Pete Cooper [Thu, 28 May 2015 19:43:06 +0000 (19:43 +0000)]
Add BranchProbabilityInfo::releaseMemory to clear the Weights field.
BranchProbabilityInfo was leaking 3MB of memory when running 'opt -O2 verify-uselistorder.lto.bc'. This was due to the Weights member not being cleared once the pass is no longer needed.
This adds the releaseMemory override to clear that field. The other fields are cleared at the end of runOnFunction so can stay there.
Alexey Samsonov [Thu, 28 May 2015 18:35:18 +0000 (18:35 +0000)]
Add llvm-dwarfdump-fuzzer that uses LibFuzzer to fuzz llvm-dwarfdump tool.
The fuzzer is very simple, but not quite useful at the moment: it's unable
to discover "interesting" examples, as LLVMObject library is terrible at
error recovery, calling "report_fatal_error()" far too often.
AsmPrinter: Suppress warnings on GCC from r238362, NFC
GCC seems to have some overzealous warnings about strict aliasing.
Rafael reports that this patch suppresses them on GCC 4.9, and I'm
hoping this will work for GCC 4.7 as well. I'll watch [1] and iterate
if necessary.
Owen Anderson [Thu, 28 May 2015 18:03:07 +0000 (18:03 +0000)]
Expand the Flags field of MCInstrDesc to 64 bits, while simultaneously
shrinking the Size and NumDefs fields to offset the size growth, and
reordering the fields to preserve a good packing.
This is necessary in the short term for adding a convergent flag, and
simultaneously future-proofs us against more flags being added in the
future.
Ed Maste [Thu, 28 May 2015 15:38:17 +0000 (15:38 +0000)]
DebugInfo: .debug_line DWARF64 support
This adds support for the 64-bit DWARF format, but is still limited to
less than 4GB of debug data by the DataExtractor class. Some versions
of the GNU MIPS toolchain generate 64-Bit DWARF even though it isn't
actually necessary.
Rafael Espindola [Thu, 28 May 2015 15:20:00 +0000 (15:20 +0000)]
Don't create an unused _GLOBAL_OFFSET_TABLE_.
This was a bug for bug compatibility with gas that is completely unnecessary.
If a _GLOBAL_OFFSET_TABLE_ symbol is used, it will already be created by
the time we get to the ELF writer.
Daniel Sanders [Thu, 28 May 2015 14:52:15 +0000 (14:52 +0000)]
[mips] Make TTypeEncoding indirect to allow .eh_frame to be read-only.
Summary:
Following on from r209907 which made personality encodings indirect, do the
same for TType encodings. This fixes the case where a try/catch block needs
to generate references to, for example, std::exception in the
.gcc_except_table.
Benjamin Kramer [Thu, 28 May 2015 12:55:43 +0000 (12:55 +0000)]
[AsmPrinter] Destroy allocated DIEAbbrevs on teardown.
DIEAbbrev contains a SmallVector that can leak for overly large abbrevs. They
used to be owned by the DIE, but after the recent refactoring DWARFFile
allocates its own abbrevs.
Canonicalizing 'x [+-] (-Constant * y)' is not a win if we don't *know*
we will open up CSE opportunities.
If the multiply was 'nsw', then negating 'y' requires us to clear the
'nsw' flag. If this is actually worth pursuing, it is probably more
appropriate to do so in GVN or EarlyCSE.
Chandler Carruth [Thu, 28 May 2015 02:40:15 +0000 (02:40 +0000)]
[x86] Refactor the tests for popcnt.
Extracted from the D6531 patch by Bruno Cardoso Lopes, and re-generated
to reflect the current state of the world. This should let Bruno's D6531
actually show the delta between the approaches by running the x86 test
case update script after re-building.
Change `DIE::addChild()` to return a reference to the just-added node,
and update consumers to use it directly. An upcoming commit will
abstract away (and eventually change) the underlying storage of
`DIE::Children`.
AsmPrinter: Store abbreviation data directly in DIE and DIEValue
Stop storing a `DIEAbbrev` in `DIE`, since the data fits neatly inside
the `DIEValue` list. Besides being a cleaner data structure (avoiding
the parallel arrays), this gives us more freedom to rearrange the
`DIEValue` list.
This fixes the temporary memory regression from 845 MB up to 879 MB, and
drops it further to 829 MB for a net memory decrease of around 1.9%
(incremental decrease around 5.7%).
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
Reapply "AsmPrinter: Change DIEValue to be stored by value"
This reverts commit r238350, effectively reapplying r238349 after fixing
(all?) the problems, all somehow related to how I was using
`AlignedArrayCharUnion<>` inside `DIEValue`:
- MSVC can only handle `sizeof()` on types, not values. Change the
assert.
- GCC doesn't know the `is_trivially_copyable` type trait. Instead of
asserting it, add destructors.
- Call placement new even when constructing POD (i.e., the pointers).
- Instead of copying the char buffer, copy the casted classes.
I've left in a couple of `static_assert`s that I think both MSVC and GCC
know how to handle. If the bots disagree with me, I'll remove them.
- Check that the constructed type is either standard layout or a
pointer. This protects against a programming error: we really want
the "small" `DIEValue`s to be small and simple, so don't
accidentally change them not to be.
- Similarly, check that the size of the buffer is no bigger than a
`uint64_t` or a pointer. (I thought checking against
`sizeof(uint64_t)` would be good enough, but Chandler suggested that
pointers might sometimes be bigger than that in the context of
sanitizers.)
I've also committed r238359 in the meantime, which introduces a
DIEValue.def to simplify dispatching between the various types (thanks
to a review comment by David Blaikie). Without that, this commit would
be almost unintelligible.
Here's the original commit message:
--
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
--
Rafael Espindola [Wed, 27 May 2015 20:52:32 +0000 (20:52 +0000)]
There is only one current section.
Both MCStreamer and MCObjectStreamer were maintaining a current section
variable and they were slightly out of sync. I don't think this was observable,
but was inefficient and error prone.
Changing this requires a few cascading changes:
* SwitchSection has to call ChangeSection earlier for ChangeSection to see
the old section.
* With that change, ChangeSection cannot call EmitLabel, since during
ChangeSection we are still in the old section.
* When the object streamer requires a begin label, just reused the existing
generic support for begin labels instead of calling EmitLabel directly.
Alex Lorenz [Wed, 27 May 2015 19:39:44 +0000 (19:39 +0000)]
MIR: Remove 2 empty non-reverted directories form SVN.
The revert commit r238007 didn't delete the old 'MIR' directories
in 'include/llvm/CodeGen' and 'lib/CodeGen'. Since the resubmitted
commit r238341 uses the 'MIRParser' directories instead of 'MIR'
this commit deletes the unused directories.
Diego Novillo [Wed, 27 May 2015 19:34:01 +0000 (19:34 +0000)]
Final fix for PR 23499 and IR test case.
This fixes a bit I forgot in r238335. In addition to the data record and
the counter, we can also move the name of the counter to the comdat for
the associated function.
I'm also adding an IR test case to check that these three elements are
placed in the proper comdat.
Revert "AsmPrinter: Change DIEValue to be stored by value"
This reverts commit r238349, since it caused some errors on bots:
- std::is_trivially_copyable isn't available until GCC 5.0.
- It was complaining about strict aliasing with my use of
ArrayCharUnion.
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
An upcoming commit will switch to storing `DIEValue`s by value in a
`DIE`, so move the `DIE` down below all the subclasses it can. Two
subclasses inherit from `DIE`, so drop those down below `DIE`.
`DIEValue` will become a discriminated union, which contains an instance
of one of the classes that are currently subclasses. "Big" ones, such
as those that inherit from `DIE`, will continue to be stored by pointer.
This commit does as much of the code motion ahead of time as possible.
Renato Golin [Wed, 27 May 2015 18:15:37 +0000 (18:15 +0000)]
ARMTargetParser: Normalising build attributes
Now that most of the methods in Clang and LLVM that were parsing arch/cpu/fpu
strings are using ARMTargetParser, it's time to make it a bit more conforming
with what the ABI says.
This commit adds some clarification on what build attributes are accepted and
which are "non-standard". It also makes clear that the "defaultCPU" and
"defaultArch" methods were really just build attribute getters.
It also diverges from GCC's behaviour to say that armv2/armv3 are really an
ARMv4 in the build attributes, when the ABI has a clear state for that: Pre-v4.
Alex Lorenz [Wed, 27 May 2015 18:02:19 +0000 (18:02 +0000)]
Resubmit r237954 (MIR Serialization: print and parse LLVM IR using MIR format).
This commit a 3rd attempt at comitting the initial MIR serialization patch.
The first commit (r237708) was reverted in 237730. Then the second commit
(r237954) was reverted in r238007, as the MIR library under CodeGen caused
a circular dependency where the CodeGen library depended on MIR and MIR
library depended on CodeGen.
This commit has fixed the dependencies between CodeGen and MIR by
reorganizing the MIR serialization code - the code that prints out
MIR has been moved to CodeGen, and the MIR library has been renamed
to MIRParser. Now the CodeGen library doesn't depend on the
MIRParser library, thus the circular dependency no longer exists.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Diego Novillo [Wed, 27 May 2015 16:44:47 +0000 (16:44 +0000)]
Fix PR 23499 - Avoid multiple profile counters for functions in comdat sections.
Counter symbols created for linkonce functions are not discarded by ELF
linkers unless the symbols are placed in the same comdat section as its
associated function.
Chandler Carruth [Wed, 27 May 2015 09:02:51 +0000 (09:02 +0000)]
[PM] Use a simpler technique to drop optional analysis manager arguments
when invoking run methods.
This technique was suggested by Dinesh Dwivedi who also wrote the
original patch. During the code review, they explained to me that this
isn't a fully general technique as we need to know the signatures of the
method candidates. Since this is really a narrower utility, I switched
the names and structure to be more clearly a specialized run method
invoke helper and commented it accordingly. I still think this is
a pretty big win.
Very sorry to Dinesh for the extreme delay in landing this patch. I've
been far to busy poking at other things.
Daniel Sanders [Wed, 27 May 2015 08:44:01 +0000 (08:44 +0000)]
Revert r238190 and r238197: [mips] Make TTypeEncoding indirect to allow .eh_frame to be read-only.
This broke the llvm-mips-linux builder and several of our out-of-tree builders.
Initial investigations show that the commit probably isn't the problem but
reverting anyway while I investigate.
AVX-512: Implemented all forms of sign-extend and zero-extend instructions for KNL and SKX
Implemented DAG lowering for all these forms.
Added tests for DAG lowering and encoding.
Quentin Colombet [Wed, 27 May 2015 06:28:41 +0000 (06:28 +0000)]
[X86] Implement the support for shrink-wrapping.
With this patch the x86 backend is now shrink-wrapping capable
and this functionality can be tested by using the
-enable-shrink-wrap switch.
The next step is to make more test and enable shrink-wrapping by
default for x86.
Chandler Carruth [Wed, 27 May 2015 02:49:05 +0000 (02:49 +0000)]
[inliner] Fix the early-exit of the inline cost analysis to correctly
model the dense vector instruction bonuses.
Previously, this code really didn't effectively compute the density of
inlined vector instructions and apply the intended inliner bonus. It
would try to compute it repeatedly while analyzing the function and
didn't handle the case where future vector instructions would tip the
scales back towards the bonus.
Instead, speculatively apply all possible bonuses to the threshold
initially. Once we *know* that a certain bonus can not be applied,
subtract it. This should delay early bailout enough to get much more
consistent results without actually causing us to analyze huge swaths of
code. I expect some (hopefully mild) compile time hit here, and some
swings in performance, but this was definitely the intended behavior of
these bonuses.
This also dramatically simplifies the computation of the bonuses to not
interact with each other in confusing ways. The previous code didn't do
a good job of this and the values for bonuses may be surprising but are
at least now clearly written in the code.
Finally, fix code to be in line with comments and use zero as the
bailout condition.
Patch by Easwaran Raman, with some comment tweaks by me to try and
further clarify what is going on with this code.
Philip Reames [Tue, 26 May 2015 21:16:42 +0000 (21:16 +0000)]
[PlaceSafepoints] Entry safepoint location doesn't need to be a terminator
Long ago, the poll insertion code assumed that the insertion site was a terminator. As a result, the entry selection code would split a basic block to ensure it could pass a terminator. The insertion code was updated quite a while ago - possibly before it ever landed upstream - but the now redundant work was never removed.
While I'm at it, remove a comment which doesn't apply to the upstreamed code.
Philip Reames [Tue, 26 May 2015 21:03:23 +0000 (21:03 +0000)]
[PlaceSafepoints] Cleanup InsertSafepointPoll function
While working on another change, I noticed that the naming in this function was mildly deceptive. While fixing that, I took the oppurtunity to modernize some of the code. NFC intended.
projects / llvm / log