Michel Piquemal [Thu, 22 Apr 2021 17:47:51 +0000 (19:47 +0200)]
brcm: add missing symlink for Pi Zero W NVRAM file
On 21/04/2021 13:23, Josh Boyer wrote:
> On Mon, Apr 19, 2021 at 1:38 PM Michel Piquemal <spam@ipik.org> wrote:
>>
>> Raspberry Pi Zero W has no NVRAM files specified and dmesg reports the
>> following error at boot:
>> brcmfmac mmc1:0001:1: Direct firmware load for
>> brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
>>
>> Pi Zero W uses same wifi BCM43430 module than Pi 3 model B:
>> symlinking to that Pi 3b NVRAM file fixes the issue, and wifi works as
>> expected.
>>
> Your patch is corrupted and doesn't apply. Please update your local
> tree to the latest in git and resend.
>
> josh
>
Hi. Apologies it got mangled by mail client; here it is again:
Signed-off-by: Michel Piquemal <spam@ipik.org> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Petr Machata [Tue, 6 Apr 2021 16:15:39 +0000 (18:15 +0200)]
Mellanox: Add new mlxsw_spectrum firmware xx.2008.2438
Add latest verified version of Mellanox Spectrum-family switch firmware,
for Spectrum (13.2008.2438), Spectrum-2 (29.2008.2438) and Spectrum-3
(30.2008.2438).
This update fixes the following issues:
- An issue where strictly-prioritized traffic gets a 9usec latency penalty
on a congested port.
- Attempts to configure DSCP prioritization (QPDM register) on CPU
port (local port 0) would result in FW crash.
- An issue in sampling traffic to the CPU due to incorrect trap
prioritization.
- An issue in bulk-reading flow counters.
- Several issues related to FW upgrade and in-service FW upgrade.
- Incomplete clearing of activity bits in ECMP containers with a very high
number of individual ECMP entries (100K).
- A crash during router deinit.
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Jeremy Linton [Thu, 8 Apr 2021 03:25:54 +0000 (22:25 -0500)]
brcm: Link CM4's WiFi firmware with DMI machine name.
The kernel when booted in ACPI mode with SMBIOS/DMI
data uses the DMI data to set the machine
manufacture/model.
The WiFi driver uses the machine string to select the
correct firmware image. Because of this, an additional
link to select the correct firmware is needed.
Cc: Hans de Goede <hdegoede@redhat.com> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Josh Boyer <jwboyer@kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
WHENCE: link to similar config file for rtl8821a support
linux-firmware ships no config file for rtl8821a, as it seems
quite similar to rtl8821c add symlink to that config file
see https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784835
(Maintainers may replace with proper file).
fixes: https://bugs.debian.org/893912
-- error
[ 2.574742] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_config.bin
[ 2.575137] bluetooth hci0: firmware: failed to load
rtl_bt/rtl8821a_config.bin (-2)
[ 2.575143] bluetooth hci0: Direct firmware load for
rtl_bt/rtl8821a_config.bin failed with error -2
[ 2.575145] Bluetooth: hci0: Failed to load rtl_bt/rtl8821a_config.bin
--
Louis Peens [Wed, 7 Apr 2021 04:59:44 +0000 (06:59 +0200)]
nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.14.A.6
New in this release:
- Support for ipv6 tunneling
- Handling of QinQ matching/actions
Improvements:
- Fix for performance regression under overload conditions
- Better handling of tunnel flow-merge cases
- Fix performance regression when tso is enabled with ipv6 traffic
Signed-off-by: Louis Peens <louis.peens@netronome.com> Tested-by: Charles Murcott <charles.murcott@netronome.com> Reviewed-by: Heinrich Kuhn <heinrich.kuhn@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com>
Hans de Goede [Thu, 25 Mar 2021 22:15:47 +0000 (23:15 +0100)]
rtl_bt: Add rtl8723bs_config-OBDA0623.bin symlink
Some x86/ACPI devices such as the Acer Aspire Switch 10E (SW3-016),
use an alternative ACPI hardware-id (HID) for the BT part of the
RTL8723BS chip.
Instead of using the standard OBDA8723 HID this device uses a HID
of OBDA0623. Despite using a different HID it does work fine with
the default config settings from the rtl8723bs_config-OBDA8723.bin
file. Add a symlink to that file, to fix BT not working on this
device due to a missing config file.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Hans de Goede [Thu, 25 Mar 2021 22:15:46 +0000 (23:15 +0100)]
brcm: Add nvram for the Chuwi Hi8 (CWI509) tablet
Add a NVRAM file for the brcmfmac43430a0 wifi/bit chip found on the
Chuw Hi8 (CWI509) tablet. This is based on copy of the existing
brcm/brcmfmac43430a0-sdio.jumper-ezpad-mini3.txt NVRAM file with some
the calibration values adjusted for the Chuwi Hi8 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Hans de Goede [Thu, 25 Mar 2021 22:15:45 +0000 (23:15 +0100)]
brcm: Add nvram for the Predia Basic tablet
Add a NVRAM file for the brcmfmac43340 wifi/bit chip found on the
predia-basic tablet. This is based on copy of the existing
brcm/brcmfmac43340-sdio.meegopad-t08.txt NVRAM file with some the
calibration values adjusted for the Predia Basic tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Petr Machata [Wed, 24 Feb 2021 15:39:07 +0000 (16:39 +0100)]
Mellanox: Add new mlxsw_spectrum firmware xx.2008.2406
Add latest verified version of Mellanox Spectrum-family switch firmware,
for Spectrum (13.2008.2406), Spectrum-2 (29.2008.2406) and Spectrum-3
(30.2008.2406).
This release contains the following fixes and improvements:
- MIRROR_SAMPLER_ACTION.mirror_probability_rate inverted.
- When adjacency is replaced-if-inactive (RATR.opcode=3), bad parameter was
reported when replacing an active entry.
- TC pool occupancy watermark not cleared after port splits.
- Per-TC counter of ECN-marked packets supported.
- When duplicating VXLAN packets for head-end replication, number of
lookups was limited to 254, while Spectrum>=2 support 4K.
- Deadlock on port activation when 3 1x ports are active in a single port
cluster on Spectrum-3.
- A storm of congestion threshold events generated on stably-congested
traffic when a 200 Gbps port is flapped on Spectrum-3.
- Incorrect early scheduling parameters for 50G 2-way split on Spectrum-2.
- Timeouts when accessing certain CRspace addresses.
- Enable sampling trapped packets.
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Jérôme Pouiller [Mon, 8 Feb 2021 12:53:48 +0000 (13:53 +0100)]
silabs: add new firmware for WF200
Add version 3.12.1 (released the 2021-02-18) of firmware for Silabs
WF200. This firmware is necessary for the wfx driver currently hosted in
the staging/ directory of the Linux kernel.
Here the last modifications (only modifications tagged [LMAC] have an
impact on Linux):
New Features/Improvements:
[1725] - [UMAC] Wi-Fi power mode API with 'listen_interval = 0' is
taken into account
Bug fixes:
[1710] - [UMAC] Increase WPA3 connection authentication timeout
[1712] - [LMAC] Avoid beacon collision in concurrent mode
[1726] - [LMAC] Fix 'incoherent status and result_flags' warning
[1730] - [UMAC] Fix incorrect packet abort leading to assert
Petr Machata [Wed, 27 Jan 2021 14:41:24 +0000 (15:41 +0100)]
Mellanox: Add new mlxsw_spectrum firmware xx.2008.2304
Add latest verified version of Mellanox Spectrum-family switch firmware,
for Spectrum (13.2008.2304), Spectrum-2 (29.2008.2304) and Spectrum-3
(30.2008.2304).
This release fixes the following issues (among others):
- Rx pause packet reaction latency on Spectrum-3
- Certain high-numbered flow counters would not work on Spectrum-2.
- FW freeze on Spectrum-1 when under heavy PTP traffic load.
- Mirroring traffic to the CPU on Spectrum-2.
- Shared headroom would not be exhausted before drops started occurring.
- Per-priority Rx discard counters were not always cleared.
- 400-Gbps ports with PFC enabled kept sending pause frames without buffer
pressure.
- Several issues in flow control and traffic admittance, and FW freeze
after an on-the-fly shared buffer reconfiguration.
- A number of issues in forwarding line speed traffic to partially split
8x ports on Spectrum-3.
- A number of issues related to in-service FW upgrade (ISSU / ISFU).
- Port shaper influenced ingress rate when PFC was enabled.
- FW freeze after a port was set admin down when unrelated ports were
congested.
And includes the following new feature:
- Improvements to counter read performance
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Jeremy Linton [Mon, 11 Jan 2021 23:18:50 +0000 (17:18 -0600)]
brcm: Link RPi4's WiFi firmware with DMI machine name.
The kernel when booted in ACPI mode with SMBIOS/DMI
data uses that data to set the machine manufacture/model.
The RPi's WiFi driver uses the machine string to
select the correct firmware image. Because of
this, an additional link to select the correct
firmware is needed.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Peter Robinson [Fri, 8 Jan 2021 10:00:29 +0000 (10:00 +0000)]
brcm: Update Raspberry Pi 3B+/4B NVRAM for downstream changes
The Raspberry Pi Foundation NVRAM files have been updated for a new
BT/WiFi coexistence parameter for firmwares newer than 177, now
we have new firmwares (7.45.221) from Cypress for the BCM43455
update the NVRAM for these parameters.
Update the RPi4B NVRAM boardflags3 parameter to match too, which
also happens to be what we already have for the RPi3B+.
Jeremy Linton [Fri, 8 Jan 2021 20:44:20 +0000 (14:44 -0600)]
cypress: Fix link direction
It appears the link direction was incorrect resulting
in dangling symlinks. This also causes the brcm devices
to be unable to find their firmware
Fixes: 060ad8b3d505e ("cypress: Link the new cypress firmware to the old brcm files") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Josh Boyer <jwboyer@kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Peter Robinson [Tue, 5 Jan 2021 16:04:42 +0000 (16:04 +0000)]
cypress: Link the new cypress firmware to the old brcm files
By linking the new firmware to the old file it allows exisiting
kernels to make use of the new firmware and make use of the
newer firmware with all the associated fixes.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Remove these old ones as they're likely vulnerable to at least the
KrØØk vulnerability (CVE-2019-15126).
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Stefan Seyfried [Wed, 16 Dec 2020 13:24:40 +0000 (14:24 +0100)]
make AP6212 in bananpi m2 plus/zero work
BananaPi M2 zero and M2 plus boards contain an AP6212 module which
works well with the default AP6212 config. Create symlinks so that
they work out of the box.
Signed-off-by: Stefan Seyfried <seife+dev@b1-systems.com> Signed-off-by: Josh Boyer <jwboyer@kernel.org>
projects / linux-firmware / log