John McCall [Fri, 25 Jan 2013 22:31:03 +0000 (22:31 +0000)]
The standard ARM C++ ABI dictates that inline functions are
never key functions. We did not implement that rule for the
iOS ABI, which was driven by what was implemented in gcc-4.2.
However, implement it now for other ARM-based platforms.
Douglas Gregor [Fri, 25 Jan 2013 22:25:23 +0000 (22:25 +0000)]
Optimize ModuleManager::visit() by precomputing the visitation order
and limiting ourselves to two memory allocations. 10% speedup in
-fsyntax-only time for modules.
With this change, we can actually see some performance different from
the global module index, but it's still about 1%.
This changes one ObjC test, but AFAICT this is not according to any
style guide (neither before nor after). We probably should be aligning
on the ":" there according to:
http://google-styleguide.googlecode.com/svn/trunk/objcguide.xml?showone=Method_Invocations#Method_Invocations
NAKAMURA Takumi [Fri, 25 Jan 2013 05:58:53 +0000 (05:58 +0000)]
clang/test/CodeGenCXX/debug-info-static-member.cpp: Appease targetting msvc to add explicit -target x86_64-unknown-unknown.
with -target i686-win32, you will see;
debug-info-static-member.cpp:11:22: error: in-class initializer for static data member of type 'const float' requires 'constexpr' specifier [-Wstatic-float-init]
const static float const_b = 3.14;
^ ~~~~
constexpr
Richard Smith [Fri, 25 Jan 2013 04:22:16 +0000 (04:22 +0000)]
Sync 'in class initialization of static const double' extension up with GCC,
and split it out of -Wgnu into its own warning flag.
* In C++11, this is now a hard error (GCC has no extension here in C++11 mode).
The error can be disabled with -Wno-static-float-init, and has a fixit to
add 'constexpr'.
* In C++98, this is still an ExtWarn, but is now controlled by
-Wstatic-float-init as well as -Wgnu.
Douglas Gregor [Fri, 25 Jan 2013 01:03:03 +0000 (01:03 +0000)]
Implement the reader of the global module index and wire it into the
AST reader.
The global module index tracks all of the identifiers known to a set
of module files. Lookup of those identifiers looks first in the global
module index, which returns the set of module files in which that
identifier can be found. The AST reader only needs to look into those
module files and any module files not known to the global index (e.g.,
because they were (re)built after the global index), reducing the
number of on-disk hash tables to visit. For an example source I'm
looking at, we go from 237844 total identifier lookups into on-disk
hash tables down to 126817.
Unfortunately, this does not translate into a performance advantage.
At best, it's a wash once the global module index has been built, but
that's ignore the cost of building the global module index (which
is itself fairly large). Profiles show that the global module index
code is far less efficient than it should be; optimizing it might give
enough of an advantage to justify its continued inclusion.
Douglas Gregor [Fri, 25 Jan 2013 00:45:27 +0000 (00:45 +0000)]
Rename the -cc1 option "-generate-module-index" to
"-fmodules-global-index" and expand its behavior to include both the
use and generation of the global module index.
Richard Smith [Fri, 25 Jan 2013 00:08:28 +0000 (00:08 +0000)]
Clean up: since we have FunctionDecl::IsInline, make it store the right value
for template instantiations, and use it to simplify the implementation of
FunctionDecl::isInlined().
This incidentally changes the result of isInlined on a declared-but-not-defined
non-inline member function from true to false. This is sort of a bug fix, but
currently isInlined is only called on function definitions, so it has no visible
effects.
The idea is to introduce a higher level "user mode" option for
different use scenarios. For example, if one wants to run the analyzer
for a small project each time the code is built, they would use
the "shallow" mode.
The user mode option will influence the default settings for the
lower-level analyzer options. For now, this just influences the ipa
modes, but we plan to find more optimal settings for them.
Anna Zaks [Thu, 24 Jan 2013 23:15:30 +0000 (23:15 +0000)]
[analyzer] Replace "-analyzer-ipa" with "-analyzer-config ipa".
The idea is to eventually place all analyzer options under
"analyzer-config". In addition, this lays the ground for introduction of
a high-level analyzer mode option, which will influence the
default setting for IPAMode.
Jordan Rose [Thu, 24 Jan 2013 23:07:59 +0000 (23:07 +0000)]
scan-build: Add a --keep-empty option for better testing.
SATestBuild expects to compare output directories for each invocation of
scan-build that it runs, but scan-build clears out empty directories by
default. We were coincidentally not getting that behavior until r173294.
Jordan Rose [Thu, 24 Jan 2013 20:50:46 +0000 (20:50 +0000)]
Handle universal character names and Unicode characters outside of literals.
This is a missing piece for C99 conformance.
This patch handles UCNs by adding a '\\' case to LexTokenInternal and
LexIdentifier -- if we see a backslash, we tentatively try to read in a UCN.
If the UCN is not syntactically well-formed, we fall back to the old
treatment: a backslash followed by an identifier beginning with 'u' (or 'U').
Because the spelling of an identifier with UCNs still has the UCN in it, we
need to convert that to UTF-8 in Preprocessor::LookUpIdentifierInfo.
Of course, valid code that does *not* use UCNs will see only a very minimal
performance hit (checks after each identifier for non-ASCII characters,
checks when converting raw_identifiers to identifiers that they do not
contain UCNs, and checks when getting the spelling of an identifier that it
does not contain a UCN).
This patch also adds basic support for actual UTF-8 in the source. This is
treated almost exactly the same as UCNs except that we consider stray
Unicode characters to be mistakes and offer a fixit to remove them.
Chad Rosier [Thu, 24 Jan 2013 20:33:35 +0000 (20:33 +0000)]
Temporarily XFAIL this test; the compiler will segfault if the target-specific
parser is not included in the compiler. Thanks to Renato for discovering the
underlying issue.
Chad Rosier [Thu, 24 Jan 2013 19:14:47 +0000 (19:14 +0000)]
[driver] Associate a JobAction with each result file. This enables the driver
to delete result files for only those commands that fail.
Part of rdar://12984531
Michael Han [Thu, 24 Jan 2013 16:46:58 +0000 (16:46 +0000)]
PR14922: when printing an attribute, use the real syntax of the attribute (GNU, C++11, MS Declspec) instead of hardcoded GNU syntax.
Introduce a spelling index to Attr class, which is an index into the attribute spelling list of an attribute defined in Attr.td.
This index will determine the actual spelling used by an attribute, as it incorporates both the syntax and naming of the attribute.
When constructing an attribute AST node, the spelling index is computed based on attribute kind, scope (if it's a C++11 attribute), and
name, then passed to Attr that will use the index to print itself.
Joey Gouly [Thu, 24 Jan 2013 15:14:22 +0000 (15:14 +0000)]
Fix an OpenCL test case that was OpenCL conformant.
It had program scope variables that were not in the constant address space,
make them to be function scope variables instead.
Also move the test to the SemaOpenCL directory.
Richard Smith [Wed, 23 Jan 2013 23:38:20 +0000 (23:38 +0000)]
Micro cleanup: use an array of const char, rather than an array of char, as the
type of the string literal implicitly used for a raw user-defined literal call.
No test; this has no semantic impact.
Bill Wendling [Wed, 23 Jan 2013 23:04:29 +0000 (23:04 +0000)]
The diagnostic is now a warning instead of an error. Also don't check lines beginning with '#', since they could contain a path with the unexpected word in them.
Douglas Gregor [Wed, 23 Jan 2013 22:38:11 +0000 (22:38 +0000)]
Implement the writer side of the global module index.
The global module index is a "global" index for all of the module
files within a particular subdirectory in the module cache, which
keeps track of all of the "interesting" identifiers and selectors
known in each of the module files. One can perform a fast lookup in
the index to determine which module files will have more information
about entities with a particular name/selector. This information can
help eliminate redundant lookups into module files (a serious
performance problem) and help with creating auto-import/auto-include
Fix-Its.
The global module index is created or updated at the end of a
translation unit that has triggered a (re)build of a module by
scraping all of the .pcm files out of the module cache subdirectory,
so it catches everything. As with module rebuilds, we use the file
system's atomicity to synchronize.
Dmitri Gribenko [Wed, 23 Jan 2013 20:02:51 +0000 (20:02 +0000)]
Implement -Wvla correctly
GCC implements -Wvla as "warn on every VLA" (this is useful to find every VLA,
for example, if they are forbidden by coding guidelines). Currently Clang
implements -Wvla as "warn on VLA when it is an extension".
The attached patch makes our behavior match GCC. The existing vla extwarn is
moved under -Wvla-extension and is still included into -Wgnu.
Douglas Gregor [Wed, 23 Jan 2013 18:53:14 +0000 (18:53 +0000)]
Factor the trait for lookup into the on-based hash table of
identifiers into two parts: the part that involves dealing with the
key (which can be re-used) and the ASTReader-specific part that
creates the IdentifierInfos. While I'm at it, StringRef'ify this code,
which was using pair<const char*, unsigned>. No functionality change.
The other indentation was a nice attempt but doesn't work in many cases.
Not sure what the right long term solution is as the "After: " is still
not nice. We either need to figure out what to do in the cases where it
"doesn't work" or come up with a third solution, e.g. falling back to:
projects / clang / log