Simon Riggs [Thu, 27 Apr 2017 12:41:22 +0000 (14:41 +0200)]
Rework handling of subtransactions in 2PC recovery
The bug fixed by 0874d4f3e183757ba15a4b3f3bf563e0393dd9c2
caused us to question and rework the handling of
subtransactions in 2PC during and at end of recovery.
Patch adds checks and tests to ensure no further bugs.
Author: Simon Riggs Reviewed-by: Tom Lane, Michael Paquier
Discussion: http://postgr.es/m/CANP8+j+vvXmruL_i2buvdhMeVv5TQu0Hm2+C5N+kdVwHJuor8w@mail.gmail.com
Tom Lane [Wed, 26 Apr 2017 20:17:29 +0000 (16:17 -0400)]
Allow multiple bgworkers to be launched per postmaster iteration.
Previously, maybe_start_bgworker() would launch at most one bgworker
process per call, on the grounds that the postmaster might otherwise
neglect its other duties for too long. However, that seems overly
conservative, especially since bad effects only become obvious when
many hundreds of bgworkers need to be launched at once. On the other
side of the coin is that the existing logic could result in substantial
delay of bgworker launches, because ServerLoop isn't guaranteed to
iterate immediately after a signal arrives. (My attempt to fix that
by using pselect(2) encountered too many portability question marks,
and in any case could not help on platforms without pselect().)
One could also question the wisdom of using an O(N^2) processing
method if the system is intended to support so many bgworkers.
As a compromise, allow that function to launch up to 100 bgworkers
per call (and in consequence, rename it to maybe_start_bgworkers).
This will allow any normal parallel-query request for workers
to be satisfied immediately during sigusr1_handler, avoiding the
question of whether ServerLoop will be able to launch more promptly.
There is talk of rewriting the postmaster to use a WaitEventSet to
avoid the signal-response-delay problem, but I'd argue that this change
should be kept even after that happens (if it ever does).
Backpatch to 9.6 where parallel query was added. The issue exists
before that, but previous uses of bgworkers typically aren't as
sensitive to how quickly they get launched.
Stephen Frost [Wed, 26 Apr 2017 18:59:22 +0000 (14:59 -0400)]
pg_get_partkeydef: return NULL for non-partitions
Our general rule for pg_get_X(oid) functions is to simply return NULL
when passed an invalid or inappropriate OID. Teach pg_get_partkeydef to
do this also, making it easier for users to use this function when
querying against tables with both partitions and non-partitions (such as
pg_class).
As a concrete example, this makes pg_dump's life a little easier.
Peter Eisentraut [Wed, 26 Apr 2017 14:43:04 +0000 (10:43 -0400)]
Fix various concurrency issues in logical replication worker launching
The code was originally written with assumption that launcher is the
only process starting the worker. However that hasn't been true since
commit 7c4f52409 which failed to modify the worker management code
adequately.
This patch adds an in_use field to the LogicalRepWorker struct to
indicate whether the worker slot is being used and uses proper locking
everywhere this flag is set or read.
However if the parent process dies while the new worker is starting and
the new worker fails to attach to shared memory, this flag would never
get cleared. We solve this rare corner case by adding a sort of garbage
collector for in_use slots. This uses another field in the
LogicalRepWorker struct named launch_time that contains the time when
the worker was started. If any request to start a new worker does not
find free slot, we'll check for workers that were supposed to start but
took too long to actually do so, and reuse their slot.
In passing also fix possible race conditions when stopping a worker that
hasn't finished starting yet.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com> Reported-by: Fujii Masao <masao.fujii@gmail.com>
Stephen Frost [Tue, 25 Apr 2017 20:57:43 +0000 (16:57 -0400)]
Allow ALTER TABLE ONLY on partitioned tables
There is no need to forbid ALTER TABLE ONLY on partitioned tables,
when no partitions exist yet. This can be handy for users who are
building up their partitioned table independently and will create actual
partitions later.
In addition, this is how pg_dump likes to operate in certain instances.
Author: Amit Langote, with some error message word-smithing by me
Peter Eisentraut [Tue, 25 Apr 2017 18:40:33 +0000 (14:40 -0400)]
Wake up launcher when enabling a subscription
Otherwise one would have to wait up to DEFAULT_NAPTIME_PER_CYCLE until
the subscription worker is considered for starting.
There is a small race condition: If one enables a subscription right
after disabling it, the launcher might not have registered the stopping
when receiving the wakeup signal for the re-enabling. The start will
then not happen right away but after the full cycle time.
Set the priorities of all quorum synchronous standbys to 1.
In quorum-based synchronous replication, all the standbys listed in
synchronous_standby_names equally have chances to be chosen
as synchronous standbys. So they should have the same priority.
However, previously, quorum standbys whose names appear earlier
in the list were given higher priority values though the difference of
those priority values didn't affect the selection of synchronous standbys.
Users could see those "meaningless" priority values in pg_stat_replication
and this was confusing.
This commit gives all the quorum synchronous standbys the same
highest priority, i.e., 1, in order to remove such confusion.
Robert Haas [Tue, 25 Apr 2017 14:57:13 +0000 (10:57 -0400)]
Adjust outdated comment.
Commit 5dfc198146b49ce7ecc8a1fc9d5e171fb75f6ba5 removed the only
existing caller of hash_freeze, but left behind a comment indicating
that hash_freeze was still used. Adjust.
Peter Eisentraut [Tue, 25 Apr 2017 02:50:07 +0000 (22:50 -0400)]
postgres_fdw: Fix join push down with extensions
Objects in an extension are shippable to a foreign server if the
extension is part of the foreign server definition's shippable
extensions list. But this was not properly considered in some cases
when checking whether a join condition can be pushed to a foreign server
and the join condition uses an object from a shippable extension. So
the join would never be pushed down in those cases.
So, the list of extensions needs to be made available in fpinfo of the
relation being considered to be pushed down before any expressions are
assessed for being shippable. Fix foreign_join_ok() to do that for a
join relation.
The code to save FDW options in fpinfo is scattered at multiple places.
Bring all of that together into functions apply_server_options(),
apply_table_options(), and merge_fdw_options().
David Rowley and Ashutosh Bapat, per report from David Rowley
Buildfarm results suggest that some platforms have versions of pselect(2)
that are not merely non-atomic, but flat out non-functional. Revert the
use-pselect patch to confirm this diagnosis (and exclude the no-SA_RESTART
patch as the source of trouble). If it's so, we should probably look into
blacklisting specific platforms that have broken pselect.
Tom Lane [Mon, 24 Apr 2017 18:03:14 +0000 (14:03 -0400)]
Use pselect(2) not select(2), if available, to wait in postmaster's loop.
Traditionally we've unblocked signals, called select(2), and then blocked
signals again. The code expects that the select() will be cancelled with
EINTR if an interrupt occurs; but there's a race condition, which is that
an already-pending signal will be delivered as soon as we unblock, and then
when we reach select() there will be nothing preventing it from waiting.
This can result in a long delay before we perform any action that
ServerLoop was supposed to have taken in response to the signal. As with
the somewhat-similar symptoms fixed by commit 893902085, the main practical
problem is slow launching of parallel workers. The window for trouble is
usually pretty short, corresponding to one iteration of ServerLoop; but
it's not negligible.
To fix, use pselect(2) in place of select(2) where available, as that's
designed to solve exactly this problem. Where not available, we continue
to use the old way, and are no worse off than before.
pselect(2) has been required by POSIX since about 2001, so most modern
platforms should have it. A bigger portability issue is that some
implementations are said to be non-atomic, ie pselect() isn't really
any different from unblock/select/reblock. Still, we're no worse off
than before on such a platform.
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point this
could be reverted, since we'd be using a self-pipe to solve the race
condition. But that's not happening before v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Tom Lane [Mon, 24 Apr 2017 17:00:23 +0000 (13:00 -0400)]
Run the postmaster's signal handlers without SA_RESTART.
The postmaster keeps signals blocked everywhere except while waiting
for something to happen in ServerLoop(). The code expects that the
select(2) will be cancelled with EINTR if an interrupt occurs; without
that, followup actions that should be performed by ServerLoop() itself
will be delayed. However, some platforms interpret the SA_RESTART
signal flag as meaning that they should restart rather than cancel
the select(2). Worse yet, some of them restart it with the original
timeout delay, meaning that a steady stream of signal interrupts can
prevent ServerLoop() from iterating at all if there are no incoming
connection requests.
Observable symptoms of this, on an affected platform such as HPUX 10,
include extremely slow parallel query startup (possibly as much as
30 seconds) and failure to update timestamps on the postmaster's sockets
and lockfiles when no new connections arrive for a long time.
We can fix this by running the postmaster's signal handlers without
SA_RESTART. That would be quite a scary change if the range of code
where signals are accepted weren't so tiny, but as it is, it seems
safe enough. (Note that postmaster children do, and must, reset all
the handlers before unblocking signals; so this change should not
affect any child process.)
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point it might
be appropriate to revert this patch. But that's not happening before
v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Tom Lane [Mon, 24 Apr 2017 16:16:58 +0000 (12:16 -0400)]
Fix postmaster's handling of fork failure for a bgworker process.
This corner case didn't behave nicely at all: the postmaster would
(partially) update its state as though the process had started
successfully, and be quite confused thereafter. Fix it to act
like the worker had crashed, instead.
In passing, refactor so that do_start_bgworker contains all the
state-change logic for bgworker launch, rather than just some of it.
Back-patch as far as 9.4. 9.3 contains similar logic, but it's just
enough different that I don't feel comfortable applying the patch
without more study; and the use of bgworkers in 9.3 was so small
that it doesn't seem worth the extra work.
transam/parallel.c is still entirely unprepared for the possibility
of bgworker startup failure, but that seems like material for a
separate patch.
Tom Lane [Mon, 24 Apr 2017 15:15:15 +0000 (11:15 -0400)]
Code review for commands/statscmds.c.
Fix machine-dependent sorting of column numbers. (Odd behavior
would only materialize for column numbers above 255, but that's
certainly legal.)
Fix poor choice of SQLSTATE for some errors, and improve error message
wording. (Notably, "is not a scalar type" is a totally misleading way
to explain "does not have a default btree opclass".)
Avoid taking AccessExclusiveLock on the associated relation during DROP
STATISTICS. That's neither necessary nor desirable, and it could easily
have put us into situations where DROP fails (compare commit 68ea2b7f9).
Andres Freund [Sun, 23 Apr 2017 23:04:46 +0000 (16:04 -0700)]
Don't include sys/poll.h anymore.
poll.h is mandated by Single Unix Spec v2, the usual baseline for
postgres on unix. None of the unixoid buildfarms animals has
sys/poll.h but not poll.h. Therefore there's not much point to test
for sys/poll.h's existence and include it optionally.
Author: Andres Freund, per suggestion from Tom Lane
Discussion: https://postgr.es/m/20505.1492723662@sss.pgh.pa.us
Andres Freund [Sun, 23 Apr 2017 22:48:31 +0000 (15:48 -0700)]
Zero padding in replication origin's checkpointed on disk-state.
This seems to be largely cosmetic, avoiding valgrind bleats and the
like. The uninitialized padding influences the CRC of the on-disk
entry, but because it's also used when verifying the CRC, that doesn't
cause spurious failures. Backpatch nonetheless.
It's a bit unfortunate that contrib/test_decoding/sql/replorigin.sql
doesn't exercise the checkpoint path, but checkpoints are fairly
expensive on weaker machines, and we'd have to stop/start for that to
be meaningful.
Author: Andres Freund
Discussion: https://postgr.es/m/20170422183123.w2jgiuxtts7qrqaq@alap3.anarazel.de
Backpatch: 9.5, where replication origins were introduced
Andres Freund [Sun, 23 Apr 2017 22:36:47 +0000 (15:36 -0700)]
Initialize all memory for logical replication relation cache.
As reported by buildfarm animal skink / valgrind, some of the
variables weren't always initialized. To avoid further mishaps use
memset to ensure the entire entry is initialized.
Author: Petr Jelinek Reported-By: Andres Freund
Discussion: https://postgr.es/m/20170422183123.w2jgiuxtts7qrqaq@alap3.anarazel.de
Backpatch: none, code new in master
Andres Freund [Sun, 23 Apr 2017 22:26:25 +0000 (15:26 -0700)]
Remove select(2) backed latch implementation.
poll(2) is required by Single Unix Spec v2, the usual baseline for
postgres (leaving windows aside). There's not been any buildfarm
animals without poll(2) for a long while, leaving the select(2)
implementation to be largely untested.
On windows, including mingw, poll() is not available, but we have a
special case implementation for windows anyway.
Author: Andres Freund
Discussion: https://postgr.es/m/20170420003611.7r2sdvehesdyiz2i@alap3.anarazel.de
Tom Lane [Sun, 23 Apr 2017 17:10:57 +0000 (13:10 -0400)]
Fix order of arguments to SubTransSetParent().
ProcessTwoPhaseBuffer (formerly StandbyRecoverPreparedTransactions)
mixed up the parent and child XIDs when calling SubTransSetParent to
record the transactions' relationship in pg_subtrans.
Remarkably, analysis by Simon Riggs suggests that this doesn't lead to
visible problems (at least, not in non-Assert builds). That might
explain why we'd not noticed it before. Nonetheless, it's surely wrong.
This code was born broken, so back-patch to all supported branches.
Andrew Dunstan [Sun, 23 Apr 2017 13:21:38 +0000 (09:21 -0400)]
Fix TAP infrastructure to support Mingw better
archive_command and restore_command need to refer to Windows paths, not
Msys virtual file system paths, as postgres is completely unaware of the
latter, so prefix them with the Windows path to the virtual file system
root. Clean psql and pg_recvlogical output of carriage returns.
Tom Lane [Sat, 22 Apr 2017 22:18:25 +0000 (18:18 -0400)]
Make PostgresNode.pm check server status more carefully.
PostgresNode blithely ignored the exit status of pg_ctl, and in general
made no effort to be sure that the server was running when it should be.
This caused it to miss server crashes, which is a serious shortcoming
in a test scaffold. Make it complain if pg_ctl fails, and modify the
start and stop logic to complain if the server doesn't start, or doesn't
stop, when expected.
Also, have it turn off the "restart_after_crash" configuration parameter
in created clusters, as bitter experience has shown that leaving that on
can mask crashes too.
We might at some point need variant functions that allow for, eg,
server start failure to be expected. But no existing test case appears
to want that, and it surely shouldn't be the default behavior.
Note that this *will* break the buildfarm, as it will expose known
bugs that the previous testing failed to. I'm committing it despite
that, to verify that we get the expected failures in the buildfarm
not just in manual testing.
Back-patch into 9.6 where PostgresNode was introduced. (The 9.6
branch is not expected to show any failures.)
Tom Lane [Sat, 22 Apr 2017 20:58:15 +0000 (16:58 -0400)]
Make PostgresNode::append_conf append a newline automatically.
Although the documentation for append_conf said clearly that it didn't
add a newline, many test authors seem to have forgotten that ... or maybe
they just consulted the example at the top of the POD documentation,
which clearly shows adding a config entry without bothering to add a
trailing newline. The worst part of that is that it works, as long as
you don't do it more than once, since the backend isn't picky about
whether config files end with newlines. So there's not a strong forcing
function reminding test authors not to do it like that. Upshot is that
this is a terribly fragile way to go about things, and there's at least
one existing test case that is demonstrably broken and not testing what
it thinks it is.
Let's just make append_conf append a newline, instead; that is clearly
way safer than the old definition.
I also cleaned up a few call sites that were unnecessarily ugly.
(I left things alone in places where it's plausible that additional
config lines would need to be added someday.)
Back-patch the change in append_conf itself to 9.6 where it was added,
as having a definitional inconsistency between branches would obviously
be pretty hazardous for back-patching TAP tests. The other changes are
just cosmetic and don't need to be back-patched.
Per buildfarm, the "#ifdef F_SETFD" removed in that commit actually
is needed on Windows, because fcntl() isn't available at all on that
platform, unless using Cygwin. We could perhaps spell it more like
"#ifdef HAVE_FCNTL", or "#ifndef WIN32", but it's not clear that
those choices are better.
It does seem that we don't need the bogus manual definition of
FD_CLOEXEC, though, so keep that change.
Peter Eisentraut [Fri, 21 Apr 2017 23:42:01 +0000 (19:42 -0400)]
doc: Update link
The reference "That is the topic of the next section." has been
incorrect since the materialized views documentation got inserted
between the section "rules-views" and "rules-update".
Tom Lane [Fri, 21 Apr 2017 19:55:56 +0000 (15:55 -0400)]
Avoid depending on non-POSIX behavior of fcntl(2).
The POSIX standard does not say that the success return value for
fcntl(F_SETFD) and fcntl(F_SETFL) is zero; it says only that it's not -1.
We had several calls that were making the stronger assumption. Adjust
them to test specifically for -1 for strict spec compliance.
The standard further leaves open the possibility that the O_NONBLOCK
flag bit is not the only active one in F_SETFL's argument. Formally,
therefore, one ought to get the current flags with F_GETFL and store
them back with only the O_NONBLOCK bit changed when trying to change
the nonblock state. In port/noblock.c, we were doing the full pushup
in pg_set_block but not in pg_set_noblock, which is just weird. Make
both of them do it properly, since they have little business making
any assumptions about the socket they're handed. The other places
where we're issuing F_SETFL are working with FDs we just got from
pipe(2), so it's reasonable to assume the FDs' properties are all
default, so I didn't bother adding F_GETFL steps there.
Also, while pg_set_block deserves some points for trying to do things
right, somebody had decided that it'd be even better to cast fcntl's
third argument to "long". Which is completely loony, because POSIX
clearly says the third argument for an F_SETFL call is "int".
Given the lack of field complaints, these missteps apparently are not
of significance on any common platforms. But they're still wrong,
so back-patch to all supported branches.
Change the on-disk format of SCRAM verifiers to conform to RFC 5803.
It doesn't make any immediate difference to PostgreSQL, but might as well
follow the standard, since one exists. (I looked at RFC 5803 earlier, but
didn't fully understand it back then.)
The new format uses Base64 instead of hex to encode StoredKey and
ServerKey, which makes the verifiers slightly smaller. Using the same
encoding for the salt and the keys also means that you only need one
encoder/decoder instead of two. Although we have code in the backend to
do both, we are talking about teaching libpq how to create SCRAM verifiers
for PQencodePassword(), and libpq doesn't currently have any code for hex
encoding.
Bump catversion, because this renders any existing SCRAM verifiers in
pg_authid invalid.
Tom Lane [Fri, 21 Apr 2017 18:48:29 +0000 (14:48 -0400)]
Remove long-obsolete catering for platforms without F_SETFD/FD_CLOEXEC.
SUSv2 mandates that <fcntl.h> provide both F_SETFD and FD_CLOEXEC,
so it seems pretty unlikely that any platforms remain without those.
Remove the #ifdef-ery installed by commit 7627b91cd to see if the
buildfarm agrees.
Extended statistics commit 7b504eb282c did not include appropriate
documentation next to where we document regular planner statistics (I
ripped what was submitted before commit and then forgot to put it back),
and while later commit 2686ee1b7ccf added some material, it structurally
depended on what I had ripped out, so the end result wasn't proper.
Fix those problems by shuffling what was added by 2686ee1b7ccf and
including some additional material, so that now chapter 14 "Performance
Tips" now describes the types of multivariate statistics we currently
have, and chapter 68 "How the Planner Uses Statistics" shows some
examples. The new text should be more in line with previous material,
in (hopefully) the appropriate depth.
While at it, fix a small bug in pg_statistic_ext docs: one column was
listed in the wrong spot.
Tom Lane [Thu, 20 Apr 2017 18:41:48 +0000 (14:41 -0400)]
Sync pg_ctl documentation and usage message with reality.
Commit 05cd12ed5 ("pg_ctl: Change default to wait for all actions")
was a tad sloppy about updating the documentation to match. The
documentation was also sorely in need of a copy-editing pass, having
been adjusted at different times by different people who took little
care to maintain consistency of style.
Prevent log_replication_commands from causing SQL commands to be logged.
Commit 7c4f524 allowed walsender to execute normal SQL commands
to support table sync feature in logical replication. Previously
while log_statement caused such SQL commands to be logged,
log_replication_commands caused them to be logged, too.
That is, such SQL commands were logged twice unexpectedly
when those settings were both enabled.
This commit forces log_replication_commands to log only replication
commands, to prevent normal SQL commands from being logged twice.
In pg_subscription, subconninfo, subslotname, subsynccommit and
subpublications are expected not to be NULL. Therefore this patch
adds BKI_FORCE_NOT_NULL markings to them.
This patch is basically unnecessary unless the code has a bug which
wrongly sets either of those columns to NULL. But it's good to have
this as a safeguard.
Don't call the function that may raise an error while holding spinlock.
It's not safe to raise an error while holding spinlock. But previously
logical replication worker for table sync called the function which
reads the system catalog and may raise an error while it's holding
spinlock. Which could lead to the trouble where spinlock will never
be released and the server gets stuck infinitely.
Author: Petr Jelinek Reviewed-by: Kyotaro Horiguchi and Fujii Masao Reported-by: Fujii Masao
Discussion: http://postgr.es/m/CAHGQGwFDWh_Qr-q_GEMpD+qH=vYPMdVqw=ZOSY3kX_Pna9R9SA@mail.gmail.com
Tom Lane [Tue, 18 Apr 2017 19:43:56 +0000 (15:43 -0400)]
Fix testing of parallel-safety of SubPlans.
is_parallel_safe() supposed that the only relevant property of a SubPlan
was the parallel safety of the referenced subplan tree. This is wrong:
the testexpr or args subtrees might contain parallel-unsafe stuff, as
demonstrated by the test case added here. However, just recursing into the
subtrees fails in a different way: we'll typically find PARAM_EXEC Params
representing the subplan's output columns in the testexpr. The previous
coding supposed that any Param must be treated as parallel-restricted, so
that a naive attempt at fixing this disabled parallel pushdown of SubPlans
altogether. We must instead determine, for any visited Param, whether it
is one that would be computed by a surrounding SubPlan node; if so, it's
safe to push down along with the SubPlan node.
We might later be able to extend this logic to cope with Params used for
correlated subplans and other cases; but that's a task for v11 or beyond.
Tom Lane [Tue, 18 Apr 2017 17:20:59 +0000 (13:20 -0400)]
Provide an error cursor for "can't call an SRF here" errors.
Since it appears that v10 is going to move the goalposts by some amount
in terms of where you can and can't invoke set-returning functions,
arrange for the executor's "set-valued function called in context that
cannot accept a set" errors to include a syntax position if possible,
pointing to the specific SRF that can't be called where it's located.
The main bit of infrastructure needed for this is to make the query source
text accessible in the executor; but it turns out that commit 4c728f382
already did that. We just need a new function executor_errposition()
modeled on parser_errposition(), and we're ready to rock.
While experimenting with this, I noted that the error position wasn't
properly reported if it occurred in a plpgsql FOR-over-query loop,
which turned out to be because SPI_cursor_open_internal wasn't providing
an error context callback during PortalStart. Fix that.
There's a whole lot more that could be done with this infrastructure
now that it's there, but this is not the right time in the development
cycle for that sort of work. Hence, resist the temptation to plaster
executor_errposition() calls everywhere ... for the moment.
A collection of small fixes for logical replication.
* Be sure to reset the launcher's pid (LogicalRepCtx->launcher_pid) to 0
even when the launcher emits an error.
* Declare ApplyLauncherWakeup() as a static function because it's called
only in launcher.c.
* Previously IsBackendPId() was used to check whether the launcher's pid
was valid. IsBackendPid() was necessary because there was the bug where
the launcher's pid was not reset to 0. But now it's fixed, so IsBackendPid()
is not necessary and this patch removes it.
Rename "scram" to "scram-sha-256" in pg_hba.conf and password_encryption.
Per discussion, plain "scram" is confusing because we actually implement
SCRAM-SHA-256 rather than the original SCRAM that uses SHA-1 as the hash
algorithm. If we add support for SCRAM-SHA-512 or some other mechanism in
the SCRAM family in the future, that would become even more confusing.
Most of the internal files and functions still use just "scram" as a
shorthand for SCRMA-SHA-256, but I did change PASSWORD_TYPE_SCRAM to
PASSWORD_TYPE_SCRAM_SHA_256, as that could potentially be used by 3rd
party extensions that hook into the password-check hook.
Michael Paquier did this in an earlier version of the SCRAM patch set
already, but I didn't include that in the version that was committed.
Simon Riggs [Tue, 18 Apr 2017 10:14:05 +0000 (11:14 +0100)]
Don’t push nextid too far forwards in recovery
Doing so allows various crash possibilities. Fix by avoiding
having PrescanPreparedTransactions() increment
ShmemVariableCache->nextXid when it has no 2PC files
Bug found by Jeff Janes, diagnosis and patch by Pavan Deolasee,
then patch re-designed for clarity and full accuracy by
Michael Paquier.
Reported-by: Jeff Janes
Author: Pavan Deolasee, Michael Paquier
Discussion: https://postgr.es/m/CAMkU=1zMLnH_i1-PVQ-biZzvNx7VcuatriquEnh7HNk6K8Ss3Q@mail.gmail.com
Peter Eisentraut [Tue, 18 Apr 2017 03:22:04 +0000 (23:22 -0400)]
Set range table for CopyFrom() in tablesync
CopyFrom() needs a range table for formatting certain errors for
constraint violations.
This changes the mechanism of how the range table is passed to the
CopyFrom() executor state. We used to generate the range table and one
entry for the relation manually inside DoCopy(). Now we use
addRangeTableEntryForRelation() to setup the range table and relation
entry for the ParseState, which is then passed down by BeginCopyFrom().
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com> Reported-by: Euler Taveira <euler@timbira.com.br>
The new catalog reused a column prefix "sta" from pg_statistic, but this
is undesirable, so change the catalog to use prefix "stx" instead.
Also, rename the column that lists enabled statistic kinds as "stxkind"
rather than "enabled".
Tighten up relation kind checks for extended statistics
We were accepting creation of extended statistics only for regular
tables, but they can usefully be created for foreign tables, partitioned
tables, and materialized views, too. Allow those cases.
While at it, make sure all the rejected cases throw a consistent error
message, and add regression tests for the whole thing.
Author: David Rowley, Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f-BmGo410bh5RSPZUvOO0LhmHL2NYmdrC_Jm8pk_FfyCA@mail.gmail.com
Tom Lane [Mon, 17 Apr 2017 19:29:00 +0000 (15:29 -0400)]
Always build a custom plan node's targetlist from the path's pathtarget.
We were applying the use_physical_tlist optimization to all relation
scan plans, even those implemented by custom scan providers. However,
that's a bad idea for a couple of reasons. The custom provider might
be unable to provide columns that it hadn't expected to be asked for
(for example, the custom scan might depend on an index-only scan).
Even more to the point, there's no good reason to suppose that this
"optimization" is a win for a custom scan; whatever the custom provider
is doing is likely not based on simply returning physical heap tuples.
(As a counterexample, if the custom scan is an interface to a column store,
demanding all columns would be a huge loss.) If it is a win, the custom
provider could make that decision for itself and insert a suitable
pathtarget into the path, anyway.
Per discussion with Dmitry Ivanov. Back-patch to 9.5 where custom scan
support was introduced. The argument that the custom provider can adjust
the behavior by changing the pathtarget only applies to 9.6+, but on
balance it seems more likely that use_physical_tlist will hurt custom
scans than help them.
Either because of a previous ALTER TABLE .. SET STATISTICS 0 or because
of being invoked with a partial column list, ANALYZE could fail to
acquire sufficient data to build extended statistics. Previously, this
would draw an ERROR and fail to collect any statistics at all (extended
and regular). Change things so that we raise a WARNING instead, and
remove a hint that was wrong in half the cases.
Reported by: David Rowley
Discussion: https://postgr.es/m/CAKJS1f9Kk0NF6Fg7TA=JUXsjpS9kX6NVu27pb5QDCpOYAvb-Og@mail.gmail.com
Tom Lane [Mon, 17 Apr 2017 03:23:44 +0000 (23:23 -0400)]
Ensure BackgroundWorker struct contents are well-defined.
Coverity complained because bgw.bgw_extra wasn't being filled in by
ApplyLauncherRegister(). The most future-proof fix is to memset the
whole BackgroundWorker struct to zeroes. While at it, let's apply the
same coding rule to other places that set up BackgroundWorker structs;
four out of five had the same or related issues.
Tom Lane [Sun, 16 Apr 2017 18:02:47 +0000 (14:02 -0400)]
Sync addRangeTableEntryForENR() with its peer functions.
addRangeTableEntryForENR had a check for pstate != NULL, which Coverity
pointed out was rather useless since it'd already dereferenced pstate
before that. More to the point, we'd established policy in commit bc93ac12c that we'd require non-NULL pstate for all addRangeTableEntryFor*
functions; this test was evidently copied-and-pasted from some older
version of one of those functions. Make it look more like the others.
In passing, make an elog message look more like the rest of the code,
too.
Tom Lane [Sat, 15 Apr 2017 21:27:38 +0000 (17:27 -0400)]
Provide a way to control SysV shmem attach address in EXEC_BACKEND builds.
In standard non-Windows builds, there's no particular reason to care what
address the kernel chooses to map the shared memory segment at. However,
when building with EXEC_BACKEND, there's a risk that the chosen address
won't be available in all child processes. Linux with ASLR enabled (which
it is by default) seems particularly at risk because it puts shmem segments
into the same area where it maps shared libraries. We can work around
that by specifying a mapping address that's outside the range where
shared libraries could get mapped. On x86_64 Linux, 0x7e0000000000
seems to work well.
This is only meant for testing/debugging purposes, so it doesn't seem
necessary to go as far as providing a GUC (or any user-visible
documentation, though we might change that later). Instead, it's just
controlled by setting an environment variable PG_SHMEM_ADDR to the
desired attach address.
Back-patch to all supported branches, since the point here is to
remove intermittent buildfarm failures on EXEC_BACKEND animals.
Owners of affected animals will need to add a suitable setting of
PG_SHMEM_ADDR to their build_env configuration.
Tom Lane [Sat, 15 Apr 2017 18:22:26 +0000 (14:22 -0400)]
Fix erroneous cross-reference in comment.
Seems to have been introduced in commit c219d9b0a. I think there indeed
was a "tupbasics.h" in some early drafts of that refactoring, but it
didn't survive into the committed version.
projects / postgresql / log