Fix #77423: parse_url() will deliver a wrong host to user
To avoid that `parse_url()` returns an erroneous host, which would be
valid for `FILTER_VALIDATE_URL`, we make sure that only userinfo which
is valid according to RFC 3986 is treated as such.
For consistency with the existing url parsing code, we use ctype
functions, although that is not necessarily correct.
Adam Seitz [Tue, 1 Dec 2020 23:40:16 +0000 (00:40 +0100)]
Fix #80384: limit read buffer size
In the case of a stream with no filters, php_stream_fill_read_buffer
only reads stream->chunk_size into the read buffer. If the stream has
filters attached, it could unnecessarily buffer a large amount of data.
With this change, php_stream_fill_read_buffer only proceeds until either
the requested size or stream->chunk_size is available in the read buffer.
Co-authored-by: Christoph M. Becker <cmbecker69@gmx.de>
Closes GH-6444.
Nikita Popov [Wed, 16 Dec 2020 11:12:06 +0000 (12:12 +0100)]
MySQLnd: Support cursors in store/get result
This fixes two related issues:
1. When a PS with cursor is used in store_result/get_result,
perform a COM_FETCH with maximum number of rows rather than
silently switching to an unbuffered result set (in the case of
store_result) or erroring (in the case of get_result).
In the future, we might want to make get_result unbuffered for
PS with cursors, as using cursors with buffered result sets
doesn't really make sense. Unlike store_result, get_result
isn't very explicit about what kind of result set is desired.
2. If the client did not request a cursor, but the server reports
that a cursor exists, ignore this and treat the PS as if it
has no cursor (i.e. to not use COM_FETCH). It appears to be a
server side bug that a cursor used inside an SP will be reported
to the client, even though the client cannot use the cursor.
Nikita Popov [Wed, 16 Dec 2020 09:16:50 +0000 (10:16 +0100)]
Fix bug #80523
Don't truncate the file length to unsigned int...
I have no idea whether that fully fixes the problem because the
process gets OOM killed before finishing, but at least the
immediate parse error is gone now.
Calvin Buckley [Thu, 10 Dec 2020 18:25:32 +0000 (14:25 -0400)]
IBM i PASE doesn't support ITIMER_PROF
Like Cygwin, this platform needs to use a real-time timer.
This was based on a patch by @kadler, but it didn't handle unsetting
the timer, so the timeout would continue to be active, triggering
`hard_timeout` unexpectedly. The patch is fixed to handle unsetting.
Like the test title and some comments in this test describe, this test
was supposed to have `::prepare()` failing because `LOAD DATA INFILE`
would not be supported as prepared statement, and then the test checks
whether follow-up queries would succeed. However, `LOAD DATA INFILE`
is supported for prepared statements at least on Windows with mysqlnd,
so the test does no longer test what it is supposed to do. Therefore,
we drop it.
Nikita Popov [Thu, 10 Dec 2020 10:21:06 +0000 (11:21 +0100)]
Fixed bug #76815
When we receive an error while reading a result set, we should
assume that no more result sets are available. libmysqlclient
implements the same behavior.
When `php_zlib_deflate_filter()` is called with `PSFS_FLAG_FLUSH_INC`
but without new buckets being available (e.g. because a user calls
`rewind()` after writing to the stream), we have to make sure that any
pending data are flushed. This could basically be done like in the
attached patch[1], but that could cause unnessary flushes, which can be
harmful for compression, and adds unnecessary flush markers to the
stream. Thus, we use the `php_zlib_filter_data.finished` field, which
has not been used for `zlib.deflate` filters, and properly keep track
of the need to flush.
Fix #77069: stream filter loses final block of data
Reading from a stream may return greater than zero, but nonetheless the
stream's EOF flag may have been set. We have to cater to this
condition by setting the close flag for filters.
We also have to cater to that change in the zlib.inflate filter:
If `inflate()` is called with flush mode `Z_FINISH`, but the output
buffer is not large enough to inflate all available data, it fails with
`Z_BUF_ERROR`. However, `Z_BUF_ERROR` is not fatal; in fact, the zlib
manual states: "If deflate returns with Z_OK or Z_BUF_ERROR, this
function must be called again with Z_FINISH and more output space
(updated avail_out) but no more input data, until it returns with
Z_STREAM_END or an error." Hence, we do so.
Fix #75102: `PharData` says invalid checksum for valid tar
Apparently, there are broken tarballs out there which are actually in
ustar format, but did not write the `ustar` marker. Since popular tar
tools like GNU tar and 7zip have no issues dealing with such tarballs,
Phar should also be more resilient.
Thus, when the first checksum check of a tarball in (presumed) in old-
style format fails, we check whether the checksum would be suitable for
ustar format; if so, we treat the tarball as being in ustar format.
Daniel Black [Wed, 2 Dec 2020 21:39:08 +0000 (08:39 +1100)]
Fix mysqli_expire_password test for mariadb
In MariaDB-10.4.3 EXPIRE passwords where supported for
MariaDB. This only behaves like MySQL when the system
variable disconnect_on_expired_passwords=1.
MariaDB if there was no password it could not be considered
expired. So the test is adjusted to use actual passwords.
(MariaDB commit a94b20a8e0d9e64eeaabdaaa7a3e03fcdb8a686e)
The error codes produced my MariaDB are different
however still conforming to the SQL specification.
Phar signatures practically are of limited size; for the MD5 and SHA
hashes the size is fixed (at most 64 bytes for SHA512); for OpenSSL
public keys there is no size limit in theory, but "64 KiB ought to be
good enough for anybody". So we check for that limit, to avoid fatal
errors due to out of memory conditions.
Since it is neither possible to have the signature compressed in the
ZIP archive, nor is it possible to manually add a signature via Phar,
we use ZipArchive to create a suitable archive for the test on the fly.
Nikita Popov [Mon, 30 Nov 2020 14:15:59 +0000 (15:15 +0100)]
Next attempt to fix bug #80368
Apparently treating LibreSSL as OpenSSL 1.1 is not just something
we did in our code, it's something that upstream LibreSSL claims,
despite not actually being compatible. Duh.
Check for EVP_CIPH_OCB_MODE instead, which should reliably
determine support...
Nikita Popov [Fri, 27 Nov 2020 10:54:39 +0000 (11:54 +0100)]
Fix AVX detection
Our CPU detection code currently only checks whether hardware
support for AVX exists. However, we also need to check for operating
system support for XSAVE, as well as whether XCR0 has the SSE and
AVX bits set.
If this is not the case, unset the AVX and AVX2 bits in the cpuinfo
structure.
Hopefully this resolves our issues with CPU support detection.
As the alternate path in this test covers all supported MySQL and MariaDB
versions and a signifant portion of unsupported versions lets keep it simple.
Nikita Popov [Fri, 27 Nov 2020 09:02:00 +0000 (10:02 +0100)]
Fixed bug #80425
Rename the methods in MessageFormatAdapter to make sure they don't
clash with anything defined by icu itself, which may be a problem
if icu is linked statically.
Nikita Popov [Tue, 24 Nov 2020 11:23:03 +0000 (12:23 +0100)]
Fix bug #80402: Don't strip -lpthread
The current behavior has been introduced 20 years ago in f9e375f493a1aeacbbcc8f2f00880d05b4ba7aaf as part of a larger change.
It's not clear to me why special treatement of -lpthread is necessary
here.
Nikita Popov [Wed, 25 Nov 2020 14:57:11 +0000 (15:57 +0100)]
Reindent ext/mysqli tests
Reindent ext/mysqli tests on PHP-7.4, so they match with the
indentation on PHP-8.0. Otherwise merging test changes across
branches is very unpleasant.
Fix #72964: White space not unfolded for CC/Bcc headers
`\r\n` does only terminate a header, if not followed by `\t` or ` `.
We have to cater to that when determining the end position of the
respective headers.
Fix #80345: PHPIZE configuration has outdated PHP_RELEASE_VERSION
We must not redefine the version "constants" for phpize builds, because
these have already generated in phpize.js, from where we pass these
variables forward to configure.js.
We also add `PHP_EXTRA_VERSION` and `PHP_VERSION_STRING` to the files
for completeness.
Nikita Popov [Tue, 17 Nov 2020 09:18:37 +0000 (10:18 +0100)]
Fix incorrectly optimized out live range
For x ? y : z style structures, the live range starts at z, but
may also hold the value of y. Make sure that the refcounting check
takes this into account, by checking the type of a potential phi
user.
Fix #74558: Can't rebind closure returned by Closure::fromCallable()
Failure to rebind such closures is not necessarily related to them
being created by `ReflectionFunctionAbstract::getClosure()`, so we fix
the error message.
Fix #80266: parse_url silently drops port number 0
As of commit 81b2f3e[1], `parse_url()` accepts URLs with a zero port,
but does not report that port, what is wrong in hindsight.
Since the port number is stored as `unsigned short` there is no way to
distinguish between port zero and no port. For BC reasons, we thus
introduce `parse_url_ex2()` which accepts an output parameter that
allows that distinction, and use the new function to fix the behavior.
The introduction of `parse_url_ex2()` has been suggested by Nikita.
Fix bug #72413: Segfault with get_result and PS cursors
We cannot simply switch to use_result here, because the fetch_row
methods in get_result mode and in use_result/store_result mode
are different: In one case it accepts a statement, in the other
a return value zval. Thus, doing a switch to use_result results
in a segfault when trying to fetch a row.
Actually supporting get_result with cursors would require adding
cursor support in mysqlnd_result, not just mysqlnd_ps. That would
be a significant amount of effort and, given the age of the issue,
does not appear to be particularly likely to happen soon.
As such, we simply generate an error when using get_result()
with cursors, which is much better than causing a segfault.
Instead, parameter binding needs to be used.
Nikita Popov [Thu, 29 Oct 2020 13:07:08 +0000 (14:07 +0100)]
Handle errors during PDO row fetch
The EOF flag also gets set on error, so we always end up ignoring
errors here.
However, we should only check errors for unbuffered results. For
buffered results, this function is guaranteed not to error, and
querying the errno may return an unrelated error.
Fix #44618: Fetching may rely on uninitialized data
Unless `SQLGetData()` returns `SQL_SUCCESS` or `SQL_SUCCESS_WITH_INFO`,
the `StrLen_or_IndPtr` output argument is not guaranteed to be properly
set. Thus we handle retrieval failure other than `SQL_ERROR` by
yielding `false` for those column values and raising a warning.
Nikita Popov [Wed, 28 Oct 2020 16:12:35 +0000 (17:12 +0100)]
Fixed bug #65825
Set error_info when we fail to read a packet, instead of throwing
a warning. Additionally we also need to populate the right
error_info in rowp_read -- we'll later take the error from the
packet, not the connection.
No test case, as this is hard to reliably test. I'm using the
test case from:
https://github.com/php/php-src/pull/2131#issuecomment-538374838
projects / php / log