Paul Tan [Wed, 6 May 2015 08:01:03 +0000 (16:01 +0800)]
git-config: replace use of home_config_paths()
Since home_config_paths() combines distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Tan [Wed, 6 May 2015 08:01:02 +0000 (16:01 +0800)]
git-commit: replace use of home_config_paths()
Since home_config_paths() combines two distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Tan [Wed, 6 May 2015 08:01:01 +0000 (16:01 +0800)]
credential-store.c: replace home_config_paths() with xdg_config_home()
Since only the xdg credentials file path is required, and
home_config_paths() is unable to construct the path ~/.git-credentials,
simplify the code by replacing home_config_paths() with
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Tan [Tue, 21 Apr 2015 04:06:27 +0000 (12:06 +0800)]
path.c: implement xdg_config_home()
The XDG base dir spec[1] specifies that configuration files be stored in
a subdirectory in $XDG_CONFIG_HOME. To construct such a configuration
file path, home_config_paths() can be used. However, home_config_paths()
combines distinct functionality:
1. Retrieve the home git config file path ~/.gitconfig
2. Construct the XDG config path of the file specified by `file`.
This function was introduced in commit 21cf3227 ("read (but not write)
from $XDG_CONFIG_HOME/git/config file"). While the intention of the
function was to allow the home directory configuration file path and the
xdg directory configuration file path to be retrieved with one function
call, the hard-coding of the path ~/.gitconfig prevents it from being
used for other configuration files. Furthermore, retrieving a file path
relative to the user's home directory can be done with
expand_user_path(). Hence, it can be seen that home_config_paths()
introduces unnecessary complexity, especially if a user just wants to
retrieve the xdg config file path.
As such, implement a simpler function xdg_config_home() for constructing
the XDG base dir spec configuration file path. This function, together
with expand_user_path(), can replace all uses of home_config_paths().
Paul Tan [Tue, 24 Mar 2015 05:20:29 +0000 (13:20 +0800)]
t0302: test credential-store support for XDG_CONFIG_HOME
t0302 now tests git-credential-store's support for the XDG user-specific
configuration file $XDG_CONFIG_HOME/git/credentials. Specifically:
* Ensure that the XDG file is strictly opt-in. It should not be created
by git at all times if it does not exist.
* Conversely, if the XDG file exists, ~/.git-credentials should
not be created at all times.
* If both the XDG file and ~/.git-credentials exists, then both files
should be used for credential lookups. However, credentials should
only be written to ~/.git-credentials.
* Credentials must be erased from both files.
* $XDG_CONFIG_HOME can be a custom directory set by the user as per the
XDG base directory specification. Test that git-credential-store
respects that, but defaults to "~/.config/git/credentials" if it does
not exist or is empty.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Tan [Tue, 24 Mar 2015 05:20:28 +0000 (13:20 +0800)]
git-credential-store: support XDG_CONFIG_HOME
Add $XDG_CONFIG_HOME/git/credentials to the default credential search
path of git-credential-store. This allows git-credential-store to
support user-specific configuration files in accordance with the XDG
base directory specification[1].
~/.git-credentials has a higher precedence than
$XDG_CONFIG_HOME/git/credentials when looking up credentials. This
means that if any duplicate matching credentials are found in the xdg
file (due to ~/.git-credentials being updated by old versions of git or
outdated tools), they will not be used at all. This is to give the user
some leeway in switching to old versions of git while keeping the xdg
directory. This is consistent with the behavior of git-config.
However, the higher precedence of ~/.git-credentials means that as long
as ~/.git-credentials exist, all credentials will be written to the
~/.git-credentials file even if the user has an xdg file as having a
~/.git-credentials file indicates that the user wants to preserve
backwards-compatibility. This is also consistent with the behavior of
git-config.
To make this precedence explicit in docs/git-credential-store, add a new
section FILES that lists out the credential file paths in their order of
precedence, and explain how the ordering affects the lookup, storage and
erase operations.
Also, update the documentation for --file to briefly explain the
operations on multiple files if the --file option is not provided.
Since the xdg file will not be used unless it actually exists, to
prevent the situation where some credentials are present in the xdg file
while some are present in the home file, users are recommended to not
create the xdg file if they require compatibility with old versions of
git or outdated tools. Note, though, that "erase" can be used to
explicitly erase matching credentials from all files.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Jeff King <peff@peff.net> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Tan [Tue, 24 Mar 2015 05:20:27 +0000 (13:20 +0800)]
git-credential-store: support multiple credential files
Previously, git-credential-store only supported storing credentials in a
single file: ~/.git-credentials. In order to support the XDG base
directory specification[1], git-credential-store needs to be able to
lookup and erase credentials from multiple files, as well as to pick the
appropriate file to write to so that the credentials can be found on
subsequent lookups.
Note that some credential storage files may not be owned, readable or
writable by the user, as they may be system-wide files that are meant to
apply to every user.
Instead of a single file path, lookup_credential(), remove_credential()
and store_credential() now take a precedence-ordered string_list of
file paths. lookup_credential() expects both user-specific and
system-wide credential files to be provided to support the use case of
system administrators setting default credentials for users.
remove_credential() and store_credential() expect only the user-specific
credential files to be provided as usually the only config files that
users are allowed to edit are their own user-specific ones.
lookup_credential() will read these (user-specific and system-wide) file
paths in order until it finds the 1st matching credential and print it.
As some files may be private and thus unreadable, any file which cannot
be read will be ignored silently.
remove_credential() will erase credentials from all (user-specific)
files in the list. This is because if credentials are only erased from
the file with the highest precedence, a matching credential may still be
found in a file further down the list. (Note that due to the lockfile
code, this requires the directory to be writable, which should be so for
user-specific config files)
store_credential() will write the credentials to the first existing
(user-specific) file in the list. If none of the files in the list
exist, store_credential() will write to the filename specified by the
first item of the filename list. For backwards compatibility, this
filename should be "~/.git-credentials".
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Version numbers in asciidoc-generated content (such as man pages)
went missing as of da8a366 (Documentation: refactor common operations
into variables). Fix by putting the underscore back in the variable
name.
Signed-off-by: Sven van Haastregt <svenvh@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kacper Kornet [Thu, 22 Jan 2015 11:59:36 +0000 (12:59 +0100)]
Fix unclosed here document in t3301.sh
Commit 908a3203632a02568df230c0fccf9a2cd8da24e6 introduced indentation
to here documents in t3301.sh. However in one place <<-EOF was missing
-, which broke this test when run with mksh-50d. This commit fixes it.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Wed, 21 Jan 2015 07:05:03 +0000 (15:05 +0800)]
l10n: correct indentation of show-branch usage
An indentation error was found right after we started l10n round 2, and
commit d6589d1 (show-branch: fix indentation of usage string) and this
update would fix it.
Jeff King [Tue, 20 Jan 2015 22:14:48 +0000 (17:14 -0500)]
parse_color: fix return value for numeric color values 0-8
When commit 695d95d refactored the color parsing, it missed
a "return 0" when parsing literal numbers 0-8 (which
represent basic ANSI colors), leading us to report these
colors as an error.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Wed, 14 Jan 2015 20:28:56 +0000 (21:28 +0100)]
t1050-large: generate large files without dd
For some unknown reason, the dd on my Windows box segfaults randomly,
but since recently, it does so much more often than it used to, which
makes running the test suite burdensome.
Use printf to write large files instead of dd. To emphasize that three
of the large blobs are exact copies, use cp to allocate them.
The new code makes the files a bit smaller, and they are not sparse
anymore, but the tests do not depend on these properties. We do not want
to use test-genrandom here (which is used to generate large files
elsewhere in t1050), so that the files can be compressed well (which
keeps the run-time short).
The files are now large text files, not binary files. But since they
are larger than core.bigfilethreshold they are diagnosed as binary
by Git. For this reason, the 'git diff' tests that check the output
for "Binary files differ" still pass.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 14 Jan 2015 20:37:21 +0000 (12:37 -0800)]
Merge branch 'rh/autoconf-rhel3'
Build update for older RHEL.
* rh/autoconf-rhel3:
configure.ac: check for HMAC_CTX_cleanup
configure.ac: check for clock_gettime and CLOCK_MONOTONIC
configure.ac: check 'tv_nsec' field in 'struct stat'
We try to see if "tput" gives a useful result before switching TERM
to dumb and moving HOME to point to our fake location for stability
of the tests, and then use the command when coloring the output
from the tests, but there is no guarantee "tput" works after
switching HOME.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: do tests for color support after changing HOME
test-lib: use 'test ...' instead of '[ ... ]'
Junio C Hamano [Wed, 14 Jan 2015 20:35:48 +0000 (12:35 -0800)]
Merge branch 'tf/prompt-preserve-exit-status'
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? in all cases
* rh/hide-prompt-in-ignored-directory:
git-prompt.sh: allow to hide prompt for ignored pwd
git-prompt.sh: if pc mode, immediately set PS1 to a plain prompt
Junio C Hamano [Wed, 14 Jan 2015 20:31:50 +0000 (12:31 -0800)]
Merge branch 'km/imap-send-libcurl-options'
Now imap-send learned to talk to the server using cURL library,
allow the same GIT_CURL_VERBOSE environment variable to control the
verbosity of the chattering.
* km/imap-send-libcurl-options:
imap-send.c: set CURLOPT_USE_SSL to CURLUSESSL_TRY
imap-send.c: support GIT_CURL_VERBOSE
Junio C Hamano [Wed, 14 Jan 2015 20:29:47 +0000 (12:29 -0800)]
Merge branch 'js/remote-add-with-insteadof'
"git remote add $name $URL" is now allowed when "url.$URL.insteadOf"
is already defined.
* js/remote-add-with-insteadof:
Add a regression test for 'git remote add <existing> <same-url>'
git remote: allow adding remotes agreeing with url.<...>.insteadOf
Jeff King [Tue, 13 Jan 2015 02:28:58 +0000 (21:28 -0500)]
http-push: trim trailing newline from remote symref
When we fetch a symbolic ref file from the remote, we get
the whole string "ref: refs/heads/master\n", recognize it by
skipping past the "ref: ", and store the rest. We should
chomp the trailing newline.
This bug was introduced in ae021d8 (use skip_prefix to avoid
magic numbers, 2014-06-18), which did not notice that the
length computation fed to xmemdupz was quietly tweaked by 1
to account for this.
We can solve it by explicitly trimming the newline, which is
more obvious. Note that we use strbuf_rtrim here, which will
actually cut off any trailing whitespace, not just a single
newline. This is a good thing, though, as it makes our
parsing more liberal (and spaces are not valid in refnames
anyway).
Signed-off-by: Jeff King <peff@peff.net> Tested-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cat_one_file(), "type" and "size" variables are defined in the
function scope, and then two variables of the same name are defined
in a block in one of the if/else statement, hiding the definitions
in the outer scope.
Because the values of the outer variables before the control enters
this scope, however, do not have to be preserved, we can remove
useless definitions of variables from the inner scope safely without
breaking anything.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 5 Jan 2015 22:22:53 +0000 (22:22 +0000)]
doc: core.ignoreStat update, and clarify the --assume-unchanged effect
The assume-unchanged bit, and consequently core.ignoreStat, can be
misunderstood. Be assertive about the expectation that file changes should
notified to Git.
Overhaul the general wording thus:
1. direct description of what is ignored given first.
2. example instruction of the user manual action required.
3. use sideways indirection for assume-unchanged and update-index
references.
4. add a 'normally' to give leeway for the change detection.
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
for-each-ref: always check stat_tracking_info()'s return value
The code handling %(upstream:track) and %(upstream:trackshort)
assumed that it always had a valid branch that had been sanitized
earlier in populate_value(), and thus did not check the return value
of the call to stat_tracking_info().
While there is indeed some sanitization code that basically
corresponds to stat_tracking_info() returning 0 (no base branch
set), the function can also return -1 when the base branch did exist
but has since then been deleted.
In this case, num_ours and num_theirs had undefined values and a
call to `git for-each-ref --format="%(upstream:track)"` could print
spurious values such as
Verify stat_tracking_info()'s return value and do not print anything
if it returns -1. This behavior also matches the documentation ("has
no effect if the ref does not have tracking information associated
with it").
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Raphael Kubo da Costa <raphael.kubo.da.costa@intel.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 12 Jan 2015 22:02:54 +0000 (14:02 -0800)]
Merge branch 'jk/read-packed-refs-without-path-max' into maint
* jk/read-packed-refs-without-path-max:
read_packed_refs: use skip_prefix instead of static array
read_packed_refs: pass strbuf to parse_ref_line
read_packed_refs: use a strbuf for reading lines
Earlier we made "rev-list --object-edge" more aggressively list the
objects at the edge commits, in order to reduce number of objects
fetched into a shallow repository, but the change affected cases
other than "fetching into a shallow repository" and made it
unusably slow (e.g. fetching into a normal repository should not
have to suffer the overhead from extra processing). Limit it to a
more specific case by introducing --objects-edge-aggressive, a new
option to rev-list.
* bc/fetch-thin-less-aggressive-in-normal-repository:
pack-objects: use --objects-edge-aggressive for shallow repos
rev-list: add an option to mark fewer edges as uninteresting
Documentation: add missing article in rev-list-options.txt
- "exec_cmd.h" became unnecessary at b931aa5a (Call builtin ls-tree
in git-cat-file -p, 2006-05-26), when it changed an earlier code
that delegated tree display to "ls-tree" via the run_command()
API (hence needing "exec_cmd.h") to call cmd_ls_tree() directly.
We should have removed the include in the same commit, but we
forgot to do so.
- "diff.h" was added at e5fba602 (textconv: support for cat_file,
2010-06-15), together with "userdiff.h", but "userdiff.h" can be
included without including "diff.h"; the header was unnecessary
from the beginning.
- "tag.h" and "tree.h" were necessary since 8e440259 (Use blob_,
commit_, tag_, and tree_type throughout., 2006-04-02) to check
the type of object by comparing typename with tree_type and
tag_type (pointers to extern strings).
21666f1a (convert object type handling from a string to a number,
2007-02-26) made these <type>_type strings unnecessary, and it
could have switched to include "object.h", which is necessary to
use typename(), but it forgot to do so. Because "tag.h" and
"tree.h" include "object.h", it did not need to explicitly
include "object.h" in order to start using typename() itself.
We do not even have to include "object.h" after removing these
two #includes, because "builtin.h" includes "commit.h" which in
turn includes "object.h" these days. This happened at 7b9c0a69
(git-commit-tree: make it usable from other builtins,
2008-07-01).
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"cache.h" and "commit.h" are already included via "builtin.h".
We started to include "quote.h" at 575ba9d6 (GIT_TRACE: show which
built-in/external commands are executed, 2006-06-25) that wanted to
use sq_quote_print().
When 6ce4e61f (Trace into a file or an open fd and refactor tracing
code., 2006-09-02) introduced trace.c API, the calls this file makes
to sq_quote_print() were replaced by calls to trace_argv_printf()
that are declared in "cache.h", which this file already includes.
We should have stopped including "quote.h" in that commit, but
forgot to do so.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reuben Hawkins [Thu, 8 Jan 2015 20:00:57 +0000 (12:00 -0800)]
configure.ac: check for HMAC_CTX_cleanup
OpenSSL version 0.9.6b and before defined the function HMAC_cleanup.
Newer versions define HMAC_CTX_cleanup. Check for HMAC_CTX_cleanup and
fall back to HMAC_cleanup when the newer function is missing.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reuben Hawkins [Thu, 8 Jan 2015 20:00:56 +0000 (12:00 -0800)]
configure.ac: check for clock_gettime and CLOCK_MONOTONIC
Set or clear Makefile variables HAVE_CLOCK_GETTIME and
HAVE_CLOCK_MONOTONIC based upon results of the checks (overriding
default values from config.mak.uname).
CLOCK_MONOTONIC isn't available on RHEL3, but there are still RHEL3
systems being used in production.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / git / log