cc9c6bc, which has been causing intermittent
test failures on buildbot. A correct fix for this locking issue
has been applied in a separate patch.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
In zed event test cases, a brief delay was introduced
to allow for events to make it to the zed log. On at least
one buildbot builder, the 1 second delay is not long enough.
Therefore, increasing the delay should ensure the zed has
more than enough time to write to its log.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6395
If we're creating a pool with version >= SPA_VERSION_DSL_SCRUB (v11)
we need to account for additional space needed by the origin dataset
which will also be snapshotted: "poolname"+"/"+"$ORIGIN"+"@"+"$ORIGIN".
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6374
When replacing a disk with non-wholedisk spare, we shouldn't zero_label
it. The wholedisk case already skip it. In fact, zero_label function
will fail saying device busy because it's already opened exclusively,
but since there's no error checking, the replace command will succeed,
causing great confusion.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #6369
zpool iostat/status -c is supposed to be restricted
by its search path, but currently isn't. To prevent
arbitrary scripts from being executed, disallow '/'
from commands.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6353
Closes #6359
Olaf Faaland [Mon, 24 Jul 2017 18:22:10 +0000 (11:22 -0700)]
Use correct macro for hz in mmp.c
Commit 379ca9c Multi-modifier protection (MMP) used HZ to convert
nanoseconds to ticks for use with cv_timedwait() and ddi_get_lbolt().
The correct macro is hz, which is defined within the SPL for kernel
space, and within zfs_context.h for user space.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6357
Closes #6360
CID 165755: Division or modulo by zero (DIVIDE_BY_ZERO)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6352
Use log_must_busy when destroying the snapshot
and dataset during cleanup in zfs_mount_001_neg.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6382
This change allows mountpoint_003_pos and send-c_props
to run on Linux kernels that do not support mandatory
locking. Linux kernel versions greater than or equal to
4.4 no longer support mandatory locking and the test
suite will now account for that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6346
Closes #6347
Closes #6362
Tony Hutter [Mon, 24 Jul 2017 17:58:14 +0000 (10:58 -0700)]
Add new fsck return code to zvol_misc_002_pos
zvol_misc_002_pos was failing on Fedora 26 because its newer version
of fsck was returning a different code than previous versions. The
new fsck error code is valid and is been added to the test in this
patch.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6350
OpenZFS 8491 - uberblock on-disk padding to reserve space for smoothly merging zpool checkpoint & MMP in ZFS
The zpool checkpoint feature in DxOS added a new field in the uberblock.
The Multi-Modifier Protection Pull Request from ZoL adds three new fields
in the uberblock (Reference: https://github.com/zfsonlinux/zfs/pull/6279).
As these two changes come from two different sources and once upstreamed
and deployed will introduce an incompatibility with each other we want
to upstream a change that will reserve the padding for both of them so
integration goes smoothly and everyone gets both features.
Porting Notes: Preserved MMP comments in uberblock struct.
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Olaf Faaland <faaland1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8491
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d84fa5f
Closes #6390
Ned Bass [Fri, 21 Jul 2017 00:04:35 +0000 (17:04 -0700)]
Minor fixes in zpool iostat -c documentation (#6370)
- Use nested [] notation to denote optional script list elements
- Fix space before comma after smarctl(8)
- Fix typo and formatting error in reference to -v option
- Fix spelling errors
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6370
George Melikov [Fri, 14 Jul 2017 16:34:35 +0000 (19:34 +0300)]
Fix coverity defects: CID 165757
CID 165757: Control flow issues (MISSING_BREAK)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #6348
Brian Behlendorf [Wed, 12 Jul 2017 00:35:34 +0000 (20:35 -0400)]
Fix vdev_probe() call outside SCL_STATE_ALL lock
When an IO fails then zio_vdev_io_done() can call vdev_probe()
to determine the health of the vdev. This is safe as long as
the original zio was submitted with zio_wait() and holds the
SCL_STATE_ALL lock over the operation.
If zio_no_wait() was used then the done callback will submit
the probe IO outside the SCL_STATE_ALL lock and hit this
ASSERT in zio_create()
Resolve the issue by only allowing vdev_probe() to be called
when there's a waiter indicating the caller is using zio_wait().
This assumes that caller is still holding SCL_STATE_ALL.
This issue isn't MMP specific but was surfaced when testing.
Without this patch it can be reproduced by running:
zpool set multihost on <pool>
zinject -d <vdev> -e io -T write -f 50 <pool> -L uber
Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com>
Closes #745
Closes #6279
Olaf Faaland [Sat, 8 Jul 2017 03:20:35 +0000 (20:20 -0700)]
Multi-modifier protection (MMP)
Add multihost=on|off pool property to control MMP. When enabled
a new thread writes uberblocks to the last slot in each label, at a
set frequency, to indicate to other hosts the pool is actively imported.
These uberblocks are the last synced uberblock with an updated
timestamp. Property defaults to off.
During tryimport, find the "best" uberblock (newest txg and timestamp)
repeatedly, checking for change in the found uberblock. Include the
results of the activity test in the config returned by tryimport.
These results are reported to user in "zpool import".
Allow the user to control the period between MMP writes, and the
duration of the activity test on import, via a new module parameter
zfs_multihost_interval. The period is specified in milliseconds. The
activity test duration is calculated from this value, and from the
mmp_delay in the "best" uberblock found initially.
Add a kstat interface to export statistics about Multiple Modifier
Protection (MMP) updates. Include the last synced txg number, the
timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV
label that received the last MMP update, and the VDEV path. Abbreviated
output below.
Add a new tunable zfs_multihost_history to specify the number of MMP
updates to store history for. By default it is set to zero meaning that
no MMP statistics are stored.
When using ztest to generate activity, for automated tests of the MMP
function, some test functions interfere with the test. For example, the
pool is exported to run zdb and then imported again. Add a new ztest
function, "-M", to alter ztest behavior to prevent this.
Add new tests to verify the new functionality. Tests provided by
Giuseppe Di Natale.
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #745
Closes #6279
Olaf Faaland [Thu, 25 May 2017 20:32:06 +0000 (13:32 -0700)]
Make hostid consistent in user and kernel space
If no spl_hostid was set, and no /etc/hostid file existed, the user
and kernel would have different values for the hostid.
The kernel's would be 0. User space's would depend on the libc
implementation. On systems with glibc, it would be a generated value,
probably the first 4 bytes of an IP address (see man 3 gethostid and
comments above hostid_read in SPL for details).
This then causes the hostid stored in the labels and in the pool
config not to match the hostid userspace obtains from
get_system_hostid().
Since the kernel has no way to know the libc's generated hostid value,
it serves no purpose for ZFS to use the value.
This patch changes user space's get_system_hostid() to conform to the
kernel's method, first checking for the spl_hostid via sysfs, and then
reading from /etc/hostid directly.
It does not look up spl_hostid_path, because if that is set and the
file it pointed to exists, spl_hostid will reflect its contents.
It eliminates the call to libc's gethostid().
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #745
Closes #6279
Dave Eddy [Tue, 30 May 2017 18:39:17 +0000 (11:39 -0700)]
OpenZFS 6939 - add sysevents to zfs core for commands
Authored by: Dave Eddy <dave@daveeddy.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Joshua M. Clulow <jmc@joyent.com>
Reviewed by: Josh Wilsdon <jwilsdon@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Alan Somers <asomers@gmail.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6939
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ce1577b
Closes #6328
When VERIFY3_IMPL() was adjusted in 682ce104, the values of
the operands were omitted from the variadic arguments list.
This patch simply corrects this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6343
The volmode property may be set to control the visibility of ZVOL
block devices.
This allow switching ZVOL between three modes:
full - existing fully functional behaviour (default)
dev - hide partitions on ZVOL block devices
none - not exposing volumes outside ZFS
Additionally the new zvol_volmode module parameter can be used to
control the default behaviour.
This functionality can be used, for instance, on "backup" pools to
avoid cluttering /dev with unneeded zd* devices.
Yuri Pankov [Tue, 13 Jun 2017 03:16:28 +0000 (20:16 -0700)]
OpenZFS 5428 - provide fts(), reallocarray(), and strtonum()
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
* All hunks unrelated to ZFS were dropped.
Exit test-runner with non-zero if tests are KILLED
fe46eeb introduced non-zero exit codes to test-runner.
A non-zero exit code should be returned when test-runner
decided to kill a test and mark it as KILLED.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6325
Commands should be eval()ed if they involve a shell redirection,
otherwise we end up writing log_* functions messages to the output.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6300
Closes #6323
Matthew Ahrens [Mon, 20 Mar 2017 22:38:11 +0000 (15:38 -0700)]
OpenZFS 8126 - ztest assertion failed in dbuf_dirty due to dn_nlevels changing
The sync thread is concurrently modifying dn_phys->dn_nlevels
while dbuf_dirty() is trying to assert something about it, without
holding the necessary lock. We need to move this assertion further down
in the function, after we have acquired the dn_struct_rwlock.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8126
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0ef125d
Closes #6314
Matthew Ahrens [Mon, 1 May 2017 18:06:07 +0000 (11:06 -0700)]
OpenZFS 8067 - zdb should be able to dump literal embedded block pointer
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8067
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085
Closes #6319
Antonio Russo [Fri, 7 Jul 2017 17:45:17 +0000 (13:45 -0400)]
Prevent dependencies on Debianized packages
Call dpkg-shlibdeps with arguments excluding the Debianized packages
lib{uutil1,nvpair1,zfs2,zpool2}linux from the auto-generated
dependencies of generated .debs. A shim dh_shlibdeps that calls the
real dh_shlibdeps with corresponding arguments is installed into a
temporary directory, which is in turn pre-pended to the PATH for the
alien call, working around alien's inability to directly alter the
dependencies of its output debs. Resolves #6106.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes #6309
Closes #6106
Illumos 4080 inadvertently allows 'zpool clear' on readonly pools: fix
this by reintroducing a check (POOL_CHECK_READONLY) in zfs_ioc_clear
registration code.
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6306
Alek P [Fri, 7 Jul 2017 05:16:13 +0000 (22:16 -0700)]
Implemented zpool scrub pause/resume
Currently, there is no way to pause a scrub. Pausing may
be useful when the pool is busy with other I/O to preserve
bandwidth.
This patch adds the ability to pause and resume scrubbing.
This is achieved by maintaining a persistent on-disk scrub state.
While the state is 'paused' we do not scrub any more blocks.
We do however perform regular scan housekeeping such as
freeing async destroyed and deadlist blocks while paused.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed-by: Serapheim Dimitropoulos <serapheimd@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6167
On the single core machine the system may hang when the
spa_namespare_lock acquisition fails in the zvol_first_open
function. It returns -ERESTARTSYS error what causes the
endless loop in __blkdev_get function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes #6283
Closes #6312
George Melikov [Wed, 5 Jul 2017 17:46:52 +0000 (20:46 +0300)]
ZTS: replace su commands by run_user function
Needed for PATH variable to be passed into su. The
posix* tests were fixed, but they need further investigation
before they can be enabled.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #6303
Matthew Ahrens [Fri, 14 Apr 2017 19:59:18 +0000 (12:59 -0700)]
OpenZFS 8378 - crash due to bp in-memory modification of nopwrite block
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The problem is that zfs_get_data() supplies a stale zgd_bp to
dmu_sync(), which we then nopwrite against.
zfs_get_data() doesn't hold any DMU-related locks, so after it
copies db_blkptr to zgd_bp, dbuf_write_ready() could change
db_blkptr, and dbuf_write_done() could remove the dirty record.
dmu_sync() then sees the stale BP and that the dbuf it not dirty,
so it is eligible for nop-writing.
The fix is for dmu_sync() to copy db_blkptr to zgd_bp after
acquiring the db_mtx. We could still see a stale db_blkptr,
but if it is stale then the dirty record will still exist and
thus we won't attempt to nopwrite.
Andriy Gapon [Sat, 11 Mar 2017 18:26:47 +0000 (20:26 +0200)]
OpenZFS 7600 - zfs rollback should pass target snapshot to kernel
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The existing kernel-side code only provides a method to rollback to a
latest snapshot, whatever it happens to be at the time when the rollback
is actually done. That could be unsafe or confusing in environments
where concurrent DSL changes are possible as the resulting state could
correspond to a newer or older snapshot than the originally requested
one.
This change allows to amend that method such that the rollback is
performed only when the latest snapshot has a specific name. That is,
if a new snapshot is concurrently created or the target snapshot is
destroyed, then no rollback is done and EXDEV error is returned.
New libzfs_core function lzc_rollback_to() is provided for the new
functionality. libzfs is changed to use lzc_rollback_to() to implement
zfs rollback command.
Perhaps we should return different errors to distinguish the case where
the desired snapshot exists but it's not the latest snapshot and the
case where the desired snapshot does not exist.
Andriy Gapon [Sat, 11 Mar 2017 17:48:35 +0000 (19:48 +0200)]
OpenZFS 7910 - l2arc_write_buffers() may write beyond target_sz
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7910
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cb6af4b
Closes #6291
George Melikov [Mon, 3 Jul 2017 21:21:12 +0000 (00:21 +0300)]
ZTS: minor typo and old default values
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #6298
Alek P [Fri, 30 Jun 2017 18:14:26 +0000 (14:14 -0400)]
On failure tests-runner should do non-zero exit
Right now test runner will always exit(0).
It's helpful to have zfs-tests.sh provide different
exit values depending on if everything passed or not.
We can then use common shell cmds to run tests until failure.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6285
Print fail messages before callbacks in test suite
Reorder operations in _endlog so failure messages get
printed prior to performing callbacks and cleanup. This
helps clarify why a test failed and places the message
closer to the point of incident in the resulting logs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6281
Sowrabha Gopal [Thu, 1 Jun 2017 20:27:02 +0000 (13:27 -0700)]
OpenZFS 8430 - dir_is_empty_readdir() doesn't properly handle error from fdopendir()
Authored by: Sowrabha Gopal <sowrabha.gopal@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
dir_is_empty_readdir() immediately returns if fdopendir() fails.
We should close dirfd when that happens.
Matthew Ahrens [Fri, 14 Apr 2017 19:52:43 +0000 (12:52 -0700)]
OpenZFS 8377 - Panic in bookmark deletion
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The problem is that when dsl_bookmark_destroy_check() is
executed from open context (the pre-check), it fills in
dbda_success based on the existence of the bookmark. But
the bookmark (or containing filesystem as in this case)
can be destroyed before we get to syncing context. When
we re-run dsl_bookmark_destroy_check() in syncing context,
it will not add the deleted bookmark to dbda_success,
intending for dsl_bookmark_destroy_sync() to not process
it. But because the bookmark is still in dbda_success from
the open-context call, we do try to destroy it.
The fix is that dsl_bookmark_destroy_check() should not
modify dbda_success when called from open context.
Matthew Ahrens [Thu, 29 Jun 2017 17:18:03 +0000 (10:18 -0700)]
Clean up large dnode code
Resolves issues discovered when porting to OpenZFS.
* Lint warnings.
* Made dnode_move_impl() large dnode aware. This
functionality is currently unused on Linux.
Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #6262
chrisrd [Thu, 29 Jun 2017 16:57:27 +0000 (02:57 +1000)]
Set arc_meta_limit, arc_dnode_limit on change
Make zfs_arc_meta_limit_percent and zfs_arc_dnode_limit_percent behave
as you would expect from zfs-module-parameters.5.
- recalculate arc_meta_limit if zfs_arc_meta_limit_percent changes
- recalculate arc_dnode_limit if zfs_arc_dnode_limit_percent changes
- correctly set arc_meta_limit and arc_dnode_limit if zfs_arc_max or
zfs_arc_meta_min changes
Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #6269
Tony Hutter [Wed, 28 Jun 2017 17:05:16 +0000 (10:05 -0700)]
GCC 7.1 fixes
GCC 7.1 with will warn when we're not checking the snprintf()
return code in cases where the buffer could be truncated. This
patch either checks the snprintf return code (where applicable),
or simply disables the warnings (ztest.c).
Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6253
George Melikov [Sun, 18 Jun 2017 18:27:06 +0000 (21:27 +0300)]
Convert man zpool.8 to mdoc (OpenZFS sync)
* Fixed some typos
* Additional description for some commands arguments
* `listsnapshots` remained
* Text reworked to be in sync with OpenZFS
* Added Linux as .Os type
* Updated `zpool events` section.
* Updated `zpool iostat|status -c` sections
* Added zed(8) reference to SEE ALSO
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #6245
Tony Hutter [Tue, 27 Jun 2017 19:00:27 +0000 (12:00 -0700)]
Fix RHEL 7.4 bio_set_op_attrs build error
On RHEL 7.4, include/linux/bio.h now includes a macro for
bio_set_op_attrs that conflicts with the ifndef in ZFS
include/linux/blkdev_compat.h. This patch fixes the build.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6234
Closes #6271
Brian Behlendorf [Tue, 27 Jun 2017 17:09:16 +0000 (10:09 -0700)]
Cap maximum aggregate IO size
Commit 8542ef8 allowed optional IOs to be aggregated beyond
the specified aggregation limit. Since the aggregation limit
was also used to enforce the maximum block size, setting
`zfs_vdev_aggregation_limit=16777216` could result in an
attempt to allocate an ABD larger than 16M.
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6259
Closes #6270
bunder2015 [Tue, 27 Jun 2017 17:06:07 +0000 (13:06 -0400)]
Fix zpool_add_005_pos
Under Linux the existence of a block device in /etc/fstab is
not sufficient to prevent the use of the force flag. Without
the force flag a warning will be printed that the device has
a filesystem of a given type. Providing the force option
will overwrite that filesystem as long as it is not actively
mounted.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Tested-by: bunder2015 <omfgbunder@gmail.com> Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #6267
Closes #6272
Boris Protopopov [Tue, 13 Jun 2017 16:03:44 +0000 (12:03 -0400)]
Refine use of zv_state_lock.
Use zv_state_lock to protect all members of zvol_state structure, add
relevant ASSERT()s. Take zv_suspend_lock before zv_state_lock, do not
hold zv_state_lock across suspend/resume.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Closes #6226
Authored by: Andrew Stormont <astormont@racktopsystems.com>
Reviewed by: Marcel Telka <marcel@telka.sk>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8331
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4f4378c
Closes #6255
Tony Hutter [Thu, 22 Jun 2017 16:39:01 +0000 (09:39 -0700)]
Dashes for zero latency values in zpool iostat -p
This prints dashes instead of zeros for zero latency values in
'zpool iostat -p'. You'll get zero latencies reported when the
disk is idle, but technically a zero latency is invalid, since you
can't measure the latency of doing nothing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6210
Morgan Jones [Mon, 19 Jun 2017 16:43:16 +0000 (16:43 +0000)]
Add kpreempt_disable/enable around CPU_SEQID uses
In zfs/dmu_object and icp/core/kcf_sched, the CPU_SEQID macro
should be surrounded by `kpreempt_disable` and `kpreempt_enable`
calls to avoid a Linux kernel BUG warning. These code paths use
the cpuid to minimize lock contention and is is safe to reschedule
the process to a different processor at any time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Morgan Jones <me@numin.it>
Closes #6239
Don Brady [Sat, 17 Jun 2017 00:21:11 +0000 (18:21 -0600)]
Inject zinject(8) a percentage amount of dev errs
In the original form of device error injection, it was an all or nothing
situation. To help simulate intermittent error conditions, you can now
specify a real number percentage value. This is also very useful for our
ZFS fault diagnosis testing and for injecting intermittent errors during
load testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6227
LOLi [Thu, 15 Jun 2017 18:08:45 +0000 (20:08 +0200)]
Fix zvol_state_t->zv_open_count race
5559ba0 added zv_state_lock to protect zvol_state_t internal data:
this, however, doesn't guard zv->zv_open_count and
zv->zv_disk->private_data in zvol_remove_minors_impl().
Fix this by taking zv->zv_state_lock before we check its zv_open_count.
Richard Yao [Tue, 13 Jun 2017 16:18:08 +0000 (12:18 -0400)]
Make zvol operations use _by_dnode routines
This continues what was started in 0eef1bde31d67091d3deed23fe2394f5a8bf2276 by fully converting zvols
to avoid unnecessary dnode_hold() calls. This saves a small amount
of CPU time and slightly improves latencies of operations on zvols.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <richard.yao@prophetstor.com>
Closes #6058
Cleanup zpool_import_all_001_pos to no longer use devices.
The test is meant to test zpool import -a and by no longer
requiring devices, a number of dependencies are no longer
necessary.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6198
Brian Behlendorf [Mon, 12 Jun 2017 16:45:32 +0000 (09:45 -0700)]
Use log_must_busy in destroy_pool
The log function log_must_busy was added in commit e623aea2 for
this purpose. Update destroy_pool to use it.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6217
projects / zfs / log