PR 31534: When emitting both DWARF unwind tables and debug information,
do not use .cfi_sections. This requires checking if any non-declaration
function in the module needs an unwind table.
[LICM] Allow promotion of some stores that are not guaranteed to execute.
Promotion is always legal when a store within the loop is guaranteed to execute.
However, this is not a necessary condition - for promotion to be memory model
semantics-preserving, it is enough to have a store that dominates every exit
block. This is because if the store dominates every exit block, the fact the
exit block was executed implies the original store was executed as well.
Matthias Braun [Thu, 5 Jan 2017 20:01:19 +0000 (20:01 +0000)]
CodeGen: Assert that liveness is up to date when reading block live-ins.
Add an assert that checks whether liveins are up to date before they are
used.
- Do not print liveins into .mir files anymore in situations where they
are out of date anyway.
- The assert in the RegisterScavenger is superseded by the new one in
livein_begin().
- Skip parts of the liveness updating logic in IfConversion.cpp when
liveness isn't tracked anymore (just enough to avoid hitting the new
assert()).
lib/Target/AMDGPU/AsmParser/AMDGPUAsmParser.cpp:1638:12: error: could not convert ‘(const unsigned int*)(& Variants)’ from ‘const unsigned int*’ to ‘llvm::ArrayRef<unsigned int>’
return Variants;
Zvi Rackover [Thu, 5 Jan 2017 15:11:43 +0000 (15:11 +0000)]
[X86] Optimize vector shifts with variable but uniform shift amounts
Summary:
For instructions such as PSLLW/PSLLD/PSLLQ a variable shift amount may be passed in an XMM register.
The lower 64-bits of the register are evaluated to determine the shift amount.
This patch improves the construction of the vector containing the shift amount.
Teresa Johnson [Thu, 5 Jan 2017 14:59:56 +0000 (14:59 +0000)]
[ThinLTO] Use DenseSet instead of SmallPtrSet for holding GUIDs
Should fix some more bot failures from r291108.
This should have been a DenseSet, since GUID is not a pointer type.
It caused some bots to fail, but for some reason I wasnt't getting a
build failure.
Teresa Johnson [Thu, 5 Jan 2017 14:32:16 +0000 (14:32 +0000)]
[ThinLTO] Subsume all importing checks into a single flag
Summary:
This adds a new summary flag NotEligibleToImport that subsumes
several existing flags (NoRename, HasInlineAsmMaybeReferencingInternal
and IsNotViableToInline). It also subsumes the checking of references
on the summary that was being done during the thin link by
eligibleForImport() for each candidate. It is much more efficient to
do that checking once during the per-module summary build and record
it in the summary.
Currently isLikelyComplexAddressComputation tries to figure out if the given stride seems to be 'complex' and need some extra cost for address computation handling.
This code seems to be target dependent which may not be the same for all targets.
Passed the decision whether the given stride is complex or not to the target by sending stride information via SCEV to getAddressComputationCost instead of 'IsComplex'.
Specifically at X86 targets we dont see any significant address computation cost in case of the strided access in general.
Kristof Beyls [Thu, 5 Jan 2017 13:27:52 +0000 (13:27 +0000)]
[GlobalISel] Add support for address-taken basic blocks
To make this work, pointers from the MachineBasicBlock to the LLVM-IR-level
basic blocks need to be initialized, as the AsmPrinter uses this link to be
able to print out labels for the basic blocks that are address-taken.
Most of the changes in this commit are about adapting existing tests to include
the basic block name that is now printed out in the MIR format, now that the
name becomes available as the link to the LLVM-IR basic block is initialized.
The relevant test change for the functionality added in this patch are the
added "(address-taken)" strings in
test/CodeGen/AArch64/GlobalISel/arm64-irtranslator.ll.
Kristof Beyls [Thu, 5 Jan 2017 11:28:51 +0000 (11:28 +0000)]
[GlobalISel] Add support for switch statements
This commit does this using a trivial chain of conditional branches. In the
future, we probably want to reuse the optimized switch lowering used in
SelectionDAG.
Craig Topper [Thu, 5 Jan 2017 05:47:29 +0000 (05:47 +0000)]
[X86] Change getHostCPUName to report Intel model 0x4e as "skylake" instead of "skylake-avx512". Add the proper 0x55 model for "skylake-avx512".
Summary:
Intel's i5-6300U CPU is reporting to have a model id of 78 (4e).
The Host detection assumes that to be Skylake Xeon (with AVX512 support),
instead of a normal Skylake machine.
IR: Module summary representation for type identifiers; summary test scaffolding for lowertypetests.
Set up basic YAML I/O support for module summaries, plumb the summary into
the pass and add a few command line flags to test YAML I/O support. Bitcode
support to come separately, as will the code in LowerTypeTests that actually
uses the summary. Also add a couple of tests that pass by virtue of the pass
doing nothing with the summary (which happens to be the correct thing to do
for those tests).
[gtest] Work around broken installs of libc++ where we don't have
a cxxabi.h in the include search paths.
This comes up when libc++ is installed with some other abi library. At
some points in time in history we have had CMake hackery to try and get
a cxxabi.h installed that would work, but there are lots of examples
lacking this. Also, the just-built tree with libc++ seems to not quite
get this right.
To let folks make progress, we can easily work around this by detecting
that the header is missing and disabling the relevant parts of gtest.
This should fix the last remainging build bot failures. While these
failures are typically indicative of a questionable install, I don't
think gtest should be the thing that surfaces those issues and I don't
want folks blocked on this.
Justin Lebar [Thu, 5 Jan 2017 00:12:51 +0000 (00:12 +0000)]
[PM] Edit comments in PassManager.h.
Summary:
This covers most of PassManager.h, up to the introduction of inner/outer
analysis proxies.
If there's a theme to these changes, it's simplifying the language. For
example:
* PreservedAnalyses is a "set of analyses", not an "abstract set".
"Abstract" doesn't have any particular meaning here.
* "Build types for the concept types" becomes "define the concept types".
* Instead of "data structures optimized for pointer-like types using
the alignment-provided low bits", say "data structures that use the
low bits of pointers."
* "Clear the map pointing into the results list" becomes
"Delete the map entries that point into the results list."
This patch also fixes a few places where we referred to "function" and
"module" pass/analysis managers, instead of the more abstract "IRUnitT"
PM/AMs we have now.
Wolfgang Pieb [Wed, 4 Jan 2017 23:58:26 +0000 (23:58 +0000)]
[DWARF] Null out the debug locs of load instructions that have been moved by GVN
performing partial redundancy elimination (PRE). Not doing so can cause jumpy line
tables and confusing (though correct) source attributions.
[gtest] Fix the way we disable a warning for unittests.
I somehow wrote this fix and then lost it prior to commit. Really sorry
about the noise. This should fix some issues with hacking add_definition
to do things with warning flags.
Mehdi Amini [Wed, 4 Jan 2017 22:54:33 +0000 (22:54 +0000)]
Use lazy-loading of Metadata in MetadataLoader when importing is enabled (NFC)
Summary:
This is a relatively simple scheme: we use the index emitted in the
bitcode to avoid loading all the global metadata. Instead we load
the index with their position in the bitcode so that we can load each
of them individually. Materializing the global metadata block in this
condition only triggers loading the named metadata, and the ones
referenced from there (transitively). When materializing a function,
metadata from the global block are loaded lazily as they are
referenced.
Two main current limitations are:
1) Global values other than functions are not materialized on demand,
so we need to eagerly load METADATA_GLOBAL_DECL_ATTACHMENT records
(and their transitive dependencies).
2) When we load a single metadata, we don't recurse on the operands,
instead we use a placeholder or a temporary metadata. Unfortunately
tepmorary nodes are very expensive. This is why we don't have it
always enabled and only for importing.
These two limitations can be lifted in a subsequent improvement if
needed.
With this change, the total link time of opt with ThinLTO and Debug
Info enabled is going down from 282s to 224s (~20%).
David Blaikie [Wed, 4 Jan 2017 22:36:33 +0000 (22:36 +0000)]
Reapply "Make BitCodeAbbrev ownership explicit using shared_ptr rather than IntrusiveRefCntPtr""
If this is a problem for anyone (shared_ptr is two pointers in size,
whereas IntrusiveRefCntPtr is 1 - and the ref count control block that
make_shared adds is probably larger than the one int in RefCountedBase)
I'd prefer to address this by adding a lower-overhead version of
shared_ptr (possibly refactoring IntrusiveRefCntPtr into such a thing)
to avoid the intrusiveness - this allows memory ownership to remain
orthogonal to types and at least to me, seems to make code easier to
understand (since no implicit ownership acquisition can happen).
Tim Shen [Wed, 4 Jan 2017 22:11:42 +0000 (22:11 +0000)]
[Legalizer] Fix fp-to-uint to fp-tosint promotion assertion.
Summary:
When promoting fp-to-uint16 to fp-to-sint32, the result is actually zero
extended. For example, given double 65534.0, without legalization:
fp-to-uint16: 65534.0 -> 0xfffe
With the legalization:
fp-to-sint32: 65534.0 -> 0x0000fffe
Without this patch, legalization wrongly emits a signed extend assertion,
which is consumed by later icmp instruction, and cause miscompile.
Note that the floating point value must be in [0, 65535), otherwise the
behavior is undefined.
This patch reverts r279223 behavior and adds more tests and
documentations.
In PR29041's context, James Molloy mentioned that:
We don't need to mask because conversion from float->uint8_t is
undefined if the integer part of the float value is not representable in
uint8_t. Therefore we can assume this doesn't happen!
which is totally true and good, because fptoui is documented clearly to
have undefined behavior when overflow/underflow happens. We should take
the advantage of this behavior so that we can save unnecessary mask
instructions.
David Blaikie [Wed, 4 Jan 2017 21:13:35 +0000 (21:13 +0000)]
Make BitCodeAbbrev ownership explicit using shared_ptr rather than IntrusiveRefCntPtr
If this is a problem for anyone (shared_ptr is two pointers in size,
whereas IntrusiveRefCntPtr is 1 - and the ref count control block that
make_shared adds is probably larger than the one int in RefCountedBase)
I'd prefer to address this by adding a lower-overhead version of
shared_ptr (possibly refactoring IntrusiveRefCntPtr into such a thing)
to avoid the intrusiveness - this allows memory ownership to remain
orthogonal to types and at least to me, seems to make code easier to
understand (since no implicit ownership acquisition can happen).
Hal Finkel [Wed, 4 Jan 2017 21:05:13 +0000 (21:05 +0000)]
[PowerPC] Fix logic dealing with nop after calls (and tail-call eligibility)
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. Unfortunately, because of the way
that the ABI works, we need to generate code as if we supported interposition
whenever the linker might insert stubs for the purpose of supporting it.
David Blaikie [Wed, 4 Jan 2017 18:57:31 +0000 (18:57 +0000)]
ADT: IntrusiveRefCntPtr: Broaden the definition of correct usage of RefCountedBase
This roughly matches the semantics of std::enable_shared_from_this - that it
does not dictate the ownership model of all users, but constrains those users
taking advantage of the intrusive nature to do so only when there's a guarantee
that that's the ownership model being used for the object being passed.
Tobias Grosser [Wed, 4 Jan 2017 17:50:15 +0000 (17:50 +0000)]
RegionInfo: add new test case
This test case has been reduced from test/Analysis/RegionInfo/mix_1.ll and
provides us with a minimal example of a test case which caused problems while
working on an improved version of the RegionInfo analysis. We upstream this
test case, as it certainly can be helpful in future debugging and optimization
tests.
Test case reduced by Pratik Bhatu <cs12b1010@iith.ac.in>
Robert Lougher [Wed, 4 Jan 2017 17:40:32 +0000 (17:40 +0000)]
Reapply "[SimplifyCFG] In sinkLastInstruction correctly set debugloc of common inst"
This reapplies r289828 (reverted in r289833 as it broke the address sanitizer). The
debugloc is now only set when the instruction is not a call, as this causes the
verifier to assert (the inliner requires an inlinable callsite to have a debug loc
if the caller and callee have debug info).
Original commit message:
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.
Teresa Johnson [Wed, 4 Jan 2017 14:27:31 +0000 (14:27 +0000)]
[ThinLTO] Rework llvm-link to use the FunctionImporter
Summary:
Change llvm-link to use the FunctionImporter handling, instead of
manually invoking the Linker. We still need to load the module
in llvm-link to do the desired testing for invalid import requests
(weak functions), and to get the GUID (in case the function is local).
Also change the drop-debug-info test to use llvm-link so that importing
is forced (in order to test debug info handling) and independent of
import logic changes.
[ADT] Speculative attempt to fix build bot issues with r290952.
This just removes the usage of llvm::reverse and llvm::seq. That makes
it harder to handle the empty case correctly and so I've also added
a test there.
This is just a shot in the dark at what might be behind the buildbot
failures. I can't reproduce any issues locally including with ASan...
I feel like I'm missing something...
projects / llvm / log