Fix the return type of GIN triConsistent support functions to "char".
They were marked to return a boolean, but they actually return a
GinTernaryValue, which is more like a "char". It makes no practical
difference, as the triConsistent functions cannot be called directly from
SQL because they have "internal" arguments, but this nevertheless seems
more correct.
Also fix the GinTernaryValue name in the documentation. I renamed the enum
earlier, but neglected the docs.
Alexander Korotkov. This is new in 9.4, so backpatch there.
Stephen Frost [Fri, 12 Sep 2014 15:24:09 +0000 (11:24 -0400)]
Handle border = 3 in expanded mode
In psql, expanded mode was not being displayed correctly when using
the normal ascii or unicode linestyles and border set to '3'. Now,
per the documentation, border '3' is really only sensible for HTML
and LaTeX formats, however, that's no excuse for ascii/unicode to
break in that case, and provisions had been made for psql to cleanly
handle this case (and it did, in non-expanded mode).
This was broken when ascii/unicode was initially added a good five
years ago because print_aligned_vertical_line wasn't passed in the
border setting being used by print_aligned_vertical but instead was
given the whole printTableContent. There really isn't a good reason
for vertical_line to have the entire printTableContent structure, so
just pass in the printTextFormat and border setting (similar to how
this is handled in horizontal_line).
The code that tried to split a page at 75/25 ratio, when appending to the
end of an index, was buggy in two ways. First, there was a silly typo that
caused it to just fill the left page as full as possible. But the logic as
it was intended wasn't correct either, and would actually have given a ratio
closer to 60/40 than 75/25.
Gaetano Mendola spotted the typo. Backpatch to 9.4, where this code was added.
Tom Lane [Fri, 12 Sep 2014 03:30:54 +0000 (23:30 -0400)]
Fix power_var_int() for large integer exponents.
The code for raising a NUMERIC value to an integer power wasn't very
careful about large powers. It got an outright wrong answer for an
exponent of INT_MIN, due to failure to consider overflow of the Abs(exp)
operation; which is fixable by using an unsigned rather than signed
exponent value after that point. Also, even though the number of
iterations of the power-computation loop is pretty limited, it's easy for
the repeated squarings to result in ridiculously enormous intermediate
values, which can take unreasonable amounts of time/memory to process,
or even overflow the internal "weight" field and so produce a wrong answer.
We can forestall misbehaviors of that sort by bailing out as soon as the
weight value exceeds what will fit in int16, since then the final answer
must overflow (if exp > 0) or underflow (if exp < 0) the packed numeric
format.
Per off-list report from Pavel Stehule. Back-patch to all supported
branches.
Peter Eisentraut [Fri, 12 Sep 2014 01:08:59 +0000 (21:08 -0400)]
Fix vacuumdb --analyze-in-stages --all order
When running vacuumdb --analyze-in-stages --all, it needs to run the
first stage across all databases before the second one, instead of
running all stages in a database before processing the next one.
Also respect the --quiet option with --analyze-in-stages.
Simplify calculation of Poisson distributed delays in pgbench --rate mode.
The previous coding first generated a uniform random value between 0.0 and
1.0, then converted that to an integer between 1 and 10000, and divided that
again by 10000. Those conversions are unnecessary; we can use the double
value that pg_erand48() returns directly. While we're at it, put the logic
into a helper function, getPoissonRand().
The largest delay generated by the old coding was about 9.2 times the
average, because of the way the uniformly distributed value used for the
calculation was truncated to 1/10000 granularity. The new coding doesn't
have such clamping. With my laptop's DBL_MIN value, the maximum delay with
the new coding is about 700x the average. That seems acceptable - any
reasonable pgbench session should last long enough to average that out.
Change the way latency is calculated with pgbench --rate option.
The reported latency values now include the "schedule lag" time, that is,
the time between the transaction's scheduled start time and the time it
actually started. This relates better to a model where requests arrive at a
certain rate, and we are interested in the response time to the end user or
application, rather than the response time of the database itself.
Also, when --rate is used, include the schedule lag time in the log output.
The --rate option is new in 9.4, so backpatch to 9.4. It seems better to
make this change in 9.4, while we're still in the beta period, than ship a
9.4 version that calculates the values differently than 9.5.
Peter Eisentraut [Thu, 11 Sep 2014 00:05:56 +0000 (20:05 -0400)]
Support older versions of "prove"
Apparently, older versions of "prove" (couldn't identify the exact
version from the changelog) don't look into the t/ directory for tests
by default, so specify it explicitly.
Tom Lane [Tue, 9 Sep 2014 22:35:17 +0000 (18:35 -0400)]
Preserve AND/OR flatness while extracting restriction OR clauses.
The code I added in commit f343a880d5555faf1dad0286c5632047c8f599ad was
careless about preserving AND/OR flatness: it could create a structure with
an OR node directly underneath another one. That breaks an assumption
that's fairly important for planning efficiency, not to mention triggering
various Asserts (as reported by Benjamin Smith). Add a trifle more logic
to handle the case properly.
Andres Freund [Mon, 8 Sep 2014 22:47:32 +0000 (00:47 +0200)]
Fix spinlock implementation for some !solaris sparc platforms.
Some Sparc CPUs can be run in various coherence models, ranging from
RMO (relaxed) over PSO (partial) to TSO (total). Solaris has always
run CPUs in TSO mode while in userland, but linux didn't use to and
the various *BSDs still don't. Unfortunately the sparc TAS/S_UNLOCK
were only correct under TSO. Fix that by adding the necessary memory
barrier instructions. On sparcv8+, which should be all relevant CPUs,
these are treated as NOPs if the current consistency model doesn't
require the barriers.
Will be backpatched to all released branches once a few buildfarm
cycles haven't shown up problems. As I've no access to sparc, this is
blindly written.
Stephen Frost [Tue, 9 Sep 2014 14:52:10 +0000 (10:52 -0400)]
Move ALTER ... ALL IN to ProcessUtilitySlow
Now that ALTER TABLE .. ALL IN TABLESPACE has replaced the previous
ALTER TABLESPACE approach, it makes sense to move the calls down in
to ProcessUtilitySlow where the rest of ALTER TABLE is handled.
This also means that event triggers will support ALTER TABLE .. ALL
(which was the impetus for the original change, though it has other
good qualities also).
Tom Lane [Mon, 8 Sep 2014 20:09:49 +0000 (16:09 -0400)]
Fix psql \s to work with recent libedit, and add pager support.
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Tom Lane [Mon, 8 Sep 2014 02:40:41 +0000 (22:40 -0400)]
Documentation fix: sum(float4) returns float4, not float8.
The old claim is from my commit d06ebdb8d3425185d7e641d15e45908658a0177d of
2000-07-17, but it seems to have been a plain old thinko; sum(float4) has
been distinct from sum(float8) since Berkeley days. Noted by KaiGai Kohei.
While at it, mention the existence of sum(money), which is also of
embarrassingly ancient vintage.
The link to the NIST web page about DES standards leads to nowhere, and
according to archive.org has been forwarded to an unrelated page for
many years. Therefore, just remove that link. More up to date
information can be found via Wikipedia, for example.
docs: Improve documentation of \pset without arguments.
The syntax summary previously failed to clarify that the first
argument is also optional. The textual description did mention it,
but all the way at the bottom. It fits better with the command
overview, so move it there, and fix the summary also.
Back-patch to 9.4 where \pset without arguments was supported.
Andres Freund [Mon, 1 Sep 2014 11:42:43 +0000 (13:42 +0200)]
Add skip-empty-xacts option to test_decoding for use in the regression tests.
The regression tests for contrib/test_decoding regularly failed on
postgres instances that were very slow. Either because the hardware
itself was slow or because very expensive debugging options like
CLOBBER_CACHE_ALWAYS were used.
The reason they failed was just that some additional transactions were
decoded. Analyze and vacuum, triggered by autovac.
To fix just add a option to test_decoding to only display transactions
in which a change was actually displayed. That's not pretty because it
removes information from the tests; but better than constantly failing
tests in very likely harmless ways.
Backpatch to 9.4 where logical decoding was introduced.
Andres Freund [Sun, 31 Aug 2014 22:17:18 +0000 (00:17 +0200)]
Declare lwlock.c's LWLockAcquireCommon() as a static inline.
68a2e52bbaf98f136 has introduced LWLockAcquireCommon() containing the
previous contents of LWLockAcquire() plus added functionality. The
latter then calls it, just like LWLockAcquireWithVar(). Because the
majority of callers don't need the added functionality, declare the
common code as inline. The compiler then can optimize away the unused
code. Doing so is also useful when looking at profiles, to
differentiate the users.
Backpatch to 9.4, the first branch to contain LWLockAcquireCommon().
Fix bug in compressed GIN data leaf page splitting code.
The list of posting lists it's dealing with can contain placeholders for
deleted posting lists. The placeholders are kept around so that they can
be WAL-logged, but we must be careful to not try to access them.
This fixes bug #11280, reported by Mårten Svantesson. Backpatch to 9.4,
where the compressed data leaf page code was added.
Tom Lane [Thu, 28 Aug 2014 22:21:11 +0000 (18:21 -0400)]
Fix citext upgrade script for disallowance of oidvector element assignment.
In commit 45e02e3232ac7cc5ffe36f7986159b5e0b1f6fdc, we intentionally
disallowed updates on individual elements of oidvector columns. While that
still seems like a sane idea in the abstract, we (I) forgot that citext's
"upgrade from unpackaged" script did in fact perform exactly such updates,
in order to fix the problem that citext indexes should have a collation
but would not in databases dumped or upgraded from pre-9.1 installations.
Even if we wanted to add casts to allow such updates, there's no practical
way to do so in the back branches, so the only real alternative is to make
citext's kluge even klugier. In this patch, I cast the oidvector to text,
fix its contents with regexp_replace, and cast back to oidvector. (Ugh!)
Since the aforementioned commit went into all active branches, we have to
fix this in all branches that contain the now-broken update script.
Alvaro Herrera [Wed, 27 Aug 2014 23:15:18 +0000 (19:15 -0400)]
Fix FOR UPDATE NOWAIT on updated tuple chains
If SELECT FOR UPDATE NOWAIT tries to lock a tuple that is concurrently
being updated, it might fail to honor its NOWAIT specification and block
instead of raising an error.
Fix by adding a no-wait flag to EvalPlanQualFetch which it can pass down
to heap_lock_tuple; also use it in EvalPlanQualFetch itself to avoid
blocking while waiting for a concurrent transaction.
Authors: Craig Ringer and Thomas Munro, tweaked by Álvaro
http://www.postgresql.org/message-id/51FB6703.9090801@2ndquadrant.com
Per Thomas Munro in the course of his SKIP LOCKED feature submission,
who also provided one of the isolation test specs.
Backpatch to 9.4, because that's as far back as it applies without
conflicts (although the bug goes all the way back). To that branch also
backpatch Thomas Munro's new NOWAIT test cases, committed in master by
Heikki as commit 9ee16b49f0aac819bd4823d9b94485ef608b34e8 .
Stephen Frost [Wed, 27 Aug 2014 03:08:41 +0000 (23:08 -0400)]
Fix Var handling for security barrier views
In some cases, not all Vars were being correctly marked as having been
modified for updatable security barrier views, which resulted in invalid
plans (eg: when security barrier views were created over top of
inheiritance structures).
In passing, be sure to update both varattno and varonattno, as _equalVar
won't consider the Vars identical otherwise. This isn't known to cause
any issues with updatable security barrier views, but was noticed as
missing while working on RLS and makes sense to get fixed.
Back-patch to 9.4 where updatable security barrier views were
introduced.
Kevin Grittner [Tue, 26 Aug 2014 15:00:42 +0000 (10:00 -0500)]
Fix superuser concurrent refresh of matview owned by another.
Use SECURITY_LOCAL_USERID_CHANGE while building temporary tables;
only escalate to SECURITY_RESTRICTED_OPERATION while potentially
running user-supplied code. The more secure mode was preventing
temp table creation. Add regression tests to cover this problem.
This fixes Bug #11208 reported by Bruno Emanuel de Andrade Silva.
Alvaro Herrera [Mon, 25 Aug 2014 19:33:19 +0000 (15:33 -0400)]
Revert XactLockTableWait context setup in conditional multixact wait
There's no point in setting up a context error callback when doing
conditional lock acquisition, because we never actually wait and so the
able wouldn't be able to see it.
Andres Freund [Mon, 25 Aug 2014 16:30:28 +0000 (18:30 +0200)]
Fix typos in some error messages thrown by extension scripts when fed to psql.
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
Peter Eisentraut [Sat, 23 Aug 2014 04:23:34 +0000 (00:23 -0400)]
doc: Improve pg_restore help output
Add a note that some options can be specified multiple times to select
multiple objects to restore. This replaces the somewhat confusing use
of plurals in the option descriptions themselves.
Tom Lane [Fri, 22 Aug 2014 17:18:00 +0000 (13:18 -0400)]
Fix corner-case behaviors in JSON/JSONB field extraction operators.
Cause the path extraction operators to return their lefthand input,
not NULL, if the path array has no elements. This seems more consistent
since the case ought to correspond to applying the simple extraction
operator (->) zero times.
Cause other corner cases in field/element/path extraction to return NULL
rather than failing. This behavior is arguably more useful than throwing
an error, since it allows an expression index using these operators to be
built even when not all values in the column are suitable for the
extraction being indexed. Moreover, we already had multiple
inconsistencies between the path extraction operators and the simple
extraction operators, as well as inconsistencies between the JSON and
JSONB code paths. Adopt a uniform rule of returning NULL rather than
throwing an error when the JSON input does not have a structure that
permits the request to be satisfied.
Back-patch to 9.4. Update the release notes to list this as a behavior
change since 9.3.
Change the way pg_basebackup's tablespace mapping is implemented.
Previously, we would first create the symlinks the way they are in the
original system, and at the end replace them with the mapped symlinks.
That never really made much sense, so now we create the symlink pointing
to the correct location to begin with, so that there's no need to fix
them at the end.
The old coding didn't work correctly on Windows, because Windows junction
points look more like directories than files, and ought to be removed with
rmdir rather than unlink. Also, it incorrectly used "%d" rather than "%u"
to print an Oid, but that's gone now.
Report and patch by Amit Kapila, with minor changes by me. Reviewed by
MauMau. Backpatch to 9.4, where the --tablespace feature was added.
Stephen Frost [Thu, 21 Aug 2014 23:06:17 +0000 (19:06 -0400)]
Rework 'MOVE ALL' to 'ALTER .. ALL IN TABLESPACE'
As 'ALTER TABLESPACE .. MOVE ALL' really didn't change the tablespace
but instead changed objects inside tablespaces, it made sense to
rework the syntax and supporting functions to operate under the
'ALTER (TABLE|INDEX|MATERIALIZED VIEW)' syntax and to be in
tablecmds.c.
Pointed out by Alvaro, who also suggested the new syntax.
Tom Lane [Wed, 20 Aug 2014 23:05:09 +0000 (19:05 -0400)]
More regression test cases for json/jsonb extraction operators.
Cover some cases I omitted before, such as null and empty-string
elements in the path array. This exposes another inconsistency:
json_extract_path complains about empty path elements but
jsonb_extract_path does not.
Tom Lane [Wed, 20 Aug 2014 20:48:37 +0000 (16:48 -0400)]
Fix core dump in jsonb #> operator, and add regression test cases.
jsonb's #> operator segfaulted (dereferencing a null pointer) if the RHS
was a zero-length array, as reported in bug #11207 from Justin Van Winkle.
json's #> operator returns NULL in such cases, so for the moment let's
make jsonb act likewise.
Also add a bunch of regression test queries memorializing the -> and #>
operators' behavior for this and other corner cases.
There is a good argument for changing some of these behaviors, as they
are not very consistent with each other, and throwing an error isn't
necessarily a desirable behavior for operators that are likely to be
used in indexes. However, everybody can agree that a core dump is the
Wrong Thing, and we need test cases even if we decide to change their
expected output later.
The commit changed the code so that it causes an errors when
IDENTIFY_SYSTEM returns three columns. But which prevents us
from using the replication-related utilities against the server
with older version. This is not what we want. For that
compatibility, we allow the utilities to receive three columns
as the result of IDENTIFY_SYSTEM eventhough it actually returns
four columns in 9.4 or later.
Fujii Masao [Tue, 19 Aug 2014 08:26:07 +0000 (17:26 +0900)]
Fix bug in checking of IDENTIFY_SYSTEM result.
5a991ef8692ed0d170b44958a81a6bd70e90585 added new column into
the result of IDENTIFY_SYSTEM command. But it was not reflected into
several codes checking that result. Specifically though the number of
columns in the result was increased to 4, it was still compared with 3
in some replication codes.
Back-patch to 9.4 where the number of columns in IDENTIFY_SYSTEM
result was increased.
Noah Misch [Tue, 19 Aug 2014 03:00:38 +0000 (23:00 -0400)]
Install libpq DLL with $(INSTALL_SHLIB).
Programs need execute permission on a DLL file to load it. MSYS
"install" ignores the mode argument, and our Cygwin build statically
links libpq into programs. That explains the lack of buildfarm trouble.
Back-patch to 9.0 (all supported versions).
Noah Misch [Tue, 19 Aug 2014 02:58:57 +0000 (22:58 -0400)]
Make pg_service.conf sample LDIF more portable.
The aboriginal sample placed connection parameters in
groupOfUniqueNames/uniqueMember. OpenLDAP, at least as early as version
2.4.23, rejects uniqueMember entries that do not conform to the syntax
for a distinguished name. Use device/description, which is free-form.
Back-patch to 9.4 for web site visibility.
Noah Misch [Tue, 19 Aug 2014 02:58:25 +0000 (22:58 -0400)]
Document new trigger-related forms of ALTER FOREIGN TABLE.
Oversight in commit 7cbe57c34dec4860243e6d0f81738cfbb6e5d069.
Back-patch to 9.4, where that commit first appeared. In passing,
release-note the FDW API postcondition change from the same commit.
Greg Stark [Mon, 18 Aug 2014 10:28:57 +0000 (11:28 +0100)]
Revert psql changes to support wrapped expanded mode. That feature is
nice and we'll keep it in 9.5 but it'll take more time to iron out the
collateral damage on other queries and also on tools like
check_postgres.
Tom Lane [Mon, 18 Aug 2014 05:17:49 +0000 (01:17 -0400)]
Fix obsolete mention of non-int64 support in CREATE SEQUENCE documentation.
The old text explained what happened if we didn't have working int64
arithmetic. Since that case has been explicitly rejected by configure
since 8.4.3, documenting it in the 9.x branches can only produce confusion.
Tom Lane [Mon, 18 Aug 2014 02:57:20 +0000 (22:57 -0400)]
Use ISO 8601 format for dates converted to JSON, too.
Commit f30015b6d794c15d52abbb3df3a65081fbefb1ed made this happen for
timestamp and timestamptz, but it seems pretty inconsistent to not
do it for simple dates as well.
Fujii Masao [Mon, 18 Aug 2014 02:18:53 +0000 (11:18 +0900)]
Add missing index terms for replication commands in the document.
Previously only CREATE_REPLICATION_SLOT was exposed as an index term.
That's odd and there is no reason not to add index terms for other
replication commands.
Tom Lane [Mon, 18 Aug 2014 02:26:49 +0000 (22:26 -0400)]
Make an editorial pass over the 9.4 release notes.
Update the notes to include commits through today, and do a lot of
wordsmithing and markup adjustment. Notably, don't use <link> where <xref>
will do; since we got rid of the text-format HISTORY file, there is no
longer a reason to avoid <xref>.
Tom Lane [Sun, 17 Aug 2014 19:59:06 +0000 (15:59 -0400)]
Improve DISCARD documentation.
The new DISCARD SEQUENCES option was inadequately described, and hadn't
been mentioned at all in the initial Description paragraph. Rather than
rectifying the latter the hard way, it seemed better to rewrite the
description as a summary, instead of having it basically duplicate
statements made under Parameters. Be more consistent about the ordering
of the options, too.
Peter Eisentraut [Sun, 17 Aug 2014 13:10:28 +0000 (09:10 -0400)]
doc: Work around stylesheet bug for man build
The upstream stylesheets for man output insert a *roff comment for an
occurrence of an indexterm, for reasons that have apparently been lost
in history. This, however, is done incorrectly and causes some
formatting problems. This hasn't been an issue until now, but the
reorganization of indexterm elements inside variablelists has triggered
this issue.
The upstream fix (http://sourceforge.net/p/docbook/bugs/1340/) is to
drop indexterms altogether in man output, and so we'll do the same here.
Tom Lane [Sat, 16 Aug 2014 17:48:43 +0000 (13:48 -0400)]
Fix bogus return macros in range_overright_internal().
PG_RETURN_BOOL() should only be used in functions following the V1 SQL
function API. This coding accidentally fails to fail since letting the
compiler coerce the Datum representation of bool back to plain bool
does give the right answer; but that doesn't make it a good idea.
Back-patch to older branches just to avoid unnecessary code divergence.
Tom Lane [Sat, 16 Aug 2014 16:53:57 +0000 (12:53 -0400)]
Fix bogus commutator/negator links for JSONB containment operators.
<@ and @> are each other's commutators, but they were incorrectly marked
as being each other's negators instead. (This was actually questioned
in a comment in the original commit, but nobody followed through :-(.)
Per bug #11178 from Christian Pronovost.
In passing, fix some JSONB operator descriptions that were randomly
different from the phrasing of every other similar description.
Peter Eisentraut [Fri, 15 Aug 2014 04:01:14 +0000 (00:01 -0400)]
Set shared library path for in-tree TAP tests
When the TAP tests are run in-tree (make check), set the shared library
path using the appropriate environment variable, using a logic similar
to pg_regress, so that the right libraries are used.
Tom Lane [Thu, 14 Aug 2014 20:05:49 +0000 (16:05 -0400)]
Update SysV parameter configuration documentation for FreeBSD.
FreeBSD hasn't made any use of kern.ipc.semmap since 1.1, and newer
releases reject attempts to set it altogether; so stop recommending
that it be adjusted. Per bug #11161.
Back-patch to all supported branches. Before 9.3, also incorporate
commit 7a42dff47, which touches the same text and for some reason
was not back-patched at the time.
Fujii Masao [Thu, 14 Aug 2014 04:57:52 +0000 (13:57 +0900)]
Fix help message in pg_ctl.
Previously the help message described that -m is an option for
"stop", "restart" and "promote" commands in pg_ctl. But actually
that's not an option for "promote". So this commit fixes that
incorrect description in the help message.
Back-patch to 9.3 where the incorrect description was added.
Fujii Masao [Wed, 13 Aug 2014 01:45:28 +0000 (10:45 +0900)]
Expose -S option in pg_receivexlog.
This option is equivalent to --slot option which pg_receivexlog has
already supported, which specifies the replication slot to use for
WAL streaming. pg_recvlogical has already supported both options,
and this commit makes pg_receivexlog consistent with pg_recvlogical
regarding the slot option.
Back-patch to 9.4 where the slot option was added.
Andres Freund [Tue, 12 Aug 2014 09:04:50 +0000 (11:04 +0200)]
Be less aggressive in asking for feedback of logical walsender clients.
When doing logical decoding using START_LOGICAL_REPLICATION in a
walsender process the walsender sometimes was sending out keepalive
messages too frequently. Asking for feedback every time.
WalSndWaitForWal() sends out keepalive messages when it's waiting for
new WAL to be generated locally when it sees that the remote side
hasn't yet flushed WAL up to the local position. That generally is
good but causes problems if the remote side only writes but doesn't
flush changes yet. So check for both remote write and flush position.
Additionally we've asked for feedback to the keepalive message which
isn't warranted when waiting for WAL in contrast to preventing
timeouts because of wal_sender_timeout.
Fujii Masao [Tue, 12 Aug 2014 07:50:09 +0000 (16:50 +0900)]
Change first call of ProcessConfigFile so as to process only data_directory.
When both postgresql.conf and postgresql.auto.conf have their own entry of
the same parameter, PostgreSQL uses the entry in postgresql.auto.conf because
it appears last in the configuration scan. IOW, the other entries which appear
earlier are ignored. But, previously, ProcessConfigFile() detected the invalid
settings of even those unused entries and emitted the error messages
complaining about them, at postmaster startup. Complaining about the entries
to ignore is basically useless.
This problem happened because ProcessConfigFile() was called twice at
postmaster startup and the first call read only postgresql.conf. That is, the
first call could check the entry which might be ignored eventually by
the second call which read both postgresql.conf and postgresql.auto.conf.
To work around the problem, this commit changes ProcessConfigFile so that
its first call processes only data_directory and the second one does all the
entries. It's OK to process data_directory in the first call because it's
ensured that data_directory doesn't exist in postgresql.auto.conf.
Back-patch to 9.4 where postgresql.auto.conf was added.
Fujii Masao [Mon, 11 Aug 2014 13:52:16 +0000 (22:52 +0900)]
Fix documentation oversights about pageinspect and initialization fork.
The initialization fork was added in 9.1, but has not been taken into
consideration in documents of get_raw_page function in pageinspect and
storage layout. This commit fixes those oversights.
get_raw_page can read not only a table but also an index, etc. So it
should be documented that the function can read any relation. This commit
also fixes the document of pageinspect that way.
Tom Lane [Sun, 10 Aug 2014 20:13:16 +0000 (16:13 -0400)]
Clarify type resolution behavior for domain types.
The user documentation was vague and not entirely accurate about how
we treat domain inputs for ambiguous operators/functions. Clarify
that, and add an example and some commentary. Per a recent question
from Adam Mackler.
It's acted like this ever since we added domains, so back-patch
to all supported branches.
Tom Lane [Sat, 9 Aug 2014 21:31:16 +0000 (17:31 -0400)]
Clean up handling of unknown-type inputs in json_build_object and friends.
There's actually no need for any special case for unknown-type literals,
since we only need to push the value through its output function and
unknownout() works fine. The code that was here was completely bizarre
anyway, and would fail outright in cases that should work, not to mention
suffering from some copy-and-paste bugs.
Tom Lane [Sat, 9 Aug 2014 20:35:32 +0000 (16:35 -0400)]
Further cleanup of JSON-specific error messages.
Fix an obvious typo in json_build_object()'s complaint about invalid
number of arguments, and make the errhint a bit more sensible too.
Per discussion about how to word the improved hint, change the few places
in the documentation that refer to JSON object field names as "names" to
say "keys" instead, since that's what we've said in the vast majority of
places in the docs. Arguably "name" is more correct, since that's the
terminology used in RFC 7159; but we're stuck with "key" in view of the
naming of json_object_keys() so let's at least be self-consistent.
I adjusted a few code comments to match this as well, and failed to
resist the temptation to clean up some odd whitespace choices in the
same area, as well as a useless duplicate PG_ARGISNULL() check. There's
still quite a bit of code that uses the phrase "field name" in non-user-
visible ways, so I left those usages alone.
Tom Lane [Sat, 9 Aug 2014 17:46:38 +0000 (13:46 -0400)]
Reject duplicate column names in foreign key referenced-columns lists.
Such cases are disallowed by the SQL spec, and even if we wanted to allow
them, the semantics seem ambiguous: how should the FK columns be matched up
with the columns of a unique index? (The matching could be significant in
the presence of opclasses with different notions of equality, so this issue
isn't just academic.) However, our code did not previously reject such
cases, but instead would either fail to match to any unique index, or
generate a bizarre opclass-lookup error because of sloppy thinking in the
index-matching code.
Bruce Momjian [Thu, 7 Aug 2014 18:56:13 +0000 (14:56 -0400)]
pg_upgrade: prevent oid conflicts with new-cluster TOAST tables
Previously, TOAST tables only required in the new cluster could cause
oid conflicts if they were auto-numbered and a later conflicting oid had
to be assigned.
Fujii Masao [Wed, 6 Aug 2014 05:49:43 +0000 (14:49 +0900)]
Change ParseConfigFp() so that it doesn't process unused entry of each parameter.
When more than one setting entries of same parameter exist in the
configuration file, PostgreSQL uses only entry appearing last in
configuration file scan. Since the other entries are not used,
ParseConfigFp() doesn't need to process them, but previously it did
that. This problematic behavior caused the configuration file scan
to detect invalid settings of unused entries (e.g., existence of
multiple entries of PGC_POSTMASTER parameter) and log the messages
complaining about them.
This commit changes the configuration file scan so that it processes
only last entry of each parameter.
Note that when multiple entries of same parameter exist both in
postgresql.conf and postgresql.auto.conf, unused entries in
postgresql.conf are still processed only at postmaster startup.
The problem has existed since old version, but a user is more likely
to encounter it since 9.4 where ALTER SYSTEM command was introduced.
So back-patch to 9.4.
Amit Kapila, slightly modified by me. Per report from Christoph Berg.
Bruce Momjian [Mon, 4 Aug 2014 15:45:45 +0000 (11:45 -0400)]
pg_upgrade: remove reference to autovacuum_multixact_freeze_max_age
autovacuum_multixact_freeze_max_age was added as a pg_ctl start
parameter in 9.3.X to prevent autovacuum from running. However, only
some 9.3.X releases have autovacuum_multixact_freeze_max_age as it was
added in a minor PG 9.3 release. It also isn't needed because -b turns
off autovacuum in 9.1+.
Without this fix, trying to upgrade from an early 9.3 release to 9.4
would fail.
Fujii Masao [Sat, 2 Aug 2014 05:57:21 +0000 (14:57 +0900)]
Fix bug in pg_receivexlog --verbose.
In 9.2, pg_receivexlog with verbose option has emitted the messages
at the end of each WAL file. But the commit 0b63291 suppressed such
messages by mistake. This commit fixes the bug so that pg_receivexlog
--verbose outputs such messages again.
Tom Lane [Wed, 30 Jul 2014 18:41:35 +0000 (14:41 -0400)]
Avoid wholesale autovacuuming when autovacuum is nominally off.
When autovacuum is nominally off, we will still launch autovac workers
to vacuum tables that are at risk of XID wraparound. But after we'd done
that, an autovac worker would proceed to autovacuum every table in the
targeted database, if they meet the usual thresholds for autovacuuming.
This is at best pretty unexpected; at worst it delays response to the
wraparound threat. Fix it so that if autovacuum is nominally off, we
*only* do forced vacuums and not any other work.
Per gripe from Andrey Zhidenkov. This has been like this all along,
so back-patch to all supported branches.
Robert Haas [Wed, 30 Jul 2014 15:25:58 +0000 (11:25 -0400)]
Fix mishandling of background worker PGPROCs in EXEC_BACKEND builds.
InitProcess() relies on IsBackgroundWorker to decide whether the PGPROC
for a new backend should be taken from ProcGlobal's freeProcs or from
bgworkerFreeProcs. In EXEC_BACKEND builds, InitProcess() is called
sooner than in non-EXEC_BACKEND builds, and IsBackgroundWorker wasn't
getting initialized soon enough.
Peter Eisentraut [Wed, 30 Jul 2014 03:47:16 +0000 (23:47 -0400)]
doc: Clean up some recently added PL/pgSQL documentation
- Capitalize titles consistently.
- Fix some grammar.
- Group "Obtaining Information About an Error" under "Trapping Errors",
but make "Obtaining the Call Stack Context Information" its own
section, since it's not about errors.
Treat 2PC commit/abort the same as regular xacts in recovery.
There were several oversights in recovery code where COMMIT/ABORT PREPARED
records were ignored:
* pg_last_xact_replay_timestamp() (wasn't updated for 2PC commits)
* recovery_min_apply_delay (2PC commits were applied immediately)
* recovery_target_xid (recovery would not stop if the XID used 2PC)
The first of those was reported by Sergiy Zuban in bug #11032, analyzed by
Tom Lane and Andres Freund. The bug was always there, but was masked before
commit d19bd29f07aef9e508ff047d128a4046cc8bc1e2, because COMMIT PREPARED
always created an extra regular transaction that was WAL-logged.
Backpatch to all supported versions (older versions didn't have all the
features and therefore didn't have all of the above bugs).
Reword the sentence for pg_logical_slot_peek_changes function.
Previously the duplicated paragraphs were used next to each other
in the document to demonstrate that the changes in the stream
were not consumed by pg_logical_slot_peek_changes function.
But some users misunderstood that the duplication of the same
paragraph was just typo. So this commit rewords the sentence in
the latter paragraph for less confusing.
projects / postgresql / log