[libclang] Make sure the index_data.main_filename field is initialized
in c-index-test. index_enteredMainFile is not invoked when indexing a
module file.
Jordan Rose [Thu, 11 Oct 2012 16:10:19 +0000 (16:10 +0000)]
-Warc-repeated-use-of-weak: Don't warn on a single read followed by writes.
This is a "safe" pattern, or at least one that cannot be helped by using
a strong local variable. However, if the single read is within a loop,
it should /always/ be treated as potentially dangerous.
Jordan Rose [Thu, 11 Oct 2012 16:06:21 +0000 (16:06 +0000)]
-Warc-repeated-use-of-weak: Check messages to property accessors as well.
Previously, [foo weakProp] was not being treated the same as foo.weakProp.
Now, for every explicit message send, we check if it's a property access,
and if so, if the property is weak. Then for every assignment of a
message, we have to do the same thing again.
This is a potentially expensive increase because determining whether a
method is a property accessor requires searching through the methods it
overrides. However, without it -Warc-repeated-use-of-weak will miss cases
from people who prefer not to use dot syntax. If this turns out to be
too expensive, we can try caching the result somewhere, or even lose
precision by not checking superclass methods. The warning is off-by-default,
though.
[libclang] Improve AST serialization done by ASTUnit::Save().
The ASTUnit needs to initialize an ASTWriter at the beginning of
parsing to fully handle serialization of a translation unit that
imports modules. Do this by introducing an option to enable it, which
corresponds to CXTranslationUnit_ForSerialization on the C API side.
Douglas Gregor [Thu, 11 Oct 2012 00:51:27 +0000 (00:51 +0000)]
Remove the ASTDeserializationListener's MacroVisible() callback, which
is no longer necessary, as well as the little bit of infrastructure in
the AST writer that used it.
Douglas Gregor [Thu, 11 Oct 2012 00:46:49 +0000 (00:46 +0000)]
Deserialize macro history when we deserialize an identifier that has
macro history.
When deserializing macro history, we arrange history such that the
macros that have definitions (that haven't been #undef'd) and are
visible come at the beginning of the list, which is what the
preprocessor and other clients of Preprocessor::getMacroInfo()
expect. If additional macro definitions become visible later, they'll
be moved toward the front of the list. Note that it's possible to have
ambiguities, but we don't diagnose them yet.
There is a partially-implemented design decision here that, if a
particular identifier has been defined or #undef'd within the
translation unit, that definition (or #undef) hides any macro
definitions that come from imported modules. There's still a little
work to do to ensure that the right #undef'ing happens.
Additionally, we'll need to scope the update records for #undefs, so
they only kick in when the submodule containing that update record
becomes visible.
objective-C IRgen: When sending a method to 'super'
in a category class method, don't read 'isa' pointer. Instead,
save the desired OBJC_METACLASS_$_ClassName in
__DATA,__objc_superrefs and read that without reading any
isa pointers. // rdar://12459358
Eric Christopher [Wed, 10 Oct 2012 22:49:05 +0000 (22:49 +0000)]
Temporarily Revert "[analyzer] Treat fields of unions as having symbolic offsets."
Author: Jordan Rose <jordan_rose@apple.com>
Date: Wed Oct 10 21:31:21 2012 +0000
[analyzer] Treat fields of unions as having symbolic offsets.
This allows only one field to be active at a time in RegionStore.
This isn't quite the correct behavior for unions, but it at least
would handle the case of "value goes in, value comes out" from the
same field.
RegionStore currently has a number of places where any access to a union
results in UnknownVal being returned. However, it is clearly missing
some cases, or the original issue wouldn't have occurred. It is probably
now safe to remove those changes, but that's a potentially destabilizing
change that should wait for more thorough testing.
Jordan Rose [Wed, 10 Oct 2012 21:31:21 +0000 (21:31 +0000)]
[analyzer] Treat fields of unions as having symbolic offsets.
This allows only one field to be active at a time in RegionStore.
This isn't quite the correct behavior for unions, but it at least
would handle the case of "value goes in, value comes out" from the
same field.
RegionStore currently has a number of places where any access to a union
results in UnknownVal being returned. However, it is clearly missing
some cases, or the original issue wouldn't have occurred. It is probably
now safe to remove those changes, but that's a potentially destabilizing
change that should wait for more thorough testing.
[Doc parsing] This patch searches overridden objc/c++
methods looking for documentation on a particular base
class inherited by any method that overrides the base class.
In case of redeclaration, as when objc method is defined
in the implementation, it also looks up for documentation
in class/class extension being redeclared.
Jordan Rose [Wed, 10 Oct 2012 17:55:40 +0000 (17:55 +0000)]
[analyzer] Don't run non-path-sensitive checks on system headers...
...but do run them on user headers.
Previously, we were inconsistent here: non-path-sensitive checks on code
/bodies/ were only run in the main source file, but checks on
/declarations/ were run in /all/ headers. Neither of those is the
behavior we want.
Jordan Rose [Wed, 10 Oct 2012 16:42:54 +0000 (16:42 +0000)]
Move Sema::PropertyIfSetterOrGetter to ObjCMethodDecl::findPropertyDecl.
Then, switch users of PropertyIfSetterOrGetter and LookupPropertyDecl
(the latter by name) over to findPropertyDecl. This actually makes
-Wreceiver-is-weak a bit stronger than it was before.
Jordan Rose [Wed, 10 Oct 2012 16:42:38 +0000 (16:42 +0000)]
Change Sema::PropertyIfSetterOrGetter to make use of isPropertyAccessor.
Old algorithm:
1. See if the name looks like a getter or setter.
2. Use the name to look up a property in the current ObjCContainer
and all its protocols.
3. If the current container is an interface, also look in all categories
and superclasses (and superclass categories, and so on).
New algorithm:
1. See if the method is marked as a property accessor. If so, look through
all properties in the current container and find one that has a matching
selector.
2. Find all overrides of the method using ObjCMethodDecl's
getOverriddenMethods. This collects methods in superclasses and protocols
(as well as superclass categories, which isn't really necessary), and
checks if THEY are accessors. This part is not done recursively, since
getOverriddenMethods is already recursive.
This lets us handle getters and setters that do not match the property
names.
Jordan Rose [Wed, 10 Oct 2012 16:42:25 +0000 (16:42 +0000)]
Rename ObjCMethodDecl::isSynthesized to isPropertyAccessor.
This more accurately reflects its use: this flag is set when a method
matches the getter or setter name for a property in the same class,
and does not actually specify whether or not the definition of the method
will be synthesized (either implicitly or explicitly with @synthesize).
This renames the setter and backing field as well, and changes the
(soon-to-be-obsolete?) XML dump format to use 'property_accessor'
instead of 'synthesized'.
Chandler Carruth [Wed, 10 Oct 2012 11:29:08 +0000 (11:29 +0000)]
Apply the same fundamental fix for PR14048 as was applied for PR11905.
The issue arises when coercing to/from types of different sizes. We need
to be certain that the allocation on either end has sufficient room for
the coerced type. When it doesn't, we need to make room, copy across,
and then proceed. PR11905 handled the case of storing function arguments
back into allocas in the function prolog, this patch handles the case of
setting up the function arguments in a call expression.
This is actually significantly simpler than the fix for PR11905. It ends
up being a trivial change to create a temporary alloca when the source
is too small and memcpy across. This should preserve the compile-time
fast-isel benefits of doing gep+load sequences and avoiding FCAs.
Reviewed by Benjamin and Evgeniy (who fixed PR11905).
Bill Wendling [Wed, 10 Oct 2012 07:36:56 +0000 (07:36 +0000)]
Remove the final bits of Attributes being declared in the Attribute
namespace. Use the attribute's enum value instead. No functionality change
intended.
When indexing a module file, for the ppIncludedFile callback give
an invalid location if the location points to the synthetic buffer
for the module input.
Douglas Gregor [Tue, 9 Oct 2012 23:05:51 +0000 (23:05 +0000)]
Rework the (de-)serialization of macros, as stored in
MacroInfo*. Instead of simply dumping an offset into the current file,
give each macro definition a proper ID with all of the standard
modules-remapping facilities. Additionally, when a macro is modified
in a subsequent AST file (e.g., #undef'ing a macro loaded from another
module or from a precompiled header), provide a macro update record
rather than rewriting the entire macro definition. This gives us
greater consistency with the way we handle declarations, and ties
together macro definitions much more cleanly.
Note that we're still not actually deserializing macro history (we
never were), but it's far easy to do properly now.
The clang driver has a fairly fancy support for executing gcc instead of
clang itself. This dates back to clang's early days and while it looks like
some of it is still used (for kext for example), other parts are probably dead.
Remove the -ccc-clang-archs option and associated code. I don't think there
is any remaining setup where clang doesn't support an architecture but it can
expect an working gcc cross compiler to be available.
A nice side effect is that tests no longer need to differentiate architectures
that are included in production builds of clang and those that are not.
Move the functionality that looks for ObjC overridden methods from
ASTContext to the ObjCMethodDecl, and have the more generic
ASTContext::getOverriddenMethods() use the ObjCMethodDecl::getOverriddenMethods()
function.
Douglas Gregor [Tue, 9 Oct 2012 17:21:28 +0000 (17:21 +0000)]
When we load a function or method body from an AST file, we check
whether that function/method already has a body (loaded from some
other AST file), as introduced in r165137. Delay this check until
after the redeclaration chains have been wired up.
While I'm here, make the loading of method bodies lazy.
Douglas Gregor [Tue, 9 Oct 2012 16:01:50 +0000 (16:01 +0000)]
If a macro has been #undef'd in a precompiled header, we still need to
write out the macro history for that macro. Similarly, we need to cope
with reading a macro definition that has been #undef'd.
Take advantage of this new ability so that global code-completion
results can refer to #undef'd macros, rather than losing them
entirely. For multiply defined/#undef'd macros, we will still get the
wrong result, but it's better than getting no result.
Bill Wendling [Tue, 9 Oct 2012 07:45:26 +0000 (07:45 +0000)]
We use the enums to query whether an Attributes object has that attribute. The
opaque layer is responsible for knowing where that specific attribute is stored.
In VarDecl::getSourceRange() make sure to check that the source location
of the initializer is valid before using it.
Fixes rdar://12455002&12449015 where local variables of objc objects in ARC mode
were not annotated because of the ImplicitValueInitExpr initializer having invalid
source range, resulting in the SourceRange of the VarDecl having invalid end location.
Make Bitrig's clang understand -stdlib= correctly.
With this patch Bitrig can use a different c++ library without pain and
within the normal commandline parameters.
Original patch by David Hill, with lots of fixes and cleanup by me.
projects / clang / log