Jim Warner [Tue, 27 May 2014 05:00:00 +0000 (00:00 -0500)]
top: tweak hotplugged response and frame refresh logic
For some time now, top has refrained from updating the
current number of cpus and memory totals with each and
every refresh cycle. Rather, to lessen overhead costs,
such values are updated periodically (5 min & 3 secs).
The delay in updating the cpu count was only important
with the addition of a cpu, since any loss is detected
immediately. And the large interval was chosen because
of the costs once associated with a glibc sysconf call
and an unlikely scenario of physically adding the cpu.
But the ease with which cpus can be taken offline then
placed back online under linux suggests that 5 minutes
may be too high. So, without addressing the likelihood
of that act, top is now more responsive in these ways:
1) that 5 minute interval has been reduced to 1 minute
2) any key, not just Enter/Space, refreshes cpus & mem
Note: we leave the man document as is, suggesting that
only the Enter/Space keys force an update for hotplug.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sat, 24 May 2014 05:00:00 +0000 (00:00 -0500)]
ps: correct some man document deficiencies/aberrations
. a 'space' misinterpreted as the continuation request
. continuation character, resulting in a concatenation
. 2 missing fields inadvertently omitted from man page
Jim Warner [Sat, 24 May 2014 05:00:00 +0000 (00:00 -0500)]
top: add missing summary area info to the man document
Way back for release 3.2.6 of the original procps top,
a patch was introduced to explain abbreviations in the
summary area showing cpu state percentages. Ever since
that time the the 'id/idle' category has been missing.
This patch simply corrects that oversight, having been
noticed after a review of the outstanding Ubuntu bugs.
Reference(s):
. deficiency yet unresolved (May 2010)
https://bugs.launchpad.net/ubuntu/+source/procps/+bug/574624
. patch incorporated into 'ng' (Feb 2011)
commit ee5fd1dce1fe91531b8ee5ec3d7c6620fb7dc6a3
. cpu states doc requests (Jun 2005, Jan 2004)
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=312157
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=228899
Signed-off-by: Jim Warner <james.warner@comcast.net>
Craig Small [Tue, 27 May 2014 10:49:16 +0000 (20:49 +1000)]
Reduced partition type check
vmstat -p checks used to fail on systems with odd
partition tables, including some Debian buildd servers.
This change limits what sort of test partitions are used,
otherwise the test is skipped.
There probably are other valid partitions, these can be added
later, if known.
library: reverting tmpfs subtraction from cached (18-FEB-2014)
The subtraction was marked as reinforcing the misconception,
that memory in the page cache can be considered free.
The Cached value is not a sum of page cache and tmpfs,
as the tmpfs memory lives in the page cache and therefore
it's an inseparable part of it.
Jim Warner [Sun, 27 Apr 2014 05:00:00 +0000 (00:00 -0500)]
top: standardize <Esc> key support with prompted input
In release 3.3.6, some commands were equipped with the
concept of a 'default pid'. The initial implementation
meant that the intuitive <Esc> key would not always be
treated as one would expect under any well behaved UI.
This patch ensures the expected <Esc> key behavior of:
terminating user input while still making possible the
necessary distinction between 'no input' & 'defaults'.
Jim Warner [Sun, 27 Apr 2014 05:00:00 +0000 (00:00 -0500)]
top: avoid a 'nan' when the delay interval is very low
The granularity of /proc/uptime is fixed at hundredths
of a second. And, since we can cycle faster than that,
we are exposed to 'nan' when calculating elapsed time.
This commit will protect us from that outcome when the
delay interval has been set to an extremely low value.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Wed, 23 Apr 2014 05:00:01 +0000 (00:00 -0500)]
top: refactor man document so as to allow translations
The majority of changes in this commit are intended to
enable translation of top's man page. There were three
kinds of errors as seen by that po4a-updatepo program.
. a valid but unrecognized request concerning no-break
. an internally defined macro with a groff .de request
. occasional apostrophe at the beginning of some lines
With respect to the apostrophe, some have been changed
to back-tic since line placement could not be assured.
And other parts were re-flowed to avoid temptations to
escape as \' (technically an acute accent). Of course,
the opening back-tic with closing apostrophe looks odd
when ASCII, but should be rendered correctly as UTF-8.
It may yet be necessary to change the remaining single
'opening' quotes to back-tics as translation proceeds.
Should that become necessary, I intend to reduce quote
usage to the bare minimum throughout the man document.
There were also some formatting changes to enhance the
man2html output and then to other formats via htmldoc.
And, I wish to acknowledge that my meager groff skills
do not serve those programs very well at all. In other
words groff yet remains mostly incomprehensible to me.
Lastly a few content plus copyright updates were made.
Message(s):
. Unknown macro '.c2 `'. Remove it from the document, or refer to the Locale::Po4a::Man manpage to see how po4a can handle new macros.
. This page defines a new macro with '.de'. Since po4a is not a real groff parser, this is not supported.
. Unknown macro ''real time' scheduling priority.'. Remove it from the document, or refer to the Locale::Po4a::Man manpage to see how po4a can handle new macros.
Jim Warner [Fri, 25 Apr 2014 05:00:00 +0000 (00:00 -0500)]
top: protect against distortion when system time reset
If a system's time is adjusted backwards, then elapsed
time could appear as negative. This yielded a negative
%CPU value. Alternately if zeros were suppressed ('0')
the result was a blank %CPU column. In both cases that
distortion would last for one display cycle or until a
user forced a display refresh via some keyboard input.
The original recommendation was trading gettimeofday()
for clock_gettime() using CLOCK_MONOTONIC. But on some
systems that might not be possible, forcing the use of
CLOCK_REALTIME instead. Not only would that complicate
the build system, but it may leave us with minus %CPU.
Another approach was to ensure that elapsed time could
never be negative. Of course, this produced distortion
of %CPU values but it would be proportionally correct.
This wasn't dissimilar to a distortion already present
should the time be adjusted forward or backward within
any 'remaining' top delay intervals. These aberrations
would be avoided with clock_gettime & CLOCK_MONOTONIC,
but that is a less than ideal solution as noted above.
This final solution, which originated down under, will
simply rely on the /proc/uptime seconds, which will be
immune to *any* tampering with the system clock. Thus,
we now have a fix for the distortion we didn't know we
suffered plus a negative %CPU that began this odyssey.
Thanks to:
sk.alvin.x@gmail.com, for the original effort
jcapik@redhat.com, for a heads up on CLOCK_MONOTONIC
csmall-procps@enc.com.au, for the best suggestion of all
Reference(s):
. original post/patch
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday
. heads up on CLOCK_MONOTONIC
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday,2
. the final solution
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday,11
Signed-off-by: Jim Warner <james.warner@comcast.net>
Sami Farin [Fri, 14 Mar 2014 06:00:00 +0000 (00:00 -0600)]
sysctl: increase max supported line length of the conf file
I ran into this limit with net.ipv4.ip_local_reserved_ports ,
sysctl complained about the line after the long line, further
slowing down my error hunting.
Due to fgets usage, increase buffer size to 4096 chars with
minimum amount of code changes.
Signed-off-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Yuri Chornoivan [Mon, 3 Mar 2014 10:58:56 +0000 (21:58 +1100)]
Minor i18n fixes
Minor fixes that the translator (Yuri) has found in some of the
strings. You only know how many typos and thinkos you have when
someone is trying to translate it.
tmpfs has become much more widely used since distributions use it for
/tmp (Fedora 18+). In /proc/meminfo, memory used by tmpfs is accounted
into "Cached" (aka "NR_FILE_PAGES",
http://lxr.free-electrons.com/source/mm/shmem.c#L301 ).
The tools just pass it on, so what top, free and vmstat report as
"cached" is the sum of page cache and tmpfs.
free has the extremely useful "-/+ buffers/cache" output. However, now
that tmpfs is accounted into "cached", those numbers are way off once
you have big files in /tmp.
Fortunately, kernel 2.6.32 introduces "Shmem", which makes tmpfs memory
usage accessible from userspace (
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4b02108ac1b3354a22b0d83c684797692efdc395 ).
This patch substracts Shmem from Cached to get the actual page cache
memory. This makes both issues mentioned above disappear. For older
kernels, Shmem is not available (hence zero) and this patch is no-op.
Additionally:
* Update the man pages of free and vmstat to explain what is happening
* Finally drop "MemShared" from the /proc/meminfo parser, it has been
dead for 10+ years and is only causing confusion ( removed in kernel
2.5.54, see
https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/?id=fe04e9451e5a159247cf9f03c615a4273ac0c571 )
Jim Warner [Tue, 25 Feb 2014 06:00:00 +0000 (00:00 -0600)]
top: avoid name conflict in the next version of stdlib
Since its inception top has always used enumerators to
identify displayable fields. They've taken the form of
P_PID, etc. As it turns out, something has changed for
libc6-dev versions beyond 2.17-93 wherein 'P_PID' will
now be exposed via stdlib.h. I have not pinpointed the
exact cause but it may depend on header include order.
This patch just trades top's long standing 'P_' prefix
convention for that of 'EU_' (short for enumerator). I
cannot find *any* header under /usr/include/ currently
utilizing this particular three character combination.
And as a further safeguard top will henceforth include
'system' specific headers after the standard includes.
Craig Small [Sat, 22 Feb 2014 00:34:53 +0000 (11:34 +1100)]
Added get-trans target to Makefile
The get-trans target rsyncs the latest copies of translation files
from the translation project. I put this target in because I always
forget the exact syntax of the command.
Jim Warner [Thu, 20 Feb 2014 06:00:00 +0000 (00:00 -0600)]
top: restore the former behavior after stderr redirect
When top originally responded to the potential libnuma
stderr write, the library was consistently called with
each refresh cycle. That, in turn, guaranteed that any
warning message would be seen at program end by virtue
of: 1) having been issued before the 2nd refresh cycle
and; 2) benefiting from inherited /dev/null buffering.
A later efficiency refactor meant the numa library may
not always be called with every refresh cycle. Rather,
it was only called if top was in one of two numa views
(the '2' or '3' toggles). That, in turn, resulted in a
loss of any warning message at program end unless numa
mode had been preserved in the rcfile. In other words,
if top was started normally then a single cycle stderr
redirect would have long passed by the time the '2' or
'3' toggle was activated. The warning message actually
was spewed but quickly lost to the full screen refresh
which follows all keyboard interactions with the user.
This commit simply moves the restoration of our stderr
redirect to program end (instead of that first display
refresh). Now, any libnuma stderr warning message will
appear as the concluding output line upon quitting top
without regard to when any numa mode view was invoked.
And since this technique might be useful in some other
context (as an example of how to 'buffer' stderr) it's
been generalized with its own #define. But to maximize
its usefulness, the original redirect should be issued
much earlier in pgm startup than top has chosen to do.
Jaromir Capik [Wed, 5 Feb 2014 16:09:45 +0000 (17:09 +0100)]
vmstat: Fixing format-security flaws
Previously the headers were printed directly without
the format specifier. That way is considered insecure
and leads to build errors with -Werror=format-security
flag set.
Josh Stone [Tue, 4 Feb 2014 17:46:58 +0000 (09:46 -0800)]
watch: Don't leak extra fds to the child
Once the write side of the pipe has been duped to stdout for the child,
the original pipefd is no longer needed, so it can be closed to avoid
leaking to the child.
The leak can easily be seen with "watch ls -l /proc/self/fd", but I
found this due to "watch lvs" diagnosing itself:
File descriptor 4 (pipe:[3163616]) leaked on lvs invocation.
Jaromir Capik [Tue, 4 Feb 2014 18:10:42 +0000 (19:10 +0100)]
vmstat: Support for timestamps with '-t' & fix for '-wd'
From now the vmstat can append a timestamp to each line in the
VMSTAT and DISKSTAT mode. You can achieve that with the '-t'
switch.
The '-w' switch now works in the DISKSTAT mode too.
Elliott Forney [Thu, 30 Jan 2014 10:36:26 +0000 (21:36 +1100)]
pgrep fails to show full command line with -au
pgrep does not show the full command line when the -a and -u flags are
combined. The -a flag is ignored when the -u flag is used as well.
In addition, the supplied patch by Elliot did not fix the problem
when invert flag ( -v ) was used; a very small tweak to the patch
fixed this problem as well. This problem existed before.
Craig Small [Wed, 29 Jan 2014 11:28:02 +0000 (22:28 +1100)]
PID -2 to -9 for kill too
Commit 4359cf069819d9fb53493933e00d9af5c37bced5 restored kill's ability
to kill PID -1. This however left PIDs -2 to -9 (or rather process
groups 2 to 9) still having this problem. The check is now generically
looking for a digit and parses it correctly.
Craig Small [Wed, 29 Jan 2014 11:22:11 +0000 (22:22 +1100)]
Check for presence of disks in vmstat
vmstat -d or vmstat -p would crash mysteriously under different
circumstances. The problem was eventually tracked down to /sys not
being mounted which meant is_disk() always returned false.
The partition would then be attempted to be linked to a non-existent
disk causing a segfault.
vmstat will now not link to a disk if none exists.
The change in testing will skip those tests when /sys/block doesn't
exist.
Many thanks to Daniel Schepler for his analysis and suggestions.
Craig Small [Tue, 28 Jan 2014 11:35:26 +0000 (22:35 +1100)]
kill for PID -1 restored
Both the man page and the shell builtin kill mention you can
use PID -1, which means nuke everything you can get at.
Alas this "fun" option was missing and the only way to get
around it was with "kill -HUP -- -1".
This small change means kill -HUP -1 is back for all those
destructive types. The error was introduced when the argument
parser was fixed for other problems.
Jaromir Capik [Fri, 24 Jan 2014 17:07:34 +0000 (18:07 +0100)]
library: skip replacement of trailing '\0' in read_unvectored()
Under some circumstances the ksh shell doesn't fork new processes
when executing scripts and the script is interpreted by the
parent process. That makes the execution faster, but it means
ksh needs to reuse the /proc/PID/cmdline for the new script name
and arguments while the file length needs to stay untouched.
The fork is skipped only when the new cmdline is shorter than
the parent's cmdline and the rest of the file is filled
with '\0'. This is perfectly ok until we try to read the cmdline
of such process. As the read_unvectored() function replaces
all zeros with chosen separator, these trailing zeros are replaced
with spaces in case of the ps tool. Consequently it appends
multiple spaces at the end of the arguments string even when these
zeros do not represent any separators and therefore shouldn't
be replaced.
With this commit the read_unvectored() function skips the
replacement of trailing zeros and separates valid content only.
Jaromir Capik [Mon, 20 Jan 2014 18:59:39 +0000 (19:59 +0100)]
vmstat: wide output still not wide enough?
8 digits per memory column is apparently still too low
for systems with 128TB of RAM. Anyway, setting the limit
to 999TB (12 digits) must be sufficient for now as it
produces wide gaps on "regular" computers.
This commit also increases the number of digits per cpu
columns from 2 to 3 as some of them can hit the 100%
maximum in corner cases.
Jim Warner [Sun, 5 Jan 2014 06:00:00 +0000 (00:00 -0600)]
top: provide for discontinuous (not active) NUMA nodes
Apparently there are occasions when NUMA nodes may not
always be contiguous. Under such conditions nodes that
were not used would still occupy precious Summary Area
space showing 100% idle, under the '2' command toggle.
With this commit top will no longer display numa nodes
that have no associated cpu when the '2' toggle is on.
But just in case we wish to return to former behavior,
a new #define called OFF_NUMASKIP has been introduced.
And as an aside, a recent refactor mentioned below set
the stage for this patch to be 'self-tuning'. In other
words, if an inactive/non-displayed node should become
active (if even possible), then top will begin showing
such a node automatically with the next screen update.
Unfortunately, all inactive nodes now 'suppressed' are
still accessible via the '3' command. Those nodes will
just be displayed as empty (no associated cpus shown).
This is not really a top problem but more of a libnuma
and/or user deficiency. The library lacks the means to
validate a node id and the user then input a node that
was not even shown under a '2' toggle Summary display.
( too bad libnuma does not offer an 'is_node_active' )
( type function so top could warn a user when such a )
( discontinuous node was requested using his '3' cmd )
( sure, top could achieve this objective himself but )
( that would require making yet another array global )
( which i'm just not in the mood to do - besides, we )
( have already made enough concessions to libnuma.so )
Lastly, an existing #define (PRETEND_NUMA) was changed
to 'disable' node #1 so as to simulate a discontinuous
node. This allows testing of the '2' and '3' commands.
Craig Small [Tue, 14 Jan 2014 11:23:58 +0000 (22:23 +1100)]
ps: ignore SIGCONT
SIGCONT is a continue signal. It seems that some zsh setups can send
this signal, causing ps to abort. This is not what "continue" means.
This change just uses the default handler which will continue a stopped
process.
Craig Small [Fri, 27 Dec 2013 22:25:39 +0000 (09:25 +1100)]
Split help lines to help translators
To assist translators, the help lines are split so that each translation
chunk has one option. This gives bonus of if we add or change an option,
only that option remains untranslated rather than the entire help block.
Jim Warner [Sat, 30 Nov 2013 06:00:00 +0000 (00:00 -0600)]
top: follow usual name conventions for global variable
A recent change involving a one cycle stderr redirect,
to handle a libnuma potential transgression, failed to
follow normal global variable naming conventions. This
patch will capitalize the 1st letter of 'Stderr_save'.
Jim Warner [Fri, 29 Nov 2013 06:00:00 +0000 (00:00 -0600)]
top: do not lie about purported alphabetical orderings
Excluding those special X_XON/X_XOF enums, which might
not even be present, restore strict collating order of
all the case labels in the task_show switch statement.
Also, adjust a few sort callbacks for the same reason.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jaromir Capik [Mon, 25 Nov 2013 16:39:14 +0000 (17:39 +0100)]
vmstat: support for time stolen from virtual machines
Surprisingly the code for the 'st' column was added in the past,
but wasn't enabled. The vmstat manual already contains the 'st'
column and this commit finally enables the feature.
Jaromir Capik [Mon, 25 Nov 2013 15:56:10 +0000 (16:56 +0100)]
vmstat: -w switch for wider output
This is a rework of the merge request #5 that unconditionally
forced the output to cross the 80 chars border.
With this commit users can switch to the wide output mode
with the -w option.
Jim Warner [Wed, 13 Nov 2013 06:00:00 +0000 (00:00 -0600)]
top: increase the maximum number of displayable fields
The recent addition of namespaces, combined with those
potential suse out-of-memory fields, means that we are
close to the maximum number of fields poor ol' top can
display. Imagine, the really old top was limited to 26
fields (28 with the suse hack) and this top had neared
the version 'g' rcfile limits which were a healthy 55.
This patch adds another 15 fields to the maximum while
making it even easier to increase in the future. Also,
top still silently accommodates older config files all
the way back to the original pre-ng version top-3.2.8!
Signed-off-by: Jim Warner <james.warner@comcast.net>
While 'invisible' thread subdirectories are accessible
under /proc/ with stat/opendir calls, they have always
been treated as non-existent, as is true with readdir.
This patch trades the /proc/#/ns access convention for
the more proper /proc/#/task/#/ns approach when thread
access is desired. In addition some namespace code has
been simplified and made slightly more efficient given
the calloc nature of proc_t acquisition and its reuse.
Jim Warner [Sat, 9 Nov 2013 06:00:00 +0000 (00:00 -0600)]
top: eliminate yet more gcc subscript resolution bloat
This patch is inspired by the 'minimize numa overhead'
patch. It trades the use of subscripts for pointers to
avoid gcc repeated subscript offset calculation bloat.
Now, throughout the cpus_refresh function, a subscript
will be resolved just once & this will (dramatically?)
reduce the path-length taken for each and every frame!
For example, a non-optimized compilation could produce
400+ fewer machine instructions through pointer usage.
[ ok, optimized compiles only save 18+ instructions! ]
Lastly, any residual 'symmetry only' crap is now gone!
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Fri, 8 Nov 2013 06:00:00 +0000 (00:00 -0600)]
top: minimize the statistics overhead for numa support
A recent libnuma potential corruption problem solution
has caused me to reevaluate some associated numa logic
for efficiency. Here is a summary of the problems that
exist with current libnuma/user possible interactions:
. Whenever the numa library was present extra overhead
would always be incurred in maintaining the node stats
even when the '2' or '3' commands were not being used.
. As part of such overhead a separate loop was used to
reinitialize each cpu/node structure with each display
cycle so that prior accumulated totals were preserved.
Again, it didn't matter if numa data was really shown.
This commit attempts to refocus on the 'critical path'
costs in a running top by optimizing for the occasions
when numa node data is not being displayed. Under such
conditions, no extra overhead will be incurred whether
or not a distribution has the libnuma library present.
To achieve this goal, some additional overhead will be
incurred, but only when actually displaying numa data.
And all such new costs have been minimized in spite of
the gcc inclination to duplicate subscript resolution.
Jim Warner [Thu, 7 Nov 2013 06:00:00 +0000 (00:00 -0600)]
top: add some flexibility to dlopen() for numa support
A recent libnuma potential corruption problem solution
suggests that libnuma could change in the future so as
to not spew to stderr. This then raises a question how
top could exploit any such library change since we are
currently locked into version #1 of the library by way
of our dlopen("libnuma.so.1", RTLD_LAZY) runtime call.
While not an ultimate solution, this commit will first
try for the most recent version of that library during
top's startup before trying the original libnuma.so.1.
We do this via the unqualified library soname symlink.
For this new dlopen() call to succeed, technically the
numa 'devel' package would usually have been required,
but that's not always true with every distro. And when
the libnuma.so symlink isn't present, it can always be
manually added should a newer & better behaved library
arrive & users tire of the stderr warning at top exit.
Jim Warner [Wed, 6 Nov 2013 06:00:00 +0000 (00:00 -0600)]
top: expand on column highlight quirks in man document
Confession is supposed to be good for the sole, right?
After a senior moment regarding the 'x' toggle quirks,
and thinking top had somehow regressed, I concluded an
additional explanatory note might well be appropriate.
Those quirks were already documented under the 5d & 5e
topics. But there was no such caution documented under
the 'x' command explanation itself, found in topic 4c.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sun, 3 Nov 2013 05:00:00 +0000 (00:00 -0500)]
top: address some potential libnuma display corruption
There is a chance that the libnuma library may corrupt
top's display with some stderr warning messages in the
event something under /sys/devices/system/node/ cannot
be accessed. And, while 2 overridable 'weak' functions
are provided to alter such behavior, we can't use them
since top dynamically links to the library via dlopen.
This commit will redirect stderr to '/dev/null' during
just the first screen display cycle. Thus we can avoid
the corruption which would have remained visible until
the underlining screen row's data had finally changed.
Lastly, this patch should allow such a library warning
to actually appear when one finally exits our program.
[ i think the libnuma folks should consider changing ]
[ the error/warning interfaces to accommodate dlopen ]
[ rather than forcing something like the ugly kludge ]
[ we have employed or libnuma dependency on everyone ]
Jaromir Capik [Mon, 14 Oct 2013 13:38:33 +0000 (15:38 +0200)]
pidof: support for omitted %PPID and additional separators
This commit introduces support for special %PPID value that
can be passed to the -o option as a substitution for parent
PID. It also allows users to use two additional separators
for omitted PIDs - colon and semicolon.
Craig Small [Thu, 10 Oct 2013 23:07:10 +0000 (10:07 +1100)]
Update options to single strings
To assist the translators, each option is a separate string.
This means if we add/change/delete an option the remaining ones
will just keep working and only the impacted option needs some
translation work on it.
Jaromir Capik [Fri, 4 Oct 2013 18:35:01 +0000 (20:35 +0200)]
pidof: reimplemented from scratch (replacing sysvinit pidof)
As the sysvinit becomes obsolete, some of the bundled tools
need to find a new home. The procps-ng project seems to be
the most suitable project for adopting the pidof tool.
This commit introduces a redesigned version of pidof
that satisfies the LSB requirements.
In corner cases the behaviour might differ from the former
one as the new version doesn't use any stat(2) calls.
Craig Small [Wed, 9 Oct 2013 08:18:55 +0000 (19:18 +1100)]
Skip some tests if kill cannot be found
Some Debian pbuilders error out on some of the tests because
they cannot find kill to kill the test processes. Now if we
cannot find kill we skip those lot of tests.
Still need to work out why the S390 doesn't like test_sched
When Other filtering was introduced the nature of what
constituted a displayed row changed. No longer would a
task_show() call guarantee that another line is shown.
Rather, a non-empty string must have also been tested.
Unfortunately, when any task window was being filtered
for 'idle' mode or a particular 'user', the proc index
was incremented twice due to the perils of copy/paste.
Combining such an index increment with the new test of
task_show results works fine if filtering is inactive.
This was a particularly insidious bug which meant that
an adjacent task would be skipped whenever the current
task met 'idle' and/or 'user' filter criteria, and was
not otherwise excluded due to 'Other' filter criteria.
And, since it was the very next task that was ignored,
the bug was very susceptible to a window's sort order.
This could be illustrated when filtering on some user,
while sorting on PID. Then, toggling Forest View could
make otherwise unseen tasks appear and then disappear.
User workarounds are possible via interactive commands
trading the 'i' and 'u'/'U' provisions for the 'o'/'O'
other filtering capability thus avoiding an extra i++.
But that is certainly less than ideal and doesn't help
the 3.3.7 and 3.3.8 distorted command line provisions.
( this little buggie may end up costing me my pocket )
( protector, my coding badge & maybe even my cubicle )
Reference(s):
http://www.freelists.org/post/procps/Idle-elides-nonidle-processes
. bug originated with 'Other' filtering
commit 5edc6fb3174f1fd02bbfca61ec6d8a3a2e12f71c
Signed-off-by: Jim Warner <james.warner@comcast.net>
Craig Small [Fri, 20 Sep 2013 12:34:32 +0000 (22:34 +1000)]
sysctl --system ignores missing /etc/sysctl.conf
sysctl --system would not correctly return the RC for files in
subdirectories and would insist on having /etc/sysctl.conf
This update makes two changes when using sysctl --system:
- The RC status is ORed for each config file, meaning an error in
any file is propated to the RC
- If /etc/sysctl.conf doesn't exist we just don't load it
Jim Warner [Tue, 17 Sep 2013 05:00:00 +0000 (00:00 -0500)]
top: restore the lost final newline when in Batch mode
This patch adds the final newline when exiting 'Batch'
mode. Interestingly, it has been missing since release
3.3.5 but undetected until the Redhat bugzilla report.
Jim Warner [Thu, 12 Sep 2013 17:12:12 +0000 (12:12 -0500)]
misc: correct additional errors from merge request #13
Additional errors resulting from merge request #13 are
being addressed in this commit. They involve two cases
of trailing whitespace and one xwarnx printf type arg.
Jim Warner [Wed, 11 Sep 2013 14:11:13 +0000 (09:11 -0500)]
build-sys: fix the fatal 'make dist' error for nsutils
While a 'make dist' appeared to work fine without this
patch, the nsutils.h file was missing from the include
subdirectory. Thus the tarball could not support make.
Previously the shared memory column was always zero
for 2.6 series kernels (and later) due to the fact,
that the value was taken from the MemShared entry
that disappeared with 2.6 series kernels.
Later a new Shmem entry appeared in the /proc/meminfo
file and the 'shared' column now displays either
the MemShared or the Shmem value (depending on their
presence - the presence is mutually exclusive).
If none of the two entries is exported by the kernel,
then the column is zero.
free: clarification of credits for the Shmem support
An unpleasant thing happened when I comitted the shmem support
for the 'free' tool. We already had a merge request from
Adrian Brzezinski in the queue, doing exactly the same.
As Adrian deserves credits, I'm reverting the change
and re-applying with the next commit in order to make
him a part of the project history.
Jim Warner [Thu, 29 Aug 2013 05:00:00 +0000 (00:00 -0500)]
top: swat bug affecting batch mode and width provision
Normally, the internally tracked 'Screen_cols' can not
exceed the lessor of 512 or actual screen width. There
was one case, however, where that 512 byte upper limit
was no longer properly imposed as it should have been.
When operating in 'Batch' mode the actual screen width
was allowed to be exceeded when the optional -w switch
was also used. But, it should never have exceeded 512.
This patch ensures the upper limit is always observed.
Jim Warner [Tue, 20 Aug 2013 05:00:00 +0000 (00:00 -0500)]
top: correct, improve and otherwise tweak configs_read
This patch addresses the four '-Wunused-result' errors
generated whenever an optimized compile is invoked. It
also made the configs_read() guy a little more robust.
In the process, some logic was rearranged slightly and
some comments were re-indented simply for consistency.
Reference(s):
warning: ignoring return value of 'fgets', declared with attribute warn_unused_result [-Wunused-result]
warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Thu, 15 Aug 2013 05:00:00 +0000 (00:00 -0500)]
top: modest efficiency change to message line handling
When the final solution for cursor positioning for all
^Z or ^C cases was introduced the revised placement of
message line management introduced with the window mgr
'screen' refactor was retained. Those two commits mean
that a former tgoto was no longer needed when clearing
that msg line or displaying the scroll coordinate msg.
This patch eliminates the tgoto employed by frame_make
while assimilating a now defunct show_scroll function.
Jim Warner [Fri, 9 Aug 2013 05:00:00 +0000 (00:00 -0500)]
top: hint that Summary Area 'cached' is Mem (not Swap)
This patch just provides a visual clue to separate the
values reported for cached Memory from other values on
the Swapped line (which is being shared due to space).
Craig Small [Sun, 25 Aug 2013 07:43:20 +0000 (17:43 +1000)]
Increase watch interval.
watch would only use an interval of up to 4294 seconds and silently
change to this limit. The 4294 seconds is 2^32/10^6 or how many
microseconds fit into unsigned int.
This change increases the limit to 2^32 seconds which is
approximately 136 years. This should be ok for now. Anything above
the old limit now uses sleep() instead of usleep() which only uses
integers (so 9999.123 seconds will be 9999 seconds)
This bug was first reported in 2006 and included a patch by
Stephen Kratzer. The patch was updated to fit the current source.
Karel Zak [Tue, 13 Aug 2013 13:21:33 +0000 (15:21 +0200)]
build-sys: add support for silent buils
The automake AM_SILENT_RULES macro is supported since automake 1.11
(which is required for procps). The silent functionality is enabled by
default, you can change it by:
Karel Zak [Tue, 13 Aug 2013 13:21:31 +0000 (15:21 +0200)]
build-sys: cleanup AC_ARG_ENABLE() usage
* don't duplicate default behavior with [enable_foo=$enableval]
* don't introduce things like disable_* variables
* use everywhere the same coding style
Jim Warner [Wed, 7 Aug 2013 17:58:57 +0000 (12:58 -0500)]
ps: address a potential 'newline' quirk the libselinux
Sometimes with libselinux present but SELinux inactive
the context reported is "unconfined" which contains an
embedded newline. This then causes misalignment of any
subsequent data. So, ps will now protect against that.
Jim Warner [Sat, 6 Jul 2013 05:00:00 +0000 (00:00 -0500)]
top: correct cursor positioning for all ^Z or ^C cases
Some more (very obscure) conditions where a suspension
or program end might embed the shell prompt within top
output have been uncovered beyond the 2 already known.
We had already covered some suspend/end contingencies:
1. the users were using the 'fields management' screen
2. the users were prompted for any line oriented input
However, there remained some situations where ^Z or ^C
could still produce a misplaced cursor + shell prompt:
3. the 'g' command while waiting for the window choice
4. the 'W' command if about to overwrite an old rcfile
5. the '=' command when exploiting the Inspect feature
6. the period during which any error message was shown
But, even when all those bases are covered there still
remains a remote possibility that such interrupts will
occur during a top repaint cycle. So rather than throw
yet more code at these self-inflicted problems perhaps
it is better if we just throw in the proverbial towel.
Thus, I'll take the only sane approach and restore the
results expected ever since top's inception and before
scrollback buffers entered the picture. Namely, with a
^Z or ^C the cursor will be placed on the final screen
row. That usually means it will immediately follow the
last output line but it may follow many blank lines if
the user interrupts top when *not* on the main screen.
Jim Warner [Fri, 5 Jul 2013 05:00:00 +0000 (00:00 -0500)]
top: tweak cursor state code to swat an obscure buglet
An obscure bug has been discovered where a 'W' with an
old rcfile, warning against overwrite, would display a
cursor that should normally be hidden. This followed a
user's reply. So some logic was rearranged just a bit.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jaromir Capik [Wed, 7 Aug 2013 16:21:43 +0000 (18:21 +0200)]
free: reusing 'shared' for Shmem
Previously the shared memory column was always zero
for 2.6 series kernels (and later) due to the fact,
that the value was taken from the MemShared entry
that disappeared with 2.6 series kernels.
Later a new Shmem entry appeared in the /proc/meminfo
file and the 'shared' column now displays either
the MemShared or the Shmem value (depending on their
presence - the presence is mutually exclusive).
If none of the two entries is exported by the kernel,
then the column is zero.
Jaromir Capik [Wed, 7 Aug 2013 15:52:38 +0000 (17:52 +0200)]
ps: making the libselinux support configurable
Previously the libselinux support was present
in the sources, but disabled with a preprocessor
condition (#if 0).
From now the libselinux support can be enabled with
the --enable-libselinux switch available
in the configuration script. That way is more
flexible than local patches modifying the condition
value from 0 to 1.
projects / procps-ng / log