]>
granicus.if.org Git - libvpx/log
James Zern [Mon, 6 Jul 2015 22:52:38 +0000 (22:52 +0000)]
Merge "vp9_variance*.c: make static tables const"
James Zern [Mon, 6 Jul 2015 22:43:01 +0000 (22:43 +0000)]
Merge "mips msa vp9 subpel variance optimization"
Jingning Han [Mon, 6 Jul 2015 22:39:26 +0000 (22:39 +0000)]
Merge "Move subtract functions from vp9 to vpx_dsp"
James Zern [Mon, 6 Jul 2015 22:04:37 +0000 (15:04 -0700)]
vp9_variance*.c: make static tables const
Change-Id: Ia5044d13c09685c401191fe87fbf90d36203aadd
Parag Salasakar [Sun, 5 Jul 2015 16:14:06 +0000 (21:44 +0530)]
mips msa vp9 subpel variance optimization
Change-Id: If88401bf8c5d8ee58200278734d7a5058d1585d0
Debargha Mukherjee [Mon, 6 Jul 2015 21:36:38 +0000 (21:36 +0000)]
Merge "Expose params min-gf-interval/max-gf-interval"
James Zern [Mon, 6 Jul 2015 21:36:36 +0000 (21:36 +0000)]
Merge "remove vp9_get_interp_kernel()"
James Zern [Thu, 2 Jul 2015 02:01:58 +0000 (19:01 -0700)]
remove vp9_get_interp_kernel()
expose filter_kernels[] and do the table lookup directly
Change-Id: I0b10bff0327c3e01a723736141a9ffd377cd3d20
Debargha Mukherjee [Wed, 1 Apr 2015 23:39:06 +0000 (16:39 -0700)]
Expose params min-gf-interval/max-gf-interval
Adds two new vp9 parameters --min-gf-interval and --max-gf-interval
to enable testing based on frequency of alt-ref frames.
Also adds a unit-test to test enforcement of min-gf-interval.
For both these parameters the default value is 0, which indicates
they are picked by the encoder, based on resolution and framerate
considerations. If they are greater than zero, the specified
parameter is honored.
(Additional note by paulwilkins)
Note that there is a slight oddity in that key frames are also GFs and
considered part of GF only group. However they are treated as not
being part of an arf group because for arf groups the previous GF is
assumed to be the terminal or overlay frame for the previous group.
(end note)
Change-Id: Ibf0c30b72074b3f71918ab278ccccc02a95a70a0
Jingning Han [Mon, 6 Jul 2015 16:33:27 +0000 (09:33 -0700)]
Move subtract functions from vp9 to vpx_dsp
Factor out the subtraction operator as common function.
Change-Id: I526e703477c6a290e0e3e3c8898f8bb1ca82779b
Jingning Han [Mon, 6 Jul 2015 17:01:29 +0000 (17:01 +0000)]
Merge "Rename vpx_thread to vpx_util"
James Zern [Fri, 3 Jul 2015 18:44:00 +0000 (18:44 +0000)]
Merge "Revert "Correct the inter prediction coordinate...""
hkuang [Wed, 1 Jul 2015 23:22:47 +0000 (16:22 -0700)]
Revert "Correct the inter prediction coordinate..."
Change in
92b199061a13173d29247257f4ef906d38b012bf leads to frame parallel
decode failure in extreme case.
addresses issue #1010
Change-Id: I4fa488dac8e8c584f5eef4cae1640a579130d387
James Zern [Thu, 2 Jul 2015 21:07:31 +0000 (21:07 +0000)]
Merge "Revert "mips msa vp9 subpel variance optimization""
James Zern [Thu, 2 Jul 2015 21:07:22 +0000 (21:07 +0000)]
Merge "Revert "mips msa vp9 avg subpel variance optimization""
James Zern [Thu, 2 Jul 2015 19:02:52 +0000 (12:02 -0700)]
Revert "mips msa vp9 subpel variance optimization"
This reverts commit
a42df86c035d1bc007dbc816b4b758605135d6d9 .
this change causes MSA/VP9SubpelVarianceTest.Ref and
MSA/VP9SubpelVarianceTest.ExtremeRef failures under
mips32r5el-msa-linux-gnu and mips64r6el-msa-linux-gnu
Change-Id: I40b71a0b774eaeb31f66f795733f95cf360909f7
James Zern [Thu, 2 Jul 2015 19:01:16 +0000 (12:01 -0700)]
Revert "mips msa vp9 avg subpel variance optimization"
This reverts commit
61774ad1c44c73ccde48a2e3456e86196965b5dc .
this change causes MSA/VP9SubpelAvgVarianceTest.Ref failures under
mips32r5el-msa-linux-gnu and mips64r6el-msa-linux-gnu
Change-Id: I7fb520c12b2a3b212d5e84b7619a380a48e49bb0
Jingning Han [Thu, 2 Jul 2015 17:01:09 +0000 (10:01 -0700)]
Rename vpx_thread to vpx_util
Change the dir name to include more util tools.
Change-Id: Id5b16062803ce5eed872fe2edb36d7e56b32eed8
Jingning Han [Thu, 2 Jul 2015 04:24:53 +0000 (04:24 +0000)]
Merge "Use vpx prefix for codec independent threading functions"
Jingning Han [Thu, 2 Jul 2015 04:24:35 +0000 (04:24 +0000)]
Merge "Move multi-threading module functions into vpx_thread folder"
James Zern [Thu, 2 Jul 2015 01:52:39 +0000 (01:52 +0000)]
Merge "vp9_pred_common: inline vp9_get_tx_size_context"
James Zern [Thu, 2 Jul 2015 01:52:19 +0000 (01:52 +0000)]
Merge "vp9_pred_common: inline vp9_get_segment_id"
James Zern [Thu, 2 Jul 2015 01:51:24 +0000 (01:51 +0000)]
Merge "vp9_dsubexp: replace some divides with shifts"
James Zern [Thu, 2 Jul 2015 01:51:05 +0000 (01:51 +0000)]
Merge "vp9/inv_remap_prob: simplify inv_map_table[]"
James Zern [Thu, 2 Jul 2015 01:50:44 +0000 (01:50 +0000)]
Merge "vp9_dsubexp: remove clamp in inv_remap_prob()"
Jingning Han [Wed, 1 Jul 2015 23:32:48 +0000 (16:32 -0700)]
Use vpx prefix for codec independent threading functions
Replace vp9_ prefix with vpx_ for common multi-threading functions.
Change-Id: I941a5ead9bfe8213fdad345511d2061b07797b55
Jingning Han [Wed, 1 Jul 2015 21:58:13 +0000 (14:58 -0700)]
Move multi-threading module functions into vpx_thread folder
This commit moves the primitive multi-threading files from vp9
folder to vpx_thread, which will be accessible by all vpx codec.
Change-Id: Ib51e66e9c69801c10631fab56d35a0c0aaed5883
Johann [Wed, 1 Jul 2015 21:14:41 +0000 (21:14 +0000)]
Merge "Fix --disable-use-x86inc when used with --enable-vp9-highbitdepth"
Johann [Wed, 1 Jul 2015 21:14:16 +0000 (21:14 +0000)]
Merge "Fix --disable-use-x86inc"
Johann [Tue, 30 Jun 2015 00:04:58 +0000 (17:04 -0700)]
Fix --disable-use-x86inc when used with --enable-vp9-highbitdepth
Change-Id: I0ed6de72dc0bb99fc9c5b1f6500399b16754ffb3
Johann [Mon, 29 Jun 2015 23:44:30 +0000 (16:44 -0700)]
Fix --disable-use-x86inc
Change-Id: I374fcd8fb45a6893dcdeac6896671be142a99f06
James Zern [Wed, 1 Jul 2015 20:05:49 +0000 (20:05 +0000)]
Merge "mips msa vp9 avg subpel variance optimization"
Scott LaVarnway [Wed, 1 Jul 2015 20:01:51 +0000 (20:01 +0000)]
Merge "Move inter_predictor to vp9_reconinter.h"
Parag Salasakar [Wed, 1 Jul 2015 18:23:08 +0000 (18:23 +0000)]
Merge "mips msa vpx_dsp sad sad4d avgsad optimization"
James Zern [Wed, 1 Jul 2015 17:57:52 +0000 (17:57 +0000)]
Merge "loopfiltersimpleverticaledge_neon: quiet uninit var warnings"
Scott LaVarnway [Wed, 1 Jul 2015 12:52:20 +0000 (12:52 +0000)]
Merge "VP9: Move ref_mvs[][] and mode_context[] from MB_MODE_INFO"
Parag Salasakar [Wed, 1 Jul 2015 08:16:41 +0000 (13:46 +0530)]
mips msa vp9 avg subpel variance optimization
average improvement ~3x-5x
Change-Id: Iefbcafc05daab77b38a4e63b551e427867a501a4
James Zern [Wed, 1 Jul 2015 06:23:59 +0000 (23:23 -0700)]
loopfiltersimpleverticaledge_neon: quiet uninit var warnings
take 2. localize the function parameter to actually remove the warning
Change-Id: I23c02061b5e21b0b75bd33c26062d1e531df7b92
Parag Salasakar [Wed, 1 Jul 2015 05:49:42 +0000 (11:19 +0530)]
mips msa vpx_dsp sad sad4d avgsad optimization
average improvement ~3x-5x
Change-Id: Ie30748cfbedebbd544b7ef4f286055ccb7f60306
James Zern [Wed, 1 Jul 2015 03:09:00 +0000 (20:09 -0700)]
vp9_dsubexp: replace some divides with shifts
Change-Id: I24e10c37ea8f06600cd04b43512efa6170e23e5c
James Zern [Wed, 1 Jul 2015 02:58:08 +0000 (19:58 -0700)]
vp9/inv_remap_prob: simplify inv_map_table[]
add one to each entry to remove the universal 'value + 1'.
Change-Id: I8919b1d7fde8155d1728196c4d577db3064e2c1e
Parag Salasakar [Wed, 1 Jul 2015 02:02:44 +0000 (07:32 +0530)]
mips msa vp9 subpel variance optimization
average improvement ~3x-5x
Change-Id: I4cbba2711467b0e205904769ebbb4a1fcbb1a311
Parag Salasakar [Wed, 1 Jul 2015 01:40:24 +0000 (01:40 +0000)]
Merge "mips msa vpx_dsp variance optimization"
James Zern [Tue, 30 Jun 2015 22:09:48 +0000 (15:09 -0700)]
vp9_dsubexp: remove clamp in inv_remap_prob()
the max value of the lookup in expanded form is:
(((1 << 7) - 1) << 1) - 65 + 1 + 64 = 254
remove the clamp [0, 253] and add one table entry
Change-Id: I0b5d0c66702fdb0b8f1cc9ab9b0dac66326e85a6
James Zern [Tue, 30 Jun 2015 21:12:50 +0000 (21:12 +0000)]
Merge "vp9_common_data: right-size tables"
Yaowu Xu [Tue, 30 Jun 2015 19:48:32 +0000 (19:48 +0000)]
Merge "Fixed a variance calculation"
Parag Salasakar [Fri, 26 Jun 2015 08:32:16 +0000 (14:02 +0530)]
mips msa vpx_dsp variance optimization
average improvement ~2x-4x
Change-Id: Ia3eef3f390148c2eb5cdc580a94cb26369737f82
Parag Salasakar [Tue, 30 Jun 2015 06:25:30 +0000 (06:25 +0000)]
Merge "mips msa vp9 common macro comments updated"
James Zern [Tue, 30 Jun 2015 06:21:58 +0000 (06:21 +0000)]
Merge changes Idce95354,I6b791088
* changes:
loopfiltersimpleverticaledge_neon: quiet uninit var warnings
idct_dequant_0_2x_neon: quiet uninit var warnings
Scott LaVarnway [Mon, 29 Jun 2015 16:27:11 +0000 (09:27 -0700)]
VP9: Move ref_mvs[][] and mode_context[] from MB_MODE_INFO
to MB_MODE_INFO_EXT. This saves 36 bytes per 8x8 area for
both the decoder and encoder. (encoder has two MODE_INFO
buffers)
Change-Id: If006abb2224acaf326df3c2be09e77e967662107
Scott LaVarnway [Mon, 29 Jun 2015 18:04:54 +0000 (18:04 +0000)]
Merge "Remove tile param"
Parag Salasakar [Fri, 26 Jun 2015 12:11:00 +0000 (17:41 +0530)]
mips msa vp9 common macro comments updated
Cosmetic/Grammatical corrections in vp9 macro comments
Change-Id: I774b983aff854feb69c7e4442e8731ce4c995645
Parag Salasakar [Sat, 27 Jun 2015 01:29:02 +0000 (01:29 +0000)]
Merge "mips msa vp9 temporal filter optimization"
Yaowu Xu [Fri, 26 Jun 2015 22:54:43 +0000 (15:54 -0700)]
Fixed a variance calculation
This commit fixed a mistake in variance calculation.
Thanks to Xintong for spotting the error.
Change-Id: Ia285fc0128c00f0234a73b0a7eba6adc88b8a7de
Tom Finegan [Fri, 26 Jun 2015 16:12:33 +0000 (16:12 +0000)]
Merge "vpxenc.sh: Add basic multithreaded frame parallel encode test."
Parag Salasakar [Fri, 26 Jun 2015 06:30:24 +0000 (12:00 +0530)]
mips msa vp9 temporal filter optimization
average improvement ~4x-5x
Change-Id: Iad9c0a296dbc2ea96d000bd009077999ed58a3c5
Parag Salasakar [Fri, 26 Jun 2015 03:53:56 +0000 (09:23 +0530)]
mips msa vp9 subtract block optimization
average improvement ~3x-4x
Change-Id: Idbe4d13a00d05ff8be6559b116f416e42c3b4097
Parag Salasakar [Fri, 26 Jun 2015 03:42:30 +0000 (03:42 +0000)]
Merge "mips msa vp9 block error optimization"
James Zern [Fri, 26 Jun 2015 03:27:50 +0000 (20:27 -0700)]
loopfiltersimpleverticaledge_neon: quiet uninit var warnings
the vector used in vld*_lane_* should be initialized before use
Change-Id: Idce95354737915f6fb4e6b5e8980a050e953036d
Parag Salasakar [Tue, 23 Jun 2015 07:18:50 +0000 (12:48 +0530)]
mips msa vp9 block error optimization
average improvement ~3x-4x
Change-Id: If0fdcc34b17437a7e3e7fb4caaf1067bc175f291
James Zern [Fri, 26 Jun 2015 03:27:50 +0000 (20:27 -0700)]
idct_dequant_0_2x_neon: quiet uninit var warnings
the vector used in vld*_lane_* should be initialized before use
Change-Id: I6b791088479fec3bc021ca75cc2af5adcc39d954
James Zern [Mon, 20 Apr 2015 22:56:10 +0000 (15:56 -0700)]
vp9_common_data: right-size tables
Change-Id: I2206ee148a46b234df58f2b623e9f32f26033e04
Tom Finegan [Wed, 24 Jun 2015 21:43:55 +0000 (14:43 -0700)]
vpxenc.sh: Add basic multithreaded frame parallel encode test.
Change-Id: Id526783fa2e3e9bb31229931b6548ac7a9b2b7e6
Marco [Thu, 25 Jun 2015 19:22:19 +0000 (12:22 -0700)]
Update to dynamic resize logic for 1pass CBR.
Only do the check for resizing if the feature is selected
(i.e., resize_mode = RESIZE_DYNAMIC).
And modify condition for checking to be resize_count >= window,
(since framerate can change).
Change-Id: Idceb4e50956bb965a1492b4993b0dcb393c9be4d
James Zern [Thu, 25 Jun 2015 02:14:18 +0000 (02:14 +0000)]
Merge "vp8_subpixelvariance_neon: right size coeff table"
Marco [Wed, 24 Jun 2015 23:12:12 +0000 (16:12 -0700)]
Fix to unstable build from commit 517a66.
Change-Id: I123db2d20ae65a10e2dec95eec61150e2f69546d
James Zern [Wed, 24 Jun 2015 21:23:15 +0000 (21:23 +0000)]
Merge "vp9_reconintra_neon: add d45 16x16"
Tom Finegan [Wed, 24 Jun 2015 16:36:08 +0000 (16:36 +0000)]
Merge "vpxenc.sh: Add basic vp9 multithread encode test."
James Zern [Sat, 6 Jun 2015 16:20:12 +0000 (09:20 -0700)]
vp8_subpixelvariance_neon: right size coeff table
only uint8 is required; each use only loads one value as a uint8
quiets a few type conversion warnings
Change-Id: I03dc0dc0eb01ac23a6e8673daa2b77c6c57bf1b0
James Zern [Wed, 24 Jun 2015 06:20:36 +0000 (06:20 +0000)]
Merge "build: add *test-no-data-check targets"
Tom Finegan [Wed, 24 Jun 2015 01:30:52 +0000 (18:30 -0700)]
vpxenc.sh: Add basic vp9 multithread encode test.
- Change default real time speed to -6.
- Add vpxenc_vp9_webm_rt_multithread, which encodes
niklas_1280_720_30.y4m with 2 to 4 threads using 2 to 4
tile columns.
Change-Id: I4d86c3360aec67ae5d1ba82eb6e0f0be8068b5af
Marco [Tue, 23 Jun 2015 23:55:15 +0000 (23:55 +0000)]
Merge "aq-mode=3: Reduce boost for segment#2 at low bitrates/low res."
Marco [Tue, 23 Jun 2015 00:50:01 +0000 (17:50 -0700)]
aq-mode=3: Reduce boost for segment#2 at low bitrates/low res.
Reduce boost for segment#2 for low bitrates and low-res.
This change is to reduce the rate overshoot at low bitrates.
No change in behavior, except at the very low bitrates.
Change-Id: I0dbd9d3b6356da5804de94adf10fca6a7a8f8948
Tom Finegan [Tue, 23 Jun 2015 22:57:03 +0000 (22:57 +0000)]
Merge "Fix building with iOS 9 beta SDK"
James Zern [Tue, 23 Jun 2015 03:57:14 +0000 (20:57 -0700)]
vp9_reconintra_neon: add d45 16x16
~90% faster over 20M pixels
Change-Id: I92d80f66e91e0a870a672cfb5dd29bf1a17cb11a
Parag Salasakar [Tue, 23 Jun 2015 02:02:25 +0000 (07:32 +0530)]
mips msa vp9 avg optimization
average improvement ~2x-3x
Change-Id: I76f7fc00c0ffdf2b4ba41bf3819f3b6044bcdeff
Parag Salasakar [Tue, 23 Jun 2015 01:46:52 +0000 (01:46 +0000)]
Merge "mips msa vp9 fdct 4x4 optimization"
Marco [Mon, 22 Jun 2015 22:20:28 +0000 (15:20 -0700)]
Fixes for key frame coding at speed 5.
Keep the same transform cutoff and partition selection
for speed 5 as in speeds >=6 (non-rd speed settings).
Existing setting for key frame at speed 5 allowed transform size
up to 32x32 on key frames, and did not allow for 4x4 block partition size.
This created more visual artifacts on first few frames.
avgPSNR/overallPSNR/SSIM gains of 0.2/0.7/0.8 for rtc_derf(low-res) set,
and 0/0.7/1.1 gains for rtc set.
Change-Id: I8c139ec6c9bb74e14b4ffbad5f12e94f18a59c0b
James Zern [Mon, 22 Jun 2015 22:27:56 +0000 (22:27 +0000)]
Merge "vp9_reconintra_neon: add d45 8x8"
Brion Vibber [Sat, 20 Jun 2015 19:08:35 +0000 (12:08 -0700)]
Fix building with iOS 9 beta SDK
configure.sh was setting some Mac OS X options for iOS targets, which
confuses the iOS 9 beta SDK in Xcode 7 when linking libraries.
Additionally, old armv6 media extensions were being enabled on iOS
when they're not needed (we always have Neon since iOS 6). These
broke on iOS 9 SDK which no longer assembles those instructions.
Change-Id: I4e4d2722392ead3382ce96289c03ef1e489799d6
Marco [Mon, 22 Jun 2015 16:59:47 +0000 (16:59 +0000)]
Merge "Reduce max_partition_size for low resolutions at speed 5."
Scott LaVarnway [Tue, 16 Jun 2015 13:38:34 +0000 (06:38 -0700)]
Remove tile param
and added to MACROBLOCKD.
Change-Id: I0e60aaa9f84bcc9f2376d71bd934f251baee38db
Parag Salasakar [Mon, 22 Jun 2015 09:00:24 +0000 (14:30 +0530)]
mips msa vp9 fdct 4x4 optimization
average improvement ~2x-3x
Change-Id: Idf8be780b8b4228fc91f110a94e4ee1fd9af0163
Frank Galligan [Fri, 19 Jun 2015 15:59:42 +0000 (08:59 -0700)]
Add assembly tests for int projections.
BUG=https://code.google.com/p/webm/issues/detail?id=1022
Change-Id: I5ae4acac39fd75c56d3feff0716cb52133de3b22
Parag Salasakar [Sat, 20 Jun 2015 02:58:08 +0000 (02:58 +0000)]
Merge "mips msa vp9 fdct 8x8 optimization"
James Zern [Sat, 20 Jun 2015 02:19:22 +0000 (19:19 -0700)]
vp9_reconintra_neon: add d45 8x8
based on ssse3 implementation
~91% faster over 20M pixels
Change-Id: I6d743a53352c2d6de0efe7899d7996e8b0f7fa29
Parag Salasakar [Thu, 18 Jun 2015 06:33:30 +0000 (12:03 +0530)]
mips msa vp9 fdct 8x8 optimization
average improvement ~4x-5x
Change-Id: I37582efc2622bc20b2bf99617a76110ab24e9f6a
James Zern [Sat, 20 Jun 2015 01:43:53 +0000 (01:43 +0000)]
Merge "Add dynamic range comment to vp9_int_pro_row"
Jingning Han [Tue, 16 Jun 2015 21:43:21 +0000 (14:43 -0700)]
Add dynamic range comment to vp9_int_pro_row
Change-Id: Icaa643568159c4e2db24eef42090b002ae02a45e
Jingning Han [Sat, 20 Jun 2015 00:35:05 +0000 (00:35 +0000)]
Merge "Add dynamic range comment to vp9_int_pro_col"
James Zern [Fri, 19 Jun 2015 23:02:28 +0000 (16:02 -0700)]
build: add *test-no-data-check targets
skips testdata verification; useful with slow media or if the data was
retrieved via a separate call to testdata
Change-Id: Ifd97892cee6c04b0111874cc8071675e90ec852b
Marco [Fri, 19 Jun 2015 23:40:01 +0000 (16:40 -0700)]
Reduce max_partition_size for low resolutions at speed 5.
For speed 5 real-time mode, the selection of the partition size for
superblocks on the segment (aq-mode=3) uses the non-rd recursive
pick partition search, and can sometimes select 64x64.
For low resolutions, visually better to limit this to 32x32.
Change-Id: I69657a7ed8899f8b3cf8c9c318a2509c5c72c565
Alex Converse [Thu, 18 Jun 2015 23:05:56 +0000 (16:05 -0700)]
Limit cyclic refresh revisitng blocks at the same quantizer.
For screen content don't refresh a block at a quantizer higher than
it was last coded at. PReviosuly at realtime speeds the encoder had a
tendency to recode a block from GOLDEN with a higher Q than it was last
coded at.
Change-Id: Iacd561806c769dcce1a81b9827ffc70090f5ba18
Yaowu Xu [Fri, 19 Jun 2015 19:02:09 +0000 (19:02 +0000)]
Merge "Fix a msvc compiler warning"
Jingning Han [Tue, 16 Jun 2015 21:45:58 +0000 (14:45 -0700)]
Add dynamic range comment to vp9_int_pro_col
Change-Id: If14d9f874bd0bf2c5a455982088fd70591f5ea5a
Johann Koenig [Fri, 19 Jun 2015 16:27:24 +0000 (16:27 +0000)]
Merge "Move vp8 variance files"
Yaowu Xu [Fri, 19 Jun 2015 16:04:29 +0000 (09:04 -0700)]
Fix a msvc compiler warning
Change-Id: Ida8a04370895ed14bd118324ec2577da926e4648
James Zern [Fri, 19 Jun 2015 03:32:24 +0000 (03:32 +0000)]
Merge "vp9_filter: make all filter tables static"
James Zern [Fri, 19 Jun 2015 03:31:37 +0000 (03:31 +0000)]
Merge changes I2552d810,I51952c0a,Ib82e4247,I9c8d16cb
* changes:
vp9_mcomp: make search_step_table static
vp9_encodeframe: delete auto_partition_range()
vp9_mcomp: don't mark setup_center_error() inline
vp9_encoder: hide adjust_image_stat()
James Zern [Fri, 19 Jun 2015 03:27:22 +0000 (03:27 +0000)]
Merge "vp9_reconintra_neon: add d45 4x4"