Alvaro Herrera [Thu, 4 Oct 2018 14:37:20 +0000 (11:37 -0300)]
Fix duplicate primary keys in partitions
When using the CREATE TABLE .. PARTITION OF syntax, it's possible to
cause a partition to get two primary keys if the parent already has one.
Tighten the check to disallow that.
Reported-by: Rajkumar Raghuwanshi
Author: Amul Sul
Discussion: https://postgr.es/m/CAKcux6=OnSV3-qd8Gb6W=KPPwcCz6Fe_O_MQYjTa24__Xn8XxA@mail.gmail.com
Andres Freund [Wed, 3 Oct 2018 19:48:37 +0000 (12:48 -0700)]
Fix issues around EXPLAIN with JIT.
I (Andres) was more than a bit hasty in committing 33001fd7a7072d48327
after last minute changes, leading to a number of problems (jit output
was only shown for JIT in parallel workers, and just EXPLAIN without
ANALYZE didn't work). Lukas luckily found these issues quickly.
Instead of combining instrumentation in in standard_ExecutorEnd(), do
so on demand in the new ExplainPrintJITSummary().
Also update a documentation example of the JIT output, changed in 52050ad8ebec8d831.
Author: Lukas Fittl, with minor changes by me
Discussion: https://postgr.es/m/CAP53PkxmgJht69pabxBXJBM+0oc6kf3KHMborLP7H2ouJ0CCtQ@mail.gmail.com
Backpatch: 11, where JIT compilation was introduced
Amit Kapila [Wed, 3 Oct 2018 03:44:09 +0000 (09:14 +0530)]
MAXALIGN the target address where we store flattened value.
The API (EOH_flatten_into) that flattens the expanded value representation
expects the target address to be maxaligned. All it's usage adhere to that
principle except when serializing datums for parallel query. Fix that
usage.
Diagnosed-by: Tom Lane
Author: Tom Lane and Amit Kapila
Backpatch-through: 9.6
Discussion: https://postgr.es/m/11629.1536550032@sss.pgh.pa.us
Tom Lane [Tue, 2 Oct 2018 16:41:28 +0000 (12:41 -0400)]
Set snprintf.c's maximum number of NL arguments to be 31.
Previously, we used the platform's NL_ARGMAX if any, otherwise 16.
The trouble with this is that the platform value is hugely variable,
ranging from the POSIX-minimum 9 to as much as 64K on recent FreeBSD.
Values of more than a dozen or two have no practical use and slow down
the initialization of the argtypes array. Worse, they cause snprintf.c
to consume far more stack space than was the design intention, possibly
resulting in stack-overflow crashes.
Standardize on 31, which is comfortably more than we need (it looks like
no existing translatable message has more than about 10 parameters).
I chose that, not 32, to make the array sizes powers of 2, for some
possible small gain in speed of the memset.
The lack of reported crashes suggests that the set of platforms we
use snprintf.c on (in released branches) may have no overlap with
the set where NL_ARGMAX has unreasonably large values. But that's
not entirely clear, so back-patch to all supported branches.
Tom Lane [Tue, 2 Oct 2018 15:54:12 +0000 (11:54 -0400)]
Fix corner-case failures in has_foo_privilege() family of functions.
The variants of these functions that take numeric inputs (OIDs or
column numbers) are supposed to return NULL rather than failing
on bad input; this rule reduces problems with snapshot skew when
queries apply the functions to all rows of a catalog.
has_column_privilege() had careless handling of the case where the
table OID didn't exist. You might get something like this:
select has_column_privilege(9999,'nosuchcol','select');
ERROR: column "nosuchcol" of relation "(null)" does not exist
or you might get a crash, depending on the platform's printf's response
to a null string pointer.
In addition, while applying the column-number variant to a dropped
column returned NULL as desired, applying the column-name variant
did not:
select has_column_privilege('mytable','........pg.dropped.2........','select');
ERROR: column "........pg.dropped.2........" of relation "mytable" does not exist
It seems better to make this case return NULL as well.
Also, the OID-accepting variants of has_foreign_data_wrapper_privilege,
has_server_privilege, and has_tablespace_privilege didn't follow the
principle of returning NULL for nonexistent OIDs. Superusers got TRUE,
everybody else got an error.
Per investigation of Jaime Casanova's report of a new crash in HEAD.
These behaviors have been like this for a long time, so back-patch to
all supported branches.
Patch by me; thanks to Stephen Frost for discussion and review
Michael Paquier [Tue, 2 Oct 2018 07:34:59 +0000 (16:34 +0900)]
Fix documentation of pgrowlocks using "lock_type" instead of "modes"
The example used in the documentation is outdated as well. This is an
oversight from 0ac5ad5, which bumped up pgrowlocks but forgot some bits
of the documentation.
Reported-by: Chris Wilson
Discussion: https://postgr.es/m/153838692816.2950.12001142346234155699@wrigleys.postgresql.org
Backpatch-through: 9.3
Change PROCEDURE to FUNCTION in CREATE EVENT TRIGGER syntax
This was claimed to have been done in 0a63f996e018ac508c858e87fa39cc254a5db49f, but that actually only
changed the documentation and not the grammar. (That commit did fully
change it for CREATE TRIGGER.)
Tom Lane [Mon, 1 Oct 2018 15:51:07 +0000 (11:51 -0400)]
Fix tuple_data_split() to not open a relation without any lock.
contrib/pageinspect's tuple_data_split() function thought it could get
away with opening the referenced relation with NoLock. In practice
there's no guarantee that the current session holds any lock on that
rel (even if we just read a page from it), so that this is unsafe.
Switch to using AccessShareLock. Also, postpone closing the relation,
so that we needn't copy its tupdesc. Also, fix unsafe use of
att_isnull() for attributes past the end of the tuple.
Per testing with a patch that complains if we open a relation without
holding any lock on it. I don't plan to back-patch that patch, but we
should close the holes it identifies in all supported branches.
Tom Lane [Mon, 1 Oct 2018 15:39:13 +0000 (11:39 -0400)]
Fix ALTER COLUMN TYPE to not open a relation without any lock.
If the column being modified is referenced by a foreign key constraint
of another table, ALTER TABLE would open the other table (to re-parse
the constraint's definition) without having first obtained a lock on it.
This was evidently intentional, but that doesn't mean it's really safe.
It's especially not safe in 9.3, which pre-dates use of MVCC scans for
catalog reads, but even in current releases it doesn't seem like a good
idea.
We know we'll need AccessExclusiveLock shortly to drop the obsoleted
constraint, so just get that a little sooner to close the hole.
Per testing with a patch that complains if we open a relation without
holding any lock on it. I don't plan to back-patch that patch, but we
should close the holes it identifies in all supported branches.
Tom Lane [Sun, 30 Sep 2018 20:24:56 +0000 (16:24 -0400)]
Fix detection of the result type of strerror_r().
The method we've traditionally used, of redeclaring strerror_r() to
see if the compiler complains of inconsistent declarations, turns out
not to work reliably because some compilers only report a warning,
not an error. Amazingly, this has gone undetected for years, even
though it certainly breaks our detection of whether strerror_r
succeeded.
Let's instead test whether the compiler will take the result of
strerror_r() as a switch() argument. It's possible this won't
work universally either, but it's the best idea I could come up with
on the spur of the moment.
Back-patch of commit 751f532b9. Buildfarm results indicate that only
icc-on-Linux actually has an issue here; perhaps the lack of field
reports indicates that people don't build PG for production that way.
Amit Kapila [Fri, 28 Sep 2018 06:54:09 +0000 (12:24 +0530)]
Fix assertion failure when updating full_page_writes for checkpointer.
When the checkpointer receives a SIGHUP signal to update its configuration,
it may need to update the shared memory for full_page_writes and need to
write a WAL record for it. Now, it is quite possible that the XLOG
machinery has not been initialized by that time and it will lead to
assertion failure while doing that. Fix is to allow the initialization of
the XLOG machinery outside critical section.
This bug has been introduced by the commit 2c03216d83 which added the XLOG
machinery initialization in RecoveryInProgress code path.
Reported-by: Dilip Kumar
Author: Dilip Kumar Reviewed-by: Michael Paquier and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAFiTN-u4BA8KXcQUWDPNgaKAjDXC=C2whnzBM8TAcv=stckYUw@mail.gmail.com
Michael Paquier [Fri, 28 Sep 2018 02:55:43 +0000 (11:55 +0900)]
Fix WAL recycling on standbys depending on archive_mode
A restart point or a checkpoint recycling WAL segments treats segments
marked with neither ".done" (archiving is done) or ".ready" (segment is
ready to be archived) in archive_status the same way for archive_mode
being "on" or "always". While for a primary this is fine, a standby
running a restart point with archive_mode = on would try to mark such a
segment as ready for archiving, which is something that will never
happen except after the standby is promoted.
Note that this problem applies only to WAL segments coming from the
local pg_wal the first time archive recovery is run. Segments part of a
self-contained base backup are the most common case where this could
happen, however even in this case normally the .done markers would be
most likely part of the backup. Segments recovered from an archive are
marked as .ready or .done by the startup process, and segments finished
streaming are marked as such by the WAL receiver, so they are handled
already.
Reported-by: Haruka Takatsuka
Author: Michael Paquier
Discussion: https://postgr.es/m/15402-a453c90ed4cf88b2@postgresql.org
Backpatch-through: 9.5, where archive_mode = always has been added.
Tom Lane [Thu, 27 Sep 2018 22:15:06 +0000 (18:15 -0400)]
Fix assorted bugs in pg_get_partition_constraintdef().
It failed if passed a nonexistent relation OID, or one that was a non-heap
relation, because of blindly applying heap_open to a user-supplied OID.
This is not OK behavior for a SQL-exposed function; we have a project
policy that we should return NULL in such cases. Moreover, since
pg_get_partition_constraintdef ought now to work on indexes, restricting
it to heaps is flat wrong anyway.
The underlying function generate_partition_qual() wasn't on board with
indexes having partition quals either, nor for that matter with rels
having relispartition set but yet null relpartbound. (One wonders
whether the person who wrote the function comment blocks claiming that
these functions allow a missing relpartbound had ever tested it.)
Fix by testing relispartition before opening the rel, and by using
relation_open not heap_open. (If any other relkinds ever grow the
ability to have relispartition set, the code will work with them
automatically.) Also, don't reject null relpartbound in
generate_partition_qual.
Back-patch to v11, and all but the null-relpartbound change to v10.
(It's not really necessary to change generate_partition_qual at all
in v10, but I thought s/heap_open/relation_open/ would be a good
idea anyway just to keep the code in sync with later branches.)
Peter Eisentraut [Fri, 15 Jun 2018 03:22:14 +0000 (23:22 -0400)]
Recurse to sequences on ownership change for all relkinds
When a table ownership is changed, we must apply that also to any owned
sequences. (Otherwise, it would result in a situation that cannot be
restored, because linked sequences must have the same owner as the
table.) But this was previously only applied to regular tables and
materialized views. But it should also apply to at least foreign
tables. This patch removes the relkind check altogether, because it
doesn't save very much and just introduces the possibility of similar
omissions.
Bug: #15238 Reported-by: Christoph Berg <christoph.berg@credativ.de>
Michael Paquier [Wed, 26 Sep 2018 01:29:20 +0000 (10:29 +0900)]
Rework activation of commit timestamps during recovery
The activation and deactivation of commit timestamp tracking has not
been handled consistently for a primary or standbys at recovery. The
facility can be activated at three different moments of recovery:
- The beginning, where a primary would use the GUC value for the
decision-making, and where a standby relies on the contents of the
control file.
- When replaying a XLOG_PARAMETER_CHANGE record at redo.
- The end, where both primary and standby rely on the GUC value.
Using the GUC value for a primary at the beginning of recovery causes
problems with commit timestamp access when doing crash recovery.
Particularly, when replaying transaction commits, it could be possible
that an attempt to read commit timestamps is done for a transaction
which committed at a moment when track_commit_timestamp was disabled.
A test case is added to reproduce the failure. The test works down to
v11 as it takes advantage of transaction commits within procedures.
Reported-by: Hailong Li
Author: Masahiko Sawasa, Michael Paquier Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/11224478-a782-203b-1f17-e4797b39bdf0@qunar.com
Backpatch-through: 9.5, where commit timestamps have been introduced.
Andres Freund [Tue, 25 Sep 2018 19:54:29 +0000 (12:54 -0700)]
Collect JIT instrumentation from workers.
Previously, when using parallel query, EXPLAIN (ANALYZE)'s JIT
compilation timings did not include the overhead from doing so on the
workers. Fix that.
We do so by simply aggregating the cost of doing JIT compilation on
workers and the leader together. Arguably that's not quite accurate,
because the total time spend doing so is spent in parallel - but it's
hard to do much better. For additional detail, when VERBOSE is
specified, the stats for workers are displayed separately.
Author: Amit Khandekar and Andres Freund
Discussion: https://postgr.es/m/CAJ3gD9eLrz51RK_gTkod+71iDcjpB_N8eC6vU2AW-VicsAERpQ@mail.gmail.com
Backpatch: 11-
Tom Lane [Tue, 25 Sep 2018 17:23:29 +0000 (13:23 -0400)]
Make some fixes to allow building Postgres on macOS 10.14 ("Mojave").
Apple's latest rearrangements of the system-supplied headers have broken
building of PL/Perl and PL/Tcl. The only practical way to fix PL/Tcl is to
start using the "-isysroot" compiler flag to point to SDK-supplied headers,
as Apple expects. We must also start distinguishing where to find Perl's
headers from where to find its shared library; but that seems like good
cleanup anyway.
Extensions that formerly did something like -I$(perl_archlibexp)/CORE
should now do -I$(perl_includedir)/CORE instead. perl_archlibexp
is still the place to look for libperl.so, though.
If for some reason you don't like the default -isysroot setting, you can
override that by setting PG_SYSROOT in configure's arguments. I don't
currently think people would need to do so, unless maybe for cross-version
build purposes.
In addition, teach configure where to find tclConfig.sh. Our traditional
method of searching $auto_path hasn't worked for the last couple of macOS
releases, and it now seems clear that Apple's not going to change that.
The workaround of manually specifying --with-tclconfig was annoying
already, but Mojave's made it a lot more so because the sysroot path now
has to be included as well. Let's just wire the knowledge into configure
instead. To avoid breaking builds against non-default Tcl installations
(e.g. MacPorts) wherein the $auto_path method probably still works,
arrange to try the additional case only after all else has failed.
Back-patch to all supported versions, since at least the buildfarm
cares about that. The changes are set up to not do anything on macOS
releases that are old enough to not have functional sysroot trees.
Michael Paquier [Tue, 25 Sep 2018 02:05:13 +0000 (11:05 +0900)]
Ignore publication tables when --no-publications is used
96e1cb4 has added support for --no-publications in pg_dump, pg_dumpall
and pg_restore, but forgot the fact that publication tables also need to
be ignored when this option is used.
Author: Gilles Darold Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/3f48e812-b0fa-388e-2043-9a176bdee27e@dalibo.com
Backpatch-through: 10, where publications have been added.
Michael Paquier [Tue, 25 Sep 2018 00:56:41 +0000 (09:56 +0900)]
Revoke pg_stat_statements_reset() permissions
Commit 25fff40 has granted execute permission of the function
pg_stat_statements_reset() to default role "pg_read_all_stats", but this
role is meant to read statistics, and not to reset them. The
permissions on this function are revoked from "pg_read_all_stats". The
version of pg_stat_statements is bumped up in consequence.
Author: Haribabu Kommi Reviewed-by: Michael Paquier, Amit Kapila
Discussion: https://postgr.es/m/CAJrrPGf5fCnKqXObpwGN9nMyD--tzOf-7LFCJiz59Z1wJ5qj9A@mail.gmail.com
Andres Freund [Mon, 24 Sep 2018 20:27:08 +0000 (13:27 -0700)]
Make EXPLAIN output for JIT compilation more dense.
A discussion about also reporting JIT compilation overhead on workers
brought unhappiness with the verbosity of the current explain format
to light. Make the text format more dense, and restructure the
structured output to mirror that more closely.
As we're re-jiggering the output format anyway: The denser format
allows us to report all flags for JIT compilation (now also reporting
PGJIT_EXPR and PGJIT_DEFORM), and report the total time in addition to
the individual times.
Per complaint from Tom Lane.
Author: Andres Freund
Discussion: https://postgr.es/m/27812.1537221015@sss.pgh.pa.us
Backpatch: 11-, where JIT compilation was introduced
Andrew Dunstan [Mon, 24 Sep 2018 20:11:24 +0000 (16:11 -0400)]
Fast default trigger and expand_tuple fixes
Ensure that triggers get properly filled in tuples for the OLD value.
Also fix the logic of detecting missing null values. The previous logic
failed to detect a missing null column before the first missing column
with a default. Fixing this has simplified the logic a bit.
Regression tests are added to test changes. This should ensure better
coverage of expand_tuple().
Original bug reports, and some code and test scripts from Tomas Vondra
Tom Lane [Mon, 24 Sep 2018 15:30:51 +0000 (11:30 -0400)]
Fix over-allocation of space for array_out()'s result string.
array_out overestimated the space needed for its output, possibly by
a very substantial amount if the array is multi-dimensional, because
of wrong order of operations in the loop that counts the number of
curly-brace pairs needed. While the output string is normally
short-lived, this could still cause problems in extreme cases.
An additional minor error was that it counted one more delimiter than
is actually needed.
Repair those errors, add an Assert that the space is now correctly
calculated, and make some minor improvements in the comments.
I also failed to resist the temptation to get rid of an integer
modulus operation per array element; a simple comparison is sufficient.
This bug dates clear back to Berkeley days, so back-patch to all
supported versions.
Initialize random() in bootstrap/stand-alone postgres and in initdb.
This removes a difference between the standard IsUnderPostmaster
execution environment and that of --boot and --single. In a stand-alone
backend, "SELECT random()" always started at the same seed.
On a system capable of using posix shared memory, initdb could still
conclude "selecting dynamic shared memory implementation ... sysv".
Crashed --boot or --single postgres processes orphaned shared memory
objects having names that collided with the not-actually-random names
that initdb probed. The sysv fallback appeared after ten crashes of
--boot or --single postgres. Since --boot and --single are rare in
production use, systems used for PostgreSQL development are the
principal candidate to notice this symptom.
Back-patch to 9.3 (all supported versions). PostgreSQL 9.4 introduced
dynamic shared memory, but 9.3 does share the "SELECT random()" problem.
Tom Lane [Sun, 23 Sep 2018 20:05:45 +0000 (16:05 -0400)]
Fix failure in WHERE CURRENT OF after rewinding the referenced cursor.
In a case where we have multiple relation-scan nodes in a cursor plan,
such as a scan of an inheritance tree, it's possible to fetch from a
given scan node, then rewind the cursor and fetch some row from an
earlier scan node. In such a case, execCurrent.c mistakenly thought
that the later scan node was still active, because ExecReScan hadn't
done anything to make it look not-active. We'd get some sort of
failure in the case of a SeqScan node, because the node's scan tuple
slot would be pointing at a HeapTuple whose t_self gets reset to
invalid by heapam.c. But it seems possible that for other relation
scan node types we'd actually return a valid tuple TID to the caller,
resulting in updating or deleting a tuple that shouldn't have been
considered current. To fix, forcibly clear the ScanTupleSlot in
ExecScanReScan.
Another issue here, which seems only latent at the moment but could
easily become a live bug in future, is that rewinding a cursor does
not necessarily lead to *immediately* applying ExecReScan to every
scan-level node in the plan tree. Upper-level nodes will think that
they can postpone that call if their child node is already marked
with chgParam flags. I don't see a way for that to happen today in
a plan tree that's simple enough for execCurrent.c's search_plan_tree
to understand, but that's one heck of a fragile assumption. So, add
some logic in search_plan_tree to detect chgParam flags being set on
nodes that it descended to/through, and assume that that means we
should consider lower scan nodes to be logically reset even if their
ReScan call hasn't actually happened yet.
Per bug #15395 from Matvey Arye. This has been broken for a long time,
so back-patch to all supported branches.
Tom Lane [Fri, 21 Sep 2018 19:58:37 +0000 (15:58 -0400)]
Fix bogus tab-completion rule for CREATE PUBLICATION.
You can't use "FOR TABLE" as a single Matches argument, because readline
will consider that input to be two words not one. It's necessary to make
the pattern contain two arguments.
The case accidentally worked anyway because the words_after_create
test fired ... but only for the first such table name.
Noted by Edmund Horner, though this isn't exactly his proposed fix.
Backpatch to v10 where the faulty code came in.
Thomas Munro [Fri, 21 Sep 2018 12:40:13 +0000 (00:40 +1200)]
Use size_t consistently in dsa.{ch}.
Takeshi Ideriha complained that there is a mixture of Size and size_t
in dsa.c and corresponding header. Let's use size_t. Back-patch to 10
where dsa.c landed, to make future back-patching easy.
Andres Freund [Thu, 13 Sep 2018 21:18:43 +0000 (14:18 -0700)]
Error out for clang on x86-32 without SSE2 support, no -fexcess-precision.
As clang currently doesn't support -fexcess-precision=standard,
compiling x86-32 code with SSE2 disabled, can lead to problems with
floating point overflow checks and the like.
This issue was noticed because clang, on at least some BSDs, defaults
to i386 compatibility, whereas it defaults to pentium4 on Linux. Our
forced usage of __builtin_isinf() lead to some overflow checks not
triggering when compiling for i386, e.g. when the result of the
calculation didn't overflow in 80bit registers, but did so in 64bit.
While we could just fall back to a non-builtin isinf, it seems likely
that the use of 80bit registers leads to other problems (which is why
we force the flag for GCC already). Therefore error out when
detecting clang in that situation.
Reported-By: Victor Wagner Analyzed-By: Andrew Gierth and Andres Freund
Author: Andres Freund
Discussion: https://postgr.es/m/20180905005130.ewk4xcs5dgyzcy45@alap3.anarazel.de
Backpatch: 9.3-, all supported versions are affected
Thomas Munro [Thu, 20 Sep 2018 03:52:39 +0000 (15:52 +1200)]
Fix segment_bins corruption in dsa.c.
If a segment has been freed by dsa.c because it is entirely empty, other
backends must make sure to unmap it before following links to new
segments that might happen to have the same index number, or they could
finish up looking at a defunct segment and then corrupt the segment_bins
lists. The correct protocol requires checking freed_segment_counter
after acquiring the area lock and before resolving any index number to a
segment. Add the missing checks and an assertion.
Back-patch to 10, where dsa.c first arrived.
Author: Thomas Munro Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/CAEepm%3D0thg%2Bja5zGVa7jBy-uqyHrTqTm8HGhEOtMmigGrAqTbw%40mail.gmail.com
Thomas Munro [Thu, 20 Sep 2018 02:02:56 +0000 (14:02 +1200)]
Defer restoration of libraries in parallel workers.
Several users of extensions complained of crashes in parallel workers
that turned out to be due to syscache access from their _PG_init()
functions. Reorder the initialization of parallel workers so that
libraries are restored after the caches are initialized, and inside a
transaction.
This was reported in bug #15350 and elsewhere. We don't consider it
to be a bug: extensions shouldn't do that, because then they can't be
used in shared_preload_libraries. However, it's a fairly obscure
hazard and these extensions worked in practice before parallel query
came along. So let's make it work. Later commits might add a warning
message and eventually an error.
Back-patch to 9.6, where parallel query landed.
Author: Thomas Munro Reviewed-by: Amit Kapila Reported-by: Kieran McCusker, Jimmy
Discussion: https://postgr.es/m/153512195228.1489.8545997741965926448%40wrigleys.postgresql.org
Tom Lane [Wed, 19 Sep 2018 16:43:51 +0000 (12:43 -0400)]
Don't ignore locktable-full failures in StandbyAcquireAccessExclusiveLock.
Commit 37c54863c removed the code in StandbyAcquireAccessExclusiveLock
that checked the return value of LockAcquireExtended. That created a
bug, because it's still passing reportMemoryError = false to
LockAcquireExtended, meaning that LOCKACQUIRE_NOT_AVAIL will be returned
if we're out of shared memory for the lock table.
In such a situation, the startup process would believe it had acquired an
exclusive lock even though it hadn't, with potentially dire consequences.
To fix, just drop the use of reportMemoryError = false, which allows us
to simplify the call into a plain LockAcquire(). It's unclear that the
locktable-full situation arises often enough that it's worth having a
better recovery method than crash-and-restart. (I strongly suspect that
the only reason the code path existed at all was that it was relatively
simple to do in the pre-37c54863c implementation. But now it's not.)
LockAcquireExtended's reportMemoryError parameter is now dead code and
could be removed. I refrained from doing so, however, because there
was some interest in resurrecting the behavior if we do get reports of
locktable-full failures in the field. Also, it seems unwise to remove
the parameter concurrently with shipping commit f868a8143, which added a
parameter; if there are any third-party callers of LockAcquireExtended,
we want them to get a wrong-number-of-parameters compile error rather
than a possibly-silent misinterpretation of its last parameter.
The hack this required in initdb.c should probably have clued us that it
wasn't really ready, but we didn't get the hint. Subsequent developments
have made clear that it affected text-vs-binary behavior in a lot of
places, and there's no reason to think that any of those behavioral changes
are desirable. There's no time to fix this before 11beta4, so just revert
for the moment. We can keep working on this in HEAD, and maybe reconsider
a back-patch once we're satisfied things are stable.
(I take the blame for this fiasco, having encouraged Michael to back-patch
a change at the last possible moment before beta wrap.)
Tom Lane [Tue, 18 Sep 2018 17:02:27 +0000 (13:02 -0400)]
Fix some probably-minor oversights in readfuncs.c.
The system expects TABLEFUNC RTEs to have coltypes, coltypmods, and
colcollations lists, but outfuncs doesn't dump them and readfuncs doesn't
restore them. This doesn't cause obvious failures, because the only things
that look at those fields are expandRTE() and get_rte_attribute_type(),
which are mostly used during parse analysis, before anything would've
passed the parsetree through outfuncs/readfuncs. But expandRTE() is used
in build_physical_tlist(), which means that that function will return a
wrong answer for a TABLEFUNC RTE that came from a view. Very accidentally,
this doesn't cause serious problems, because what it will return is NIL
which callers will interpret as "couldn't build a physical tlist because
of dropped columns". So you still get a plan that works, though it's
marginally less efficient than it could be. There are also some other
expandRTE() calls associated with transformation of whole-row Vars in
the planner. I have been unable to exhibit misbehavior from that, and
it may be unreachable in any case that anyone would care about ... but
I'm not entirely convinced, so this seems like something we should back-
patch a fix for. Fortunately, we can fix it without forcing a change
of stored rules and a catversion bump, because we can just copy these
lists from the subsidiary TableFunc object.
readfuncs.c was also missing support for NamedTuplestoreScan plan nodes.
This accidentally fails to break parallel query because a query using
a named tuplestore would never be considered parallel-safe anyway.
However, project policy since parallel query came in is that all plan
node types should have outfuncs/readfuncs support, so this is clearly
an oversight that should be repaired.
Noted while fooling around with a patch to test outfuncs/readfuncs more
thoroughly. That exposed some other issues too, but these are the only
ones that seem worth back-patching.
Back-patch to v10 where both of these features came in.
Thomas Munro [Tue, 18 Sep 2018 10:56:36 +0000 (22:56 +1200)]
Allow DSM allocation to be interrupted.
Chris Travers reported that the startup process can repeatedly try to
cancel a backend that is in a posix_fallocate()/EINTR loop and cause it
to loop forever. Teach the retry loop to give up if an interrupt is
pending. Don't actually check for interrupts in that loop though,
because a non-local exit would skip some clean-up code in the caller.
Back-patch to 9.4 where DSM was added (and posix_fallocate() was later
back-patched).
Author: Chris Travers Reviewed-by: Ildar Musin, Murat Kabilov, Oleksii Kliukin Tested-by: Oleksii Kliukin
Discussion: https://postgr.es/m/CAN-RpxB-oeZve_J3SM_6%3DHXPmvEG%3DHX%2B9V9pi8g2YR7YW0rBBg%40mail.gmail.com
Tom Lane [Mon, 17 Sep 2018 17:16:32 +0000 (13:16 -0400)]
Fix parsetree representation of XMLTABLE(XMLNAMESPACES(DEFAULT ...)).
The original coding for XMLTABLE thought it could represent a default
namespace by a T_String Value node with a null string pointer. That's
not okay, though; in particular outfuncs.c/readfuncs.c are not on board
with such a representation, meaning you'll get a null pointer crash
if you try to store a view or rule containing this construct.
To fix, change the parsetree representation so that we have a NULL
list element, instead of a bogus Value node.
This isn't really a functional limitation since default XML namespaces
aren't yet implemented in the executor; you'd just get "DEFAULT
namespace is not supported" anyway. But crashes are not nice, so
back-patch to v10 where this syntax was added. Ordinarily we'd consider
a parsetree representation change to be un-backpatchable; but since
existing releases would crash on the way to storing such constructs,
there can't be any existing views/rules to be incompatible with.
Tom Lane [Mon, 17 Sep 2018 16:11:43 +0000 (12:11 -0400)]
Fix pgbench lexer's "continuation" rule to cope with Windows newlines.
Our general practice in frontend code is to accept input with either
Unix-style newlines (\n) or DOS-style (\r\n). pgbench was mostly down
with that, but its rule for line continuations (backslash-newline) was
not. This had been masked on Windows buildfarm machines before commit 0ba06e0bf by use of Windows text mode to read files. We could have fixed
it by forcing text mode again, but it's better to fix the parsing code
so that Windows-style text files on Unix systems don't cause problems.
Back-patch to v10 where pgbench grew line continuations.
Michael Paquier [Mon, 17 Sep 2018 11:38:42 +0000 (20:38 +0900)]
Allow concurrent-safe open() and fopen() in frontend code for Windows
PostgreSQL uses a custom wrapper for open() and fopen() which is
concurrent-safe, allowing multiple processes to open and work on the
same file. This has a couple of advantages:
- pg_test_fsync does not handle O_DSYNC correctly otherwise, leading to
false claims that disks are unsafe.
- TAP tests can run into race conditions when a postmaster and pg_ctl
open postmaster.pid, fixing some random failures in the buildfam.
pg_upgrade is one frontend tool using workarounds to bypass file locking
issues with the log files it generates, however the interactions with
pg_ctl are proving to be tedious to get rid of, so this is left for
later.
Andrew Gierth [Sun, 16 Sep 2018 17:46:45 +0000 (18:46 +0100)]
Fix out-of-tree build for transform modules.
Neither plperl nor plpython installed sufficient header files to
permit transform modules to be built out-of-tree using PGXS. Fix that
by installing all plperl and plpython header files (other than those
with special purposes such as generated data tables), and also install
plpython's special .mk file for mangling regression tests.
(This commit does not fix the windows install, which does not
currently install _any_ plperl or plpython headers.)
Also fix the existing transform modules for hstore and ltree so that
their cross-module #include directives work as anticipated by commit df163230b9 et seq. This allows them to serve as working examples of
how to reference other modules when doing separate out-of-tree builds.
Tom Lane [Sun, 16 Sep 2018 17:02:47 +0000 (13:02 -0400)]
Add outfuncs.c support for RawStmt nodes.
I noticed while poking at a report from Andrey Lepikhov that the
recent addition of RawStmt nodes at the top of raw parse trees
makes it impossible to print any raw parse trees whatsoever,
because outfuncs.c doesn't know RawStmt and hence fails to descend
into it.
While we generally lack outfuncs.c support for utility statements,
there is reasonably complete support for what you can find in a
raw SELECT statement. It was not my intention to make that all
dead code ... so let's add support for RawStmt.
Tom Lane [Sat, 15 Sep 2018 21:24:35 +0000 (17:24 -0400)]
In v11, disable JIT by default (it's still enabled by default in HEAD).
Per discussion, JIT isn't quite mature enough to ship enabled-by-default.
I failed to resist the temptation to do a bunch of copy-editing on the
related documentation. Also, clean up some inconsistencies in which
section of config.sgml the JIT GUCs are documented in vs. what guc.c
and postgresql.config.sample had.
Tom Lane [Sat, 15 Sep 2018 17:42:34 +0000 (13:42 -0400)]
Fix failure with initplans used conditionally during EvalPlanQual rechecks.
The EvalPlanQual machinery assumes that any initplans (that is,
uncorrelated sub-selects) used during an EPQ recheck would have already
been evaluated during the main query; this is implicit in the fact that
execPlan pointers are not copied into the EPQ estate's es_param_exec_vals.
But it's possible for that assumption to fail, if the initplan is only
reached conditionally. For example, a sub-select inside a CASE expression
could be reached during a recheck when it had not been previously, if the
CASE test depends on a column that was just updated.
This bug is old, appearing to date back to my rewrite of EvalPlanQual in
commit 9f2ee8f28, but was not detected until Kyle Samson reported a case.
To fix, force all not-yet-evaluated initplans used within the EPQ plan
subtree to be evaluated at the start of the recheck, before entering the
EPQ environment. This could be inefficient, if such an initplan is
expensive and goes unused again during the recheck --- but that's piling
one layer of improbability atop another. It doesn't seem worth adding
more complexity to prevent that, at least not in the back branches.
It was convenient to use the new-in-v11 ExecEvalParamExecParams function
to implement this, but I didn't like either its name or the specifics of
its API, so revise that.
Back-patch all the way. Rather than rewrite the patch to avoid depending
on bms_next_member() in the oldest branches, I chose to back-patch that
function into 9.4 and 9.3. (This isn't the first time back-patches have
needed that, and it exhausted my patience.) I also chose to back-patch
some test cases added by commits 71404af2a and 342a1ffa2 into 9.4 and 9.3,
so that the 9.x versions of eval-plan-qual.spec are all the same.
Andrew Gierth diagnosed the problem and contributed the added test cases,
though the actual code changes are by me.
Fix ALTER/TYPE on columns referenced by FKs in partitioned tables
When ALTER TABLE ... SET DATA TYPE affects a column referenced by
constraints and indexes, it drop those constraints and indexes and
recreates them afterwards, so that the definitions match the new data
type. The original code did this by dropping one object at a time
(commit 077db40fa1f3 of May 2004), which worked fine because the
dependencies between the objects were pretty straightforward, and
ordering the objects in a specific way was enough to make this work.
However, when there are foreign key constraints in partitioned tables,
the dependencies are no longer so straightforward, and we were getting
errors when attempted:
ERROR: cache lookup failed for constraint 16398
This can be fixed by doing all the drops in one pass instead, using
performMultipleDeletions (introduced by df18c51f2955 of Aug 2006). With
this change we can also remove the code to carefully order the list of
objects to be deleted.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAKcux6nWS_m+s=1Udk_U9B+QY7pA-Ac58qR5BdUfOyrwnWHDew@mail.gmail.com
Amit Kapila [Fri, 14 Sep 2018 04:21:47 +0000 (09:51 +0530)]
Don't allow LIMIT/OFFSET clause within sub-selects to be pushed to workers.
Allowing sub-select containing LIMIT/OFFSET in workers can lead to
inconsistent results at the top-level as there is no guarantee that the
row order will be fully deterministic. The fix is to prohibit pushing
LIMIT/OFFSET within sub-selects to workers.
Reported-by: Andrew Fletcher
Bug: 15324
Author: Amit Kapila Reviewed-by: Dilip Kumar
Backpatch-through: 9.6
Discussion: https://postgr.es/m/153417684333.10284.11356259990921828616@wrigleys.postgresql.org
Andres Freund [Thu, 13 Sep 2018 17:41:39 +0000 (10:41 -0700)]
Detect LLVM 7 without specifying binaries explicitly.
Before this commit LLVM 7 was supported, but only if one explicitly
provided LLVM_CONFIG= and CLANG= paths. As LLVM 7 is the first
version that includes our upstreamed debugging and profiling features,
and as debian is planning to default to 7 due to wider architecture
support, it seems good to support auto-detecting that version.
Author: Christoph Berg
Discussion: https://postgr.es/m/20180912124517.GD24584@msg.df7cb.de
Backpatch: 11, where LLVM was introduced
Amit Kapila [Thu, 13 Sep 2018 10:08:15 +0000 (15:38 +0530)]
Attach FPI to the first record after full_page_writes is turned on.
XLogInsert fails to attach a required FPI to the first record after
full_page_writes is turned on by the last checkpoint. This bug got
introduced in 9.5 due to code rearrangement in commits 2c03216d83 and 2076db2aea. Fix it by ensuring that XLogInsertRecord performs a
recomputation when the given record is generated with FPW as off but
found that the flag has been turned on while actually inserting the
record.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi Reviewed-by: Amit Kapila
Backpatch-through: 9.5 where this problem was introduced
Discussion: https://postgr.es/m/20180420.151043.74298611.horiguchi.kyotaro@lab.ntt.co.jp
Andrew Gierth [Wed, 12 Sep 2018 18:31:06 +0000 (19:31 +0100)]
Repair bug in regexp split performance improvements.
Commit c8ea87e4b introduced a temporary conversion buffer for
substrings extracted during regexp splits. Unfortunately the code that
sized it was failing to ignore the effects of ignored degenerate
regexp matches, so for regexp_split_* calls it could under-size the
buffer in such cases.
Fix, and add some regression test cases (though those will only catch
the bug if run in a multibyte encoding).
Backpatch to 9.3 as the faulty code was.
Thanks to the PostGIS project, Regina Obe and Paul Ramsey for the
report (via IRC) and assistance in analysis. Patch by me.
Tom Lane [Tue, 11 Sep 2018 20:32:12 +0000 (16:32 -0400)]
Remove ruleutils.c's special case for BIT [VARYING] literals.
Up to now, get_const_expr() insisted on prefixing BIT and VARBIT
literals with 'B'. That's not really necessary, because we always
append explicit-cast syntax to identify the constant's type.
Moreover, it's subtly wrong for VARBIT, because the parser will
interpret B'...' as '...'::"bit"; see make_const() which explicitly
assigns type BITOID for a T_BitString literal. So what had been
a simple VARBIT literal is reconstructed as ('...'::"bit")::varbit,
which is not the same thing, at least not before constant folding.
This results in odd differences after dump/restore, as complained
of by the patch submitter, and it could result in actual failures in
partitioning or inheritance DDL operations (see commit 542320c2b,
which repaired similar misbehaviors for some other data types).
Fixing it is pretty easy: just remove the special case and let the
default code path handle these types. We could have kept the special
case for BIT only, but there seems little point in that.
Like the previous patch, I judge that back-patching this into stable
branches wouldn't be a good idea. However, it seems not quite too
late for v11, so let's fix it there.
Paul Guo, reviewed by Davy Machado and John Naylor, minor adjustments
by me
Andrew Gierth [Tue, 11 Sep 2018 17:14:19 +0000 (18:14 +0100)]
Repair double-free in SP-GIST rescan (bug #15378)
spgrescan would first reset traversalCxt, and then traverse a
potentially non-empty stack containing pointers to traversalValues
which had been allocated in those contexts, freeing them a second
time. This bug originates in commit ccd6eb49a where traversalValue was
introduced.
Repair by traversing the stack before the context reset; this isn't
ideal, since it means doing retail pfree in a context that's about to
be reset, but the freeing of a stack entry is also done in other
places in the code during the scan so it's not worth trying to
refactor it further. Regression test added.
Backpatch to 9.6 where the problem was introduced.
Per bug #15378; analysis and patch by me, originally from a report on
IRC by user velix; see also PostGIS ticket #4174; review by Alexander
Korotkov.
Tom Lane [Tue, 11 Sep 2018 02:22:12 +0000 (22:22 -0400)]
Use -Bsymbolic for shared libraries on HP-UX and Solaris.
These platforms are also subject to the mis-linking problem addressed
in commit e3d77ea6b. It's not clear whether we could solve it with
a solution equivalent to GNU ld's version scripts, but -Bsymbolic
appears to fix it, so let's use that.
Like the previous commit, back-patch as far as v10.
Tom Lane [Sun, 9 Sep 2018 19:16:51 +0000 (15:16 -0400)]
Prevent mis-linking of src/port and src/common functions on *BSD.
On ELF-based platforms (and maybe others?) it's possible for a shared
library, when dynamically loaded into the backend, to call the backend
versions of src/port and src/common functions rather than the frontend
versions that are actually linked into the shlib. This is the cause
of bug #15367 from Jeremy Evans, and is likely to lead to more problems
in future; it's accidental that we've failed to notice any bad effects
up to now.
The recommended way to fix this on ELF-based platforms is to use a
linker "version script" that makes the shlib's versions of the functions
local. (Apparently, -Bsymbolic would fix it as well, but with other
side effects that we don't want.) Doing so has the additional benefit
that we can make sure the shlib only exposes the symbols that are meant
to be part of its API, and not ones that are just for cross-file
references within the shlib. So we'd already been using a version
script for libpq on popular platforms, but it's now apparent that it's
necessary for correctness on every ELF-based platform.
Hence, add appropriate logic to the openbsd, freebsd, and netbsd stanzas
of Makefile.shlib; this is just a copy-and-paste from the linux stanza.
There may be additional work to do if commit ed0cdf0e0 reveals that the
problem exists elsewhere, but this is all that is known to be needed
right now.
Back-patch to v10 where SCRAM support came in. The problem is ancient,
but analysis suggests that there were no really severe consequences
in older branches. Hence, I won't take the risk of such a large change
in the build process for older branches.
In passing, remove a rather opaque comment about -Bsymbolic; I don't
think it's very on-point about why we don't use that, if indeed that's
what it's talking about at all.
Patch by me; thanks to Andrew Gierth for helping to diagnose the problem,
and for additional testing.
ginRedoRecompress() replays actions over compressed segments of posting list
in-place. However, it might lead to write past pg_upper, because intermediate
state during playing the changes can take more space than both original state
and final state. This commit fixes that by refuse from in-place modification.
Instead page tail is copied once modification is started, and then it's used
as the source of original segments. Backpatch to 9.4 where posting list
compression was introduced.
Reported-by: Sivasubramanian Ramasubramanian
Discussion: https://postgr.es/m/1536091151804.6588%40amazon.com
Author: Alexander Korotkov based on patch from and ideas by Sivasubramanian Ramasubramanian
Review: Sivasubramanian Ramasubramanian
Backpatch-through: 9.4
Buildfarm member tern failed src/bin/pg_ctl/t/001_start_stop.pl when a
check_mode_recursive() call overlapped a server's startup-time deletion
of pg_stat/global.stat. Just warn. Also, include errno in the message.
Back-patch to v11, where check_mode_recursive() first appeared.
Tom Lane [Sat, 8 Sep 2018 22:20:36 +0000 (18:20 -0400)]
Minor cleanup/future-proofing for pg_saslprep().
Ensure that pg_saslprep() initializes its output argument to NULL in
all failure paths, and then remove the redundant initialization that
some (not all) of its callers did. This does not fix any live bug,
but it reduces the odds of future bugs of omission.
Also add a comment about why the existing failure-path coding is
adequate.
Back-patch so as to keep the function's API consistent across branches,
again to forestall future bug introduction.
Tom Lane [Sat, 8 Sep 2018 00:09:57 +0000 (20:09 -0400)]
Save/restore SPI's global variables in SPI_connect() and SPI_finish().
This patch removes two sources of interference between nominally
independent functions when one SPI-using function calls another,
perhaps without knowing that it does so.
Chapman Flack pointed out that xml.c's query_to_xml_internal() expects
SPI_tuptable and SPI_processed to stay valid across datatype output
function calls; but it's possible that such a call could involve
re-entrant use of SPI. It seems likely that there are similar hazards
elsewhere, if not in the core code then in third-party SPI users.
Previously SPI_finish() reset SPI's API globals to zeroes/nulls, which
would typically make for a crash in such a situation. Restoring them
to the values they had at SPI_connect() seems like a considerably more
useful behavior, and it still meets the design goal of not leaving any
dangling pointers to tuple tables of the function being exited.
Also, cause SPI_connect() to reset these variables to zeroes/nulls after
saving them. This prevents interference in the opposite direction: it's
possible that a SPI-using function that's only ever been tested standalone
contains assumptions that these variables start out as zeroes. That was
the case as long as you were the outermost SPI user, but not so much for
an inner user. Now it's consistent.
Report and fix suggestion by Chapman Flack, actual patch by me.
Back-patch to all supported branches.
Tom Lane [Fri, 7 Sep 2018 22:13:29 +0000 (18:13 -0400)]
Limit depth of forced recursion for CLOBBER_CACHE_RECURSIVELY.
It's somewhat surprising that we got away with this before. (Actually,
since nobody tests this routinely AFAIK, it might've been broken for
awhile. But it's definitely broken in the wake of commit f868a8143.)
It seems sufficient to limit the forced recursion to a small number
of levels.
Back-patch to all supported branches, like the preceding patch.
Tom Lane [Fri, 7 Sep 2018 22:04:38 +0000 (18:04 -0400)]
Fix longstanding recursion hazard in sinval message processing.
LockRelationOid and sibling routines supposed that, if our session already
holds the lock they were asked to acquire, they could skip calling
AcceptInvalidationMessages on the grounds that we must have already read
any remote sinval messages issued against the relation being locked.
This is normally true, but there's a critical special case where it's not:
processing inside AcceptInvalidationMessages might attempt to access system
relations, resulting in a recursive call to acquire a relation lock.
Hence, if the outer call had acquired that same system catalog lock, we'd
fall through, despite the possibility that there's an as-yet-unread sinval
message for that system catalog. This could, for example, result in
failure to access a system catalog or index that had just been processed
by VACUUM FULL. This is the explanation for buildfarm failures we've been
seeing intermittently for the past three months. The bug is far older
than that, but commits a54e1f158 et al added a new recursion case within
AcceptInvalidationMessages that is apparently easier to hit than any
previous case.
To fix this, we must not skip calling AcceptInvalidationMessages until
we have *finished* a call to it since acquiring a relation lock, not
merely acquired the lock. (There's already adequate logic inside
AcceptInvalidationMessages to deal with being called recursively.)
Fortunately, we can implement that at trivial cost, by adding a flag
to LOCALLOCK hashtable entries that tracks whether we know we have
completed such a call.
There is an API hazard added by this patch for external callers of
LockAcquire: if anything is testing for LOCKACQUIRE_ALREADY_HELD,
it might be fooled by the new return code LOCKACQUIRE_ALREADY_CLEAR
into thinking the lock wasn't already held. This should be a fail-soft
condition, though, unless something very bizarre is being done in
response to the test.
Also, I added an additional output argument to LockAcquireExtended,
assuming that that probably isn't called by any outside code given
the very limited usefulness of its additional functionality.
Andrew Gierth [Fri, 7 Sep 2018 12:51:30 +0000 (13:51 +0100)]
Refactor installation of extension headers.
Commit be54b3777 failed on gmake 3.80 due to a chained conditional,
which on closer examination could be removed entirely with some
refactoring elsewhere for a net simplification and more robustness
against empty expansions. Along the way, add some more comments.
Also make explicit in the documentation and comments that built
headers are not removed by 'make clean', since we don't typically want
that for headers generated by a separate ./configure step, and it's
much easier to add your own 'distclean' rule or use EXTRA_CLEAN than
to try and override a deletion rule in pgxs.mk.
Per buildfarm member prariedog and comments by Michael Paquier, though
all the actual changes are my fault.
Tom Lane [Thu, 6 Sep 2018 14:49:45 +0000 (10:49 -0400)]
Make contrib/unaccent's unaccent() function work when not in search path.
Since the fixes for CVE-2018-1058, we've advised people to schema-qualify
function references in order to fix failures in code that executes under
a minimal search_path setting. However, that's insufficient to make the
single-argument form of unaccent() work, because it looks up the "unaccent"
text search dictionary using the search path.
The most expedient answer seems to be to remove the search_path dependency
by making it look in the same schema that the unaccent() function itself
is declared in. This will definitely work for the normal usage of this
function with the unaccent dictionary provided by the extension.
It's barely possible that there are people who were relying on the
search-path-dependent behavior to select other dictionaries with the same
name; but if there are any such people at all, they can still get that
behavior by writing unaccent('unaccent', ...), or possibly
unaccent('unaccent'::text::regdictionary, ...) if the lookup has to be
postponed to runtime.
Per complaint from Gunnlaugur Thor Briem. Back-patch to all supported
branches.
Amit Kapila [Thu, 6 Sep 2018 04:37:18 +0000 (10:07 +0530)]
Fix the overrun in hash index metapage for smaller block sizes.
The commit 620b49a1 changed the value of HASH_MAX_BITMAPS with the intent
to allow many non-unique values in hash indexes without worrying to reach
the limit of the number of overflow pages. At that time, this didn't
occur to us that it can overrun the block for smaller block sizes.
Choose the value of HASH_MAX_BITMAPS based on BLCKSZ such that it gives
the same answer as now for the cases where the overrun doesn't occur, and
some other sufficiently-value for the cases where an overrun currently
does occur. This allows us not to change the behavior in any case that
currently works, so there's really no reason for a HASH_VERSION bump.
Author: Dilip Kumar Reviewed-by: Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/CAA4eK1LtF4VmU4mx_+i72ff1MdNZ8XaJMGkt2HV8+uSWcn8t4A@mail.gmail.com
Andrew Gierth [Wed, 5 Sep 2018 21:01:21 +0000 (22:01 +0100)]
Allow extensions to install built as well as unbuilt headers.
Commit df163230b overlooked the case that an out-of-tree extension
might need to build its header files (e.g. via ./configure). If it is
also doing a VPATH build, the HEADERS_* rules in the original commit
would then fail to find the files, since they would be looking only
under $(srcdir) and not in the build directory.
Fix by adding HEADERS_built and HEADERS_built_$(MODULE) which behave
like DATA_built in that they look in the build dir rather than the
source dir (and also make the files dependencies of the "all" target).
No Windows support appears to be needed for this, since it is only
relevant to out-of-tree builds (no support exists in Mkvcbuild.pm to
build extension header files in any case).
Tom Lane [Wed, 5 Sep 2018 17:47:16 +0000 (13:47 -0400)]
Make argument names of pg_get_object_address consistent, and fix docs.
pg_get_object_address and pg_identify_object_as_address are supposed
to be inverses, but they disagreed as to the names of the arguments
representing the textual form of an object address. Moreover, the
documented argument names didn't agree with reality at all, either
for these functions or pg_identify_object.
In HEAD and v11, I think we can get away with renaming the input
arguments of pg_get_object_address to match the outputs of
pg_identify_object_as_address. In theory that might break queries
using named-argument notation to call pg_get_object_address, but
it seems really unlikely that anybody is doing that, or that they'd
have much trouble adjusting if they were. In older branches, we'll
just live with the lack of consistency.
Aside from fixing the documentation of these functions to match reality,
I couldn't resist the temptation to do some copy-editing.
Per complaint from Jean-Pierre Pelletier. Back-patch to 9.5 where these
functions were introduced. (Before v11, this is a documentation change
only.)
In the original code, we were storing the pg_inherits row for a
partitioned table too early: enough that we had a hack for relcache to
avoid falling flat on its face while reading such a partial entry. If
we finish the pg_class creation first and *then* store the pg_inherits
entry, we don't need that hack.
Also recognize that pg_class.relpartbound is not marked NOT NULL and
therefore it's entirely possible to read null values, so having only
Assert() protection isn't enough. Change those to if/elog tests
instead. This qualifies as a robustness fix, so backpatch to pg11.
In passing, remove one access that wasn't actually needed, and reword
one message to be like all the others that check for the same thing.
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20180903213916.hh6wasnrdg6xv2ud@alvherre.pgsql
Bruce Momjian [Wed, 5 Sep 2018 02:34:07 +0000 (22:34 -0400)]
docs: improve AT TIME ZONE description
The previous description was unclear. Also add a third example, change
use of time zone acronyms to more verbose descriptions, and add a
mention that using 'time' with AT TIME ZONE uses the current time zone
rules.
Tom Lane [Tue, 4 Sep 2018 17:45:35 +0000 (13:45 -0400)]
Fully enforce uniqueness of constraint names.
It's been true for a long time that we expect names of table and domain
constraints to be unique among the constraints of that table or domain.
However, the enforcement of that has been pretty haphazard, and it missed
some corner cases such as creating a CHECK constraint and then an index
constraint of the same name (as per recent report from André Hänsel).
Also, due to the lack of an actual unique index enforcing this, duplicates
could be created through race conditions.
Moreover, the code that searches pg_constraint has been quite inconsistent
about how to handle duplicate names if one did occur: some places checked
and threw errors if there was more than one match, while others just
processed the first match they came to.
To fix, create a unique index on (conrelid, contypid, conname). Since
either conrelid or contypid is zero, this will separately enforce
uniqueness of constraint names among constraints of any one table and any
one domain. (If we ever implement SQL assertions, and put them into this
catalog, more thought might be needed. But it'd be at least as reasonable
to put them into a new catalog; having overloaded this one catalog with
two kinds of constraints was a mistake already IMO.) This index can replace
the existing non-unique index on conrelid, though we need to keep the one
on contypid for query performance reasons.
Having done that, we can simplify the logic in various places that either
coped with duplicates or neglected to, as well as potentially improve
lookup performance when searching for a constraint by name.
Also, as per our usual practice, install a preliminary check so that you
get something more friendly than a unique-index violation report in the
case complained of by André. And teach ChooseIndexName to avoid choosing
autogenerated names that would draw such a failure.
While it's not possible to make such a change in the back branches,
it doesn't seem quite too late to put this into v11, so do so.
Amit Kapila [Tue, 4 Sep 2018 04:56:06 +0000 (10:26 +0530)]
Prohibit pushing subqueries containing window function calculation to
workers.
Allowing window function calculation in workers leads to inconsistent
results because if the input row ordering is not fully deterministic, the
output of window functions might vary across workers. The fix is to treat
them as parallel-restricted.
In the passing, improve the coding pattern in max_parallel_hazard_walker
so that it has a chain of mutually-exclusive if ... else if ... else if
... else if ... IsA tests.
Reported-by: Marko Tiikkaja
Bug: 15324
Author: Amit Kapila Reviewed-by: Tom Lane
Backpatch-through: 9.6
Discussion: https://postgr.es/m/CAL9smLAnfPJCDUUG4ckX2iznj53V7VSMsYefzZieN93YxTNOcw@mail.gmail.com
Amit Kapila [Tue, 4 Sep 2018 03:03:33 +0000 (08:33 +0530)]
During the split, set checksum on an empty hash index page.
On a split, we allocate a new splitpoint's worth of bucket pages wherein
we initialize the last page with zeros which is fine, but we forgot to set
the checksum for that last page.
We decided to back-patch this fix till 10 because we don't have an easy
way to test it in prior versions. Another reason is that the hash-index
code is changed heavily in 10, so it is not advisable to push the fix
without testing it in prior versions.
Author: Amit Kapila Reviewed-by: Yugo Nagata
Backpatch-through: 10
Discussion: https://postgr.es/m/5d03686d-727c-dbf8-0064-bf8b97ffe850@2ndquadrant.com
This column was added in commit 8224de4f42cc ("Indexes with INCLUDE
columns and their support in B-tree") to ease writing the ruleutils.c
supporting code for that feature, but it turns out to be unnecessary --
we can do the same thing with just one more syscache lookup.
Even the documentation for the new column being removed in this commit
is awkward.
Tomas Vondra [Mon, 3 Sep 2018 00:10:24 +0000 (02:10 +0200)]
Fix memory leak in TRUNCATE decoding
When decoding a TRUNCATE record, the relids array was being allocated in
the main ReorderBuffer memory context, but not released with the change
resulting in a memory leak.
The array was also ignored when serializing/deserializing the change,
assuming all the information is stored in the change itself. So when
spilling the change to disk, we've only we have serialized only the
pointer to the relids array. Thanks to never releasing the array,
the pointer however remained valid even after loading the change back
to memory, preventing an actual crash.
This fixes both the memory leak and (de)serialization. The relids array
is still allocated in the main ReorderBuffer memory context (none of the
existing ones seems like a good match, and adding an extra context seems
like an overkill). The allocation is wrapped in a new ReorderBuffer API
functions, to keep the details within reorderbuffer.c, just like the
other ReorderBufferGet methods do.
Author: Tomas Vondra
Discussion: https://www.postgresql.org/message-id/flat/66175a41-9342-2845-652f-1bd4c3ee50aa%402ndquadrant.com
Backpatch: 11, where decoding of TRUNCATE was introduced
Michael Paquier [Sun, 2 Sep 2018 19:40:38 +0000 (12:40 -0700)]
Fix initial sync of slot parent directory when restoring status
At the beginning of recovery, information from replication slots is
recovered from disk to memory. In order to ensure the durability of the
information, the status file as well as its parent directory are
synced. It happens that the sync on the parent directory was done
directly using the status file path, which is logically incorrect, and
the current code has been doing a sync on the same object twice in a
row.
Reported-by: Konstantin Knizhnik Diagnosed-by: Konstantin Knizhnik
Author: Michael Paquier
Discussion: https://postgr.es/m/9eb1a6d5-b66f-2640-598d-c5ea46b8f68a@postgrespro.ru
Backpatch-through: 9.4-
Tom Lane [Sat, 1 Sep 2018 20:02:47 +0000 (16:02 -0400)]
Doc: fix oversights in "Client/Server Character Set Conversions" table.
This table claimed that JOHAB could be used as a server encoding, which
was true originally but hasn't been true since 8.3. It also lacked
entries for EUC_JIS_2004 and SHIFT_JIS_2004.
JOHAB problem noted by Lars Kanis, the others by me.
Tom Lane [Sat, 1 Sep 2018 19:27:13 +0000 (15:27 -0400)]
Avoid using potentially-under-aligned page buffers.
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Ignore server-side delays when enforcing wal_sender_timeout.
Healthy clients of servers having poor I/O performance, such as
buildfarm members hamster and tern, saw unexpected timeouts. That
disagreed with documentation. This fix adds one gettimeofday() call
whenever ProcessRepliesIfAny() finds no client reply messages.
Back-patch to 9.4; the bug's symptom is rare and mild, and the code all
moved between 9.3 and 9.4.
Andres Freund [Fri, 31 Aug 2018 23:56:11 +0000 (16:56 -0700)]
Fix 8a934d677 for libc++ and make more include order resistant.
The previous definition was used in C++ mode, which causes problems
when using clang with libc++ (rather than libstdc++), due to bugs
therein. So just avoid in C++ mode.
A second problem is that depending on include order and implicit
includes the previous definition did not guarantee that the current
hack was effective by the time isinf was used, fix that by forcing
math.h to be included. This can cause clang using builds, or gcc
using ones with JIT enabled, to slow down noticably.
It's likely that we at some point want a better solution for the
performance problem, but while it's there it should better work.
Reported-By: Steven Winfield
Bug: #15270
Discussion: https://postgr.es/m/153116283147.1401.360416241833049560@wrigleys.postgresql.org
Author: Andres Freund
Backpatch: 11, like the previous commit.
Tom Lane [Fri, 31 Aug 2018 20:45:33 +0000 (16:45 -0400)]
Fix psql's \dC command to annotate I/O conversion casts as such.
A cast declared WITH INOUT was described as '(binary coercible)',
which seems pretty inaccurate; let's print '(with inout)' instead.
Per complaint from Jean-Pierre Pelletier.
This definitely seems like a bug fix, but given that it's been wrong
since 8.4 and nobody complained before, I'm hesitant to back-patch a
behavior change into stable branches. It doesn't seem too late for
v11 though.
Michael Paquier [Fri, 31 Aug 2018 18:03:55 +0000 (11:03 -0700)]
Ensure correct minimum consistent point on standbys
Startup process has improved its calculation of incorrect minimum
consistent point in 8d68ee6, which ensures that all WAL available gets
replayed when doing crash recovery, and has introduced an incorrect
calculation of the minimum recovery point for non-startup processes,
which can cause incorrect page references on a standby when for example
the background writer flushed a couple of pages on-disk but was not
updating the control file to let a subsequent crash recovery replay to
where it should have.
The only case where this has been reported to be a problem is when a
standby needs to calculate the latest removed xid when replaying a btree
deletion record, so one would need connections on a standby that happen
just after recovery has thought it reached a consistent point. Using a
background worker which is started after the consistent point is reached
would be the easiest way to get into problems if it connects to a
database. Having clients which attempt to connect periodically could
also be a problem, but the odds of seeing this problem are much lower.
The fix used is pretty simple, as the idea is to give access to the
minimum recovery point written in the control file to non-startup
processes so as they use a reference, while the startup process still
initializes its own references of the minimum consistent point so as the
original problem with incorrect page references happening post-promotion
with a crash do not show up.
Reported-by: Alexander Kukushkin Diagnosed-by: Alexander Kukushkin
Author: Michael Paquier Reviewed-by: Kyotaro Horiguchi, Alexander Kukushkin
Discussion: https://postgr.es/m/153492341830.1368.3936905691758473953@wrigleys.postgresql.org
Backpatch-through: 9.3
Tom Lane [Fri, 31 Aug 2018 17:42:18 +0000 (13:42 -0400)]
Code review for pg_verify_checksums.c.
Use postgres_fe.h, since this is frontend code. Pretend that we've heard
of project style guidelines for, eg, #include order. Use BlockNumber not
int arithmetic for block numbers, to avoid misbehavior with relations
exceeding 2^31 blocks. Avoid an unnecessary strict-aliasing warning
(per report from Michael Banck). Const-ify assorted stuff. Avoid
scribbling on the output of readdir() -- perhaps that's safe in practice,
but POSIX forbids it, and this code has so far earned exactly zero
credibility portability-wise. Editorialize on an ambiguously-worded
message.
I did not touch the problem of the "buf" local variable being possibly
insufficiently aligned; that's not specific to this code, and seems like
it should be fixed as part of a different, larger patch.
Enforce cube dimension limit in all cube construction functions
contrib/cube has a limit to 100 dimensions for cube datatype. However, it's
not enforced everywhere, and one can actually construct cube with more than
100 dimensions having then trouble with dump/restore. This commit add checks
for dimensions limit in all functions responsible for cube construction.
Backpatch to all supported versions.
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87va7uybt4.fsf%40news-spur.riddles.org.uk
Author: Andrey Borodin with small additions by me
Review: Tom Lane
Backpatch-through: 9.3
Split contrib/cube platform-depended checks into separate test
We're currently maintaining two outputs for cube regression test. But that
appears to be unsuitable, because these outputs are different in out few checks
involving scientific notation. So, split checks involving scientific notation
into separate test, making contrib/cube easier to maintain. Backpatch to all
supported versions in order to make further backpatching easier.
Discussion: https://postgr.es/m/CAPpHfdvJgWjxHsJTtT%2Bo1tz3OR8EFHcLQjhp-d3%2BUcmJLh-fQA%40mail.gmail.com
Author: Alexander Korotkov
Backpatch-through: 9.3
Tom Lane [Fri, 31 Aug 2018 16:26:20 +0000 (12:26 -0400)]
Make checksum_impl.h safe to compile with -fstrict-aliasing.
In general, Postgres requires -fno-strict-aliasing with compilers that
implement C99 strict aliasing rules. There's little hope of getting
rid of that overall. But it seems like it would be a good idea if
storage/checksum_impl.h in particular didn't depend on it, because
that header is explicitly intended to be included by external programs.
We don't have a lot of control over the compiler switches that an
external program might use, as shown by Michael Banck's report of
failure in a privately-modified version of pg_verify_checksums.
Hence, switch to using a union in place of willy-nilly pointer casting
inside this file. I think this makes the code a bit more readable
anyway.
checksum_impl.h hasn't changed since it was introduced in 9.3,
so back-patch all the way.
Etsuro Fujita [Fri, 31 Aug 2018 11:47:17 +0000 (20:47 +0900)]
Disable support for partitionwise joins in problematic cases.
Commit f49842d, which added support for partitionwise joins, built the
child's tlist by applying adjust_appendrel_attrs() to the parent's. So in
the case where the parent's included a whole-row Var for the parent, the
child's contained a ConvertRowtypeExpr. To cope with that, that commit
added code to the planner, such as setrefs.c, but some code paths still
assumed that the tlist for a scan (or join) rel would only include Vars
and PlaceHolderVars, which was true before that commit, causing errors:
* When creating an explicit sort node for an input path for a mergejoin
path for a child join, prepare_sort_from_pathkeys() threw the 'could not
find pathkey item to sort' error.
* When deparsing a relation participating in a pushed down child join as a
subquery in contrib/postgres_fdw, get_relation_column_alias_ids() threw
the 'unexpected expression in subquery output' error.
* When performing set_plan_references() on a local join plan generated by
contrib/postgres_fdw for EvalPlanQual support for a pushed down child
join, fix_join_expr() threw the 'variable not found in subplan target
lists' error.
To fix these, two approaches have been proposed: one by Ashutosh Bapat and
one by me. While the former keeps building the child's tlist with a
ConvertRowtypeExpr, the latter builds it with a whole-row Var for the
child not to violate the planner assumption, and tries to fix it up later,
But both approaches need more work, so refuse to generate partitionwise
join paths when whole-row Vars are involved, instead. We don't need to
handle ConvertRowtypeExprs in the child's tlists for now, so this commit
also removes the changes to the planner.
Previously, partitionwise join computed attr_needed data for each child
separately, and built the child join's tlist using that data, which also
required an extra step for adding PlaceHolderVars to that tlist, but it
would be more efficient to build it from the parent join's tlist through
the adjust_appendrel_attrs() transformation. So this commit builds that
list that way, and simplifies build_joinrel_tlist() and placeholder.c as
well as part of set_append_rel_size() to basically what they were before
partitionwise join went in.
Back-patch to PG11 where partitionwise join was introduced.
Report by Rajkumar Raghuwanshi. Analysis by Ashutosh Bapat, who also
provided some of regression tests. Patch by me, reviewed by Robert Haas.
Amit Kapila [Fri, 31 Aug 2018 10:15:09 +0000 (15:45 +0530)]
Fix pg_verify_checksums on Windows.
To verify the checksums, we open the file in text mode which doesn't work
on Windows as WIN32 treats Control-Z as EOF in files opened in text mode.
This leads to "short read of block .." error in some cases.
Fix it by opening the files in the binary mode.
Author: Amit Kapila Reviewed-by: Magnus Hagander
Backpatch-through: 11
Discussion: https://postgr.es/m/CAA4eK1+LOnzod+h85FGmyjWzXKy-XV1FYwEyP-Tky2WpD5cxwA@mail.gmail.com
projects / postgresql / log